diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ramips/dts/mt7628an_asus_rt-ac1200.dts | 157 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 9 | ||||
| -rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 54 |
3 files changed, 194 insertions, 26 deletions
diff --git a/target/linux/ramips/dts/mt7628an_asus_rt-ac1200.dts b/target/linux/ramips/dts/mt7628an_asus_rt-ac1200.dts new file mode 100644 index 0000000000..dbb8302b85 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_asus_rt-ac1200.dts @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2022 Ray Wang +// Copyright (c) 2022 Ivan Pavlov + +#include "mt7628an.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "asus,rt-ac1200", "mediatek,mt7628an-soc"; + model = "Asus RT-AC1200"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "blue:power"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + usb { + label = "blue:usb"; + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + led-all { + gpio-export,name = "led_all"; + gpio-export,output = <0>; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "nvram"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_28: macaddr@28 { + reg = <0x28 0x6>; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_28>; + nvmem-cell-names = "mac-address"; +}; + +&esw { + mediatek,portmap = <0x3e>; +}; + +&wmac { + status = "okay"; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "spi cs1", "refclk", "wled_an"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 49b3c860dc..4482a1e315 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -38,6 +38,15 @@ define Device/alfa-network_awusfree1 endef TARGET_DEVICES += alfa-network_awusfree1 +define Device/asus_rt-ac1200 + IMAGE_SIZE := 16064k + DEVICE_VENDOR := Asus + DEVICE_MODEL := RT-AC1200 + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \ + kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += asus_rt-ac1200 + define Device/asus_rt-n10p-v3 IMAGE_SIZE := 7872k DEVICE_VENDOR := Asus diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 00fb88aa3c..7791ee6be2 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -34,6 +34,29 @@ ramips_setup_interfaces() ucidef_add_switch_attr "switch0" "enable" "false" ucidef_set_interface_lan "eth0" ;; + asus,rt-ac1200|\ + hilink,hlk-7628n|\ + hilink,hlk-7688a|\ + hiwifi,hc5861b|\ + skylab,skw92a|\ + tplink,archer-c20-v4|\ + tplink,archer-c20-v5|\ + tplink,archer-c50-v3|\ + tplink,archer-c50-v4|\ + tplink,tl-mr3420-v5|\ + tplink,tl-wr840n-v4|\ + tplink,tl-wr840n-v5|\ + tplink,tl-wr841n-v13|\ + tplink,tl-wr841n-v14|\ + tplink,tl-wr842n-v5|\ + tplink,tl-wr850n-v2|\ + unielec,u7628-01-16m|\ + wrtnode,wrtnode2p|\ + wrtnode,wrtnode2r|\ + zyxel,keenetic-extra-ii) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; asus,rt-n10p-v3|\ asus,rt-n11p-b1|\ asus,rt-n12-vp-b1|\ @@ -69,28 +92,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" ;; - hilink,hlk-7628n|\ - hilink,hlk-7688a|\ - hiwifi,hc5861b|\ - skylab,skw92a|\ - tplink,archer-c20-v4|\ - tplink,archer-c20-v5|\ - tplink,archer-c50-v3|\ - tplink,archer-c50-v4|\ - tplink,tl-mr3420-v5|\ - tplink,tl-wr840n-v4|\ - tplink,tl-wr840n-v5|\ - tplink,tl-wr841n-v13|\ - tplink,tl-wr841n-v14|\ - tplink,tl-wr842n-v5|\ - tplink,tl-wr850n-v2|\ - unielec,u7628-01-16m|\ - wrtnode,wrtnode2p|\ - wrtnode,wrtnode2r|\ - zyxel,keenetic-extra-ii) - ucidef_add_switch "switch0" \ - "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" - ;; hiwifi,hc5761a) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "4:wan" "6@eth0" @@ -176,6 +177,11 @@ ramips_setup_macs() local label_mac="" case $board in + asus,rt-ac1200|\ + elecom,wrc-1167fs) + wan_mac=$(mtd_get_mac_binary factory 0x22) + label_mac=$wan_mac + ;; buffalo,wcr-1166ds) wan_mac=$(mtd_get_mac_ascii board_data "mac") lan_mac=$wan_mac @@ -198,10 +204,6 @@ ramips_setup_macs() zyxel,keenetic-extra-ii) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; - elecom,wrc-1167fs) - wan_mac=$(mtd_get_mac_binary factory 0x22) - label_mac=$wan_mac - ;; hiwifi,hc5661a|\ hiwifi,hc5761a|\ hiwifi,hc5861b) |