diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ath79/dts/ar9331_pisen_ts-d084.dts | 115 | ||||
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 11 |
3 files changed, 127 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 9702a29ad9..7387b6b7f1 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -25,6 +25,7 @@ ath79_setup_interfaces() ocedo,koala|\ ocedo,raccoon|\ pcs,cap324|\ + pisen,ts-d084|\ pisen,wmb001n|\ pisen,wmm003n|\ pqi,air-pen|\ diff --git a/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts b/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts new file mode 100644 index 0000000000..1dc659b9e4 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_pisen_ts-d084.dts @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9331.dtsi" + +/ { + model = "Pisen TS-D084"; + compatible = "pisen,ts-d084", "qca,ar9331"; + + aliases { + serial0 = &uart; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "ts-d084:blue:system"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + firmware: partition@20000 { + compatible = "tplink,firmware"; + reg = <0x20000 0x7d0000>; + label = "firmware"; + }; + + art: partition@7f0000 { + reg = <0x7f0000 0x10000>; + label = "art"; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&uboot 0x1fc00>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + compatible = "syscon", "simple-mfd"; +}; + +&gpio { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&uboot 0x1fc00>; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 5c8826b927..6f1ad5b708 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1,5 +1,6 @@ include ./common-buffalo.mk include ./common-netgear.mk +include ./common-tp-link.mk DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK @@ -817,6 +818,16 @@ define Device/netgear_wndr3700v2 endef TARGET_DEVICES += netgear_wndr3700v2 +define Device/pisen_ts-d084 + $(Device/tplink-8mlzma) + ATH_SOC := ar9331 + DEVICE_VENDOR := PISEN + DEVICE_MODEL := TS-D084 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2 + TPLINK_HWID := 0x07030101 +endef +TARGET_DEVICES += pisen_ts-d084 + define Device/pisen_wmb001n ATH_SOC := ar9341 DEVICE_VENDOR := PISEN |