diff options
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts | 130 | ||||
-rw-r--r-- | target/linux/ath79/generic/base-files/etc/board.d/02_network | 4 | ||||
-rw-r--r-- | target/linux/ath79/image/generic.mk | 9 |
3 files changed, 143 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts b/target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts new file mode 100644 index 0000000000..a84c273f86 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Embedded Wireless Balin"; + compatible = "embeddedwireless,balin", "qca,ar9344"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: led-0 { + label = "green:system"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + linux,code = <KEY_RESTART>; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_art_1000: calibration_data@1000 { + reg = <0x1000 0x440>; + }; + + macaddr_art_1002: macaddr@1002 { + reg = <0x1002 0x6>; + }; + }; + }; + }; +}; + +&builtin_switch { + /delete-property/qca,phy4-mii-enable; +}; + +ð1 { + status = "okay"; + + nvmem-cells = <&macaddr_art_1002>; + nvmem-cell-names = "mac-address"; + mac-address-increment-byte = <3>; + mac-address-increment = <0x40>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <0>; + switch-only-mode = <1>; + }; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&macaddr_art_1002>, <&calibration_art_1000>; + nvmem-cell-names = "mac-address", "calibration"; +}; + +&pcie { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 01e364a8fe..8c09932bd7 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -265,6 +265,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan" ;; + embeddedwireless,balin) + ucidef_add_switch "switch0" \ + "0@eth0" "5:lan:1" "4:lan:2" "3:wan" + ;; embeddedwireless,dorin) ucidef_add_switch "switch0" \ "0@eth0" "1:wan" "2:lan:3" "3:lan:2" diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 39f616b010..c259db94af 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1028,6 +1028,15 @@ define Device/elecom_wrc-300ghbk2-i endef TARGET_DEVICES += elecom_wrc-300ghbk2-i +define Device/embeddedwireless_balin + SOC := ar9344 + DEVICE_VENDOR := Embedded Wireless + DEVICE_MODEL := Balin + DEVICE_PACKAGES := kmod-usb-chipidea2 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += embeddedwireless_balin + define Device/embeddedwireless_dorin SOC := ar9331 DEVICE_VENDOR := Embedded Wireless |