aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* build: copy contents of 'src' folder to build dirs (if present)Alexandru Ardelean2016-10-152-0/+2
| | | | | | | | | | | | | | | | | | | | | The normal Prepare step for a build is unpack, apply patches. But for certain packages, patches contain whole files, which would be nice to have separately and copied over as a last step in the Prepare phase. We need it for some other packages + patches, but I think the 'hostapd' package can be used as a test for this. As a quick note: the reason the condition is being evaluated as `[ ! -d ./src/ ] || $(CP) ./src/* $(HOST_BUILD_DIR)` and not with `[ -d ./src/ ] && $(CP) ./src/* $(HOST_BUILD_DIR)` is that the latter would translate in a build failure if the `src` folder is not present (the exit code would be 1). The first one, succeeds for both cases (if `src` present or not). Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* busybox: prevent globbing, word splittingJan-Tarek Butt2016-10-151-2/+2
| | | | | | Double quote to prevent globbing and word splitting. Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
* uboot-ar71xx: make reproducibleDirk Neukirchen2016-10-153-8/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | OpenWrt uses ancient u-boot thats not reproducible. There are multiple upstream changes that introduce reproducible builds like: 859e92b775fd8ebcfacc591eaf621b677c95b6f7 (not used here - the CMD_DATE/TIMESTAMP functionality seems to be disabled by config) 70d39f57146a6cb94736db39c770c3d95e07bedb f3f431a712729a1af94d01bd1bfde17a252ff02c 2d9efa1227262249d381ed5d9d341cbdba76e62d Instead of changing the Makefile too much this changeset just tries to use the changes in Makefile from current upstream git f5fd45f *Should* fix issue reported by reproducible lede page: https://tests.reproducible-builds.org/lede/lede.html Compile tested only (verified w. hexdump & md5sum) Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* build: fix cleaning configured stamp fileYousong Zhou2016-10-151-1/+1
| | | | | | | | | | | | | | We have packages with their own parts appended to standard STAMP_CONFIGURED (mostly with an underscore character). This will render the current STAMP_CONFIGURED_WILD setting invalid and the build system may miss a rebuild on config change 1. Build with config A 2. Build with config B, yet .configured_A_xx did not get cleaned 3. Return to config A, but rebuild will not happen because stamp file of config A still exists Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts: case insensitive sort device namesKarl Palsson2016-10-151-2/+6
| | | | | | | | | | | | When selecting devices from the Target Devices menu, the brand choices of naming makes it confusing to find particular devices by name, as the sorting is case sensitve. AirTight came after ALFA, and devolo and jjPlus both came after Zyxel. This does _not_ apply to the Target Profile list, as that includes "Default - all profiles" inside the profile list. Signed-off-by: Karl Palsson <karlp@etactica.com>
* scripts: add help text for some generated KConfigsKarl Palsson2016-10-151-0/+17
| | | | | | | TARGET_MULTI_PROFILE and TARGET_PER_DEVICE_ROOTFS get some help text to try and clarify their behaviour. Signed-off-by: Karl Palsson <karlp@etactica.com>
* ramips: add support for Planex VR500.YuheiOKAWA2016-10-157-1/+112
| | | | | | | | | | | | SOC: MT7621A RAM: 256MiB NOR: MX25L51245G Non Wireless Router. Issue: soft reboot problem. SPI Flash do not exit 4byte address mode. Signed-off-by: Yuhei Okawa <tochiro.srchack@gmail.com>
* ltq-ptm: Support 1508-byte MTU for RFC4638David Woodhouse2016-10-152-2/+22
| | | | | | | | | | Tested with VDSL on TP-Link WD8970, I see full 1500-byte PPP data frames, which end up being 1526 byte Ethernet frames (including Ethernet+VLAN headers) on the wire. Fixes: FS#210 Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* scripts: fix build warning when overriding packagesZefir Kurtisi2016-10-151-1/+1
| | | | | | | | | | | | | If core packages are overridden, CONFIG_OVERRIDE_PKGS is set based on the scan order of packages, which eventually causes that config value to be modified on each build and with that causes the build process to warn for configuration being out of sync. This commit changes the CONFIG_OVERRIDE_PKGS to be sorted and prevents that false warning. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
* imx6: inittab: Use login.sh wrapper so we can configure console passwordPetr Štetiar2016-10-151-2/+2
| | | | | | | | In dc92917 there was introduced login.sh wrapper which allows configuration of console passwords via UCI system ttylogin config option. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* target/imagebuilder: Switch to xz compression instead of bz2Daniel Engberg2016-10-151-4/+4
| | | | | | | Switch to xz compression instead of using bz2. Saves about 20% of total size (ar71xx) Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libreadline: Update to 7.0Daniel Engberg2016-10-151-4/+4
| | | | | | Update libreadline to 7.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libconfig: Update to 1.5Daniel Engberg2016-10-151-2/+2
| | | | | | Update libconfig to 1.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/utils/e2fsprogs: Update to 1.43.3Daniel Engberg2016-10-151-3/+3
| | | | | | Updates e2fsprogs to 1.43.3 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/libressl: Update to 2.5.0 and use mirrorsDaniel Engberg2016-10-151-3/+5
| | | | | | Updates LibreSSL to 2.5.0 and switches from main site to mirrors as primary source. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libnftnl: Update to 1.0.6Daniel Engberg2016-10-151-3/+3
| | | | | | Update libnftnl to 1.0.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/network/services/lldpd: Update to 0.9.5Daniel Engberg2016-10-151-2/+2
| | | | | | Updates lldpd to 0.9.5 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libtool: Switch to xz tarballDaniel Engberg2016-10-151-2/+2
| | | | | | Switch to xz tarball, there's no point pulling two different tarballs of the same source code (tools/libtool uses xz). Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/nettle: Update to 3.3Daniel Engberg2016-10-151-2/+2
| | | | | | Update to 3.3 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libnl: Update to 3.2.28Daniel Engberg2016-10-152-16/+3
| | | | | | | Update to 3.2.28 Remove patch as its in upstream Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/libs/libmnl: Update to 1.0.4Daniel Engberg2016-10-152-419/+3
| | | | | | | * Update to 1.0.4 * Remove patch as it's upstreamed Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* packages/network/utils/wpan-tools: Update to 0.7Daniel Engberg2016-10-151-3/+3
| | | | | | | * Updates to 0.7 * Switches tarball to xz Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* package/network/utils/ipset: Update to 6.29Daniel Engberg2016-10-151-2/+2
| | | | | | Updates to 6.29 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* usbutils: Switch to xz tarball, update db to 2016-07-21Daniel Engberg2016-10-151-6/+6
| | | | | | | Switch to xz tarball Update USB ID-database to snapshot 2016-07-21 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mtd: fix up error messagesJohn Crispin2016-10-152-2/+2
| | | | | | remove the "Error fixing up TRX header" message which is misleading. Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: add support for the Airtight C-60Christian Lamparter2016-10-1513-14/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* generic: ar8216: improve ar8xxx_is_possible checkChristian Lamparter2016-10-151-6/+6
| | | | | | | | | | | | | | | | | The commit "generic: ar8216: add sanity check to ar8216_probe" (774da6c7a40320a320b28d71291c0e61fcf7bc8a) stated that PHY IDs should be checked at address 0-4. However, the PHY 4 was never check by the loop. This patch extends the check to be similar to the Atheors SDK. It tries all 4 ports and skips unconnected PHYs if necessary. If it cannot find any familiar PHYs, it will prevent the phy driver from initializing. This patch is necessary for the C-60. It doesn't have a PHY at port 3, so this caused the check in ar8xxx_is_possible to fail. As a result, the ethernet ports on the C-60 didn't work. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: C2600: change leds colour nameHenryk Heisig2016-10-152-13/+12
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* ipq806x: add support for indicating the boot and upgrade state using four ledsHenryk Heisig2016-10-155-15/+54
| | | | Signed-off-by: Henryk Heisig hyniu@o2.pl
* lantiq: use wpad-mini for WBMR boardsMathias Kresin2016-10-152-20/+2
| | | | | | | | | | The WBMR boards are the only ones in the whole tree selecting the wpad and hostapd-utils package by default. Remove the wps uci-default script as well, there is no obvious reason why the wps config need to be set only for this board. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix ARV452CQW keysMathias Kresin2016-10-151-1/+1
| | | | | | Fix the typo in the gpio-keys-polled compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use rfkill for wps button on wlan only boardsMathias Kresin2016-10-157-29/+8
| | | | | | | | | | | | | All of the touched boards don't have an ethernet port. Allow to use the wps button on these boards to enable the wireless radio after boot. The force enabled wireless for the DCH-M225 is removed. It is reckless to bring up an unencrypted wireless network by default these days. Using the wps button to bring up the radio seam to me the better approach. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use rootfs splitter and new image build code for BR-6475NDMathias Kresin2016-10-152-43/+11
| | | | | | | Use the edimax uImage splitter instead of the fixed size rootfs partition. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: move edimax images to the new build codeMathias Kresin2016-10-153-32/+37
| | | | | | | | | | | | | | | | Images installed via TFTP recovery or the Edimax webinterface of the 3g-6200n(l) are writting with the edimax header to flash. Use only one image type for these boards. The migration to the factory only images need to be done via TFTP recovery. Use the same start address for the 3g-6200n(l) factory images as the stock firmware images. Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl and the patient testing of all changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: mtdsplit_uimage: fix Edimax parserMathias Kresin2016-10-151-13/+7
| | | | | | | | | | | | | | According to the author the code was added to in preparation for adding support for a new board. The patch for the board was never send and the code never really tested. The edimax header starting with the edimax magic is put in front of the uImage header. There is no special uImage header used. Means, default magic and the type field is set to kernel as usual. Signed-off-by: Mathias Kresin <dev@kresin.me> edimax parser fix
* kernel: mtdsplit_uimage: fix rootfs offsetMathias Kresin2016-10-151-1/+1
| | | | | | | | The return value of the find_header function need to be added to the uimage_size, otherwise mtd_find_rootfs_from() might search for a rootfs within a custom header and fails. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: improve edimax 6200n/nl supportMathias Kresin2016-10-154-12/+20
| | | | | | | | | | Assign the reset functionality to the wps/reset buttons. Use the wlan switch of the 6200n to enable/disable wlan. Add the internet led of the 6200nl and use the led for boot status indication Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix edimax 6200nl switch configMathias Kresin2016-10-152-2/+1
| | | | | | | | | | | | | With 3a9752bbd2bc00e407b5dcad21789720f40abf0e and later changes to ramips_set_preinit_iface() the default vlan config applied during preinit was changed. These changes were made without updating the default network config to ensure that vlan interfaces used for lan/wan are still configured. Fix the issue by using the default all LAN portmap and disabling not connected switch ports using portdisable device tree parameter. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: tag the CPU switch portMathias Kresin2016-10-151-1/+1
| | | | | | | | | | | | With de5102651501e51c036f88fe9c4dbf6974e5158a the explicit tagging of the CPU port was removed. This leads to a not working default network config, with vlans enabled but disabled CPU tagging, for boards where all switch ports are having the same role. In case the ports are having different roles set, tagging is is set implicit for the CPU port by ucidef_add_switch(). Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: remove fixed lan/wan interface for switch configsMathias Kresin2016-10-151-1/+0
| | | | | | | | | | Don't set the lan/wan interface when using ucidef_add_switch. This results into a wan interface albeit all ports a annotated as lan ports. ucidef_add_switch takes care of setting the correct lan/wan interface according to the annotation of the ports. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mbedtls: enable NIST curves optimisation.Kevin Darbyshire-Bryant2016-10-131-9/+0
| | | | | | | | | | | | | luci using ustream-mbedtls is extremely slow vs ustream-polarssl. polarssl alias mbedtls v1 is configured to use NIST prime speed optimisation, so no longer disable the default optimisation for mbedtls v2. Compile & run tested: Archer C7v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> [Jo-Philipp Wich: refresh patch to use common format] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* gettext-full: update to 0.19.8.1Dirk Neukirchen2016-10-135-10/+20
| | | | | | | | | - unify configs of host/target - disable stuff to decrease build time - disable interactive gettextize: see http://lists.busybox.net/pipermail/buildroot/2014-April/093394.html Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* autotools: use correct version for gettext FIXUPDirk Neukirchen2016-10-131-1/+1
| | | | | | | 0.19.8.1 gettext-full uses "archive-version" of 0.19.8 to replace makros, leading to breakage of PKG_FIXUP:=gettext-version Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* gettext: fix whitespaceDirk Neukirchen2016-10-131-1/+1
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* brcm2708: fix image generation with imagebuilderÁlvaro Fernández Rojas2016-10-131-1/+5
| | | | | | | COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a successful image creation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: update to wireless-testing 2016-10-08Felix Fietkau2016-10-13216-8597/+977
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* package/devel/binutils: Update to 2.27diizzyy2016-10-131-2/+2
| | | | | Updates binutils to 2.27 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* toolchain/binutils: Add binutils 2.27Daniel Engberg2016-10-137-0/+110
| | | | | | | Add binutils 2.27 to toolchain Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh patches]
* odhcpd: Upstep to git HEAD versionHans Dedecker2016-10-131-3/+3
| | | | | | | | | | | Adds per-host leasetime support Various bugfixes : -Prioritize ifname resolving via ubus -Free interface if ifindex cannot be resolved -... Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [update mirror sha256]
* build: use CXXFLAGS if definedHauke Mehrtens2016-10-133-3/+3
| | | | | | | | | | | Instead of using TARGET_CFLAGS and EXTRA_CFLAGS in cmake and scons build use the TARGET_CXXFLAGS and EXTRA_CXXFLAGS like it is done for normal make and configure. configure used TARGET_CXXFLAGS and EXTRA_CFLAGS for the CXXFLAGS. The package-default.mk sets "EXTRA_CXXFLAGS = $(EXTRA_CFLAGS)" so using EXTRA_CXXFLAGS flags should be save. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:17:13 +0000