aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: fix GL-inet GL-MT300N-V2 WAN/LAN MAC addressJohn Marrett2017-07-152-1/+4
| | | | | | | | | | | | | | Correct MAC address lookup to appropriate offset based on vendor source. Override the WAN MAC to use the same address as LAN. The switch driver increments the base MAC address for the WAN vlan but the stock firmware uses the same MAC address for all interfaces. Based on vendor source commit https://github.com/domino-team/lede-1701/commit/efb0518 Signed-off-by: John Marrett <johnf@zioncluster.ca>
* imx6: fix DualLite/Solo GW551X board detectionMathias Kresin2017-07-151-1/+1
| | | | | | The model name is a different one in the device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* nftables: Update to 0.7Nick Brassel2017-07-152-3/+79
| | | | | | Updated nftables to latest. Signed-off-by: Nick Brassel <nick@tzarc.org>
* kernel: update kernel 4.9 to 4.9.37Koen Vandeputte2017-07-1545-316/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Refreshed all patches - Removed upstreamed - Adapted 4 patches: 473-fix-marvell-phy-initialization-issues.patch ----------------------------------------------- Removed hunk 5 which got upstreamed 403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch 404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch -------------------------------------------------------------- Adapted these 2 RFC patches, merging the delta's from an upstream commit (see below) which made it before these 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux- stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0 180-usb-xhci-add-support-for-performing-fake-doorbell.patch ----------------------------------------------------------- - Moved fake_doorbell bitmask due to new item Compile tested on: cns3xxx, imx6 Run tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/flex: Revert "tools/flex: add autoreconf"Hauke Mehrtens2017-07-151-1/+0
| | | | | | | | | This was already done in commit 91e262c6b35a7 ("tools: flex: fix build with automake 1.15.1") This reverts commit 6b127d86390f85e92e59f3dba04fa585efb3b2c5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* zlib: use default Build/Configure ruleStijn Tintel2017-07-141-11/+9
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lzo: use default Build/Configure ruleStijn Tintel2017-07-141-6/+3
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts/gen_image_generic.sh: drop NOGRUB variableStijn Tintel2017-07-141-2/+0
| | | | | | It's not used since commit 816a9b30f683b8376423ff029d40e0e4a2701026. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts/gen_image_generic.sh: move from x86/imageStijn Tintel2017-07-142-1/+1
| | | | | | The script can also be useful for other targets. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts: make all scripts executableStijn Tintel2017-07-142-0/+0
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts/openbsd.sh: remove scriptStijn Tintel2017-07-141-24/+0
| | | | | | | | Commit 6f5f328003128c95af2ffb3876eeadb473c463a0 removed freebsd.sh because it was outdated and bad practice. Let's be consistent and remove openbsd.sh as well. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* curl: bump to version 7.54.1Alif M. Ahmad2017-07-143-5/+5
| | | | | | Upgrade the curl package to latest version. Patches refreshed. Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* ar71xx/image: change unifi UBNT_CHIP to ar7240Alexander Couzens2017-07-131-1/+1
| | | | | | | | Verified by OEM firmware images which contains the same chip. Tested-by: Andreas Bräu <ab@andi95.de> Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ar71xx: set US region code for TP-Link TL-WR710N v1 imageMatthias Schiffer2017-07-121-0/+1
| | | | | | | Non-US versions of the TP-Link TL-WR710N v1 don't have a region code so far, so we can just set US unconditionally. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* opkg: bump to version 2017-07-11Yousong Zhou2017-07-121-3/+3
| | | | | | | | | Commits since last 2017-05-03 52fc006 pkg_alternatives: pass if the desired symlink already exists c668fce opkg: add --no-check-certificate argument Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: add iptables-mod-rpfilter packageAlin Nastac2017-07-113-0/+34
| | | | | | | | | Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw -I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to become full when a packet flood with randomly selected source IP addresses is received from the lan side. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* uci: update to the latest versionHans Dedecker2017-07-111-3/+3
| | | | | | | | | | | | | | c4df32b file: remove redundant NULL check on return value of uci_realloc() 5d08b7f build: fix BUILD_STATIC 49ec6ef Fix skipping directories in uci_list_config_files c203c2f Revert "mandatory anonymous section identifier" 0a1a2fc uci/lua: add explicit close() method 7daf942 uci/lua: add list_configs() function fe45f97 test: adjust for auto-naming anonymous sections 2eb9c09 cli: remove now-defunct UCI_FLAG_EXPORT_NAME support df72af4 mandatory anonymous section identifier Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: automatically handle paths and symlinks for RAMFS_COPY_BINMatthias Schiffer2017-07-1110-46/+40
| | | | | | | | | | | | Depending on busybox applet selection, paths of basic utiilties may differ, and may not work as symlinks to busybox. Simply using whatever binary is found in PATH and detecting symlinks automatically is more robust and easier to maintain. The list of binaries is also slightly cleaned up and duplicates are removed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kirkwood: upgrade: fix RAMFS_COPY_*Matthias Schiffer2017-07-112-21/+4
| | | | | | | | RAMFS_COPY_* are moved to platform.sh toplevel. The nand_do_upgrade call is moved to platform_do_upgrade. Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ipq806x: upgrade: fix RAMFS_COPY_*Matthias Schiffer2017-07-112-21/+5
| | | | | | | | | RAMFS_COPY_* are moved to platform.sh toplevel. The unneeded linksys_preupgrade function is removed, and the nand_do_upgrade call is moved to platform_do_upgrade. Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* bcm53xx: upgrade: fix RAMFS_COPY_*Matthias Schiffer2017-07-112-3/+3
| | | | | Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: upgrade: correctly handle nand_do_upgrade argument passed from ↵Matthias Schiffer2017-07-112-2/+2
| | | | | | | preupgrade Fixes: 30f61a34b4cf "base-files: always use staged sysupgrade" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* dnsmasq: restore ability to include/exclude raw device namesJo-Philipp Wich2017-07-102-3/+3
| | | | | | | | | | | | | Commit 5cd88f4 "dnsmasq: remove use of uci state for getting network ifname" broke the ability to specify unmanaged network device names for inclusion and exclusion in the uci configuration. Restore support for raw device names by falling back to the input value when "network_get_device" yields no result. Fixes FS#876. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: image: simplify Meraki MR16 device definitionPiotr Dymacz2017-07-091-10/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix upgrade platform check for Compex WPJ558Enrique Giraldo2017-07-091-1/+1
| | | | | | The magic number was wrong and always marked the images as invalid. Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net>
* ar71xx: support LED in TP-Link TL-WR902AC RJ45 socketPiotr Dymacz2017-07-092-3/+8
| | | | | | | | | TP-Link TL-WR902AC has another one, tiny LED inside RJ45 socket which is attached to GPIO15. Add support for it, use it as a "lan" LED and rename old one to "internet". Also, fix uci option name for "lan" LED in system configuration ("wan" -> "lan"). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: verify TP-Link TL-WR902AC sysupgrade imagePiotr Dymacz2017-07-091-2/+2
| | | | | | | Until we enable requirement for metadata in sysupgrade images under ar71xx target, this prevents users from using wrong image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* firmware-utils: tplink-safeloader: fix Archer C60 factory imageHenryk Heisig2017-07-091-2/+0
| | | | | | | | This commit fixes build factory image for TP-Link Archer C60v1. Size of partition "SupportList" is only 256 bytes, and can contain only 3 entries. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: add metadata to some TP-Link imagesHenryk Heisig2017-07-091-2/+9
| | | | | | | This commit adds metadata to TP-Link sysupgrade images created by tplink-safeloader with uImage kernel header. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ncurses: add libnucrses-dev packageDaniel Golle2017-07-081-0/+20
| | | | | | It's needed to use the SDK and IB on an OpenWrt/LEDE host. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mtd-utils: use source package name for lzo in PKG_BUILD_DEPENDSMatthias Schiffer2017-07-081-1/+1
| | | | | | PKG_BUILD_DEPENDS should always refer to source package names. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* firmware-utils: mktplinkfw2: use static board struct for custom valuesRafał Miłecki2017-07-081-18/+15
| | | | | | | | | It seems simpler to store all custom (command line set) option values in a struct identical to the predefined ones. It doesn't require: 1) Having so many global variables 2) Copying data from the predefined boards Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firmware-utils: mktplinkfw2: update firmware headerRafał Miłecki2017-07-081-26/+26
| | | | | | | 1) Be consistent and use tabs 2) Drop FIXME from boot comments - some images use these fields normally Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* acx-mac80211: remove cobalt referenceMathias Kresin2017-07-071-1/+1
| | | | | | The cobalt target was removed with 22b38f145da7. Signed-off-by: Mathias Kresin <dev@kresin.me>
* acx-mac80211: disable for kernel 4.9+Mathias Kresin2017-07-071-1/+1
| | | | | | | Due to changes in the PCI subsystem this driver doesn't compile with kernel 4.9. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: sound-mt7620: fix dependencies for kernel 4.9Mathias Kresin2017-07-071-0/+2
| | | | | | | With kernel 4.8 common used code was moved to a shared kmod. Add the missing dependency to the shared snd-soc-simple-card-utils.ko. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: add missing symbolsMathias Kresin2017-07-072-0/+2
| | | | | | Fixes the ramips and xburst/qi_lb60 build. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix typo in EASY80920.dtsiMathias Kresin2017-07-071-1/+1
| | | | | | | There is no device tree property named phynmode0. Use phy-mode as it is done for the other ethernet nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add Netgear DM200 supportThomas Nixon2017-07-074-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netgear DM200 is an inexpensive VDSL modem: CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz RAM: 64MiB Flash: 8MiB Ethernet: 1x100M DSL: VDSL2+, ADSL2+ reset button, 3x bi-color LEDs Serial port is 115200 baud, on the 4 pin header; pins from the bottom to top are GND, RX, TX. To upgrade from the vendor firmware, upload factory.img The DM200 bootloader supports flashing over TFTP; hold the reset button while powering on the device, and wait for the power light to start flashing green before releasing. The device is now listening on 192.168.0.1/24, and can be sent a factory.img or a netgear image with a TFTP put. Once the image is loaded, it will be written to the flash, and the device will reboot; this will take a few minutes. Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their own ports for this device and provided valuable feedback. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* lantiq: set up DSL front-end GPIOs if they existThomas Nixon2017-07-071-0/+14
| | | | | | | This is necessary for devices using the PSB80108/VRX220LD front-end (currently only known on the Netgear DM200). Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* ramips: simplify ubnt-erx-sfp device definitionMatthias Schiffer2017-07-061-7/+2
| | | | | | | | Most of the ubnt-erx definition can be reused; the package removals in DEVICE_PACKAGES have become redundant after d17cb4a68a45 "ramips: purge default packages on MT7621". Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* odhcpd: update to the latest versionHans Dedecker2017-07-061-3/+3
| | | | | | | | | | | | f0d78e7 ndp: optimize check_addr6_updates code 94afe3b ndp: fix syslog tracing for netlink neigbor and address events 18df6cc treewide: rework logic to retrieve IPv6 interface addresses 803b83e router: use enum to specify order and index of iov struct 5dad295 treewide: rework code to get rid of fixed IPv6 address arrays 3e4c8ad config: rework code to get rid of IFNAMSIZ usage ab7813e treewide: use angle-brackets to include libubox header files Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* build: enable gzipping of images on x86 even if ext4 is disabledFelix Fietkau2017-07-062-5/+3
| | | | | | | There is lots of padding between the boot partition and the rootfs, so gzipping is helpful here Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/flex: add autoreconfJohn Crispin2017-07-061-0/+1
| | | | | | build blows up on latest debian due to automake mismatch Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: Enable AP148 fit image(.itb) generationRam Chandra Jangir2017-07-061-0/+1
| | | | | | | This change enables .itb image generation for AP148, It will help us to boot and test AP148 with NOR flash. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
* ramips: bump to v4.9John Crispin2017-07-0689-33045/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* mt76: update to the latest versionFelix Fietkau2017-07-051-3/+3
| | | | | | | | | | | | | Fixes mt7603 stablity and performance issues af32615 mt7603: change auto rate control register initialization 01fb9ba mt7603: fix control/status retries count estimation cf4ba12 mt7603: avoid tx rate sampling using no retransmissions 32eab50 mt7603: set wtbl entry vif index c4e3dea mt7603: use the real vif index in txwi header for normal tx. e90a81a mt7603: fix channel width fall back in TXWI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: flex: fix build with automake 1.15.1Jo-Philipp Wich2017-07-052-2/+3
| | | | | | | | | | | | | | | | After the update of GNU automake, the flex configure fails with configure.ac:31: error: version mismatch. This is Automake 1.15.1, configure.ac:31: but the definition used by this AM_INIT_AUTOMAKE configure.ac:31: comes from Automake 1.15. Apply the autoreconf host fixup to properly regenerate configure before to avoid triggering the version mismatch. Also refresh the patch while we're at it. Fixes FS#885. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* bzip2: add symlink to binaryDaniel Golle2017-07-051-1/+3
| | | | | | | | Other distributions incl. the OpenWrt ImageBuilder and SDK expect to find the bzip2 executable in /bin. Create a symlink at that location for compatibility. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* brcm63xx: remove misleading warning about partial SPI NOR writesJonas Gorski2017-07-051-0/+33
| | | | | | | | The warning will be triggered by jffs2 or UBI, and partial writes are no issue for most flash chips. Fixes: 2a2b16210bbc ("brcm63xx: backport upstream solution for SPI message size limits") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 05:17:24 +0000