diff options
Diffstat (limited to 'target/linux')
14 files changed, 0 insertions, 998 deletions
diff --git a/target/linux/ar7/config-3.18 b/target/linux/ar7/config-3.18 deleted file mode 100644 index a91d45e8d7..0000000000 --- a/target/linux/ar7/config-3.18 +++ /dev/null @@ -1,129 +0,0 @@ -CONFIG_ADM6996_PHY=y -CONFIG_AR7=y -CONFIG_AR7_TI=y -# CONFIG_AR7_TYPE_AC49X is not set -CONFIG_AR7_TYPE_TI=y -CONFIG_AR7_WDT=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_BOOT_ELF32=y -CONFIG_CEVT_R4K=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPMAC=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KALLSYMS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIPS=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_AC49X_PARTS is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MVSWITCH_PHY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_RCU_STALL_COMMON is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_VLYNQ=y -# CONFIG_VLYNQ_DEBUG is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/patches-3.18/001-mips-ar7-fix-serial.patch b/target/linux/ar7/patches-3.18/001-mips-ar7-fix-serial.patch deleted file mode 100644 index 6896352266..0000000000 --- a/target/linux/ar7/patches-3.18/001-mips-ar7-fix-serial.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 443ab715a40881d6c9ba11b027ba154bac904cb0 Mon Sep 17 00:00:00 2001 -From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> -Date: Sat, 10 May 2014 23:19:08 +0200 -Subject: [PATCH] MIPS/AR7: ensure that serial ports are properly set up - -without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is -never copied, resulting in a dead port. - -Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> ---- - arch/mips/ar7/platform.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi - uart_port.type = PORT_AR7; - uart_port.uartclk = clk_get_rate(bus_clk) / 2; - uart_port.iotype = UPIO_MEM32; -+ uart_port.flags = UPF_FIXED_TYPE; - uart_port.regshift = 2; - - uart_port.line = 0; diff --git a/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch b/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch deleted file mode 100644 index f6a8754864..0000000000 --- a/target/linux/ar7/patches-3.18/002-MIPS-AR7-ensure-the-port-type-s-FCR-value-is-used.patch +++ /dev/null @@ -1,48 +0,0 @@ -From ee6c9d41de084b2cefd90e5e0c9f30a35f6d3967 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jonas.gorski@gmail.com> -Date: Sun, 29 Oct 2017 15:50:42 +0100 -Subject: [PATCH RFC 3/3] MIPS: AR7: ensure the port type's FCR value is used - -Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt -trigger I/F of FIFO buffers"), the port's default FCR value isn't used -in serial8250_do_set_termios anymore, but copied over once in -serial8250_config_port and then modified as needed. - -Unfortunately, serial8250_config_port will never be called if the port -is shared between kernel and userspace, and the port's flag doesn't have -UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well. - -This causes garbled output from userspace: - -[ 5.220000] random: procd urandom read with 49 bits of entropy available -ers - [kee - -Fix this by forcing it to be configured on boot, resulting in the -expected output: - -[ 5.250000] random: procd urandom read with 50 bits of entropy available -Press the [f] key and hit [enter] to enter failsafe mode -Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level - -Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers") -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- -I'm not sure if this is just AR7's issue, or if this points to a general -issue for UARTs used as kernel console and login console with the "fixed" -commit. - - arch/mips/ar7/platform.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -581,7 +581,7 @@ static int __init ar7_register_uarts(voi - uart_port.type = PORT_AR7; - uart_port.uartclk = clk_get_rate(bus_clk) / 2; - uart_port.iotype = UPIO_MEM32; -- uart_port.flags = UPF_FIXED_TYPE; -+ uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF; - uart_port.regshift = 2; - - uart_port.line = 0; diff --git a/target/linux/ar7/patches-3.18/100-fix-highmem-offset.patch b/target/linux/ar7/patches-3.18/100-fix-highmem-offset.patch deleted file mode 100644 index f1a7549786..0000000000 --- a/target/linux/ar7/patches-3.18/100-fix-highmem-offset.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/include/asm/mach-ar7/spaces.h -+++ b/arch/mips/include/asm/mach-ar7/spaces.h -@@ -20,6 +20,8 @@ - #define UNCAC_BASE _AC(0xb4000000, UL) /* 0xa0000000 + PHYS_OFFSET */ - #define IO_BASE UNCAC_BASE - -+#define HIGHMEM_START _AC(0x20000000, UL) -+ - #include <asm/mach-generic/spaces.h> - - #endif /* __ASM_AR7_SPACES_H */ diff --git a/target/linux/ar7/patches-3.18/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch b/target/linux/ar7/patches-3.18/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch deleted file mode 100644 index 74ac0d1482..0000000000 --- a/target/linux/ar7/patches-3.18/101-MIPS-AR7-allow-NULL-clock-for-clk_get_rate.patch +++ /dev/null @@ -1,45 +0,0 @@ -From patchwork Tue Jul 18 10:17:26 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [5/9] MIPS: AR7: allow NULL clock for clk_get_rate -X-Patchwork-Submitter: Jonas Gorski <jonas.gorski@gmail.com> -X-Patchwork-Id: 16775 -Message-Id: <20170718101730.2541-6-jonas.gorski@gmail.com> -To: unlisted-recipients:; (no To-header on input) -Cc: Ralf Baechle <ralf@linux-mips.org>, - Paul Gortmaker <paul.gortmaker@windriver.com>, - James Hogan <james.hogan@imgtec.com>, - linux-mips@linux-mips.org, linux-kernel@vger.kernel.org -Date: Tue, 18 Jul 2017 12:17:26 +0200 -From: Jonas Gorski <jonas.gorski@gmail.com> -List-Id: linux-mips <linux-mips.eddie.linux-mips.org> - -Make the behaviour of clk_get_rate consistent with common clk's -clk_get_rate by accepting NULL clocks as parameter. Some device -drivers rely on this, and will cause an OOPS otherwise. - -Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API") -Cc: Ralf Baechle <ralf@linux-mips.org> -Cc: Paul Gortmaker <paul.gortmaker@windriver.com> -Cc: James Hogan <james.hogan@imgtec.com> -Cc: linux-mips@linux-mips.org -Cc: linux-kernel@vger.kernel.org -Reported-by: Mathias Kresin <dev@kresin.me> -Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> ---- - arch/mips/ar7/clock.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/mips/ar7/clock.c -+++ b/arch/mips/ar7/clock.c -@@ -430,6 +430,9 @@ EXPORT_SYMBOL(clk_disable); - - unsigned long clk_get_rate(struct clk *clk) - { -+ if (!clk) -+ return 0; -+ - return clk->rate; - } - EXPORT_SYMBOL(clk_get_rate); diff --git a/target/linux/ar7/patches-3.18/110-flash.patch b/target/linux/ar7/patches-3.18/110-flash.patch deleted file mode 100644 index e4aeffd3e2..0000000000 --- a/target/linux/ar7/patches-3.18/110-flash.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -12,7 +12,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o --obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o - obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o - obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -199,7 +199,7 @@ static struct resource physmap_flash_res - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x10000000, -- .end = 0x107fffff, -+ .end = 0x11ffffff, - }; - - static const char *ar7_probe_types[] = { "ar7part", NULL }; diff --git a/target/linux/ar7/patches-3.18/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-3.18/160-vlynq_try_remote_first.patch deleted file mode 100644 index 1d1310d82e..0000000000 --- a/target/linux/ar7/patches-3.18/160-vlynq_try_remote_first.patch +++ /dev/null @@ -1,300 +0,0 @@ ---- a/drivers/vlynq/vlynq.c -+++ b/drivers/vlynq/vlynq.c -@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev - return 0; - } - -+static volatile int vlynq_delay_value_new = 0; -+ -+static void vlynq_delay_wait(u32 count) -+{ -+ /* Code adopted from original vlynq driver */ -+ int i = 0; -+ volatile int *ptr = &vlynq_delay_value_new; -+ *ptr = 0; -+ -+ /* We are assuming that the each cycle takes about -+ * 23 assembly instructions. */ -+ for(i = 0; i < (count + 23)/23; i++) -+ *ptr = *ptr + 1; -+} -+ - static void vlynq_reset(struct vlynq_device *dev) - { -+ u32 rtm = readl(&dev->local->revision); -+ -+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ? -+ 0 : 0x600000; -+ - writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET, - &dev->local->control); - - /* Wait for the devices to finish resetting */ -- msleep(5); -+ vlynq_delay_wait(0xffffff); - - /* Remove reset bit */ -- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET, -+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm, - &dev->local->control); - - /* Give some time for the devices to settle */ -- msleep(5); -+ vlynq_delay_wait(0xffffff); - } - - static void vlynq_irq_unmask(struct irq_data *d) -@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn - } - EXPORT_SYMBOL(vlynq_unregister_driver); - -+enum vlynq_clk_src { -+ vlynq_clk_external, -+ vlynq_clk_local, -+ vlynq_clk_remote, -+ vlynq_clk_invalid, -+}; -+ -+static int __vlynq_set_clocks(struct vlynq_device *dev, -+ enum vlynq_clk_src clk_dir, -+ int lclk_div, int rclk_div) -+{ -+ u32 reg; -+ -+ if (clk_dir == vlynq_clk_invalid) { -+ printk(KERN_ERR "%s: attempt to set invalid clocking\n", -+ dev_name(&dev->dev)); -+ return -EINVAL; -+ } -+ -+ reg = readl(&dev->local->control); -+ if (readl(&dev->local->revision) < 0x00010205) { -+ if (clk_dir & vlynq_clk_local) -+ reg |= VLYNQ_CTRL_CLOCK_INT; -+ else -+ reg &= ~VLYNQ_CTRL_CLOCK_INT; -+ } -+ reg &= ~VLYNQ_CTRL_CLOCK_MASK; -+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div); -+ writel(reg, &dev->local->control); -+ -+ if (!vlynq_linked(dev)) -+ return -ENODEV; -+ -+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n", -+ dev_name(&dev->dev), readl(&dev->local->revision)); -+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n", -+ dev_name(&dev->dev), readl(&dev->remote->revision)); -+ -+ reg = readl(&dev->remote->control); -+ if (readl(&dev->remote->revision) < 0x00010205) { -+ if (clk_dir & vlynq_clk_remote) -+ reg |= VLYNQ_CTRL_CLOCK_INT; -+ else -+ reg &= ~VLYNQ_CTRL_CLOCK_INT; -+ } -+ reg &= ~VLYNQ_CTRL_CLOCK_MASK; -+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div); -+ writel(reg, &dev->remote->control); -+ -+ if (!vlynq_linked(dev)) -+ return -ENODEV; -+ -+ return 0; -+} -+ - /* - * A VLYNQ remote device can clock the VLYNQ bus master - * using a dedicated clock line. In that case, both the -@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly - int i; - - vlynq_reset(dev); -- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ? -- i <= vlynq_rdiv8 : i >= vlynq_rdiv2; -- dev->dev_id ? i++ : i--) { -+ for (i = 0; i <= 7; i++) { - - if (!vlynq_linked(dev)) - break; - -- writel((readl(&dev->remote->control) & -- ~VLYNQ_CTRL_CLOCK_MASK) | -- VLYNQ_CTRL_CLOCK_INT | -- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), -- &dev->remote->control); -- writel((readl(&dev->local->control) -- & ~(VLYNQ_CTRL_CLOCK_INT | -- VLYNQ_CTRL_CLOCK_MASK)) | -- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), -- &dev->local->control); -- -- if (vlynq_linked(dev)) { -- printk(KERN_DEBUG -- "%s: using remote clock divisor %d\n", -- dev_name(&dev->dev), i - vlynq_rdiv1 + 1); -- dev->divisor = i; -+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) { -+ printk(KERN_INFO -+ "%s: using remote clock divisor %d\n", -+ dev_name(&dev->dev), i + 1); -+ dev->divisor = i + vlynq_rdiv1; - return 0; - } else { - vlynq_reset(dev); -@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly - */ - static int __vlynq_try_local(struct vlynq_device *dev) - { -- int i; -+ int i, dir = !dev->dev_id; - - vlynq_reset(dev); - -- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ? -- i <= vlynq_ldiv8 : i >= vlynq_ldiv2; -- dev->dev_id ? i++ : i--) { -- -- writel((readl(&dev->local->control) & -- ~VLYNQ_CTRL_CLOCK_MASK) | -- VLYNQ_CTRL_CLOCK_INT | -- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1), -- &dev->local->control); -- -- if (vlynq_linked(dev)) { -- printk(KERN_DEBUG -- "%s: using local clock divisor %d\n", -- dev_name(&dev->dev), i - vlynq_ldiv1 + 1); -- dev->divisor = i; -+ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) { -+ -+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) { -+ printk(KERN_INFO -+ "%s: using local clock divisor %d\n", -+ dev_name(&dev->dev), i + 1); -+ dev->divisor = i + vlynq_ldiv1; - return 0; - } else { - vlynq_reset(dev); -@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v - if (!vlynq_linked(dev)) - return -ENODEV; - -- writel((readl(&dev->remote->control) & -- ~VLYNQ_CTRL_CLOCK_INT), -- &dev->remote->control); -- -- writel((readl(&dev->local->control) & -- ~VLYNQ_CTRL_CLOCK_INT), -- &dev->local->control); -- -- if (vlynq_linked(dev)) { -- printk(KERN_DEBUG "%s: using external clock\n", -- dev_name(&dev->dev)); -- dev->divisor = vlynq_div_external; -+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) { -+ printk(KERN_INFO "%s: using external clock\n", -+ dev_name(&dev->dev)); -+ dev->divisor = vlynq_div_external; - return 0; - } - -@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct - return result; - - switch (dev->divisor) { -- case vlynq_div_external: - case vlynq_div_auto: - /* When the device is brought from reset it should have clock - * generation negotiated by hardware. - * Check which device is generating clocks and perform setup - * accordingly */ -- if (vlynq_linked(dev) && readl(&dev->remote->control) & -- VLYNQ_CTRL_CLOCK_INT) { -- if (!__vlynq_try_remote(dev) || -- !__vlynq_try_local(dev) || -- !__vlynq_try_external(dev)) -- return 0; -- } else { -- if (!__vlynq_try_external(dev) || -- !__vlynq_try_local(dev) || -- !__vlynq_try_remote(dev)) -- return 0; -- } -+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev)) -+ return 0; -+ case vlynq_div_external: -+ if (!__vlynq_try_external(dev)) -+ return 0; - break; - case vlynq_ldiv1: - case vlynq_ldiv2: -@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct - case vlynq_ldiv6: - case vlynq_ldiv7: - case vlynq_ldiv8: -- writel(VLYNQ_CTRL_CLOCK_INT | -- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - -- vlynq_ldiv1), &dev->local->control); -- writel(0, &dev->remote->control); -- if (vlynq_linked(dev)) { -- printk(KERN_DEBUG -- "%s: using local clock divisor %d\n", -- dev_name(&dev->dev), -- dev->divisor - vlynq_ldiv1 + 1); -+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor - -+ vlynq_ldiv1, 0)) { -+ printk(KERN_INFO -+ "%s: using local clock divisor %d\n", -+ dev_name(&dev->dev), -+ dev->divisor - vlynq_ldiv1 + 1); - return 0; - } - break; -@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct - case vlynq_rdiv6: - case vlynq_rdiv7: - case vlynq_rdiv8: -- writel(0, &dev->local->control); -- writel(VLYNQ_CTRL_CLOCK_INT | -- VLYNQ_CTRL_CLOCK_DIV(dev->divisor - -- vlynq_rdiv1), &dev->remote->control); -- if (vlynq_linked(dev)) { -- printk(KERN_DEBUG -- "%s: using remote clock divisor %d\n", -- dev_name(&dev->dev), -- dev->divisor - vlynq_rdiv1 + 1); -+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0, -+ dev->divisor - vlynq_rdiv1)) { -+ printk(KERN_INFO -+ "%s: using remote clock divisor %d\n", -+ dev_name(&dev->dev), -+ dev->divisor - vlynq_rdiv1 + 1); - return 0; - } - break; - } -- -+ vlynq_reset(dev); - ops->off(dev); - return -ENODEV; - } -@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d - platform_set_drvdata(pdev, dev); - - printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", -- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq, -- (void *)dev->mem_start); -+ dev_name(&dev->dev), (void *)dev->regs_start, -+ dev->irq, (void *)dev->mem_start); - - dev->dev_id = 0; - dev->divisor = vlynq_div_auto; -- result = __vlynq_enable_device(dev); -- if (result == 0) { -+ if (!__vlynq_enable_device(dev)) { - dev->dev_id = readl(&dev->remote->chip); -+ vlynq_reset(dev); - ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev); - } - if (dev->dev_id) diff --git a/target/linux/ar7/patches-3.18/200-free-mem-below-kernel-offset.patch b/target/linux/ar7/patches-3.18/200-free-mem-below-kernel-offset.patch deleted file mode 100644 index 4011942d79..0000000000 --- a/target/linux/ar7/patches-3.18/200-free-mem-below-kernel-offset.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/mips/ar7/memory.c -+++ b/arch/mips/ar7/memory.c -@@ -66,5 +66,11 @@ void __init prom_meminit(void) - - void __init prom_free_prom_memory(void) - { -- /* Nothing to free */ -+ /* adapted from arch/mips/txx9/generic/setup.c */ -+ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE; -+ unsigned long eaddr = __pa_symbol(&_text); -+ -+ /* free memory between prom-record and kernel _text base */ -+ if (saddr < eaddr) -+ free_init_pages("prom memory", saddr, eaddr); - } diff --git a/target/linux/ar7/patches-3.18/300-add-ac49x-platform.patch b/target/linux/ar7/patches-3.18/300-add-ac49x-platform.patch deleted file mode 100644 index ccdc84d309..0000000000 --- a/target/linux/ar7/patches-3.18/300-add-ac49x-platform.patch +++ /dev/null @@ -1,85 +0,0 @@ ---- a/arch/mips/ar7/Platform -+++ b/arch/mips/ar7/Platform -@@ -3,4 +3,9 @@ - # - platform-$(CONFIG_AR7) += ar7/ - cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 --load-$(CONFIG_AR7) += 0xffffffff94100000 -+load-$(CONFIG_AR7_TI) += 0xffffffff94100000 -+ -+# -+# AudioCodes AC49x -+# -+load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000 ---- a/arch/mips/ar7/setup.c -+++ b/arch/mips/ar7/setup.c -@@ -69,6 +69,10 @@ const char *get_system_type(void) - return "TI AR7 (TNETV1056)"; - case TITAN_CHIP_1060: - return "TI AR7 (TNETV1060)"; -+ case TITAN_CHIP_AC495: -+ return "AudioCodes AC495"; -+ case TITAN_CHIP_AC496: -+ return "AudioCodes AC496"; - } - default: - return "TI AR7 (unknown)"; ---- a/arch/mips/include/asm/mach-ar7/ar7.h -+++ b/arch/mips/include/asm/mach-ar7/ar7.h -@@ -92,6 +92,8 @@ - #define TITAN_CHIP_1055 0x0e - #define TITAN_CHIP_1056 0x0d - #define TITAN_CHIP_1060 0x07 -+#define TITAN_CHIP_AC495 0x00 -+#define TITAN_CHIP_AC496 0x02 - - /* Interrupts */ - #define AR7_IRQ_UART0 15 ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -94,7 +94,7 @@ config AR7 - select HAVE_CLK - help - Support for the Texas Instruments AR7 System-on-a-Chip -- family: TNETD7100, 7200 and 7300. -+ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x. - - config ATH79 - bool "Atheros AR71XX/AR724X/AR913X based boards" -@@ -835,6 +835,7 @@ config MIPS_PARAVIRT - endchoice - - source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar7/Kconfig" - source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm47xx/Kconfig" - source "arch/mips/bcm63xx/Kconfig" ---- /dev/null -+++ b/arch/mips/ar7/Kconfig -@@ -0,0 +1,26 @@ -+if AR7 -+ -+config AR7_TI -+ bool -+ -+config AR7_AC49X -+ bool -+ -+choice -+ prompt "AR7 SoC family selection" -+ default AR7_TYPE_TI -+ depends on AR7 -+ help -+ Select AR7 MIPS SoC implementation. -+ -+ config AR7_TYPE_TI -+ bool "Texas Instruments AR7" -+ select AR7_TI -+ -+ config AR7_TYPE_AC49X -+ bool "AudioCodes AC49X" -+ select AR7_AC49X -+ -+endchoice -+ -+endif diff --git a/target/linux/ar7/patches-3.18/310-ac49x-prom-support.patch b/target/linux/ar7/patches-3.18/310-ac49x-prom-support.patch deleted file mode 100644 index dddf22106a..0000000000 --- a/target/linux/ar7/patches-3.18/310-ac49x-prom-support.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/ar7/prom.c -+++ b/arch/mips/ar7/prom.c -@@ -70,6 +70,7 @@ struct psbl_rec { - }; - - static const char psp_env_version[] __initconst = "TIENV0.8"; -+static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2"; - - struct psp_env_chunk { - u8 num; -@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e - struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); - void *psp_env = (void *)KSEG1ADDR(psbl->env_base); - -- if (strcmp(psp_env, psp_env_version) == 0) { -+ if (strcmp(psp_env, psp_env_version) == 0 || -+ strcmp(psp_env, psp_env_version_ac49x) == 0) { - parse_psp_env(psp_env); - } else { - for (i = 0; i < MAX_ENTRY; i++, env++) diff --git a/target/linux/ar7/patches-3.18/320-ac49x-mtd-partitions.patch b/target/linux/ar7/patches-3.18/320-ac49x-mtd-partitions.patch deleted file mode 100644 index 53ac07273a..0000000000 --- a/target/linux/ar7/patches-3.18/320-ac49x-mtd-partitions.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -164,6 +164,11 @@ config MTD_OF_PARTS - the partition map from the children of the flash node, - as described in Documentation/devicetree/booting-without-of.txt. - -+config MTD_AC49X_PARTS -+ tristate "AudioCodes AC49X partitioning support" -+ ---help--- -+ AudioCodes AC49X partitioning support -+ - config MTD_AR7_PARTS - tristate "TI AR7 partitioning support" - ---help--- ---- a/drivers/mtd/Makefile -+++ b/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SPLIT) += mtdsplit/ - obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o -+obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o - obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o - obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -202,7 +202,7 @@ static struct resource physmap_flash_res - .end = 0x11ffffff, - }; - --static const char *ar7_probe_types[] = { "ar7part", NULL }; -+static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL }; - - static struct physmap_flash_data physmap_flash_data = { - .width = 2, diff --git a/target/linux/ar7/patches-3.18/920-ar7part.patch b/target/linux/ar7/patches-3.18/920-ar7part.patch deleted file mode 100644 index 9948858d05..0000000000 --- a/target/linux/ar7/patches-3.18/920-ar7part.patch +++ /dev/null @@ -1,118 +0,0 @@ ---- a/drivers/mtd/ar7part.c -+++ b/drivers/mtd/ar7part.c -@@ -30,11 +30,14 @@ - - #include <uapi/linux/magic.h> - -+#include <asm/mach-ar7/prom.h> -+ - #define AR7_PARTS 4 - #define ROOT_OFFSET 0xe0000 - - #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42) - #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281) -+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c) - - struct ar7_bin_rec { - unsigned int checksum; -@@ -42,12 +45,16 @@ struct ar7_bin_rec { - unsigned int address; - }; - -+int create_titan_partitions(struct mtd_info *master, -+ struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data); -+ - static int create_mtd_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct ar7_bin_rec header; -- unsigned int offset; -+ unsigned int offset, mtd_start, mtd_end; - size_t len; - unsigned int pre_size = master->erasesize, post_size = 0; - unsigned int root_offset = ROOT_OFFSET; -@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct - int retries = 10; - struct mtd_partition *ar7_parts; - -+ const char *prom_str = prom_getenv("ProductID"); -+ char mtd_name[] = "mtd1"; -+ if(prom_str && -+ (strcmp(prom_str, "CYWL")==0 || -+ strcmp(prom_str, "CYWM")==0 || -+ strcmp(prom_str, "CYLM")==0 || -+ strcmp(prom_str, "CYLL")==0)){ -+ return create_titan_partitions(master, pparts, data); -+ } -+ - ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL); - if (!ar7_parts) - return -ENOMEM; -@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct - - pre_size = offset; - -- if (!ar7_parts[1].offset) { -- ar7_parts[1].offset = master->size - master->erasesize; -- post_size = master->erasesize; -- } -- - switch (header.checksum) { -- case LOADER_MAGIC1: -- while (header.length) { -- offset += sizeof(header) + header.length; -- mtd_read(master, offset, sizeof(header), &len, -- (uint8_t *)&header); -- } -- root_offset = offset + sizeof(header) + 4; -- break; - case LOADER_MAGIC2: -+ for (retries = 0; retries <= 9; retries++) { -+ mtd_name[3] = '0' + retries; -+ prom_str = prom_getenv(mtd_name); -+ if (prom_str == NULL) -+ continue; -+ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end); -+ if (pre_size == (mtd_start & 0x1ffffff)) { -+ ar7_parts[1].offset = mtd_end &= 0x1ffffff; -+ ar7_parts[1].size = post_size = master->size - mtd_end; -+ break; -+ } -+ } -+ case LOADER_MAGIC1: -+ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0; - while (header.length) { - offset += sizeof(header) + header.length; - mtd_read(master, offset, sizeof(header), &len, - (uint8_t *)&header); - } -- root_offset = offset + sizeof(header) + 4 + 0xff; -- root_offset &= ~(uint32_t)0xff; -+ root_offset += offset + sizeof(header); - break; - default: - printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum); - break; - } - -+ if (!ar7_parts[1].offset) { -+ post_size = master->erasesize; -+ ar7_parts[1].offset = master->size - post_size; -+ } -+ - mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header); - if (header.checksum != SQUASHFS_MAGIC) { - root_offset += master->erasesize - 1; ---- a/drivers/mtd/titanpart.c -+++ b/drivers/mtd/titanpart.c -@@ -149,7 +149,7 @@ static void titan_add_partition(char * e - } - int create_titan_partitions(struct mtd_info *master, - struct mtd_partition **pparts, -- unsigned long origin) -+ struct mtd_part_parser_data *data) - { - struct nsp_img_hdr_head hdr; - struct nsp_img_hdr_section_info sect_info; diff --git a/target/linux/ar7/patches-3.18/925-actiontec_leds.patch b/target/linux/ar7/patches-3.18/925-actiontec_leds.patch deleted file mode 100644 index 41af2cb54f..0000000000 --- a/target/linux/ar7/patches-3.18/925-actiontec_leds.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/arch/mips/ar7/platform.c -+++ b/arch/mips/ar7/platform.c -@@ -465,31 +465,22 @@ static struct gpio_led fb_fon_leds[] = { - }, - }; - --static struct gpio_led gt701_leds[] = { -+static struct gpio_led actiontec_leds[] = { - { - .name = "inet:green", - .gpio = 13, -- .active_low = 1, -- }, -- { -- .name = "usb", -- .gpio = 12, -- .active_low = 1, - }, - { - .name = "inet:red", - .gpio = 9, -- .active_low = 1, - }, - { -- .name = "power:red", -+ .name = "power:green", - .gpio = 7, -- .active_low = 1, - }, - { -- .name = "power:green", -+ .name = "power:red", - .gpio = 8, -- .active_low = 1, - .default_trigger = "default-on", - }, - { -@@ -497,6 +488,44 @@ static struct gpio_led gt701_leds[] = { - .gpio = 10, - .active_low = 1, - }, -+ { -+ .name = "wifi", -+ .gpio = 6, -+ .active_low = 1, -+ }, -+ { -+ .name = "wifi:red", -+ .gpio = 3, -+ }, -+ { -+ .name = "standby", -+ .gpio = 4, -+ }, -+ { -+ .name = "wps", -+ .gpio = 16, -+ .active_low = 1, -+ }, -+ { -+ .name = "usb", -+ .gpio = 12, -+ .active_low = 1, -+ }, -+ { -+ .name = "voip", -+ .gpio = 15, -+ .active_low = 1, -+ }, -+ { -+ .name = "line1", -+ .gpio = 23, -+ .active_low = 1, -+ }, -+ { -+ .name = "line2", -+ .gpio = 25, -+ .active_low = 1, -+ }, - }; - - static struct gpio_led_platform_data ar7_led_data; -@@ -540,9 +569,9 @@ static void __init detect_leds(void) - } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { - ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); - ar7_led_data.leds = titan_leds; -- } else if (strstr(prid, "GT701")) { -- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds); -- ar7_led_data.leds = gt701_leds; -+ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) { -+ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds); -+ ar7_led_data.leds = actiontec_leds; - } - } - diff --git a/target/linux/ar7/patches-3.18/950-cpmac_titan.patch b/target/linux/ar7/patches-3.18/950-cpmac_titan.patch deleted file mode 100644 index 3cabae067a..0000000000 --- a/target/linux/ar7/patches-3.18/950-cpmac_titan.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/drivers/net/ethernet/ti/cpmac.c -+++ b/drivers/net/ethernet/ti/cpmac.c -@@ -1147,6 +1147,8 @@ static int cpmac_probe(struct platform_d - goto out; - } - -+ ar7_device_reset(pdata->reset_bit); -+ - dev->irq = platform_get_irq_byname(pdev, "irq"); - - dev->netdev_ops = &cpmac_netdev_ops; -@@ -1228,7 +1230,7 @@ int cpmac_init(void) - cpmac_mii->reset = cpmac_mdio_reset; - cpmac_mii->irq = mii_irqs; - -- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256); -+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256); - - if (!cpmac_mii->priv) { - pr_err("Can't ioremap mdio registers\n"); -@@ -1239,10 +1241,16 @@ int cpmac_init(void) - /* FIXME: unhardcode gpio&reset bits */ - ar7_gpio_disable(26); - ar7_gpio_disable(27); -- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); -- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); -+ -+ if (!ar7_is_titan()) { -+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); -+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); -+ } - ar7_device_reset(AR7_RESET_BIT_EPHY); - -+ if (ar7_is_titan()) -+ ar7_device_reset(TITAN_RESET_BIT_EPHY1); -+ - cpmac_mii->reset(cpmac_mii); - - for (i = 0; i < 300; i++) { -@@ -1259,7 +1267,11 @@ int cpmac_init(void) - mask = 0; - } - -- cpmac_mii->phy_mask = ~(mask | 0x80000000); -+ if (ar7_is_titan()) -+ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000); -+ else -+ cpmac_mii->phy_mask = ~(mask | 0x80000000); -+ - snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1"); - - res = mdiobus_register(cpmac_mii); |