diff options
Diffstat (limited to 'target/linux')
21 files changed, 1869 insertions, 1232 deletions
diff --git a/target/linux/bcm53xx/patches-3.10/101-bcma-add-some-more-core-names.patch b/target/linux/bcm53xx/patches-3.10/101-bcma-add-some-more-core-names.patch deleted file mode 100644 index 64bf3435b1..0000000000 --- a/target/linux/bcm53xx/patches-3.10/101-bcma-add-some-more-core-names.patch +++ /dev/null @@ -1,73 +0,0 @@ -bcma: add some more core names - -These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC -with two Cortex A9 cores. - -bcma: bus0: Found chip with id 0xCF12, rev 0x00 and package 0x02 -bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0) -bcma: bus0: Core 1 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0) -bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) -bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) -bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) -bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) -bcma: bus0: Core 6 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) -bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) -bcma: bus0: Core 8 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0) -bcma: bus0: Core 9 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0) -bcma: bus0: Core 10 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) -bcma: bus0: Core 11 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) -bcma: bus0: Core 12 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) -bcma: bus0: Core 13 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) -bcma: bus0: Core 14 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0) -bcma: bus0: Core 15 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0) -bcma: bus0: Core 16 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/scan.c | 12 ++++++++++++ - include/linux/bcma/bcma.h | 12 ++++++++++++ - 2 files changed, 24 insertions(+) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -32,6 +32,18 @@ static const struct bcma_device_id_name - { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, - { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, - { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, -+ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, -+ { BCMA_CORE_DMA, "DMA" }, -+ { BCMA_CORE_SDIO3, "SDIO3" }, -+ { BCMA_CORE_USB20, "USB 2.0" }, -+ { BCMA_CORE_USB30, "USB 3.0" }, -+ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, -+ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, -+ { BCMA_CORE_ROM, "ROM" }, -+ { BCMA_CORE_NAND, "NAND flash controller" }, -+ { BCMA_CORE_QSPI, "SPI flash controller" }, -+ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, -+ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, - { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, - { BCMA_CORE_ALTA, "ALTA (I2S)" }, - { BCMA_CORE_INVALID, "Invalid" }, ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -72,7 +72,19 @@ struct bcma_host_ops { - /* Core-ID values. */ - #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ - #define BCMA_CORE_4706_CHIPCOMMON 0x500 -+#define BCMA_CORE_PCIEG2 0x501 -+#define BCMA_CORE_DMA 0x502 -+#define BCMA_CORE_SDIO3 0x503 -+#define BCMA_CORE_USB20 0x504 -+#define BCMA_CORE_USB30 0x505 -+#define BCMA_CORE_A9JTAG 0x506 -+#define BCMA_CORE_DDR23 0x507 -+#define BCMA_CORE_ROM 0x508 -+#define BCMA_CORE_NAND 0x509 -+#define BCMA_CORE_QSPI 0x50A -+#define BCMA_CORE_CHIPCOMMON_B 0x50B /* ChipcommonB core */ - #define BCMA_CORE_4706_SOC_RAM 0x50E -+#define BCMA_CORE_ARMCA9 0x510 - #define BCMA_CORE_4706_MAC_GBIT 0x52D - #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ - #define BCMA_CORE_ALTA 0x534 /* I2S core */ diff --git a/target/linux/bcm53xx/patches-3.10/102-bcma-make-it-possible-to-select-SoC-support-without-.patch b/target/linux/bcm53xx/patches-3.10/102-bcma-make-it-possible-to-select-SoC-support-without-.patch deleted file mode 100644 index 4d0fd5f408..0000000000 --- a/target/linux/bcm53xx/patches-3.10/102-bcma-make-it-possible-to-select-SoC-support-without-.patch +++ /dev/null @@ -1,29 +0,0 @@ -bcma: make it possible to select SoC support without mips - -To make it possible to use the SoC host interface with ARM SoCs do not -depend on the MIPS driver any more. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/Kconfig | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -36,8 +36,14 @@ config BCMA_DRIVER_PCI_HOSTMODE - PCI core hostmode operation (external PCI bus). - - config BCMA_HOST_SOC -- bool -- depends on BCMA_DRIVER_MIPS -+ bool "Support for BCMA in a SoC" -+ depends on BCMA -+ help -+ Host interface for a Broadcom AIX bus directly mapped into -+ the memory. This only works with the Broadcom SoCs from the -+ BCM47XX line. -+ -+ If unsure, say N - - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" diff --git a/target/linux/bcm53xx/patches-3.10/103-bcma-add-constants-for-new-ARM-based-SoCs.patch b/target/linux/bcm53xx/patches-3.10/103-bcma-add-constants-for-new-ARM-based-SoCs.patch deleted file mode 100644 index 6714533c0b..0000000000 --- a/target/linux/bcm53xx/patches-3.10/103-bcma-add-constants-for-new-ARM-based-SoCs.patch +++ /dev/null @@ -1,23 +0,0 @@ -bcma: add constants for new ARM based SoCs - -These are the chipIDs of some ARM based SoCs from the BCM47xx line. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - include/linux/bcma/bcma.h | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -189,6 +189,11 @@ struct bcma_host_ops { - #define BCMA_PKG_ID_BCM5357 11 - #define BCMA_CHIP_ID_BCM53572 53572 - #define BCMA_PKG_ID_BCM47188 9 -+#define BCMA_CHIP_ID_BCM4707 53010 -+#define BCMA_PKG_ID_BCM4707 1 -+#define BCMA_PKG_ID_BCM4708 2 -+#define BCMA_PKG_ID_BCM4709 0 -+#define BCMA_CHIP_ID_BCM53018 53018 - - /* Board types (on PCI usually equals to the subsystem dev id) */ - /* BCM4313 */ diff --git a/target/linux/bcm53xx/patches-3.10/104-bcma-return-correct-error-code-when-bus-scan-failed.patch b/target/linux/bcm53xx/patches-3.10/104-bcma-return-correct-error-code-when-bus-scan-failed.patch deleted file mode 100644 index c6e8aca62a..0000000000 --- a/target/linux/bcm53xx/patches-3.10/104-bcma-return-correct-error-code-when-bus-scan-failed.patch +++ /dev/null @@ -1,20 +0,0 @@ -bcma: return correct error code when bus scan failed - -It is better to return the actual error code than just -1. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/main.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -237,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b - err = bcma_bus_scan(bus); - if (err) { - bcma_err(bus, "Failed to scan: %d\n", err); -- return -1; -+ return err; - } - - /* Early init CC core */ diff --git a/target/linux/bcm53xx/patches-3.10/105-bcma-fix-handling-of-big-addrl.patch b/target/linux/bcm53xx/patches-3.10/105-bcma-fix-handling-of-big-addrl.patch deleted file mode 100644 index 3d261b99e1..0000000000 --- a/target/linux/bcm53xx/patches-3.10/105-bcma-fix-handling-of-big-addrl.patch +++ /dev/null @@ -1,81 +0,0 @@ -bcma: fix handling of big addrl - -The return value of bcma_erom_get_addr_desc() is a unsigned value and it -could wrap around in the two complement writing. This happens for one -core in the BCM4708 SoC. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/bcma/scan.c | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -213,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct - return ent; - } - --static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, -+static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, - u32 type, u8 port) - { - u32 addrl, addrh, sizel, sizeh = 0; -@@ -225,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc - ((ent & SCAN_ADDR_TYPE) != type) || - (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { - bcma_erom_push_ent(eromptr); -- return -EINVAL; -+ return (u32)-EINVAL; - } - - addrl = ent & SCAN_ADDR_ADDR; -@@ -273,7 +273,7 @@ static int bcma_get_next_core(struct bcm - struct bcma_device_id *match, int core_num, - struct bcma_device *core) - { -- s32 tmp; -+ u32 tmp; - u8 i, j; - s32 cia, cib; - u8 ports[2], wrappers[2]; -@@ -351,11 +351,11 @@ static int bcma_get_next_core(struct bcm - * the main register space for the core - */ - tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -- if (tmp <= 0) { -+ if (tmp == 0 || IS_ERR_VALUE(tmp)) { - /* Try again to see if it is a bridge */ - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_BRIDGE, 0); -- if (tmp <= 0) { -+ if (tmp == 0 || IS_ERR_VALUE(tmp)) { - return -EILSEQ; - } else { - bcma_info(bus, "Bridge found\n"); -@@ -369,7 +369,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SLAVE, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: slave port %d " - * "has %d descriptors\n", i, j); */ -@@ -386,7 +386,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_MWRAP, i); -- if (tmp < 0) { -+ if (IS_ERR_VALUE(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * "has %d descriptors\n", i, j); */ -@@ -404,7 +404,7 @@ static int bcma_get_next_core(struct bcm - for (j = 0; ; j++) { - tmp = bcma_erom_get_addr_desc(bus, eromptr, - SCAN_ADDR_TYPE_SWRAP, i + hack); -- if (tmp < 0) { -+ if (IS_ERR_VALUE(tmp)) { - /* no more entries for port _i_ */ - /* pr_debug("erom: master wrapper %d " - * has %d descriptors\n", i, j); */ diff --git a/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch index aabaf29471..748710f6f8 100644 --- a/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch +++ b/target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch @@ -7,12 +7,12 @@ This prevents the options from being delete with make kernel_oldconfig. +++ b/drivers/bcma/Kconfig @@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE config BCMA_HOST_SOC - bool - depends on BCMA_DRIVER_MIPS + bool "Support for BCMA in a SoC" + depends on BCMA + select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD - - config BCMA_DRIVER_MIPS - bool "BCMA Broadcom MIPS core driver" + help + Host interface for a Broadcom AIX bus directly mapped into + the memory. This only works with the Broadcom SoCs from the --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -146,6 +146,7 @@ config SSB_SFLASH diff --git a/target/linux/generic/patches-3.10/020-ssb_update.patch b/target/linux/generic/patches-3.10/020-ssb_update.patch index 3287186b5d..1605705251 100644 --- a/target/linux/generic/patches-3.10/020-ssb_update.patch +++ b/target/linux/generic/patches-3.10/020-ssb_update.patch @@ -1,6 +1,13 @@ --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig -@@ -144,7 +144,7 @@ config SSB_SFLASH +@@ -138,13 +138,13 @@ config SSB_DRIVER_MIPS + + config SSB_SFLASH + bool "SSB serial flash support" +- depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + # Assumption: We are on embedded, if we compile the MIPS core. config SSB_EMBEDDED bool @@ -68,28 +75,32 @@ u32 id, id2; switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommo +@@ -131,10 +145,20 @@ int ssb_sflash_init(struct ssb_chipcommo return -ENOTSUPP; } +- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", +- e->name, e->blocksize, e->numblocks); +- +- pr_err("Serial flash support is not implemented yet!\n"); + sflash->window = SSB_FLASH2; + sflash->blocksize = e->blocksize; + sflash->numblocks = e->numblocks; + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + - pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", - e->name, e->blocksize, e->numblocks); - ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, e->blocksize, e->numblocks); ++ + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ + ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start + + sflash->size; + ssb_sflash_dev.dev.platform_data = sflash; -+ - pr_err("Serial flash support is not implemented yet!\n"); - return -ENOTSUPP; +- return -ENOTSUPP; ++ return 0; + } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -553,6 +553,14 @@ static int ssb_devices_register(struct s diff --git a/target/linux/generic/patches-3.10/025-bcma_backport.patch b/target/linux/generic/patches-3.10/025-bcma_backport.patch index a4ae800b16..93702af7fc 100644 --- a/target/linux/generic/patches-3.10/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.10/025-bcma_backport.patch @@ -8,6 +8,23 @@ config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" +@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE + PCI core hostmode operation (external PCI bus). + + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -22,6 +22,8 @@ @@ -316,6 +333,15 @@ static void bcma_release_core_dev(struct device *dev) { struct bcma_device *core = container_of(dev, struct bcma_device, dev); +@@ -218,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_bus_scan(bus); + if (err) { + bcma_err(bus, "Failed to scan: %d\n", err); +- return -1; ++ return err; + } + + /* Early init CC core */ --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -72,12 +72,12 @@ fail: @@ -484,7 +510,27 @@ } --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -144,6 +144,7 @@ struct bcma_host_ops { +@@ -72,7 +72,19 @@ struct bcma_host_ops { + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ + #define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B + #define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 + #define BCMA_CORE_4706_MAC_GBIT 0x52D + #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ + #define BCMA_CORE_ALTA 0x534 /* I2S core */ +@@ -144,6 +156,7 @@ struct bcma_host_ops { /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 @@ -492,6 +538,18 @@ #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa +@@ -176,6 +189,11 @@ struct bcma_host_ops { + #define BCMA_PKG_ID_BCM5357 11 + #define BCMA_CHIP_ID_BCM53572 53572 + #define BCMA_PKG_ID_BCM47188 9 ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 + + /* Board types (on PCI usually equals to the subsystem dev id) */ + /* BCM4313 */ --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -330,6 +330,8 @@ @@ -577,3 +635,354 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + +-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) + { + u32 v; + int i; +@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc + } + } + +-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) + { + int max_retries = 10; + u16 ret = 0; +@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc + return ret; + } + +-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, + u8 address, u16 data) + { + int max_retries = 10; +@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + ++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, ++ u8 address, u16 data) ++{ ++ bcma_pcie_mdio_write(pc, device, address, data); ++ return bcma_pcie_mdio_read(pc, device, address); ++} ++ + /************************************************** + * Workarounds. + **************************************************/ +@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s + } + } + ++static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) ++{ ++ u16 data; ++ ++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { ++ data = up ? 0x74 : 0x7C; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { ++ data = up ? 0x75 : 0x7D; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } ++} ++ + /************************************************** + * Init. + **************************************************/ +@@ -262,7 +288,7 @@ out: + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); + +-void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) + { + u32 w; + +@@ -274,4 +300,33 @@ void bcma_core_pci_extend_L1timer(struct + bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); ++ ++void bcma_core_pci_up(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_power_save(pc, true); ++ ++ bcma_core_pci_extend_L1timer(pc, true); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_up); ++ ++void bcma_core_pci_down(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_extend_L1timer(pc, false); ++ ++ bcma_core_pci_power_save(pc, false); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_down); +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -581,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI + int bcma_core_pci_plat_dev_init(struct pci_dev *dev) + { + struct bcma_drv_pci_host *pc_host; ++ int readrq; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ +@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p + dev->irq = bcma_core_irq(pc_host->pdev->core); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + ++ readrq = pcie_get_readrq(dev); ++ if (readrq > 128) { ++ pr_info("change PCIe max read request size from %i to 128\n", readrq); ++ pcie_set_readrq(dev, 128); ++ } + return 0; + } + EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -32,6 +32,18 @@ static const struct bcma_device_id_name + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, + { BCMA_CORE_INVALID, "Invalid" }, +@@ -201,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct + return ent; + } + +-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, + u32 type, u8 port) + { + u32 addrl, addrh, sizel, sizeh = 0; +@@ -213,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -257,11 +269,13 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -339,11 +353,11 @@ static int bcma_get_next_core(struct bcm + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); +@@ -357,7 +371,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ +@@ -374,7 +388,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -392,7 +406,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -181,10 +181,31 @@ struct pci_dev; + + #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + ++#define BCMA_CORE_PCI_ ++ ++/* MDIO devices (SERDES modules) */ ++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 ++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 ++#define BCMA_CORE_PCI_MDIO_BLK0 0x800 ++#define BCMA_CORE_PCI_MDIO_BLK1 0x801 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A ++#define BCMA_CORE_PCI_MDIO_BLK2 0x802 ++#define BCMA_CORE_PCI_MDIO_BLK3 0x803 ++#define BCMA_CORE_PCI_MDIO_BLK4 0x804 ++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ ++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 ++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 ++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 ++ + /* PCIE Root Capability Register bits (Host mode only) */ + #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + + struct bcma_drv_pci; ++struct bcma_bus; + + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host { +@@ -219,7 +240,8 @@ struct bcma_drv_pci { + extern void bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); +-extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++extern void bcma_core_pci_up(struct bcma_bus *bus); ++extern void bcma_core_pci_down(struct bcma_bus *bus); + + extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); + extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +@@ -679,27 +679,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en + return mode == BCMA_CLKMODE_FAST; + } + +-void ai_pci_up(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); +-} +- +-/* Unconfigure and/or apply various WARs when going down */ +-void ai_pci_down(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); +-} +- + /* Enable BT-COEX & Ex-PA for 4313 */ + void ai_epa_4313war(struct si_pub *sih) + { +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st + extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); + extern bool ai_deviceremoved(struct si_pub *sih); + +-extern void ai_pci_down(struct si_pub *sih); +-extern void ai_pci_up(struct si_pub *sih); +- + /* Enable Ex-PA for 4313 */ + extern void ai_epa_4313war(struct si_pub *sih); + +--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -4667,7 +4667,7 @@ static int brcms_b_attach(struct brcms_c + brcms_c_coredisable(wlc_hw); + + /* Match driver "down" state */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + + /* turn off pll and xtal to match driver "down" state */ + brcms_b_xtal(wlc_hw, OFF); +@@ -5010,12 +5010,12 @@ static int brcms_b_up_prep(struct brcms_ + */ + if (brcms_b_radio_read_hwdisabled(wlc_hw)) { + /* put SB PCI in down state again */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + return -ENOMEDIUM; + } + +- ai_pci_up(wlc_hw->sih); ++ bcma_core_pci_up(wlc_hw->d11core->bus); + + /* reset the d11 core */ + brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); +@@ -5212,7 +5212,7 @@ static int brcms_b_down_finish(struct br + + /* turn off primary xtal and pll */ + if (!wlc_hw->noreset) { +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + } + } diff --git a/target/linux/generic/patches-3.10/026-bcma_pcie_up_down.patch b/target/linux/generic/patches-3.10/026-bcma_pcie_up_down.patch deleted file mode 100644 index 4dbf685b94..0000000000 --- a/target/linux/generic/patches-3.10/026-bcma_pcie_up_down.patch +++ /dev/null @@ -1,167 +0,0 @@ -bcma patch adding bcma_core_pci_up() and bcma_core_pci_down(), this gets -called by b43 and brcmsmac - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s - } - } - -+static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -+{ -+ u16 data; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+ - /************************************************** - * Init. - **************************************************/ -@@ -262,7 +288,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +300,38 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_power_save(pc, true); -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+ -+ if ((pc->core->id.rev == 18 || pc->core->id.rev == 19) && -+ bus->boardinfo.vendor != PCI_VENDOR_ID_APPLE) { -+ pcie_set_readrq(bus->host_pci, 128); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+ -+ bcma_core_pci_power_save(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -181,10 +181,31 @@ struct pci_dev; - - #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 - -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -219,7 +240,8 @@ struct bcma_drv_pci { - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch index 51b23b03f6..14ff3c5b0d 100644 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -36,7 +36,7 @@ +config SSB_SFLASH + bool "SSB serial flash support" -+ depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + # Assumption: We are on embedded, if we compile the MIPS core. @@ -587,7 +587,7 @@ +EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate); --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,166 @@ +@@ -0,0 +1,164 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface @@ -741,8 +741,8 @@ + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + -+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", -+ e->name, e->blocksize, e->numblocks); ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, e->blocksize, e->numblocks); + + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ @@ -750,9 +750,7 @@ + sflash->size; + ssb_sflash_dev.dev.platform_data = sflash; + -+ pr_err("Serial flash support is not implemented yet!\n"); -+ -+ return -ENOTSUPP; ++ return 0; +} --- a/drivers/ssb/driver_extif.c +++ b/drivers/ssb/driver_extif.c diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch index 05d461d74a..5ff64f54f8 100644 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -11,7 +11,7 @@ p->iotype = UPIO_MEM; --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig -@@ -26,10 +26,11 @@ config BCMA_HOST_PCI_POSSIBLE +@@ -26,16 +26,23 @@ config BCMA_HOST_PCI_POSSIBLE config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE @@ -24,7 +24,21 @@ help PCI core hostmode operation (external PCI bus). -@@ -46,6 +47,33 @@ config BCMA_DRIVER_MIPS + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" +@@ -46,6 +53,33 @@ config BCMA_DRIVER_MIPS If unsure, say N @@ -2047,7 +2061,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -16,120 +17,124 @@ +@@ -16,120 +17,131 @@ * R/W ops. **************************************************/ @@ -2074,7 +2088,8 @@ } -#endif - static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; @@ -2108,7 +2123,8 @@ } } - static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) { - const u16 mdio_control = 0x128; - const u16 mdio_data = 0x12C; @@ -2168,7 +2184,8 @@ return ret; } - static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, +-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, u8 address, u16 data) { - const u16 mdio_control = 0x128; @@ -2221,10 +2238,17 @@ } - pcicore_write32(pc, mdio_control, 0); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); ++} ++ ++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, ++ u8 address, u16 data) ++{ ++ bcma_pcie_mdio_write(pc, device, address, data); ++ return bcma_pcie_mdio_read(pc, device, address); } /************************************************** -@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct +@@ -138,88 +150,127 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -2277,12 +2301,18 @@ + (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); + pcicore_write16(pc, regoff, val16); + } -+} -+ + } + +-/************************************************** +- * Init. +- **************************************************/ +- +-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ +/* Needs to happen when coming out of 'standby'/'hibernate' */ +static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) -+{ + { +- bcma_pcicore_serdes_workaround(pc); + u16 val16; + uint regoff; + @@ -2296,23 +2326,13 @@ + } } - /************************************************** - * Init. - **************************************************/ - --static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) -+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) - { -+ bcma_core_pci_fixcfg(pc); - bcma_pcicore_serdes_workaround(pc); -+ bcma_core_pci_config_fixup(pc); - } - -static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) --{ ++static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) + { - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; -- ++ u16 data; + - chipid_top = (bus->chipinfo.id & 0xFF00); - if (chipid_top != 0x4700 && - chipid_top != 0x5300) @@ -2322,17 +2342,39 @@ - if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) - return false; -#endif /* CONFIG_SSB_DRIVER_PCICORE */ -- ++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { ++ data = up ? 0x74 : 0x7C; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { ++ data = up ? 0x75 : 0x7D; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } ++} + -#if 0 - /* TODO: on BCMA we use address from EROM instead of magic formula */ - u32 tmp; - return !mips_busprobe32(tmp, (bus->mmio + - (pc->core->core_index * BCMA_CORE_SIZE))); -#endif -- ++/************************************************** ++ * Init. ++ **************************************************/ + - return true; --} -- ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++{ ++ bcma_core_pci_fixcfg(pc); ++ bcma_pcicore_serdes_workaround(pc); ++ bcma_core_pci_config_fixup(pc); + } + -void bcma_core_pci_init(struct bcma_drv_pci *pc) +void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) { @@ -2377,12 +2419,12 @@ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); if (err) goto out; -@@ -236,3 +261,17 @@ out: +@@ -236,3 +287,46 @@ out: return err; } EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); + -+void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) +{ + u32 w; + @@ -2394,10 +2436,39 @@ + bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); +} -+EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); ++ ++void bcma_core_pci_up(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_power_save(pc, true); ++ ++ bcma_core_pci_extend_L1timer(pc, true); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_up); ++ ++void bcma_core_pci_down(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_extend_L1timer(pc, false); ++ ++ bcma_core_pci_power_save(pc, false); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_down); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,616 @@ +@@ -2,13 +2,622 @@ * Broadcom specific AMBA * PCI Core in hostmode * @@ -2983,6 +3054,7 @@ +int bcma_core_pci_plat_dev_init(struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; ++ int readrq; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ @@ -2997,6 +3069,11 @@ + dev->irq = bcma_core_irq(pc_host->pdev->core); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + ++ readrq = pcie_get_readrq(dev); ++ if (readrq > 128) { ++ pr_info("change PCIe max read request size from %i to 128\n", readrq); ++ pcie_set_readrq(dev, 128); ++ } + return 0; +} +EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); @@ -3335,8 +3412,9 @@ err = bcma_bus_scan(bus); if (err) { - pr_err("Failed to scan: %d\n", err); +- return -1; + bcma_err(bus, "Failed to scan: %d\n", err); - return -1; ++ return err; } + /* Early init CC core */ @@ -3486,7 +3564,7 @@ } --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -19,15 +19,27 @@ struct bcma_device_id_name { +@@ -19,15 +19,39 @@ struct bcma_device_id_name { u16 id; const char *name; }; @@ -3504,6 +3582,18 @@ + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, { BCMA_CORE_INVALID, "Invalid" }, @@ -3516,7 +3606,7 @@ { BCMA_CORE_ETHERNET, "Fast Ethernet" }, { BCMA_CORE_V90, "V90" }, { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, -@@ -44,7 +56,6 @@ struct bcma_device_id_name bcma_device_n +@@ -44,7 +68,6 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_PHY_A, "PHY A" }, { BCMA_CORE_PHY_B, "PHY B" }, { BCMA_CORE_PHY_G, "PHY G" }, @@ -3524,7 +3614,7 @@ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, -@@ -58,15 +69,11 @@ struct bcma_device_id_name bcma_device_n +@@ -58,15 +81,11 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_PHY_N, "PHY N" }, { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, @@ -3540,7 +3630,7 @@ { BCMA_CORE_MAC_GBIT, "GBit MAC" }, { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, -@@ -77,18 +84,45 @@ struct bcma_device_id_name bcma_device_n +@@ -77,18 +96,45 @@ struct bcma_device_id_name bcma_device_n { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, @@ -3583,17 +3673,17 @@ + break; + default: + return "UNKNOWN"; - } ++ } + + for (i = 0; i < size; i++) { + if (names[i].id == id->id) + return names[i].name; -+ } + } + return "UNKNOWN"; } -@@ -105,19 +139,19 @@ static void bcma_scan_switch_core(struct +@@ -105,19 +151,19 @@ static void bcma_scan_switch_core(struct addr); } @@ -3616,7 +3706,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -127,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_ +@@ -127,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ return ent; } @@ -3633,7 +3723,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); bcma_erom_push_ent(eromptr); -@@ -143,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b +@@ -143,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); } @@ -3642,7 +3732,7 @@ { u32 ent; while (1) { -@@ -157,7 +191,7 @@ static void bcma_erom_skip_component(str +@@ -157,7 +203,7 @@ static void bcma_erom_skip_component(str bcma_erom_push_ent(eromptr); } @@ -3651,16 +3741,25 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -167,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct +@@ -167,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct return ent; } -static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, u32 type, u8 port) { u32 addrl, addrh, sizel, sizeh = 0; -@@ -212,6 +246,17 @@ static struct bcma_device *bcma_find_cor +@@ -179,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -212,11 +258,24 @@ static struct bcma_device *bcma_find_cor return NULL; } @@ -3675,10 +3774,18 @@ + return NULL; +} + ++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) ++ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, struct bcma_device_id *match, int core_num, struct bcma_device *core) -@@ -252,11 +297,15 @@ static int bcma_get_next_core(struct bcm + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -252,11 +311,15 @@ static int bcma_get_next_core(struct bcm /* check if component is a core at all */ if (wrappers[0] + wrappers[1] == 0) { @@ -3699,7 +3806,7 @@ } if (bcma_erom_is_bridge(bus, eromptr)) { -@@ -286,6 +335,23 @@ static int bcma_get_next_core(struct bcm +@@ -286,19 +349,36 @@ static int bcma_get_next_core(struct bcm return -EILSEQ; } @@ -3707,11 +3814,11 @@ + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); -+ if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); -+ if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); @@ -3723,7 +3830,13 @@ /* get & parse slave ports */ for (i = 0; i < ports[1]; i++) { for (j = 0; ; j++) { -@@ -298,7 +364,7 @@ static int bcma_get_next_core(struct bcm + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ break; } else { if (i == 0 && j == 0) @@ -3732,7 +3845,25 @@ } } } -@@ -353,6 +419,7 @@ static int bcma_get_next_core(struct bcm +@@ -308,7 +388,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -326,7 +406,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ +@@ -353,6 +433,7 @@ static int bcma_get_next_core(struct bcm void bcma_init_bus(struct bcma_bus *bus) { s32 tmp; @@ -3740,7 +3871,7 @@ if (bus->init_done) return; -@@ -363,9 +430,12 @@ void bcma_init_bus(struct bcma_bus *bus) +@@ -363,9 +444,12 @@ void bcma_init_bus(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); @@ -3756,7 +3887,7 @@ bus->init_done = true; } -@@ -392,9 +462,12 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -392,9 +476,12 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, erombase); while (eromptr < eromend) { @@ -3771,7 +3902,7 @@ INIT_LIST_HEAD(&core->list); core->bus = bus; -@@ -409,25 +482,28 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -409,25 +496,28 @@ int bcma_bus_scan(struct bcma_bus *bus) } else if (err == -ESPIPE) { break; } @@ -3808,7 +3939,7 @@ } int __init bcma_bus_scan_early(struct bcma_bus *bus, -@@ -467,21 +543,21 @@ int __init bcma_bus_scan_early(struct bc +@@ -467,21 +557,21 @@ int __init bcma_bus_scan_early(struct bc else if (err == -ESPIPE) break; else if (err < 0) @@ -4557,12 +4688,24 @@ enum bcma_clkmode { BCMA_CLKMODE_FAST, BCMA_CLKMODE_DYNAMIC, -@@ -65,6 +71,13 @@ struct bcma_host_ops { +@@ -65,6 +71,25 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B +#define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 +#define BCMA_CORE_4706_MAC_GBIT 0x52D +#define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ +#define BCMA_CORE_ALTA 0x534 /* I2S core */ @@ -4571,7 +4714,7 @@ #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 -@@ -121,10 +134,104 @@ struct bcma_host_ops { +@@ -121,10 +146,109 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ @@ -4618,6 +4761,11 @@ +#define BCMA_PKG_ID_BCM5357 11 +#define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 + +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ @@ -4676,7 +4824,7 @@ struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; -@@ -136,8 +243,10 @@ struct bcma_device { +@@ -136,8 +260,10 @@ struct bcma_device { bool dev_registered; u8 core_index; @@ -4687,7 +4835,7 @@ u32 wrap; void __iomem *io_addr; -@@ -175,6 +284,12 @@ int __bcma_driver_register(struct bcma_d +@@ -175,6 +301,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); @@ -4700,7 +4848,7 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -191,14 +306,18 @@ struct bcma_bus { +@@ -191,14 +323,18 @@ struct bcma_bus { struct bcma_chipinfo chipinfo; @@ -4720,7 +4868,7 @@ /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ -@@ -282,6 +401,7 @@ static inline void bcma_maskset16(struct +@@ -282,6 +418,7 @@ static inline void bcma_maskset16(struct bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } @@ -4728,7 +4876,7 @@ extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); -@@ -289,6 +409,7 @@ extern void bcma_core_set_clockmode(stru +@@ -289,6 +426,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -5410,7 +5558,7 @@ /* SBtoPCIx */ #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 -@@ -72,20 +108,120 @@ struct pci_dev; +@@ -72,20 +108,142 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ @@ -5487,10 +5635,31 @@ + +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + ++#define BCMA_CORE_PCI_ ++ ++/* MDIO devices (SERDES modules) */ ++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 ++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 ++#define BCMA_CORE_PCI_MDIO_BLK0 0x800 ++#define BCMA_CORE_PCI_MDIO_BLK1 0x801 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A ++#define BCMA_CORE_PCI_MDIO_BLK2 0x802 ++#define BCMA_CORE_PCI_MDIO_BLK3 0x803 ++#define BCMA_CORE_PCI_MDIO_BLK4 0x804 ++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ ++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 ++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 ++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 ++ +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; ++struct bcma_bus; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { @@ -5526,7 +5695,8 @@ +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); -+extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++extern void bcma_core_pci_up(struct bcma_bus *bus); ++extern void bcma_core_pci_down(struct bcma_bus *bus); + +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); diff --git a/target/linux/generic/patches-3.3/026-bcma_pcie_up_down.patch b/target/linux/generic/patches-3.3/026-bcma_pcie_up_down.patch deleted file mode 100644 index 3f5ab444b7..0000000000 --- a/target/linux/generic/patches-3.3/026-bcma_pcie_up_down.patch +++ /dev/null @@ -1,167 +0,0 @@ -bcma patch adding bcma_core_pci_up() and bcma_core_pci_down(), this gets -called by b43 and brcmsmac - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s - } - } - -+static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -+{ -+ u16 data; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+ - /************************************************** - * Init. - **************************************************/ -@@ -262,7 +288,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +300,38 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_power_save(pc, true); -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+ -+ if ((pc->core->id.rev == 18 || pc->core->id.rev == 19) && -+ bus->boardinfo.vendor != PCI_VENDOR_ID_APPLE) { -+ pcie_set_readrq(bus->host_pci, 128); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+ -+ bcma_core_pci_power_save(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -181,10 +181,31 @@ struct pci_dev; - - #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 - -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -219,7 +240,8 @@ struct bcma_drv_pci { - extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch index 2d134583cf..d6b2f35f02 100644 --- a/target/linux/generic/patches-3.6/020-ssb_update.patch +++ b/target/linux/generic/patches-3.6/020-ssb_update.patch @@ -36,7 +36,7 @@ +config SSB_SFLASH + bool "SSB serial flash support" -+ depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + # Assumption: We are on embedded, if we compile the MIPS core. @@ -531,7 +531,7 @@ +EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate); --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,166 @@ +@@ -0,0 +1,164 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface @@ -685,8 +685,8 @@ + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + -+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", -+ e->name, e->blocksize, e->numblocks); ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, e->blocksize, e->numblocks); + + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ @@ -694,9 +694,7 @@ + sflash->size; + ssb_sflash_dev.dev.platform_data = sflash; + -+ pr_err("Serial flash support is not implemented yet!\n"); -+ -+ return -ENOTSUPP; ++ return 0; +} --- a/drivers/ssb/driver_extif.c +++ b/drivers/ssb/driver_extif.c diff --git a/target/linux/generic/patches-3.6/025-bcma_backport.patch b/target/linux/generic/patches-3.6/025-bcma_backport.patch index 9ad3ce3f53..0e60758458 100644 --- a/target/linux/generic/patches-3.6/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.6/025-bcma_backport.patch @@ -19,7 +19,24 @@ config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" -@@ -48,12 +49,12 @@ config BCMA_DRIVER_MIPS +@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE + PCI core hostmode operation (external PCI bus). + + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" +@@ -48,12 +55,12 @@ config BCMA_DRIVER_MIPS config BCMA_SFLASH bool @@ -34,7 +51,7 @@ default y config BCMA_DRIVER_GMAC_CMN -@@ -65,6 +66,14 @@ config BCMA_DRIVER_GMAC_CMN +@@ -65,6 +72,14 @@ config BCMA_DRIVER_GMAC_CMN If unsure, say N @@ -1608,7 +1625,16 @@ } --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c -@@ -51,7 +51,7 @@ static void bcma_pcie_mdio_set_phy(struc +@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + +-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) + { + u32 v; + int i; +@@ -51,11 +51,11 @@ static void bcma_pcie_mdio_set_phy(struc v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; @@ -1617,7 +1643,12 @@ } } -@@ -92,7 +92,7 @@ static u16 bcma_pcie_mdio_read(struct bc +-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) + { + int max_retries = 10; + u16 ret = 0; +@@ -92,13 +92,13 @@ static u16 bcma_pcie_mdio_read(struct bc ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); break; } @@ -1626,7 +1657,14 @@ } pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); return ret; -@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct + } + +-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, + u8 address, u16 data) + { + int max_retries = 10; +@@ -132,11 +132,18 @@ static void bcma_pcie_mdio_write(struct v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; @@ -1635,6 +1673,87 @@ } pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); } + ++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, ++ u8 address, u16 data) ++{ ++ bcma_pcie_mdio_write(pc, device, address, data); ++ return bcma_pcie_mdio_read(pc, device, address); ++} ++ + /************************************************** + * Workarounds. + **************************************************/ +@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s + } + } + ++static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) ++{ ++ u16 data; ++ ++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { ++ data = up ? 0x74 : 0x7C; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { ++ data = up ? 0x75 : 0x7D; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } ++} ++ + /************************************************** + * Init. + **************************************************/ +@@ -262,7 +288,7 @@ out: + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); + +-void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) + { + u32 w; + +@@ -274,4 +300,33 @@ void bcma_core_pci_extend_L1timer(struct + bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); ++ ++void bcma_core_pci_up(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_power_save(pc, true); ++ ++ bcma_core_pci_extend_L1timer(pc, true); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_up); ++ ++void bcma_core_pci_down(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_extend_L1timer(pc, false); ++ ++ bcma_core_pci_power_save(pc, false); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_down); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -35,11 +35,6 @@ bool __devinit bcma_core_pci_is_in_hostm @@ -1878,7 +1997,15 @@ } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); -@@ -569,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p +@@ -558,6 +582,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI + int bcma_core_pci_plat_dev_init(struct pci_dev *dev) + { + struct bcma_drv_pci_host *pc_host; ++ int readrq; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ +@@ -569,9 +594,14 @@ int bcma_core_pci_plat_dev_init(struct p pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ @@ -1886,8 +2013,15 @@ + dev->irq = bcma_core_irq(pc_host->pdev->core); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ readrq = pcie_get_readrq(dev); ++ if (readrq > 128) { ++ pr_info("change PCIe max read request size from %i to 128\n", readrq); ++ pcie_set_readrq(dev, 128); ++ } return 0; -@@ -588,6 +612,6 @@ int bcma_core_pci_pcibios_map_irq(const + } + EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); +@@ -588,6 +618,6 @@ int bcma_core_pci_pcibios_map_irq(const pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); @@ -2084,8 +2218,12 @@ } int __devinit bcma_bus_register(struct bcma_bus *bus) -@@ -166,6 +240,20 @@ int __devinit bcma_bus_register(struct b - return -1; +@@ -163,9 +237,23 @@ int __devinit bcma_bus_register(struct b + err = bcma_bus_scan(bus); + if (err) { + bcma_err(bus, "Failed to scan: %d\n", err); +- return -1; ++ return err; } + /* Early init CC core */ @@ -2190,7 +2328,26 @@ bcma_info(bus, "Early bus registered\n"); --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -84,6 +84,8 @@ static const struct bcma_device_id_name +@@ -32,6 +32,18 @@ static const struct bcma_device_id_name + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, + { BCMA_CORE_INVALID, "Invalid" }, +@@ -84,6 +96,8 @@ static const struct bcma_device_id_name { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, @@ -2199,7 +2356,7 @@ { BCMA_CORE_DEFAULT, "Default" }, }; -@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct +@@ -137,19 +151,19 @@ static void bcma_scan_switch_core(struct addr); } @@ -2222,7 +2379,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_ +@@ -159,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ return ent; } @@ -2239,7 +2396,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); bcma_erom_push_ent(eromptr); -@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b +@@ -175,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); } @@ -2248,7 +2405,7 @@ { u32 ent; while (1) { -@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str +@@ -189,7 +203,7 @@ static void bcma_erom_skip_component(str bcma_erom_push_ent(eromptr); } @@ -2257,15 +2414,80 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct +@@ -199,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct return ent; } -static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, u32 type, u8 port) { u32 addrl, addrh, sizel, sizeh = 0; +@@ -211,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -255,11 +269,13 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -337,11 +353,11 @@ static int bcma_get_next_core(struct bcm + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); +@@ -355,7 +371,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ +@@ -372,7 +388,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -390,7 +406,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -72,12 +72,12 @@ fail: @@ -2458,7 +2680,27 @@ struct bcma_device; struct bcma_bus; -@@ -134,12 +134,17 @@ struct bcma_host_ops { +@@ -72,7 +72,19 @@ struct bcma_host_ops { + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ + #define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B + #define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 + #define BCMA_CORE_4706_MAC_GBIT 0x52D + #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ + #define BCMA_CORE_ALTA 0x534 /* I2S core */ +@@ -134,12 +146,17 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ @@ -2476,7 +2718,7 @@ #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -@@ -157,6 +162,7 @@ struct bcma_host_ops { +@@ -157,6 +174,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 @@ -2484,7 +2726,7 @@ #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 -@@ -166,7 +172,65 @@ struct bcma_host_ops { +@@ -166,7 +184,70 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 @@ -2493,6 +2735,11 @@ +#define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 + +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ @@ -2550,7 +2797,7 @@ struct bcma_device { struct bcma_bus *bus; -@@ -251,7 +315,7 @@ struct bcma_bus { +@@ -251,7 +332,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; @@ -2559,7 +2806,7 @@ struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; -@@ -345,6 +409,7 @@ extern void bcma_core_set_clockmode(stru +@@ -345,6 +426,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -2929,15 +3176,50 @@ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -179,6 +179,8 @@ struct pci_dev; +@@ -179,10 +179,33 @@ struct pci_dev; #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + ++#define BCMA_CORE_PCI_ ++ ++/* MDIO devices (SERDES modules) */ ++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 ++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 ++#define BCMA_CORE_PCI_MDIO_BLK0 0x800 ++#define BCMA_CORE_PCI_MDIO_BLK1 0x801 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A ++#define BCMA_CORE_PCI_MDIO_BLK2 0x802 ++#define BCMA_CORE_PCI_MDIO_BLK3 0x803 ++#define BCMA_CORE_PCI_MDIO_BLK4 0x804 ++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ ++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 ++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 ++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 ++ /* PCIE Root Capability Register bits (Host mode only) */ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + struct bcma_drv_pci; ++struct bcma_bus; + + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host { +@@ -217,7 +240,8 @@ struct bcma_drv_pci { + extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); +-extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++extern void bcma_core_pci_up(struct bcma_bus *bus); ++extern void bcma_core_pci_down(struct bcma_bus *bus); + + extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); + extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -11,11 +11,13 @@ @@ -2985,26 +3267,45 @@ #endif --- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c -@@ -695,7 +695,7 @@ void ai_pci_up(struct si_pub *sih) - sii = container_of(sih, struct si_info, pub); - - if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) -- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true); -+ bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); +@@ -688,27 +688,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en + return mode == BCMA_CLKMODE_FAST; } - /* Unconfigure and/or apply various WARs when going down */ -@@ -706,7 +706,7 @@ void ai_pci_down(struct si_pub *sih) - sii = container_of(sih, struct si_info, pub); - - if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +-void ai_pci_up(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true); +-} +- +-/* Unconfigure and/or apply various WARs when going down */ +-void ai_pci_down(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) - bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false); -+ bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); - } - +-} +- /* Enable BT-COEX & Ex-PA for 4313 */ + void ai_epa_4313war(struct si_pub *sih) + { --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -4689,7 +4689,7 @@ static int brcms_b_attach(struct brcms_c + brcms_c_coredisable(wlc_hw); + + /* Match driver "down" state */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + + /* turn off pll and xtal to match driver "down" state */ + brcms_b_xtal(wlc_hw, OFF); @@ -5077,7 +5077,7 @@ static int brcms_b_up_prep(struct brcms_ * Configure pci/pcmcia here instead of in brcms_c_attach() * to allow mfg hotswap: down, hotswap (chip power cycle), up. @@ -3014,3 +3315,39 @@ true); /* +@@ -5087,12 +5087,12 @@ static int brcms_b_up_prep(struct brcms_ + */ + if (brcms_b_radio_read_hwdisabled(wlc_hw)) { + /* put SB PCI in down state again */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + return -ENOMEDIUM; + } + +- ai_pci_up(wlc_hw->sih); ++ bcma_core_pci_up(wlc_hw->d11core->bus); + + /* reset the d11 core */ + brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); +@@ -5295,7 +5295,7 @@ static int brcms_b_down_finish(struct br + + /* turn off primary xtal and pll */ + if (!wlc_hw->noreset) { +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + } + } +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st + extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); + extern bool ai_deviceremoved(struct si_pub *sih); + +-extern void ai_pci_down(struct si_pub *sih); +-extern void ai_pci_up(struct si_pub *sih); +- + /* Enable Ex-PA for 4313 */ + extern void ai_epa_4313war(struct si_pub *sih); + diff --git a/target/linux/generic/patches-3.6/026-bcma_pcie_up_down.patch b/target/linux/generic/patches-3.6/026-bcma_pcie_up_down.patch deleted file mode 100644 index 4dbf685b94..0000000000 --- a/target/linux/generic/patches-3.6/026-bcma_pcie_up_down.patch +++ /dev/null @@ -1,167 +0,0 @@ -bcma patch adding bcma_core_pci_up() and bcma_core_pci_down(), this gets -called by b43 and brcmsmac - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s - } - } - -+static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -+{ -+ u16 data; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+ - /************************************************** - * Init. - **************************************************/ -@@ -262,7 +288,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +300,38 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_power_save(pc, true); -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+ -+ if ((pc->core->id.rev == 18 || pc->core->id.rev == 19) && -+ bus->boardinfo.vendor != PCI_VENDOR_ID_APPLE) { -+ pcie_set_readrq(bus->host_pci, 128); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+ -+ bcma_core_pci_power_save(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -181,10 +181,31 @@ struct pci_dev; - - #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 - -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -219,7 +240,8 @@ struct bcma_drv_pci { - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); diff --git a/target/linux/generic/patches-3.8/020-ssb_update.patch b/target/linux/generic/patches-3.8/020-ssb_update.patch index 22dae59498..95a224600b 100644 --- a/target/linux/generic/patches-3.8/020-ssb_update.patch +++ b/target/linux/generic/patches-3.8/020-ssb_update.patch @@ -6,7 +6,7 @@ +config SSB_SFLASH + bool "SSB serial flash support" -+ depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + # Assumption: We are on embedded, if we compile the MIPS core. @@ -179,7 +179,7 @@ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c -@@ -0,0 +1,166 @@ +@@ -0,0 +1,164 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface @@ -333,8 +333,8 @@ + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + -+ pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", -+ e->name, e->blocksize, e->numblocks); ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, e->blocksize, e->numblocks); + + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ @@ -342,9 +342,7 @@ + sflash->size; + ssb_sflash_dev.dev.platform_data = sflash; + -+ pr_err("Serial flash support is not implemented yet!\n"); -+ -+ return -ENOTSUPP; ++ return 0; +} --- a/drivers/ssb/driver_gpio.c +++ b/drivers/ssb/driver_gpio.c diff --git a/target/linux/generic/patches-3.8/025-bcma_backport.patch b/target/linux/generic/patches-3.8/025-bcma_backport.patch index 7373c0281e..2764474890 100644 --- a/target/linux/generic/patches-3.8/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.8/025-bcma_backport.patch @@ -19,6 +19,23 @@ config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" +@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE + PCI core hostmode operation (external PCI bus). + + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -22,6 +22,8 @@ @@ -985,7 +1002,15 @@ /* Enable PCI bridge BAR0 memory & master access */ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -@@ -576,7 +592,7 @@ int bcma_core_pci_plat_dev_init(struct p +@@ -565,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI + int bcma_core_pci_plat_dev_init(struct pci_dev *dev) + { + struct bcma_drv_pci_host *pc_host; ++ int readrq; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ +@@ -576,9 +593,14 @@ int bcma_core_pci_plat_dev_init(struct p pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ @@ -993,8 +1018,15 @@ + dev->irq = bcma_core_irq(pc_host->pdev->core); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ readrq = pcie_get_readrq(dev); ++ if (readrq > 128) { ++ pr_info("change PCIe max read request size from %i to 128\n", readrq); ++ pcie_set_readrq(dev, 128); ++ } return 0; -@@ -595,6 +611,6 @@ int bcma_core_pci_pcibios_map_irq(const + } + EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); +@@ -595,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); @@ -1078,9 +1110,37 @@ #ifdef CONFIG_BCMA_SFLASH if (bus->drv_cc.sflash.present) { err = platform_device_register(&bcma_sflash_dev); +@@ -205,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_bus_scan(bus); + if (err) { + bcma_err(bus, "Failed to scan: %d\n", err); +- return -1; ++ return err; + } + + /* Early init CC core */ --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -84,6 +84,8 @@ static const struct bcma_device_id_name +@@ -32,6 +32,18 @@ static const struct bcma_device_id_name + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, + { BCMA_CORE_INVALID, "Invalid" }, +@@ -84,6 +96,8 @@ static const struct bcma_device_id_name { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, @@ -1089,7 +1149,7 @@ { BCMA_CORE_DEFAULT, "Default" }, }; -@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct +@@ -137,19 +151,19 @@ static void bcma_scan_switch_core(struct addr); } @@ -1112,7 +1172,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_ +@@ -159,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ return ent; } @@ -1129,7 +1189,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); bcma_erom_push_ent(eromptr); -@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b +@@ -175,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); } @@ -1138,7 +1198,7 @@ { u32 ent; while (1) { -@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str +@@ -189,7 +203,7 @@ static void bcma_erom_skip_component(str bcma_erom_push_ent(eromptr); } @@ -1147,15 +1207,80 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct +@@ -199,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct return ent; } -static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, u32 type, u8 port) { u32 addrl, addrh, sizel, sizeh = 0; +@@ -211,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -255,11 +269,13 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -337,11 +353,11 @@ static int bcma_get_next_core(struct bcm + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); +@@ -355,7 +371,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ +@@ -372,7 +388,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -390,7 +406,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -72,12 +72,12 @@ fail: @@ -1331,7 +1456,27 @@ } --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -134,12 +134,17 @@ struct bcma_host_ops { +@@ -72,7 +72,19 @@ struct bcma_host_ops { + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ + #define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B + #define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 + #define BCMA_CORE_4706_MAC_GBIT 0x52D + #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ + #define BCMA_CORE_ALTA 0x534 /* I2S core */ +@@ -134,12 +146,17 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ @@ -1349,10 +1494,16 @@ #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -@@ -173,6 +178,60 @@ struct bcma_host_ops { +@@ -172,6 +189,65 @@ struct bcma_host_ops { + #define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 #define BCMA_PKG_ID_BCM47188 9 - ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 ++ +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ +#define BCMA_BOARD_TYPE_BCM94313BU 0X050F @@ -1406,10 +1557,9 @@ +#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 +/* BCM43142 */ +#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 -+ + struct bcma_device { struct bcma_bus *bus; - struct bcma_device_id id; --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -27,7 +27,7 @@ @@ -1585,15 +1735,50 @@ #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -179,6 +179,8 @@ struct pci_dev; +@@ -179,10 +179,33 @@ struct pci_dev; #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + ++#define BCMA_CORE_PCI_ ++ ++/* MDIO devices (SERDES modules) */ ++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 ++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 ++#define BCMA_CORE_PCI_MDIO_BLK0 0x800 ++#define BCMA_CORE_PCI_MDIO_BLK1 0x801 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A ++#define BCMA_CORE_PCI_MDIO_BLK2 0x802 ++#define BCMA_CORE_PCI_MDIO_BLK3 0x803 ++#define BCMA_CORE_PCI_MDIO_BLK4 0x804 ++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ ++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 ++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 ++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 ++ /* PCIE Root Capability Register bits (Host mode only) */ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + struct bcma_drv_pci; ++struct bcma_bus; + + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host { +@@ -217,7 +240,8 @@ struct bcma_drv_pci { + extern void bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); +-extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++extern void bcma_core_pci_up(struct bcma_bus *bus); ++extern void bcma_core_pci_down(struct bcma_bus *bus); + + extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); + extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -37,6 +37,7 @@ @@ -1604,3 +1789,193 @@ /* BCMA PCI config space registers. */ #define BCMA_PCI_PMCSR 0x44 +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + +-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) + { + u32 v; + int i; +@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc + } + } + +-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) + { + int max_retries = 10; + u16 ret = 0; +@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc + return ret; + } + +-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, + u8 address, u16 data) + { + int max_retries = 10; +@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + ++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, ++ u8 address, u16 data) ++{ ++ bcma_pcie_mdio_write(pc, device, address, data); ++ return bcma_pcie_mdio_read(pc, device, address); ++} ++ + /************************************************** + * Workarounds. + **************************************************/ +@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s + } + } + ++static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) ++{ ++ u16 data; ++ ++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { ++ data = up ? 0x74 : 0x7C; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { ++ data = up ? 0x75 : 0x7D; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } ++} ++ + /************************************************** + * Init. + **************************************************/ +@@ -262,7 +288,7 @@ out: + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); + +-void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) + { + u32 w; + +@@ -274,4 +300,33 @@ void bcma_core_pci_extend_L1timer(struct + bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); ++ ++void bcma_core_pci_up(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_power_save(pc, true); ++ ++ bcma_core_pci_extend_L1timer(pc, true); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_up); ++ ++void bcma_core_pci_down(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_extend_L1timer(pc, false); ++ ++ bcma_core_pci_power_save(pc, false); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_down); +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +@@ -685,27 +685,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en + return mode == BCMA_CLKMODE_FAST; + } + +-void ai_pci_up(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); +-} +- +-/* Unconfigure and/or apply various WARs when going down */ +-void ai_pci_down(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); +-} +- + /* Enable BT-COEX & Ex-PA for 4313 */ + void ai_epa_4313war(struct si_pub *sih) + { +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st + extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); + extern bool ai_deviceremoved(struct si_pub *sih); + +-extern void ai_pci_down(struct si_pub *sih); +-extern void ai_pci_up(struct si_pub *sih); +- + /* Enable Ex-PA for 4313 */ + extern void ai_epa_4313war(struct si_pub *sih); + +--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -4648,7 +4648,7 @@ static int brcms_b_attach(struct brcms_c + brcms_c_coredisable(wlc_hw); + + /* Match driver "down" state */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + + /* turn off pll and xtal to match driver "down" state */ + brcms_b_xtal(wlc_hw, OFF); +@@ -4991,12 +4991,12 @@ static int brcms_b_up_prep(struct brcms_ + */ + if (brcms_b_radio_read_hwdisabled(wlc_hw)) { + /* put SB PCI in down state again */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + return -ENOMEDIUM; + } + +- ai_pci_up(wlc_hw->sih); ++ bcma_core_pci_up(wlc_hw->d11core->bus); + + /* reset the d11 core */ + brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); +@@ -5193,7 +5193,7 @@ static int brcms_b_down_finish(struct br + + /* turn off primary xtal and pll */ + if (!wlc_hw->noreset) { +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + } + } diff --git a/target/linux/generic/patches-3.8/026-bcma_pcie_up_down.patch b/target/linux/generic/patches-3.8/026-bcma_pcie_up_down.patch deleted file mode 100644 index 4dbf685b94..0000000000 --- a/target/linux/generic/patches-3.8/026-bcma_pcie_up_down.patch +++ /dev/null @@ -1,167 +0,0 @@ -bcma patch adding bcma_core_pci_up() and bcma_core_pci_down(), this gets -called by b43 and brcmsmac - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s - } - } - -+static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -+{ -+ u16 data; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+ - /************************************************** - * Init. - **************************************************/ -@@ -262,7 +288,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +300,38 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_power_save(pc, true); -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+ -+ if ((pc->core->id.rev == 18 || pc->core->id.rev == 19) && -+ bus->boardinfo.vendor != PCI_VENDOR_ID_APPLE) { -+ pcie_set_readrq(bus->host_pci, 128); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+ -+ bcma_core_pci_power_save(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -181,10 +181,31 @@ struct pci_dev; - - #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 - -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -219,7 +240,8 @@ struct bcma_drv_pci { - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); diff --git a/target/linux/generic/patches-3.9/020-ssb_update.patch b/target/linux/generic/patches-3.9/020-ssb_update.patch index 9908d69564..0bd050b0ab 100644 --- a/target/linux/generic/patches-3.9/020-ssb_update.patch +++ b/target/linux/generic/patches-3.9/020-ssb_update.patch @@ -1,6 +1,13 @@ --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig -@@ -144,7 +144,7 @@ config SSB_SFLASH +@@ -138,13 +138,13 @@ config SSB_DRIVER_MIPS + + config SSB_SFLASH + bool "SSB serial flash support" +- depends on SSB_DRIVER_MIPS && BROKEN ++ depends on SSB_DRIVER_MIPS + default y + # Assumption: We are on embedded, if we compile the MIPS core. config SSB_EMBEDDED bool @@ -218,28 +225,32 @@ u32 id, id2; switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { -@@ -131,9 +145,21 @@ int ssb_sflash_init(struct ssb_chipcommo +@@ -131,10 +145,20 @@ int ssb_sflash_init(struct ssb_chipcommo return -ENOTSUPP; } +- pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", +- e->name, e->blocksize, e->numblocks); +- +- pr_err("Serial flash support is not implemented yet!\n"); + sflash->window = SSB_FLASH2; + sflash->blocksize = e->blocksize; + sflash->numblocks = e->numblocks; + sflash->size = sflash->blocksize * sflash->numblocks; + sflash->present = true; + - pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", - e->name, e->blocksize, e->numblocks); - ++ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n", ++ e->name, sflash->size / 1024, e->blocksize, e->numblocks); ++ + /* Prepare platform device, but don't register it yet. It's too early, + * malloc (required by device_private_init) is not available yet. */ + ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start + + sflash->size; + ssb_sflash_dev.dev.platform_data = sflash; -+ - pr_err("Serial flash support is not implemented yet!\n"); - return -ENOTSUPP; +- return -ENOTSUPP; ++ return 0; + } --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -167,21 +167,22 @@ static void set_irq(struct ssb_device *d diff --git a/target/linux/generic/patches-3.9/025-bcma_backport.patch b/target/linux/generic/patches-3.9/025-bcma_backport.patch index 04a4573b38..47f16e906c 100644 --- a/target/linux/generic/patches-3.9/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.9/025-bcma_backport.patch @@ -8,6 +8,23 @@ config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" +@@ -34,8 +35,14 @@ config BCMA_DRIVER_PCI_HOSTMODE + PCI core hostmode operation (external PCI bus). + + config BCMA_HOST_SOC +- bool +- depends on BCMA_DRIVER_MIPS ++ bool "Support for BCMA in a SoC" ++ depends on BCMA ++ help ++ Host interface for a Broadcom AIX bus directly mapped into ++ the memory. This only works with the Broadcom SoCs from the ++ BCM47XX line. ++ ++ If unsure, say N + + config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -22,6 +22,8 @@ @@ -460,9 +477,37 @@ core->dev.release = bcma_release_core_dev; core->dev.bus = &bcma_bus_type; dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); +@@ -213,7 +237,7 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_bus_scan(bus); + if (err) { + bcma_err(bus, "Failed to scan: %d\n", err); +- return -1; ++ return err; + } + + /* Early init CC core */ --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -84,6 +84,8 @@ static const struct bcma_device_id_name +@@ -32,6 +32,18 @@ static const struct bcma_device_id_name + { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" }, + { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" }, + { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" }, ++ { BCMA_CORE_PCIEG2, "PCIe Gen 2" }, ++ { BCMA_CORE_DMA, "DMA" }, ++ { BCMA_CORE_SDIO3, "SDIO3" }, ++ { BCMA_CORE_USB20, "USB 2.0" }, ++ { BCMA_CORE_USB30, "USB 3.0" }, ++ { BCMA_CORE_A9JTAG, "ARM Cortex A9 JTAG" }, ++ { BCMA_CORE_DDR23, "Denali DDR2/DDR3 memory controller" }, ++ { BCMA_CORE_ROM, "ROM" }, ++ { BCMA_CORE_NAND, "NAND flash controller" }, ++ { BCMA_CORE_QSPI, "SPI flash controller" }, ++ { BCMA_CORE_CHIPCOMMON_B, "Chipcommon B" }, ++ { BCMA_CORE_ARMCA9, "ARM Cortex A9 core (ihost)" }, + { BCMA_CORE_AMEMC, "AMEMC (DDR)" }, + { BCMA_CORE_ALTA, "ALTA (I2S)" }, + { BCMA_CORE_INVALID, "Invalid" }, +@@ -84,6 +96,8 @@ static const struct bcma_device_id_name { BCMA_CORE_I2S, "I2S" }, { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, { BCMA_CORE_SHIM, "SHIM" }, @@ -471,7 +516,7 @@ { BCMA_CORE_DEFAULT, "Default" }, }; -@@ -137,19 +139,19 @@ static void bcma_scan_switch_core(struct +@@ -137,19 +151,19 @@ static void bcma_scan_switch_core(struct addr); } @@ -494,7 +539,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -159,14 +161,14 @@ static s32 bcma_erom_get_ci(struct bcma_ +@@ -159,14 +173,14 @@ static s32 bcma_erom_get_ci(struct bcma_ return ent; } @@ -511,7 +556,7 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); bcma_erom_push_ent(eromptr); -@@ -175,7 +177,7 @@ static bool bcma_erom_is_bridge(struct b +@@ -175,7 +189,7 @@ static bool bcma_erom_is_bridge(struct b ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); } @@ -520,7 +565,7 @@ { u32 ent; while (1) { -@@ -189,7 +191,7 @@ static void bcma_erom_skip_component(str +@@ -189,7 +203,7 @@ static void bcma_erom_skip_component(str bcma_erom_push_ent(eromptr); } @@ -529,15 +574,80 @@ { u32 ent = bcma_erom_get_ent(bus, eromptr); if (!(ent & SCAN_ER_VALID)) -@@ -199,7 +201,7 @@ static s32 bcma_erom_get_mst_port(struct +@@ -199,7 +213,7 @@ static s32 bcma_erom_get_mst_port(struct return ent; } -static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, -+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, ++static u32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr, u32 type, u8 port) { u32 addrl, addrh, sizel, sizeh = 0; +@@ -211,7 +225,7 @@ static s32 bcma_erom_get_addr_desc(struc + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); +- return -EINVAL; ++ return (u32)-EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; +@@ -255,11 +269,13 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++#define IS_ERR_VALUE_U32(x) ((x) >= (u32)-MAX_ERRNO) ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) + { +- s32 tmp; ++ u32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; +@@ -337,11 +353,11 @@ static int bcma_get_next_core(struct bcm + * the main register space for the core + */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + /* Try again to see if it is a bridge */ + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_BRIDGE, 0); +- if (tmp <= 0) { ++ if (tmp == 0 || IS_ERR_VALUE_U32(tmp)) { + return -EILSEQ; + } else { + bcma_info(bus, "Bridge found\n"); +@@ -355,7 +371,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ +@@ -372,7 +388,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ +@@ -390,7 +406,7 @@ static int bcma_get_next_core(struct bcm + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); +- if (tmp < 0) { ++ if (IS_ERR_VALUE_U32(tmp)) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -72,12 +72,12 @@ fail: @@ -713,7 +823,27 @@ } --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -134,12 +134,17 @@ struct bcma_host_ops { +@@ -72,7 +72,19 @@ struct bcma_host_ops { + /* Core-ID values. */ + #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ + #define BCMA_CORE_4706_CHIPCOMMON 0x500 ++#define BCMA_CORE_PCIEG2 0x501 ++#define BCMA_CORE_DMA 0x502 ++#define BCMA_CORE_SDIO3 0x503 ++#define BCMA_CORE_USB20 0x504 ++#define BCMA_CORE_USB30 0x505 ++#define BCMA_CORE_A9JTAG 0x506 ++#define BCMA_CORE_DDR23 0x507 ++#define BCMA_CORE_ROM 0x508 ++#define BCMA_CORE_NAND 0x509 ++#define BCMA_CORE_QSPI 0x50A ++#define BCMA_CORE_CHIPCOMMON_B 0x50B + #define BCMA_CORE_4706_SOC_RAM 0x50E ++#define BCMA_CORE_ARMCA9 0x510 + #define BCMA_CORE_4706_MAC_GBIT 0x52D + #define BCMA_CORE_AMEMC 0x52E /* DDR1/2 memory controller core */ + #define BCMA_CORE_ALTA 0x534 /* I2S core */ +@@ -134,12 +146,17 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ @@ -731,10 +861,16 @@ #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -@@ -173,6 +178,60 @@ struct bcma_host_ops { +@@ -172,6 +189,65 @@ struct bcma_host_ops { + #define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 #define BCMA_PKG_ID_BCM47188 9 - ++#define BCMA_CHIP_ID_BCM4707 53010 ++#define BCMA_PKG_ID_BCM4707 1 ++#define BCMA_PKG_ID_BCM4708 2 ++#define BCMA_PKG_ID_BCM4709 0 ++#define BCMA_CHIP_ID_BCM53018 53018 ++ +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ +#define BCMA_BOARD_TYPE_BCM94313BU 0X050F @@ -788,10 +924,9 @@ +#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 +/* BCM43142 */ +#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 -+ + struct bcma_device { struct bcma_bus *bus; - struct bcma_device_id id; --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -104,6 +104,7 @@ @@ -914,3 +1049,259 @@ /* BCMA PCI config space registers. */ #define BCMA_PCI_PMCSR 0x44 +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + +-static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) ++static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) + { + u32 v; + int i; +@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc + } + } + +-static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) ++static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) + { + int max_retries = 10; + u16 ret = 0; +@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc + return ret; + } + +-static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, ++static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, + u8 address, u16 data) + { + int max_retries = 10; +@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + ++static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, ++ u8 address, u16 data) ++{ ++ bcma_pcie_mdio_write(pc, device, address, data); ++ return bcma_pcie_mdio_read(pc, device, address); ++} ++ + /************************************************** + * Workarounds. + **************************************************/ +@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s + } + } + ++static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) ++{ ++ u16 data; ++ ++ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { ++ data = up ? 0x74 : 0x7C; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { ++ data = up ? 0x75 : 0x7D; ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); ++ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, ++ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); ++ } ++} ++ + /************************************************** + * Init. + **************************************************/ +@@ -262,7 +288,7 @@ out: + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); + +-void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) + { + u32 w; + +@@ -274,4 +300,33 @@ void bcma_core_pci_extend_L1timer(struct + bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); + bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); + } +-EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); ++ ++void bcma_core_pci_up(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_power_save(pc, true); ++ ++ bcma_core_pci_extend_L1timer(pc, true); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_up); ++ ++void bcma_core_pci_down(struct bcma_bus *bus) ++{ ++ struct bcma_drv_pci *pc; ++ ++ if (bus->hosttype != BCMA_HOSTTYPE_PCI) ++ return; ++ ++ pc = &bus->drv_pci[0]; ++ ++ bcma_core_pci_extend_L1timer(pc, false); ++ ++ bcma_core_pci_power_save(pc, false); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_down); +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -581,6 +581,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI + int bcma_core_pci_plat_dev_init(struct pci_dev *dev) + { + struct bcma_drv_pci_host *pc_host; ++ int readrq; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ +@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p + dev->irq = bcma_core_irq(pc_host->pdev->core); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + ++ readrq = pcie_get_readrq(dev); ++ if (readrq > 128) { ++ pr_info("change PCIe max read request size from %i to 128\n", readrq); ++ pcie_set_readrq(dev, 128); ++ } + return 0; + } + EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -181,10 +181,31 @@ struct pci_dev; + + #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + ++#define BCMA_CORE_PCI_ ++ ++/* MDIO devices (SERDES modules) */ ++#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 ++#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 ++#define BCMA_CORE_PCI_MDIO_BLK0 0x800 ++#define BCMA_CORE_PCI_MDIO_BLK1 0x801 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 ++#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A ++#define BCMA_CORE_PCI_MDIO_BLK2 0x802 ++#define BCMA_CORE_PCI_MDIO_BLK3 0x803 ++#define BCMA_CORE_PCI_MDIO_BLK4 0x804 ++#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ ++#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 ++#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 ++#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 ++ + /* PCIE Root Capability Register bits (Host mode only) */ + #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + + struct bcma_drv_pci; ++struct bcma_bus; + + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host { +@@ -219,7 +240,8 @@ struct bcma_drv_pci { + extern void bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); +-extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++extern void bcma_core_pci_up(struct bcma_bus *bus); ++extern void bcma_core_pci_down(struct bcma_bus *bus); + + extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); + extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +@@ -685,27 +685,6 @@ bool ai_clkctl_cc(struct si_pub *sih, en + return mode == BCMA_CLKMODE_FAST; + } + +-void ai_pci_up(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true); +-} +- +-/* Unconfigure and/or apply various WARs when going down */ +-void ai_pci_down(struct si_pub *sih) +-{ +- struct si_info *sii; +- +- sii = container_of(sih, struct si_info, pub); +- +- if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI) +- bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false); +-} +- + /* Enable BT-COEX & Ex-PA for 4313 */ + void ai_epa_4313war(struct si_pub *sih) + { +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.h +@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(st + extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode); + extern bool ai_deviceremoved(struct si_pub *sih); + +-extern void ai_pci_down(struct si_pub *sih); +-extern void ai_pci_up(struct si_pub *sih); +- + /* Enable Ex-PA for 4313 */ + extern void ai_epa_4313war(struct si_pub *sih); + +--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -4644,7 +4644,7 @@ static int brcms_b_attach(struct brcms_c + brcms_c_coredisable(wlc_hw); + + /* Match driver "down" state */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + + /* turn off pll and xtal to match driver "down" state */ + brcms_b_xtal(wlc_hw, OFF); +@@ -4987,12 +4987,12 @@ static int brcms_b_up_prep(struct brcms_ + */ + if (brcms_b_radio_read_hwdisabled(wlc_hw)) { + /* put SB PCI in down state again */ +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + return -ENOMEDIUM; + } + +- ai_pci_up(wlc_hw->sih); ++ bcma_core_pci_up(wlc_hw->d11core->bus); + + /* reset the d11 core */ + brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); +@@ -5189,7 +5189,7 @@ static int brcms_b_down_finish(struct br + + /* turn off primary xtal and pll */ + if (!wlc_hw->noreset) { +- ai_pci_down(wlc_hw->sih); ++ bcma_core_pci_down(wlc_hw->d11core->bus); + brcms_b_xtal(wlc_hw, OFF); + } + } diff --git a/target/linux/generic/patches-3.9/026-bcma_pcie_up_down.patch b/target/linux/generic/patches-3.9/026-bcma_pcie_up_down.patch deleted file mode 100644 index 4dbf685b94..0000000000 --- a/target/linux/generic/patches-3.9/026-bcma_pcie_up_down.patch +++ /dev/null @@ -1,167 +0,0 @@ -bcma patch adding bcma_core_pci_up() and bcma_core_pci_down(), this gets -called by b43 and brcmsmac - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -31,7 +31,7 @@ static void bcma_pcie_write(struct bcma_ - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - --static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) -+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u16 phy) - { - u32 v; - int i; -@@ -55,7 +55,7 @@ static void bcma_pcie_mdio_set_phy(struc - } - } - --static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) -+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address) - { - int max_retries = 10; - u16 ret = 0; -@@ -98,7 +98,7 @@ static u16 bcma_pcie_mdio_read(struct bc - return ret; - } - --static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, -+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u16 device, - u8 address, u16 data) - { - int max_retries = 10; -@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct - pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - -+static u16 bcma_pcie_mdio_writeread(struct bcma_drv_pci *pc, u16 device, -+ u8 address, u16 data) -+{ -+ bcma_pcie_mdio_write(pc, device, address, data); -+ return bcma_pcie_mdio_read(pc, device, address); -+} -+ - /************************************************** - * Workarounds. - **************************************************/ -@@ -203,6 +210,25 @@ static void bcma_core_pci_config_fixup(s - } - } - -+static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up) -+{ -+ u16 data; -+ -+ if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) { -+ data = up ? 0x74 : 0x7C; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) { -+ data = up ? 0x75 : 0x7D; -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65); -+ bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1, -+ BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data); -+ } -+} -+ - /************************************************** - * Init. - **************************************************/ -@@ -262,7 +288,7 @@ out: - } - EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); - --void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) -+static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) - { - u32 w; - -@@ -274,4 +300,38 @@ void bcma_core_pci_extend_L1timer(struct - bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); - bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); - } --EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); -+ -+void bcma_core_pci_up(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_power_save(pc, true); -+ -+ bcma_core_pci_extend_L1timer(pc, true); -+ -+ if ((pc->core->id.rev == 18 || pc->core->id.rev == 19) && -+ bus->boardinfo.vendor != PCI_VENDOR_ID_APPLE) { -+ pcie_set_readrq(bus->host_pci, 128); -+ } -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_up); -+ -+void bcma_core_pci_down(struct bcma_bus *bus) -+{ -+ struct bcma_drv_pci *pc; -+ -+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) -+ return; -+ -+ pc = &bus->drv_pci[0]; -+ -+ bcma_core_pci_extend_L1timer(pc, false); -+ -+ bcma_core_pci_power_save(pc, false); -+} -+EXPORT_SYMBOL_GPL(bcma_core_pci_down); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -181,10 +181,31 @@ struct pci_dev; - - #define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 - -+#define BCMA_CORE_PCI_ -+ -+/* MDIO devices (SERDES modules) */ -+#define BCMA_CORE_PCI_MDIO_IEEE0 0x000 -+#define BCMA_CORE_PCI_MDIO_IEEE1 0x001 -+#define BCMA_CORE_PCI_MDIO_BLK0 0x800 -+#define BCMA_CORE_PCI_MDIO_BLK1 0x801 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT0 0x16 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT1 0x17 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT2 0x18 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT3 0x19 -+#define BCMA_CORE_PCI_MDIO_BLK1_MGMT4 0x1A -+#define BCMA_CORE_PCI_MDIO_BLK2 0x802 -+#define BCMA_CORE_PCI_MDIO_BLK3 0x803 -+#define BCMA_CORE_PCI_MDIO_BLK4 0x804 -+#define BCMA_CORE_PCI_MDIO_TXPLL 0x808 /* TXPLL register block idx */ -+#define BCMA_CORE_PCI_MDIO_TXCTRL0 0x820 -+#define BCMA_CORE_PCI_MDIO_SERDESID 0x831 -+#define BCMA_CORE_PCI_MDIO_RXCTRL0 0x840 -+ - /* PCIE Root Capability Register bits (Host mode only) */ - #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 - - struct bcma_drv_pci; -+struct bcma_bus; - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE - struct bcma_drv_pci_host { -@@ -219,7 +240,8 @@ struct bcma_drv_pci { - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); --extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); -+extern void bcma_core_pci_up(struct bcma_bus *bus); -+extern void bcma_core_pci_down(struct bcma_bus *bus); - - extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); - extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); |