aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: rt2x00: fix LED polarity patchGabor Juhos2013-08-051-9/+15
| | | | | | | | | | | | | | | | | | | | | | | The patch causes compiler warning ... <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom': <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] ... and runtime errors on PCI/USB devices: [ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected [ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001 [ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform [ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte [ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected [ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47 [ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 [ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37698
* mac80211: enable RT{33,35,53,55}XX chip support in rt2800usbGabor Juhos2013-08-051-1/+3
| | | | | | | | Closes #13951. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37697
* ar71xx: fix tl-wa901nd buttons codeGabor Juhos2013-08-051-2/+2
| | | | | | | | | This patch fixes the code of the buttons for TP-Link WA901ND. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37696
* ar71xx: ubnt unifi outdoor register gpio buttonGabor Juhos2013-08-051-1/+5
| | | | | | | | | This patch register the gpio buttons for the Ubiquiti UniFi Outdoor. Signed-off-by: Rocco Folino <lordzen@autistici.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37695
* x86: change /dev/console to tty to fix job controlJohn Crispin2013-08-041-0/+4
| | | | | | | | | | | | Job control is turned off because it cannot obtain controlling terminal on /dev/console, so it is impossible to do any job control operation behind real x86 device (keyboard+monitor or virtualized). This patch switches /dev/console to tty devices for ash on x86 generic target. Signed-off-by: Jiri Slachta <slachta@cesnet.cz> SVN-Revision: 37693
* mac80211: add rtlwifi driversJonas Gorski2013-08-042-1/+530
| | | | | | | | | | Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com> [jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing usb dependencies, backport upstream fixes for Kconfig issues] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37687
* imx6: sync usb chipidea with upstreamLuka Perkov2013-08-043-13/+47
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37686
* generic: make the module reloc pacth work on mips64John Crispin2013-08-041-17/+26
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37685
* octeon: add support for the octeon mips64 SoCJohn Crispin2013-08-0417-0/+8245
| | | | | | | | This is the SoC used be the ESR Lite made by ubnt.com Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37684
* imx6: remove sdma binaryLuka Perkov2013-08-042-118/+0
| | | | SVN-Revision: 37682
* busybox: rename ntp init script back to sysntpd (#13920)Jo-Philipp Wich2013-08-042-1/+1
| | | | | | Renaming the init script to ntp broke LuCI time sync functionality and collides with other ntp packages SVN-Revision: 37681
* brcm47xx: change board detection for some Asus devicesHauke Mehrtens2013-08-043-22/+34
| | | | | | | | This closes #13316 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37680
* build: process transitive dependencies after local dependenciesFelix Fietkau2013-08-041-1/+7
| | | | | | | | This improves duplicate dependency detection Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37679
* build: suppress conditional dependencies if there are unconditional ↵Felix Fietkau2013-08-041-0/+1
| | | | | | | | dependencies on the same symbol Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37678
* kernel: kmod-appletalk: fix dependenciesHauke Mehrtens2013-08-041-2/+6
| | | | | | | | | | | | | | When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are getting build as a module. kmod-appletalk depends on llc.ko and psnap.ko, but at least psnap.ko,was not packed. On most systems CONFIG_LLC will be build into the kernel so this problem does not show up. This fixes the missing dependency of kmod-appletalk on psnap.ko Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37673
* kernel: do not build FW_LOADER as a module.Hauke Mehrtens2013-08-044-4/+0
| | | | | | | | | | | | CONFIG_FW_LOADER=y is set in the generic config and our packages in packages/kernel/linux are depending on it to be compiled into the kernel. This fixes some dependency problem where kmod-r8169 misses firmware_class.ko. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37672
* ubus: update to latest versionFelix Fietkau2013-08-041-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37671
* broadcom-diag: show error message in case something goes wrong with gpio irqHauke Mehrtens2013-08-031-2/+9
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37668
* broadcom-diag: add gpio config for Asus RT-N66UHauke Mehrtens2013-08-031-0/+14
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37667
* broadcom-diag: add gpio config for Linksys E4200v1Hauke Mehrtens2013-08-031-0/+13
| | | | | | | | | GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37666
* gpio-button-hotplug: cleanup, fix compiler warningFelix Fietkau2013-08-031-4/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37665
* gpio-button-hotplug: fix active_low handling, possibly broken in r37643Felix Fietkau2013-08-031-8/+9
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37664
* imx23: add missing DTS config for lradcZoltan Herpai2013-08-031-0/+15
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37663
* imx23: add hw crypto (dcp) supportZoltan Herpai2013-08-033-0/+1008
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 37662
* kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is setHauke Mehrtens2013-08-031-2/+2
| | | | SVN-Revision: 37661
* kernel: add missing config optionsHauke Mehrtens2013-08-022-0/+4
| | | | SVN-Revision: 37660
* kernel: add missing module to video-core for kernel < 3.6Hauke Mehrtens2013-08-021-0/+8
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37659
* kernel: fix usb-chipidea compilation with kernel <= 3.9Hauke Mehrtens2013-08-021-3/+3
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37658
* kernel: add missing config optionHauke Mehrtens2013-08-021-0/+1
| | | | SVN-Revision: 37657
* kernel: add missing config optionHauke Mehrtens2013-08-024-0/+4
| | | | | | | | brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37656
* broadcom-diag: add support for the ASUS RT-N12Hauke Mehrtens2013-08-021-0/+20
| | | | | | | | | | This adds button and led info, which I determined by manually poking the gpio values. Signed-off-by: Josh Stone <cuviper@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37655
* broadcom-diag: increase version numberHauke Mehrtens2013-08-021-1/+1
| | | | | | There are some changes in there and this should be rebuild. SVN-Revision: 37654
* mac80211: backport a few upstream fixesFelix Fietkau2013-08-022-10/+206
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37653
* kernel: ocf: add missing kernel dependenciesJonas Gorski2013-08-011-0/+3
| | | | | | | | | | | | | | | | | | OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher, so let it select these through kernel config. Fixes the following build error: ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined! ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined! make[6]: *** [__modpost] Error 1 make[5]: *** [modules] Error 2 Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37652
* kernel: load libphy before tg3Hauke Mehrtens2013-08-011-1/+1
| | | | SVN-Revision: 37651
* brcm47xx: switch to kernel 3.10.4Hauke Mehrtens2013-08-011-1/+1
| | | | | | | | | This uses a new switch driver. The old ADMTEK Adm6996 switch is not supported any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37650
* brcm47xx: use lib phy when tg3 is in useHauke Mehrtens2013-08-011-0/+14
| | | | | | | | This is untested, but probably needed to make it work with the phy lib switch driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37649
* kernel: b53: use devm_gpio_request_one() to request gpioHauke Mehrtens2013-08-011-3/+4
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37648
* brcm47xx: improve detection of Linksys WRTSL54GSHauke Mehrtens2013-08-013-7/+32
| | | | | | | | This closes #13319 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37647
* brcm47xx: remove support for kernel 3.9Hauke Mehrtens2013-08-0129-3348/+0
| | | | | | This is not needed any more. SVN-Revision: 37646
* kernel: b53: add support for GPIO resetHauke Mehrtens2013-08-012-0/+43
| | | | | | | | This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37645
* brcm47xx: add function to get a gpio pin by nameHauke Mehrtens2013-08-013-3/+38
| | | | | | | | | bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based on configuration data in nvram. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37644
* gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.John Crispin2013-08-011-1/+1
| | | | | | | | | | | TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be used to swtich between 3 positions. At leat 1 button is in pressed state in any of those positions. Initialize 'last_state' as 0 (released) will cause the device to automatically enter failsafe mode on every bootup. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 37643
* gpio-button-hotplug: use gpio_button_get_value() to fetch state.John Crispin2013-08-011-4/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 37642
* gpio-button-hotplug: add inline function gpio_button_get_value().John Crispin2013-08-011-0/+9
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 37641
* ramips: add Poray IP2202 supportJohn Crispin2013-08-018-0/+121
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37640
* ramips: add Poray X8 supportJohn Crispin2013-08-018-3/+125
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37639
* ramips: add Poray X5/X6 SupportJohn Crispin2013-08-018-3/+158
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37638
* ramips: add Poray M4 4M/8M supportJohn Crispin2013-08-019-2/+222
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37637
* ramips: add Poray M3 supportJohn Crispin2013-08-018-0/+136
| | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37636
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 04:50:50 +0000