diff options
Diffstat (limited to 'tools/firmware-utils')
-rw-r--r-- | tools/firmware-utils/Makefile | 1 | ||||
-rw-r--r-- | tools/firmware-utils/src/edimax_fw_header.c | 386 |
2 files changed, 387 insertions, 0 deletions
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile index 988c6256af..83c51d7d90 100644 --- a/tools/firmware-utils/Makefile +++ b/tools/firmware-utils/Makefile @@ -71,6 +71,7 @@ define Host/Compile $(call cc,mkheader_gemtek,-lz) $(call cc,mkrtn56uimg, -lz) $(call cc,dgn3500sum) + $(call cc,edimax_fw_header, -Wall) endef define Host/Install diff --git a/tools/firmware-utils/src/edimax_fw_header.c b/tools/firmware-utils/src/edimax_fw_header.c new file mode 100644 index 0000000000..ff094da1ad --- /dev/null +++ b/tools/firmware-utils/src/edimax_fw_header.c @@ -0,0 +1,386 @@ +/* + * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <unistd.h> /* for unlink() */ +#include <libgen.h> +#include <getopt.h> /* for getopt() */ +#include <stdarg.h> +#include <errno.h> +#include <sys/stat.h> + +#include <arpa/inet.h> +#include <netinet/in.h> + +#define MAX_MAGIC_LEN 16 +#define MAX_MODEL_LEN 32 +#define MAX_VERSION_LEN 14 +#define MAX_MTD_NAME_LEN 16 + +#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + +struct edimax_header { + char magic[MAX_MAGIC_LEN]; + char model[MAX_MODEL_LEN]; + unsigned char force; + unsigned char header_csum; + unsigned char data_csum; + uint32_t data_size; + uint32_t start_addr; + uint32_t end_addr; + char fw_version[MAX_VERSION_LEN]; + unsigned char type; + char mtd_name[MAX_MTD_NAME_LEN]; +} __attribute__ ((packed)); + +/* + * Globals + */ +static char *ofname; +static char *ifname; +static char *progname; + +static char *model; +static char *magic = "eDiMaX"; +static char *fw_version = ""; +static char *mtd_name; +static int force; +static uint32_t start_addr; +static uint32_t end_addr; +static uint8_t image_type; +static int data_size; + +/* + * Message macros + */ +#define ERR(fmt, ...) do { \ + fflush(0); \ + fprintf(stderr, "[%s] *** error: " fmt "\n", \ + progname, ## __VA_ARGS__ ); \ +} while (0) + +#define ERRS(fmt, ...) do { \ + int save = errno; \ + fflush(0); \ + fprintf(stderr, "[%s] *** error: " fmt " (%s)\n", \ + progname, ## __VA_ARGS__, strerror(save)); \ +} while (0) + +#define DBG(fmt, ...) do { \ + fprintf(stderr, "[%s] " fmt "\n", progname, ## __VA_ARGS__ ); \ +} while (0) + +static void usage(int status) +{ + FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout; + + fprintf(stream, "Usage: %s [OPTIONS...]\n", progname); + fprintf(stream, +"\n" +"Options:\n" +" -e <addr> set end addr to <addr>\n" +" -f set force flag\n" +" -h show this screen\n" +" -i <file> read input data from the file <file>\n" +" -o <file> write output to the file <file>\n" +" -m <model> set model to <model>\n" +" -M <magic> set image magic to <magic>\n" +" -n <name> set MTD device name to <name>\n" +" -s <addr> set start address to <addr>\n" +" -t <type> set image type to <type>\n" +" -v <version> set firmware version to <version>\n" + ); + + exit(status); +} + +int +str2u32(char *arg, uint32_t *val) +{ + char *err = NULL; + uint32_t t; + + errno=0; + t = strtoul(arg, &err, 0); + if (errno || (err==arg) || ((err != NULL) && *err)) { + return -1; + } + + *val = t; + return 0; +} + +int +str2u8(char *arg, uint8_t *val) +{ + char *err = NULL; + uint32_t t; + + errno=0; + t = strtoul(arg, &err, 0); + if (errno || (err==arg) || ((err != NULL) && *err) || (t >= 0x100)) { + return -1; + } + + *val = t & 0xFF; + return 0; +} + +static int get_file_size(char *name) +{ + struct stat st; + int res; + + res = stat(name, &st); + if (res){ + ERRS("stat failed on %s", name); + return -1; + } + + return st.st_size; +} + +static int read_to_buf(char *name, char *buf, int buflen) +{ + FILE *f; + int ret = EXIT_FAILURE; + + f = fopen(name, "r"); + if (f == NULL) { + ERRS("could not open \"%s\" for reading", name); + goto out; + } + + errno = 0; + fread(buf, buflen, 1, f); + if (errno != 0) { + ERRS("unable to read from file \"%s\"", name); + goto out_close; + } + + ret = EXIT_SUCCESS; + +out_close: + fclose(f); +out: + return ret; +} + +static int check_options(void) +{ +#define CHKSTR(_name, _msg) \ + do { \ + if (_name == NULL) { \ + ERR("no %s specified", _msg); \ + return -1; \ + } \ + } while (0) + +#define CHKSTRLEN(_name, _msg) \ + do { \ + int field_len; \ + CHKSTR(_name, _msg); \ + field_len = FIELD_SIZEOF(struct edimax_header, _name) - 1; \ + if (strlen(_name) > field_len) { \ + ERR("'%s' is too long, max %s length is %d", \ + _name, _msg, field_len); \ + return -1; \ + } \ + } while (0) + + CHKSTR(ofname, "output file"); + CHKSTR(ifname, "input file"); + + CHKSTRLEN(magic, "magic"); + CHKSTRLEN(model, "model"); + CHKSTRLEN(mtd_name, "MTD device name"); + CHKSTRLEN(fw_version, "firware version"); + + data_size = get_file_size(ifname); + if (data_size < 0) + return -1; + + return 0; +} + +static int write_fw(char *data, int len) +{ + FILE *f; + int ret = EXIT_FAILURE; + + f = fopen(ofname, "w"); + if (f == NULL) { + ERRS("could not open \"%s\" for writing", ofname); + goto out; + } + + errno = 0; + fwrite(data, len, 1, f); + if (errno) { + ERRS("unable to write output file"); + goto out_flush; + } + + DBG("firmware file \"%s\" completed", ofname); + + ret = EXIT_SUCCESS; + +out_flush: + fflush(f); + fclose(f); + if (ret != EXIT_SUCCESS) { + unlink(ofname); + } +out: + return ret; +} + +static unsigned char checksum(unsigned char *p, unsigned len) +{ + unsigned char csum = 0; + + while (len--) + csum += *p++; + + csum ^= 0xb9; + + return csum; +} + +static int build_fw(void) +{ + int buflen; + char *buf; + char *data; + struct edimax_header *hdr; + int ret = EXIT_FAILURE; + + buflen = sizeof(struct edimax_header) + data_size; + + buf = malloc(buflen); + if (!buf) { + ERR("no memory for buffer\n"); + goto out; + } + + data = buf + sizeof(struct edimax_header); + + /* read input file */ + ret = read_to_buf(ifname, data, data_size); + if (ret) + goto out_free_buf; + + /* fill firmware header */ + hdr = (struct edimax_header *)buf; + memset(hdr, 0, sizeof(struct edimax_header *)); + + strncpy(hdr->model, model, sizeof(hdr->model)); + strncpy(hdr->magic, magic, sizeof(hdr->magic)); + strncpy(hdr->fw_version, fw_version, sizeof(hdr->fw_version)); + strncpy(hdr->mtd_name, mtd_name, sizeof(hdr->mtd_name)); + + hdr->force = force; + hdr->start_addr = htonl(start_addr); + hdr->end_addr = htonl(end_addr); + hdr->data_size = htonl(data_size); + hdr->type = image_type; + + hdr->data_csum = checksum((unsigned char *)data, data_size); + hdr->header_csum = checksum((unsigned char *)hdr, + sizeof(struct edimax_header)); + + ret = write_fw(buf, buflen); + if (ret) + goto out_free_buf; + + ret = EXIT_SUCCESS; + +out_free_buf: + free(buf); +out: + return ret; +} + +int main(int argc, char *argv[]) +{ + int ret = EXIT_FAILURE; + + progname = basename(argv[0]); + + while (1) { + int c; + + c = getopt(argc, argv, "e:fhi:o:m:M:n:s:t:v:"); + if (c == -1) + break; + + switch (c) { + case 'e': + if (str2u32(optarg, &end_addr)) { + ERR("%s is invalid '%s'", + "end address", optarg); + goto out; + } + break; + case 'f': + force = 1; + break; + case 'i': + ifname = optarg; + break; + case 'h': + usage(EXIT_SUCCESS); + break; + case 'o': + ofname = optarg; + break; + case 'm': + model = optarg; + break; + case 'M': + magic = optarg; + break; + case 'n': + mtd_name = optarg; + break; + case 's': + if (str2u32(optarg, &start_addr)) { + ERR("%s is invalid '%s'", + "start address", optarg); + goto out; + } + break; + case 't': + if (str2u8(optarg, &image_type)) { + ERR("%s is invalid '%s'", + "image type", optarg); + goto out; + } + break; + case 'v': + fw_version = optarg; + break; + default: + usage(EXIT_FAILURE); + break; + } + } + + ret = check_options(); + if (ret) + goto out; + + ret = build_fw(); + +out: + return ret; +} |