diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 12 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 4 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 2 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 2 | ||||
| -rw-r--r-- | target/linux/ramips/dts/ArcherC20v1.dts (renamed from target/linux/ramips/dts/ArcherC20.dts) | 25 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7620.mk | 28 |
7 files changed, 37 insertions, 39 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 3e26493e54..37393eeb27 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -91,12 +91,6 @@ c108) ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0" ;; -c20) - ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" - ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" - set_usb_led "$boardname:blue:usb" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" - ;; c20i) ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" @@ -388,6 +382,12 @@ tl-wr841n-v13) ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; +tplink,c20-v1) + ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01" + set_usb_led "$boardname:blue:usb" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0" + ;; tplink,tl-mr3420-v5) set_usb_led "$boardname:green:usb" set_wifi_led "$boardname:green:wlan" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 105f5e9e32..a90fe96f91 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -190,8 +190,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" ;; - c20|\ - c50) + c50|\ + tplink,c20-v1) ucidef_add_switch "switch0" \ "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" ;; diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index e1d29152f1..df9858cb32 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -124,7 +124,6 @@ get_status_led() { w502u) status_led="$boardname:blue:wps" ;; - c20|\ d240|\ dap-1350|\ na930|\ @@ -136,6 +135,7 @@ get_status_led() { rt-n14u|\ rt-n15|\ rt-n56u|\ + tplink,c20-v1|\ wl-330n|\ wl-330n3g|\ wli-tx4-ag300n|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index e85b293610..3ba6d0f0f5 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -85,9 +85,6 @@ ramips_board_detect() { *"C108") name="c108" ;; - *"C20") - name="c20" - ;; *"C20i") name="c20i" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e2ab3a643e..71ad0c1b83 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -237,10 +237,10 @@ platform_check_image() { } return 0 ;; - c20|\ c20i|\ c50|\ mr200|\ + tplink,c20-v1|\ tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ diff --git a/target/linux/ramips/dts/ArcherC20.dts b/target/linux/ramips/dts/ArcherC20v1.dts index f0281c37c3..9d8a2b595c 100644 --- a/target/linux/ramips/dts/ArcherC20.dts +++ b/target/linux/ramips/dts/ArcherC20v1.dts @@ -6,8 +6,8 @@ #include <dt-bindings/gpio/gpio.h> / { - compatible = "tplink,c20", "ralink,mt7620a-soc"; - model = "TP-Link Archer C20"; + compatible = "tplink,c20-v1", "ralink,mt7620a-soc"; + model = "TP-Link Archer C20 v1"; chosen { bootargs = "console=ttyS0,115200"; @@ -17,43 +17,43 @@ compatible = "gpio-leds"; lan { - label = "c20:blue:lan"; + label = "c20-v1:blue:lan"; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; power { - label = "c20:blue:power"; + label = "c20-v1:blue:power"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; usb { - label = "c20:blue:usb"; + label = "c20-v1:blue:usb"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; wan { - label = "c20:blue:wan"; + label = "c20-v1:blue:wan"; gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; }; wan_orange { - label = "c20:orange:wan"; + label = "c20-v1:orange:wan"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; wlan5g { - label = "c20:blue:wlan5g"; + label = "c20-v1:blue:wlan5g"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; }; wlan2g { - label = "c20:blue:wlan2g"; + label = "c20-v1:blue:wlan2g"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; wps { - label = "c20:blue:wps"; + label = "c20-v1:blue:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -74,7 +74,8 @@ label = "rfkill"; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_RFKILL>; - }; }; + }; + }; }; &gpio1 { @@ -178,7 +179,7 @@ mt76@0,0 { reg = <0x0000 0 0 0 0>; device_type = "pci"; - mediatek,mtd-eeprom = <&radio 32768>; + mediatek,mtd-eeprom = <&radio 0x8000>; ieee80211-freq-limit = <5000000 6000000>; mtd-mac-address = <&rom 0xf100>; mtd-mac-address-increment = <(-1)>; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 6f9aa1aa6d..d4c4e719b7 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -45,20 +45,6 @@ define Device/Archer IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata endef -define Device/ArcherC20 - $(Device/Archer) - DTS := ArcherC20 - SUPPORTED_DEVICES := c20 - TPLINK_FLASHLAYOUT := 8Mmtk - TPLINK_HWID := 0xc2000001 - TPLINK_HWREV := 0x44 - TPLINK_HWREVADD := 0x1 - IMAGES += factory.bin - DEVICE_TITLE := TP-Link ArcherC20 - DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += ArcherC20 - define Device/ArcherC20i $(Device/Archer) DTS := ArcherC20i @@ -433,6 +419,20 @@ define Device/tiny-ac endef TARGET_DEVICES += tiny-ac +define Device/tplink_c20-v1 + $(Device/Archer) + DTS := ArcherC20v1 + SUPPORTED_DEVICES := c20v1 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0xc2000001 + TPLINK_HWREV := 0x44 + TPLINK_HWREVADD := 0x1 + IMAGES += factory.bin + DEVICE_TITLE := TP-Link ArcherC20 v1 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += tplink_c20-v1 + define Device/vonets_var11n-300 DTS := VAR11N-300 IMAGE_SIZE := $(ralink_default_fw_size_4M) |