aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools: build dosfstools and mtools for sunxiZoltan Herpai2014-09-071-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42435
* ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331Felix Fietkau2014-09-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | While the AR9331 has a gigabit MAC towards the internal switch, the integrated PHYs however are only 100-base-tx capable. The existing code however advertieses gigabit capability in the link status word. If you attach such a PHY to a gigabit capable switch on the remote end, with some probability it attempts to negotiate gigabit and fails, falling baco to the AR9331 assuming a 10mbit half-duplex link. This has been observed quite frequently with the Carambola2 and gigabit capable switches. In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally for both AR9331 ethernet ports. This is most likely wrong. Despite the two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a 100base-T PHY via MII. The has_gbit attribute is used in the ethernet driver to determine the supported link modes. So either pdata->has_gbit is not set to 1 anymore, or the ethernet driver needs to be modified to determine the advertised link code word on another criteria than pdata->has_gbit. This patch implements the former solution. Signed-off-by: Harald Welte <laforge@gnumonks.org> SVN-Revision: 42432
* mac80211: enable DFS support for ath9k/10k by defaultJonas Gorski2014-09-071-2/+2
| | | | | | | | | The DFS pattern detector now supports all three regions; ETSI, FCC and JP, so there is no reason to not have it enabled anymore. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42431
* toolchain/binutils: do not install host libiberty.a into target lib dirJonas Gorski2014-09-071-0/+1
| | | | | | | | | | | Binutils target build will pick it up and break build on e.g. arm: libtool: link: arm-openwrt-linux-uclibcgnueabi-gcc -shared .libs/archive.o .libs/archures.o .libs/bfd.o .libs/bfdio.o .libs/bfdwin.o .libs/cache.o .libs/coffgen.o .libs/corefile.o .libs/format.o .libs/init.o .libs/libbfd.o .libs/opncls.o .libs/reloc.o .libs/section.o .libs/syms.o .libs/targets.o .libs/hash.o .libs/linker.o .libs/srec.o .libs/binary.o .libs/tekhex.o .libs/ihex.o .libs/stabs.o .libs/stab-syms.o .libs/merge.o .libs/dwarf2.o .libs/simple.o .libs/compress.o .libs/verilog.o .libs/elf32-arm.o .libs/elf32.o .libs/elf-nacl.o .libs/elf-vxworks.o .libs/elf.o .libs/elflink.o .libs/elf-attrs.o .libs/elf-strtab.o .libs/elf-eh-frame.o .libs/dwarf1.o .libs/elf32-gen.o .libs/cpu-arm.o -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/build_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/binutils-2.24/bfd/../libiberty/pic -liberty -lz -march=armv5te -mtune=arm926ej-s -mfloat-abi=soft -Wl,-lc -Wl,--as-needed -Wl,-lm -Wl,--no-as-needed -Wl,-soname -Wl,libbfd-2.24.so -o .libs/libbfd-2.24.so /mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib/libiberty.a: could not read symbols: File format not recognized Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42430
* ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes ↵Felix Fietkau2014-09-061-2/+0
| | | | | | | | (#13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42429
* ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)Felix Fietkau2014-09-061-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42428
* ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 ↵Felix Fietkau2014-09-061-1/+1
| | | | | | | | (improves performance) (patch from #13072) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42427
* atheros: remove linux 3.10Felix Fietkau2014-09-0612-6369/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42426
* sunxi: bump kernel to 3.14.16Zoltan Herpai2014-09-061-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42425
* sunxi: update pcDuino3 profile to the new u-bootZoltan Herpai2014-09-061-1/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42424
* sunxi: update Bananapi profile to the new u-bootZoltan Herpai2014-09-061-6/+6
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42423
* uboot-sunxi: bump to 2014.04Zoltan Herpai2014-09-064-4357/+3439
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42422
* uml: bump to 3.14.16Nicolas Thill2014-09-056-257/+3830
| | | | | | Signed-off-by: Nicolas Thill <nico@openwrt.org> SVN-Revision: 42421
* uclient: update to the latest version, fixes some crash issuesFelix Fietkau2014-09-041-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42419
* at91: build images for AT91SAMA5D3XPLAINEDFlorian Fainelli2014-09-032-0/+16
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42418
* at91: add SAMA5D3 subtargetFlorian Fainelli2014-09-032-0/+19
| | | | | | | | Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42417
* at91: move legacy Kconfig options to subtargetFlorian Fainelli2014-09-032-33/+33
| | | | | | | | | Some Kconfig options are only relevant for the legacy platforms, move them where they belong Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42416
* at91: switch to 3.14Florian Fainelli2014-09-031-2/+2
| | | | | | | | | We need a new kernel version to support Cortex-A5 based platforms such as SAMA5GD3. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42415
* at91: add 3.14 supportFlorian Fainelli2014-09-037-0/+576
| | | | | | | | Add support for Linux 3.14 for the Atmel's AT91 platform. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42414
* at91: move 3.10 specific files and patchesFlorian Fainelli2014-09-037-0/+0
| | | | | | | | | | In preparation for adding 3.14 kernel support, move files and patches to a separate per-version directory since some of them will have incompatible changes (e.g: dts) Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42413
* at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBAFlorian Fainelli2014-09-031-0/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42412
* at91: add CONFIG_USB_OHCI_HCD_AT91 to usb-ohciFlorian Fainelli2014-09-031-0/+1
| | | | | | | | | The at91 OHCI driver has a separate Kconfig symbol with newer kernels, include it. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42411
* at91: fix typo on CalaoFlorian Fainelli2014-09-031-1/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42410
* include: add Cortex-A5 CPU_TYPEFlorian Fainelli2014-09-031-0/+1
| | | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42409
* at91: create a legacy subtargetFlorian Fainelli2014-09-035-1/+8
| | | | | | | | | In preparation for adding SAMA5D3 support, move the legacy ARMv5 based platforms to a separate subtarget. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42408
* mdns: update to latest git headJohn Crispin2014-09-021-2/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42407
* mtd: disable trx_check() for ar71xx, fixes a regression introduced in r42403Felix Fietkau2014-09-021-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42405
* mtd: Fix trx check after partition rename ("linux" to "firmware")Felix Fietkau2014-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system. I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware". This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware": commit 86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73> Date: Sun Dec 1 16:32:32 2013 +0000 brcm47xx: use "firmware" partition name ... Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 38973 Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de> SVN-Revision: 42403
* omap: remove 3.12 kernel patchesFelix Fietkau2014-09-0251-4956/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42401
* cns3xxx: support isolated PCI interrupts on newer Laguna PCBsFelix Fietkau2014-09-021-0/+196
| | | | | | | | | | | | | | | | | The cns3xxx uses irq61 for pcie0_intr which in the case of a PCIe-to-PCI bridge ends up combining INTA/B/C/D on a single ARM CPU interrupt. This is not optimal when you have multiple cores. To overcome this limitation an enhancement was made on newer Laguna PCB's that support miniPCI cards to route the INTA/B/C/D signals to unique external ARM CPU interrupts which can help balance CPU core utilization and in some cases increase overall system performance or responsiveness. For more details see: http://trac.gateworks.com/wiki/multicoreprocessing#PCIInterruptsteering Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42400
* sdk: keep $(STAGING_DIR)/usr/bin, at least curl needs itFelix Fietkau2014-09-011-2/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42397
* mac80211: rt2x00: fix of ht20/ht40 switching fixJohn Crispin2014-09-011-1/+1
| | | | | | | | r42348 uses a wrong register Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 42349
* mac80211: rt2x00 correctly set ht20/ht40 filterJohn Crispin2014-09-011-0/+33
| | | | | | | | Simple patch to correct ht20/ht40 switching. Tested with rt3290/rt3352/rt5350 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 42348
* netifd: update to the latest version, adds interface cleanup fixesFelix Fietkau2014-08-311-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42345
* netifd: update to the latest version, fixes proto-shell teardown after renewFelix Fietkau2014-08-311-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42344
* Add 'subversion' build dependency to READMEFelix Fietkau2014-08-311-2/+2
| | | | | | | | Fixes #17725. Signed-off-by: Brian Norris <computersforpeace@gmail.com> SVN-Revision: 42343
* nettle: disable mips16 support to improve performanceFelix Fietkau2014-08-311-0/+1
| | | | | | Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org> SVN-Revision: 42341
* imagebuilder: remove postinst files before generating imageFelix Fietkau2014-08-311-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42339
* binutils: link libbfd and libopcodes dynamically againJonas Gorski2014-08-301-1/+4
| | | | | | | | | | | | | Build libbfd and libopcodes as shared libraries, else they get linked statically into every binary, increasing each binary size by ~650kB. Reduces binutils package size to old expected values. Fixes #17060. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 42337
* ipx806x: bump to 3.14.16John Crispin2014-08-301-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42336
* target: set myself as maintainerJohn Crispin2014-08-303-0/+3
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42335
* ipq806x: Add support for IPQ806x chip familyJohn Crispin2014-08-30186-0/+46248
| | | | | | | | | | | | | | | | | | | | | | Patches are generated using the "format-patch" command from the following location: *https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base *rev=0771849495b4128cac2faf7d49c85c729fc48b20 Patches numbered 76/77/102/103 have already been integrated in 3.14.12, so they're not in this list. All these patches are either integrated are pending integration into kernel.org, therefore these patches should go away once the kernel gets upgraded to 3.16. Support is currently limited to AP148 board but can be extended to other platforms in the future. These changes do not cover ethernet connectivity. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 42334
* ar71xx: disable ethernet descriptor splitting for now, as it seems to cause ↵Felix Fietkau2014-08-301-0/+2
| | | | | | | | tx hangs in some setups Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42333
* kirkwood: fix typos on DEBUG_LL_UART_*Florian Fainelli2014-08-301-2/+2
| | | | | | | | | We were prompted for which DEBUG_LL_UART implementation we want, fix the typos such that the build continues. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 42332
* ar71xx: select m25p80 support instead of spi support where used by mach ↵Felix Fietkau2014-08-298-18/+22
| | | | | | | | files (#17699) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42331
* mac80211: fix crash when unloading drivers (#17706)Felix Fietkau2014-08-291-0/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42329
* ar71xx: split packets into multiple descriptors on ar716xFelix Fietkau2014-08-293-28/+105
| | | | | | | | | | | This improves performance when doing concurrent rx/tx on a single ethernet MAC, e.g. when routing between VLANs. Fixes #13072 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42328
* procd: run the mdns register outside the sub shell containerJohn Crispin2014-08-291-3/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42327
* dropbear: add mdns support to the init.d scriptJohn Crispin2014-08-291-2/+5
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42326
* mdns: update to latest gitJohn Crispin2014-08-292-2/+3
| | | | | | | | | | | | * ipv6 * 4 bugs in the dns parser * service announcement * tx goodbye support * proper handling of rx goodbye Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42325
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 05:47:22 +0000