diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network | 69 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/diag.sh | 2 | ||||
| -rwxr-xr-x | target/linux/ar71xx/base-files/etc/uci-defaults/leds | 3 |
3 files changed, 72 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network new file mode 100644 index 0000000000..69d7dc712b --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3800/network @@ -0,0 +1,69 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0.1 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp + +config switch + option name rtl8366s + option reset 1 + option enable_vlan 1 + # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms + option blinkrate 2 + +config switch_vlan + option device rtl8366s + option vlan 1 + option ports "0 1 2 3 5t" + +config switch_port + # Port 1 controls the GREEN configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); + # 14: Link (master); 15: separate register + + option device rtl8366s + option port 1 + option led 6 + +config switch_port + # Port 2 controls the ORANGE configuration of LEDs for + # the switch and the section does not correspond to a real + # switch port. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + + option device rtl8366s + option port 2 + option led 9 + +config switch_port + # Port 5 controls the configuration of the WAN LED and the + # section does not correspond to a real switch port. + # + # To toggle the use of green or orange LEDs for the WAN port, + # see the LED setting for wndr3700:green:wan in /etc/config/system. + # + # See the key above for switch port 1 for the meaning of the + # 'led' setting below. + + option device rtl8366s + option port 5 + option led 2 diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index dd5b6b1b4e..cb3b85177c 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -111,7 +111,7 @@ get_status_led() { wzr-hp-g300nh) status_led="buffalo:green:router" ;; - wndr3700 | wndr3700v2) + wndr3700 | wndr3700v2 | wndr3800) status_led="wndr3700:green:power" ;; wnr2000) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index 8f72bbaca9..0a724221cf 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -124,7 +124,8 @@ wrt160nl) ;; wndr3700 | \ -wndr3700v2) +wndr3700v2 | \ +wndr3800) set_led_default "wan" "WAN LED (green)" "wndr3700:green:wan" "0" set_led_usbdev "usb" "USB" "wndr3700:green:usb" "1-1" ;; |