aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uboot-mvebu: backport two patches for Marvell A38xJosef Schlehofer2022-02-032-0/+214
| | | | | | | | | | | This solves issue with DDR training on Turris Omnia. Log: ******** DRAM initialization Failed (res 0x1) ******** DDR3 Training Sequence - FAILED ERROR ### Please RESET the board ### Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: Add U-boot for Turris OmniaJosef Schlehofer2022-02-031-0/+9
| | | | | | * Add U-boot support for Turris Omnia Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: update to version 2022.01Josef Schlehofer2022-02-031-2/+2
| | | | | Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Tested-by: Andre Heider <a.heider@gmail.com> # ESPRESSObin
* mt76: update to the latest versionFelix Fietkau2022-02-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 833b9d7fcf7f mt76: allow drivers to drop rx packets early f703084f31cb mt76: mt7915: process txfree and txstatus without allocating skbs 047b9a9e78b3 mt76: mt7615: in debugfs queue stats, skip wmm index 3 on mt7663 fea36e02075c mt76: only kick tx queue if frames were queued 8381e54ebfb5 linux-firmware: update firmware for MT7921 WiFi device d57dadb8c861 Revert "mt76: only kick tx queue if frames were queued" 3a21d6e2153b mt76: mt7663: disable 4addr capability f1d66cf7a6c5 mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2 c9a4146404d4 sync with upstream 4ed8c910b94e mt76: mt7921: fix possible resume failure bf105aa6cd2f mt76: mt7921: fix network buffer leak by txs missing e2b454b6fb30 mt76: connac: introduce MCU_EXT macros 5a87f5497c9b mt76: connac: align MCU_EXT definitions with 7915 driver 720ddc32507d mt76: connac: remove MCU_FW_PREFIX bit da5128a59eda mt76: connac: introduce MCU_UNI_CMD macro 116109bee7cb mt76: connac: introduce MCU_CE_CMD macro f96fbdf038d5 mt76: connac: rely on MCU_CMD macro 922f0d408413 mt76: mt7915: rely on mt76_connac definitions b4ae1da1d1e0 mt76: mt7921: reduce log severity levels for informative messages db105a722b87 mt76: mt7921s: make pm->suspended usage consistent e2cc063238c0 mt76: mt7921s: fix suspend error with enlarging mcu timeout value 812b73f2f1e0 mt76: mt7915: introduce mt76_vif in mt7915_vif b041a8a30055 mt76: mt7915: add mu-mimo and ofdma debugfs knobs b851a3e7839d mt76: mt7921: remove dead definitions 266c7a9f2994 mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlv 19cc7d83190c mt76: mt7921: clear pm->suspended in mt7921_mac_reset_work 928c4550e413 mt76: mt7921s: make pm->suspended usage consistent [update] 8d6c68a7d0d1 mt76: mt7921: fix possible resume failure [update] 26fb105e538c mt76: mt7921s: fix cmd timeout in throughput test 9db482264389 mt76: mt7921: fix build regression 3edb87cdf138 mt7915: formatting change to sync with upstream 5cad38ba247d mt76: mt7915: add mt7915_mmio_probe() as a common probing function 15f9f88b362a mt76: mt7915: refine register definition de49cf43ef34 mt76: add MT_RXQ_MAIN_WA for mt7916 6032c35f1306 mt76: mt7915: rework dma.c to adapt mt7916 changes 074d7c5381ed mt76: mt7915: add firmware support for mt7916 27b3253318e7 mt76: mt7915: rework eeprom.c to adapt mt7916 changes 030540246088 mt76: mt7915: enlarge wcid size to 544 400129c69f91 mt76: mt7915: add txfree event v3 cbbb3f65fcd0 mt76: mt7915: update rx rate reporting for mt7916 eb51c4deef0e mt76: mt7915: update mt7915_chan_mib_offs for mt7916 fb4709222028 mt76: mt7915: add mt7916 calibrated data support e758feeaf1d6 mt76: mt7915: add device id for mt7916 115ea27a5cab mt76: connac: fix sta_rec_wtbl tag len b3f922266685 mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_req bac5eda1f5b2 mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_req b44485d5c8ac mt76: mt7915: rely on mt76_connac_mcu_add_tlv routine 9cc58e254d53 mt76: connac: move mt76_connac_mcu_get_cipher in common code 60dcd9f09ff6 mt76: connac: move mt76_connac_chan_bw in common code a8d0b7d0cc60 mt76: mt7915: rely on mt76_connac_get_phy utilities 4441db30c1c1 mt76: connac: move mt76_connac_mcu_add_key in connac module 794b6f18d0fb mt76: mt7915: fix code defect 9d2a01b6cb60 mt76: set wlan_idx_hi on mt7916 2c89977b32c2 mt76: mt7915: fix kernel build warning 6c4874839830 mt76: make mt76_sar_capa static 215fdcc7ca6c mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode bc254718b40e mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv 22fcff5ff21a mt76: sdio: lock sdio when it is needed 4669882aa595 mt76: mt7921s: clear MT76_STATE_MCU_RUNNING immediately after reset 944545855e0f mt76: mt7921s: update mt7921s_wfsys_reset sequence 854c8d076a34 mt76: mt7915: move pci specific code back to pci.c a77da27796f2 mt76: mt7915: fix warning: variable 'base' is used uninitialized 7b5e69961c71 mt76: mt7915: fix warning: variable 'flags' set but not used b5138e7b89f9 mt76: mt7921: fix a possible race enabling/disabling runtime-pm af218fbe2500 linux-firmware: update firmware for MT7921 WiFi device 31c19c467950 mt76: mt7915: remove duplicated defs in mcu.h 9198eca1b16f mt76: connac: move mt76_connac_mcu_bss_omac_tlv in connac module 829d87a93a51 mt76: connac: move mt76_connac_mcu_bss_ext_tlv in connac module 50956cf17901 mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module bda40f4e1d5e mt76: mt7915: rely on mt76_connac_mcu_sta_ba_tlv 4728939c1d48 mt76: mt7915: rely on mt76_connac_mcu_wtbl_ba_tlv e3ae1828068b mt76: mt7915: rely on mt76_connac_mcu_sta_ba d9e9989eca07 mt76: mt7915: rely on mt76_connac_mcu_wtbl_generic_tlv 168713595fff mt76: mt7915: rely on mt76_connac_mcu_sta_basic_tlv 60394d3e3504 mt76: mt7915: rely on mt76_connac_mcu_sta_uapsd 3a79454d078d mt76: mt7915: rely on mt76_connac_mcu_wtbl_smps_tlv 9ae9aa6c1aea mt76: mt7915: rely on mt76_connac_mcu_wtbl_ht_tlv fd8cdfab91e4 mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlv a92024c5a5b5 mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac module 6dc585a3a274 mt76: connac: introduce is_connac_v1 utility routine 0f29d2aa5a72 mt76: connac: move mt76_connac_mcu_set_pm in connac module dcf408ff8a5e mt76: mt7921: get rid of mt7921_mcu_get_eeprom 77b2a8601fc1 mt76: mt7915: rely on mt76_connac_mcu_start_firmware 65f78dee243a mt76: connac: move mt76_connac_mcu_restart in common module 5adf5b14040b mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch 69bf1dabe78f mt76: mt7915: rely on mt76_connac_mcu_init_download 951b1ddd370e mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac module 0826b3992238 mt76: mt7915: rely on mt76_connac_mcu_set_rts_thresh 058de6d36fa9 mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac module aafda86aed2b mt76: mt7921e: make dev->fw_assert usage consistent def12bef91a3 mt76: mt7921: forbid the doze mode when coredump is in progress 009414d27d37 mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error 3c5856eca223 mt76: mt7921: set EDCA parameters with the MCU CE command 01a3d73b452e mt76: mt7615: fix a possible race enabling/disabling runtime-pm 123ed864d1ae mt76: mt7921e: process txfree and txstatus without allocating skbs 018f98abba68 mt76: connac: add support for passing the cipher field in bss_info 288e7443e35c mt76: mt7615: update bss_info with cipher after setting the group key 36e1577cb3d3 mt76: mt7915: update bss_info with cipher after setting the group key d42590d8fcc8 mt76: make cipher in struct mt76_vif u8 instead of enum 11602b8505c6 mt76: mt7615e: process txfree and txstatus without allocating skbs 2ef775c10bd3 linux-firmware: add firmware for MT7916 976ea3879730 mt76: mt7915: add support for passing chip/firmware debug data to user space d11bd7bd83f4 tools: add support for sending firmware debug data via udp dc8e2e8dcd34 mt76: mt7921: do not always disable fw runtime-pm 7063127f852b mt76: mt7921: fix a leftover race in runtime-pm f78f4334b0b2 mt76: mt7615: fix a leftover race in runtime-pm f1f94d19c160 mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb() c2ff2f0d6d19 mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb() 3e7954a0b32e mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl 3c2cc9034376 mt76: mt7921e: fix possible probe failure after reboot f7f6c6dcc6eb mt76: mt7921: fix crash when startup fails. 8656198c925b mt76: sdio: disable interrupt in mt76s_sdio_irq 6204d61ab821 mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx() 68c5aa56f5f2 mt76: mt7921: toggle runtime-pm adding a monitor vif 541e4e8d3c3e mt76: mt7915: set bssinfo/starec command when adding interface 78770f741af9 mt76: mt7915: introduce mt7915_set_radar_background routine 93c03778f92e mt76: mt7915: enable radar trigger on rdd2 4c76a6c3a1f2 mt76: mt7915: introduce rdd_monitor debugfs node 5b94045f927e mt76: mt7915: report radar pattern if detected by rdd2 22094b27ff6a mt76: mt7915: enable radar background detection 4282ca57a143 mt76: connac: move mt76_connac_lmac_mapping in mt76-connac module 0f16c67657a2 mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotap 9a16d33311a7 mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotap 639b55fdc95e mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN) ebbd2717a16e mt76: mt7663s: flush runtime-pm queue after waking up the device 37c3bf2256de mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update 96959bd15eef mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update 4e42e55ce636 mt76: stop the radar detector after leaving dfs channel 8b32439d5a86 mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta b4e6f0d6f15a mt76: mt7921s: fix a possible memory leak in mt7921_load_patch 15398f1e8385 mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs() 607eda6eb032 mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv() 69d20f2e6cb0 mt76: mt7915: fix the nss setting in bitrates c3ffa536249a mt76: sdio: honor the largest Tx buffer the hardware can support e3e3562f8fa0 mt76: mt7921s: run sleep mode by default 553200cf63fd firmware: update mt7662 firmware to version 2.3 20d1fed838b9 mt76x02: improve mac error check/reset reliability 9b2ac62d6f31 mt76: mt76x02: improve tx hang detection fae295af31eb mt76: mt7915: fix/rewrite the dfs state handling logic e0f9479bf893 mt76: mt7615: fix/rewrite the dfs state handling logic 822e1135e7e1 mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector state f8c0ed1e6bdf mt76: do not always copy ethhdr in reverse_frag0_hdr_trans ab9b8078427a mt76: dma: initialize skip_unmap in mt76_dma_rx_fill Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport support for background radar detectionFelix Fietkau2022-02-039-12/+1627
| | | | | | Will be used in an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport MBSSID/EMA support patchesFelix Fietkau2022-02-034-114/+803
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: reorganize patchesFelix Fietkau2022-02-0312-0/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport support for ndo_fill_forward_pathFelix Fietkau2022-02-031-0/+172
| | | | | | Will be used in an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iptables: add ip{,6}tables-legacy{,-restore,-save} symlinksEtienne Champetier2022-02-031-0/+2
| | | | | | | Now that we can have both legacy and nft iptables variants installed at the same time, install the legacy symlinks Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: use ALTERNATIVES for ip(6)tables(-nft)Etienne Champetier2022-02-031-2/+16
| | | | | | | | | As nftables is now the default, ip(6)tables-nft gets higher priority The removed symlinks ("$(CP)" line) will now be installed by the ALTERNATIVES mechanism Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: rework ip(6)tables-nft dependenciesEtienne Champetier2022-02-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | according to iptables-nft man page, "These tools use the libxtables framework extensions and hook to the nf_tables kernel subsystem using the nft_compat module." This means that to work, iptables-nft needs the same modules as iptables legacy except the ip(6)table-{filter,mangle,nat,raw} ip_tables, ip6tables. When those modules are loaded iptables-nft-save output contains "# Warning: iptables-legacy tables present, use iptables-legacy-save to see them" But as long as it's empty it should not be a problem. To have nft properly display the rules created by ip(6)tables-nft we need all iptables targets and matches to be built as extension and not built-in (/usr/lib/iptables/libip(6)t_*.so) When switching a package to iptables-nft, you need to keep the iptables-mod-* dependencies This patch does minimal changes: - remove the direct iptables-nft -> iptables dependency - and more important add nft-compat dependency The rule iptables-nft -A OUTPUT -d 8.8.8.8 -m comment --comment "aaa" -j REJECT becomes table ip filter { chain OUTPUT { type filter hook output priority filter; policy accept; ip daddr 8.8.8.8 # xt_comment counter packets 0 bytes 0 # xt_REJECT } } Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* netfilter: add kmod-nft-compatEtienne Champetier2022-02-022-0/+13
| | | | | | This modules is required by iptables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: fix ip6tables-nft descriptionEtienne Champetier2022-02-021-5/+5
| | | | | | ip6tables-nft packages ip6tables* utils not iptables* Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* iptables: fix ip6tables-extra descriptionEtienne Champetier2022-02-021-1/+1
| | | | | | The define was referencing ip6tables-mod-extra instead of ip6tables-extra Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* uqmi: update to git HEADDaniel Golle2022-02-021-3/+3
| | | | | | f254fc5 uqmi: add support for get operating mode Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm63xx: Remove patch already in Linux stableHauke Mehrtens2022-02-011-34/+0
| | | | | | | Remove the 434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch, it was already applied to Linux 5.10.37 and is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-019-20/+20
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.95Rui Salvaterra2022-02-013-6/+6
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-01133-461/+382
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.93Rui Salvaterra2022-02-011-2/+2
| | | | | | No patches required rebasing. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ipq40xx: add MikroTik cAP ac supportAlar Aun2022-02-0110-1/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD (cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/cap_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port, PoE in and passive PoE out Unsupported: - PoE out Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Alar Aun <alar.aun@gmail.com>
* wolfssl: update to 5.1.1-stableSergey V. Lobanov2022-02-015-144/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bump from 4.8.1-stable to 5.1.1-stable Detailed release notes: https://github.com/wolfSSL/wolfssl/releases Upstreamed patches: 001-Maths-x86-asm-change-asm-snippets-to-get-compiling.patch - https://github.com/wolfSSL/wolfssl/commit/fa8f23284d4689c2a737204b337b58d966dcbd8c 002-Update-macro-guard-on-SHA256-transform-call.patch - https://github.com/wolfSSL/wolfssl/commit/f447e4c1fa4c932c0286fa0331966756e243db81 Refreshed patches: 100-disable-hardening-check.patch 200-ecc-rng.patch CFLAG -DWOLFSSL_ALT_CERT_CHAINS replaced to --enable-altcertchains configure option The size of the ipk changed on aarch64 like this: 491341 libwolfssl4.8.1.31258522_4.8.1-stable-7_aarch64_cortex-a53.ipk 520322 libwolfssl5.1.1.31258522_5.1.1-stable-1_aarch64_cortex-a53.ipk Tested-by: Alozxy <alozxy@users.noreply.github.com> Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
* kernel: add kmod-vrfMarek Behún2022-02-012-0/+27
| | | | | | | | | | | Add option to compile kmod-vrf, support for Virtual Routing and Forwarding (Lite). This module depends on NET_L3_MASTER_DEV, which is a boolean kernel option, so we need to create a configuration option also for this, and make kmod-vrf depend on it. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 5.4 to 5.4.175John Audia2022-02-011-2/+2
| | | | | | All patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* toolchain: glibc: Remove patch for ARC700Hauke Mehrtens2022-02-011-55/+0
| | | | | | The ARC700 target was renoved, this patch is not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdioHauke Mehrtens2022-02-011-1/+1
| | | | | | | kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: Update to version 2022.01Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 13281 uboot-envtools_2021.01-54_mips_24kc.ipk 13308 uboot-envtools_2022.01-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* libcap: Update to version 2.63Hauke Mehrtens2022-02-012-3/+5
| | | | | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 11248 libcap_2.51-1_mips_24kc.ipk 14461 libcap_2.63-1_mips_24kc.ipk 18864 libcap-bin_2.51-1_mips_24kc.ipk 20576 libcap-bin_2.63-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: Update to version 1.46.5Hauke Mehrtens2022-02-013-32/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 8788 badblocks_1.45.6-2_mips_24kc.ipk 8861 badblocks_1.46.5-1_mips_24kc.ipk 3652 chattr_1.45.6-2_mips_24kc.ipk 3657 chattr_1.46.5-1_mips_24kc.ipk 58128 debugfs_1.45.6-2_mips_24kc.ipk 60279 debugfs_1.46.5-1_mips_24kc.ipk 8551 dumpe2fs_1.45.6-2_mips_24kc.ipk 8567 dumpe2fs_1.46.5-1_mips_24kc.ipk 4797 e2freefrag_1.45.6-2_mips_24kc.ipk 4791 e2freefrag_1.46.5-1_mips_24kc.ipk 159790 e2fsprogs_1.45.6-2_mips_24kc.ipk 168212 e2fsprogs_1.46.5-1_mips_24kc.ipk 7083 e4crypt_1.45.6-2_mips_24kc.ipk 7134 e4crypt_1.46.5-1_mips_24kc.ipk 5749 filefrag_1.45.6-2_mips_24kc.ipk 6233 filefrag_1.46.5-1_mips_24kc.ipk 4361 libcomerr0_1.45.6-2_mips_24kc.ipk 4355 libcomerr0_1.46.5-1_mips_24kc.ipk 168040 libext2fs2_1.45.6-2_mips_24kc.ipk 174209 libext2fs2_1.46.5-1_mips_24kc.ipk 8514 libss2_1.45.6-2_mips_24kc.ipk 8613 libss2_1.46.5-1_mips_24kc.ipk 3148 lsattr_1.45.6-2_mips_24kc.ipk 3227 lsattr_1.46.5-1_mips_24kc.ipk 22530 resize2fs_1.45.6-2_mips_24kc.ipk 22909 resize2fs_1.46.5-1_mips_24kc.ipk 33315 tune2fs_1.45.6-2_mips_24kc.ipk 34511 tune2fs_1.46.5-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Update to version 2.37.3Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | This release fixes two security mount(8) and umount(8) issues: CVE-2021-3996 Improper UID check in libmount allows an unprivileged user to unmount FUSE filesystems of users with similar UID. CVE-2021-3995 This issue is related to parsing the /proc/self/mountinfo file allows an unprivileged user to unmount other user's filesystems that are either world-writable themselves or mounted in a world-writable directory. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Do not build raw any more.Hauke Mehrtens2022-02-011-0/+1
| | | | | | | | | | | | | The man page of the raw tool does not build because the disk-utils/raw.8 file is missing. It looks like it should be in the tar.xz file we download, but it is missing. We do not package the raw tool, so this is not a problem. This fixes the following build error: No rule to make target 'disk-utils/raw.8', needed by 'all-am'. Stop. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* strace: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | The sizes of the ipk changed on MIPS 24Kc like this: 289764 strace_5.14-1_mips_24kc.ipk 310899 strace_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ethtool: Update to version 5.16Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 795f420 cmis: Rename CMIS parsing functions 369b43a cmis: Initialize CMIS memory map da16288 cmis: Use memory map during parsing 6acaeb9 cmis: Consolidate code between IOCTL and netlink paths d7d15f7 sff-8636: Rename SFF-8636 parsing functions 4230597 sff-8636: Initialize SFF-8636 memory map b74c040 sff-8636: Use memory map during parsing 799572f sff-8636: Consolidate code between IOCTL and netlink paths 9fdf45c sff-8079: Split SFF-8079 parsing function 2ccda25 netlink: eeprom: Export a function to request an EEPROM page 86792db cmis: Request specific pages for parsing in netlink path 6e2b32a sff-8636: Request specific pages for parsing in netlink path c2170d4 sff-8079: Request specific pages for parsing in netlink path 9538f38 netlink: eeprom: Defer page requests to individual parsers 664586e Merge branch 'review/next/module-mem-map' into master 50fdaec ethtool: Set mask correctly for dumping advertised FEC modes c5e7133 cable-test: Fix premature process termination 73091cd sff-8636: Use an SFF-8636 specific define for maximum number of channels 837c166 sff-common: Move OFFSET_TO_U16_PTR() to common header file 8658852 cmis: Initialize Page 02h in memory map 27b42a9 cmis: Initialize Banked Page 11h in memory map 340d88e cmis: Parse and print diagnostic information eae6a99 cmis: Print Module State and Fault Cause 82012f2 cmis: Print Module-Level Controls d7b1007 sff-8636: Print Power set and Power override bits 429f2fc Merge branch 'review/cmis-diag' into master 32457a9 monitor: do not show duplicate options in help text c01963e Release version 5.16. The sizes of the ipk changed on MIPS 24Kc like this: 34317 ethtool_5.15-1_mips_24kc.ipk 34311 ethtool_5.16-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mbedtls: Update to version 2.16.12Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This fixes the following security problems: * Zeroize several intermediate variables used to calculate the expected value when verifying a MAC or AEAD tag. This hardens the library in case the value leaks through a memory disclosure vulnerability. For example, a memory disclosure vulnerability could have allowed a man-in-the-middle to inject fake ciphertext into a DTLS connection. * Fix a double-free that happened after mbedtls_ssl_set_session() or mbedtls_ssl_get_session() failed with MBEDTLS_ERR_SSL_ALLOC_FAILED (out of memory). After that, calling mbedtls_ssl_session_free() and mbedtls_ssl_free() would cause an internal session buffer to be free()'d twice. CVE-2021-44732 The sizes of the ipk changed on MIPS 24Kc like this: 182454 libmbedtls12_2.16.11-2_mips_24kc.ipk 182742 libmbedtls12_2.16.12-1_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* gdb: Update gdb to version 11.2Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | This is a minor corrective release over GDB 11.1, fixing the following issues: * PR sim/28302 (gdb fails to build with glibc 2.34) * PR build/28318 (std::thread support configure check does not use CXX_DIALECT) * PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) * PR tui/28483 ([gdb/tui] breakpoint creation not displayed) * PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) * PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) * PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) * PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) The sizes of the ipk changed on mips 24Kc like this: 2285775 gdb_11.1-3_mips_24kc.ipk 2287441 gdb_11.2-4_mips_24kc.ipk 191828 gdbserver_11.1-3_mips_24kc.ipk 191811 gdbserver_11.2-4_mips_24kc.ipk Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gdb: Update to version 11.2Hauke Mehrtens2022-02-011-2/+2
| | | | | | | | | | | | | | This is a minor corrective release over GDB 11.1, fixing the following issues: * PR sim/28302 (gdb fails to build with glibc 2.34) * PR build/28318 (std::thread support configure check does not use CXX_DIALECT) * PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed) * PR tui/28483 ([gdb/tui] breakpoint creation not displayed) * PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6) * PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF) * PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section) * PR gdb/28785 (Support SHT_RELR (.relr.dyn) section) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ramips: add support for ipTIME AX2004M"Stijn Tintel2022-02-015-197/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f4a79148f8cb ("ramips: add support for ipTIME AX2004M") seems to leak KERNEL_LOADADDR 0x82000000 to other devices, causing the to no longer boot. The leak is visible in u-boot: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0x840000e4 Data Size: 10750165 Bytes = 10.3 MiB Architecture: MIPS OS: Linux Load Address: 0x82000000 Entry Point: 0x82000000 Normally, it should look like this: Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: MIPS OpenWrt Linux-5.10.92 Type: Kernel Image Compression: lzma compressed Data Start: 0xbfca00e4 Data Size: 2652547 Bytes = 2.5 MiB Architecture: MIPS OS: Linux Load Address: 0x80001000 Entry Point: 0x80001000 Revert the commit to avoid more people soft-bricking their devices. This reverts commit f4a79148f8cbb7dfbcddfb0c1128caec45a01596. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm4908: backport first 5.18 DTS changesRafał Miłecki2022-02-017-40/+424
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath79: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: af8a059bb41d ("ath79: add support for GL.iNet GL-XE300") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ipq806x: convert remaining mtd-mac-address-incrementSungbo Eo2022-02-011-1/+1
| | | | | | | | | | Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to generic implementation") renamed "mtd-mac-address-increment" property to "mac-address-increment". Convert remaining usages that have been added after that. Fixes: f44e933458b1 ("ipq806x: provide WiFI mac-addresses from dts") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ath79: improve support for Dongwon T&I DW02-412HSungbo Eo2022-02-015-75/+60
| | | | | | | | | * Move &nand node to DTSI * Utilize nvmem for fetching caldata * Rename build recipe, clean before build * Simplify KERNEL definition Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* linux-firmware: intel: add firmware for AX210Sungbo Eo2022-01-311-7/+15
| | | | | | | | Add the most recent supported firmware file for Intel Wi-Fi 6E AX210 wireless chip. The API version 67 is not yet supported by the driver. Additional PNVM file is required since API version 62. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ubox: fix broken deferred start of logfile writerDaniel Golle2022-01-311-9/+1
| | | | | | | | | Just use 'start' action which will have the desired effect instead of trying to introduce a 'start_file' action which didn't work that way because procd jshn magic would have to wrap around it. Fixes: 88baf6ce2c ("ubox: only start log to file when filesystem has been mounted") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: simplify partition generationDaniel Golle2022-01-311-6/+1
| | | | | | | | | The two options 'emmc' and 'sdmmc' now became identical lines after introducing CONFIG_TARGET_ROOTFS_PARTSIZE. Remove the now useless if-clauses. Fixes: a40b4d335a ("mediatek: use CONFIG_TARGET_ROOTFS_PARTSIZE") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: seccomp/jail: Fix build error on arm with glibcDaniel Golle2022-01-311-3/+3
| | | | | | | | | | | | | | | | | | From: Peter Lundkvist <peter.lundkvist@gmail.com> This fixes the make_syscall_h.sh script to recognize both __NR_Linux, used by mips, and __NR_SYSCALL_BASE and __ARM_NR_BASE used by arm. Run-tested on arm (ipq806x) and mips (ath79), both with glibc. Compile-tested and checked resulting syscall_names.h file wuth glibc: aarch64, powerpc, x86_64, i486 musl: arm, mips Fixes: FS#4194, FS#4195 Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: u7623-02: enable early console also in legacy imageDaniel Golle2022-01-311-1/+1
| | | | | | | | Append 'earlycon=uart8250,mmio32,0x11004000' to the boot arguments embedded in device-tree in order to enable early console on the UniElec U7623 board when using the vendor/stock bootloader. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm4908: backport bcm_sf2 patch for better LED registers supportRafał Miłecki2022-01-316-4/+422
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: fixup pinctrl patches for kernel 5.4Rafał Miłecki2022-01-312-7/+8
| | | | | Fixes: b0145891676f ("bcm4908: backport BCM4908 pinctrl driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm4908: backport BCM4908 pinctrl driverRafał Miłecki2022-01-316-0/+1492
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to 2.34 HEADHans Dedecker2022-01-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 72123e1b56 NEWS: Add a bug entry for BZ #28755 08beb3a3f4 x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755] b50d5b746c x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755] 1b9cd6a721 NEWS: add bug entry for BZ #28769 and BZ #28770 3438bbca90 Linux: Detect user namespace support in io/tst-getcwd-smallbuff d084965adc realpath: Avoid overwriting preexisting error (CVE-2021-3998) 472e799a5f getcwd: Set errno to ERANGE for size == 1 (CVE-2021-3999) 8c8a71c85f tst-realpath-toolong: Fix hurd build f7a79879c0 realpath: Set errno to ENAMETOOLONG for result larger than PATH_MAX [BZ #28770] 73c362840c stdlib: Fix formatting of tests list in Makefile 269eb9d930 stdlib: Sort tests in Makefile 062ff490c1 support: Add helpers to create paths longer than PATH_MAX 82b1acd9de powerpc: Fix unrecognized instruction errors with recent binutils 1d401d1fcc x86: use default cache size if it cannot be determined [BZ #28784] 6890b8a3ae CVE-2022-23218: Buffer overflow in sunrpc svcunix_create (bug 28768) 1081f1d3dd sunrpc: Test case for clnt_create "unix" buffer overflow (bug 22542) 7b5d433fd0 CVE-2022-23219: Buffer overflow in sunrpc clnt_create for "unix" (bug 22542) 5575daae50 socket: Add the __sockaddr_un_set function 03e6e02e6a Disable debuginfod in printer tests [BZ #28757] 705f1e4606 Update syscall lists for Linux 5.16 2fe2af88ab i386: Remove broken CAN_USE_REGISTER_ASM_EBP (bug 28771) 73558ffe84 Update syscall lists for Linux 5.15 e64235ff42 powerpc: Fix unrecognized instruction errors with recent GCC Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 04:40:57 +0000