diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/generic/files/drivers/net/phy/ar8216.c | 24 |
1 files changed, 19 insertions, 5 deletions
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index d514ec724f..36668646d3 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -38,7 +38,11 @@ struct ar8216_priv; +#define AR8XXX_CAP_GIGE BIT(0) + struct ar8xxx_chip { + unsigned long caps; + int (*hw_init)(struct ar8216_priv *priv); void (*init_port)(struct ar8216_priv *priv, int port); void (*setup_port)(struct ar8216_priv *priv, int port, u32 egress, @@ -74,6 +78,11 @@ struct ar8216_priv { #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev) +static inline bool ar8xxx_has_gige(struct ar8216_priv *priv) +{ + return priv->chip->caps & AR8XXX_CAP_GIGE; +} + static inline void split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) { @@ -757,8 +766,8 @@ ar8216_init_port(struct ar8216_priv *priv, int port) if (port == AR8216_PORT_CPU) { priv->write(priv, AR8216_REG_PORT_STATUS(port), AR8216_PORT_STATUS_LINK_UP | - ((priv->chip_type == AR8316) ? - AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) | + ar8xxx_has_gige(priv) ? AR8216_PORT_SPEED_1000M : + AR8216_PORT_SPEED_100M | AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC | ((priv->chip_type == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) | @@ -789,6 +798,7 @@ static const struct ar8xxx_chip ar8236_chip = { }; static const struct ar8xxx_chip ar8316_chip = { + .caps = AR8XXX_CAP_GIGE, .hw_init = ar8316_hw_init, .init_port = ar8216_init_port, .setup_port = ar8216_setup_port, @@ -917,10 +927,12 @@ ar8216_config_init(struct phy_device *pdev) goto err_free_priv; if (pdev->addr != 0) { - if (priv->chip_type == AR8316) { + if (ar8xxx_has_gige(priv)) { pdev->supported |= SUPPORTED_1000baseT_Full; pdev->advertising |= ADVERTISED_1000baseT_Full; + } + if (priv->chip_type == AR8316) { /* check if we're attaching to the switch twice */ pdev = pdev->bus->phy_map[0]; if (!pdev) { @@ -953,8 +965,10 @@ ar8216_config_init(struct phy_device *pdev) printk(KERN_INFO "%s: AR%d switch driver attached.\n", pdev->attached_dev->name, priv->chip_type); - pdev->supported = priv->chip_type == AR8316 ? - SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full; + if (ar8xxx_has_gige(priv)) + pdev->supported = SUPPORTED_1000baseT_Full; + else + pdev->supported = SUPPORTED_100baseT_Full; pdev->advertising = pdev->supported; mutex_init(&priv->reg_mutex); |