diff options
Diffstat (limited to 'target')
4 files changed, 10 insertions, 56 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index bb77332ef9..a75d32ab6f 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -29,14 +29,8 @@ tplink,vr2600v) ;; edgecore,ecw5410) ucidef_set_interfaces_lan_wan "eth1" "eth0" - if [ -b "$(find_mtd_part 0:art)" ]; then - ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:art" 0x6)" - ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:art" 0x0)" - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:ART" 0x6)" - ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:ART" 0x0)" - fi + ucidef_set_interface_macaddr "lan" "$(mtd_get_mac_binary "0:art" 0x6)" + ucidef_set_interface_macaddr "wan" "$(mtd_get_mac_binary "0:art" 0x0)" ;; linksys,ea7500-v1) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) @@ -81,9 +75,6 @@ ubnt,unifi-ac-hd) ;; zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr) - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - [ -n "$hw_mac_addr" ] || \ - hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)" diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 2746ef1e2a..c8924df92f 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -13,23 +13,13 @@ case "$FIRMWARE" in caldata_extract "0:ART" 0x1000 0x2f20 ;; asrock,g10) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x1000 0x2f20 - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x1000 0x2f20 - fi + caldata_extract "0:art" 0x1000 0x2f20 ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x1000 0x2f20 ;; edgecore,ecw5410) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x1000 0x2f20 - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x1000 0x2f20 - fi + caldata_extract "0:art" 0x1000 0x2f20 ;; linksys,ea7500-v1 |\ linksys,ea8500) @@ -56,14 +46,8 @@ case "$FIRMWARE" in caldata_extract "ART" 0x1000 0x2f20 ;; zyxel,nbg6817) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:appsblenv ethaddr) 1) - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1) - fi + caldata_extract "0:art" 0x1000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:appsblenv ethaddr) 1) ;; esac ;; @@ -73,12 +57,7 @@ case "$FIRMWARE" in caldata_extract "0:ART" 0x5000 0x2f20 ;; asrock,g10) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x5000 0x2f20 - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x5000 0x2f20 - fi + caldata_extract "0:art" 0x5000 0x2f20 ;; buffalo,wxr-2533dhp) caldata_extract "ART" 0x5000 0x2f20 @@ -108,26 +87,15 @@ case "$FIRMWARE" in caldata_extract "ART" 0x5000 0x2f20 ;; zyxel,nbg6817) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_ascii 0:appsblenv ethaddr) - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) - fi + caldata_extract "0:art" 0x5000 0x2f20 + ath10k_patch_mac $(mtd_get_mac_ascii 0:appsblenv ethaddr) ;; esac ;; "ath10k/pre-cal-pci-0002:01:00.0.bin") case $board in edgecore,ecw5410) - if [ -b "$(find_mtd_part 0:art)" ]; then - caldata_extract "0:art" 0x5000 0x2f20 - else - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - caldata_extract "0:ART" 0x5000 0x2f20 - fi + caldata_extract "0:art" 0x5000 0x2f20 ;; esac ;; diff --git a/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh index 8be737d2da..9645b64671 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/asrock.sh @@ -2,8 +2,6 @@ asrock_bootconfig_mangle() { local mtdnum="$(find_mtd_index 0:bootconfig)" - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - [ -n "$mtdnum" ] || mtdnum="$(find_mtd_index 0:BOOTCONFIG)" if [ -z "$mtdnum" ]; then echo "cannot find bootconfig mtd partition" diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh index 50f8a3ceaf..f5501822f3 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh @@ -91,9 +91,6 @@ zyxel_do_upgrade() { case "$board" in zyxel,nbg6817) local dualflagmtd="$(find_mtd_part 0:dual_flag)" - # XXX: drop upper case after kernel v5.4 is gone (qcom-smem) - [ -b $dualflagmtd ] || \ - dualflagmtd="$(find_mtd_part 0:DUAL_FLAG)" [ -b $dualflagmtd ] || return 1 case "$rootfs" in |