aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: Enable fadvise on older kernels.Rosen Penev2017-11-172-2/+2
| | | | | | Backport of 56342ee2bcbf9bf8918a01045471c7bb7faa1596 for older kernels. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: add support for NanoPi M1 Plus boardLuis Araneda2017-11-173-0/+340
| | | | | | | | | | | | | | | | | | | | | | | | Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mac80211: enable brcmfmac's SDIO support on sunxi targetLuis Araneda2017-11-171-0/+1
| | | | | | Needed to support some SDIO connected cards, like AMPAK modules Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: base files: add AP6212 (brcm43430) NVRAMLuis Araneda2017-11-171-0/+53
| | | | | | Used by the NanoPi M1 Plus board Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-sunxi: add NanoPi M1 Plus boardLuis Araneda2017-11-171-0/+7
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* ipq806x: ipq4019: enable usb phyRoman Yeryomin2017-11-171-1/+1
| | | | | | Run tested on ap-dk01.2-c1 Signed-off-by: Roman Yeryomin <roman@advem.lv>
* add PKG_CPE_ID ids to package and toolsAlexander Couzens2017-11-1749-0/+49
| | | | | | | | | | | CPE ids helps to tracks CVE in packages. https://cpe.mitre.org/specification/ Thanks to swalker for CPE to package mapping and keep tracking CVEs. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* kobs-ng: add header for integer definitionsSimon Wunderlich2017-11-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | My compilation failed because of missing uint.* definitions: In file included from mtd.h:33:0, from bootstream.c:35: BootControlBlocks.h:58:2: error: unknown type name 'uint8_t' uint8_t m_u8DataSetup; ^ BootControlBlocks.h:59:2: error: unknown type name 'uint8_t' uint8_t m_u8DataHold; ^ BootControlBlocks.h:60:2: error: unknown type name 'uint8_t' uint8_t m_u8AddressSetup; ^ BootControlBlocks.h:61:2: error: unknown type name 'uint8_t' uint8_t m_u8DSAMPLE_TIME; Adding the header file fixes the problem. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> [fold changes into 001-compile.patch] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: pull edgeport firmware from linux-firmware repoBjørn Mork2017-11-161-8/+1
| | | | | | | | The kernel firmware/ is going away, so pull this firmware from the linux-firmware git repo instead. No actual changes to the installed files. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* linux-firmware: add IO Edgeport USB Serial firmwareBjørn Mork2017-11-161-0/+12
| | | | | | Preparing for kernel versions without firmware. Signed-off-by: Bjørn Mork <bjorn@mork.no>
* brcm47xx: fix switch port mapping on D-Link DIR-330Antony Black2017-11-161-0/+1
| | | | | | | | D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is eth1, it's not working cus eth1 not soldered and wan port function performs 5th port of the switch. Signed-off-by: Antony Black <gtrtfm@gmail.com>
* wireguard: bump to 0.0.20171111Kevin Darbyshire-Bryant2017-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | edaad55 (tag: 0.0.20171111) version: bump snapshot 7a989b3 tools: allow for NULL keys everywhere 46f8cbc curve25519: reject deriving from NULL private keys 9b43542 tools: remove ioctl cruft f6cea8e allowedips: rename from routingtable 23f553e wg-quick: allow for tabs in keys ab9befb netlink: make sure we reserve space for NLMSG_DONE 73405c0 compat: 4.4.0 has strange ECN function 868be0c wg-quick: stat the correct enclosing folder of config file ceb11ba qemu: bump kernel version 0a8e173 receive: hoist fpu outside of receive loop bee188a qemu: more debugging f1fdd8d device: wait for all peers to be freed before destroying 2188248 qemu: check for memory leaks c77a34e netlink: plug memory leak 0ac8efd device: please lockdep a51e196 global: revert checkpatch.pl changes 65c49d7 Kconfig: remove trailing whitespace Compile-tested-for: ar71xx Run-tested-on: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mt76: update to the latest versionFelix Fietkau2017-11-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Significantly improves throughput on MT76x2, fixes some stability issues, adds LED support. Changes: 266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature 758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature e764787 Fix errors found by cppcheck a6fce8a mt7603: add LED definition registers f658dd2 mt76x2: add LED register definitions f6a021d mt76x2: Support using PCI ID as chip ID c9bdcd8 mt76: add led support using mac80211 led framework 58e9138 mt76x2: init: add ma80211 led callbacks 8ea8da3 mt7603: init: add ma80211 led callbacks ded88cd mt76x2: Add PCI identifier for MT7602 51a6764 mt7603: remove unnecessary mcu register read function fbdbf65 debugfs: add support for changing the LED pin cc02e49 mac80211: move DT led configuration to the "led" child node e4e7734 mt76x2: limit client WCID entries to 0-127 60172cc mt76x2: clear drop flag for all WCIDs on init d8140b6 mt76x2: clear per-WCID tx rate lookup register 0ce7923 mt76x2: add helper function for setting drop mask ccc4baf mt76x2: clear drop mask when sending a PS response ff60d14 mt76: increase rx ring size for mt76x2 b57ada5 mt76x2: add rx statistics registers af425de mt76x2: fix LNA gain register annotation efd7724 mt76x2: sync channel gain value with latest reference driver 4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count 70f2002 mt76x2: add more gain tuning based on the latest reference driver 8f1c8ab mt76x2: sync tx power related values with reference driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: tweak TSQ settingsFelix Fietkau2017-11-162-1/+15
| | | | | | | | Latencies can be much higher on wifi devices, especially with aggregation. Tune the network stack setting introduced in the previous commit to account for that Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport a patch that allows drivers to tweak the TSQ logicFelix Fietkau2017-11-161-0/+85
| | | | | | | | | | | | | Currently local TCP performance on wifi devices can be limited because the TSQ (TCP Small Queues) code is tuned for wired ethernet latencies. With this patch drivers can increase the amount of local buffering to allow TCP to trigger larger aggregation sizes This commit is modified from the upstream version to allow #ifdef based backport feature detection Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to wireless-testing 2017-11-01Felix Fietkau2017-11-1630-1812/+720
| | | | | | | The wireless regdb is now loaded via firmware loading, CRDA support and built-in regdb support have been removed. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireless-regdb: add package containing the wireless regulatory databaseFelix Fietkau2017-11-163-0/+298
| | | | | | Installs to /lib/firmware for newer cfg80211 versions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ubus: update to the latest versionFelix Fietkau2017-11-161-3/+3
| | | | | | | | | | | 9c13096 ubus: Remove unnecessary memset calls. 6d1ea6c libubus: Fix deletion from context's object AVL tree when removing object e02813b ubusd: don't free messages in ubus_send_msg() anymore be146ad ubusd: rename goto label from `error` to `out` 27d712d ubusd_monitor: alloc & free the buffer outside of the loop 5f87f54 ubusd: move global retmsg per client Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libnl-tiny: use fixed message size instead of using the page sizeFelix Fietkau2017-11-161-6/+1
| | | | | | Simplifies the code and reduces size Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add support for ZBT WE3526Felix Fietkau2017-11-164-0/+130
| | | | | | | | | | | | | | | | | This is a variant of the ZBT WG3526 with a few minor modifications. The wifi chips are swapped, and there is no GPIO controllable status LED. There is also no SATA port. Specifications: - MT7621AT (880 MHz) - 512 MB RAM - 16 MB Flash (SPI NOR) - 5x 1Gbps Ethernet (built-in switch) - MT7612E 802.11ac 5 GHz WLAN - MT7603E 802.11n 2.4 GHz WLAN Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: extract board name from device tree as a fallbackFelix Fietkau2017-11-161-1/+3
| | | | | | | This makes it possible to avoid more duplication when adding support for a new board Signed-off-by: Felix Fietkau <nbd@nbd.name>
* otrx: always align image to 0x1000Rafał Miłecki2017-11-161-1/+7
| | | | | | | This seems to match what the original trx tool and mjn3's replacement do. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add packaging for mtdoopsJianhui Zhao2017-11-151-0/+14
| | | | Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
* cns3xxx: refresh kernel configKoen Vandeputte2017-11-151-6/+0
| | | | Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* modules: Add kmod-ixgbevf kernel module for Intel(R) 10GbE Virtual Ethernet ↵Chris Blakely2017-11-151-0/+19
| | | | | | | | | | | support These adapters support SR-IOV. Thus the host can assign Virtual Functions (VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to gain different advantages (performance, VF to VF communications, host kernel offload, etc.). Signed-off-by: Chris Blakely <cpblakely@gmail.com>
* packages: nvram: fix memory leak in _nvram_freeZhai Zhaoxuan2017-11-151-0/+4
| | | | | | | The value of nvram_tuple_t is allocated in _nvram_realloc, but it is not freed in _nvram_free. Signed-off-by: Zhai Zhaoxuan <zhaizhaoxuan@xiaomi.com>
* sysupgrade: don't kill our own parentMat Trudel2017-11-151-2/+3
| | | | | | | | Add the parent of the sysupgrade script to the list of pids not getting killed Signed-off-by: Mat Trudel <mat@geeky.net> Signed-off-by: John Crispin <john@phrozen.org>
* mvebu: backport a kernel irq fix for setting IRQ affinityFelix Fietkau2017-11-151-0/+17
| | | | | | | | The IRQ controller can only set the affinity to a single CPU. Update the mask in the controller data. Suggested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: rework frequency/ht/vht selection for ibss/meshFelix Fietkau2017-11-159-179/+58
| | | | | | | | | | - Remove obsolete patch chunks regarding fixed_freq - Instead of patching in custom HT40+/- parameters, use the standard config syntax as much as possible. - Use fixed_freq for mesh - Fix issues with disabling obss scan when using fixed_freq on mesh Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: don't pass the hostapd ctrl iface in adhocAntonio Quartulli2017-11-151-2/+8
| | | | | | | Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
* hostapd: explicitly set beacon interval for wpa_supplicantSven Eckelmann2017-11-151-0/+1
| | | | | | | | | | | | | | | The beacon_int is currently set explicitly for hostapd and when LEDE uses iw to join and IBSS/mesh. But it was not done when wpa_supplicant was used to join an encrypted IBSS or mesh. This configuration is required when an AP interface is configured together with an mesh interface. The beacon_int= line must therefore be re-added to the wpa_supplicant config. The value is retrieved from the the global variable. Fixes: 1a16cb9c67f0 ("mac80211, hostapd: always explicitly set beacon interval") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> [rebase]
* hostapd: set mcast_rate in mesh modeSven Eckelmann2017-11-151-0/+68
| | | | | | | | | | | | | | | | | | The wpa_supplicant code for IBSS allows to set the mcast rate. It is recommended to increase this value from 1 or 6 Mbit/s to something higher when using a mesh protocol on top which uses the multicast packet loss as indicator for the link quality. This setting was unfortunately not applied for mesh mode. But it would be beneficial when wpa_supplicant would behave similar to IBSS mode and set this argument during mesh join like authsae already does. At least it is helpful for companies/projects which are currently switching to 802.11s (without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS because newer drivers seem to support 802.11s but not IBSS anymore. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh]
* hostapd: refresh ubus patchFelix Fietkau2017-11-151-36/+18
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: merge mach-files for TP-Link TL-WR802N v1 and v2Paul Wassi2017-11-143-131/+53
| | | | | | | TP-Link TL-WR802N v1 and v2 are set up with almost same configuration in the mach-files. Merge the mach-files of these devices. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: add support for TP-Link TL-WR1043N v5Tim Thorpe2017-11-1414-4/+162
| | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe <tim@tfthorpe.net> Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
* ar71xx: add support for TP-Link TL-WA901ND v5Paul Wassi2017-11-148-3/+21
| | | | | | | | The TL-WA901ND v5 has the same hardware as v4, although the PCB has a different layout. Installation from factory is done via TFTP. (rename -factory image to wa901ndv4_tp_recovery.bin for tftp) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: complete support for RB mAP 2nDRobert Marko2017-11-1410-12/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD mAP 2nD https://mikrotik.com/product/RBmAP2nD Specifications: - SoC: Qualcomm QCA9531 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 2x100M (802.3af/at POE in and passive POE out on ETH2) - USB: microUSB type AB port This patch adds missing code to fully support mAP. Machfile already contained configuration for mAP 2nD, but device specific configuration like LEDs etc., was missing. Note: The POE LED works but doesn't turn on when POE passthrough is enabled, despite being configured with GPIO trigger. Installation 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: fix network setup for UniFiPaul Wassi2017-11-141-0/+1
| | | | | | | | The Ubiquiti UniFi APs just have eth0. Until now, the setup script fell through to the default case and configured the (not present) eth1 as WAN with DHCP. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: complete support for RB wAP 2nDRobert Marko2017-11-149-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD wAP https://mikrotik.com/product/RBwAP2nD Specifications: - SoC: Qualcomm QCA9533 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9533, 2x2:2 - Ethernet: 1x100M (802.3af/at POE in) This patch adds missing code to fully support wAP. Machfile already contained configuration for wAP 2nD but device specific configuration like LEDs etc. was missing. Installation: 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: add support for TP-Link TL-WR810N v2Paul Wassi2017-11-1411-14/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* firmware-utils: tplink-safeloader: add more country codes for Archer C7 v4Dmitry Tunin2017-11-141-0/+7
| | | | | | | If codes do not match, it is impossible to flash from the stock firmware. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
* uboot-envtools: add support for Wallys DR342Piotr Dymacz2017-11-141-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for Wallys DR342Piotr Dymacz2017-11-1413-45/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Wallys DR342 is a 5 GHz, 2T2R AP/CPE board based on Atheros AR9342. Short specification: - 560/450/225 MHz (CPU/DDR/AHB) - 1x Gbps Ethernet (AR8035) with passive PoE support (24-56 V) - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 5 GHz with external FEM (SKY85728-11), up to 30 dBm - 2x MMCX connectors - miniPCIe connector with PCIe and USB 2.0 buses - optional miniSIM slot - 7x LED, 1x button - UART, (E)JTAG and LED headers - 1x DC jack for main power (12-56 V) Flash instruction (do it under U-Boot, using UART): 1. tftp 0x82000000 lede-ar71xx-generic-dr342-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ramips: add support for UniElec U7628-01Piotr Dymacz2017-11-148-0/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UniElec U7628-01 is a router platform board based on MediaTek MT7628AN. The device has the following specifications: - MT7628AN (580MHz) - 64/128/256 MB of RAM (DDR2) - 8/16 MB of flash (SPI NOR) - 5x 10/100 Mbps Ethernet (MT7628 built-in switch) - 1x 2T2R 2.4 GHz Wi-Fi (MT7628) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x miniSIM slot - 1x microSD slot - 1x USB 2.0 port - 7x single-color LEDs (GPIO-controlled) - 1x bi-color LED (green GPIO-controlled, red -> LED_WLAN# in miniPCIe) - 1x reset button - 1x UART header (4-pins) - 1x SDXC/GPIO header (10-pins, connected with microSD slot) - 1x DC jack for main power (12 V) The following has been tested and is working: - Ethernet switch - miniPCIe slot (tested with modem and Wi-Fi card) - miniSIM slot - sysupgrade - reset button - USB 2.0 port* Due to a missing driver (MMC over GPIO) this is not supported: - microSD card reader * Warning: USB buses in miniPCIe and regular A-type socket are connected together, without any proper analog switch or USB HUB. Installation: This board might come with a different firmware versions (MediaTek SDK, PandoraBox, Padavan, etc.). If your board comes with PandoraBox, you can install LEDE using sysupgrade. Just SSH to the router and perform forced sysupgrade (due to a board name mismatch). The default IP of this board should be: 192.168.1.1 and username/password: root/admin. In case of a different firmware, you can use web based recovery described below. Use the following command to perform the sysupgrade (for the 128MB RAM/16MB flash version): sysupgrade -n -F lede-ramips-mt76x8-u7628-01-128M-16M-squashfs-sysupgrade.bin Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. SDXC/GPIO header (J3): 1. SDXC_D3 / I2C_SCLK 2. SDXC_D2 / I2C_SD 3. SDXC_D1 / I2S_DI 4. SDXC_D0 / I2S_WS 5. SDXC_CMD / I2S_CLK 6. SDXC_CLK / GPIO0 7. SDXC_CD / UART_RXD1 8. UART_TXD1 9. 3V3 10. GND Other notes: 1. The board is available with different amounts of RAM and flash. We have only added support for the 128/16 MB configuration, as that seems to be the default. However, all the required infrastructure is in place for making support for the other configurations easy. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* ramips: add support for UniElec U7621-06Piotr Dymacz2017-11-147-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UniElec U7621-06 is a router platform board based on MediaTek MT7621AT. The device has the following specifications: - MT7621AT (880 MHz) - 256/512 MB of RAM (DDR3) - 8/16/32/64 MB of FLASH (SPI NOR) - 5x 1 Gbps Ethernet (MT7621 built-in switch) - 1x ASMedia ASM1061 (for mSATA and SATA) - 2x miniPCIe slots (PCIe bus only) - 1x mSATA slot (with USB 2.0 bus for modem) - 1x SATA - 1x miniSIM slot - 1x microSD slot - 1x USB 3.0 - 12x LEDs (3 GPIO-controlled) - 1x reset button - 1x UART header (4-pins) - 1x GPIO header (30-pins) - 1x FPC connector for LEDs (20-pin, 0.5 mm pitch) - 1x DC jack for main power (12 V) The following has been tested and is working: - Ethernet switch - miniPCIe slots (tested with Wi-Fi cards) - mSATA slot (tested with modem and mSATA drive) - miniSIM slot - sysupgrade - reset button - microSD slot Installation: This board might come with a different firmware versions (MediaTek SDK, PandoraBox, Padavan, etc.). If your board comes with PandoraBox, you can install LEDE using sysupgrade. Just SSH to the router and perform forced sysupgrade (due to a board name mismatch). The default IP of this board should be: 192.168.1.1 and username/password: root/admin. In case of a different firmware, you can use web based recovery described below. Use the following command to perform the sysupgrade (for the 256MB RAM/16MB flash version): sysupgrade -n -F lede-ramips-mt7621-u7621-06-256M-16M-squashfs-sysupgrade.bin Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. LEDs list (top row, left to right): - LED_WWAN# (connected with pin 42 in LTE/mSATA slot) - Power (connected directly to 3V3) - CTS2_N (GPIO10, configured as "status" LED) - TXD2 (GPIO11, configured as "led4", without default trigger) - RXD2 (GPIO12, configured as "led5", without default trigger) - LED_WLAN# (connected with pin 44 in wifi0 slot) LEDs list (bottom row, left to right): - ESW_P0_LED_0 - ESW_P1_LED_0 - ESW_P2_LED_0 - ESW_P3_LED_0 - ESW_P4_LED_0 - LED_WLAN# (connected with pin 44 in wifi1 slot) Other notes: 1. The board is available with different amounts of RAM and flash. We have only added support for the 256/16 MB configuration, as that seems to be the default. However, all the required infrastructure is in place for making support for the other configurations easy. 2. The manufacturer offers five different wireless cards with MediaTek chipsets, based on MT76x2, MT7603 and MT7615. Images of the board all show that the miniPCIe slots are dedicated to specific Wi-Fi cards. However, the slots are generic. 3. All boards we got access to had the same EEPROM content. The default firmware reads the Ethernet MAC from offset 0xe000 in factory partition. This offset only contains 0xffs, so a random MAC will be generated on every boot of the router. There is a valid MAC stored at offset 0xe006 and this MAC is shown as the WAN MAC in the bootloader. However, it is the same on all boards we have checked. Based on information provided by the vendor, all boards sold in small quantities are considered more as samples for development purposes. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* ar71xx: increase kernel partition size for TP-Link RE450 v1Piotr Dymacz2017-11-142-3/+3
| | | | | | | | | | | This increases kernel partition size and fixes rootfs (file-system) partition size on TP-Link RE450 v1. Also, while we are at it, switch from statically defined kernel and rootfs partitions in kernel cmdline to "tplink-fw" mtd splitter. Fixes: FS#1072. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: fix typo in Kconfig.openwrtPiotr Dymacz2017-11-141-1/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: fix typo in tp-link.mkPiotr Dymacz2017-11-141-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: increase kernel partition size for some TP-Link boardsHenryk Heisig2017-11-142-13/+14
| | | | | | | | | | | | | | This patch increases kernel partition size and re-enables image generation for below TP-Link boards: - archer-c58-v1 - archer-c60-v1 - tl-wr902ac-v1 - tl-wr942n-v1 Signed-off-by: Henryk Heisig <hyniu@o2.pl> [commit message and title reworded] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* otrx: add support for -A (append) and -a (align) optionsRafał Miłecki2017-11-141-1/+24
| | | | | | They are inspired and compatible with the original and mjn3's trx tool. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 00:07:37 +0000