diff options
Diffstat (limited to 'target/linux')
11 files changed, 181 insertions, 54 deletions
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts index 148d017540..ed00cdb585 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-lite.dts @@ -1,3 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + /dts-v1/; #include "qca9531_glinet_gl-ar300m.dtsi" @@ -7,6 +9,8 @@ model = "GL.iNet GL-AR300M-Lite"; }; +/delete-node/ &nand_flash; + // "Disable" unpopulated GMAC1 ð1 { diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts index 26c30f2b72..00f9f5c82d 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts @@ -1,3 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + /dts-v1/; #include "qca9531_glinet_gl-ar300m.dtsi" @@ -7,28 +9,10 @@ model = "GL.iNet GL-AR300M (NAND)"; }; -&spi { - num-cs = <1>; - - flash@1 { - compatible = "spinand,mt29f"; - reg = <1>; - spi-max-frequency = <25000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x000000 0x0200000>; - }; +&nand_kernel { + label = "kernel"; +}; - partition@1 { - label = "ubi"; - reg = <0x200000 0x7e00000>; - }; - }; - }; +&nand_ubi { + label = "ubi"; }; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts index 22e5ae4e74..34f48f5f61 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts @@ -6,3 +6,8 @@ compatible = "glinet,gl-ar300m-nor", "qca,qca9531"; model = "GL.iNet GL-AR300M (NOR)"; }; + +&nor_firmware { + compatible = "denx,uimage"; + label = "firmware"; +}; diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi index 78961bf71b..72bc2a6466 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi @@ -42,7 +42,7 @@ leds { compatible = "gpio-leds"; - // Colors from non-Lite versions + // Colors for non-Lite versions led_status: status { label = "gl-ar300m:green:status"; @@ -75,10 +75,12 @@ &spi { status = "okay"; - num-cs = <0>; + + num-cs = <2>; + cs-gpios = <0>, <0>; flash@0 { - compatible = "winbond,w25q128", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; @@ -93,24 +95,45 @@ read-only; }; - partition@1 { + partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; }; - partition@2 { - compatible = "denx,uimage"; - label = "firmware"; + nor_firmware: partition@50000 { + label = "nor_firmware"; reg = <0x050000 0xfa0000>; }; - art: partition@3 { + art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; }; }; }; + + nand_flash: flash@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + nand_kernel: partition@0 { + label = "nand_kernel"; + reg = <0x000000 0x400000>; + }; + + nand_ubi: partition@400000 { + label = "nand_ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; }; &uart { diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index de2c8e9197..4ab504654e 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -94,9 +94,6 @@ glinet,gl-ar150) ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" ;; -glinet,gl-ar300m-nor) - ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" - ;; glinet,gl-ar300m-lite) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0" ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 70631c20d0..011bb41262 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -562,12 +562,6 @@ define Device/glinet_gl-ar300m-lite endef TARGET_DEVICES += glinet_gl-ar300m-lite -define Device/glinet_gl-ar300m-nor - $(Device/glinet_gl-ar300m-common-nor) - DEVICE_MODEL := GL-AR300M -endef -TARGET_DEVICES += glinet_gl-ar300m-nor - define Device/glinet_gl-ar750 ATH_SOC := qca9531 DEVICE_VENDOR := GL.iNet diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index ef6b607002..f9961840f0 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -45,22 +45,36 @@ define Device/aerohive_hiveap-121 endef TARGET_DEVICES += aerohive_hiveap-121 -define Device/glinet_gl-ar300m-nand +define Device/glinet_gl-ar300m-common-nand ATH_SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR300M + DEVICE_PACKAGES := kmod-usb2 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 16000k + PAGESIZE := 2048 + VID_HDR_OFFSET := 2048 +endef + +define Device/glinet_gl-ar300m-nand + $(Device/glinet_gl-ar300m-common-nand) DEVICE_VARIANT := NAND - DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport - KERNEL_SIZE := 2048k BLOCKSIZE := 128k - PAGESIZE := 2048 - VID_HDR_OFFSET := 512 - IMAGES += factory.ubi - IMAGE/sysupgrade.bin := sysupgrade-tar - IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi + IMAGES += factory.img + IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + SUPPORTED_DEVICES += glinet,gl-ar300m-nor endef TARGET_DEVICES += glinet_gl-ar300m-nand +define Device/glinet_gl-ar300m-nor + $(Device/glinet_gl-ar300m-common-nand) + DEVICE_VARIANT := NOR + BLOCKSIZE := 64k + SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m +endef +TARGET_DEVICES += glinet_gl-ar300m-nor + # fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff) define Device/netgear_ath79_nand DEVICE_VENDOR := NETGEAR diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds index f851b3d886..f58527d87e 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds @@ -8,7 +8,8 @@ board=$(board_name) boardname="${board##*,}" case "$board" in -glinet,gl-ar300m-nand) +glinet,gl-ar300m-nand|\ +glinet,gl-ar300m-nor) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" ;; netgear,wndr4300) diff --git a/target/linux/ath79/nand/base-files/etc/init.d/bootcount b/target/linux/ath79/nand/base-files/etc/init.d/bootcount new file mode 100755 index 0000000000..c82386b55f --- /dev/null +++ b/target/linux/ath79/nand/base-files/etc/init.d/bootcount @@ -0,0 +1,13 @@ +#!/bin/sh /etc/rc.common + +# SPDX-License-Identifier: GPL-2.0 + +START=99 + +boot() { + case $(board_name) in + glinet,gl-ar300m-nand) + fw_setenv bootcount 0 + ;; + esac +} diff --git a/target/linux/ath79/nand/base-files/lib/upgrade/glinet.sh b/target/linux/ath79/nand/base-files/lib/upgrade/glinet.sh new file mode 100644 index 0000000000..86729f8f2a --- /dev/null +++ b/target/linux/ath79/nand/base-files/lib/upgrade/glinet.sh @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 Jeff Kletsky +# + +glinet_using_boot_dev_switch() { + if [ "$(fw_printenv -n boot_dev 2>/dev/null)" = "on" ] ; then + >&2 echo "NOTE: boot_dev=on; use switch to control boot partition" + true + else + false + fi +} + +glinet_set_next_boot_nand() { + mkdir -p /var/lock + ! glinet_using_boot_dev_switch && \ + fw_setenv bootcount 0 && \ + >&2 echo "Next boot set for NAND" +} + +glinet_set_next_boot_nor() { + mkdir -p /var/lock + ! glinet_using_boot_dev_switch && \ + fw_setenv bootcount 3 && \ + >&2 echo "Next boot set for NOR" +} + +glinet_nand_nor_do_upgrade() { + set_next_boot_nand() { glinet_set_next_boot_nand; } + set_next_boot_nor() { glinet_set_next_boot_nor; } + nand_nor_do_upgrade "$1" +} + +nand_nor_do_upgrade() { + local upgrade_file="$1" + + local pn + local found="" + local err + + case "$(get_magic_long "$upgrade_file")" in + + "27051956") # U-Boot Image Magic + + for pn in "nor_${PART_NAME}" "$PART_NAME" ; do # firmware + if [ "$(find_mtd_index "$pn")" ] ; then + PART_NAME="$pn" + found="yes" + break + fi + done + if [ "$found" = "yes" ] ; then + >&2 echo "Running NOR upgrade" + default_do_upgrade "$upgrade_file" + # At this time, default_do_upgrade() exits on error + type set_next_boot_nor >/dev/null && set_next_boot_nor + else + >&2 echo "ERROR: UPGRADE FAILED: Unable to locate '$PART_NAME' or 'nor_${PART_NAME}'" + exit 1 + fi + ;; + + *) # otherwise a file that nand_do_upgrade can process + + for pn in "nand_${CI_KERNPART}" "$CI_KERNPART" ; do # kernel + if [ "$(find_mtd_index "$pn")" ] ; then + CI_KERNPART="$pn" + break + fi + done + for pn in "nand_${CI_UBIPART}" "$CI_UBIPART" ; do # ubi + if [ "$(find_mtd_index "$pn")" ] ; then + CI_UBIPART="$pn" + break + fi + done + for pn in "nand_${CI_ROOTPART}" "$CI_ROOTPART" ; do #rootfs + if [ "$(find_mtd_index "$pn")" ] ; then + CI_ROOTPART="$pn" + break + fi + done + >&2 echo "Running NAND upgrade" + # TODO: change order when NAND upgrade offers return + type set_next_boot_nand >/dev/null && set_next_boot_nand + nand_do_upgrade "$upgrade_file" + ;; + esac +} diff --git a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh index 3956d5d73f..69105b1668 100644 --- a/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/nand/base-files/lib/upgrade/platform.sh @@ -1,20 +1,22 @@ -# # Copyright (C) 2011 OpenWrt.org -# PART_NAME=firmware -REQUIRE_IMAGE_METADATA=1 +REQUIRE_IMAGE_METADATA=1 platform_check_image() { return 0 } +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + platform_do_upgrade() { local board=$(board_name) case "$board" in - glinet,gl-ar300m-nand) - default_do_upgrade "$1" + glinet,gl-ar300m-nand|\ + glinet,gl-ar300m-nor) + glinet_nand_nor_do_upgrade "$1" ;; *) nand_do_upgrade "$1" |