aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 4.14 to 4.14.161Hauke Mehrtens2020-01-0415-108/+108
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20Florian Fainelli2020-01-031-1/+1
| | | | | | | | | | CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of the pinctrl driver, this is necessary since upstream commit 5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20 support to A10 driver") which has been included in v4.13 and onwards. Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* mt76: update to the latest versionDavid Bauer2020-01-031-3/+3
| | | | | | 38f4c57 mt76: mt76x0: fix default mac address overwrite Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix inverted reset button for Ravpower WD03Moritz Warning2020-01-031-1/+1
| | | | | | The button events "pressed" and "released" were switched. Tested with v18.06.4. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* ramips: move set-irq-affinity script to mt7621 subtargetDENG Qingfang2020-01-031-0/+0
| | | | | | | Move the set-irq-affinity script to mt7621 because it is the only SMP subtarget. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* lantiq: use shared code for LED migrationAdrian Schmutzler2020-01-031-45/+6
| | | | | | | | | | Shared base-files package contains functions for LED migration that are already used by several targets. Apply those also to lantiq and drop the (redundant) local code. While at it, reorder board names in file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* lantiq: remove includes of non-existent /lib/functions/lantiq.shAdrian Schmutzler2020-01-032-3/+0
| | | | | | | lantiq.sh is still included in files which do not use it anymore. Remove the includes. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samsung: add subtarget condition for deviceAdrian Schmutzler2020-01-031-0/+4
| | | | | | | | | The only device in samsung target is meant to be built with s5pv210 subtarget. Thus, though this won't make a difference for a one-subtarget target, already add the condition to the Makefile to make the assignment obvious. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samsung: use soc_vendor_model scheme for DTS file nameAdrian Schmutzler2020-01-032-5/+6
| | | | | | | | | | | | | This patch changes the samsung target to calculate the DTS file name from vendor and device name and the SOC (i.e. subtarget) following the common scheme: soc_vendor_model.dts This also updates the device definition name to make compatible, image name, menuconfig name and DTS name consistent. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/arm-magic.sh: switch to /bin/shRosen Penev2020-01-021-1/+1
| | | | | | This does not use any special bash stuff. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: replace -a and -o with &&/||Rosen Penev2020-01-021-5/+5
| | | | | | | | The former are not well defined. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/env: use explicit find locationRosen Penev2020-01-021-1/+1
| | | | | | | | Some find binaries do not imply the current directory. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: fix Archer C20i wireless MAC addressDavid Bauer2020-01-021-0/+9
| | | | | | | | | | The TP-Link Archer C20i previously had a generic Ralink MAC address set for both radios, as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for both radios to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix Archer C2 v1 5GHz MAC addressDavid Bauer2020-01-021-0/+2
| | | | | | | | | | | The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set for the 5GHz radio (MT7610), as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for the 5GHz radio to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add system LED indicators for TP-Link C20iDavid Bauer2020-01-021-1/+5
| | | | | | | Use the WPS LED to indicate system status like it is done for the TP-Link Archer C2 v1 and many other boards. Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: convert TP-Link MT7620 boards to tpt triggerDavid Bauer2020-01-027-7/+8
| | | | | | | | | | | | This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts/gen-dependencies.sh: use /bin/shRosen Penev2020-01-011-1/+1
| | | | | | This uses no special bash stuff. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/gen-dependencies.sh: replace backticks with $()Rosen Penev2020-01-011-2/+2
| | | | | | Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libcxx: Add size optimizationsRosen Penev2020-01-013-1/+39
| | | | | | | | | | | | | | Changed standard to 2a. 2a (as well as 17) contain more constexpr functions, which are evaluated at compile time. This saves space. Added --gc-sections. With the CXXABI change, this now makes the package smaller. With these, size went down to 210845 on mipsel_24kc. Also fixed two small compiler warnings. No real change in behavior. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libcxx: Build with the libsupc++ ABIRosen Penev2020-01-011-1/+2
| | | | | | | | | | | | | | | | | | | | | Allows proper exception handling. This includes removing unimplemented warnings. File size increased as a result: Before: 182874 After: 211006 On mipsel_24kc. Note that this requires libsupc++ anyway. It's specified in g++-libcxx. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: mt7620: use throughput trigger on HiWiFi HC5x61DENG Qingfang2019-12-314-8/+6
| | | | | | Throughput trigger support for MT7620 has been added, so switch to it Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ramips: remove HiWiFi HC5661 non-existent 5GHz LEDDENG Qingfang2019-12-311-5/+0
| | | | | | | | HC5661 does not have 5GHz WiFi or LED. Fixes: e6e373d3480e ("ramips: Add DTS files for HiWiFi HC5x61 models") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ubox: update to version 2019-12-31Hans Dedecker2019-12-311-3/+3
| | | | | | 0e34af1 kmodloader: added -a arg to modprobe Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: add support for TP-Link RE200 v1Andreas Böhler2019-12-315-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE200 v1 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7620A+MT7610EN. Specifications -------------- - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - UART header on PCB (57600 8n1) - 8x LED (GPIO-controlled; only 6 supported), 2x button There are 2.4G and 5G LEDs in red and green which are controlled separately. The 5G LED is currently not supported, since the GPIOs couldn't be determined. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial console -------------- Opening the case is quite hard, since it is welded together. Rename the OpenWrt factory image to "test.bin", then plug in the device and quickly press "2" to enter flash mode (no line feed). Follow the prompts until OpenWrt is installed. Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. Additional notes ---------------- MAC address assignment is based on stock-firmware. For me, the device assigns the MAC on the label to Ethernet and the 2.4G WiFi, while the 5G WiFi has a separate MAC with +2. *:88 Ethernet/2.4G label, uboot 0x1fc00, userconfig 0x0158 *:89 unused userconfig 0x0160 *:8A 5G not present in flash This seems to be the first ramips device with a TP-Link v1 header. The original firmware has the string "EU" embedded, there might be some region- checking going on during the firmware upgrade process. The original firmware also contains U-Boot and thus overwrites the boot loader during upgrade. In order to flash back to stock, the first header and U-Boot need to be stripped from the original firmware. Signed-off-by: Andreas Böhler <dev@aboehler.at>
* ramips: fix switch setup for Xiaomi MiWiFi NanoSungbo Eo2019-12-312-2/+10
| | | | | | | MiWiFi Nano has two LAN ports, which are in reverse order. Add port numbers to them, and disable unused ports. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* scripts/mkits.sh: replace legacy backticks with $()Rosen Penev2019-12-311-2/+2
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/symlink-tree.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | This uses nothing bash specific. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: harmonize leading whitespacesAdrian Schmutzler2019-12-311-1/+1
| | | | | | Convert leading spaces to tabs for consistency in the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/strip-kmod.sh: use sh instead of bashRosen Penev2019-12-311-1/+1
| | | | | | There's nothing bash specific here. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* scripts/strip-kmod.sh: replace legacy backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjusted commit title, added commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: split interface configuration for clearfog pro and baseJosua Mayer2019-12-311-6/+10
| | | | | | | Handle both variants separately. This removes the need for calling swconfig to detect the switch, and simplifies future changes. Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
* ath79: generate firmware image for aircube-ispChristian Mauderer2019-12-312-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a "factory" image for the aircube-isp devices. Note that the firmware can't be uploaded without prior special preparation. For the most recent instructions on how to do that, visit the OpenWRT wiki page of the Ubiquiti airCube ISP for details: https://openwrt.org/toh/ubiquiti/ubiquiti_aircube_isp Current procedure: With the original firmware 2.5.0 it is possible to upload and execute a script via the configuration. To do that download and unpack the original configuration, adapt uhttpd config to execute another lua handler (placed in the config directory) and pack and upload it again. The lua handler can call a script that mounts an overlayfs and modifies the "fwupdate.real" binary so that an unsigned image is accepted. The overlayfs is necessary because a security system (called tomoyo) doesn't allow binaries in other locations than /sbin/fwupdate.real (and maybe some more) to access the flash when executed via network. A big thanks to Torvald Menningen (Snap) from the OpenWRT forum for finding out how to patch the binary so that it accepts an unsigned image. The current step-by-step procedure is: - Use a version 2.5.0 of the original firmware. This is important because a binary file will be modified. - Download a configuration. - Unpack it (it's just a tar gz file without an ending). - Add the following to uhttpd: `````` config 'uhttpd' 'other' list listen_http 0.0.0.0:8080 list listen_http [::]:8080 option 'home' '/tmp/persistent/config/patch/www' option lua_prefix '/lua' option lua_handler '/tmp/persistent/config/patch/handler.lua' `````` - Create a `patch` subfolder. - Create a `patch/www` subfolder. - Create a `patch/handler.lua` with the following content: `````` function handle_request(env) uhttpd.send("Status: 200 OK\r\n") uhttpd.send("Content-Type: text/plain\r\n\r\n") local command = "/bin/sh /tmp/persistent/config/patch/patch.sh 2>&1" local proc = assert(io.popen(command)) for line in proc:lines() do uhttpd.send(line.."\r\n") end proc:close() end `````` - Create a `patch/patch.sh` with the following content: `````` #!/bin/sh -x set -e set -u set -x UBNTBOX_PATCHED="/tmp/fwupdate.real" MD5FILE="/tmp/patchmd5" cat <<EOF > ${MD5FILE} c33235322da5baca5a7b237c09bc8df1 /sbin/fwupdate.real EOF # check md5 of files that will be patched if ! md5sum -c ${MD5FILE} then echo "******** Error when checking files. Refuse to do anything. ********" exit 0 fi # prepare some overlay functionality LOWERDIR="/tmp/lower_root" mkdir -p ${LOWERDIR} mount -t squashfs -oro /dev/mtdblock3 ${LOWERDIR} overlay_some_path() { PATH_TO_OVERLAY=$1 ALIAS=$2 UPPERDIR="/tmp/over_${ALIAS}" WORKDIR="/tmp/over_${ALIAS}_work" mkdir -p ${UPPERDIR} mkdir -p ${WORKDIR} mount -t overlay -o lowerdir=${LOWERDIR}${PATH_TO_OVERLAY},upperdir=${UPPERDIR},workdir=${WORKDIR} overlay ${PATH_TO_OVERLAY} } # patch the ubntbox binary. overlay_some_path "/sbin" "sbin" echo -en '\x10' | dd of=/sbin/fwupdate.real conv=notrunc bs=1 count=1 seek=24598 echo "******** Done ********" `````` - Repack the configuration. - Upload it via the normal web interface. - Wait about a minute. The webserver should restart. - Now there is a second web server at port 8080 which can call the lua script. Visit the page with a web browser. Link is for example http://192.168.1.1:8080/lua - You should see the output of the script with a "*** Done ***" at the end. Note that the patches are not permanent. If you restart the router you have to re-visit the link (but not re-upload the config). - Now you can upload an unsigned binary via the normal web interface. Signed-off-by: Christian Mauderer <oss@c-mauderer.de>
* toolchain: wrapper.sh: harmonize leading whitespacesAdrian Schmutzler2019-12-311-10/+10
| | | | | | | Convert leading spaces to tabs and generally harmonize leading whitespace indent in the file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* toolchain: wrapper.sh: use /bin/sh instead of bashRosen Penev2019-12-311-1/+1
| | | | | | | | No bash features are actually used here. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* apm821xx: mbl_gen_hdd_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* arc770: gen_axs10x_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* archs38: gen_axs10x_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* at91: gen_at91_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm2708: gen_rpi_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-2/+2
| | | | | | | | | | Nothing here needs bash. While at it, remove trailing whitespace. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title, add whitespace comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* gemini: dns313_gen_hdd_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* layerscape: gen_sdcard_head_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: gen_mt7623_emmc_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mxs: gen_sdcard_ext4_ext4.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust prefix of commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mxs: gen_sdcard_vfat_ext4.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [change prefix of commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* omap: gen_omap_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rb532: gen_image.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | Nothing here needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [slightly adjust commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: gen_sunxi_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | This has nothing that needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* zynq: gen_zynq_sdcard_img.sh: switch to /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | This has nothing that needs bash. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: gen_mvebu_sdcard_img.sh: use /bin/shRosen Penev2019-12-311-1/+1
| | | | | | | | There is nothing that needs bash anymore. Signed-off-by: Rosen Penev <rosenp@gmail.com> [add prefix to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts/gen_image_generic.sh: replace deprecated backticks with $()Rosen Penev2019-12-311-1/+1
| | | | | | | | | | This replaces deprecated backticks by more versatile $(...) syntax. Found with shellcheck. Signed-off-by: Rosen Penev <rosenp@gmail.com> [adjust commit title and message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 10:33:38 +0000