diff options
Diffstat (limited to 'target/linux')
7 files changed, 78 insertions, 84 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0009-spi-qup-Fix-block-mode-to-work-correctly.patch b/target/linux/ipq806x/patches-4.9/0009-spi-qup-Fix-block-mode-to-work-correctly.patch index 2f316b1a6d..e9e22b8290 100644 --- a/target/linux/ipq806x/patches-4.9/0009-spi-qup-Fix-block-mode-to-work-correctly.patch +++ b/target/linux/ipq806x/patches-4.9/0009-spi-qup-Fix-block-mode-to-work-correctly.patch @@ -49,11 +49,11 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org> - int idx, shift, w_size; - - w_size = controller->w_size; +- +- while (controller->rx_bytes < xfer->len) { + int i, shift, num_bytes; + u32 word; -- while (controller->rx_bytes < xfer->len) { -- - state = readl_relaxed(controller->base + QUP_OPERATIONAL); - if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY)) - break; @@ -95,16 +95,20 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org> - int idx, w_size; + u32 remainder, words_per_block, num_words; + bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK; -+ + +- w_size = controller->w_size; + remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes, + controller->w_size); + words_per_block = controller->in_blk_sz >> 2; -+ + +- while (controller->tx_bytes < xfer->len) { + do { + /* ACK by clearing service flag */ + writel_relaxed(QUP_OP_IN_SERVICE_FLAG, + controller->base + QUP_OPERATIONAL); -+ + +- state = readl_relaxed(controller->base + QUP_OPERATIONAL); +- if (state & QUP_OP_OUT_FIFO_FULL) + if (is_block_mode) { + num_words = (remainder > words_per_block) ? + words_per_block : remainder; @@ -112,19 +116,15 @@ Signed-off-by: Andy Gross <andy.gross@linaro.org> + if (!spi_qup_is_flag_set(controller, + QUP_OP_IN_FIFO_NOT_EMPTY)) + break; - -- w_size = controller->w_size; ++ + num_words = 1; + } + + /* read up to the maximum transfer size available */ + spi_qup_read_from_fifo(controller, xfer, num_words); - -- while (controller->tx_bytes < xfer->len) { ++ + remainder -= num_words; - -- state = readl_relaxed(controller->base + QUP_OPERATIONAL); -- if (state & QUP_OP_OUT_FIFO_FULL) ++ + /* if block mode, check to see if next block is available */ + if (is_block_mode && !spi_qup_is_flag_set(controller, + QUP_OP_IN_BLOCK_READ_REQ)) diff --git a/target/linux/ipq806x/patches-4.9/0012-spi-qup-refactor-spi_qup_io_config-in-two-functions.patch b/target/linux/ipq806x/patches-4.9/0012-spi-qup-refactor-spi_qup_io_config-in-two-functions.patch index 7beb5d9701..c88dd9b0ec 100644 --- a/target/linux/ipq806x/patches-4.9/0012-spi-qup-refactor-spi_qup_io_config-in-two-functions.patch +++ b/target/linux/ipq806x/patches-4.9/0012-spi-qup-refactor-spi_qup_io_config-in-two-functions.patch @@ -67,10 +67,14 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> - /* must be zero for BLOCK and BAM */ - writel_relaxed(0, controller->base + QUP_MX_READ_CNT); - writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT); -- ++ else ++ controller->mode = QUP_IO_M_MODE_BLOCK; + - if (!controller->qup_v1) { - void __iomem *input_cnt; -- ++ return 0; ++} + - input_cnt = controller->base + QUP_MX_INPUT_CNT; - /* - * for DMA transfers, both QUP_MX_INPUT_CNT and @@ -82,19 +86,13 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> - writel_relaxed(0, input_cnt); - else - writel_relaxed(n_words, input_cnt); -+ else -+ controller->mode = QUP_IO_M_MODE_BLOCK; -+ -+ return 0; -+} - +/* prep qup for another spi transaction of specific type */ +static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct spi_qup *controller = spi_master_get_devdata(spi->master); + u32 config, iomode, control; + unsigned long flags; -+ + + reinit_completion(&controller->done); + reinit_completion(&controller->dma_tx_done); + diff --git a/target/linux/ipq806x/patches-4.9/0014-spi-qup-allow-block-mode-to-generate-multiple-transa.patch b/target/linux/ipq806x/patches-4.9/0014-spi-qup-allow-block-mode-to-generate-multiple-transa.patch index 6c275f61d3..19b36aaadd 100644 --- a/target/linux/ipq806x/patches-4.9/0014-spi-qup-allow-block-mode-to-generate-multiple-transa.patch +++ b/target/linux/ipq806x/patches-4.9/0014-spi-qup-allow-block-mode-to-generate-multiple-transa.patch @@ -173,37 +173,37 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> + qup->n_words = SPI_MAX_XFER; + else + qup->n_words = n_words % SPI_MAX_XFER; -+ + +- if (qup->mode == QUP_IO_M_MODE_FIFO) +- spi_qup_write(qup, xfer); + if (qup->tx_buf && offset) + qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER; -+ + +- ret = spi_qup_set_state(qup, QUP_STATE_RUN); +- if (ret) { +- dev_warn(qup->dev, "cannot set RUN state\n"); +- return ret; +- } + if (qup->rx_buf && offset) + qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER; -+ + +- if (!wait_for_completion_timeout(&qup->done, timeout)) +- return -ETIMEDOUT; + /* if the transaction is small enough, we need + * to fallback to FIFO mode */ + if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32))) + qup->mode = QUP_IO_M_MODE_FIFO; - -- if (qup->mode == QUP_IO_M_MODE_FIFO) -- spi_qup_write(qup, xfer); ++ + ret = spi_qup_io_config(spi, xfer); + if (ret) + return ret; - -- ret = spi_qup_set_state(qup, QUP_STATE_RUN); -- if (ret) { -- dev_warn(qup->dev, "cannot set RUN state\n"); -- return ret; -- } ++ + ret = spi_qup_set_state(qup, QUP_STATE_RUN); + if (ret) { + dev_warn(qup->dev, "cannot set RUN state\n"); + return ret; + } - -- if (!wait_for_completion_timeout(&qup->done, timeout)) -- return -ETIMEDOUT; ++ + ret = spi_qup_set_state(qup, QUP_STATE_PAUSE); + if (ret) { + dev_warn(qup->dev, "cannot set PAUSE state\n"); diff --git a/target/linux/ipq806x/patches-4.9/0016-spi-qup-allow-mulitple-DMA-transactions-per-spi-xfer.patch b/target/linux/ipq806x/patches-4.9/0016-spi-qup-allow-mulitple-DMA-transactions-per-spi-xfer.patch index de324ffd6e..ce59d492e2 100644 --- a/target/linux/ipq806x/patches-4.9/0016-spi-qup-allow-mulitple-DMA-transactions-per-spi-xfer.patch +++ b/target/linux/ipq806x/patches-4.9/0016-spi-qup-allow-mulitple-DMA-transactions-per-spi-xfer.patch @@ -44,58 +44,54 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> - ret = spi_qup_io_config(spi, xfer); - if (ret) - return ret; -- ++ rx_sgl = xfer->rx_sg.sgl; ++ tx_sgl = xfer->tx_sg.sgl; + - /* before issuing the descriptors, set the QUP to run */ - ret = spi_qup_set_state(qup, QUP_STATE_RUN); - if (ret) { - dev_warn(qup->dev, "cannot set RUN state\n"); - return ret; - } -- ++ do { ++ int rx_nents = 0, tx_nents = 0; + - if (!qup->qup_v1) { - if (xfer->rx_buf) - rx_done = spi_qup_dma_done; -- ++ if (rx_sgl) { ++ rx_nents = sg_nents_for_len(rx_sgl, SPI_MAX_XFER); ++ if (rx_nents < 0) ++ rx_nents = sg_nents(rx_sgl); + - if (xfer->tx_buf) - tx_done = spi_qup_dma_done; - } -- ++ qup->n_words = spi_qup_sgl_get_size(rx_sgl, rx_nents) / ++ qup->w_size; ++ } + - if (xfer->rx_buf) { - ret = spi_qup_prep_sg(master, xfer->rx_sg.sgl, - xfer->rx_sg.nents, DMA_DEV_TO_MEM, - rx_done, &qup->done); - if (ret) - return ret; -+ rx_sgl = xfer->rx_sg.sgl; -+ tx_sgl = xfer->tx_sg.sgl; ++ if (tx_sgl) { ++ tx_nents = sg_nents_for_len(tx_sgl, SPI_MAX_XFER); ++ if (tx_nents < 0) ++ tx_nents = sg_nents(tx_sgl); - dma_async_issue_pending(master->dma_rx); - } -+ do { -+ int rx_nents = 0, tx_nents = 0; ++ qup->n_words = spi_qup_sgl_get_size(tx_sgl, tx_nents) / ++ qup->w_size; ++ } - if (xfer->tx_buf) { - ret = spi_qup_prep_sg(master, xfer->tx_sg.sgl, - xfer->tx_sg.nents, DMA_MEM_TO_DEV, - tx_done, &qup->dma_tx_done); -+ if (rx_sgl) { -+ rx_nents = sg_nents_for_len(rx_sgl, SPI_MAX_XFER); -+ if (rx_nents < 0) -+ rx_nents = sg_nents(rx_sgl); -+ -+ qup->n_words = spi_qup_sgl_get_size(rx_sgl, rx_nents) / -+ qup->w_size; -+ } -+ -+ if (tx_sgl) { -+ tx_nents = sg_nents_for_len(tx_sgl, SPI_MAX_XFER); -+ if (tx_nents < 0) -+ tx_nents = sg_nents(tx_sgl); -+ -+ qup->n_words = spi_qup_sgl_get_size(tx_sgl, tx_nents) / -+ qup->w_size; -+ } -+ + + ret = spi_qup_io_config(spi, xfer); if (ret) @@ -109,17 +105,22 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> + dev_warn(qup->dev, "cannot set RUN state\n"); + return ret; + } -+ + +- if (xfer->rx_buf && !wait_for_completion_timeout(&qup->done, timeout)) +- return -ETIMEDOUT; + if (!qup->qup_v1) { + if (rx_sgl) { + rx_done = spi_qup_dma_done; + } -+ + +- if (xfer->tx_buf && !wait_for_completion_timeout(&qup->dma_tx_done, timeout)) +- ret = -ETIMEDOUT; + if (tx_sgl) { + tx_done = spi_qup_dma_done; + } + } -+ + +- return ret; + if (rx_sgl) { + ret = spi_qup_prep_sg(master, rx_sgl, rx_nents, + DMA_DEV_TO_MEM, rx_done, @@ -149,17 +150,12 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> + pr_emerg(" tx timed out\n"); + return -ETIMEDOUT; + } - -- if (xfer->rx_buf && !wait_for_completion_timeout(&qup->done, timeout)) -- return -ETIMEDOUT; ++ + for (; rx_sgl && rx_nents--; rx_sgl = sg_next(rx_sgl)); + for (; tx_sgl && tx_nents--; tx_sgl = sg_next(tx_sgl)); - -- if (xfer->tx_buf && !wait_for_completion_timeout(&qup->dma_tx_done, timeout)) -- ret = -ETIMEDOUT; ++ + } while (rx_sgl || tx_sgl); - -- return ret; ++ + return 0; } diff --git a/target/linux/ipq806x/patches-4.9/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.9/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch index bd79a89014..5c22b792f7 100644 --- a/target/linux/ipq806x/patches-4.9/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch +++ b/target/linux/ipq806x/patches-4.9/012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch @@ -85,7 +85,7 @@ More majordomo info at http://vger.kernel.org/majordomo-info.html + }; --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig -@@ -2,6 +2,9 @@ +@@ -2,6 +2,9 @@ config QCOM_GDSC bool select PM_GENERIC_DOMAINS if PM @@ -95,7 +95,7 @@ More majordomo info at http://vger.kernel.org/majordomo-info.html config COMMON_CLK_QCOM tristate "Support for Qualcomm's clock controllers" depends on OF -@@ -9,6 +12,19 @@ +@@ -9,6 +12,19 @@ config COMMON_CLK_QCOM select REGMAP_MMIO select RESET_CONTROLLER @@ -117,7 +117,7 @@ More majordomo info at http://vger.kernel.org/majordomo-info.html select QCOM_GDSC --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile -@@ -29,3 +29,4 @@ +@@ -29,3 +29,4 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm896 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o diff --git a/target/linux/ipq806x/patches-4.9/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch b/target/linux/ipq806x/patches-4.9/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch index 8a38ead567..4933ffb024 100644 --- a/target/linux/ipq806x/patches-4.9/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch +++ b/target/linux/ipq806x/patches-4.9/012-2-clk-qcom-Add-support-for-RPM-Clocks.patch @@ -54,9 +54,9 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> depends on COMMON_CLK_QCOM && QCOM_SMD_RPM --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile -@@ -23,3 +23,4 @@ obj-$(CONFIG_MSM_GCC_8974) += gcc-msm897 - obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o +@@ -30,3 +30,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o + obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o +obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o --- /dev/null diff --git a/target/linux/ipq806x/patches-4.9/999-dts.patch b/target/linux/ipq806x/patches-4.9/999-dts.patch index 3977d0b5d9..abbaad593f 100644 --- a/target/linux/ipq806x/patches-4.9/999-dts.patch +++ b/target/linux/ipq806x/patches-4.9/999-dts.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -573,92 +573,61 @@ +@@ -573,92 +573,61 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += \ am43x-epos-evm.dtb \ @@ -281,7 +281,10 @@ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; -+ + +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-bus-width = <8>; + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; @@ -306,10 +309,7 @@ + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; - -- nand-ecc-strength = <4>; -- nand-ecc-step-size = <512>; -- nand-bus-width = <8>; ++ + fixed-link { + speed = <1000>; + full-duplex; |