diff options
Diffstat (limited to 'target/linux')
48 files changed, 377 insertions, 216 deletions
diff --git a/target/linux/bcm63xx/base-files/etc/diag.sh b/target/linux/bcm63xx/base-files/etc/diag.sh deleted file mode 100644 index 4b6d8d6065..0000000000 --- a/target/linux/bcm63xx/base-files/etc/diag.sh +++ /dev/null @@ -1,167 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007-2013 OpenWrt.org - -. /lib/functions.sh -. /lib/functions/leds.sh - -set_state() { - case "$(board_name)" in - actiontec,r1000h) - status_led="R1000H:green:power" - ;; - adb,a4001n) - status_led="A4001N:green:power" - ;; - adb,a4001n1) - status_led="A4001N1:green:power" - ;; - adb,av4202n) - status_led="AV4202N:white:power" - ;; - asmax,ar-1004g) - status_led="AR1004G:green:power" - ;; - brcm,bcm963281tan) - status_led="963281TAN::power" - ;; - brcm,bcm96328avng) - status_led="96328avng::power" - ;; - brcm,bcm96348gw) - status_led="96348GW:green:power" - ;; - brcm,bcm96348gw-11) - status_led="96348GW-11:green:power" - ;; - bt,home-hub-2-a) - status_led="HOMEHUB2A:green:upgrading" - status_led2="HOMEHUB2A:blue:upgrading" - ;; - bt,voyager-2110) - status_led="V2110:power:green" - ;; - comtrend,ar-5315u) - status_led="AR-5315u:green:power" - ;; - comtrend,ar-5381u) - status_led="AR-5381u:green:power" - ;; - comtrend,ar-5387un) - status_led="AR-5387un:green:power" - ;; - comtrend,ct-536plus) - status_led="CT536_CT5621:green:power" - ;; - comtrend,vr-3025u) - status_led="VR-3025u:green:power" - ;; - comtrend,vr-3025un) - status_led="VR-3025un:green:power" - ;; - comtrend,vr-3026e) - status_led="VR-3026e:green:power" - ;; - comtrend,wap-5813n) - status_led="WAP-5813n:green:power" - ;; - d-link,dsl-2640b-b) - status_led="D-4P-W:green:power" - ;; - d-link,dsl-274xb-c2|\ - d-link,dsl-274xb-f1) - status_led="dsl-274xb:green:power" - ;; - d-link,dsl-275xb-d1) - status_led="dsl-275xb:green:power" - ;; - dynalink,rta770bw) - status_led="RTA770BW:green:diag" - ;; - dynalink,rta770w) - status_led="RTA770W:green:diag" - ;; - huawei,echolife-hg520v) - status_led="HW520:green:net" - ;; - huawei,echolife-hg553) - status_led="HW553:blue:power" - ;; - huawei,echolife-hg556a-a|\ - huawei,echolife-hg556a-b|\ - huawei,echolife-hg556a-c) - status_led="HW556:red:power" - ;; - huawei,echolife-hg655b) - status_led="HW65x:green:power" - ;; - inventel,livebox-1) - status_led="Livebox1:red:adsl-fail-power" - ;; - netgear,cvg834g) - status_led="CVG834G:green:power" - ;; - netgear,dgnd3700-v1) - status_led="DGND3700v1_3800B:green:power" - ;; - netgear,evg2000) - status_led="EVG2000:green:power" - ;; - nucom,r5010un-v2) - status_led="R5010UNv2:green:power" - ;; - observa,vh4032n) - status_led="VH4032N:blue:power" - ;; - sagem,fast-2504n) - status_led="fast2504n:green:ok" - ;; - sagem,fast-2704n) - status_led2="F@ST2704N:red:power" - ;; - sagem,fast-2704-v2) - status_led="F@ST2704V2:green:power" - ;; - sercomm,ad1018-nor) - status_led="AD1018:green:power" - ;; - sky,sr102) - status_led="SR102:white:power" - status_led2="SR102:red:power" - ;; - t-com,speedport-w-303v) - status_led="spw303v:green:power+adsl" - ;; - t-com,speedport-w-500v) - status_led="SPW500V:green:power" - ;; - tecom,gw6200) - status_led="GW6200:green:line1" - status_led2="GW6200:green:tel" - ;; - telsey,cpva642) - status_led="CPVA642:green:power:" - ;; - zyxel,p870hw-51a-v2) - status_led="P870HW-51a:green:power" - ;; - esac - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - done) - if [ "${status_led/power}" != "$status_led" ]; then - status_led_on - else - status_led_off - fi - ;; - esac -} diff --git a/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts b/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts index 2b25d009b3..0cde89f7af 100644 --- a/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts +++ b/target/linux/bcm63xx/dts/bcm3368-netgear-cvg834g.dts @@ -8,6 +8,13 @@ model = "Netgear CVG834G"; compatible = "netgear,cvg834g", "brcm,bcm3368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -16,7 +23,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "CVG834G:green:power"; gpios = <&gpio1 5 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts b/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts index e47822af89..7f8cf1ae71 100644 --- a/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts +++ b/target/linux/bcm63xx/dts/bcm63168-sky-sr102.dts @@ -8,6 +8,13 @@ model = "SKY SR102"; compatible = "sky,sr102", "brcm,bcm63168", "brcm,bcm63268"; + aliases { + led-boot = &led_power_white; + led-failsafe = &led_power_white; + led-running = &led_power_white; + led-upgrade = &led_power_white; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -50,7 +57,7 @@ label = "SR102:white:inet"; gpios = <&pinctrl 5 0>; }; - power_white { + led_power_white: power_white { label = "SR102:white:power"; gpios = <&pinctrl 6 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts b/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts index d1085e7eed..c8e814526b 100644 --- a/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts +++ b/target/linux/bcm63xx/dts/bcm6318-comtrend-ar-5315u.dts @@ -8,6 +8,13 @@ model = "Comtrend AR-5315u"; compatible = "comtrend,ar-5315u", "brcm,bcm6318"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -41,7 +48,7 @@ label = "AR-5315u:green:wps"; gpios = <&pinctrl 0 1>; }; - power_green { + led_power_green: power_green { label = "AR-5315u:green:power"; gpios = <&pinctrl 1 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts b/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts index cf5b296cb7..b22f5891cd 100644 --- a/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts +++ b/target/linux/bcm63xx/dts/bcm6318-d-link-dsl-275xb-d1.dts @@ -8,6 +8,13 @@ model = "D-Link DSL-2750B/DSL-2751 rev D1"; compatible = "d-link,dsl-275xb-d1", "brcm,bcm6318"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -44,7 +51,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "dsl-275xb:green:power"; gpios = <&pinctrl 3 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts b/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts index f09310e2bb..d4b0b31ef2 100644 --- a/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts +++ b/target/linux/bcm63xx/dts/bcm6318-sagem-fast-2704n.dts @@ -8,6 +8,13 @@ model = "Sagem F@st 2704N"; compatible = "sagem,fast-2704n", "brcm,bcm6318"; + aliases { + led-boot = &led_power_red; + led-failsafe = &led_power_red; + led-running = &led_power_red; + led-upgrade = &led_power_red; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -76,7 +83,7 @@ label = "F@ST2704N:green:dsl"; gpios = <&pinctrl 10 1>; }; - power_red { + led_power_red: power_red { label = "F@ST2704N:red:power"; gpios = <&pinctrl 11 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts index 814274b611..cc556372bf 100644 --- a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts +++ b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n.dts @@ -8,6 +8,13 @@ model = "ADB P.DG A4001N"; compatible = "adb,a4001n", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -45,7 +52,7 @@ label = "A4001N:red:power"; gpios = <&pinctrl 4 0>; }; - power_green { + led_power_green: power_green { label = "A4001N:green:power"; gpios = <&pinctrl 8 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts index e58f865589..8c8b4566a3 100644 --- a/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts +++ b/target/linux/bcm63xx/dts/bcm6328-adb-a4001n1.dts @@ -8,6 +8,13 @@ model = "ADB P.DG A4001N1"; compatible = "adb,a4001n1", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -45,7 +52,7 @@ label = "A4001N1:green:ppp"; gpios = <&pinctrl 3 1>; }; - power_green { + led_power_green: power_green { label = "A4001N1:green:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts index 6fbac7d461..0e301425c6 100644 --- a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts +++ b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm963281tan.dts @@ -8,6 +8,13 @@ model = "Broadcom bcm963281TAN reference board"; compatible = "brcm,bcm963281tan", "brcm,bcm6328"; + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -20,7 +27,7 @@ label = "963281TAN::internet"; gpios = <&pinctrl 1 1>; }; - power { + led_power: power { label = "963281TAN::power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts index a0a6c9ec54..be02005a02 100644 --- a/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts +++ b/target/linux/bcm63xx/dts/bcm6328-brcm-bcm96328avng.dts @@ -8,6 +8,13 @@ model = "Broadcom BCM96328avng reference board"; compatible = "brcm,bcm96328avng", "brcm,bcm6328"; + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -24,7 +31,7 @@ label = "96328avng::dsl"; gpios = <&pinctrl 3 1>; }; - power { + led_power: power { label = "96328avng::power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts index e336024913..e8a5d79dd3 100644 --- a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts +++ b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5381u.dts @@ -8,6 +8,13 @@ model = "Comtrend AR-5381u"; compatible = "comtrend,ar-5381u", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ label = "AR-5381u:green:inet"; gpios = <&pinctrl 3 1>; }; - power_green { + led_power_green: power_green { label = "AR-5381u:green:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts index 209eda37f4..e1199d2e66 100644 --- a/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts +++ b/target/linux/bcm63xx/dts/bcm6328-comtrend-ar-5387un.dts @@ -8,6 +8,13 @@ model = "Comtrend AR-5387un"; compatible = "comtrend,ar-5387un", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -42,7 +49,7 @@ label = "AR-5387un:green:inet"; gpios = <&pinctrl 7 0>; }; - power_green { + led_power_green: power_green { label = "AR-5387un:green:power"; gpios = <&pinctrl 8 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts b/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts index f3fab05062..25b833b0ec 100644 --- a/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts +++ b/target/linux/bcm63xx/dts/bcm6328-d-link-dsl-274xb-f1.dts @@ -8,6 +8,13 @@ model = "D-Link DSL-2740B/DSL-2741B rev F1"; compatible = "d-link,dsl-274xb-f1", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -52,7 +59,7 @@ label = "dsl-274xb:green:dsl"; gpios = <&pinctrl 3 1>; }; - power_green { + led_power_green: power_green { label = "dsl-274xb:green:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts index 5084bd8877..7bf0a64d18 100644 --- a/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts +++ b/target/linux/bcm63xx/dts/bcm6328-nucom-r5010un-v2.dts @@ -8,12 +8,18 @@ model = "NuCom R5010UN v2"; compatible = "nucom,r5010un-v2", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; - keys { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -50,7 +56,7 @@ label = "R5010UNv2:green:dsl"; gpios = <&pinctrl 3 1>; }; - power_green { + led_power_green: power_green { label = "R5010UNv2:green:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts b/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts index d00d8fb4e5..268aebf824 100644 --- a/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts +++ b/target/linux/bcm63xx/dts/bcm6328-sagem-fast-2704-v2.dts @@ -8,6 +8,13 @@ model = "Sagem F@st 2704 V2"; compatible = "sagem,fast-2704-v2", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -56,7 +63,7 @@ label = "F@ST2704V2:green:dsl"; gpios = <&pinctrl 3 1>; }; - power_green { + led_power_green: power_green { label = "F@ST2704V2:green:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts b/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts index 36899a4cc0..0d2679c08c 100644 --- a/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts +++ b/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts @@ -8,6 +8,13 @@ model = "Sercomm AD1018 (SPI flash mod)"; compatible = "sercomm,ad1018-nor", "brcm,bcm6328"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -73,7 +80,7 @@ label = "AD1018:green:internet"; }; - power_green@8 { + led_power_green: power_green@8 { reg = <8>; active-low; label = "AD1018:green:power"; diff --git a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts index f678762c86..877d321423 100644 --- a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts +++ b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770bw.dts @@ -8,6 +8,13 @@ model = "Siemens Gigaset SE515"; compatible = "dynalink,rta770bw", "brcm,bcm6345"; + aliases { + led-boot = &led_diag; + led-failsafe = &led_diag; + led-running = &led_diag; + led-upgrade = &led_diag; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -40,7 +47,7 @@ gpios = <&gpio0 8 0>; }; - diag { + led_diag: diag { label = "RTA770BW:green:diag"; gpios = <&gpio0 10 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts index ad0e7ce27d..d9efff961f 100644 --- a/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts +++ b/target/linux/bcm63xx/dts/bcm6345-dynalink-rta770w.dts @@ -8,6 +8,13 @@ model = "Dynalink RTA770W"; compatible = "dynalink,rta770w", "brcm,bcm6345"; + aliases { + led-boot = &led_diag; + led-failsafe = &led_diag; + led-running = &led_diag; + led-upgrade = &led_diag; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -40,7 +47,7 @@ gpios = <&gpio0 8 0>; }; - diag { + led_diag: diag { label = "RTA770W:green:diag"; gpios = <&gpio0 10 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts b/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts index bf7b4a3ec4..408afaa878 100644 --- a/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts +++ b/target/linux/bcm63xx/dts/bcm6348-asmax-ar-1004g.dts @@ -8,6 +8,13 @@ model = "ASMAX AR 1004g"; compatible = "asmax,ar-1004g", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "AR1004G:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts index aeda3c2659..47e0c8fb5c 100644 --- a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts +++ b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw-11.dts @@ -8,6 +8,13 @@ model = "Broadcom BCM96348GW-11 reference board"; compatible = "brcm,bcm96348gw-11", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "96348GW-11:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts index 61a0a3dd5c..fa94068595 100644 --- a/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts +++ b/target/linux/bcm63xx/dts/bcm6348-brcm-bcm96348gw.dts @@ -8,6 +8,13 @@ model = "Broadcom BCM96348GW reference board"; compatible = "brcm,bcm96348gw", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "96348GW:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts b/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts index 1eac7e3745..6c2c24f2a4 100644 --- a/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts +++ b/target/linux/bcm63xx/dts/bcm6348-bt-voyager-2110.dts @@ -8,6 +8,13 @@ model = "BT Voyager 2110"; compatible = "bt,voyager-2110", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "V2110:green:power"; gpios = <&pinctrl 0 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts b/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts index ead9bc3a20..f0486d1967 100644 --- a/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts +++ b/target/linux/bcm63xx/dts/bcm6348-comtrend-ct-536plus.dts @@ -8,6 +8,13 @@ model = "Comtrend CT-536+/CT-5621T"; compatible = "comtrend,ct-536plus", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "CT536_CT5621:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts b/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts index 4213822a3e..8991a76e3e 100644 --- a/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts +++ b/target/linux/bcm63xx/dts/bcm6348-d-link-dsl-2640b-b.dts @@ -8,6 +8,13 @@ model = "D-Link DSL-2640B rev B2"; compatible = "d-link,dsl-2640b-b", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "D-4P-W:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts b/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts index 6e80675ff7..70c955fdc7 100644 --- a/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts +++ b/target/linux/bcm63xx/dts/bcm6348-inventel-livebox-1.dts @@ -8,6 +8,13 @@ model = "Inventel Livebox 1"; compatible = "inventel,livebox-1", "brcm,bcm6348"; + aliases { + led-boot = &led_red_adsl_fail; + led-failsafe = &led_red_adsl_fail; + led-running = &led_red_adsl_fail; + led-upgrade = &led_red_adsl_fail; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -37,7 +44,7 @@ leds { compatible = "gpio-leds"; - red_adsl_fail { + led_red_adsl_fail: red_adsl_fail { label = "Livebox1:red:adsl-fail-power"; gpios = <&pinctrl 0 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts b/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts index 8b0d1cacfd..981e21ff2e 100644 --- a/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts +++ b/target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts @@ -8,6 +8,13 @@ model = "T-Com Speedport W 500V"; compatible = "t-com,speedport-w-500v", "brcm,bcm6348"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "SPW500V:green:power"; gpios = <&pinctrl 0 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts b/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts index c86cbf9203..f985059207 100644 --- a/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts +++ b/target/linux/bcm63xx/dts/bcm6348-tecom-gw6200.dts @@ -8,6 +8,13 @@ model = "TECOM GW6200"; compatible = "tecom,gw6200", "brcm,bcm6348"; + aliases { + led-boot = &led_line1_green; + led-failsafe = &led_line1_green; + led-running = &led_line1_green; + led-upgrade = &led_line1_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - line1_green { + led_line1_green: line1_green { label = "GW6200:green:line1"; gpios = <&pinctrl 4 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts b/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts index 351b2945d3..092e070406 100644 --- a/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts +++ b/target/linux/bcm63xx/dts/bcm6358-bt-home-hub-2-a.dts @@ -8,6 +8,13 @@ model = "BT Home Hub 2.0 Type A"; compatible = "bt,home-hub-2-a", "brcm,bcm6358"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_upgrading_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -54,7 +61,7 @@ label = "HOMEHUB2A:red:power"; }; - led@1 { + led_power_green: led@1 { reg = <0>; active-low; label = "HOMEHUB2A:green:power"; @@ -127,7 +134,7 @@ label = "HOMEHUB2A:red:upgrading"; }; - led@13 { + led_upgrading_green: led@13 { reg = <13>; active-low; label = "HOMEHUB2A:green:upgrading"; diff --git a/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts b/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts index 6897378fe8..b508a29f43 100644 --- a/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts +++ b/target/linux/bcm63xx/dts/bcm6358-d-link-dsl-274xb-c2.dts @@ -8,6 +8,13 @@ model = "D-Link DSL-2740B/DSL-2741B rev C2/3"; compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ label = "dsl-274xb:red:power"; gpios = <&pinctrl 4 1>; }; - power_green { + led_power_green: power_green { label = "dsl-274xb:green:power"; gpios = <&pinctrl 5 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts index d23066866e..c73981b47b 100644 --- a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts +++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg553.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG553"; compatible = "huawei,echolife-hg553", "brcm,bcm6358"; + aliases { + led-boot = &led_power_blue; + led-failsafe = &led_power_blue; + led-running = &led_power_blue; + led-upgrade = &led_power_blue; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -37,7 +44,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_blue: power_blue { label = "HW553:blue:power"; gpios = <&pinctrl 4 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts index 1827e8e235..25f771cd28 100644 --- a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts +++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-a.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG556a (version A)"; compatible = "huawei,echolife-hg556a-a", "brcm,bcm6358"; + aliases { + led-boot = &led_power_red; + led-failsafe = &led_power_red; + led-running = &led_power_red; + led-upgrade = &led_power_red; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -63,7 +70,7 @@ label = "HW556:red:dsl"; gpios = <&pinctrl 2 1>; }; - power_red { + led_power_red: power_red { label = "HW556:red:power"; gpios = <&pinctrl 3 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts index fa804bef9e..f608fa5709 100644 --- a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts +++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-b.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG556a (version B)"; compatible = "huawei,echolife-hg556a-b", "brcm,bcm6358"; + aliases { + led-boot = &led_power_red; + led-failsafe = &led_power_red; + led-running = &led_power_red; + led-upgrade = &led_power_red; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -63,7 +70,7 @@ label = "HW556:red:dsl"; gpios = <&pinctrl 2 1>; }; - power_red { + led_power_red: power_red { label = "HW556:red:power"; gpios = <&pinctrl 3 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts index 5ed847baab..afb18e666f 100644 --- a/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts +++ b/target/linux/bcm63xx/dts/bcm6358-huawei-echolife-hg556a-c.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG556a (version C)"; compatible = "huawei,echolife-hg556a-c", "brcm,bcm6358"; + aliases { + led-boot = &led_power_red; + led-failsafe = &led_power_red; + led-running = &led_power_red; + led-upgrade = &led_power_red; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -63,7 +70,7 @@ label = "HW556:red:dsl"; gpios = <&pinctrl 2 1>; }; - power_red { + led_power_red: power_red { label = "HW556:red:power"; gpios = <&pinctrl 3 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts b/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts index 4aed5f0eb6..28a515d2fb 100644 --- a/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts +++ b/target/linux/bcm63xx/dts/bcm6358-t-com-speedport-w-303v.dts @@ -8,6 +8,13 @@ model = "T-Com Speedport W 303V"; compatible = "t-com,speedport-w-303v", "brcm,bcm6358"; + aliases { + led-boot = &led_power_adsl_green; + led-failsafe = &led_power_adsl_green; + led-running = &led_power_adsl_green; + led-upgrade = &led_power_adsl_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -49,7 +56,7 @@ label = "spw303v:green:ppp"; gpios = <&pinctrl 5 1>; }; - power_adsl_green { + led_power_adsl_green: power_adsl_green { label = "spw303v:green:power+adsl"; gpios = <&pinctrl 22 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts b/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts index e422912297..9d7422145a 100644 --- a/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts +++ b/target/linux/bcm63xx/dts/bcm6358-telsey-cpva642.dts @@ -8,6 +8,13 @@ model = "Telsey CPVA642-type (CPA-ZNTE60T)"; compatible = "telsey,cpva642", "brcm,bcm6358"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -65,7 +72,7 @@ label = "CPVA642:green:link"; gpios = <&pinctrl 10 1>; }; - power_green { + led_power_green: power_green { label = "CPVA642:green:power"; gpios = <&pinctrl 11 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts b/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts index 5809b6da4e..4aa805e574 100644 --- a/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts +++ b/target/linux/bcm63xx/dts/bcm6359-huawei-echolife-hg520v.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG520v"; compatible = "huawei,echolife-hg520v", "brcm,bcm6359", "brcm,bcm6358"; + aliases { + led-boot = &led_inet_green; + led-failsafe = &led_inet_green; + led-running = &led_inet_green; + led-upgrade = &led_inet_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -30,7 +37,7 @@ leds { compatible = "gpio-leds"; - inet_green { + led_inet_green: inet_green { label = "HW520:green:net"; gpios = <&pinctrl 32 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts b/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts index db8ce7318f..84f7455f95 100644 --- a/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts +++ b/target/linux/bcm63xx/dts/bcm6362-sagem-fast-2504n.dts @@ -8,6 +8,13 @@ model = "Sagem F@st 2504N"; compatible = "sagem,fast-2504n", "brcm,bcm6362"; + aliases { + led-boot = &led_ok_green; + led-failsafe = &led_ok_green; + led-running = &led_ok_green; + led-upgrade = &led_ok_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -50,7 +57,7 @@ label = "fast2504n:red:internet"; gpios = <&pinctrl 26 1>; }; - ok_green { + led_ok_green: ok_green { label = "fast2504n:green:ok"; gpios = <&pinctrl 28 1>; }; diff --git a/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts b/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts index 05198a1c9a..3b11ce30d9 100644 --- a/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts +++ b/target/linux/bcm63xx/dts/bcm6368-actiontec-r1000h.dts @@ -8,6 +8,13 @@ model = "Actiontec R1000H"; compatible = "actiontec,r1000h", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -47,7 +54,7 @@ gpios = <&pinctrl 21 1>; }; - power_green { + led_power_green: power_green { label = "R1000H:green:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts b/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts index df9dc718e1..5b514796cf 100644 --- a/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts +++ b/target/linux/bcm63xx/dts/bcm6368-adb-av4202n.dts @@ -9,6 +9,13 @@ model = "ADB P.DG AV4202N"; compatible = "adb,av4202n", "brcm,bcm6368"; + aliases { + led-boot = &led_power_white; + led-failsafe = &led_power_white; + led-running = &led_power_white; + led-upgrade = &led_power_white; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ leds { compatible = "gpio-leds"; - power_white { + led_power_white: power_white { label = "AV4202N:white:power"; gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts index 248ec1d73d..6083e8e9bb 100644 --- a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts +++ b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts @@ -8,6 +8,13 @@ model = "Comtrend VR-3025u"; compatible = "comtrend,vr-3025u", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ label = "VR-3025u:green:inet"; gpios = <&pinctrl 5 0>; }; - power_green { + led_power_green: power_green { label = "VR-3025u:green:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts index ac1f896434..1431cf5bd5 100644 --- a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts +++ b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025un.dts @@ -8,6 +8,13 @@ model = "Comtrend VR-3025un"; compatible = "comtrend,vr-3025un", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ label = "VR-3025un:green:inet"; gpios = <&pinctrl 5 0>; }; - power_green { + led_power_green: power_green { label = "VR-3025un:green:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts index 8048d131a2..3948195e21 100644 --- a/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts +++ b/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts @@ -8,6 +8,13 @@ model = "Comtrend VR-3026e"; compatible = "comtrend,vr-3026e", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -38,7 +45,7 @@ label = "VR-3026e:green:inet"; gpios = <&pinctrl 5 0>; }; - power_green { + led_power_green: power_green { label = "VR-3026e:green:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts b/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts index 3f855bf0c9..0fcac83e7f 100644 --- a/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts +++ b/target/linux/bcm63xx/dts/bcm6368-huawei-echolife-hg655b.dts @@ -8,6 +8,13 @@ model = "Huawei EchoLife HG655b"; compatible = "huawei,echolife-hg655b", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -57,7 +64,7 @@ label = "HW65x:green:usb"; gpios = <&pinctrl 14 1>; }; - power_green { + led_power_green: power_green { label = "HW65x:green:power"; gpios = <&pinctrl 22 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts b/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts index 0354d8eddd..9f4040b96e 100644 --- a/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts +++ b/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts @@ -8,6 +8,13 @@ model = "Netgear DGND3700v1/DGND3800B"; compatible = "netgear,dgnd3700-v1", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -76,7 +83,7 @@ label = "DGND3700v1_3800B:green:lan"; gpios = <&pinctrl 23 1>; }; - power_green { + led_power_green: power_green { label = "DGND3700v1_3800B:green:power"; gpios = <&pinctrl 24 1>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts b/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts index 48f35b16e7..573bec743f 100644 --- a/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts +++ b/target/linux/bcm63xx/dts/bcm6368-observa-vh4032n.dts @@ -8,6 +8,13 @@ model = "Observa VH4032N"; compatible = "observa,vh4032n", "brcm,bcm6368"; + aliases { + led-boot = &led_power_blue; + led-failsafe = &led_power_blue; + led-running = &led_power_blue; + led-upgrade = &led_power_blue; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -53,7 +60,7 @@ label = "VH4032N:red:hspa"; gpios = <&pinctrl 12 1>; }; - power_blue { + led_power_blue: power_blue { label = "VH4032N:blue:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts b/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts index c123832803..2edb802c60 100644 --- a/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts +++ b/target/linux/bcm63xx/dts/bcm6368-zyxel-p870hw-51a-v2.dts @@ -8,6 +8,13 @@ model = "Zyxel P870HW-51a v2"; compatible = "zyxel,p870hw-51a-v2", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -37,7 +44,7 @@ leds { compatible = "gpio-leds"; - power_green { + led_power_green: power_green { label = "P870HW-51a:green:power"; gpios = <&pinctrl 0 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts b/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts index c6db2721de..e0e24c0182 100644 --- a/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts +++ b/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts @@ -8,6 +8,13 @@ model = "Comtrend WAP-5813n"; compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -48,7 +55,7 @@ label = "WAP-5813n:green:inet"; gpios = <&pinctrl 5 0>; }; - power_green { + led_power_green: power_green { label = "WAP-5813n:green:power"; gpios = <&pinctrl 22 0>; default-state = "on"; diff --git a/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts b/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts index 93d4792740..902caa7f3a 100644 --- a/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts +++ b/target/linux/bcm63xx/dts/bcm6369-netgear-evg2000.dts @@ -8,6 +8,13 @@ model = "Netgear EVG2000"; compatible = "netgear,evg2000", "brcm,bcm6369", "brcm,bcm6368"; + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; @@ -57,7 +64,7 @@ label = "EVG2000:green:usb"; gpios = <&pinctrl 15 1>; }; - power_green { + led_power_green: power_green { label = "EVG2000:green:power"; gpios = <&pinctrl 22 1>; default-state = "on"; |