aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: libertas-spi: deactivate for UML targetHauke Mehrtens2016-03-171-1/+1
| | | | | | | | | The UML target does not have spi support. This fixes a build problem found by the build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49034
* kernel: add missing kernel optionsHauke Mehrtens2016-03-172-0/+2
| | | | | | | | This was found by the build bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49033
* kernel: update kernel 4.4 to version 4.4.6Hauke Mehrtens2016-03-1711-57/+12
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49032
* ar71xx: Use PHY fixups for Open Mesh MR1750John Crispin2016-03-161-3/+22
| | | | | | | | | | | | | | | | | | The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in different ways. u-boot only modifies the ETH_CFG of the QCA955x based on the link speed. But OpenWrt can only modify the PHY delays based on the link speed. This can lead to communication problems when u-boot initializes the ETH_CFG for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY delays to an incompatible value. Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and only rely on the AT803x PHY settings. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49031
* ar71xx: Use PHY fixups for Open Mesh MR900John Crispin2016-03-161-3/+22
| | | | | | | | | | | | | | | | | | The delays of PHY/MAC on the MR900 are done by u-boot and OpenWrt in different ways. u-boot only modifies the ETH_CFG of the QCA955x based on the link speed. But OpenWrt can only modify the PHY delays based on the link speed. This can lead to communication problems when u-boot initializes the ETH_CFG for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY delays to an incompatible value. Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and only rely on the AT803x PHY settings. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49030
* ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955xJohn Crispin2016-03-1619-21/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some u-boot versions for QCA955x change the delays based on the link speed during boot. This usually breaks the support of other linkspeeds when OpenWrt is booted. It also conflicts with the at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own values in QCA955X_GMAC_REG_ETH_CFG. The default RGMII values from the Atheros u-boot are currently used to preset the existing mach files. These may have to be adjusted for boards using different values but which are not currently set them explicitely in OpenWrt. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Christian Beier <cb@shoutrlabs.com> Cc: Chris R Blake <chrisrblake93@gmail.com> Cc: Benjamin Berg <benjamin@sipsolutions.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Matthias Schiffer <mschiffer@universe-factory.net> Cc: Dirk Neukirchen <dirkneukirchen@web.de> Cc: Christian Mehlis <christian@m3hlis.de> Cc: Luka Perkov <luka@openwrt.org> Cc: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 49029
* ar71xx: Clear bits in ath79_setup_qca955x_eth_cfgJohn Crispin2016-03-161-3/+13
| | | | | | | | | | | Some u-boot versions for QCA955x set currently not cleared bits depending on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c file is responsible to select the correct configuration bits and thus the ath79_setup_qca955x_eth_cfg has to clear the unset. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49028
* ar71xx: Extend the list of bits in QCA955X_GMAC_REG_ETH_CFGJohn Crispin2016-03-164-30/+36
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49027
* ar71xx: Add support for the OMYlink OMY-X1John Crispin2016-03-1613-0/+164
| | | | | | | | | | | | This patch adds support for the OMYlink OMY-X1 https://wiki.openwrt.org/toh/omylink/omy-x1 http://www.omylink.com/ Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 49026
* tools/flex: update to 2.6.1John Crispin2016-03-163-24/+18
| | | | | | | | | | | | Update flex to 2.6.1 * Flex has moved to Github, adjust download link * Remove patch that has been applied upstream * Disable building tests to avoid circular dependency to bison - disable also docs and examples at the same time Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 49025
* ramips: Add support for Xiaomi MiWiFi NanoJohn Crispin2016-03-167-1/+128
| | | | | | | | | | | | | | | Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> v3 includes changes suggested by L. D. Pinney & Karl Palsson- Eliminate en25q64 (4MB) flash chip Alphabetization Remove hyphen in model Rename profile from miwifinano.mk to xiaomi.mk Add gpios that are attached to leds SVN-Revision: 49024
* brcmfmac: Add Raspberry Pi 3 supportJohn Crispin2016-03-163-0/+29
| | | | | | | | | | - Enable SDIO support on brcmfmac. - Disable power managment for brcm2708 target. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49023
* kirkwood: refresh patchesLuka Perkov2016-03-141-4/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49022
* kirkwood: drop 3.18Luka Perkov2016-03-1413-1500/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49021
* kirkwood: switch to 4.4Luka Perkov2016-03-141-1/+1
| | | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49020
* kirkwood: add 4.4 supportLuka Perkov2016-03-1411-0/+1349
| | | | | | | | | | | | | | Dropped patches because they applied upstream: - 120-iomega_ix2_200.patch - 150-pogoplug_e02.patch Tested on dockstar and goflexnet. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49019
* uboot-kirkwood/goflexhome: explicit define the size of the last partitionLuka Perkov2016-03-141-1/+1
| | | | | | | | | Explicit sets the size of the mtdparts, because the kernel has also an explicit value. If they have diffent sizes the ubi won't be detected. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49018
* uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"Luka Perkov2016-03-141-0/+9
| | | | | | | | | otherwise the uboot is missing important commands like bootz Signed-off-by: Martin Mueller <mm@sig21.net> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49017
* uboot-kirkwood/goflexhome: update bootargs to use new ubi styleLuka Perkov2016-03-141-0/+30
| | | | | | | | | | Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a ubi volume. Dropping the mtd parts because the mtd layout is saved in the device-tree, which is appended to the zImage. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49016
* kirkwood/goflexnet/goflexhome: change mtd layout to use the last 3 mbLuka Perkov2016-03-142-2/+2
| | | | | | | | | Previous the uboot was overwriting the device-tree's mtd layout to use the last 3 mb. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49015
* kirkwood/goflexhome/goflexnet: merge "root" and unused mtd partitions into ↵Luka Perkov2016-03-142-16/+35
| | | | | | | | | | | | one volume "ubi" The kernel will automatic attach mtd partitions named 'ubi' to ubi0. Renaming the "root" partition into "ubi" will safe arguments from the kernel cmdline. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49014
* linux/kirkwood: migrate goflexhome/goflexnet to new ubi styleLuka Perkov2016-03-141-7/+13
| | | | | | | | Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
* uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstarLuka Perkov2016-03-141-12/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49012
* kirkwood/dockstar: rename partition into ubi to use auto detection of target mtdLuka Perkov2016-03-141-1/+1
| | | | | | | | | the kernel tries to use "ubi" or "data" labeled partition to find it's root filesystem. dockstar don't need anymore mtdparts= nor root= bootarguments Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49011
* kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) imagesLuka Perkov2016-03-142-4/+15
| | | | | | | | | | | | | | | | | | | The new image requires `bootz` because of devicetree appending. To flash a new image boot initramfs: tftpboot 0x800000 openwrt-kirkwood-dockstar-initramfs-kernel.bin bootz 0x800000 # detach if already attached ubidetach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') # scp openwrt-kirkwood-dockstar-squashfs-factory.bin /tmp ubiformat -f /tmp/openwrt-kirkwood-dockstar-squashfs-factory.bin # attach is important to resize rootfs_data otherwise it wont boot ubiattach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}') Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49010
* kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi imagesLuka Perkov2016-03-141-1/+16
| | | | | | | | depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49009
* kirkwood: add feature devicetreeLuka Perkov2016-03-141-1/+1
| | | | | | | | this platform already uses devicetree Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49008
* brcm47xx: image: create standard TRX images using new building systemRafał Miłecki2016-03-111-15/+20
| | | | | | | | | | | | | | | | | | | | | | | | Apart from using our new building system there are 2 more changes: 1) Limit amount of images So far we were generating all standard images (optimized one and two with no loader) for every SUBTARGET. This is not needed, as e.g. the only device requiring gzipped kernel is legacy Huawei E970. 2) Change output names The new image building system requires specifying device name. This forced picking some and resulted in: openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx becoming: openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 49006
* Revert "kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)"Jo-Philipp Wich2016-03-111-54/+0
| | | | | | This reverts commit 845d82da156781135b027ecf75ff67e2253e06dd. SVN-Revision: 49005
* oxnas: complete NAND driver clean-upJohn Crispin2016-03-101-4/+0
| | | | | | | | some bit rot was accidentally left-out in r48986, remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48997
* procd: fix respawn related warningJohn Crispin2016-03-101-0/+1
| | | | | | | | WARNING: Variable 'respawn' does not exist or is not an array/object Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48996
* tools/cmake: fix compile on Alpine LinuxJohn Crispin2016-03-101-0/+17
| | | | | | | | | | | | | | | | | | internal jsoncpp include order leads to multiple build errors on Alpine Linux which uses musl libc use include order from upstream jsoncpp first error was: In file included from /usr/include/c++/5.3.0/stdexcept:38:0, from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/include/json/assertions.h:16, from /home/..../openwrt/build_dir/host/cmake-3.4.3/Utilities/cmjsoncpp/src/lib_json/json_reader.cpp:7: /usr/include/c++/5.3.0/exception:35:9: error: '#pragma' is not allowed here #pragma GCC visibility push(default) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 48995
* ramips: Add support for GL-MT750John Crispin2016-03-107-1/+177
| | | | | | | | This patch adds support for GL-MT750. GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps. It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support. SVN-Revision: 48994
* ramips: Add support for GL-MT300NJohn Crispin2016-03-107-1/+173
| | | | | | | | This patch adds support for GL-MT300N. GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM, 2 LANs, USB, UART, GPIO and PoE support. SVN-Revision: 48993
* ramips: Add support for GL-MT300AJohn Crispin2016-03-107-0/+190
| | | | | | | | This patches adds support for GL-MT300A. GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM, Two LANs, USB, UART and MMC daughter board. SVN-Revision: 48992
* tools/findutils: Update to 4.6.0John Crispin2016-03-102-161/+3
| | | | | | | | | Update GNU findutils to the new stable version 4.6.0 Remove the patch for 32-bit buildhosts as the issue is fixed upstream. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48991
* package/devel/gdb: Update to 7.11John Crispin2016-03-102-3/+3
| | | | | | | | Update gdb to version 7.11 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48990
* toolchain/gdb: Update to 7.11John Crispin2016-03-104-5/+5
| | | | | | | | Update gdb to version 7.11 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48989
* pkg-config: Update to 0.29.1John Crispin2016-03-101-4/+4
| | | | | | | | | * Bump pkg-config version to 0.29.1 * Use https for the source download (http gets directed there) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48988
* mm-macros: update to 0.9.10John Crispin2016-03-101-3/+3
| | | | | | | | Bump mm-macros to 0.9.10 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> SVN-Revision: 48987
* oxnas: clean-up NAND driver to fix probing issueJohn Crispin2016-03-101-13/+5
| | | | | | | | | | | A re-write of the driver based on xway_nand.c and constants as well as the cmd_ctrl() function from the original oxnas_nand.c resulted in a extremely similar looking file (see diffsize), and fixes the issue of NAND not being detected on newer kernels. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48986
* brcm2708: update patches to latest versionJohn Crispin2016-03-1013-6/+763
| | | | | | | | | | | | As usual these patches were extracted from the raspberry repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y - Disable unused MFD RPISENSE driver. - Disable ethernet HW checksums in order to avoid kernel exceptions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48985
* procd: support pidfile writing.John Crispin2016-03-101-1/+2
| | | | | | | | | | | | procd from revision b12bb150ed38a4409bef5127c77b060ee616b860 supports writing a pidfile. This adds support for setting that parameter with standard init script hooks: procd_set_param pidfile /var/run/someprocess.pid Signed-off-by: Karl Palsson <karlp@etactica.com> SVN-Revision: 48984
* ar71xx: Arduino Yun board 'WLAN RST' button supportJohn Crispin2016-03-101-0/+21
| | | | | | | | This patch adds support for Arduino Yun board "WLAN RST" button. Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com> SVN-Revision: 48983
* kernel: Linux IP Virtual Server kernel modules (netfilter.mk patch)John Crispin2016-03-101-0/+54
| | | | | | | | | | | | IPVS (IP Virtual Server) implements transport-layer load balancing inside the Linux kernel so called Layer-4 switching. IPVS running on a host acts as a load balancer at the front of a cluster of real servers, it can direct requests for TCP/UDP based services to the real servers, and makes services of the real servers to appear as a virtual service on a single IP address. Signed-off-by: Mauro Mozzarelli <mauro@ezplanet.net> SVN-Revision: 48982
* procd: bump to latest git HEADJohn Crispin2016-03-101-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 48981
* brcm63xx: fix BCM3368 interrupt controller addressesJohn Crispin2016-03-101-2/+2
| | | | | | | | | Looks like the addresses for BCM3368 were wrongly defined when DT support was introduced. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48980
* brcm63xx/lzma-loader: fix O32 ABI conformanceJohn Crispin2016-03-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | According to the calling convention of the o32 ABI the caller function must reserve stack space for $a0-$a3 registers in case the callee needs to save its arguments. The assembly code of the loader does not reserve stack space for these registers thus when the 'loader_main' function needs to save its arguments, those will be stored in the 'workspace' area instead of the stack. Because the workspace area is also used by other part of the code, the saved register values gets overwritten and this often leads to failed kernel boots. Fix the code to reserve stack space for the registers to avoid this error. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> [noltari: apply the fix for brcm63xx too] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48979
* tools/flock: fix compile on Alpine LinuxJohn Crispin2016-03-101-0/+1
| | | | | | | | | | | | fixes build errors: src/flock.c:208:34: error: 'O_NOCTTY' undeclared (first use in this function) fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666); src/flock.c:208:43: error: 'O_CREAT' undeclared (first use in this function) fd = open(filename, O_RDONLY|O_NOCTTY|O_CREAT, 0666); Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 48978
* ar71xx: add support for the Telldus TellStick ZNet LiteJohn Crispin2016-03-1013-0/+189
| | | | | | Signed-off-by: Micke Prag <micke.prag@telldus.se> SVN-Revision: 48977
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 20:39:33 +0000