aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* OpenWrt v19.07.0: adjust config defaultsv19.07.0Hauke Mehrtens2020-01-065-9/+11
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: Fix sysupgrade for Xiaomi mir3gHauke Mehrtens2020-01-061-3/+4
| | | | | | | | | | | | | | | | | | | This mostly reverts the original commit e9929ebeeaef ("ramips: Fix sysupgrade for Xiaomi mir3g") and replaces it with setting the BOARD_NAME to the old value. This way the folder in the tar will be named sysupgrade-mir3g and not sysupgrade-xiaomi_mir3g and the sysupgrade in OpenWrt 18.06 can find it. Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: Fix potential dnsmasq crash with TCPHauke Mehrtens2020-01-062-1/+36
| | | | | | | | | | | | | | | | This is a backport from the dnsmasq master which should fix a bug which could cause a crash in dnsmasq. I saw the following crashes in my log: [522413.117215] do_page_fault(): sending SIGSEGV to dnsmasq for invalid read access from 2a001450 [522413.124464] epc = 004197f1 in dnsmasq[400000+23000] [522413.129459] ra = 004197ef in dnsmasq[400000+23000] This is happening in blockdata_write() when block->next is dereferenced, but I am not sure if this is related to this problem or if this is a different problem. I am unable to reproduce this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 414d0541381d432e69190f394dfe2a6e8122d6bb)
* x86: fix missing led variable warning during bootPetr Štetiar2020-01-061-0/+2
| | | | | | | | | Fixes following warning during the boot: WARNING: Variable 'led' does not exist or is not an array/object Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 5816caad26ae294f0adb4ed07ed53dcba7277c33)
* ca-certificates: provide ca-certs by both ca-certificates and ca-bundleMaxim Storchak2020-01-051-2/+4
| | | | | | | | | | - both packages provide ca-certs - make ca-bundle the default provider This should allow easy transition between these two forms of CA certificates storage Signed-off-by: Maxim Storchak <m.storchak@gmail.com> (cherry picked from commit dd299805ad18472a8245b4524a25e4381e166057)
* ramips: Fix sysupgrade for Xiaomi mir3gHauke Mehrtens2020-01-051-3/+3
| | | | | | | | | | | | | | | | | Without this change sysupgrade from 18.06 to 19.07 is only possible with the -F option. In OpenWrt 18.06 the nand_do_platform_check() function is called with the board name mir3g only, if the tar does not use mir3g it will fail. OpenWrt 19.07 and later support the metadata with the supported_devices attribute to allow renaming. Do the renaming of the target between 19.07 and master like it is done for some other boards. I tested the following sysupgrades successfully without -F 18.06 -> 19.07 19.07 -> master master -> 19.07 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: remove duplicate dts nodes of MediaTek LinkIt Smart 7688Jack Chen2020-01-051-4/+0
| | | | | | | | There are two identical wmac nodes in the dts file of MediaTek LinkIt Smart 7688, so delete one of them. Signed-off-by: Jack Chen <redchenjs@live.com> (cherry picked from commit 4be271a4867dcf57a122eeb7b42407e7a506915e)
* package: remove accidentally added symlinkPetr Štetiar2020-01-051-1/+0
| | | | | | | | In the commit f3439c401900 ("procd: update to version 2020-01-04") I've somehow managed to add local testing symlink to the uledd package, so removing it now. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* fstools: update to latest Git HEADJo-Philipp Wich2020-01-051-3/+3
| | | | | | | 823faa0 block: re-discover mtd devices on extroot mount retry Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 22a178e89282c7bd5bb181fc5c2c5cb6ff2403c8)
* procd: update to version 2020-01-04Petr Štetiar2020-01-052-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: a5af33ce9a16 instance: strdup string attributes d2e8bf6ef7cf system: watchdog_set: fix misleading indentation 9814807bd71c system: sysupgrade: fix possibly misleading error c7a2db3c1eb6 system: sysupgrade: rework firmware validation ea45c4a0f07c system: fix failing image validation due to EINTR 4fde95506243 cmake: fix lookup of external libraries 5ed190aae1b3 jail: remove accidentally added lines 52c5c1980ba3 jail: set user and group inside jail 3aa051b44177 system: sysupgrade: close input side of pipe before reading f47622e89c4d instance: Warn about unexpected number of parameters 564ecdfd9cc4 instance: ujail: Fix allocated size for no_new_privs parameter 7fb2e1dfa221 procd: simplify code in procd_inittab_run 4a127c3c60af procd: replace exit(-1) with exit(EXIT_FAILURE) bc0a73eaad58 procd: add upgraded binary to .gitignore ba4c4dbbbd65 procd: add start-console support 3e39fe539490 procd: shift arguments for askfirst only once 5d6282906baf procd: skip respawn in case device disappeared d27949f12fd7 procd: guard fork_worker calls 258aa04328a2 procd: Add cached and available to memory table 8e9fb51fa66e procd: Switch to nanosleep c844ace9729a system: Fix possible integer overflows Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ubus: update to version 2019-12-27Petr Štetiar2020-01-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: 041c9d1c052b ubusd/libubus-io: fix socket descriptor passing 8f2292478c57 ci: enable unit testing a1523d76b016 fix blob parsing vulnerability by using blob_parse_untrusted c60583743ccf ubus_monitor: workaround possibly false positive uses of memory after it is freed dac6c7c575ac ubusd_monitor: fix possible null pointer dereference 060dfbb26da3 ubus_common: remove duplicate ARRAY_SIZE and add missing include c5f2053dfcfd workaround possibly false positive uses of memory after it is freed 72be8e93f07d lua: ubus_lua_do_subscribe: fix copy&paste error a995b1e68129 lua: workaround false positive dereference of null pointer 08f17c87a000 add fuzzer and cram based unit tests c413be9b376c refactor ubusd.c into reusable ubusd_library afd47189e864 examples: remove dead increments b2e544238672 add initial GitLab CI support 058f4e9526ed libubus: fix incompatible pointer types assigment d2e026a33df8 iron out all extra compiler warnings 5d7ca8309d0a ubusd/libubus-io: fix variable sized struct position warning d61282db5640 ubusd: fix comparison of integers of different signs 90fb16234c22 cmake: enable extra compiler checks 2e051f628996 ubus: Support static builds 588baa3cd784 ubusd: retry sending messages on EINTR 76ea27a62774 libubus: attempt to receive data before calling poll 4daab27d004f libubus: do not abort recv_retry before completing a message and bumps ABI_VERSION to 20191227. Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libubox: update to version 2019-12-28Petr Štetiar2020-01-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Contains following changes: cd75136b1342 blobmsg: fix wrong payload len passed from blobmsg_check_array eb7eb6393d47 blobmsg: fix array out of bounds GCC 10 warning 86f6a5b8d1f1 blobmsg: reuse blobmsg_namelen in blobmsg_data 586ce031eaa0 tests: fuzz: fuzz _len variants of checking methods b0e21553ae8c blobmsg: add _len variants for all attribute checking methods cd3059796a57 Replace use of blobmsg_check_attr by blobmsg_check_attr_len 143303149c8b Ensure blob_attr length check does not perform out of bounds reads f2b2ee441adb blobmsg: fix heap buffer overflow in blobmsg_parse 4dfd24ed88c4 blobmsg: make blobmsg_len and blobmsg_data_len return unsigned value 2df6d35e3299 tests: add test cases for blobmsg parsing 8a34788b46c4 test: fuzz: add blobmsg_check_attr crashes 478597b9f9ae blob: fix OOB access in blob_check_type 325418a7a3c0 tests: use blob_parse_untrusted variant 0b24e24b93e1 blob: introduce blob_parse_untrusted 6d27336e4a8b blob: refactor attr parsing into separate function 833d25797b16 test: fuzz: add blob_parse crashes 09ee90f8d6ed tests: add test cases for blob parsing 436d6363a10b tests: add libFuzzer based tests bf680707acfd tests: add unit tests covered with Clang sanitizers f804578847de cmake: add more hardening compiler flags 46f8268b4b5b blobmsg/ulog: fix format string compiler warnings eb216a952407 cmake: use extra compiler warnings only on gcc6+ 07413cce72e1 tests: jshn: add more test cases 26586dae43a8 jshn: fix missing usage for -p and -o arguments 8e832a771d3a jshn: fix off by one in jshn_parse_file cb698e35409b jshn: jshn_parse: fix leaks of memory pointed to by 'obj' c42f11cc7c0f jshn: main: fix leak of memory pointed to by 'vars' 93848ec96dc5 jshn: refactor main into smaller pieces 9b6ede0e5312 avl: guard against theoretical null pointer dereference c008294a8323 blobmsg_json: fix possible uninitialized struct member 0003ea9c45cc base64: fix possible null pointer dereference 8baeeea1f52d add assert.h component b0a5cd8a28bf add cram based unit tests 1fefb7c4d7f9 add initial GitLab CI support c955464d7a9b enable extra compiler checks 6228df9de91d iron out all extra compiler warnings and bumps ABI_VERSION to 20191228. Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* base-files: sysupgrade: exit if the firmware download failedPetr Štetiar2020-01-052-2/+2
| | | | | | | | | | Sysupgrade process shouldn't continue if the firmware image couldn't be downloaded. Ref: http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020940.html Reported-by: Petr Novák <petrn@me.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit cf3da66d2ce11a30ae2993b56276ade10c9bddb9)
* base-files: upgrade: add case to export_bootdeviceKlaus Kudielka2020-01-051-1/+13
| | | | | | | | | | | | | | The factory uboot of the Turris Omnia boots with "root=b301", and we instruct new users to sysupgrade from there (e.g. method 1, step 7). Currently, this will fail with "Unable to determine upgrade device". Add a new case to export_bootdevice, which parses the hex argument. Ref: https://github.com/openwrt/openwrt/pull/2340#issuecomment-561317688 Fixes: 2e5a0b81ec29 ("mvebu: sysupgrade: sdcard: keep user added partitons") Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 3a4f587c465a0531b820ca1a3e90eb05c4927b68)
* sunxi: Turn on CONFIG_PINCTRL_SUN4I_A10 for A20Florian Fainelli2020-01-051-1/+1
| | | | | | | | | | | CONFIG_PINCTRL_SUN4I_A10 controls both the A10 and the A20 enablong of the pinctrl driver, this is necessary since upstream commit 5d8d349618a9464714c07414c5888bfd9416638f ("pinctrl: sunxi: add A20 support to A10 driver") which has been included in v4.13 and onwards. Fixes: ad2b3bf310f7 ("sunxi: Add support for kernel 4.14") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> (cherry picked from commit 32e4eaef1b4c2a7fa44787813fdf715b2ba500d9)
* wolfssl: bump to 4.3.0-stableEneas U de Queiroz2020-01-041-3/+3
| | | | | | | | This update fixes many bugs, and six security vulnerabilities, including CVE-2019-18840. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com> (cherry picked from commit d5ede68f8b67f8fa2b4102b90e5dd3722172299a)
* kernel: bump 4.14 to 4.14.162Hauke Mehrtens2020-01-0410-25/+25
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.161Hauke Mehrtens2020-01-0432-134/+134
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, ramips Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest openwrt-19.07 versionDavid Bauer2020-01-041-3/+3
| | | | | | 8a78567 mt76: fix compilation warning in mt76_eeprom_override() Signed-off-by: David Bauer <mail@david-bauer.net>
* mt76: fix incorrect firmware pathDavid Bauer2020-01-041-2/+2
| | | | | | | | | | | | | The mt76 driver does load the firmware for the MT7615 chip from /lib/firmware/mediatek instead of /lib/firmware. The driver loads the firmware from this path since mt76 commit ea3ab68c7589 ("mt76: mt7615: fix mt7615 firmware path definitions"). Fixes: a2e2c40b5ebd ("mt76: update to the latest openwrt-19.07 version") Reported-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Stijn Segers <foss@volatilesystems.org>
* ramips: fix Archer C20i wireless MAC addressDavid Bauer2020-01-031-0/+3
| | | | | | | | | | | The TP-Link Archer C20i previously had a generic Ralink MAC address set for both radios, as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for both radios to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 3b013dcdf8d8aa0e3601e3aac30342318025e32a)
* ramips: fix Archer C2 v1 5GHz MAC addressDavid Bauer2020-01-031-0/+2
| | | | | | | | | | | | The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set for the 5GHz radio (MT7610), as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for the 5GHz radio to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit dcc923a4c45b48fcbef4f3964f74fbcaabad335e)
* ramips: add system LED indicators for TP-Link C20iDavid Bauer2020-01-031-1/+8
| | | | | | | | Use the WPS LED to indicate system status like it is done for the TP-Link Archer C2 v1 and many other boards. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit a272fafc9c507820cc62aa12464588bac45f250a)
* ramips: convert TP-Link MT7620 boards to tpt triggerDavid Bauer2020-01-036-5/+7
| | | | | | | | | | | | | This converts all MediaTek MT7620 boards from TP-Link to use the now supported WiFi throughput LED trigger. This way, the LED state now covers all VAPs regardless of their name. Also align all single-WiFi LEDs to represent the state of the 2.4GHz radio. This was not always the case previously, as later-added support for the MT7610 altered the phy probing order. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1e7c6381f0058e49caab8de54eaad4862732f95d)
* mt76: update to the latest openwrt-19.07 versionDavid Bauer2020-01-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 330e832 mt76: mt76x0: fix default mac address overwrite f97c33e mt76: mt7603: fix input validation issues for powersave-filtered frames 875f6d7 mt76: mt7615: increase MCU command timeout abd7d86 mt76: clear skb pointers from rx aggregation reorder buffer during cleanup 96c7b07 mt76: eeprom: add support for big endian eeprom partition 19c8e20 mt76: fix possible undetected invalid MAC address df64c56 mt76: Off by one in mt76_calc_rx_airtime() 1702b24 mt76: mt7603: reset STA_CCA counter setting the channel 383a631 mt76: mt76x0u: do not reset radio on resume 2dcfbdd mt76: disable bh in mt76_dma_rx_poll 947d20d mt76: fix rx dma ring descriptor state on reset f3348f5 mt7615: replace sta_state callback with sta_add/sta_remove faf5e6f mt76: mt7615: read {tx,rx} mask from eeprom db78ee0 mt76: move mt76_get_antenna in mt76_core module 7121e16 mt76: fix possible out-of-bound access in mt7615_fill_txs/mt7603_fill_txs 5dfb0ec mt76: mt7615: disable radar pattern detector during scanning e2f90ad mt76: move interface_modes definition in mt76_core module cfdb751 mt76: mt7615: add ibss support e0731a8 mt76: move SUPPORTS_REORDERING_BUFFER hw property in mt76_register_device a85c06c mt76: use mt76_dev in mt76_is_{mmio,usb} ea19cd7 mt76: Remove set but not used variable 'idx' 3cbaf81 mt76: mt76u: rely on a dedicated stats workqueue 20f0589 mt76: mt76u: rely on usb_interface instead of usb_dev f2be00b mt76: dma: fix buffer unmap with non-linear skbs c14d656 mt76: mt76x2e: disable pcie_aspm by default 58e1e96 mt76: mt7615: remove unneeded semicolon c93a2d1 mt76: mt76x02u: update ewma pkt len in mt76x02u_tx_prepare_skb 1987b74 mt76: mt76x0: remove 350ms delay in mt76x0_phy_calibrate 50b1e9b mt76: refactor cc_lock locking scheme d868638 mt76: remove obsolete .add_buf() from struct mt76_queue_ops dc14ac6 mt7615: remove vif sta from poll list on interface remove 2a0a191 mt7603: remove vif sta from poll list on interface remove d3a5895 mt76: fix a-mpdu boundary detection issue for airtime reporting 391e148 mt76: add sanity check for a-mpdu rx wcid index 01642d8 mt76: mt76x02: fix use-after-free in tx status code handling airtime c11a4ad mt76: mt76x0: eeprom: add support for MAC address from OF d94cc81 mt76: drop rcu read lock in mt76_rx_aggr_stop 7d8764d mt76: avoid enabling interrupt if NAPI poll is still pending 5b02a07 mt76: add missing locking around ampdu action 71c2ef0 mt76: fix aggregation stop issue 6f7d0f5 mt76: fix use-after-free bug in airtime fairness code 8f22de0 mt76: do not use devm API for led classdev e7199f9 mt76: enable airtime fairness 81f2be0 mt76: mt7615: track tx/rx airtime for airtime fairness 2579122 mt76: mt7615: introduce mt7615_mac_wtbl_update routine d91f7c1 mt76: mt7615: fix survey channel busy time 028071d mt76: mt7615: report tx_time, bss_rx and busy time to mac80211 0e5050e mt76: mt76x02: track approximate tx airtime for airtime fairness and survey 3429cc7 mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset de118bb mt76: unify channel survey update code fdf0163 mt76: mt7603: switch to a different counter for survey busy time ee31030 mt76: mt7603: track tx airtime for airtime fairness and survey f34b1ae mt76: track rx airtime for airtime fairness and survey a1d6891 mt76: store current channel survey_state in struct mt76_dev b042987 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4 2027763 mt76: report rx a-mpdu subframe status 1ddcadb mt76: mt7603: remove q_rx field from struct mt7603_dev ea3ab68 mt76: mt7615: fix mt7615 firmware path definitions 081926a mt76: mt7603: collect aggregation stats 696c0fc mt76: mt7615: collect aggregation stats 23e8aed mt76: move aggr_stats array in mt76_dev 1118b5e mt76: mt7615: add queue entry in debugfs fbc59e6 mt76: move queue debugfs entry to driver specific code 0b01ace mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module c394887 mt76: mt76x0u: reset counter starting the device 0355b7a mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start f3792b5 mt76: mt76x02: move mac_reset_counter in mt76x02_lib module 63e8152 mt76: mt7615: enable SCS by default b140512 mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller a20c20b mt76: usb: add lockdep_assert_held in __mt76u_vendor_request 0308d75 mt76: remove empty flag in mt76_txq_schedule_list 0efbc5d mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown 9c5df3c mt76: remove aggr_work field from struct mt76_wcid 8739f87 mt76: mt7615: fix control frame rx in monitor mode e07407a mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y c7f8214 mt76: mt7615: add support to read temperature from mcu 6797378 mt76: mt7615: introduce mt7615_txwi_to_txp utility routine 496c78e mt76: mt76x0: remove unneeded return value on set channel 1d2acd5 mt76: mt76x0: remove redundant chandef copy 0167bfa mt76: make mt76_rx_convert static Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: fix inverted reset button for Ravpower WD03Moritz Warning2020-01-031-1/+1
| | | | | | | The button events "pressed" and "released" were switched. Tested with v18.06.4. Signed-off-by: Moritz Warning <moritzwarning@web.de> (cherry picked from commit 3e1325b219fced91f01d5594503f61d326a93b90)
* ramips: add LED trigger for TL-WR902AC v3 WAN LEDDavid Bauer2019-12-301-0/+1
| | | | | | | | | | | | This adds an LED trigger for the WAN LED on top of the TP-Link TL-WR902AC v3. Currently, only the LED on the port itself shows the link state, while the LED on top of the device stays dark. The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the port was labled LAN. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit c48b571ad708b9f66efb0c2942291c2d8f1d7780)
* rt2x00: add throughput LED triggerDavid Bauer2019-12-301-0/+44
| | | | | | | | | | This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Christoph Krapp <achterin@googlemail.com> (cherry picked from commit 985ec835aea100e9245baaef8ebb15628601fe5e)
* mac80211: fix build without CONFIG_PCIFelix Fietkau2019-12-291-1/+1
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit fa37dbbc43db23a0ce7256f47943f38a1dcc9027)
* mac80211: add patch to include local BSS rx time in survey informationFelix Fietkau2019-12-282-2/+79
| | | | | Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 6a3739dc42c1d9626e5784d9316c56962bd8f016)
* mac80211: add pcie apsm backport changesFelix Fietkau2019-12-282-0/+67
| | | | | | | Required for newer versions of mt76 Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit d64daf7026ce47788f12130462a3107bdab8718f)
* ramips: remove bogus ralink,mtd-eeprom with offset 0x4Adrian Schmutzler2019-12-286-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several devices in mt76x8 subtarget use the following line to set up wmac in their DTS(I) files: ralink,mtd-eeprom = <&factory 0x4> This is strange for several reasons: - They should use mediatek,mtd-eeprom on this SOC - The caldata is supposed to start at 0x0 - The parent DTSI mt7628an.dtsi specifies mediatek,mtd-eeprom anyway, starting from 0x0 - The offset coincides with the default location of the MAC address in caldata Based on the comment in b28e94d4bfa1 ("ramips: MiWiFi Nano fixes"), it looks like the author for this device wanted to actually use mtd-mac-address instead of ralink,mtd-eeprom. A check on the same device revealed that actually the MAC address start at offset 4 there, so the correct caldata offset is 0x0. Based on these findings, and the fact that the expected location on this SOC is 0x0, we remove the "ralink,mtd-eeprom = <&factory 0x4>" statement from all devices in ramips (being only mt7628an anyway). Thanks to Sungbo Eo for finding and researching this. Reported-by: Sungbo Eo <mans0n@gorani.run> Fixes: b28e94d4bfa1 ("ramips: MiWiFi Nano fixes") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 09d38a3bc328d122b0d84fcf6bb53d2bce7373b6)
* ipq40xx: use ath10k-ct-smallbuffers for 128 MiB devicesPaul Fertser2019-12-261-1/+3
| | | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com> (cherry picked from commit 0b7d779dcfc57507ab1d06ce6f1052d25e9de017)
* kernel: bump 4.14 to 4.14.160Hauke Mehrtens2019-12-2511-18/+18
| | | | | | | | | Refreshed all patches. Compile-tested on: ipq40xx, ath79 Runtime-tested on: ipq40xx Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.159Koen Vandeputte2019-12-2451-281/+153
| | | | | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 302-0002-dmaengine-dw-implement-per-channel-protection-contro.patch Fixes: - CVE-2019-19332 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath79: use ath10k-ct-smallbuffers for 64 MiB devicesPaul Fertser2019-12-243-14/+14
| | | | Signed-off-by: Paul Fertser <fercerpav@gmail.com>
* ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to dependsHauke Mehrtens2019-12-241-6/+6
| | | | | | | | Only select ath10k-ct-regular when smallbuffers version was not selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 80f06cb601160534f20e61d476dcedba77d5a47d)
* kernel: ath10k-ct: provide a build variant for small RAM devicesPaul Fertser2019-12-243-1/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to many bugreports [0][1][2] the default ath10k-ct kernel module is unusable on devices with just 64 MiB RAM or with 128 MiB and dual ath10k cards. The target boards boot but eventually oom-killer starts to interfere with normal operation, so the current state is effectively broken. Since the two patches in question have a performance impact (and possibly some other unexpected side-effects) a dedicated build variant is added so that users of the low RAM devices can still benefit from all the ath10k-ct advantages. According to testing [3] results, the issue can be experienced even with "a 256MB device with three radios". Measured performance impact of implementing small buffers was lowering "the maximum 5 GHz throughput on an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for TCP transfers (download/upload) to 438/343 Mbit/s" The patches were apparently inspired by QSDK tweaks used by ODMs for the affected devices. [0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html [1] https://github.com/openwrt/openwrt/pull/1077 [2] https://bugs.openwrt.org/index.php?do=details&task_id=2664 [3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701 Signed-off-by: Paul Fertser <fercerpav@gmail.com> [Remove double CONFIG_ATH10K-CT_LEDS entry] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 1ac627024de916eb157659caf49f93fa89d3b19a)
* fstools: update to latest git HEADJo-Philipp Wich2019-12-231-3/+3
| | | | | | | | b4e25d5 libblkid-tiny: fix symbol collision with full libblkid Fixes: FS#2691, FS#2692 Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 5f4244150f99d7bf72a96ec4d9c1055386e66b53)
* fstools: update to latest git HEADRafał Miłecki2019-12-231-3/+3
| | | | | | | | | | | | | 111a43f libblkid-tiny: vfat: Change parsing label in special cases f43a1aa libblkid-tiny: vfat: Fix reading labels which starts with byte 0x05 157924d libblkid-tiny: add blkid_probe_set_id_label() stub 0c5761f libblkid-tiny: use separated buffer for each block device read b82c5c1 libblkid-tiny: add functions for allocating & freeing probe struct 12851d6 blockd: don't flush devices list on "hotplug" call 5ea47fe blockd: fix vlist memory corruption Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 4ebc9dc9c4faf8d9abc4197a74b892a66d9c1bcb)
* fstools: bump to version 2019-11-03Yousong Zhou2019-12-231-3/+3
| | | | | | | | | | | | | 2f2a09a block: mount_device: err log only when mp deviates from spec da4edc1 block: mount_device: skip extroot earlier 32c3126 block: mount_action: handle mount/umount deps fb0700f block: support hierarchical mount/umount 1212b5b block: umount: skip / unless -a is given eda8b3f block: use fsck.fat instead of dosfsck d05276d libblkid-tiny: ntfs: fix use-after-free Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry picked from commit e4af39d56395738d86daa4babb379ab605b4d277)
* fstools: update to latest Git HEADHauke Mehrtens2019-12-231-3/+3
| | | | | | | | | 4327ed4 mkdev: Avoid out of bounds read 9b3eb63 libblkid-tiny: use blkid_probe_set_utf8label for label set c9d0462 libblkid-tiny: adds blkid_probe_set_utf8label support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 541a3210707d1fc4b439ac61dc06816dcec2ab10)
* libubox: bump to version 2019-10-29Yousong Zhou2019-12-231-3/+3
| | | | | | | | It contains a single change to vlist.h header file: "vlist: add more macros for loop iteration". This is needed for newer version of fstools Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry picked from commit 51e76247762d265d4a4aac33456876b83b0cca25)
* libubox: update to latest git HEADRoman Yeryomin2019-12-231-3/+3
| | | | | | | eb30a03 libubox, jshn: add option to write output to a file Signed-off-by: Roman Yeryomin <roman@advem.lv> (cherry picked from commit c0e7ec91a0927002942631bbc995b90f5f7dd7ed)
* kernel: remove LINUX_4_9 dependency of kmod-daxSungbo Eo2019-12-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch resolves recursive dependency warning on a feed package: $ make defconfig Collecting package info: done tmp/.config-package.in:104721:error: recursive dependency detected! For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" tmp/.config-package.in:104721:symbol PACKAGE_nfs-kernel-server depends on NFS_KERNEL_SERVER_V4 For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" feeds/packages/net/nfs-kernel-server/Config.in:4:symbol NFS_KERNEL_SERVER_V4 depends on PACKAGE_nfs-kernel-server # # configuration written to .config # 19.07 branch uses kernel 4.14 only, so CONFIG_LINUX_4_9 symbol is not needed anyway. Ref: https://github.com/openwrt/packages/issues/10490 Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* scripts/dowload.pl: add archive.apache.org to apache mirror listJiri Kastner2019-12-231-0/+1
| | | | | | | | | apache mirrors holds only latest releases, to download older releases, one must use archive.apache.org to get them. Signed-off-by: Jiri Kastner <cz172638@gmail.com> (cherry picked from commit dc34c695c4faa46efc6e2367a2ba06a47caa4840)
* kernel: fix *-gpio-custom module unloadingSungbo Eo2019-12-234-6/+6
| | | | | | | | | | | | | | | | | | | | | | Unloading and reloading the modules fails, as platform_device_put() does not release resources fully. root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5 [ 196.860620] Custom GPIO-based I2C driver version 0.1.1 [ 196.871162] ------------[ cut here ]------------ [ 196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158 [ 196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0' ... [ 197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory. This patch fixes it by replacing platform_device_put() to platform_device_unregister(). Fixes: da7740853715 ("i2c-gpio-custom: minor bugfix") Fixes: 3bc81edc70e8 ("package: fix w1-gpio-custom package (closes #6770)") Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit a22b7a60d98836343c4f7b9ec0fcae68d9131522)
* cmake: Install host packages to lib instead of lib64Rosen Penev2019-12-231-0/+1
| | | | | | | | | | Several CMake packages such as log4cplus and protobuf(-c) install to lib64 instead of lib on some hosts. This completely breaks rpath linking. Override it globally to avoid fixing each package individually. Signed-off-by: Rosen Penev <rosenp@gmail.com> Tested-by: Sebastian Kemper <sebastian_ml@gmx.net> (cherry picked from commit 383abffb1179a142b4c8f86559baad5b24d391c3)
* adb: fix for SuperSpeed devicesBjørn Mork2019-12-233-2/+41
| | | | | | | | | | | | | | | The USB descriptor parsing in adb fails to detect SuperSpeed devices because of the SuperSpeed Endpoint Companion Descriptor. This cherry-picks the upstream fix for the problem. Unfortunately there never were a release with this fix before the conversion to C++, so upgrading to a newer version isn't an option. This makes adb work with SuperSpeed devices like the Sierra Wireless EM7565. Tested and verified. Signed-off-by: Bjørn Mork <bjorn@mork.no> (cherry picked from commit d034a1f4577108a465e8347d11a51dc0e5a29298)
* toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAMEJeffery To2019-12-231-0/+30
| | | | | | | | | | | | | | | | | | | This backports the patch for GCC PR target/89587 (gcc's rs6000 configuration unconditionally sets MULTIARCH_DIRNAME, even when multiarch is disabled). This currently affects apm821xx and may cause issues when cross-compiling packages, e.g. Python 3[1]. This includes patches for GCC 8 (with the changelog diff removed); this change is already included in GCC 9.2 and 7.5. [1]: https://github.com/openwrt/packages/issues/10552 Signed-off-by: Jeffery To <jeffery.to@gmail.com> [Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit c102f702e7dc976c2ad2c04c0ce4462373e62365)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 08:26:50 +0000