aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bcm53xx: rename patches modifying DTS filesRafał Miłecki2015-01-206-60/+34
| | | | | | | | | Ths will allow us to use early 3xx numbers for patches designed for sending mainline. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44057
* base-files: Use 200ms LED timing as before for the new phase preinit_regular.John Crispin2015-01-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This restores normal pre-r43715 200ms blink-period for the System LED we're all accustomed to see while our OpenWrt routers are booting. Failsafe possibility will now be signalled with a new 100ms blinking, which is easily recognizable from the normal 200ms booting. So no existing user will be scared by a new 500ms LED pattern, since such a slow pattern could easily be mistaken for something wrong... I was like "ok why my router is collapsing now, is this a bad flash, a kernel panic, or what else" when I've seen it for the first time ;) Sorry for not having explained myself better in v1 of this patch. Original: Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 200ms Failsafe entered: 50ms Now (after preinit_regular has been introduced): Preinit, failsafe is possible: 200ms Preinit, failsafe not possible anymore, booting normally: 500ms *here is the "offending" change* Failsafe entered: 50ms With my proposed patch: Preinit, failsafe is possible: 100ms *indicate this condition with a new timing, that prompts the user to press the key if they want to start failsafe* Preinit, failsafe not possible anymore, booting normally: 200ms *keep this as before* Failsafe entered: 50ms Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 44056
* ralink: add support for firewrtJohn Crispin2015-01-206-1/+116
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44055
* comgt: Allow using non-TTY devicesJohn Crispin2015-01-201-0/+68
| | | | | | | | | | | | | Some Huawei mobile broadband sticks utilizing the NCM protocol expose the control channel as a cdc-wdm device node instead of a virtual TTY. This device node does not support the terminal ioctls. This patch adds a check whether the provided device is a TTY or not and does not attempt to use the terminal ioctls if they are not supported. v2: reduce diffstat by simplifying code a little Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 44054
* uclient: update to the latest version with timeout supportRafał Miłecki2015-01-191-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44053
* libubox: update to the latest commit with JSON and usock fixesRafał Miłecki2015-01-191-2/+2
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44052
* bcm53xx: add support/firmware for Asus RT-AC87URafał Miłecki2015-01-193-0/+157
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44051
* netifd: add option to customize IPv6 interface identifiers (thx Hans Dedecker)Steven Barth2015-01-191-2/+2
| | | | | | Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 44050
* packages: uboot-sunxi: uEnv is used as a script rather than default envZoltan Herpai2015-01-191-5/+6
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44048
* ralink: fix ethernet rx buffer size breakageFelix Fietkau2015-01-181-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44047
* ralink: improve check rx sg function. use check frags instead of function callFelix Fietkau2015-01-183-14/+8
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44046
* ralink: correct handle hardware rx 2bytes offsetFelix Fietkau2015-01-183-13/+25
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44045
* ralink: use fe_reset to control all resetFelix Fietkau2015-01-188-41/+28
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44044
* ralink: improve tx_timeout functionFelix Fietkau2015-01-184-15/+87
| | | | | | | | | | * use default timeout value * print more debug ring info * move timeout reset function to workqueue Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44043
* ralink: add ethernet fe and esw reset control bitFelix Fietkau2015-01-189-0/+44
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44042
* ralink: reduce access to uncached tx/rx dma ring bufferFelix Fietkau2015-01-184-53/+81
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44041
* sunxi: update Olimex A13 SOM profileZoltan Herpai2015-01-182-5/+5
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44040
* packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunkZoltan Herpai2015-01-182-2/+73
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44039
* packages: uboot-sunxi: remove unused Hackberry targetZoltan Herpai2015-01-181-5/+0
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44038
* uboot-envtools: fix Linksys EA3500 env sizeLuka Perkov2015-01-181-1/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44037
* kirkwood: enable switch on Linksys EA3500Luka Perkov2015-01-183-2/+27
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44036
* packages: update uboot-sunxi to 2015.01Zoltan Herpai2015-01-182-25008/+4
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44035
* kernel: add missing config symbol for 3.18Zoltan Herpai2015-01-181-0/+1
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44034
* mac80211: add throughput trigger to ath10kJohn Crispin2015-01-181-0/+37
| | | | | | | | add a led trigger to ath10k based on the ath9k code Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> SVN-Revision: 44033
* lantiq: DGN3500 cleanupsJohn Crispin2015-01-182-3/+1
| | | | | | | | | This patch builds on the previous three to streamline support for the Netgear DGN3500. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44032
* lantiq: Restore call to orphaned etop functionJohn Crispin2015-01-181-16/+44
| | | | | | | | | It seems the call to ltq_get_eth_mac() disappeared at some point. This patch puts it where it currently most makes sense. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44031
* kernel: preserve bootloader command line on MIPSJohn Crispin2015-01-182-6/+38
| | | | | | | | | | | Somewhere in the conversion of the MIPS architecture code to Device Tree usage, there's been a failure to keep the separate variables holding the kernel command line reconciled between the tree and the bootloader. This patch restores previous functionality that broke. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44030
* lantiq: Fix initscript issueJohn Crispin2015-01-181-1/+1
| | | | | | | | | Currently this initscript fails if the macaddr has any leading zeroes. This patch corrects the problem. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> SVN-Revision: 44029
* ramips: downgrade mt7621 "Spurious GIC Interrupt" to debug messagesFelix Fietkau2015-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44028
* ramips: add mt7621 cpu feature overridesFelix Fietkau2015-01-181-0/+68
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44027
* kernel: add missing config symbolFelix Fietkau2015-01-182-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44026
* ramips: refresh kernel patchesFelix Fietkau2015-01-185-31/+31
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44025
* kernel: backport upstream commit to fix MIPS cache shift with secondary ↵Felix Fietkau2015-01-184-5/+47
| | | | | | | | cache enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44024
* ar8216: display flow control info in swconfig get_link in case of ↵Felix Fietkau2015-01-182-1/+19
| | | | | | | | | | | | | | | | | | autonegatiation too The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't consider the autonegotiated flow control. AR8327/AR8337 provide the info about autonegotiated rx/tx flow control in bits 10 and 11 of the port status register. Use these values to display info about autonegotiated rx/tx flow control as part of the get_link attribute. Successfully tested on TL-WDR4900 (AR8327 rev.4) and TL-WDR4300 (AR8327 rev.2). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44023
* ar8216: add 802.3az EEE info to swconfig get_link attributeFelix Fietkau2015-01-185-1/+49
| | | | | | | | | | | | | AR8327/AR8337 allow to read the result of EEE autonegotiation. If EEE is autonegotiated between the link partners, display this as part of the swconfig get_link attribute. eee100: 100MBit EEE supported by both link partners eee1000: 1GBit EEE supported by both link partners Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44022
* ar8216: introduce enable_eee swconfig attribute to control 802.3az EEE per portFelix Fietkau2015-01-184-17/+122
| | | | | | | | | | | | | | | | Users reported network issues with AR8327 which turned out to be caused by EEE not working correctly with certain link partners (ticket 14597). The workaround was to disable EEE on all ports (changeset 41577). The issue was with certain link partners only, therefore this patch allows to control usage of EEE per port via swconfig. Still the default is to initially disable EEE on all ports. Successfully tested on a TL-WDR4900 (AR8327 rev.4) Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44021
* igmpproxy: add patch to silence unnecessary logging of downstream igmp trafficFelix Fietkau2015-01-181-0/+19
| | | | | | | | | | | | | This patch adds a simple check to silence logging of messages about unrecognized igmp packets which originate from devices in local network. Without this patch igmpproxy floods openwrt syslog with messages such as: user.warn igmpproxy[19818]: The source address 192.168.1.175 for group 239.255.250.250, is not in any valid net for upstream VIF. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> SVN-Revision: 44020
* build: explicitly unexport CONFIG_SITEFelix Fietkau2015-01-181-1/+1
| | | | | | | | | | | | | | | On systems with CONFIG_SITE in the environment (e.g. OpenSUSE) make will export the CONFIG_SITE set in include/package.mk by default. This will cause host builds to get the target site configuration, leading to all kinds of weirdness (wrong pointer size, wrong endianess). Fix this by explicitly unexporting CONFIG_SITE. The explicit export for the target builds overrides the unexport, so the target builds will still correctly get the site config. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44019
* build: allow changing kernel name in new image codeFelix Fietkau2015-01-181-2/+3
| | | | | | | | | Necessary for targets using zImage or other kernel image types. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44018
* ramips: add missing copyright info for relocate stubFelix Fietkau2015-01-172-2/+8
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44017
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-176-3/+157
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016
* build: allow passing parameters to padjffs2 via the pad-rootfs commandFelix Fietkau2015-01-171-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44015
* ramips: add code for relocating a kernel to the right placeFelix Fietkau2015-01-175-0/+365
| | | | | | | | (used if the boot loader wants a different loadaddr/entry) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44014
* ramips: enable the seama mtdsplit parserFelix Fietkau2015-01-171-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44013
* build: add image makefile helper function for pading with an offsetFelix Fietkau2015-01-171-0/+11
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44012
* brcm2708: missing symbols caused a build failJohn Crispin2015-01-171-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44011
* ramips: register mt76 device tree info for WSR-1166DHPFelix Fietkau2015-01-171-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44010
* ramips: register mt7621 pcie through device treeFelix Fietkau2015-01-172-27/+98
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44009
* ralink: sync mt7621 pcie driver with latest SDKJohn Crispin2015-01-171-25/+19
| | | | | | | | fixes newer ECO versions and a hang on reboot bug Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44008
* target: kirkwood: fix leds defaults configJohn Crispin2015-01-171-11/+11
| | | | | | | | Fix missing parameters in 01_leds Signed-off-by: Gerald Kerma <dreagle@doukki.net> SVN-Revision: 44007
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 07:28:11 +0000