aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* unetd: update to the latest versionFelix Fietkau2022-09-163-5/+23
| | | | | | | | | | | | | | | | | | | | | | | 21360a1b1ce6 cli: fix typo abfebece0af1 wg-linux: ship a copy of linux/wireguard.h 1cbb1a543cb3 pex: reduce unnecessary ping traffic 0c2f39e52d5d pex: remove pex event debug spam dcf1362c2104 pex: add support for sending/receiving global PEX messages via unix socket df5f70b8858c ubus: notify on network updates e58a56697131 add DHT discovery service be175767bc67 pex: keep active pex hosts after the specified timeout 543e4a3d2ed7 pex: move rx header check to callback function 395659b9c415 pex: move raw ip send code to sendto_rawudp() in utils.c dda15ea8b3b2 pex: add utility function to get the sockets based on type / address family e88f2cd4d3f0 utils: add support for passings address family to network_get_endpoint() 639cdcdf6eda pex: add support for figuring out the external data port via STUN servers 9144339ebe1f pex: improve handling of a longer list of PEX hosts 38212218ecdd unet-cli: add DHT support 0d37ca75434d pex: automatically create host entries from incoming endpoint port notifications 035fcc56ef60 host: keep multiple endpoint candidates, one for each type a089e8ae7504 pex: avoid sending a query to a host more than once every 15 seconds Signed-off-by: Felix Fietkau <nbd@nbd.name>
* unetd: select unetd from unet-cli instead of depending on itFelix Fietkau2022-09-161-1/+1
| | | | | | Some people may explicitly want to select unet-cli for admin purposes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: add libwolfssl-cpu-crypto packageEneas U de Queiroz2022-09-163-46/+98
| | | | | | | | | | | | | | libwolfssl-cpu-crypto is a variant of libwolfssl with support for cryptographic CPU instructions on x86_64 and aarch64. On aarch64, wolfSSL does not perform run-time detection, so the library will crash when the AES functions are called. A preinst script attempts to check for support by querying /proc/cpuinfo, if installed in a running system. When building an image, the script will check the DISTRIB_TARGET value in /etc/openwrt_release, and will abort installation if target is bcm27xx. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* rpcd: update to latest Git HEADJo-Philipp Wich2022-09-161-3/+3
| | | | | | | e80d0b2 ucode: pass-through `ubus_rpc_session` argument 0d02243 ucode: initialize module search path early Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ucode: update to latest Git HEADJo-Philipp Wich2022-09-161-3/+3
| | | | | | | | | | | cc4eb79 ubus: support obtaining numeric error code 01c412c ubus: add toplevel constants for ubus status codes 8e240fa ubus: allow object method call handlers to return a numeric status code 5cdddd3 lib: add limit support to split() and replace() 0ba9c3e fs: add optional third permission argument to fs.open() c1f7b3b lib: remove fixed capture group limit in match() and regex replace() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: mhi: backport upstream patchKoen Vandeputte2022-09-161-0/+37
| | | | | | | | | | | | | This patch will print the name of the modem in the bootlog during probing. This allows to verify that the exact model was loaded and not some generic type. The only other way to do this is by enabling dynamic debugging which is disabled by default in OpenWRT Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* mac80211: merge upstream fixesKoen Vandeputte2022-09-163-0/+179
| | | | | | fetched from upstream kernel v5.15.67 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: merge pending fixes for tx queueing issuesFelix Fietkau2022-09-152-0/+87
| | | | | | Fixes a potential deadlock and a tx queue hang on STA assoc Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2022-09-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 94eb0bc1374d wifi: mt76: testmode: use random payload for tx packets f8ece810002b wifi: mt76: add rx_check callback for usb devices 67fbdb7bed90 wifi: mt76: mt7921e: fix race issue between reset and suspend/resume a9b09dd2715f wifi: mt76: mt7921s: fix race issue between reset and suspend/resume ee3eb0d6d52e wifi: mt76: mt7921u: fix race issue between reset and suspend/resume 9706ccef5447 wifi: mt76: mt7921u: remove unnecessary MT76_STATE_SUSPEND 74a29eb4f714 wifi: mt76: mt7921: move mt7921_rx_check and mt7921_queue_rx_skb in mac.c f49e06c4cfce wifi: mt76: sdio: fix the deadlock caused by sdio->stat_work 322656141fa4 wifi: mt76: sdio: poll sta stat when device transmits data dee0a3cbfb03 wifi: mt76: mt7915: fix an uninitialized variable bug 9dd7be2c5164 wifi: mt76: mt7921: fix use after free in mt7921_acpi_read() 0ad02c9a4512 wifi: mt76: sdio: add rx_check callback for sdio devices fe85e5ccbaca wifi: mt76: sdio: fix transmitting packet hangs 206c7ebd7464 wifi: mt76: mt7615: add mt7615_mutex_acquire/release in mt7615_sta_set_decap_offload bf79f5d73e4f wifi: mt76: mt7915: fix possible unaligned access in mt7915_mac_add_twt_setup c4132ab0bea2 wifi: mt76: connac: fix possible unaligned access in mt76_connac_mcu_add_nested_tlv 52eec74986cf wifi: mt76: mt7663s: add rx_check callback 019ef069e754 wifi: mt76: mt76_usb.mt76u_mcu.burst is always false remove related code 0a392ca03db8 wifi: mt76: mt7921: add mt7921_mutex_acquire at mt7921_[start, stop]_ap fbb3554b6236 wifi: mt76: mt7921: add mt7921_mutex_acquire at mt7921_sta_set_decap_offload b55a4eb2ee21 wifi: mt76: mt7921: fix the firmware version report 2d72c9a74011 wifi: mt76: move move mt76_sta_stats to mt76_wcid 873365b06c5c wifi: mt76: add PPDU based TxS support for WED device 0c64a80a61c2 wifi: mt76: connac: fix in comment d11f971a452e wifi: mt76: mt7921: get rid of the false positive reset 2ac22300c7ac wifi: mt76: mt7915: fix mcs value in ht mode 5e45533e4ba2 wifi: mt76: fix uninitialized pointer in mt7921_mac_fill_rx e06376af21dd wifi: mt76: mt7915: do not check state before configuring implicit beamform 0c0bda4aea05 wifi: mt76: mt7921: reset msta->airtime_ac while clearing up hw value cddc4b43ea93 wifi: mt76: mt7921e: fix rmmod crash in driver reload test ebbd68842ee0 wifi: mt76: mt7921: introduce Country Location Control support 763a1d90133b wifi: mt76: mt7921e: fix random fw download fail Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: build USB XHCI support as moduleDaniel Golle2022-09-144-13/+1
| | | | | | | | Instead of always including the XHCI driver in the kernel on all MediaTek boards, selectively include the kernel module only on boards which actually make use of USB functionality. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: rtl838x: Fix ethernet polling timeout on probeOlliver Schinagl2022-09-141-1/+2
| | | | | | | | | | Due to an oversight we accidentally inverted the timeout check. This patch corrects this. Fixes: 9cec4a0ea45b ("realtek: Use built-in functionality for timeout loop") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> [ wrap poll_timeout line to 80 char ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* armvirt: make 5.15 kernel defaultPetr Štetiar2022-09-141-2/+1
| | | | | | In order to begin testing of upcoming kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* malta: make 5.15 kernel defaultPetr Štetiar2022-09-141-2/+1
| | | | | | In order to begin testing of upcoming kernel. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mpc85xx: Add 5.15 kernel as testing and fix configsWojciech Dubowik2022-09-144-0/+6
| | | | | | | | | Build system: x86_64 Build-tested: generic Run-tested: generic/TL-WDR4900 v1 board from TP-Link Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@westermo.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [un-dmarc]
* mpc85xx: Copy over kernel 5.10 patches and config to 5.15Wojciech Dubowik2022-09-1412-0/+831
| | | | | | | Split patches for better change visibility. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@westermo.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> [un-dmarc, commit description]
* tegra: add kernel 5.15 supportTomasz Maciej Nowak2022-09-142-20/+43
| | | | | | | | - refresh config - disable suspend as it's pointless in the sope of OpenWrt - enable CPU frequency scaling Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* tegra: copy patches and config for kernel 5.15Tomasz Maciej Nowak2022-09-143-0/+607
| | | | | | Simple copy to better illustrate the forthcoming changes. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* bcm53xx: update NVMEM driver for NVRAMRafał Miłecki2022-09-148-10/+460
| | | | | | Include support for NVMEM cells. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* realtek: Use built-in functionality for timeout loopOlliver Schinagl2022-09-141-12/+7
| | | | | | | | | | In commit 81e3017609be ("realtek: clean up rtl838x MDIO busy wait loop") a hand-crafted loop was created, that nearly exactly replicate the iopoll's `read_poll_timeout` functionality. Use that instead. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* scripts: add clean of build dir to dl_cleanup scriptAnsuel Smith2022-09-141-3/+35
| | | | | | | | | | Improve dl_cleanup by adding an option to also clean the build directory related to the downloaded package. The script will check every directory in build_dir/ and check if any old package is present there. If outdated package are found, the old one are cleared leaving only the last one. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: assume dl/ the default dir for dl_cleanup scriptAnsuel Smith2022-09-141-8/+12
| | | | | | | Assume dl/ the default dl dir and make it configurable if someone have that in a different place. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* scripts: add additional regex for dl_cleanupAnsuel Smith2022-09-141-0/+2
| | | | | | | Add additional regex for dl_cleanup script to handle case with xxx-v1.2a and xxx-v1.2.3a Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* libcap: use more compatible shebangIlya Katsnelson2022-09-141-0/+8
| | | | | | | Patch a script to use a shebang that works on systems that don't have a /bin/bash, e.g. NixOS or GuixSD. Signed-off-by: Ilya Katsnelson <me@0upti.me>
* tools/bc: use more compatible shebangIlya Katsnelson2022-09-141-1/+1
| | | | | | | Update the existing patch to use a shebang that works on systems that don't have a /bin/bash, e.g. NixOS or GuixSD. Signed-off-by: Ilya Katsnelson <me@0upti.me>
* kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIEKabuli Chana2022-09-131-2/+33
| | | | | | | | add Flow Queuing with Proportional Integral controller Enhanced (FQ-PIE) as an optional kmod in network support and extract sched-pie from kmod-sched to allow dependency on just kmod-sched-pie (PIE). Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* mt7621: fix Linksys E7350 GPIORosen Penev2022-09-131-0/+7
| | | | | | | | | When converting this device to use both GMACs, I mistakenly removed state_default, which prevented GPIO LEDs and keys from being used. Fixes: f4eef5f2a184 ("ramips: add support for Linksys E7350") Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mt7621: fix Belkin RT1800 GPIORosen Penev2022-09-131-0/+19
| | | | | | | | | | | | | When converting this device to use both GMACs, I mistakenly removed state_default, which prevented GPIO LEDs and keys from being used. Add back and and extra LEDs that were missing. Tested all LEDs by turning them on. Fixes: 26a6a6a60ba7 ("ramips: add support for Belkin RT1800") Signed-off-by: Rosen Penev <rosenp@gmail.com>
* CI: include automatic Pull Request LabelerPiotr Dymacz2022-09-132-0/+115
| | | | | | | | | | | | | | | | | | | This adds GitHub CI action which makes use of 'Labeler', allowing automatic labeling of new PRs, based on the modified files paths. Below labels are supported and more can be added later: - 'target/*' - 'target/imagebuilder' - 'kernel' - 'core packages' - 'build/scripts/tools' - 'toolchain' - 'GitHub/CI' For more information: https://github.com/marketplace/actions/labeler Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* realtek: add support for TP-Link SG2210PAlexandru Gagniuc2022-09-137-2/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the TP-Link SG2210P switch. This is an RTL8380 based switch with eight RJ-45 ports with 802.3af PoE, and two SFP ports. This device shares the same board with the SG2008P and SG2008. To model this, declare all the capabilities in the sg2xxx dtsi, and disable unpopulated on the lower end models. Specifications: --------------- - SoC: Realtek RTL8380M - Flash: 32 MiB SPI flash (Vendor varies) - RAM: 256 MiB (Vendor varies) - Ethernet: 8x 10/100/1000 Mbps with PoE (all ports) 2x SFP ports - Buttons: 1x "Reset" button on front panel - Power: 53.5V DC barrel jack - UART: 1x serial header, unpopulated - PoE: 2x TI TPS23861 I2C PoE controller Works: ------ - (8) RJ-45 ethernet ports - (2) SFP ports (with caveats) - Switch functions - System LED Not yet enabled: ---------------- - Power-over-Ethernet (driver works, but doesn't enable "auto" mode) - PoE LEDs Enabling SFP ports: ------------------- The SFP port control lines are hardwired, except for tx-disable. These lines are controller by the RTL8231 in shift register mode. There is no driver support for this yet. However, to enable the lasers on SFP1 and SFP2 respectively: echo 0x0510ff00 > /sys/kernel/debug/rtl838x/led/led_p_en_ctrl echo 0x140 > /sys/kernel/debug/rtl838x/led/led_sw_p_ctrl.26 echo 0x140 > /sys/kernel/debug/rtl838x/led/led_sw_p_ctrl.24 Install via serial console/tftp: -------------------------------- The footprints R27 (0201) and R28 (0402) are not populated. To enable serial console, 50 ohm resistors should be soldered -- any value from 0 ohm to 50 ohm will work. R27 can be replaced by a solder bridge. The u-boot firmware drops to a TP-Link specific "BOOTUTIL" shell at 38400 baud. There is no known way to exit out of this shell, and no way to do anything useful. Ideally, one would trick the bootloader into flashing the sysupgrade image first. However, if the image exceeds 6MiB in size, it will not work. The sysupgrade image can also be flashed. To install OpenWrt: Prepare a tftp server with: 1. server address: 192.168.0.146 2. the image as: "uImage.img" Power on device, and stop boot by pressing any key. Once the shell is active: 1. Ground out the CLK (pin 16) of the ROM (U7) 2. Select option "3. Start" 3. Bootloader notes that "The kernel has been damaged!" 4. Release CLK as sson as bootloader thinks image is corrupted. 5. Bootloader enters automatic recovery -- details printed on console 6. Watch as the bootloader flashes and boots OpenWrt. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [OpenWrt capitalisation in commit message] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: rtl8380-tl-sg2xxx: use a single "firmware" partitionAlexandru Gagniuc2022-09-131-25/+4
| | | | | | | | | The "firmware" partition was assembled from two contiguous partitions. This complexity is unnecessary. Instead of using mtd-concat over "sys" and "usrimg1", simply declare the "firmware" partition to cover the flash space instead. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* realtek: tl-sg2xxx: read MAC address from nvmem-cellsAlexandru Gagniuc2022-09-133-1/+23
| | | | | | | | | | | | | The TP-Link RTL83xx based switches have their MAC address programmed in the "para" partition. While in theory, the format of this partition is dynamic, in practice, the MAC address appears to be located at a consistent address. Thus, use nvmem-cells to read this MAC address. The main MAC is required for deriving the MAC address of the switch ports. Instead of reading it via mtd_get_mac_binary(), alias the ethernet0 node as the label-mac-device, and use get_mac_label(). Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* realtek: rtl838x: label switch port dts nodesAlexandru Gagniuc2022-09-131-2/+2
| | | | | | | | Although PHY nodes are labeled, the port nodes were not. Labeling of ports is useful for 'status = "disabled"' ports, which is supported since commit 9a7f17e11f5d ("realtek: ignore disabled switch ports") Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
* realtek: split TP-Link SG2000 series devicetreeAlexandru Gagniuc2022-09-132-177/+182
| | | | | | | | | | | | The TP-Link TL-SG2008, TL-SG2008P, and TL-SG2210P use the same board. The main difference is that some footprints are not populated in the lower-end models. To model this with minimal duplication, move the devicetree to a common dtsi, leaving out just the board name. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [remove port relabelling from commit message, already merged with commit 18a2b29aa1c9 ("realtek: tl-sg2008p: fix labeling of lan ports")] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* uboot-mediatek: fix extraneous right parensPetr Štetiar2022-09-131-1/+1
| | | | | | | | Fixes following warning: Makefile:310: extraneous text after 'ifeq' directive Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/download.pl: fix downloads with wgetPetr Štetiar2022-09-131-2/+8
| | | | | | | | | | | | | | | | | | | | Several users of wget for downloads (curl is not available in the system) have reported broken download functionality: wget --tries=5 --timeout=20 --output-document=- https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.142.tar.xz http://: Invalid host name. Thats all happening due to '' was passed as an argument, which got later expanded to http://. In the context of a list constructor '' is not nothing, it is an empty string element. So fix it by using () as it will yield "nothing" and thus not introduce an empty string element. Fixes: #10692 Fixes: 90c6e3aedf16 ("scripts: always check certificates") Signed-off-by: Jo-Philipp Wich <jo@mein.io> [shellwords() -> ()] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* scripts/download.pl: silence can't exec curl warningPetr Štetiar2022-09-131-1/+1
| | | | | | | | | | | When running build in verbose mode `make V=s` we can see a lot of following warnings when curl is not available in the system: Can't exec "curl": No such file or directory at scripts/download.pl line 77. So lets fix it by redirecting of the stderr to null hole. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* toolchain: Include ./include/fortify for external musl toolchainHauke Mehrtens2022-09-121-0/+1
| | | | | | | | | | | | | | When building with an external toolcahin with musl also include ./include/fortify by default. This is also done when we build with the internal toolchain using musl libc. Without this extra include the fortify source feature is not working when using an external musl toolchain. All binaries were compiled without fortify source when an external musl toolchain was used. All binaries release done by the OpenWrt project use the internal toolcahin where fortify source is working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: Select USE_SSTRIP with external musl toolchainHauke Mehrtens2022-09-122-2/+0
| | | | | | | | | When we use the internal toolchain USE_SSTRIP will be selected by default for musl libc and USE_STRIP when glibc is used. Do the same when an external toolchain is used. USE_GLIBC will also be set for external toolchain builds based on the EXTERNAL_TOOLCHAIN_LIBC_USE_GLIBC setting. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: experimental improvements for MT7620 wifiDaniel Golle2022-09-1217-15/+467
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add patch descriptions to rt2x00 patchesDaniel Golle2022-09-126-1/+76
| | | | | | | Prepare patches for sending upstream by adding patch descriptions generated from the original OpenWrt commits adding each patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* unetd: only depend on bpf-headers if BPF toolchain support is availableFelix Fietkau2022-09-121-1/+1
| | | | | | If BPF is unavailable, unetd can be built without it (by disabling VXLAN support). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for ZyXEL Keenetic 4G Rev.B DeviceSergei Burakov2022-09-133-0/+150
| | | | | | | | | | | | | | | | | | | | | | | | Specification: SoC: RT5350 CPU Frequency: 360 MHz Flash Chip: Macronix MX25L6406E (8192 KiB) RAM: Winbond W9825G6JH-6 (32768 KiB) 3x 10/100 Mbps Ethernet (2x LAN, 1x WAN) 1x external antenna UART (J1) header on PCB (57800 8n1) Wireless: SoC-intergated: 2.4GHz 802.11bgn USB: Yes 8x LED, 2x button Flash instruction: Configure PC with static IP 192.168.99.8/24 and start TFTP server. Rename "openwrt-ramips-rt305x-zyxel_keenetic-4g-b-squashfs-sysupgrade.bin" to "rt305x_firmware.bin" and place it in TFTP server directory. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power LED start blinking. Router will download file from TFTP server, write it to flash and reboot. Signed-off-by: Sergei Burakov <senior.anonymous@mail.ru>
* mediatek: unset CONFIG_CMDLINE_OVERRIDE for all targets but mt7629Daniel Golle2022-09-123-0/+3
| | | | | | | | | | The newly introduced config symbol CONFIG_CMDLINE_OVERRIDE is only set for mt7629 for now which breaks automated build on all other mediatek subtargets. Make sure the symbol is configured as 'is not set' for all remaining subtargets. Fixes: c27279dc26 ("mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX.") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for ipTIME A6004MX Add basic support for ipTIME A6004MX.Yoonji Park2022-09-129-0/+416
| | | | | | | | | | | | | | | | | | | | | | | | | Hardware: SoC: MediaTek MT7629 Cortex-A7 (ARMv7 1.25GHz, Dual-Core) RAM: DDR3 128MB Flash: Macronix MX35LF1GE4AB (SPI-NAND 128MB) WiFi: MediaTek MT7761N (2.4GHz) / MediaTek MT7762N (5GHz) - no driver Ethernet: SoC (WAN) / MediaTek MT7531 (LAN x4) UART: [GND, RX, TX, 3.3V] (115200) Installation: - Flash recovery image with TFTP recovery Revert to stock firmware: - Flash stock firmware with TFTP recovery TFTP Recovery method: 1. Unplug the router 2. Hold the reset button and plug in 3. Release when the power LED stops flashing and go off 4. Set your computer IP address manually to 192.168.0.x / 255.255.255.0 5. Flash image with TFTP client to 192.168.0.1 Signed-off-by: Yoonji Park <koreapyj@dcmys.kr>
* kernel: add support for mtdsplit-fit offsetYoonji Park2022-09-121-4/+7
| | | | | | | | | | Support devices that has vendor custom header before FIT image. Some devices has vendor custom header before FIT image. In this case mtd- split can not find FIT image and it results in rootfs mount failure. Please refer iptime,a6004mx device for further examples. Signed-off-by: Yoonji Park <koreapyj@dcmys.kr>
* firmware-utils: update to git HEADDaniel Golle2022-09-121-3/+3
| | | | | | 0c92b20 iptime-crc32: add support for A6004MX Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* xdp-tools: don't rely on host bpf headersDaniel Golle2022-09-121-1/+5
| | | | | | | | | | xdp-tools build currently breaks on build hosts which do not have libbpf headers installed because the build system wrongly tries to use the host's include path. Properly pass path to libbpf headers to xdp-tools build system to fix build e.g. on the buildbots. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: disable unsupported background radar detectionShiji Yang2022-09-123-2/+7
| | | | | | | | | | | MT7915 requires an additional antenna for background radar scanning. Disable this feature in the following devices that do not have a separate DFS antenna: linksys,e8450 ruijie,rg-ew3200gx-pro xiaomi,redmi-router-ax6s Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: disable unsupported background radar detectionShiji Yang2022-09-127-0/+7
| | | | | | | | | | | | | | | | | | | Background radar detection is not supported on devices that using MT7905, so disable this feature in the following devices: asus,rt-ax53u jcg,q20 tplink,eap615-wall-v1 xiaomi,mi-router-cr6606 xiaomi,mi-router-cr6608 xiaomi,mi-router-cr6609 yuncore,ax820 Devices with MT7915 lacking a DFS antenna also do not support background DFS: totolink,x5000r cudy,x6 Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: use lzma-loader on Sitecom WLR-6000Jasper Scholte2022-09-111-0/+1
| | | | | | | Fixes the boot loader LZMA decompression issue: LZMA ERROR 1 - must RESET board to recover Signed-off-by: Jasper Scholte <NightNL@outlook.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-31 20:16:23 +0000