diff options
Diffstat (limited to 'target/linux')
3 files changed, 175 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch b/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch new file mode 100644 index 0000000000..0cd7da1f6d --- /dev/null +++ b/target/linux/ipq806x/patches/011-watchdog-qcom-use-timer-devicetree-binding.patch @@ -0,0 +1,72 @@ +From fded70251b1b58f68de1d3757ece9965f0b75452 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Thu, 19 Feb 2015 20:19:30 -0800 +Subject: [PATCH 1/3] watchdog: qcom: use timer devicetree binding + +MSM watchdog configuration happens in the same register block as the +timer, so we'll use the same binding as the existing timer. + +The qcom-wdt will now be probed when devicetree has an entry compatible +with "qcom,kpss-timer" or "qcom-scss-timer". + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + drivers/watchdog/qcom-wdt.c | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c +index aa85618..aa03ca8 100644 +--- a/drivers/watchdog/qcom-wdt.c ++++ b/drivers/watchdog/qcom-wdt.c +@@ -20,9 +20,9 @@ + #include <linux/reboot.h> + #include <linux/watchdog.h> + +-#define WDT_RST 0x0 +-#define WDT_EN 0x8 +-#define WDT_BITE_TIME 0x24 ++#define WDT_RST 0x38 ++#define WDT_EN 0x40 ++#define WDT_BITE_TIME 0x5C + + struct qcom_wdt { + struct watchdog_device wdd; +@@ -117,6 +117,8 @@ static int qcom_wdt_probe(struct platform_device *pdev) + { + struct qcom_wdt *wdt; + struct resource *res; ++ struct device_node *np = pdev->dev.of_node; ++ u32 percpu_offset; + int ret; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); +@@ -124,6 +126,14 @@ static int qcom_wdt_probe(struct platform_device *pdev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ /* We use CPU0's DGT for the watchdog */ ++ if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) ++ percpu_offset = 0; ++ ++ res->start += percpu_offset; ++ res->end += percpu_offset; ++ + wdt->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); +@@ -203,9 +213,8 @@ static int qcom_wdt_remove(struct platform_device *pdev) + } + + static const struct of_device_id qcom_wdt_of_table[] = { +- { .compatible = "qcom,kpss-wdt-msm8960", }, +- { .compatible = "qcom,kpss-wdt-apq8064", }, +- { .compatible = "qcom,kpss-wdt-ipq8064", }, ++ { .compatible = "qcom,kpss-timer" }, ++ { .compatible = "qcom,scss-timer" }, + { }, + }; + MODULE_DEVICE_TABLE(of, qcom_wdt_of_table); +-- +1.9.1 + diff --git a/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch b/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch new file mode 100644 index 0000000000..24a093a812 --- /dev/null +++ b/target/linux/ipq806x/patches/012-ARM-qcom-add-description-of-KPSS-WDT-for-IPQ8064.patch @@ -0,0 +1,53 @@ +From 297cf8136ecd6a56520888fd28948393766b8ee7 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Thu, 19 Feb 2015 20:27:39 -0800 +Subject: [PATCH 2/3] ARM: qcom: add description of KPSS WDT for IPQ8064 + +Add the watchdog related entries to the Krait Processor Sub-system +(KPSS) timer IPQ8064 devicetree section. Also, add a fixed-clock +description of SLEEP_CLK, which will do for now. + +Signed-off-by: Josh Cartwright <joshc@codeaurora.org> +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++++++++++++- + 1 file changed, 13 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi +index cb225da..d01f618 100644 +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -60,6 +60,14 @@ + }; + }; + ++ clocks { ++ sleep_clk: sleep_clk { ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++ #clock-cells = <0>; ++ }; ++ }; ++ + soc: soc { + #address-cells = <1>; + #size-cells = <1>; +@@ -89,10 +97,14 @@ + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, +- <1 3 0x301>; ++ <1 3 0x301>, ++ <1 4 0x301>, ++ <1 5 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; ++ clocks = <&sleep_clk>; ++ clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + +-- +1.9.1 + diff --git a/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch b/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch new file mode 100644 index 0000000000..6876768962 --- /dev/null +++ b/target/linux/ipq806x/patches/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch @@ -0,0 +1,50 @@ +From e535f01dffb6dd9e09934fa219be52af3437a8f6 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Thu, 19 Feb 2015 20:36:27 -0800 +Subject: [PATCH 3/3] ARM: msm: add watchdog entries to DT timer binding doc + +The watchdog has been reworked to use the same DT node as the timer. +This change is updating the device tree doc accordingly. + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++--- + 1 file changed, 13 insertions(+), 3 deletions(-) + +--- a/Documentation/devicetree/bindings/arm/msm/timer.txt ++++ b/Documentation/devicetree/bindings/arm/msm/timer.txt +@@ -9,11 +9,17 @@ Properties: + "qcom,scss-timer" - scorpion subsystem + + - interrupts : Interrupts for the the debug timer, the first general purpose +- timer, and optionally a second general purpose timer in that +- order. ++ timer, and optionally a second general purpose timer, and ++ optionally as well, 2 watchdog interrupts, in that order. + + - reg : Specifies the base address of the timer registers. + ++- clocks: Reference to the parent clocks, one per output clock. The parents ++ must appear in the same order as the clock names. ++ ++- clock-names: The name of the clocks as free-form strings. They should be in ++ the same order as the clocks. ++ + - clock-frequency : The frequency of the debug timer and the general purpose + timer(s) in Hz in that order. + +@@ -29,9 +35,13 @@ Example: + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, +- <1 3 0x301>; ++ <1 3 0x301>, ++ <1 4 0x301>, ++ <1 5 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <19200000>, + <32768>; ++ clocks = <&sleep_clk>; ++ clock-names = "sleep"; + cpu-offset = <0x40000>; + }; |