aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mvebu: Correct regulatory country of WRT3200ACMKabuli Chana2020-10-111-1/+1
| | | | | | | | | | correct oversight on setting regulatory country and mac address of wireless configuration change method of retrieving mac address The MAC address for eth0 is rad out of the devinfo partition in some other initial configuration script already. Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mvebu: add wrt3200acm to 03_wireless CCKabuli Chana2020-10-111-0/+1
| | | | | | | | | correct device CC oversight Set the initial wifi configuration like for the other similar Linksys devices. Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mvebu: armada-37xx: espressobin: Backport patch for ethernet switch aliasesPali Rohár2020-10-115-5/+139
| | | | Signed-off-by: Pali Rohár <pali@kernel.org>
* mvebu: armada-37xx: Backport PCI aardvark patchesPali Rohár2020-10-1112-0/+1041
| | | | | | | | This commit contains patches for PCI aardvark driver and relevant DTS changes for Turris MOX and EspressoBin backported from mainline kernel. It fixes support for old ATF, various wifi cards, mainly Compex WLE900VX. Signed-off-by: Pali Rohár <pali@kernel.org>
* scripts/qemustart: update malta to use MIPS64 R2 cpuTony Ambardar2020-10-111-1/+3
| | | | | | | | | | | Explicitly set the QEMU cpu type and support the MIPS R2 ISA, for both 64-bit and 32-bit targets. The later previously supported MIPS R2 by implicit default. This is needed after commit 93608697f3 ("malta: update MIPS64 ISA to R2"), otherwise booting malta images with scripts/qemustart will hang. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* malta: update MIPS64 ISA to R2Tony Ambardar2020-10-116-6/+25
| | | | | | | | | | | | | | | | | | | | Usage of current R1 ISA is inconsistent with the MIPS32 subtarget, little used and has limited utility for testing. Many distros target a minimum R2 ISA. Debian MIPS 32-bit/64-bit ports all use MIPS R2 ISA since Stretch, for example. Fedora's MIPS arch also targets the R2 ISA for 32-bit/64-bit. Widely used MIPS64 platforms like Octeon are based on the MIPS R2 ISA or later, and benefit from having a compatible test platform in OpenWRT. While Linux does support MIPS64 R1 targets, its usefulness for development and testing is limited. As an example, the modern Linux eBPF JIT requires a MIPS R2 ISA or later. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> [Refresh config and fix README] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* trace-cmd: disable AUDIT (libaudit library)Josef Schlehofer2020-10-111-1/+2
| | | | | | | | | | | | | If you compile first libaudit library and then trace-cmd package, compilations fails with: Package trace-cmd is missing dependencies for the following libraries: libaudit.so.1 If you enable libaudit for trace-cmd, it will show system name calls while using command profile. Try to be slim as much as possible - libaudit .ipk has 42,4 kB. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* perf: disable libzstd supportRosen Penev2020-10-111-1/+2
| | | | | | | | | | | libzstd from the packages feed gets picked up. Remove it. Fixes: Package perf is missing dependencies for the following libraries: libzstd.so.1 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* perf: pass CFLAGS correctlyMarek Behún2020-10-111-1/+1
| | | | | | | For this package CFLAGS have to be passed via EXTRA_CFLAGS. On arm this bug causes build to fail because no -fPIC is present in CFLAGS. Signed-off-by: Marek Behún <kabel@blackhole.sk>
* perf: fix building with musl when NLS is enabledMarek Behún2020-10-111-0/+3
| | | | | | | | | | | This package fails with a strange error when building with musl when NLS is enabled. The configuration thinks that libelf is not present, even though DEPENDS contains +libelf, because when NLS is enabled, libelf.so depends on libintl, and the correct LDFLAGS are missing for libintl-full. This then causes the configuration script to check for glibc, but this fails because we are using musl. Signed-off-by: Marek Behún <kabel@blackhole.sk>
* netifd: update to latest git HEADHans Dedecker2020-10-101-3/+3
| | | | | | 64ff909 system-linux: initialize ifreq struct before using it Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm63xx: move dts-v1 statement to top-level DTSI filesAdrian Schmutzler2020-10-10107-194/+20
| | | | | | | | | | | The "/dts-v1/;" identifier is supposed to be present once at the top of a device tree file after the includes have been processed. Like done for other targets recently, put the dts-v1 statement into the top-level SoC-based DTSI files, and remove all other occurences. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: add a few DTSI files to share definitionsAdrian Schmutzler2020-10-1011-846/+389
| | | | | | | | After the LED labels have been made more general by removing the model names, we can move several definitions to DTSI files to reduce the amount of duplicate code. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm63xx: remove model name from LED labelsAdrian Schmutzler2020-10-1090-631/+639
| | | | | | | | | | | | | | | | Like in the previous patches for various targets, this will remove the "devicename" from LED labels in bcm63xx, as it's useless and only creates complexity. The devicename is removed in DTS files and 01_leds, merging several cases on the way. A migration script is added for existing configurations. Note that a few labels were using "model::function" scheme without color specified, those were converting to just "function" and the necessary migrations were added to the migration script. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to genericDaniel Golle2020-10-0924-32/+4
| | | | | | | | Similar to how it was already done for other filesystems' *_FS_XATTR kernel config symbols, also move CONFIG_F2FS_FS_XATTR=y and CONFIG_F2FS_STAT_FS=y to target/linux/generic. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.70John Audia2020-10-091-2/+2
| | | | | | | | | | | | All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* ath79: drop redundant gpios on i2cAdrian Schmutzler2020-10-092-8/+0
| | | | | | | | | Since "sda-gpios" and "scl-gpios" are only available since kernel 4.19, a few devices have redundantly defined "gpios" to also support older kernels. Since we have nothing older than 4.19 now, we can remove the redundant definitions. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: drop kernel version switchesAdrian Schmutzler2020-10-093-35/+2
| | | | | | | The ramips target only supports 5.4, so drop all kernel version switches for older kernels there. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* seclic: depends on libsepolDaniel Golle2020-10-091-0/+1
| | | | | | | Add missing dependency for target build of seclic which requires libsepol (just like the host build requires libsepol/host). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: fix qc_prep return in sata driver after kernel 5.4.69Adrian Schmutzler2020-10-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | This fixes a regression after a kernel change in 5.4.69 [1] that led to build failure on oxnas/ox820: drivers/ata/sata_oxnas.c:2238:13: error: initialization of 'enum ata_completion_errors (*)(struct ata_queued_cmd *)' from incompatible pointer type 'void (*)(struct ata_queued_cmd *)' [-Werror=incompatible-pointer-types] .qc_prep = sata_oxnas_qc_prep, ^~~~~~~~~~~~~~~~~~ drivers/ata/sata_oxnas.c:2238:13: note: (near initialization for 'sata_oxnas_ops.qc_prep') Our local driver is changed the same way as prototyped in the kernel patch, i.e. return type is changed and AC_ERR_OK return value is added. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e11c83520cd04b813cd1748ee2a8f2c620e5f7e3 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: 5.4: move AR40xx driver into filesRobert Marko2020-10-093-2466/+2460
| | | | | | | | | | | | There is no point in keeping the AR40xx driver as a patch as its not pending merge or backport. To allow for easier maintenance until DSA is ready move it into files like EDMA is. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [combine with removal from patches-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* config: add option for dssp selinux policyDaniel Golle2020-10-091-1/+4
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* selinux-policy: adds new packageDominick Grift2020-10-092-0/+55
| | | | Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: adds new packageDominick Grift2020-10-091-0/+65
| | | | Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* rt2x00: mt7620: differentiate based on SoC's CHIP_VERDaniel Golle2020-10-092-0/+547
| | | | | | | | | | | | | | | | | | | | | | | The vendor driver does things differently based on what it finds in the SoC's CHIP_VER register, which should tell whether this is MT7620N or MT7620A (PKG) and probably also the revision (VER) and most likely also something about the silicon implementer (ECO). Introduce codepaths just like the ones in the vendor driver to handle the different chips properly. Some of those paths are most likely dead code and left-overs from FPGA versions or early prototypes of the chip. It'd thus be great if people can post their kernel logs, at least the line telling the chip version and eco, so we know what's actually out there in the wild -- all I could find is [ 0.000000] SoC Type: Ralink MT7620A ver:2 eco:6 and [ 0.000000] SoC Type: Ralink MT7620N ver:2 eco:6 which would make things easier, as then we really just need to know whether it's MT7620N or MT7620A and not care about FPGA or prototypes with ver <= 1 and eco <= 2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: clean up XATTR config symbolsPaul Spooren2020-10-0923-29/+4
| | | | | | | | | | | | | Extended attributes are required for overlayfs and have hence been long ago enabled for jffs2, but should be enabled unconditionally for all other filesystems which may potentially serve as overlayfs' upper directory. Previously it was inconsistently added in multiple targets. Add symbols to generic kernel config and remove all *_XATTR symbols from target configs. Signed-off-by: Paul Spooren <mail@aparcar.org> [keep things as they are for squashfs, improve commit message] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: sort config-5.4 via kconfig.plPaul Spooren2020-10-091-26/+25
| | | | | | | The options were out of order which makes reviewing of changes harder. Sort it before applying an actual change. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build, imagebuilder: Do not require compilersSven Roederer2020-10-091-0/+4
| | | | | | | | | | | | | The buildroot and SDK both require the compilers (gcc, g++) to be installed on the host system, however the ImageBuilder uses precompiled binaries. This patch changes the prerequirements checks to skip the checking for the compilers if running as ImageBuilder. A similar change has been made for libncurses-dev in 4a1a58a3e2d2. Signed-off-by: Sven Roederer <devel-sven@geroedel.de> Acked-by: Paul Spooren <mail@aparcar.org>
* lantiq: remove model name from LED labelsAdrian Schmutzler2020-10-08105-985/+906
| | | | | | | | | | | | | | | | Like in the previous patches for other targets, this will remove the "devicename" from LED labels in lantiq. The devicename is removed in DTS files and 01_leds, consolidation of definitions into DTSI files is done where (easily) possible, and migration scripts are updated. The DTS/DTSI consolidation is only performed for files-5.4. For lantiq,easy98020 some LED definitions have the form "devicename:function" without the color, so we need to implement explicit migration for that one. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: use upstream DTS files for IPQ4019/AP-DK04.1Adrian Schmutzler2020-10-073-202/+167
| | | | | | | | | | | | | | Upstream provides DTS(I) files for IPQ4019/AP-DK04.1, but we overwrite them with local versions so far. Remove the local files and use patches to be closer to upstream. We already do the same for IPQ40xx/AP-DK01.1-C1. Technically, this changes the compatible from "qcom,ipq4019" to "qcom,ipq4019-dk04.1-c1", but it has never been implemented correctly beforehand anyway. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: improve support for Edgecore ECW5211Sungbo Eo2020-10-075-39/+34
| | | | | | | | | | | | | | | | | | | This adds several stylistic and functional improvements of the recently added Edgecore ECW5211, especially: * Drop the local BDFs as those are already in the upstream under different names * Add SPDX tag to DTS * Add label MAC address * Move LED trigger to DTS * Remove unnecessary status="okay" * Disable unused SS USB phy as the USB port only supports USB 2.0 * Make uboot-env partition writable * Remove qcom,poll_required_dynamic property as the driver does not use it * Tidy up the device recipe Fixes: 4488b260a02e ("ipq40xx: add Edgecore ECW5211 support") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Acked-by: Robert Marko <robert.marko@sartura.hr>
* ipq806x: remove model name from LED labelsAdrian Schmutzler2020-10-0726-211/+217
| | | | | | | | | | Like in the previous patches for ath79 and ramips, this will remove the "devicename" from LED labels in ipq806x. The devicename is removed in DTS files and 01_leds, and a migration script is added. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq40xx: remove model name from LED labelsAdrian Schmutzler2020-10-0740-218/+233
| | | | | | | | | | | Like in the previous patches for ath79 and ramips, this will remove the "devicename" from LED labels in ipq40xx. The devicename is removed in DTS files and 01_leds, and a migration script is added. While at it, also harmonize capitalization of wlan2G/wlan5G vs. wlan2g/wlan5g. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: rename ubnt,acb-isp to ubnt,aircube-ispRoman Kuzmitskii2020-10-064-7/+8
| | | | | | | | | | | | Use the full model name for this device to make it easier to recognize for the users and in order to make it consistent with the other devices. While at it, fix sorting in 03_gpio_switches. Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com> [commit message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ppp: update to version 2.4.8.git-2020-10-03Hans Dedecker2020-10-051-3/+3
| | | | | | | 2937722 Enable IPv6 by default (#171) 6d39c65 pppd: Fix blank password usage Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: update to latest Git HEADJo-Philipp Wich2020-10-041-3/+3
| | | | | | | | | | | | | 14a3cb4 ubus: fix legacy empty reply format 0f38b03 client: fix spurious keepalive connection timeouts 88ba2fa client: really close connection on timeout c186212 ubus: support GET method with CORS requests Fixes: FS#3369 Fixes: https://github.com/openwrt/luci/issues/4467 Fixes: https://github.com/openwrt/luci/issues/4470 Fixes: https://github.com/openwrt/luci/issues/4479 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* toolchain/binutils: update to 2.35.1DENG Qingfang2020-10-046-7/+7
| | | | | | Update binutils 2.35 to 2.35.1 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath79: rename TP-Link TL-WPA8630P v2 (EU) to v2.0 (EU)Adrian Schmutzler2020-10-046-13/+14
| | | | | | | Since we have a v2.1 (EU) with different partitioning now, rename the v2.0 to make the difference visible to the user more directly. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link TL-WPA8630P (EU) v2.1Joe Mullally2020-10-0410-10/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the TP-Link TL-WPA8630P (EU) in its v2.1 version. The only unique aspect for the firmware compared to v2 layout is the partition layout. Note that while the EU version has different partitioning for v2.0 and v2.1, the v2.1 (AU) is supported by the v2-int image. If you plan to use this device, make sure you have a look at the Wiki page to check whether the device is supported and which image needs to be taken. Specifications -------------- - QCA9563 750MHz, 2.4GHz WiFi - QCA9888 5GHz WiFi - 8MiB SPI Flash - 128MiB RAM - 3 GBit Ports (QCA8337) - PLC (QCA7550) Installation ------------ Installation is possible from the OEM web interface. Make sure to install the latest OEM firmware first, so that the PLC firmware is at the latest version. However, please also check the Wiki page for hints according to altered partitioning between OEM firmware revisions. Notes ----- The OEM firmware has 0x620000 to 0x680000 unassigned, so we leave this empty as well. It is complicated enough already ... Signed-off-by: Joe Mullally <jwmullally@gmail.com> [improve partitions, use v2 DTSI, add entry in 02_network, rewrite and extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* omap: update uboot to v2020.04Andre Heider2020-10-041-2/+2
| | | | | | | | | | Fixes the build error: /usr/bin/ld: scripts/dtc/dtc-parser.tab.o:(.bss+0x10): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here collect2: error: ld returned 1 exit status Successfully tested on boneblack. Signed-off-by: Andre Heider <a.heider@gmail.com>
* ramips: fix logic level for DIR-645 buttonsDavid Bauer2020-10-031-2/+2
| | | | | | | | | | | The D-Link DIR-645 currently uses an incorrect logic level for its buttons. Correct them in order to prevent unintentional activation of failsafe mode. Reported-by: Perry Melange <isprotejesvalkata@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-rockchip: add Rock Pi 4 supportMarty Jones2020-10-031-0/+11
| | | | | | Add support for the Raxda Rock Pi 4. Signed-off-by: Marty Jones <mj8263788@gmail.com>
* rockchip: add support for Radxa Rock Pi 4Marty Jones2020-10-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds basic support for Radxa Rock Pi 4 Specification: - RAM: 1 GB/ 2 GB/4 GB LPDDR4 - SoC: Rockchip RK3399 - CPU: 64bit hexa core processor Dual Cortex-A72, freqency 1.8Ghz with quad Cortex-A53, frequency 1.4Ghz - USB: USB 3.0 OTG x1 hardware switch for host/device switch, upper one USB 3.0 HOST x1 dedicated USB3.0 channel, lower one USB 2.0 HOST x2 - Ethernet: 1x GbE - Storage: eMMC module uSD card M.2 SSD - Wireless: 802.11 ac wifi Bluetooth 5.0 currently not supported firmware Installation ====================== gzip -d xxx.img.gz, then dd the .img to SD/eMMC ====================== Device Tested: ROCK PI 4 Model B v1.3 Signed-off-by: Marty Jones <mj8263788@gmail.com>
* linux-firmware: update to 20200918David Bauer2020-10-031-3/+3
| | | | | | | | | | | | | | | | | | | 00a84c5 linux-firmware: Update AMD SEV firmware 71338c2 Merge branch 'for-master' of https://github.com/CosmicPenguin/linux-firmware into main 07367b9 linux-firmware: Update firmware file for Intel Bluetooth AX200 1d1586a linux-firmware: Update firmware file for Intel Bluetooth AX201 28b333d linux-firmware: Update firmware file for Intel Bluetooth 9560 db30380 linux-firmware: Update firmware file for Intel Bluetooth 9260 eb3aa1f Mellanox: Add new mlxsw_spectrum firmware xx.2008.1310 ec88f05 mediatek: update MT7915 firmware to 20200819 a9993f8 brcm: Fix a stale symlink for RPi3 model b+ f48fec4 qcom: Add updated a5xx and a6xx microcode d5f9eea wl18xx: update firmware file 8.9.0.0.83 7a237c6 linux-firmware: mt7615: update firmware to 20200814 version 74bd44f amdgpu: add navi12 firmware from 20.30 b9f69cd amdgpu: update navi10 firmware for 20.30 Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: enable Realtek PHY supportDavid Bauer2020-10-031-0/+1
| | | | | | | The NanoPi R2S features a Realtek Gigabit Ethernet PHY. Enable the Realtek specific PHY driver to correctly configure internal delays. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: fix NanoPi R2S PHY IDDavid Bauer2020-10-031-1/+1
| | | | | | | Fix the PHY ID for the NanoPi R2S PHY compatible to match the used PHY. The ID was wrong as I've accidentally picked the wrong upstream patch. Signed-off-by: David Bauer <mail@david-bauer.net>
* Revert "uboot-rockchip: update NanoPi R2S patches"David Bauer2020-10-034-191/+124
| | | | | | | | | This reverts commit bda6f6572be630bcf9a1c8a429e40d8a53033af5. This commit breaks the onboard ethernet on some units. Revert it for now. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.4 to 5.4.69John Audia2020-10-0271-203/+177
| | | | | | | | | | | | | | | | | | | | | | Seemingly unneeded based on new upstream code so manually deleted: layerscape: 820-usb-0007-usb-dwc3-gadget-increase-timeout-value-for-send-ep-c.patch Manually merged: generic-hack: 251-sound_kconfig.patch All other modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [add lantiq test report, minor commit message clarification] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: add layerscape's SATA driver packagePawel Dembicki2020-10-023-2/+25
| | | | | | | | | | | This patch intruduce SATA support for layerscape devices. Target specific package with ahci_qoriq driver was added to local modules.mk. Kmod package was added to default packages for devices with SATA interface. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add missing kmods for i2c peripherialsPawel Dembicki2020-10-021-6/+18
| | | | | | | | This patch adds kmod-hwmon-ina2xx kmod-hwmon-lm90 for boards, which have it installed. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 00:46:51 +0000