aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uqmi: make the proto depend on the usb driverJohn Crispin2014-10-081-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42834
* umbim: dont use proto_block_restartJohn Crispin2014-10-081-29/+24
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42833
* umbim: work out the ifname instead of relying on it being in uciJohn Crispin2014-10-081-2/+16
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42832
* procd: handle hotplug events for the usbmisc subsystemJohn Crispin2014-10-081-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42831
* cns3xxx: fix shared PCI interrupt mappingFelix Fietkau2014-10-071-5/+2
| | | | | | | | | | | | | | This patch originally failed to combine INTA/B/C/D onto a single ARM CPU interrupt. Instead, it mapped INTA/B/C and excluded D. This patch corrects the issue by mapping all four interrupts to the single ARM CPU interrupt. The original intent of the patch still holds as the newer PCB take advantage of isolated interrupts. This fix only applies to older PCB's that do not route INTA/B/C/D to unique external ARM CPU interrupts. Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 42830
* cns3xxx: fix register for enabling MMC/SD pinsFelix Fietkau2014-10-071-2/+1
| | | | | | | | also fixes a GPIO related regression from the upgrade to 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42829
* kernel: move old "rootfs" splitter into separated fileRafał Miłecki2014-10-077-73/+95
| | | | | | | | This will simplify removing it in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42828
* bcm53xx: add Netgear R6300 V2 LEDs and buttonsRafał Miłecki2014-10-061-7/+60
| | | | | | | | Thanks tusc (our forum user) for checking GPIOs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42827
* procd: r42814 added a bad git versionJohn Crispin2014-10-061-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42826
* at91: remove support for TQMa9263John Crispin2014-10-064-488/+0
| | | | | | | | This board is EOL, we should not bother anymore with it. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42825
* lantiq - vgv7519: load rt5362 eeprom from bootloader param patitionJohn Crispin2014-10-064-1/+20
| | | | SVN-Revision: 42824
* lantiq - vgv7519: enable pci busJohn Crispin2014-10-062-3/+4
| | | | SVN-Revision: 42823
* lantiq - vgv7519: remove spi_cs4, since the board use this line for ↵John Crispin2014-10-061-1/+1
| | | | | | something else SVN-Revision: 42822
* lantiq - vgv7519: fix open-drain configuration for stpJohn Crispin2014-10-061-8/+6
| | | | SVN-Revision: 42821
* lantiq - vgv7519: add pci-rst entry into dtsJohn Crispin2014-10-061-0/+6
| | | | SVN-Revision: 42820
* lantiq - vgv7519: remove exin definition copied from dev-board dtsJohn Crispin2014-10-061-8/+0
| | | | SVN-Revision: 42819
* lantiq - vgv7519: we don't have pcie bus so we don't need the reset device ↵John Crispin2014-10-061-5/+0
| | | | | | tree for this board SVN-Revision: 42818
* lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 ↵John Crispin2014-10-061-4/+0
| | | | | | for pci handling SVN-Revision: 42817
* lantiq - vgv7519: fix gphy led configuration (this set correct alt function ↵John Crispin2014-10-061-2/+11
| | | | | | to gpio and let peripherials on pci bus to comes up) SVN-Revision: 42816
* lantiq: fix some alt function on pinctrl-xwayJohn Crispin2014-10-061-0/+15
| | | | SVN-Revision: 42815
* procd: update to latest git HEADJohn Crispin2014-10-061-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42814
* ubox: update to latest git headJohn Crispin2014-10-061-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42813
* fstools: update to latest gitJohn Crispin2014-10-061-2/+2
| | | | | | | | adds support for /dev/vd* virtual io Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42812
* octeon: add patches which are not upstreamed yetJohn Crispin2014-10-062-0/+249
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 42811
* octeon: remove kmod-ath9k from default packagesJohn Crispin2014-10-061-1/+1
| | | | | | | | Looks like the targets are Ubiquiti routers which don't come with any wireless cards. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 42810
* octeon: prepare elf kernel image and md5sum for usb copyingJohn Crispin2014-10-061-0/+2
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 42809
* octeon: fix serial console for 3.14 kernelJohn Crispin2014-10-061-0/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 42808
* ralink: various i2c fixesJohn Crispin2014-10-061-31/+66
| | | | | | | | the driver did not handle all states correctly causing a deadlock of the i2c hw block. Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it> SVN-Revision: 42807
* kernel: add some warnings to the old (built-in) rootfs splitterRafał Miłecki2014-10-064-7/+12
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42806
* kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOTRafał Miłecki2014-10-061-1/+1
| | | | | | | | | | | | This enables dedicated "rootfs" splitter by default. We still keep CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be used as a fallback in case of problems. Once we decide the dedicated partitioner works stable, we should remove the old one completely. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42805
* kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLITRafał Miłecki2014-10-062-13/+16
| | | | | | | | We want to remove that old (built-in) splitter at some point. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 42804
* odhcp6c: add route-workaround for broken IPv6-ISPsSteven Barth2014-10-063-5/+21
| | | | | | | | | | | | | | Some ISP seem to only do stateful DHCPv6 and not sending RAs. This is technically broken because plain DHCPv6 doesn't carry routes. We work around here by faking a default route to the DHCPv6 server if we do not receive a useful RA from the ISP. This workaround can be turned off with: option fakeroutes 0 Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 42803
* nftables: bump to 2014-09-30, disable gmpSteven Barth2014-10-066-42/+5038
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 42802
* base-files: make postinst script run inside a subshellJohn Crispin2014-10-061-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42800
* libnftnl: bump to 2014-10-02Steven Barth2014-10-061-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 42799
* lantiq: led name has changed from adsl -> dslJohn Crispin2014-10-061-4/+4
| | | | | | | | | | make the notify script aware of this. https://dev.openwrt.org/ticket/18005 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42798
* ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7John Crispin2014-10-061-0/+7
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 42797
* ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detectionJohn Crispin2014-10-061-1/+1
| | | | | | | | [ ] conditions should use = instead of == for string equality. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 42796
* ar71xx: simplify TP-LINK model detectionJohn Crispin2014-10-061-5/+1
| | | | | | | | | | All TP-LINK machine names begin with "TP-LINK", so there's no need to check for more specific model names. This also allows adding new models like the Archer series more easily. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 42795
* Fix build when TAR_OPTIONS env variable is setJohn Crispin2014-10-061-0/+2
| | | | | | | | | | | | | | | | | | The build system sets a make variable TAR_OPTIONS to the unpacking command, i.e. "-xf -". Now if an environment variable with the same name is set, the make variable is automatically exported to the environment. The make variable is added to the tar command in the makefile, and tar adds the environment variable. This results in a command like "tar -c /some/dir -xf - -xf -" which of course doesn't work. It is also difficult to spot as the second "-xf -" is not visible on the command line. I suggest this is fixed by unexporting TAR_OPTIONS as I see no use of the evironment variable, and it is changed from the original value anyway. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> SVN-Revision: 42794
* iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no ↵John Crispin2014-10-061-0/+2
| | | | | | | | | | | subsystem vendor/device IDs The AR9580 with the new ID can be found in the EnGenius ESR900 and the QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750. Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 42793
* ar71xx: add support for TP-LINK TL-WR847N v8 (clone of TL-WR841N/ND v8)John Crispin2014-10-061-1/+2
| | | | | | Signed-off-by: Jaehoon You <teslamint@gmail.com> SVN-Revision: 42792
* kernel: add rtc-ds1307 module supportJohn Crispin2014-10-061-0/+18
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42791
* kernel: add ledtrig-transient module supportJohn Crispin2014-10-061-0/+15
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42790
* ramips: D-Link DIR-810L: make led naming consistent with other boardsJohn Crispin2014-10-062-5/+5
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 42789
* ralink: Add missing code to free GPIO on Ralink SoCJohn Crispin2014-10-061-11/+27
| | | | | | | Signed-off-by: schildt@ibr.cs.tu-bs.de Acked-by: info@gerhard-bertelsmann.de SVN-Revision: 42788
* hostapd: read missing parameter for dynamic VLANsJohn Crispin2014-10-061-1/+1
| | | | | | | | | | In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming parameter is not read while setting up the config, so it always defaults to 1. Signed-off-by: Reiner Herrmann <reiner@reiner-h.de> SVN-Revision: 42787
* ar71xx: add LED defaults for the EnGenius ESR1750John Crispin2014-10-061-0/+5
| | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> SVN-Revision: 42786
* ramips: Support for RAMIPS based Tripmate HT-TM02 boardJohn Crispin2014-10-068-0/+153
| | | | | | | | | | | | Provides support for the Tripmate HT-TM02 personal router including LEDs and reset button. “Mode” switch is not supported. New profile includes full set of packages required to enable LEDs, USB, and LUCI. Patches were applied against trunk snapshot r42649. Functionality has been tested in AP, basic wifi client, wifi router, and routed client modes - all good. Signed-off-by: Ron Curry <wingspinner@gmail.com> SVN-Revision: 42785
* firmware-utils: add NEXX factory image supportJohn Crispin2014-10-061-0/+16
| | | | | | | This patch adds support to encode and decode images for certain types of NEXX routers. SVN-Revision: 42784
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 14:02:07 +0000