diff options
Diffstat (limited to 'target/linux')
66 files changed, 0 insertions, 8335 deletions
diff --git a/target/linux/bcm53xx/config-3.18 b/target/linux/bcm53xx/config-3.18 deleted file mode 100644 index 424760ded0..0000000000 --- a/target/linux/bcm53xx/config-3.18 +++ /dev/null @@ -1,287 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y -# CONFIG_ARCH_BCM_63XX is not set -# CONFIG_ARCH_BCM_MOBILE is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -# CONFIG_ARCH_BRCMSTB is not set -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_ERRATA_798181=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_B53=y -# CONFIG_B53_MMAP_DRIVER is not set -# CONFIG_B53_PHY_DRIVER is not set -CONFIG_B53_SRAB_DRIVER=y -CONFIG_BCM47XX_NVRAM=y -CONFIG_BCM47XX_SPROM=y -CONFIG_BCM47XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_DEBUG=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BGMAC=y -CONFIG_BOUNCE=y -CONFIG_CACHE_L2X0=y -CONFIG_CACHE_PL310=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_XZ=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BCM_5301X=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x18000300 -# CONFIG_DEBUG_UART_PL01X is not set -CONFIG_DEBUG_UART_VIRT=0xf1000300 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_LIBFDT=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_BCM47XX_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_BCM=y -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MTD_SPI_BCM53XXSPIFLASH=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_BCM5301X=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PL310_ERRATA_588369 is not set -CONFIG_PL310_ERRATA_727915=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_PL310_ERRATA_769419=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_RCU_STALL_COMMON=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BCM53XX=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_STOP_MACHINE=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_XZ=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch b/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch deleted file mode 100644 index 281c12b2a6..0000000000 --- a/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch +++ /dev/null @@ -1,662 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -26,7 +26,38 @@ - /* Define max times to check status register before we give up. */ - #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ - --#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) -+#define SPI_NOR_MAX_ID_LEN 6 -+ -+struct flash_info { -+ /* -+ * This array stores the ID bytes. -+ * The first three bytes are the JEDIC ID. -+ * JEDEC ID zero means "no ID" (mostly older chips). -+ */ -+ u8 id[SPI_NOR_MAX_ID_LEN]; -+ u8 id_len; -+ -+ /* The size listed here is what works with SPINOR_OP_SE, which isn't -+ * necessarily called a "sector" by the vendor. -+ */ -+ unsigned sector_size; -+ u16 n_sectors; -+ -+ u16 page_size; -+ u16 addr_width; -+ -+ u16 flags; -+#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ -+#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ -+#define SST_WRITE 0x04 /* use SST byte programming */ -+#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ -+#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ -+#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ -+#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ -+#define USE_FSR 0x80 /* use flag status register */ -+}; -+ -+#define JEDEC_MFR(info) ((info)->id[0]) - - static const struct spi_device_id *spi_nor_match_id(const char *name); - -@@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cyc - case SPI_NOR_FAST: - case SPI_NOR_DUAL: - case SPI_NOR_QUAD: -- return 1; -+ return 8; - case SPI_NOR_NORMAL: - return 0; - } -@@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi - } - - /* Enable/disable 4-byte addressing mode. */ --static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable) -+static inline int set_4byte(struct spi_nor *nor, struct flash_info *info, -+ int enable) - { - int status; - bool need_wren = false; - u8 cmd; - -- switch (JEDEC_MFR(jedec_id)) { -+ switch (JEDEC_MFR(info)) { - case CFI_MFR_ST: /* Micron, actually */ - /* Some Micron need WREN command; all will accept it */ - need_wren = true; -@@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_n - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); - } - } -- --static int spi_nor_wait_till_ready(struct spi_nor *nor) -+static inline int spi_nor_sr_ready(struct spi_nor *nor) - { -- unsigned long deadline; -- int sr; -- -- deadline = jiffies + MAX_READY_WAIT_JIFFIES; -- -- do { -- cond_resched(); -+ int sr = read_sr(nor); -+ if (sr < 0) -+ return sr; -+ else -+ return !(sr & SR_WIP); -+} - -- sr = read_sr(nor); -- if (sr < 0) -- break; -- else if (!(sr & SR_WIP)) -- return 0; -- } while (!time_after_eq(jiffies, deadline)); -+static inline int spi_nor_fsr_ready(struct spi_nor *nor) -+{ -+ int fsr = read_fsr(nor); -+ if (fsr < 0) -+ return fsr; -+ else -+ return fsr & FSR_READY; -+} - -- return -ETIMEDOUT; -+static int spi_nor_ready(struct spi_nor *nor) -+{ -+ int sr, fsr; -+ sr = spi_nor_sr_ready(nor); -+ if (sr < 0) -+ return sr; -+ fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1; -+ if (fsr < 0) -+ return fsr; -+ return sr && fsr; - } - --static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor) -+/* -+ * Service routine to read status register until ready, or timeout occurs. -+ * Returns non-zero if error. -+ */ -+static int spi_nor_wait_till_ready(struct spi_nor *nor) - { - unsigned long deadline; -- int sr; -- int fsr; -+ int timeout = 0, ret; - - deadline = jiffies + MAX_READY_WAIT_JIFFIES; - -- do { -+ while (!timeout) { -+ if (time_after_eq(jiffies, deadline)) -+ timeout = 1; -+ -+ ret = spi_nor_ready(nor); -+ if (ret < 0) -+ return ret; -+ if (ret) -+ return 0; -+ - cond_resched(); -+ } - -- sr = read_sr(nor); -- if (sr < 0) { -- break; -- } else if (!(sr & SR_WIP)) { -- fsr = read_fsr(nor); -- if (fsr < 0) -- break; -- if (fsr & FSR_READY) -- return 0; -- } -- } while (!time_after_eq(jiffies, deadline)); -+ dev_err(nor->dev, "flash operation timed out\n"); - - return -ETIMEDOUT; - } - - /* -- * Service routine to read status register until ready, or timeout occurs. -- * Returns non-zero if error. -- */ --static int wait_till_ready(struct spi_nor *nor) --{ -- return nor->wait_till_ready(nor); --} -- --/* - * Erase the whole flash memory - * - * Returns 0 if successful, non-zero otherwise. - */ - static int erase_chip(struct spi_nor *nor) - { -- int ret; -- - dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); - -- /* Wait until finished previous write command. */ -- ret = wait_till_ready(nor); -- if (ret) -- return ret; -- -- /* Send write enable, then erase commands. */ -- write_enable(nor); -- - return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); - } - -@@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info - - /* whole-chip erase? */ - if (len == mtd->size) { -+ write_enable(nor); -+ - if (erase_chip(nor)) { - ret = -EIO; - goto erase_err; - } - -+ ret = spi_nor_wait_till_ready(nor); -+ if (ret) -+ goto erase_err; -+ - /* REVISIT in some cases we could speed up erasing large regions - * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up - * to use "small sector erase", but that's not always optimal. -@@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info - /* "sector"-at-a-time erase */ - } else { - while (len) { -+ write_enable(nor); -+ - if (nor->erase(nor, addr)) { - ret = -EIO; - goto erase_err; -@@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info - - addr += mtd->erasesize; - len -= mtd->erasesize; -+ -+ ret = spi_nor_wait_till_ready(nor); -+ if (ret) -+ goto erase_err; - } - } - -+ write_disable(nor); -+ - spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); - - instr->state = MTD_ERASE_DONE; -@@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info - if (ret) - return ret; - -- /* Wait until finished previous command */ -- ret = wait_till_ready(nor); -- if (ret) -- goto err; -- - status_old = read_sr(nor); - - if (offset < mtd->size - (mtd->size / 2)) -@@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_inf - if (ret) - return ret; - -- /* Wait until finished previous command */ -- ret = wait_till_ready(nor); -- if (ret) -- goto err; -- - status_old = read_sr(nor); - - if (offset+len > mtd->size - (mtd->size / 64)) -@@ -424,38 +453,34 @@ err: - return ret; - } - --struct flash_info { -- /* JEDEC id zero means "no ID" (most older chips); otherwise it has -- * a high byte of zero plus three data bytes: the manufacturer id, -- * then a two byte device id. -- */ -- u32 jedec_id; -- u16 ext_id; -- -- /* The size listed here is what works with SPINOR_OP_SE, which isn't -- * necessarily called a "sector" by the vendor. -- */ -- unsigned sector_size; -- u16 n_sectors; -- -- u16 page_size; -- u16 addr_width; -- -- u16 flags; --#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */ --#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */ --#define SST_WRITE 0x04 /* use SST byte programming */ --#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */ --#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ --#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ --#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ --#define USE_FSR 0x80 /* use flag status register */ --}; -- -+/* Used when the "_ext_id" is two bytes at most */ - #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ -- .jedec_id = (_jedec_id), \ -- .ext_id = (_ext_id), \ -+ .id = { \ -+ ((_jedec_id) >> 16) & 0xff, \ -+ ((_jedec_id) >> 8) & 0xff, \ -+ (_jedec_id) & 0xff, \ -+ ((_ext_id) >> 8) & 0xff, \ -+ (_ext_id) & 0xff, \ -+ }, \ -+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \ -+ .sector_size = (_sector_size), \ -+ .n_sectors = (_n_sectors), \ -+ .page_size = 256, \ -+ .flags = (_flags), \ -+ }) -+ -+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ -+ ((kernel_ulong_t)&(struct flash_info) { \ -+ .id = { \ -+ ((_jedec_id) >> 16) & 0xff, \ -+ ((_jedec_id) >> 8) & 0xff, \ -+ (_jedec_id) & 0xff, \ -+ ((_ext_id) >> 16) & 0xff, \ -+ ((_ext_id) >> 8) & 0xff, \ -+ (_ext_id) & 0xff, \ -+ }, \ -+ .id_len = 6, \ - .sector_size = (_sector_size), \ - .n_sectors = (_n_sectors), \ - .page_size = 256, \ -@@ -507,6 +532,9 @@ static const struct spi_device_id spi_no - { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, - { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, - -+ /* Fujitsu */ -+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) }, -+ - /* GigaDevice */ - { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, - { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, -@@ -536,6 +564,7 @@ static const struct spi_device_id spi_no - { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, - - /* Micron */ -+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, - { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, -@@ -560,6 +589,7 @@ static const struct spi_device_id spi_no - { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, - { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, - { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, -+ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, - { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, - { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, - { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, -@@ -582,6 +612,7 @@ static const struct spi_device_id spi_no - { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, - { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, - { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, -+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, - - /* ST Microelectronics -- newer production may have feature updates */ - { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) }, -@@ -593,7 +624,6 @@ static const struct spi_device_id spi_no - { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, - { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, - { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, -- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, - - { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, - { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, -@@ -649,32 +679,24 @@ static const struct spi_device_id spi_no - static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) - { - int tmp; -- u8 id[5]; -- u32 jedec; -- u16 ext_jedec; -+ u8 id[SPI_NOR_MAX_ID_LEN]; - struct flash_info *info; - -- tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5); -+ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); - if (tmp < 0) { - dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); - return ERR_PTR(tmp); - } -- jedec = id[0]; -- jedec = jedec << 8; -- jedec |= id[1]; -- jedec = jedec << 8; -- jedec |= id[2]; -- -- ext_jedec = id[3] << 8 | id[4]; - - for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = (void *)spi_nor_ids[tmp].driver_data; -- if (info->jedec_id == jedec) { -- if (info->ext_id == 0 || info->ext_id == ext_jedec) -+ if (info->id_len) { -+ if (!memcmp(info->id, id, info->id_len)) - return &spi_nor_ids[tmp]; - } - } -- dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec); -+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n", -+ id[0], id[1], id[2]); - return ERR_PTR(-ENODEV); - } - -@@ -709,11 +731,6 @@ static int sst_write(struct mtd_info *mt - if (ret) - return ret; - -- /* Wait until finished previous write command. */ -- ret = wait_till_ready(nor); -- if (ret) -- goto time_out; -- - write_enable(nor); - - nor->sst_write_second = false; -@@ -725,7 +742,7 @@ static int sst_write(struct mtd_info *mt - - /* write one byte. */ - nor->write(nor, to, 1, retlen, buf); -- ret = wait_till_ready(nor); -+ ret = spi_nor_wait_till_ready(nor); - if (ret) - goto time_out; - } -@@ -737,7 +754,7 @@ static int sst_write(struct mtd_info *mt - - /* write two bytes. */ - nor->write(nor, to, 2, retlen, buf + actual); -- ret = wait_till_ready(nor); -+ ret = spi_nor_wait_till_ready(nor); - if (ret) - goto time_out; - to += 2; -@@ -746,7 +763,7 @@ static int sst_write(struct mtd_info *mt - nor->sst_write_second = false; - - write_disable(nor); -- ret = wait_till_ready(nor); -+ ret = spi_nor_wait_till_ready(nor); - if (ret) - goto time_out; - -@@ -757,7 +774,7 @@ static int sst_write(struct mtd_info *mt - nor->program_opcode = SPINOR_OP_BP; - nor->write(nor, to, 1, retlen, buf + actual); - -- ret = wait_till_ready(nor); -+ ret = spi_nor_wait_till_ready(nor); - if (ret) - goto time_out; - write_disable(nor); -@@ -785,11 +802,6 @@ static int spi_nor_write(struct mtd_info - if (ret) - return ret; - -- /* Wait until finished previous write command. */ -- ret = wait_till_ready(nor); -- if (ret) -- goto write_err; -- - write_enable(nor); - - page_offset = to & (nor->page_size - 1); -@@ -808,16 +820,20 @@ static int spi_nor_write(struct mtd_info - if (page_size > nor->page_size) - page_size = nor->page_size; - -- wait_till_ready(nor); -+ ret = spi_nor_wait_till_ready(nor); -+ if (ret) -+ goto write_err; -+ - write_enable(nor); - - nor->write(nor, to + i, page_size, retlen, buf + i); - } - } - -+ ret = spi_nor_wait_till_ready(nor); - write_err: - spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); -- return 0; -+ return ret; - } - - static int macronix_quad_enable(struct spi_nor *nor) -@@ -830,7 +846,7 @@ static int macronix_quad_enable(struct s - nor->cmd_buf[0] = val | SR_QUAD_EN_MX; - nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); - -- if (wait_till_ready(nor)) -+ if (spi_nor_wait_till_ready(nor)) - return 1; - - ret = read_sr(nor); -@@ -880,11 +896,11 @@ static int spansion_quad_enable(struct s - return 0; - } - --static int set_quad_mode(struct spi_nor *nor, u32 jedec_id) -+static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) - { - int status; - -- switch (JEDEC_MFR(jedec_id)) { -+ switch (JEDEC_MFR(info)) { - case CFI_MFR_MACRONIX: - status = macronix_quad_enable(nor); - if (status) { -@@ -910,11 +926,6 @@ static int spi_nor_check(struct spi_nor - return -EINVAL; - } - -- if (!nor->read_id) -- nor->read_id = spi_nor_read_id; -- if (!nor->wait_till_ready) -- nor->wait_till_ready = spi_nor_wait_till_ready; -- - return 0; - } - -@@ -932,16 +943,24 @@ int spi_nor_scan(struct spi_nor *nor, co - if (ret) - return ret; - -- id = spi_nor_match_id(name); -- if (!id) -+ /* Try to auto-detect if chip name wasn't specified */ -+ if (!name) -+ id = spi_nor_read_id(nor); -+ else -+ id = spi_nor_match_id(name); -+ if (IS_ERR_OR_NULL(id)) - return -ENOENT; - - info = (void *)id->driver_data; - -- if (info->jedec_id) { -+ /* -+ * If caller has specified name of flash model that can normally be -+ * detected using JEDEC, let's verify it. -+ */ -+ if (name && info->id_len) { - const struct spi_device_id *jid; - -- jid = nor->read_id(nor); -+ jid = spi_nor_read_id(nor); - if (IS_ERR(jid)) { - return PTR_ERR(jid); - } else if (jid != id) { -@@ -966,9 +985,9 @@ int spi_nor_scan(struct spi_nor *nor, co - * up with the software protection bits set - */ - -- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || -- JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || -- JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { -+ if (JEDEC_MFR(info) == CFI_MFR_ATMEL || -+ JEDEC_MFR(info) == CFI_MFR_INTEL || -+ JEDEC_MFR(info) == CFI_MFR_SST) { - write_enable(nor); - write_sr(nor, 0); - } -@@ -983,7 +1002,7 @@ int spi_nor_scan(struct spi_nor *nor, co - mtd->_read = spi_nor_read; - - /* nor protection support for STmicro chips */ -- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) { -+ if (JEDEC_MFR(info) == CFI_MFR_ST) { - mtd->_lock = spi_nor_lock; - mtd->_unlock = spi_nor_unlock; - } -@@ -994,9 +1013,8 @@ int spi_nor_scan(struct spi_nor *nor, co - else - mtd->_write = spi_nor_write; - -- if ((info->flags & USE_FSR) && -- nor->wait_till_ready == spi_nor_wait_till_ready) -- nor->wait_till_ready = spi_nor_wait_till_fsr_ready; -+ if (info->flags & USE_FSR) -+ nor->flags |= SNOR_F_USE_FSR; - - #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - /* prefer "small sector" erase if possible */ -@@ -1037,7 +1055,7 @@ int spi_nor_scan(struct spi_nor *nor, co - - /* Quad/Dual-read mode takes precedence over fast/normal */ - if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { -- ret = set_quad_mode(nor, info->jedec_id); -+ ret = set_quad_mode(nor, info); - if (ret) { - dev_err(dev, "quad mode not supported\n"); - return ret; -@@ -1073,7 +1091,7 @@ int spi_nor_scan(struct spi_nor *nor, co - else if (mtd->size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - nor->addr_width = 4; -- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) { -+ if (JEDEC_MFR(info) == CFI_MFR_AMD) { - /* Dedicated 4-byte command set */ - switch (nor->flash_read) { - case SPI_NOR_QUAD: -@@ -1094,7 +1112,7 @@ int spi_nor_scan(struct spi_nor *nor, co - nor->erase_opcode = SPINOR_OP_SE_4B; - mtd->erasesize = info->sector_size; - } else -- set_4byte(nor, info->jedec_id, 1); -+ set_4byte(nor, info, 1); - } else { - nor->addr_width = 3; - } ---- a/include/linux/mtd/spi-nor.h -+++ b/include/linux/mtd/spi-nor.h -@@ -116,6 +116,10 @@ enum spi_nor_ops { - SPI_NOR_OPS_UNLOCK, - }; - -+enum spi_nor_option_flags { -+ SNOR_F_USE_FSR = BIT(0), -+}; -+ - /** - * struct spi_nor - Structure for defining a the SPI NOR layer - * @mtd: point to a mtd_info structure -@@ -129,6 +133,7 @@ enum spi_nor_ops { - * @program_opcode: the program opcode - * @flash_read: the mode of the read - * @sst_write_second: used by the SST write operation -+ * @flags: flag options for the current SPI-NOR (SNOR_F_*) - * @cfg: used by the read_xfer/write_xfer - * @cmd_buf: used by the write_reg - * @prepare: [OPTIONAL] do some preparations for the -@@ -139,9 +144,6 @@ enum spi_nor_ops { - * @write_xfer: [OPTIONAL] the writefundamental primitive - * @read_reg: [DRIVER-SPECIFIC] read out the register - * @write_reg: [DRIVER-SPECIFIC] write data to the register -- * @read_id: [REPLACEABLE] read out the ID data, and find -- * the proper spi_device_id -- * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready - * @read: [DRIVER-SPECIFIC] read data from the SPI NOR - * @write: [DRIVER-SPECIFIC] write data to the SPI NOR - * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR -@@ -160,6 +162,7 @@ struct spi_nor { - u8 program_opcode; - enum read_mode flash_read; - bool sst_write_second; -+ u32 flags; - struct spi_nor_xfer_cfg cfg; - u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; - -@@ -172,8 +175,6 @@ struct spi_nor { - int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); - int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, - int write_enable); -- const struct spi_device_id *(*read_id)(struct spi_nor *nor); -- int (*wait_till_ready)(struct spi_nor *nor); - - int (*read)(struct spi_nor *nor, loff_t from, - size_t len, size_t *retlen, u_char *read_buf); diff --git a/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch b/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch deleted file mode 100644 index e2ef75e3dc..0000000000 --- a/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch +++ /dev/null @@ -1,116 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -538,6 +538,7 @@ static const struct spi_device_id spi_no - /* GigaDevice */ - { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) }, - { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) }, -+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, -@@ -564,14 +565,14 @@ static const struct spi_device_id spi_no - { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, - - /* Micron */ -- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, -- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, -- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) }, -- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, -- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, -- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, -- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, -- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) }, -+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, -+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) }, -+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, -+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, -+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, -+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, -+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, - - /* PMC */ - { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, -@@ -896,6 +897,45 @@ static int spansion_quad_enable(struct s - return 0; - } - -+static int micron_quad_enable(struct spi_nor *nor) -+{ -+ int ret; -+ u8 val; -+ -+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); -+ if (ret < 0) { -+ dev_err(nor->dev, "error %d reading EVCR\n", ret); -+ return ret; -+ } -+ -+ write_enable(nor); -+ -+ /* set EVCR, enable quad I/O */ -+ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; -+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); -+ if (ret < 0) { -+ dev_err(nor->dev, "error while writing EVCR register\n"); -+ return ret; -+ } -+ -+ ret = spi_nor_wait_till_ready(nor); -+ if (ret) -+ return ret; -+ -+ /* read EVCR and check it */ -+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1); -+ if (ret < 0) { -+ dev_err(nor->dev, "error %d reading EVCR\n", ret); -+ return ret; -+ } -+ if (val & EVCR_QUAD_EN_MICRON) { -+ dev_err(nor->dev, "Micron EVCR Quad bit not clear\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ - static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) - { - int status; -@@ -908,6 +948,13 @@ static int set_quad_mode(struct spi_nor - return -EINVAL; - } - return status; -+ case CFI_MFR_ST: -+ status = micron_quad_enable(nor); -+ if (status) { -+ dev_err(nor->dev, "Micron quad-read not enabled\n"); -+ return -EINVAL; -+ } -+ return status; - default: - status = spansion_quad_enable(nor); - if (status) { ---- a/include/linux/mtd/spi-nor.h -+++ b/include/linux/mtd/spi-nor.h -@@ -56,6 +56,10 @@ - /* Used for Spansion flashes only. */ - #define SPINOR_OP_BRWR 0x17 /* Bank register write */ - -+/* Used for Micron flashes only. */ -+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ -+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ -+ - /* Status Register bits. */ - #define SR_WIP 1 /* Write in progress */ - #define SR_WEL 2 /* Write enable latch */ -@@ -67,6 +71,9 @@ - - #define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ - -+/* Enhanced Volatile Configuration Register bits */ -+#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */ -+ - /* Flag Status Register bits */ - #define FSR_READY 0x80 - diff --git a/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch deleted file mode 100644 index c9dc041062..0000000000 --- a/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 14 Sep 2014 21:43:40 +0200 -Subject: [PATCH] ARM: BCM5301X: fix early serial console - -This device actually has a 8250 serial with a shift of 0. -Tested this on a BCM4708. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- - arch/arm/Kconfig.debug | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -113,7 +113,7 @@ choice - config DEBUG_BCM_5301X - bool "Kernel low-level debugging on BCM5301X UART1" - depends on ARCH_BCM_5301X -- select DEBUG_UART_PL01X -+ select DEBUG_UART_8250 - - config DEBUG_BCM_KONA_UART - bool "Kernel low-level debugging messages via BCM KONA UART" -@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT - config DEBUG_UART_8250_SHIFT - int "Register offset shift for the 8250 debug UART" - depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 -- default 0 if FOOTBRIDGE || ARCH_IOP32X -+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X - default 2 - - config DEBUG_UART_8250_WORD diff --git a/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch b/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch deleted file mode 100644 index ac52aa0162..0000000000 --- a/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch +++ /dev/null @@ -1,43 +0,0 @@ -From a2533caee935fff97e3e8dbfad5cc159e6bf6034 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 1 Oct 2014 09:21:07 +0200 -Subject: [PATCH 1/2] ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -8,6 +8,7 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - -+#include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include "skeleton.dtsi" -@@ -92,4 +93,19 @@ - clock-frequency = <400000000>; - }; - }; -+ -+ axi@18000000 { -+ compatible = "brcm,bus-axi"; -+ reg = <0x18000000 0x1000>; -+ ranges = <0x00000000 0x18000000 0x00100000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ chipcommon: chipcommon@0 { -+ reg = <0x00000000 0x1000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ }; -+ }; - }; diff --git a/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch b/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch deleted file mode 100644 index c394f3c481..0000000000 --- a/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch +++ /dev/null @@ -1,54 +0,0 @@ -From b7e4d148906685882a081e7e50692313c5a8724e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 1 Oct 2014 09:23:09 +0200 -Subject: [PATCH 2/2] ARM: BCM5301X: Add LEDs for Netgear R6250 V1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 34 +++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -32,4 +32,38 @@ - status = "okay"; - }; - }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ logo { -+ label = "bcm53xx:white:logo"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power0 { -+ label = "bcm53xx:green:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb { -+ label = "bcm53xx:blue:usb"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless { -+ label = "bcm53xx:blue:wireless"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; - }; diff --git a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch deleted file mode 100644 index 35cd0ca90a..0000000000 --- a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch +++ /dev/null @@ -1,58 +0,0 @@ -From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Wed, 24 Sep 2014 23:50:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file - -IRQ support for Broadcom's bus-axi driver bcma was merged into John -Linville's wireless tree and will show up in 3.19. This patch makes use -of this feature in the DTS file for the the BCM5301X SoCs. I left the -PCIe controller out, because this still needs some discussion. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -101,6 +101,40 @@ - #address-cells = <1>; - #size-cells = <1>; - -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0x000fffff 0xffff>; -+ interrupt-map = -+ /* ChipCommon */ -+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 2.0 Controller */ -+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 3.0 Controller */ -+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 0 */ -+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 1 */ -+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 2 */ -+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 3 */ -+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* NAND Controller */ -+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -+ - chipcommon: chipcommon@0 { - reg = <0x00000000 0x1000>; - diff --git a/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch deleted file mode 100644 index 2b9b900064..0000000000 --- a/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch +++ /dev/null @@ -1,57 +0,0 @@ -From f6f8234439737171e571a41264280e844a429699 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 30 Nov 2014 18:28:29 +0100 -Subject: [PATCH] ARM: BCM5301X: Add buttons for Netgear R6250 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 25 +++++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 1 + - 2 files changed, 26 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -66,4 +66,29 @@ - linux,default-trigger = "default-off"; - }; - }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <200>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ }; -+ }; - }; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -9,6 +9,7 @@ - */ - - #include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include "skeleton.dtsi" diff --git a/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch b/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch deleted file mode 100644 index 48a4c7c3b6..0000000000 --- a/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch +++ /dev/null @@ -1,116 +0,0 @@ -From 302a5ef29d497449280422576a1b55c72fc0ba4c Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 4 Dec 2014 10:22:02 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R6300 V2 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 4 +- - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 84 ++++++++++++++++++++++++++ - 2 files changed, 87 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -54,7 +54,9 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4e - dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb - dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb --dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb -+dtb-$(CONFIG_ARCH_BCM_5301X) += \ -+ bcm4708-netgear-r6250.dtb \ -+ bcm4708-netgear-r6300-v2.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ - bcm21664-garnet.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -0,0 +1,84 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R6300 V2 -+ * -+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "netgear,r6300v2", "brcm,bcm4708"; -+ model = "Netgear R6300 V2 (BCM4708)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ logo { -+ label = "bcm53xx:white:logo"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power0 { -+ label = "bcm53xx:green:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb { -+ label = "bcm53xx:blue:usb"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless { -+ label = "bcm53xx:blue:wireless"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <200>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch deleted file mode 100644 index d7114f51ab..0000000000 --- a/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch +++ /dev/null @@ -1,93 +0,0 @@ -From e336a14d2a2aa4431a8acc9eb3305b37f26fb696 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 4 Dec 2014 10:22:58 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 64 +++++++++++++++++++++++ - 2 files changed, 65 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb. - dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ -+ bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -0,0 +1,64 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Buffalo WZR-1750DHP -+ * -+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; -+ model = "Buffalo WZR-1750DHP (BCM4708)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <200>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ aoss { -+ label = "AOSS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Commit mode set by switch? */ -+ mode { -+ label = "Mode"; -+ linux,code = <KEY_SETUP>; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Switch: AP mode */ -+ sw_ap { -+ label = "AP"; -+ linux,code = <BTN_0>; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ eject { -+ label = "USB eject"; -+ linux,code = <KEY_EJECTCD>; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch b/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch deleted file mode 100644 index 93d5a2c287..0000000000 --- a/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch +++ /dev/null @@ -1,140 +0,0 @@ -From ae2ed35a40007bf737da452df7081a453bf89ce3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 4 Dec 2014 10:23:33 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-N18U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 78 +++++++++++++++++++++++++++++ - arch/arm/boot/dts/bcm47081.dtsi | 26 ++++++++++ - 3 files changed, 106 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts - create mode 100644 arch/arm/boot/dts/bcm47081.dtsi - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp - dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-netgear-r6250.dtb \ -- bcm4708-netgear-r6300-v2.dtb -+ bcm4708-netgear-r6300-v2.dtb \ -+ bcm47081-asus-rt-n18u.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ - bcm21664-garnet.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -0,0 +1,78 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Asus RT-N18U -+ * -+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47081.dtsi" -+ -+/ { -+ compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; -+ model = "Asus RT-N18U (BCM47081)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power { -+ label = "bcm53xx:blue:power"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb2 { -+ label = "bcm53xx:blue:usb2"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan { -+ label = "bcm53xx:blue:wan"; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ lan { -+ label = "bcm53xx:blue:lan"; -+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:blue:usb3"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <200>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47081.dtsi -@@ -0,0 +1,26 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for BCM47081 SoC. -+ * -+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcm5301x.dtsi" -+ -+/ { -+ compatible = "brcm,bcm47081"; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a9"; -+ next-level-cache = <&L2>; -+ reg = <0x0>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch b/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch deleted file mode 100644 index d1551133c4..0000000000 --- a/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch +++ /dev/null @@ -1,88 +0,0 @@ -From dd7733da69f198f576d7f52f6bc5a860fe24930d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 4 Dec 2014 10:24:02 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 57 ++++++++++++++++++++++ - 2 files changed, 59 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb \ -- bcm47081-asus-rt-n18u.dtb -+ bcm47081-asus-rt-n18u.dtb \ -+ bcm47081-buffalo-wzr-600dhp2.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ - bcm21664-garnet.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -0,0 +1,57 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Buffalo WZR-600DHP2 -+ * -+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47081.dtsi" -+ -+/ { -+ compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; -+ model = "Buffalo WZR-600DHP2 (BCM47081)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <200>; -+ -+ aoss { -+ label = "AOSS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Switch device mode? */ -+ mode { -+ label = "Mode"; -+ linux,code = <KEY_SETUP>; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ }; -+ -+ eject { -+ label = "USB eject"; -+ linux,code = <KEY_EJECTCD>; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch deleted file mode 100644 index a82f4d8f22..0000000000 --- a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch +++ /dev/null @@ -1,89 +0,0 @@ -From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001 -From: Dan Haab <dhaab@luxul.com> -Date: Mon, 19 Jan 2015 12:45:37 -0700 -Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000 - -Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only -unusual thing in its DTS file is "ubi" partition on NAND flash. - -Signed-off-by: Dan Haab <dhaab@luxul.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++ - 2 files changed, 61 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amar - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-buffalo-wzr-1750dhp.dtb \ -+ bcm4708-luxul-xwc-1000.dtb \ - bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb \ - bcm47081-asus-rt-n18u.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -0,0 +1,60 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Luxul XWC-1000 -+ * -+ * Copyright 2014 Luxul Inc. -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "luxul,xwc-1000", "brcm,bcm4708"; -+ model = "Luxul XWC-1000 (BCM4708)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ axi@18000000 { -+ nand@28000 { -+ reg = <0x00028000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "ubi"; -+ reg = <0x00000000 0x08000000>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "timer"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch b/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch deleted file mode 100644 index 414aa3ca8c..0000000000 --- a/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 78b745a4b05c920beaa66dfb140af134b5fc2425 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 14 Jan 2015 08:20:48 +0100 -Subject: [PATCH] ARM: BCM5301X: Drop unused poll-interval from gpio-keys -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It was accidentally left (& copied & pasted all around) from our -experiments with gpio-keys-polled. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 1 - - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 1 - - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 1 - - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 1 - - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 1 - - 5 files changed, 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -27,7 +27,6 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- poll-interval = <200>; - - restart { - label = "Reset"; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -71,7 +71,6 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- poll-interval = <200>; - - wps { - label = "WPS"; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -61,7 +61,6 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- poll-interval = <200>; - - wps { - label = "WPS"; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -61,7 +61,6 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- poll-interval = <200>; - - restart { - label = "Reset"; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -27,7 +27,6 @@ - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; -- poll-interval = <200>; - - aoss { - label = "AOSS"; diff --git a/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch b/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch deleted file mode 100644 index 8e46d39ea5..0000000000 --- a/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch +++ /dev/null @@ -1,167 +0,0 @@ -From 8115a4e8d687427fbc1aa3774f50551563bf87f9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 14 Jan 2015 08:20:49 +0100 -Subject: [PATCH] ARM: BCM5301X: Add LEDs for Buffalo devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 67 ++++++++++++++++++++++ - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 67 ++++++++++++++++++++++ - 2 files changed, 134 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -23,6 +23,73 @@ - reg = <0x00000000 0x08000000>; - }; - -+ spi { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&chipcommon 7 0>; -+ gpio-mosi = <&chipcommon 4 0>; -+ cs-gpios = <&chipcommon 6 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hc595: gpio_spi@0 { -+ compatible = "fairchild,74hc595"; -+ reg = <0>; -+ registers-number = <1>; -+ spi-max-frequency = <100000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power0 { -+ label = "bcm53xx:red:power"; -+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:white:power"; -+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ router0 { -+ label = "bcm53xx:blue:router"; -+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ router1 { -+ label = "bcm53xx:amber:router"; -+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan { -+ label = "bcm53xx:blue:wan"; -+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wireless0 { -+ label = "bcm53xx:blue:wireless"; -+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless1 { -+ label = "bcm53xx:amber:wireless"; -+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -23,6 +23,73 @@ - reg = <0x00000000 0x08000000>; - }; - -+ spi { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&chipcommon 7 0>; -+ gpio-mosi = <&chipcommon 4 0>; -+ cs-gpios = <&chipcommon 6 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hc595: gpio_spi@0 { -+ compatible = "fairchild,74hc595"; -+ reg = <0>; -+ registers-number = <1>; -+ spi-max-frequency = <100000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power0 { -+ label = "bcm53xx:green:power"; -+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:red:power"; -+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ router0 { -+ label = "bcm53xx:green:router"; -+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ router1 { -+ label = "bcm53xx:amber:router"; -+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan { -+ label = "bcm53xx:green:wan"; -+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wireless0 { -+ label = "bcm53xx:green:wireless"; -+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless1 { -+ label = "bcm53xx:amber:wireless"; -+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; diff --git a/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch deleted file mode 100644 index b33dd44460..0000000000 --- a/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 5b1864b899d2b591402704dd0f6528c8661f1817 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 20 Jan 2015 22:42:16 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 37 +++++++++++++++++++++++ - 2 files changed, 39 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -60,7 +60,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb \ - bcm47081-asus-rt-n18u.dtb \ -- bcm47081-buffalo-wzr-600dhp2.dtb -+ bcm47081-buffalo-wzr-600dhp2.dtb \ -+ bcm47081-buffalo-wzr-900dhp.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ - bcm21664-garnet.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -0,0 +1,37 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Buffalo WZR-900DHP -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm47081.dtsi" -+ -+/ { -+ compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; -+ model = "Buffalo WZR-900DHP (BCM47081)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch b/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch deleted file mode 100644 index 7508161859..0000000000 --- a/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 4076b521cb50c411467c4ba65f82ef0079823357 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 18 Feb 2015 12:25:42 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8000 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Reported-by: Ian Kent <raven@themaw.net> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 77 +++++++++++++++++++++++++++++ - 2 files changed, 79 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r8000.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -61,7 +61,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-netgear-r6300-v2.dtb \ - bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb \ -- bcm47081-buffalo-wzr-900dhp.dtb -+ bcm47081-buffalo-wzr-900dhp.dtb \ -+ bcm4709-netgear-r8000.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ - bcm21664-garnet.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -0,0 +1,77 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R8000 -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R8000 (BCM4709)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power0 { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power1 { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 5ghz-1 { -+ label = "bcm53xx:white:5ghz-1"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:white:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch b/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch deleted file mode 100644 index f719f35c20..0000000000 --- a/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 7875b470c9d80dff2d58ae9692adb3a2b5814a89 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Fri, 20 Feb 2015 11:22:05 +0100 -Subject: [PATCH] ARM: BCM5301X: Fix default state of power LEDs on Netgear - R6250 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We want green LED to be enabled by default. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -45,13 +45,13 @@ - power0 { - label = "bcm53xx:green:power"; - gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "default-off"; -+ linux,default-trigger = "default-on"; - }; - - power1 { - label = "bcm53xx:amber:power"; - gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -- linux,default-trigger = "default-on"; -+ linux,default-trigger = "default-off"; - }; - - usb { diff --git a/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch deleted file mode 100644 index 290ea0aea9..0000000000 --- a/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 35ad0e50bd6683c6699586e3bd5045f0695586d9 Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@openwrt.org> -Date: Wed, 13 May 2015 09:10:51 +0200 -Subject: [PATCH] ARM: BCM5301X: Add USB LED for Buffalo WZR-1750DHP - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -47,6 +47,12 @@ - leds { - compatible = "gpio-leds"; - -+ usb { -+ label = "bcm53xx:blue:usb"; -+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ - power0 { - label = "bcm53xx:red:power"; - gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch b/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch deleted file mode 100644 index 4bf5e0491c..0000000000 --- a/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 35eecd10ee57b9d4f31e12598296b235ed2b34ae Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@openwrt.org> -Date: Wed, 13 May 2015 09:10:52 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 127 ++++++++++++++++++++++ - 2 files changed, 128 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb \ - bcm47081-buffalo-wzr-900dhp.dtb \ -+ bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-netgear-r8000.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -0,0 +1,127 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Buffalo WXR-1900DHP -+ * -+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Buffalo WXR-1900DHP"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ usb { -+ label = "bcm53xx:green:usb"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power-amber { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power-white { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ router-amber { -+ label = "bcm53xx:amber:router"; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ router-white { -+ label = "bcm53xx:white:router"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan-amber { -+ label = "bcm53xx:amber:wan"; -+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan-white { -+ label = "bcm53xx:white:wan"; -+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless-amber { -+ label = "bcm53xx:amber:wireless"; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless-white { -+ label = "bcm53xx:white:wireless"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ power { -+ label = "Power"; -+ linux,code = <KEY_POWER>; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ -+ aoss { -+ label = "AOSS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Commit mode set by switch? */ -+ mode { -+ label = "Mode"; -+ linux,code = <KEY_SETUP>; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ }; -+ -+ /* Switch: AP mode */ -+ sw_ap { -+ label = "AP"; -+ linux,code = <BTN_0>; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ }; -+ -+ eject { -+ label = "USB eject"; -+ linux,code = <KEY_EJECTCD>; -+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch b/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch deleted file mode 100644 index 2213d3b76e..0000000000 --- a/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch +++ /dev/null @@ -1,148 +0,0 @@ -From 691917f20cae813d242f7123a4dc97e7d48e6ff1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 13 May 2015 09:10:53 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for SmartRG SR400ac -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 119 ++++++++++++++++++++++++++ - 2 files changed, 120 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-luxul-xwc-1000.dtb \ - bcm4708-netgear-r6250.dtb \ - bcm4708-netgear-r6300-v2.dtb \ -+ bcm4708-smartrg-sr400ac.dtb \ - bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb \ - bcm47081-buffalo-wzr-900dhp.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -0,0 +1,119 @@ -+/* -+ * Broadcom BCM470X / BCM5301X arm platform code. -+ * DTS for SmartRG SR400ac -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "smartrg,sr400ac", "brcm,bcm4708"; -+ model = "SmartRG SR400ac"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power-white { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power-amber { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb2 { -+ label = "bcm53xx:white:usb2"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb3-white { -+ label = "bcm53xx:white:usb3"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb3-green { -+ label = "bcm53xx:green:usb3"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wps { -+ label = "bcm53xx:white:wps"; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ status-red { -+ label = "bcm53xx:red:status"; -+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ status-green { -+ label = "bcm53xx:green:status"; -+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ status-blue { -+ label = "bcm53xx:blue:status"; -+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan-white { -+ label = "bcm53xx:white:wan"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan-red { -+ label = "bcm53xx:red:wan"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch b/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch deleted file mode 100644 index 77ae2f7056..0000000000 --- a/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch +++ /dev/null @@ -1,112 +0,0 @@ -From b5f350c790ae6aaf3dda5a825d7e3fdeed731164 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 28 Mar 2015 15:01:38 +0100 -Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC68U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 83 +++++++++++++++++++++++++++++ - 2 files changed, 84 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb. - dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ -+ bcm4708-asus-rt-ac68u.dtb \ - bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-luxul-xwc-1000.dtb \ - bcm4708-netgear-r6250.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -0,0 +1,83 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Asus RT-AC68U -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "asus,rt-ac68u", "brcm,bcm4708"; -+ model = "Asus RT-AC68U (BCM4708)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ usb2 { -+ label = "bcm53xx:blue:usb2"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power { -+ label = "bcm53xx:blue:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ logo { -+ label = "bcm53xx:white:logo"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:blue:usb3"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ brightness { -+ label = "Backlight"; -+ linux,code = <KEY_BRIGHTNESS_ZERO>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch b/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch deleted file mode 100644 index 58e33e0598..0000000000 --- a/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch +++ /dev/null @@ -1,125 +0,0 @@ -From 16dc3bac722252a10e396546f44135ae1b6a7ff3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 31 Mar 2015 17:29:18 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC56U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 96 +++++++++++++++++++++++++++++ - 2 files changed, 97 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb. - dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ -+ bcm4708-asus-rt-ac56u.dtb \ - bcm4708-asus-rt-ac68u.dtb \ - bcm4708-buffalo-wzr-1750dhp.dtb \ - bcm4708-luxul-xwc-1000.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -0,0 +1,96 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Asus RT-AC56U -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "asus,rt-ac56u", "brcm,bcm4708"; -+ model = "Asus RT-AC56U (BCM4708)"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ usb3 { -+ label = "bcm53xx:blue:usb3"; -+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wan { -+ label = "bcm53xx:blue:wan"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ lan { -+ label = "bcm53xx:blue:lan"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power { -+ label = "bcm53xx:blue:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ all { -+ label = "bcm53xx:blue:all"; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:blue:2ghz"; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ -+ usb2 { -+ label = "bcm53xx:blue:usb2"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch b/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch deleted file mode 100644 index 8716a0d5c6..0000000000 --- a/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 7eb68a2a0519a77b93184c695d4d293c92dc2286 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 11 Feb 2015 16:40:58 +0100 -Subject: [PATCH] ARM: BCM5301X: Ignore another (BCM4709 specific) fault code -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Broadcom ARM devices seem to generate some fault once per boot. We -already have an ignoring handler for BCM4707/BCM4708, but BCM4709 -generates different code. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/mach-bcm/bcm_5301x.c | 9 +++++---- - 1 file changed, 5 insertions(+), 4 deletions(-) - ---- a/arch/arm/mach-bcm/bcm_5301x.c -+++ b/arch/arm/mach-bcm/bcm_5301x.c -@@ -18,15 +18,16 @@ static bool first_fault = true; - static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) - { -- if (fsr == 0x1c06 && first_fault) { -+ if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) { - first_fault = false; - - /* -- * These faults with code 0x1c06 happens for no good reason, -- * possibly left over from the CFE boot loader. -+ * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens -+ * for no good reason, possibly left over from the CFE boot -+ * loader. - */ - pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", -- addr, fsr); -+ addr, fsr); - - /* Returning non-zero causes fault display and panic */ - return 0; diff --git a/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch b/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch deleted file mode 100644 index aa99f3758c..0000000000 --- a/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch +++ /dev/null @@ -1,210 +0,0 @@ -From 9faa5960eef3204cae6637b530f5e23e53b5a9ef Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Fri, 29 May 2015 23:39:47 +0200 -Subject: [PATCH] ARM: BCM5301X: add NAND flash chip description - -This adds the NAND flash chip description for a standard chip found -connected to this SoC. This makes use of generic Broadcom NAND driver -with the iProc interface. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 1 + - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 1 + - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 1 + - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 9 +++----- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 1 + - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 1 + - arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 1 + - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 1 + - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 1 + - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 1 + - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 1 + - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 1 + - arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 24 ++++++++++++++++++++++ - arch/arm/boot/dts/bcm5301x.dtsi | 12 +++++++++++ - 14 files changed, 50 insertions(+), 6 deletions(-) - create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "asus,rt-ac56u", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "asus,rt-ac68u", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "luxul,xwc-1000", "brcm,bcm4708"; -@@ -23,12 +24,8 @@ - reg = <0x00000000 0x08000000>; - }; - -- axi@18000000 { -- nand@28000 { -- reg = <0x00028000 0x1000>; -- #address-cells = <1>; -- #size-cells = <1>; -- -+ nand: nand@18028000 { -+ nandcs@0 { - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "netgear,r6250v1", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "netgear,r6300v2", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "smartrg,sr400ac", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm47081.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm47081.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm47081.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708"; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -10,6 +10,7 @@ - /dts-v1/; - - #include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" - - / { - compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; ---- /dev/null -+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi -@@ -0,0 +1,24 @@ -+/* -+ * Broadcom BCM470X / BCM5301X Nand chip defaults. -+ * -+ * This should be included if the NAND controller is on chip select 0 -+ * and uses 8 bit ECC. -+ * -+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/ { -+ nand@18028000 { -+ nandcs@0 { -+ compatible = "brcm,nandcs"; -+ reg = <0>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ nand-ecc-strength = <8>; -+ nand-ecc-step-size = <512>; -+ }; -+ }; -+}; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -143,4 +143,16 @@ - #gpio-cells = <2>; - }; - }; -+ -+ nand: nand@18028000 { -+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; -+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; -+ reg-names = "nand", "iproc-idm", "iproc-ext"; -+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ brcm,nand-has-wp; -+ }; - }; diff --git a/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch b/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch deleted file mode 100644 index 142211520e..0000000000 --- a/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 1f80de6863ca0e36cabc622e858168fe5beb1e92 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 24 May 2015 21:08:14 +0200 -Subject: [PATCH] ARM: BCM5301X: add IRQ numbers for PCIe controller - -The driver for the PCIe controller was just added, this adds the -missing definition of the IRQ numbers to device tree. The driver itself -will be automatically detected by bcma. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -108,6 +108,30 @@ - /* ChipCommon */ - <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - -+ /* PCIe Controller 0 */ -+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 1 */ -+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 2 */ -+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, -+ - /* USB 2.0 Controller */ - <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, - diff --git a/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch deleted file mode 100644 index 463e42df56..0000000000 --- a/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 26343bdacfcdbf6ee3303d6078a015b908f90193 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 16 May 2015 16:55:39 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC87U -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 65 +++++++++++++++++++++++++++++ - 2 files changed, 66 insertions(+) - create mode 100644 arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47081-asus-rt-n18u.dtb \ - bcm47081-buffalo-wzr-600dhp2.dtb \ - bcm47081-buffalo-wzr-900dhp.dtb \ -+ bcm4709-asus-rt-ac87u.dtb \ - bcm4709-buffalo-wxr-1900dhp.dtb \ - bcm4709-netgear-r8000.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -0,0 +1,65 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Asus RT-AC87U -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+ -+/ { -+ compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Asus RT-AC87U"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ wps { -+ label = "bcm53xx:blue:wps"; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ power { -+ label = "bcm53xx:blue:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ wan { -+ label = "bcm53xx:red:wan"; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch b/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch deleted file mode 100644 index ce69cca473..0000000000 --- a/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch +++ /dev/null @@ -1,83 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 29 Jun 2015 07:22:16 +0200 -Subject: [PATCH] ARM: BCM5301X: Enable UART0 on tested devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There are two possible UARTs so we have (both of) them disabled by -default. Override uart0 status on devices that were verified to use it. -In case of Netgear R6250 also drop an old (and invalid) overwrite. It -doesn't have uart1 connected. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Acked-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -135,3 +135,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -55,3 +55,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -24,16 +24,6 @@ - reg = <0x00000000 0x08000000>; - }; - -- chipcommonA { -- uart0: serial@0300 { -- status = "okay"; -- }; -- -- uart1: serial@0400 { -- status = "okay"; -- }; -- }; -- - leds { - compatible = "gpio-leds"; - -@@ -92,3 +82,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -118,3 +118,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -122,3 +122,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch b/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch deleted file mode 100644 index afd1ce6959..0000000000 --- a/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch +++ /dev/null @@ -1,25 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Date: Wed, 29 Jul 2015 23:51:00 +0200 -Subject: [PATCH] ARM: BCM5301X: Add profiling support - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> -Signed-off-by: Olof Johansson <olof@lixom.net> ---- ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -82,6 +82,13 @@ - }; - }; - -+ pmu { -+ compatible = "arm,cortex-a9-pmu"; -+ interrupts = -+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; -+ }; -+ - clocks { - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch b/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch deleted file mode 100644 index 22688716a0..0000000000 --- a/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch +++ /dev/null @@ -1,128 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 26 Aug 2015 16:11:38 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7000 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -67,6 +67,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm47081-buffalo-wzr-900dhp.dtb \ - bcm4709-asus-rt-ac87u.dtb \ - bcm4709-buffalo-wxr-1900dhp.dtb \ -+ bcm4709-netgear-r7000.dtb \ - bcm4709-netgear-r8000.dtb - dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb - dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -0,0 +1,106 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * DTS for Netgear R7000 -+ * -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+/dts-v1/; -+ -+#include "bcm4708.dtsi" -+#include "bcm5301x-nand-cs0-bch8.dtsi" -+ -+/ { -+ compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708"; -+ model = "Netgear R7000"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ }; -+ -+ memory { -+ reg = <0x00000000 0x08000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ power-white { -+ label = "bcm53xx:white:power"; -+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; -+ }; -+ -+ power-amber { -+ label = "bcm53xx:amber:power"; -+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 5ghz { -+ label = "bcm53xx:white:5ghz"; -+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ 2ghz { -+ label = "bcm53xx:white:2ghz"; -+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wps { -+ label = "bcm53xx:white:wps"; -+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ wireless { -+ label = "bcm53xx:white:wireless"; -+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb3 { -+ label = "bcm53xx:white:usb3"; -+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ -+ usb2 { -+ label = "bcm53xx:white:usb2"; -+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-off"; -+ }; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ wps { -+ label = "WPS"; -+ linux,code = <KEY_WPS_BUTTON>; -+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ rfkill { -+ label = "WiFi"; -+ linux,code = <KEY_RFKILL>; -+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; -+ }; -+ -+ restart { -+ label = "Reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; diff --git a/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch b/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch deleted file mode 100644 index 76123e972a..0000000000 --- a/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 823769d2e6622a48276bee35b2dad5ba77cbdc25 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 25 Jan 2015 11:40:57 +0100 -Subject: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Just like in case of other watchdog drivers, use the new kernel core -API to provide restart support. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Reviewed-by: Guenter Roeck <linux@roeck-us.net> -Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- - drivers/watchdog/bcm47xx_wdt.c | 21 ++++++++++++++++++++- - include/linux/bcm47xx_wdt.h | 1 + - 2 files changed, 21 insertions(+), 1 deletion(-) - ---- a/drivers/watchdog/bcm47xx_wdt.c -+++ b/drivers/watchdog/bcm47xx_wdt.c -@@ -169,6 +169,17 @@ static int bcm47xx_wdt_notify_sys(struct - return NOTIFY_DONE; - } - -+static int bcm47xx_wdt_restart(struct notifier_block *this, unsigned long mode, -+ void *cmd) -+{ -+ struct bcm47xx_wdt *wdt; -+ -+ wdt = container_of(this, struct bcm47xx_wdt, restart_handler); -+ wdt->timer_set(wdt, 1); -+ -+ return NOTIFY_DONE; -+} -+ - static struct watchdog_ops bcm47xx_wdt_soft_ops = { - .owner = THIS_MODULE, - .start = bcm47xx_wdt_soft_start, -@@ -209,15 +220,23 @@ static int bcm47xx_wdt_probe(struct plat - if (ret) - goto err_timer; - -- ret = watchdog_register_device(&wdt->wdd); -+ wdt->restart_handler.notifier_call = &bcm47xx_wdt_restart; -+ wdt->restart_handler.priority = 64; -+ ret = register_restart_handler(&wdt->restart_handler); - if (ret) - goto err_notifier; - -+ ret = watchdog_register_device(&wdt->wdd); -+ if (ret) -+ goto err_handler; -+ - dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n", - timeout, nowayout ? ", nowayout" : "", - soft ? ", Software Timer" : ""); - return 0; - -+err_handler: -+ unregister_restart_handler(&wdt->restart_handler); - err_notifier: - unregister_reboot_notifier(&wdt->notifier); - err_timer: ---- a/include/linux/bcm47xx_wdt.h -+++ b/include/linux/bcm47xx_wdt.h -@@ -16,6 +16,7 @@ struct bcm47xx_wdt { - - struct watchdog_device wdd; - struct notifier_block notifier; -+ struct notifier_block restart_handler; - - struct timer_list soft_timer; - atomic_t soft_ticks; diff --git a/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch b/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch deleted file mode 100644 index 65a876d864..0000000000 --- a/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b08c144e3a1089cdb725e393fa4f68f83a73e31b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sat, 7 Feb 2015 18:04:10 +0100 -Subject: [PATCH] watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same -SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> -Reviewed-by: Guenter Roeck <linux@roeck-us.net> -Signed-off-by: Wim Van Sebroeck <wim@iguana.be> ---- - drivers/watchdog/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1101,7 +1101,7 @@ config ATH79_WDT - - config BCM47XX_WDT - tristate "Broadcom BCM47xx Watchdog Timer" -- depends on BCM47XX -+ depends on BCM47XX || ARCH_BCM_5301X - select WATCHDOG_CORE - help - Hardware driver for the Broadcom BCM47xx Watchdog Timer. diff --git a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch b/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch deleted file mode 100644 index dbff6cc1d3..0000000000 --- a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 0509f6dcc46d10ea4bb8c70494dc7ae11bcb3f01 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 10 Dec 2014 21:14:10 +0100 -Subject: [PATCH] firmware: backport NVRAM driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/Kconfig | 2 ++ - drivers/firmware/Kconfig | 1 + - drivers/firmware/Makefile | 1 + - drivers/net/ethernet/broadcom/b44.c | 2 +- - drivers/net/ethernet/broadcom/bgmac.c | 2 +- - drivers/ssb/driver_chipcommon_pmu.c | 2 +- - 6 files changed, 7 insertions(+), 3 deletions(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -2166,6 +2166,8 @@ source "net/Kconfig" - - source "drivers/Kconfig" - -+source "drivers/firmware/Kconfig" -+ - source "fs/Kconfig" - - source "arch/arm/Kconfig.debug" ---- a/drivers/firmware/Kconfig -+++ b/drivers/firmware/Kconfig -@@ -132,6 +132,7 @@ config ISCSI_IBFT - detect iSCSI boot parameters dynamically during system boot, say Y. - Otherwise, say N. - -+source "drivers/firmware/broadcom/Kconfig" - source "drivers/firmware/google/Kconfig" - source "drivers/firmware/efi/Kconfig" - ---- a/drivers/firmware/Makefile -+++ b/drivers/firmware/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_i - obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o - obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o - -+obj-y += broadcom/ - obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ - obj-$(CONFIG_EFI) += efi/ - obj-$(CONFIG_UEFI_CPER) += efi/ ---- a/drivers/net/ethernet/broadcom/b44.c -+++ b/drivers/net/ethernet/broadcom/b44.c -@@ -400,7 +400,7 @@ static void b44_set_flow_ctrl(struct b44 - } - - #ifdef CONFIG_BCM47XX --#include <bcm47xx_nvram.h> -+#include <linux/bcm47xx_nvram.h> - static void b44_wap54g10_workaround(struct b44 *bp) - { - char buf[20]; ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -18,7 +18,7 @@ - #include <linux/interrupt.h> - #include <linux/dma-mapping.h> - #include <linux/platform_data/b53.h> --#include <bcm47xx_nvram.h> -+#include <linux/bcm47xx_nvram.h> - - static const struct bcma_device_id bgmac_bcma_tbl[] = { - BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), ---- a/drivers/ssb/driver_chipcommon_pmu.c -+++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -14,7 +14,7 @@ - #include <linux/delay.h> - #include <linux/export.h> - #ifdef CONFIG_BCM47XX --#include <bcm47xx_nvram.h> -+#include <linux/bcm47xx_nvram.h> - #endif - - #include "ssb_private.h" diff --git a/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch deleted file mode 100644 index b914fd995f..0000000000 --- a/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sun, 4 May 2014 13:19:20 +0200 -Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver - -This driver needs an nvram driver and fetches the sprom values from the -nvram and provides it to any other driver. The calibration data for the -wifi chip the mac address and some more board description data is -stores in the sprom. - -This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to -make the bcm47xx MIPS SoCs also use this driver some time later. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - .../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 + - drivers/misc/Kconfig | 11 + - drivers/misc/Makefile | 1 + - drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++ - 4 files changed, 718 insertions(+) - create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt - create mode 100644 drivers/misc/bcm47xx-sprom.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt -@@ -0,0 +1,16 @@ -+Broadcom bcm47xx/bcm53xx sprom converter -+ -+This driver provbides an sprom based on a given nvram. -+ -+Required properties: -+ -+- compatible : brcm,bcm47xx-sprom -+ -+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram -+ -+Example: -+ -+sprom0: sprom@0 { -+ compatible = "brcm,bcm47xx-sprom"; -+ nvram = <&nvram0>; -+}; ---- a/drivers/misc/Kconfig -+++ b/drivers/misc/Kconfig -@@ -515,6 +515,17 @@ config VEXPRESS_SYSCFG - bus. System Configuration interface is one of the possible means - of generating transactions on this bus. - -+config BCM47XX_SPROM -+ tristate "BCM47XX sprom driver" -+ help -+ This driver parses the sprom from a given nvram which is found on -+ Broadcom bcm47xx and bcm53xx SoCs. -+ -+ The sprom contains board configuration data like the -+ calibration data fro the wifi chips, the mac addresses used -+ by the board and many other board configuration data. This -+ driver will provide the sprom to bcma. -+ - source "drivers/misc/c2port/Kconfig" - source "drivers/misc/eeprom/Kconfig" - source "drivers/misc/cb710/Kconfig" ---- a/drivers/misc/Makefile -+++ b/drivers/misc/Makefile -@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/ - obj-$(CONFIG_ECHO) += echo/ - obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o - obj-$(CONFIG_CXL_BASE) += cxl/ -+obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx-sprom.o diff --git a/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch b/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch deleted file mode 100644 index db855c9d11..0000000000 --- a/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch +++ /dev/null @@ -1,314 +0,0 @@ -From 707ab07695ea8953a5bb56512e7bb38ca79c5c38 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 19 Feb 2015 23:27:59 +0100 -Subject: [PATCH V2] ARM: BCM5301X: Implement SMP support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- -V2: Change code after receiving Florian's comments: - 1) Use "mmio-sram" - 2) Remove commented out ASM call - 3) Fix coding style in ASM - 4) Simplify finding OF node ---- - Documentation/devicetree/bindings/arm/bcm4708.txt | 24 ++++ - Documentation/devicetree/bindings/arm/cpus.txt | 1 + - arch/arm/boot/dts/bcm4708.dtsi | 13 ++ - arch/arm/mach-bcm/Makefile | 3 + - arch/arm/mach-bcm/bcm5301x_headsmp.S | 45 ++++++ - arch/arm/mach-bcm/bcm5301x_smp.c | 158 ++++++++++++++++++++++ - 6 files changed, 244 insertions(+) - create mode 100644 arch/arm/mach-bcm/bcm5301x_headsmp.S - create mode 100644 arch/arm/mach-bcm/bcm5301x_smp.c - ---- a/Documentation/devicetree/bindings/arm/bcm4708.txt -+++ b/Documentation/devicetree/bindings/arm/bcm4708.txt -@@ -6,3 +6,27 @@ Boards with the BCM4708 SoC shall have t - Required root node property: - - compatible = "brcm,bcm4708"; -+ -+Optional sub-node properties: -+ -+compatible = "mmio-sram" for SRAM access with IO memory region -+ This is needed for SMP-capable SoCs which use part of -+ SRAM for storing location of code to be executed by the -+ extra cores. -+ SMP support requires another sub-node with compatible -+ property "brcm,bcm4708-sysram". -+ -+Example: -+ -+ sysram@ffff0000 { -+ compatible = "mmio-sram"; -+ reg = <0xffff0000 0x10000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0xffff0000 0x10000>; -+ -+ smp-sysram@0 { -+ compatible = "brcm,bcm4708-sysram"; -+ reg = <0x0 0x1000>; -+ }; -+ }; ---- a/Documentation/devicetree/bindings/arm/cpus.txt -+++ b/Documentation/devicetree/bindings/arm/cpus.txt -@@ -188,6 +188,7 @@ nodes to be present and contain the prop - can be one of: - "allwinner,sun6i-a31" - "arm,psci" -+ "brcm,bcm4708-smp" - "brcm,brahma-b15" - "marvell,armada-375-smp" - "marvell,armada-380-smp" ---- a/arch/arm/boot/dts/bcm4708.dtsi -+++ b/arch/arm/boot/dts/bcm4708.dtsi -@@ -15,6 +15,7 @@ - cpus { - #address-cells = <1>; - #size-cells = <0>; -+ enable-method = "brcm,bcm4708-smp"; - - cpu@0 { - device_type = "cpu"; -@@ -31,4 +32,16 @@ - }; - }; - -+ sysram@ffff0000 { -+ compatible = "mmio-sram"; -+ reg = <0xffff0000 0x10000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0xffff0000 0x10000>; -+ -+ smp-sysram@0 { -+ compatible = "brcm,bcm4708-sysram"; -+ reg = <0x0 0x1000>; -+ }; -+ }; - }; ---- a/arch/arm/mach-bcm/Makefile -+++ b/arch/arm/mach-bcm/Makefile -@@ -33,6 +33,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2 - - # BCM5301X - obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o -+ifeq ($(CONFIG_SMP),y) -+obj-$(CONFIG_ARCH_BCM_5301X) += bcm5301x_smp.o bcm5301x_headsmp.o -+endif - - # BCM63XXx - obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o ---- /dev/null -+++ b/arch/arm/mach-bcm/bcm5301x_headsmp.S -@@ -0,0 +1,45 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * -+ * Copyright (c) 2003 ARM Limited -+ * All Rights Reserved -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include <linux/linkage.h> -+ -+/* -+ * BCM5301X specific entry point for secondary CPUs. -+ */ -+ENTRY(bcm5301x_secondary_startup) -+ mrc p15, 0, r0, c0, c0, 5 -+ and r0, r0, #15 -+ adr r4, 1f -+ ldmia r4, {r5, r6} -+ sub r4, r4, r5 -+ add r6, r6, r4 -+pen: ldr r7, [r6] -+ cmp r7, r0 -+ bne pen -+ -+ /* -+ * In case L1 cache has unpredictable contents at power-up -+ * clean its contents without flushing. -+ */ -+ bl v7_invalidate_l1 -+ -+ mov r0, #0 -+ mcr p15, 0, r0, c7, c5, 0 /* Invalidate icache */ -+ dsb -+ isb -+ -+ /* -+ * we've been released from the holding pen: secondary_stack -+ * should now contain the SVC stack for this core -+ */ -+ b secondary_startup -+ENDPROC(bcm5301x_secondary_startup) -+ -+ .align 2 -+1: .long . -+ .long pen_release ---- /dev/null -+++ b/arch/arm/mach-bcm/bcm5301x_smp.c -@@ -0,0 +1,158 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * -+ * Copyright (C) 2002 ARM Ltd. -+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include <asm/cacheflush.h> -+#include <asm/delay.h> -+#include <asm/smp_plat.h> -+#include <asm/smp_scu.h> -+ -+#include <linux/clockchips.h> -+#include <linux/of.h> -+#include <linux/of_address.h> -+ -+#define SOC_ROM_LUT_OFF 0x400 -+ -+extern void bcm5301x_secondary_startup(void); -+ -+static void __cpuinit write_pen_release(int val) -+{ -+ pen_release = val; -+ smp_wmb(); -+ sync_cache_w(&pen_release); -+} -+ -+static DEFINE_SPINLOCK(boot_lock); -+ -+static void __init bcm5301x_smp_secondary_set_entry(void (*entry_point)(void)) -+{ -+ void __iomem *sysram_base_addr = NULL; -+ struct device_node *node; -+ -+ node = of_find_compatible_node(NULL, NULL, "brcm,bcm4708-sysram"); -+ if (!of_device_is_available(node)) -+ return; -+ -+ sysram_base_addr = of_iomap(node, 0); -+ if (!sysram_base_addr) { -+ pr_warn("Failed to map sysram\n"); -+ return; -+ } -+ -+ writel(virt_to_phys(entry_point), sysram_base_addr + SOC_ROM_LUT_OFF); -+ -+ dsb_sev(); /* Exit WFI */ -+ mb(); /* make sure write buffer is drained */ -+ -+ iounmap(sysram_base_addr); -+} -+ -+static void __init bcm5301x_smp_prepare_cpus(unsigned int max_cpus) -+{ -+ void __iomem *scu_base; -+ -+ if (!scu_a9_has_base()) { -+ pr_warn("Unknown SCU base\n"); -+ return; -+ } -+ -+ scu_base = ioremap((phys_addr_t)scu_a9_get_base(), SZ_256); -+ if (!scu_base) { -+ pr_err("Failed to remap SCU\n"); -+ return; -+ } -+ -+ /* Initialise the SCU */ -+ scu_enable(scu_base); -+ -+ /* Let CPUs know where to start */ -+ bcm5301x_smp_secondary_set_entry(bcm5301x_secondary_startup); -+ -+ iounmap(scu_base); -+} -+ -+static void __cpuinit bcm5301x_smp_secondary_init(unsigned int cpu) -+{ -+ trace_hardirqs_off(); -+ -+ /* -+ * let the primary processor know we're out of the -+ * pen, then head off into the C entry point -+ */ -+ write_pen_release(-1); -+ -+ /* -+ * Synchronise with the boot thread. -+ */ -+ spin_lock(&boot_lock); -+ spin_unlock(&boot_lock); -+} -+ -+static int __cpuinit bcm5301x_smp_boot_secondary(unsigned int cpu, -+ struct task_struct *idle) -+{ -+ unsigned long timeout; -+ -+ /* -+ * set synchronisation state between this boot processor -+ * and the secondary one -+ */ -+ spin_lock(&boot_lock); -+ -+ /* -+ * The secondary processor is waiting to be released from -+ * the holding pen - release it, then wait for it to flag -+ * that it has been released by resetting pen_release. -+ * -+ * Note that "pen_release" is the hardware CPU ID, whereas -+ * "cpu" is Linux's internal ID. -+ */ -+ write_pen_release(cpu_logical_map(cpu)); -+ -+ /* Send the secondary CPU SEV */ -+ dsb_sev(); -+ -+ udelay(100); -+ -+ /* -+ * Send the secondary CPU a soft interrupt, thereby causing -+ * the boot monitor to read the system wide flags register, -+ * and branch to the address found there. -+ */ -+ arch_send_wakeup_ipi_mask(cpumask_of(cpu)); -+ -+ /* -+ * Timeout set on purpose in jiffies so that on slow processors -+ * that must also have low HZ it will wait longer. -+ */ -+ timeout = jiffies + (HZ * 10); -+ while (time_before(jiffies, timeout)) { -+ smp_rmb(); -+ if (pen_release == -1) -+ break; -+ -+ udelay(10); -+ } -+ -+ /* -+ * now the secondary core is starting up let it run its -+ * calibrations, then wait for it to finish -+ */ -+ spin_unlock(&boot_lock); -+ -+ return pen_release != -1 ? -ENOSYS : 0; -+} -+ -+static struct smp_operations bcm5301x_smp_ops __initdata = { -+ .smp_prepare_cpus = bcm5301x_smp_prepare_cpus, -+ .smp_secondary_init = bcm5301x_smp_secondary_init, -+ .smp_boot_secondary = bcm5301x_smp_boot_secondary, -+}; -+ -+CPU_METHOD_OF_DECLARE(bcm5301x_smp, "brcm,bcm4708-smp", -+ &bcm5301x_smp_ops); diff --git a/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch b/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch deleted file mode 100644 index 2964a26faa..0000000000 --- a/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch +++ /dev/null @@ -1,29 +0,0 @@ -From cf72936c001056de1cfcb27dd9a232f5484ec59c Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 29 May 2014 20:54:15 +0200 -Subject: [PATCH 12/17] pci: do not probe too early - -Probing is done before the PCIe bridge is fully activated and the -address spaces does not get assigned to the PCIe devices. Without the -address space the driver can not register to this device. With this -patch the driver reregistration is done later. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/pci/probe.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/drivers/pci/probe.c -+++ b/drivers/pci/probe.c -@@ -2100,7 +2100,10 @@ struct pci_bus *pci_scan_root_bus(struct - if (!found) - pci_bus_update_busn_res_end(b, max); - -- pci_bus_add_devices(b); -+ /* this should be done in arch/arm/kernel/bios32.c, because the -+ resources for the PCI devices are initilized later and doing -+ it here will fail. */ -+ /* pci_bus_add_devices(b); */ - return b; - } - EXPORT_SYMBOL(pci_scan_root_bus); diff --git a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch deleted file mode 100644 index 9c8aa3bd0e..0000000000 --- a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch +++ /dev/null @@ -1,535 +0,0 @@ -From cf067bf8bb993d6cfdc42d750ae241c43f88403f Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Mon, 12 May 2014 11:55:20 +0200 -Subject: [PATCH 1/2] PCI: BCM5301X: add PCIe2 driver for BCM5301X SoCs - -This driver supports the PCIe controller found on the BCM4708 and -similar SoCs. The controller itself is automatically detected by bcma. - -This controller is found on SoCs usually used in SOHO routers to -connect the wifi cards to the SoC. All the of the BCM5301X SoCs I know -of have 2 or 3 of these controllers in the SoC. - -I had to use PCI domains otherwise the pci_create_root_bus() function -in drivers/pci/probe.c would fail for the second controller being -registered because pci_find_bus() would find the same PCIe bus again -and assume it is already registered, which ends up in a kernel panic in -pcibios_init_hw() in arch/arm/kernel/bios32.c - -The ARM PCI code assumes that every controller has an I/O space and -adds a dummy area if the driver does not specify one. This will work -for the first controller, but when we register the second one this will -result in an error. To prevent this problem we add an empty I/O space. - -Currently I have problems with probing the devices on the bus, because -pci_bus_add_devices() is called too early in pci_scan_root_bus() in -drivers/pci/probe.c, before pci_bus_assign_resources() was called in -pci_common_init_dev() in arch/arm/kernel/bios32.c. When the devices are -added too early they do not have any resources and adding fails. I have -to remove the call to pci_bus_add_devices() in pci_scan_root_bus() to -make registration work, calling pci_bus_add_devices() later again does -not fix this problem. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/mach-bcm/Kconfig | 1 + - drivers/pci/host/Kconfig | 7 + - drivers/pci/host/Makefile | 1 + - drivers/pci/host/pci-host-bcm5301x.c | 428 +++++++++++++++++++++++++++++++++++ - 4 files changed, 437 insertions(+) - create mode 100644 drivers/pci/host/pci-host-bcm5301x.c - ---- a/arch/arm/mach-bcm/Kconfig -+++ b/arch/arm/mach-bcm/Kconfig -@@ -86,6 +86,7 @@ config ARCH_BCM_5301X - select HAVE_ARM_TWD if SMP - select ARM_GLOBAL_TIMER - select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK -+ select PCI_DOMAINS if PCI - help - Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. - ---- a/drivers/pci/host/Kconfig -+++ b/drivers/pci/host/Kconfig -@@ -91,4 +91,11 @@ config PCI_XGENE - There are 5 internal PCIe ports available. Each port is GEN3 capable - and have varied lanes from x1 to x8. - -+config PCI_BCM5301X -+ bool "BCM5301X PCIe2 host controller" -+ depends on BCMA && OF && ARM && PCI_DOMAINS -+ help -+ Say Y here if you want to support the PCIe host controller found -+ on Broadcom BCM5301X and BCM470X (Northstar) SoCs. -+ - endmenu ---- a/drivers/pci/host/Makefile -+++ b/drivers/pci/host/Makefile -@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe - obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o - obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o - obj-$(CONFIG_PCI_XGENE) += pci-xgene.o -+obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o ---- /dev/null -+++ b/drivers/pci/host/pci-host-bcm5301x.c -@@ -0,0 +1,460 @@ -+/* -+ * Northstar PCI-Express driver -+ * Only supports Root-Complex (RC) mode -+ * -+ * Notes: -+ * PCI Domains are being used to identify the PCIe port 1:1. -+ * -+ * Only MEM access is supported, PAX does not support IO. -+ * -+ * Copyright 2012-2014, Broadcom Corporation -+ * Copyright 2014, Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/pci.h> -+#include <linux/io.h> -+#include <linux/ioport.h> -+#include <linux/bcma/bcma.h> -+#include <linux/bcma/bcma_driver_pcie2.h> -+ -+#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */ -+ -+#define PCI_LINK_STATUS_CTRL_2_OFFSET 0xDC -+#define PCI_TARGET_LINK_SPEED_MASK 0xF -+#define PCI_TARGET_LINK_SPEED_GEN2 0x2 -+#define PCI_TARGET_LINK_SPEED_GEN1 0x1 -+ -+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin) -+{ -+ struct pci_sys_data *sys = pdev->sysdata; -+ struct bcma_device *bdev = sys->private_data; -+ -+ return bcma_core_irq(bdev, 5); -+} -+ -+static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno, -+ unsigned int devfn, int where) -+{ -+ int slot = PCI_SLOT(devfn); -+ int fn = PCI_FUNC(devfn); -+ u32 addr_reg; -+ -+ if (busno == 0) { -+ if (slot >= 1) -+ return 0; -+ bcma_write32(bdev, BCMA_CORE_PCIE2_CONFIGINDADDR, -+ where & 0xffc); -+ return BCMA_CORE_PCIE2_CONFIGINDDATA; -+ } -+ if (fn > 1) -+ return 0; -+ addr_reg = (busno & 0xff) << 20 | (slot << 15) | (fn << 12) | -+ (where & 0xffc) | (1 & 0x3); -+ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_CFG_ADDR, addr_reg); -+ return BCMA_CORE_PCIE2_CFG_DATA; -+} -+ -+static u32 bcma_pcie2_read_config(struct bcma_device *bdev, int busno, -+ unsigned int devfn, int where, int size) -+{ -+ u32 base; -+ u32 data_reg; -+ u32 mask; -+ int shift; -+ -+ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where); -+ -+ if (!base) -+ return ~0UL; -+ -+ data_reg = bcma_read32(bdev, base); -+ -+ if (size == 4) -+ return data_reg; -+ -+ mask = (1 << (size * 8)) - 1; -+ shift = (where % 4) * 8; -+ return (data_reg >> shift) & mask; -+} -+ -+static void bcma_pcie2_write_config(struct bcma_device *bdev, int busno, -+ unsigned int devfn, int where, int size, -+ u32 val) -+{ -+ u32 base; -+ u32 data_reg; -+ -+ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where); -+ -+ if (!base) -+ return; -+ -+ if (size < 4) { -+ u32 mask = (1 << (size * 8)) - 1; -+ int shift = (where % 4) * 8; -+ -+ data_reg = bcma_read32(bdev, base); -+ data_reg &= ~(mask << shift); -+ data_reg |= (val & mask) << shift; -+ } else { -+ data_reg = val; -+ } -+ -+ bcma_write32(bdev, base, data_reg); -+} -+ -+static int bcma_pcie2_read_config_pci(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 *val) -+{ -+ struct pci_sys_data *sys = bus->sysdata; -+ struct bcma_device *bdev = sys->private_data; -+ -+ *val = bcma_pcie2_read_config(bdev, bus->number, devfn, where, size); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcma_pcie2_write_config_pci(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ struct pci_sys_data *sys = bus->sysdata; -+ struct bcma_device *bdev = sys->private_data; -+ -+ bcma_pcie2_write_config(bdev, bus->number, devfn, where, size, val); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+/* -+ * Methods for accessing configuration registers -+ */ -+static struct pci_ops bcma_pcie2_ops = { -+ .read = bcma_pcie2_read_config_pci, -+ .write = bcma_pcie2_write_config_pci, -+}; -+ -+/* NS: CLASS field is R/O, and set to wrong 0x200 value */ -+static void bcma_pcie2_fixup_class(struct pci_dev *dev) -+{ -+ dev->class = PCI_CLASS_BRIDGE_PCI << 8; -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8011, bcma_pcie2_fixup_class); -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8012, bcma_pcie2_fixup_class); -+ -+/* -+ * Check link status, return 0 if link is up in RC mode, -+ * otherwise return non-zero -+ */ -+static int bcma_pcie2_check_link(struct bcma_device *bdev, struct pci_sys_data *sys) -+{ -+ u32 tmp32; -+ u16 tmp16; -+ u16 pos; -+ u8 nlw; -+ /* -+ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before -+ * creating bus root, so we don't have it here yet. On the other hand -+ * we really want to use pci_bus_find_capability helper to check NLW. -+ * Let's fake simple pci_bus just to query for capabilities. -+ */ -+ struct pci_bus bus = { -+ .number = 0, -+ .ops = &bcma_pcie2_ops, -+ .sysdata = sys, -+ }; -+ -+ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_LINK_STATUS); -+ dev_dbg(&bdev->dev, "link status: 0x%08x\n", tmp32); -+ -+ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_STRAP_STATUS); -+ dev_dbg(&bdev->dev, "strap status: 0x%08x\n", tmp32); -+ -+ /* check link status to see if link is active */ -+ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP); -+ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, &tmp16); -+ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; -+ -+ if (nlw == 0) { -+ /* try GEN 1 link speed */ -+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0, -+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4); -+ if ((tmp32 & PCI_TARGET_LINK_SPEED_MASK) == -+ PCI_TARGET_LINK_SPEED_GEN2) { -+ tmp32 &= ~PCI_TARGET_LINK_SPEED_MASK; -+ tmp32 |= PCI_TARGET_LINK_SPEED_GEN1; -+ bcma_pcie2_write_config(bdev, 0, 0, -+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4, tmp32); -+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0, -+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4); -+ msleep(100); -+ -+ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP); -+ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, -+ &tmp16); -+ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> -+ PCI_EXP_LNKSTA_NLW_SHIFT; -+ } -+ } -+ -+ dev_info(&bdev->dev, "link: %s\n", nlw ? "UP" : "DOWN"); -+ return nlw ? 0 : -ENODEV; -+} -+ -+/* -+ * Initializte the PCIe controller -+ */ -+static void bcma_pcie2_hw_init(struct bcma_device *bdev) -+{ -+ u32 tmp32; -+ u16 tmp16; -+ -+ /* Change MPS and MRRS to 512 */ -+ tmp16 = bcma_pcie2_read_config(bdev, 0, 0, 0x4d4, 2); -+ tmp16 &= ~7; -+ tmp16 |= 2; -+ bcma_pcie2_write_config(bdev, 0, 0, 0x4d4, 2, tmp16); -+ -+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0, 0xb4, 4); -+ tmp32 &= ~((7 << 12) | (7 << 5)); -+ tmp32 |= (2 << 12) | (2 << 5); -+ bcma_pcie2_write_config(bdev, 0, 0, 0xb4, 4, tmp32); -+ -+ /* -+ * Turn-on Root-Complex (RC) mode, from reset default of EP -+ * The mode is set by straps, can be overwritten via DMU -+ * register <cru_straps_control> bit 5, "1" means RC -+ */ -+ -+ /* Send a downstream reset */ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL, -+ PCIE2_CLKC_RST_OE | PCIE2_CLKC_RST); -+ usleep_range(250, 400); -+ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL, PCIE2_CLKC_RST_OE); -+ msleep(250); -+ -+ /* TBD: take care of PM, check we're on */ -+} -+ -+/* -+ * Setup the address translation -+ * -+ * NOTE: All PCI-to-CPU address mapping are 1:1 for simplicity -+ */ -+static int bcma_pcie2_map_init(struct bcma_device *bdev, u32 addr) -+{ -+ /* 64MB alignment */ -+ if (!addr || (addr & (SZ_64M - 1))) -+ return -EINVAL; -+ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP0_LOWER, addr); -+ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR0, addr | 0x01); -+ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP1_LOWER, addr + SZ_64M); -+ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR1, (addr + SZ_64M) | 0x01); -+ -+ /* -+ * Inbound address translation setup -+ * Northstar only maps up to 128 MiB inbound, DRAM could be up to 1 GiB. -+ * -+ * For now allow access to entire DRAM, assuming it is less than 128MiB, -+ * otherwise DMA bouncing mechanism may be required. -+ * Also consider DMA mask to limit DMA physical address -+ */ -+ /* 64-bit LE regs, write low word, high is 0 at reset */ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_FUNC0_IMAP1, PHYS_OFFSET | 0x1); -+ bcma_write32(bdev, BCMA_CORE_PCIE2_IARR1_LOWER, -+ PHYS_OFFSET | ((SZ_128M >> 20) & 0xff)); -+ return 0; -+} -+ -+/* -+ * Setup PCIE Host bridge -+ */ -+static int bcma_pcie2_bridge_init(struct bcma_device *bdev, u32 addr, u32 size) -+{ -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1, 0); -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1, 1); -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1, 4); -+ -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1); -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1); -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1); -+ -+ /* MEM_BASE, MEM_LIM require 1MB alignment */ -+ if (((addr >> 16) & 0xf) || (((addr + size) >> 16) & 0xf)) -+ return -EINVAL; -+ -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_BASE, 2, addr >> 16); -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2, -+ (addr + size) >> 16); -+ -+ /* These registers are not supported on the NS */ -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_BASE_UPPER16, 2, 0); -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_LIMIT_UPPER16, 2, 0); -+ -+ /* Force class to that of a Bridge */ -+ bcma_pcie2_write_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2, -+ PCI_CLASS_BRIDGE_PCI); -+ -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2); -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_BASE, 2); -+ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2); -+ return 0; -+} -+ -+static void bcma_pcie2_3rd_init(struct bcma_bus *bus) -+{ -+ /* PCIE PLL block register (base 0x8000) */ -+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x57fe8000); -+ /* Check PCIE PLL lock status */ -+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x67c60000); -+} -+ -+/* To improve PCIE phy jitter */ -+static void bcma_pcie2_improve_phy_jitter(struct bcma_bus *bus, int phyaddr) -+{ -+ u32 val; -+ -+ /* Change blkaddr */ -+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x1f << 18) | -+ (2 << 16) | (0x863 << 4); -+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); -+ -+ /* Write 0x0190 to 0x13 regaddr */ -+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x13 << 18) | -+ (2 << 16) | 0x0190; -+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); -+ -+ /* Write 0x0191 to 0x19 regaddr */ -+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x19 << 18) | -+ (2 << 16) | 0x0191; -+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val); -+} -+ -+static int bcma_pcie2_setup(int nr, struct pci_sys_data *sys) -+{ -+ struct bcma_device *bdev = sys->private_data; -+ struct bcma_bus *bus = bdev->bus; -+ struct resource *res; -+ struct bcma_device *arm_core; -+ u32 cru_straps_ctrl; -+ int ret; -+ int phyaddr; -+ -+ if (bdev->core_unit == 2) { -+ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9); -+ cru_straps_ctrl = bcma_read32(arm_core, 0x2a0); -+ -+ /* 3rd PCIE is not selected */ -+ if (cru_straps_ctrl & 0x10) -+ return -ENODEV; -+ -+ bcma_pcie2_3rd_init(bus); -+ phyaddr = 0xf; -+ } else { -+ phyaddr = bdev->core_unit; -+ } -+ bcma_pcie2_improve_phy_jitter(bus, phyaddr); -+ -+ /* create mem resource */ -+ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL); -+ if (!res) -+ return -EINVAL; -+ -+ res->start = bdev->addr_s[0]; -+ res->end = bdev->addr_s[0] + SZ_128M -1; -+ res->name = "PCIe dummy IO space"; -+ res->flags = IORESOURCE_MEM; -+ -+ pci_add_resource(&sys->resources, res); -+ -+ /* This PCIe controller does not support IO Mem, so use a dummy one. */ -+ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL); -+ if (!res) -+ return -EINVAL; -+ -+ res->start = 0; -+ res->end = 0; -+ res->name = "PCIe dummy IO space"; -+ res->flags = IORESOURCE_IO; -+ -+ pci_add_resource(&sys->resources, res); -+ -+ bcma_pcie2_hw_init(bdev); -+ ret = bcma_pcie2_map_init(bdev, bdev->addr_s[0]); -+ if (ret) -+ return ret; -+ -+ /* -+ * Skip inactive ports - -+ * will need to change this for hot-plugging -+ */ -+ ret = bcma_pcie2_check_link(bdev, sys); -+ if (ret) -+ return ret; -+ -+ ret = bcma_pcie2_bridge_init(bdev, bdev->addr_s[0], SZ_128M); -+ if (ret) -+ return ret; -+ -+ return 1; -+} -+ -+static int bcma_pcie2_probe(struct bcma_device *bdev) -+{ -+ struct hw_pci hw = { -+ .nr_controllers = 1, -+ .domain = bdev->core_unit, -+ .private_data = (void **)&bdev, -+ .setup = bcma_pcie2_setup, -+ .map_irq = bcma_pcie2_map_irq, -+ .ops = &bcma_pcie2_ops, -+ }; -+ -+ dev_info(&bdev->dev, "initializing PCIe controller\n"); -+ -+ /* Announce this port to ARM/PCI common code */ -+ pci_common_init_dev(&bdev->dev, &hw); -+ -+ /* Setup virtual-wire interrupts */ -+ bcma_write32(bdev, BCMA_CORE_PCIE2_SYS_RC_INTX_EN, 0xf); -+ -+ /* Enable memory and bus master */ -+ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6); -+ -+ return 0; -+} -+ -+static const struct bcma_device_id bcma_pcie2_table[] = { -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_PCIEG2, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORETABLE_END -+}; -+MODULE_DEVICE_TABLE(bcma, bcma_pcie2_table); -+ -+static struct bcma_driver bcma_pcie2_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = bcma_pcie2_table, -+ .probe = bcma_pcie2_probe, -+}; -+ -+static int __init bcma_pcie2_init(void) -+{ -+ return bcma_driver_register(&bcma_pcie2_driver); -+} -+module_init(bcma_pcie2_init); -+ -+static void __exit bcma_pcie2_exit(void) -+{ -+ bcma_driver_unregister(&bcma_pcie2_driver); -+} -+module_exit(bcma_pcie2_exit); -+ -+MODULE_AUTHOR("Hauke Mehrtens"); -+MODULE_DESCRIPTION("BCM5301X PCIe host controller"); -+MODULE_LICENSE("GPLv2"); diff --git a/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch b/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch deleted file mode 100644 index e5e3010356..0000000000 --- a/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch +++ /dev/null @@ -1,34 +0,0 @@ -From baf3d128e5bdf9d322539609133a15b493b0c2ef Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:35 +0200 -Subject: [PATCH] USB: bcma: remove chip id check - -I have never seen any bcma device with an USB host core which was not a -SoC, the bcma devices have an USB device core with a different core id. -Some SoC have IDs with 47XX and 53XX in decimal form which would be -rejected by this check. Instead of fixing this check just remove it. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 5 ----- - 1 file changed, 5 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -214,16 +214,11 @@ err_alloc: - static int bcma_hcd_probe(struct bcma_device *dev) - { - int err; -- u16 chipid_top; - u32 ohci_addr; - struct bcma_hcd_device *usb_dev; - struct bcma_chipinfo *chipinfo; - - chipinfo = &dev->bus->chipinfo; -- /* USBcores are only connected on embedded devices. */ -- chipid_top = (chipinfo->id & 0xFF00); -- if (chipid_top != 0x4700 && chipid_top != 0x5300) -- return -ENODEV; - - /* TODO: Probably need checks here; is the core connected? */ - diff --git a/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch b/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch deleted file mode 100644 index 5ae4e0d7aa..0000000000 --- a/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch +++ /dev/null @@ -1,24 +0,0 @@ -From f5bc834917a8b1b9487749bdfe8eda52a01967b4 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:36 +0200 -Subject: [PATCH] USB: bcma: replace numbers with constants - -The constants for these numbers were added long time ago, use them. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -233,7 +233,8 @@ static int bcma_hcd_probe(struct bcma_de - - /* In AI chips EHCI is addrspace 0, OHCI is 1 */ - ohci_addr = dev->addr_s[0]; -- if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) -+ if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 || -+ chipinfo->id == BCMA_CHIP_ID_BCM4749) - && chipinfo->rev == 0) - ohci_addr = 0x18009000; - diff --git a/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch b/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch deleted file mode 100644 index 700d354332..0000000000 --- a/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 93724affb195149df6f7630901d878f6e273fa02 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:37 +0200 -Subject: [PATCH] USB: bcma: use devm_kzalloc - -Instead of manually handling the frees use devm. There was also a free -missing in the unregister call which is not needed with devm. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 11 ++++------- - 1 file changed, 4 insertions(+), 7 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -225,7 +225,8 @@ static int bcma_hcd_probe(struct bcma_de - if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) - return -EOPNOTSUPP; - -- usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); -+ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device), -+ GFP_KERNEL); - if (!usb_dev) - return -ENOMEM; - -@@ -239,10 +240,8 @@ static int bcma_hcd_probe(struct bcma_de - ohci_addr = 0x18009000; - - usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); -- if (IS_ERR(usb_dev->ohci_dev)) { -- err = PTR_ERR(usb_dev->ohci_dev); -- goto err_free_usb_dev; -- } -+ if (IS_ERR(usb_dev->ohci_dev)) -+ return PTR_ERR(usb_dev->ohci_dev); - - usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); - if (IS_ERR(usb_dev->ehci_dev)) { -@@ -255,8 +254,6 @@ static int bcma_hcd_probe(struct bcma_de - - err_unregister_ohci_dev: - platform_device_unregister(usb_dev->ohci_dev); --err_free_usb_dev: -- kfree(usb_dev); - return err; - } - diff --git a/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch b/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch deleted file mode 100644 index 91cd0fa320..0000000000 --- a/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 232996d1ba3002e7e80b18075e2838fc86f21412 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:38 +0200 -Subject: [PATCH] USB: bcma: fix error handling in bcma_hcd_create_pdev() - -This patch makes bcma_hcd_create_pdev() not return NULL, but a prober -error code in case of an error. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -169,7 +169,7 @@ static struct platform_device *bcma_hcd_ - { - struct platform_device *hci_dev; - struct resource hci_res[2]; -- int ret = -ENOMEM; -+ int ret; - - memset(hci_res, 0, sizeof(hci_res)); - -@@ -183,7 +183,7 @@ static struct platform_device *bcma_hcd_ - hci_dev = platform_device_alloc(ohci ? "ohci-platform" : - "ehci-platform" , 0); - if (!hci_dev) -- return NULL; -+ return ERR_PTR(-ENOMEM); - - hci_dev->dev.parent = &dev->dev; - hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; diff --git a/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch b/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch deleted file mode 100644 index 920efdcab4..0000000000 --- a/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch +++ /dev/null @@ -1,133 +0,0 @@ -From b65851f41c22b8c69b8fe9ca7782d19ed2155efc Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:39 +0200 -Subject: [PATCH] USB: bcma: add bcm53xx support - -The Broadcom ARM SoCs with this usb core need a different -initialization and they have a different core id. This patch adds -support for these USB 2.0 core. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 81 +++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 78 insertions(+), 3 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -2,7 +2,8 @@ - * Broadcom specific Advanced Microcontroller Bus - * Broadcom USB-core driver (BCMA bus glue) - * -- * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> -+ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de> -+ * Copyright 2015 Felix Fietkau <nbd@openwrt.org> - * - * Based on ssb-ohci driver - * Copyright 2007 Michael Buesch <m@bues.ch> -@@ -88,7 +89,7 @@ static void bcma_hcd_4716wa(struct bcma_ - } - - /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ --static void bcma_hcd_init_chip(struct bcma_device *dev) -+static void bcma_hcd_init_chip_mips(struct bcma_device *dev) - { - u32 tmp; - -@@ -159,6 +160,70 @@ static void bcma_hcd_init_chip(struct bc - } - } - -+static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev) -+{ -+ struct bcma_device *arm_core; -+ void __iomem *dmu; -+ -+ arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9); -+ if (!arm_core) { -+ dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n"); -+ return; -+ } -+ -+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000); -+ if (!dmu) { -+ dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n"); -+ return; -+ } -+ -+ /* Unlock DMU PLL settings */ -+ iowrite32(0x0000ea68, dmu + 0x180); -+ -+ /* Write USB 2.0 PLL control setting */ -+ iowrite32(0x00dd10c3, dmu + 0x164); -+ -+ /* Lock DMU PLL settings */ -+ iowrite32(0x00000000, dmu + 0x180); -+ -+ iounmap(dmu); -+} -+ -+static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev) -+{ -+ u32 val; -+ -+ /* -+ * Delay after PHY initialized to ensure HC is ready to be configured -+ */ -+ usleep_range(1000, 2000); -+ -+ /* Set packet buffer OUT threshold */ -+ val = bcma_read32(dev, 0x94); -+ val &= 0xffff; -+ val |= 0x80 << 16; -+ bcma_write32(dev, 0x94, val); -+ -+ /* Enable break memory transfer */ -+ val = bcma_read32(dev, 0x9c); -+ val |= 1; -+ bcma_write32(dev, 0x9c, val); -+} -+ -+static void bcma_hcd_init_chip_arm(struct bcma_device *dev) -+{ -+ bcma_core_enable(dev, 0); -+ -+ if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 || -+ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) { -+ if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 || -+ dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708) -+ bcma_hcd_init_chip_arm_phy(dev); -+ -+ bcma_hcd_init_chip_arm_hc(dev); -+ } -+} -+ - static const struct usb_ehci_pdata ehci_pdata = { - }; - -@@ -230,7 +295,16 @@ static int bcma_hcd_probe(struct bcma_de - if (!usb_dev) - return -ENOMEM; - -- bcma_hcd_init_chip(dev); -+ switch (dev->id.id) { -+ case BCMA_CORE_NS_USB20: -+ bcma_hcd_init_chip_arm(dev); -+ break; -+ case BCMA_CORE_USB20_HOST: -+ bcma_hcd_init_chip_mips(dev); -+ break; -+ default: -+ return -ENODEV; -+ } - - /* In AI chips EHCI is addrspace 0, OHCI is 1 */ - ohci_addr = dev->addr_s[0]; -@@ -299,6 +373,7 @@ static int bcma_hcd_resume(struct bcma_d - - static const struct bcma_device_id bcma_hcd_table[] = { - BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS), - BCMA_CORETABLE_END - }; - MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); diff --git a/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch b/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch deleted file mode 100644 index d9a8a1e621..0000000000 --- a/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch +++ /dev/null @@ -1,82 +0,0 @@ -From f3cf44a313b3687efd55ba091558e20a4d218c31 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 11 Jun 2015 22:57:40 +0200 -Subject: [PATCH] USB: bcma: add support for controlling bus power through GPIO - -On some boards a GPIO is needed to activate USB controller. Make it -possible to specify such a GPIO in device tree. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/host/bcma-hcd.c | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -24,6 +24,8 @@ - #include <linux/platform_device.h> - #include <linux/module.h> - #include <linux/slab.h> -+#include <linux/of.h> -+#include <linux/of_gpio.h> - #include <linux/usb/ehci_pdriver.h> - #include <linux/usb/ohci_pdriver.h> - -@@ -224,6 +226,23 @@ static void bcma_hcd_init_chip_arm(struc - } - } - -+static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val) -+{ -+ int gpio; -+ -+ gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0); -+ if (!gpio_is_valid(gpio)) -+ return; -+ -+ if (val) { -+ gpio_request(gpio, "bcma-hcd-gpio"); -+ gpio_set_value(gpio, 1); -+ } else { -+ gpio_set_value(gpio, 0); -+ gpio_free(gpio); -+ } -+} -+ - static const struct usb_ehci_pdata ehci_pdata = { - }; - -@@ -295,6 +314,8 @@ static int bcma_hcd_probe(struct bcma_de - if (!usb_dev) - return -ENOMEM; - -+ bcma_hci_platform_power_gpio(dev, true); -+ - switch (dev->id.id) { - case BCMA_CORE_NS_USB20: - bcma_hcd_init_chip_arm(dev); -@@ -347,6 +368,7 @@ static void bcma_hcd_remove(struct bcma_ - - static void bcma_hcd_shutdown(struct bcma_device *dev) - { -+ bcma_hci_platform_power_gpio(dev, false); - bcma_core_disable(dev, 0); - } - -@@ -354,6 +376,7 @@ static void bcma_hcd_shutdown(struct bcm - - static int bcma_hcd_suspend(struct bcma_device *dev) - { -+ bcma_hci_platform_power_gpio(dev, false); - bcma_core_disable(dev, 0); - - return 0; -@@ -361,6 +384,7 @@ static int bcma_hcd_suspend(struct bcma_ - - static int bcma_hcd_resume(struct bcma_device *dev) - { -+ bcma_hci_platform_power_gpio(dev, true); - bcma_core_enable(dev, 0); - - return 0; diff --git a/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch b/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch deleted file mode 100644 index 56db9c1577..0000000000 --- a/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch +++ /dev/null @@ -1,195 +0,0 @@ -From 26023cdfacaf116545b1087b9d1fe50dc6fbda10 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 24 Sep 2014 22:14:07 +0200 -Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache for decompression -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Without this fix kernel was randomly hanging in ~25% of tries during -early init. Hangs used to happen at random places in the start_kernel. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/compressed/Makefile | 5 + - arch/arm/boot/compressed/head-bcm_5301x-mpcore.S | 37 +++++++ - arch/arm/boot/compressed/mpcore_cache.S | 118 +++++++++++++++++++++++ - 3 files changed, 160 insertions(+) - create mode 100644 arch/arm/boot/compressed/head-bcm_5301x-mpcore.S - create mode 100644 arch/arm/boot/compressed/mpcore_cache.S - ---- a/arch/arm/boot/compressed/Makefile -+++ b/arch/arm/boot/compressed/Makefile -@@ -46,6 +46,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y) - OBJS += ll_char_wr.o font.o - endif - -+ifeq ($(CONFIG_ARCH_BCM_5301X),y) -+OBJS += head-bcm_5301x-mpcore.o -+OBJS += mpcore_cache.o -+endif -+ - ifeq ($(CONFIG_ARCH_SA1100),y) - OBJS += head-sa1100.o - endif ---- /dev/null -+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S -@@ -0,0 +1,37 @@ -+/* -+ * -+ * Platform specific tweaks. This is merged into head.S by the linker. -+ * -+ */ -+ -+#include <linux/linkage.h> -+#include <asm/assembler.h> -+#include <asm/cp15.h> -+ -+ .section ".start", "ax" -+ -+/* -+ * This code section is spliced into the head code by the linker -+ */ -+ -+__plat_uncompress_start: -+ -+ @ Preserve r8/r7 i.e. kernel entry values -+ mov r12, r8 -+ -+ @ Clear MMU enable and Dcache enable bits -+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR -+ bic r0, #CR_C|CR_M -+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR -+ nop -+ -+ @ Call the cache invalidation routine -+ bl v7_all_dcache_invalidate -+ nop -+ mov r0,#0 -+ ldr r3, =0x19022000 @ L2 cache controller, control reg -+ str r0, [r3, #0x100] @ Disable L2 cache -+ nop -+ -+ @ Restore -+ mov r8, r12 ---- /dev/null -+++ b/arch/arm/boot/compressed/mpcore_cache.S -@@ -0,0 +1,118 @@ -+/***************************************************************************** -+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include <linux/linkage.h> -+#include <linux/init.h> -+ -+ __INIT -+ -+/* -+ * v7_l1_cache_invalidate -+ * -+ * Invalidate contents of L1 cache without flushing its contents -+ * into outer cache and memory. This is needed when the contents -+ * of the cache are unpredictable after power-up. -+ * -+ * corrupts r0-r6 -+ */ -+ -+ENTRY(v7_l1_cache_invalidate) -+ mov r0, #0 -+ mcr p15, 2, r0, c0, c0, 0 @ set cache level to 1 -+ mrc p15, 1, r0, c0, c0, 0 @ read CLIDR -+ -+ ldr r1, =0x7fff -+ and r2, r1, r0, lsr #13 @ get max # of index size -+ -+ ldr r1, =0x3ff -+ and r3, r1, r0, lsr #3 @ NumWays - 1 -+ add r2, r2, #1 @ NumSets -+ -+ and r0, r0, #0x7 -+ add r0, r0, #4 @ SetShift -+ -+ clz r1, r3 @ WayShift -+ add r4, r3, #1 @ NumWays -+1: sub r2, r2, #1 @ NumSets-- -+ mov r3, r4 @ Temp = NumWays -+2: subs r3, r3, #1 @ Temp-- -+ mov r5, r3, lsl r1 -+ mov r6, r2, lsl r0 -+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) -+ mcr p15, 0, r5, c7, c6, 2 @ Invalidate line -+ bgt 2b -+ cmp r2, #0 -+ bgt 1b -+ dsb -+ mov r0,#0 -+ mcr p15,0,r0,c7,c5,0 /* Invalidate icache */ -+ isb -+ mov pc, lr -+ENDPROC(v7_l1_cache_invalidate) -+ -+/* -+ * v7_all_dcache_invalidate -+ * -+ * Invalidate without flushing the contents of all cache levels -+ * accesible by the current processor core. -+ * This is useful when the contents of cache memory are undetermined -+ * at power-up. -+ * Corrupted registers: r0-r7, r9-r11 -+ * -+ * Based on cache-v7.S: v7_flush_dcache_all() -+ */ -+ -+ENTRY(v7_all_dcache_invalidate) -+ mrc p15, 1, r0, c0, c0, 1 @ read clidr -+ ands r3, r0, #0x7000000 @ extract loc from clidr -+ mov r3, r3, lsr #23 @ left align loc bit field -+ beq finished @ if loc is 0, then no need to clean -+ mov r10, #0 @ start clean at cache level 0 -+loop1: -+ add r2, r10, r10, lsr #1 @ work out 3x current cache level -+ mov r1, r0, lsr r2 @ extract cache type bits from clidr -+ and r1, r1, #7 @ mask of bits for current cache only -+ cmp r1, #2 @ see what cache we have at this level -+ blt skip @ skip if no cache, or just i-cache -+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr -+ isb @ isb to sych the new cssr&csidr -+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr -+ and r2, r1, #7 @ extract the length of the cache lines -+ add r2, r2, #4 @ add 4 (line length offset) -+ ldr r4, =0x3ff -+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size -+ clz r5, r4 @ find bit pos of way size increment -+ ldr r7, =0x7fff -+ ands r7, r7, r1, lsr #13 @ extract max number of the index size -+loop2: -+ mov r9, r4 @ create working copy of max way size -+loop3: -+ orr r11, r10, r9, lsl r5 @ factor way and cache number into r11 -+ orr r11, r11, r7, lsl r2 @ factor index number into r11 -+ mcr p15, 0, r11, c7, c6, 2 @ Invalidate line -+ subs r9, r9, #1 @ decrement the way -+ bge loop3 -+ subs r7, r7, #1 @ decrement the index -+ bge loop2 -+skip: -+ add r10, r10, #2 @ increment cache number -+ cmp r3, r10 -+ bgt loop1 -+finished: -+ mov r10, #0 @ swith back to cache level 0 -+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr -+ dsb -+ isb -+ mov pc, lr -+ENDPROC(v7_all_dcache_invalidate) diff --git a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch b/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch deleted file mode 100644 index 3d054a80d6..0000000000 --- a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch +++ /dev/null @@ -1,26 +0,0 @@ -From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 7 Jun 2015 16:18:18 +0200 -Subject: [PATCH] ARM: BCM5301X: Add SPROM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -102,6 +102,10 @@ - }; - }; - -+ sprom0: sprom@0 { -+ compatible = "brcm,bcm47xx-sprom"; -+ }; -+ - axi@18000000 { - compatible = "brcm,bus-axi"; - reg = <0x18000000 0x1000>; diff --git a/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch b/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch deleted file mode 100644 index a2bed2aeb7..0000000000 --- a/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 4a658590f83c1e916ab63ed7fe6f0841924247db Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Fri, 3 Oct 2014 18:37:33 +0200 -Subject: [PATCH 2/2] ARM: BCM53XX: set customized AUXCTL - -This activated some more features in the l310 cache. - -This is based on some vendor code - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/arm/mach-bcm/bcm_5301x.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - ---- a/arch/arm/mach-bcm/bcm_5301x.c -+++ b/arch/arm/mach-bcm/bcm_5301x.c -@@ -50,7 +50,12 @@ static const char __initconst *bcm5301x_ - }; - - DT_MACHINE_START(BCM5301X, "BCM5301X") -- .l2c_aux_val = 0, -+ .l2c_aux_val = L310_AUX_CTRL_CACHE_REPLACE_RR | -+ L310_AUX_CTRL_DATA_PREFETCH | -+ L310_AUX_CTRL_INSTR_PREFETCH | -+ L310_AUX_CTRL_EARLY_BRESP | -+ L2C_AUX_CTRL_SHARED_OVERRIDE | -+ L310_AUX_CTRL_FULL_LINE_ZERO, - .l2c_aux_mask = ~0, - .init_early = bcm5301x_init_early, - .dt_compat = bcm5301x_dt_compat, diff --git a/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch b/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch deleted file mode 100644 index 802188db17..0000000000 --- a/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 504dba5b073a9009ae1e3f2fc53ea9c3aa10c38a Mon Sep 17 00:00:00 2001 -From: Felix Fietkau <nbd@openwrt.org> -Date: Wed, 13 May 2015 20:56:38 +0200 -Subject: [PATCH] ARM: BCM5301X: Add Buffalo WXR-1900DHP clock and USB power - control -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -24,6 +24,23 @@ - reg = <0x00000000 0x08000000>; - }; - -+ clocks { -+ clk_periph: periph { -+ clock-frequency = <500000000>; -+ }; -+ }; -+ -+ axi@18000000 { -+ usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - diff --git a/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch b/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch deleted file mode 100644 index 871598f2e0..0000000000 --- a/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch +++ /dev/null @@ -1,63 +0,0 @@ -From f1ee1275f65e87e035260f4d09a0f0ba98c6854d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 21 Jun 2015 12:56:32 +0200 -Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 20 ++++++++++++++++++++ - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 +++++++++++ - 2 files changed, 31 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -24,6 +24,26 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ - spi { - compatible = "spi-gpio"; - num-chipselects = <1>; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -24,6 +24,17 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ - leds { - compatible = "gpio-leds"; - diff --git a/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch deleted file mode 100644 index 86025c10eb..0000000000 --- a/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch +++ /dev/null @@ -1,159 +0,0 @@ -From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 14 Jan 2015 08:33:25 +0100 -Subject: [PATCH] ARM: BCM5310X: Enable earlyprintk on tested devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +- - 4 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-1750DHP (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -17,7 +17,7 @@ - model = "Netgear R6250 V1 (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-N18U (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-600DHP2 (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WZR-900DHP (BCM47081)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -17,7 +17,7 @@ - model = "Netgear R8000 (BCM4709)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-AC56U (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -17,7 +17,7 @@ - model = "Asus RT-AC68U (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -17,7 +17,7 @@ - model = "Luxul XWC-1000 (BCM4708)"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -17,7 +17,7 @@ - model = "Buffalo WXR-1900DHP"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -17,7 +17,7 @@ - model = "SmartRG SR400ac"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -16,7 +16,7 @@ - model = "Asus RT-AC87U"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -17,7 +17,7 @@ - model = "Netgear R7000"; - - chosen { -- bootargs = "console=ttyS0,115200"; -+ bootargs = "console=ttyS0,115200 earlyprintk"; - }; - - memory { diff --git a/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch deleted file mode 100644 index 026ef8d564..0000000000 --- a/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 36b2fbb3badf0e32b371e1f7579a95d4fe25c0e1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 14 Jan 2015 09:13:58 +0100 -Subject: [PATCH] ARM: BCM5301X: Specify RAM on devices by including HIGHMEM -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++- - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++- - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++- - arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++- - 5 files changed, 10 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; - }; - - axi@18000000 { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - axi@18000000 { ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - spi { ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - gpio-keys { ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x18000000>; - }; - - clocks { ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -20,7 +20,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -21,7 +21,8 @@ - }; - - memory { -- reg = <0x00000000 0x08000000>; -+ reg = <0x00000000 0x08000000 -+ 0x88000000 0x08000000>; - }; - - leds { diff --git a/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch deleted file mode 100644 index f9ca7eb7c1..0000000000 --- a/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Felix Fietkau <nbd@openwrt.org> -Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> ---- ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -123,6 +123,12 @@ - #address-cells = <1>; - #size-cells = <0>; - -+ power { -+ label = "Power"; -+ linux,code = <KEY_POWER>; -+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; -+ }; -+ - restart { - label = "Reset"; - linux,code = <KEY_RESTART>; diff --git a/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch deleted file mode 100644 index 5fe4288576..0000000000 --- a/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch +++ /dev/null @@ -1,111 +0,0 @@ -From b49d7bb4825654f81bcee8e219028712811515a5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 29 Jun 2015 08:11:36 +0200 -Subject: [PATCH] ARM: BCM5301X: Enable ChipCommon UART on untested devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++++ - arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++++ - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++ - arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++++ - arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++++ - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 5 +++++ - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 5 +++++ - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 5 +++++ - 8 files changed, 35 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -96,3 +96,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts -@@ -83,3 +83,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -83,3 +83,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts -@@ -77,3 +77,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts -@@ -37,3 +37,7 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -64,3 +64,8 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+ clock-frequency = <125000000>; -+}; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -144,3 +144,8 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+ clock-frequency = <125000000>; -+}; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -77,3 +77,8 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+ clock-frequency = <125000000>; -+}; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -104,4 +104,5 @@ - - &uart0 { - status = "okay"; -+ clock-frequency = <125000000>; - }; diff --git a/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch b/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch deleted file mode 100644 index c3eae417c9..0000000000 --- a/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch +++ /dev/null @@ -1,37 +0,0 @@ -From b97e582cd05f6ba80bdb63d9f677a3395edc7ff1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 7 Jun 2015 15:37:43 +0200 -Subject: [PATCH] ARM: BCM5301X: Add back Luxul XWC-1000 NAND flash layout -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -In OpenWrt we still use old NAND driver instead of "brcm,nandcs", so -we need to add this DT entry back. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -24,6 +24,18 @@ - reg = <0x00000000 0x08000000>; - }; - -+ axi@18000000 { -+ nand@28000 { -+ reg = <0x00028000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "ubi"; -+ reg = <0x00000000 0x08000000>; -+ }; -+ }; -+ }; -+ - nand: nand@18028000 { - nandcs@0 { - partition@0 { diff --git a/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch b/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch deleted file mode 100644 index ccdb28b54d..0000000000 --- a/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d658c21d6697293a928434fd6ac19264b5a8948d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Fri, 30 Jan 2015 08:25:54 +0100 -Subject: [PATCH] mtd: bcm47xxpart: scan whole flash on ARCH_BCM_5301X -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -120,9 +120,15 @@ static int bcm47xxpart_parse(struct mtd_ - /* Parse block by block looking for magics */ - for (offset = 0; offset <= master->size - blocksize; - offset += blocksize) { -+#ifndef CONFIG_ARCH_BCM_5301X -+ /* -+ * ARM routers may have partitions in higher memory. E.g. -+ * Netgear R8000 has board_data at 0x2600000. -+ */ - /* Nothing more in higher memory */ - if (offset >= 0x2000000) - break; -+#endif - - if (curr_part >= BCM47XXPART_MAX_PARTS) { - pr_warn("Reached maximum number of partitions, scanning stopped!\n"); diff --git a/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch deleted file mode 100644 index 41ef3b300e..0000000000 --- a/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/mtd/spi-nor/Kconfig -+++ b/drivers/mtd/spi-nor/Kconfig -@@ -28,4 +28,10 @@ config SPI_FSL_QUADSPI - This enables support for the Quad SPI controller in master mode. - We only connect the NOR to this controller now. - -+config MTD_SPI_BCM53XXSPIFLASH -+ tristate "SPI-NOR flashes connected to the Broadcom ARM SoC" -+ depends on MTD_SPI_NOR -+ help -+ SPI driver for flashes used on Broadcom ARM SoCs. -+ - endif # MTD_SPI_NOR ---- a/drivers/mtd/spi-nor/Makefile -+++ b/drivers/mtd/spi-nor/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o - obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o -+obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH) += bcm53xxspiflash.o diff --git a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch b/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch deleted file mode 100644 index 199f1e5500..0000000000 --- a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch +++ /dev/null @@ -1,1608 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -516,4 +516,10 @@ config MTD_NAND_XWAY - Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached - to the External Bus Unit (EBU). - -+config MTD_NAND_BCM -+ tristate "Support for NAND on some Broadcom SoC" -+ help -+ This driver is currently used for the NAND flash controller on the -+ Broadcom BCM5301X (NorthStar) SoCs. -+ - endif # MTD_NAND ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740 - obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ - obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o - obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ -+obj-$(CONFIG_MTD_NAND_BCM) += bcm_nand.o - - nand-objs := nand_base.o nand_bbt.o nand_timings.o ---- /dev/null -+++ b/drivers/mtd/nand/bcm_nand.c -@@ -0,0 +1,1583 @@ -+/* -+ * Nortstar NAND controller driver -+ * -+ * (c) Broadcom, Inc. 2012 All Rights Reserved. -+ * Copyright 2014 Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ * -+ * This module interfaces the NAND controller and hardware ECC capabilities -+ * tp the generic NAND chip support in the NAND library. -+ * -+ * Notes: -+ * This driver depends on generic NAND driver, but works at the -+ * page level for operations. -+ * -+ * When a page is written, the ECC calculated also protects the OOB -+ * bytes not taken by ECC, and so the OOB must be combined with any -+ * OOB data that preceded the page-write operation in order for the -+ * ECC to be calculated correctly. -+ * Also, when the page is erased, but OOB data is not, HW ECC will -+ * indicate an error, because it checks OOB too, which calls for some -+ * help from the software in this driver. -+ * -+ * TBD: -+ * Block locking/unlocking support, OTP support -+ */ -+ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/io.h> -+#include <linux/ioport.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/slab.h> -+#include <linux/bcma/bcma.h> -+#include <linux/of_irq.h> -+ -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/nand.h> -+#include <linux/mtd/partitions.h> -+ -+#define NANDC_MAX_CHIPS 2 /* Only 2 CSn supported in NorthStar */ -+ -+/* -+ * Driver private control structure -+ */ -+struct bcmnand_ctrl { -+ struct mtd_info mtd; -+ struct nand_chip nand; -+ struct bcma_device *core; -+ -+ struct completion op_completion; -+ -+ struct nand_ecclayout ecclayout; -+ int cmd_ret; /* saved error code */ -+ unsigned char oob_index; -+ unsigned char id_byte_index; -+ unsigned char chip_num; -+ unsigned char last_cmd; -+ unsigned char ecc_level; -+ unsigned char sector_size_shift; -+ unsigned char sec_per_page_shift; -+}; -+ -+ -+/* -+ * IRQ numbers - offset from first irq in nandc_irq resource -+ */ -+#define NANDC_IRQ_RD_MISS 0 -+#define NANDC_IRQ_ERASE_COMPLETE 1 -+#define NANDC_IRQ_COPYBACK_COMPLETE 2 -+#define NANDC_IRQ_PROGRAM_COMPLETE 3 -+#define NANDC_IRQ_CONTROLLER_RDY 4 -+#define NANDC_IRQ_RDBSY_RDY 5 -+#define NANDC_IRQ_ECC_UNCORRECTABLE 6 -+#define NANDC_IRQ_ECC_CORRECTABLE 7 -+#define NANDC_IRQ_NUM 8 -+ -+struct bcmnand_reg_field { -+ unsigned int reg; -+ unsigned int pos; -+ unsigned int width; -+}; -+ -+/* -+ * REGISTERS -+ * -+ * Individual bit-fields aof registers are specificed here -+ * for clarity, and the rest of the code will access each field -+ * as if it was its own register. -+ * -+ * Following registers are off <reg_base>: -+ */ -+#define REG_BIT_FIELD(r, p, w) ((struct bcmnand_reg_field){(r), (p), (w)}) -+ -+#define NANDC_8KB_PAGE_SUPPORT REG_BIT_FIELD(0x0, 31, 1) -+#define NANDC_REV_MAJOR REG_BIT_FIELD(0x0, 8, 8) -+#define NANDC_REV_MINOR REG_BIT_FIELD(0x0, 0, 8) -+ -+#define NANDC_CMD_START_OPCODE REG_BIT_FIELD(0x4, 24, 5) -+ -+#define NANDC_CMD_CS_SEL REG_BIT_FIELD(0x8, 16, 3) -+#define NANDC_CMD_EXT_ADDR REG_BIT_FIELD(0x8, 0, 16) -+ -+#define NANDC_CMD_ADDRESS REG_BIT_FIELD(0xc, 0, 32) -+#define NANDC_CMD_END_ADDRESS REG_BIT_FIELD(0x10, 0, 32) -+ -+#define NANDC_INT_STATUS REG_BIT_FIELD(0x14, 0, 32) -+#define NANDC_INT_STAT_CTLR_RDY REG_BIT_FIELD(0x14, 31, 1) -+#define NANDC_INT_STAT_FLASH_RDY REG_BIT_FIELD(0x14, 30, 1) -+#define NANDC_INT_STAT_CACHE_VALID REG_BIT_FIELD(0x14, 29, 1) -+#define NANDC_INT_STAT_SPARE_VALID REG_BIT_FIELD(0x14, 28, 1) -+#define NANDC_INT_STAT_ERASED REG_BIT_FIELD(0x14, 27, 1) -+#define NANDC_INT_STAT_PLANE_RDY REG_BIT_FIELD(0x14, 26, 1) -+#define NANDC_INT_STAT_FLASH_STATUS REG_BIT_FIELD(0x14, 0, 8) -+ -+#define NANDC_CS_LOCK REG_BIT_FIELD(0x18, 31, 1) -+#define NANDC_CS_AUTO_CONFIG REG_BIT_FIELD(0x18, 30, 1) -+#define NANDC_CS_NAND_WP REG_BIT_FIELD(0x18, 29, 1) -+#define NANDC_CS_BLK0_WP REG_BIT_FIELD(0x18, 28, 1) -+#define NANDC_CS_SW_USING_CS(n) REG_BIT_FIELD(0x18, 8+(n), 1) -+#define NANDC_CS_MAP_SEL_CS(n) REG_BIT_FIELD(0x18, 0+(n), 1) -+ -+#define NANDC_XOR_ADDR_BLK0_ONLY REG_BIT_FIELD(0x1c, 31, 1) -+#define NANDC_XOR_ADDR_CS(n) REG_BIT_FIELD(0x1c, 0+(n), 1) -+ -+#define NANDC_LL_OP_RET_IDLE REG_BIT_FIELD(0x20, 31, 1) -+#define NANDC_LL_OP_CLE REG_BIT_FIELD(0x20, 19, 1) -+#define NANDC_LL_OP_ALE REG_BIT_FIELD(0x20, 18, 1) -+#define NANDC_LL_OP_WE REG_BIT_FIELD(0x20, 17, 1) -+#define NANDC_LL_OP_RE REG_BIT_FIELD(0x20, 16, 1) -+#define NANDC_LL_OP_DATA REG_BIT_FIELD(0x20, 0, 16) -+ -+#define NANDC_MPLANE_ADDR_EXT REG_BIT_FIELD(0x24, 0, 16) -+#define NANDC_MPLANE_ADDR REG_BIT_FIELD(0x28, 0, 32) -+ -+#define NANDC_ACC_CTRL_CS(n) REG_BIT_FIELD(0x50+((n)<<4), 0, 32) -+#define NANDC_ACC_CTRL_RD_ECC(n) REG_BIT_FIELD(0x50+((n)<<4), 31, 1) -+#define NANDC_ACC_CTRL_WR_ECC(n) REG_BIT_FIELD(0x50+((n)<<4), 30, 1) -+#define NANDC_ACC_CTRL_CE_CARE(n) REG_BIT_FIELD(0x50+((n)<<4), 29, 1) -+#define NANDC_ACC_CTRL_PGM_RDIN(n) REG_BIT_FIELD(0x50+((n)<<4), 28, 1) -+#define NANDC_ACC_CTRL_ERA_ECC_ERR(n) REG_BIT_FIELD(0x50+((n)<<4), 27, 1) -+#define NANDC_ACC_CTRL_PGM_PARTIAL(n) REG_BIT_FIELD(0x50+((n)<<4), 26, 1) -+#define NANDC_ACC_CTRL_WR_PREEMPT(n) REG_BIT_FIELD(0x50+((n)<<4), 25, 1) -+#define NANDC_ACC_CTRL_PG_HIT(n) REG_BIT_FIELD(0x50+((n)<<4), 24, 1) -+#define NANDC_ACC_CTRL_PREFETCH(n) REG_BIT_FIELD(0x50+((n)<<4), 23, 1) -+#define NANDC_ACC_CTRL_CACHE_MODE(n) REG_BIT_FIELD(0x50+((n)<<4), 22, 1) -+#define NANDC_ACC_CTRL_CACHE_LASTPG(n) REG_BIT_FIELD(0x50+((n)<<4), 21, 1) -+#define NANDC_ACC_CTRL_ECC_LEVEL(n) REG_BIT_FIELD(0x50+((n)<<4), 16, 5) -+#define NANDC_ACC_CTRL_SECTOR_1K(n) REG_BIT_FIELD(0x50+((n)<<4), 7, 1) -+#define NANDC_ACC_CTRL_SPARE_SIZE(n) REG_BIT_FIELD(0x50+((n)<<4), 0, 7) -+ -+#define NANDC_CONFIG_CS(n) REG_BIT_FIELD(0x54+((n)<<4), 0, 32) -+#define NANDC_CONFIG_LOCK(n) REG_BIT_FIELD(0x54+((n)<<4), 31, 1) -+#define NANDC_CONFIG_BLK_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 28, 3) -+#define NANDC_CONFIG_CHIP_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 24, 4) -+#define NANDC_CONFIG_CHIP_WIDTH(n) REG_BIT_FIELD(0x54+((n)<<4), 23, 1) -+#define NANDC_CONFIG_PAGE_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 20, 2) -+#define NANDC_CONFIG_FUL_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 16, 3) -+#define NANDC_CONFIG_COL_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 12, 3) -+#define NANDC_CONFIG_BLK_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 8, 3) -+ -+#define NANDC_TIMING_1_CS(n) REG_BIT_FIELD(0x58+((n)<<4), 0, 32) -+#define NANDC_TIMING_2_CS(n) REG_BIT_FIELD(0x5c+((n)<<4), 0, 32) -+ /* Individual bits for Timing registers - TBD */ -+ -+#define NANDC_CORR_STAT_THRESH_CS(n) REG_BIT_FIELD(0xc0, 6*(n), 6) -+ -+#define NANDC_BLK_WP_END_ADDR REG_BIT_FIELD(0xc8, 0, 32) -+ -+#define NANDC_MPLANE_ERASE_CYC2_OPCODE REG_BIT_FIELD(0xcc, 24, 8) -+#define NANDC_MPLANE_READ_STAT_OPCODE REG_BIT_FIELD(0xcc, 16, 8) -+#define NANDC_MPLANE_PROG_ODD_OPCODE REG_BIT_FIELD(0xcc, 8, 8) -+#define NANDC_MPLANE_PROG_TRL_OPCODE REG_BIT_FIELD(0xcc, 0, 8) -+ -+#define NANDC_MPLANE_PGCACHE_TRL_OPCODE REG_BIT_FIELD(0xd0, 24, 8) -+#define NANDC_MPLANE_READ_STAT2_OPCODE REG_BIT_FIELD(0xd0, 16, 8) -+#define NANDC_MPLANE_READ_EVEN_OPCODE REG_BIT_FIELD(0xd0, 8, 8) -+#define NANDC_MPLANE_READ_ODD__OPCODE REG_BIT_FIELD(0xd0, 0, 8) -+ -+#define NANDC_MPLANE_CTRL_ERASE_CYC2_EN REG_BIT_FIELD(0xd4, 31, 1) -+#define NANDC_MPLANE_CTRL_RD_ADDR_SIZE REG_BIT_FIELD(0xd4, 30, 1) -+#define NANDC_MPLANE_CTRL_RD_CYC_ADDR REG_BIT_FIELD(0xd4, 29, 1) -+#define NANDC_MPLANE_CTRL_RD_COL_ADDR REG_BIT_FIELD(0xd4, 28, 1) -+ -+#define NANDC_UNCORR_ERR_COUNT REG_BIT_FIELD(0xfc, 0, 32) -+ -+#define NANDC_CORR_ERR_COUNT REG_BIT_FIELD(0x100, 0, 32) -+ -+#define NANDC_READ_CORR_BIT_COUNT REG_BIT_FIELD(0x104, 0, 32) -+ -+#define NANDC_BLOCK_LOCK_STATUS REG_BIT_FIELD(0x108, 0, 8) -+ -+#define NANDC_ECC_CORR_ADDR_CS REG_BIT_FIELD(0x10c, 16, 3) -+#define NANDC_ECC_CORR_ADDR_EXT REG_BIT_FIELD(0x10c, 0, 16) -+ -+#define NANDC_ECC_CORR_ADDR REG_BIT_FIELD(0x110, 0, 32) -+ -+#define NANDC_ECC_UNC_ADDR_CS REG_BIT_FIELD(0x114, 16, 3) -+#define NANDC_ECC_UNC_ADDR_EXT REG_BIT_FIELD(0x114, 0, 16) -+ -+#define NANDC_ECC_UNC_ADDR REG_BIT_FIELD(0x118, 0, 32) -+ -+#define NANDC_READ_ADDR_CS REG_BIT_FIELD(0x11c, 16, 3) -+#define NANDC_READ_ADDR_EXT REG_BIT_FIELD(0x11c, 0, 16) -+#define NANDC_READ_ADDR REG_BIT_FIELD(0x120, 0, 32) -+ -+#define NANDC_PROG_ADDR_CS REG_BIT_FIELD(0x124, 16, 3) -+#define NANDC_PROG_ADDR_EXT REG_BIT_FIELD(0x124, 0, 16) -+#define NANDC_PROG_ADDR REG_BIT_FIELD(0x128, 0, 32) -+ -+#define NANDC_CPYBK_ADDR_CS REG_BIT_FIELD(0x12c, 16, 3) -+#define NANDC_CPYBK_ADDR_EXT REG_BIT_FIELD(0x12c, 0, 16) -+#define NANDC_CPYBK_ADDR REG_BIT_FIELD(0x130, 0, 32) -+ -+#define NANDC_ERASE_ADDR_CS REG_BIT_FIELD(0x134, 16, 3) -+#define NANDC_ERASE_ADDR_EXT REG_BIT_FIELD(0x134, 0, 16) -+#define NANDC_ERASE_ADDR REG_BIT_FIELD(0x138, 0, 32) -+ -+#define NANDC_INV_READ_ADDR_CS REG_BIT_FIELD(0x13c, 16, 3) -+#define NANDC_INV_READ_ADDR_EXT REG_BIT_FIELD(0x13c, 0, 16) -+#define NANDC_INV_READ_ADDR REG_BIT_FIELD(0x140, 0, 32) -+ -+#define NANDC_INIT_STAT REG_BIT_FIELD(0x144, 0, 32) -+#define NANDC_INIT_ONFI_DONE REG_BIT_FIELD(0x144, 31, 1) -+#define NANDC_INIT_DEVID_DONE REG_BIT_FIELD(0x144, 30, 1) -+#define NANDC_INIT_SUCCESS REG_BIT_FIELD(0x144, 29, 1) -+#define NANDC_INIT_FAIL REG_BIT_FIELD(0x144, 28, 1) -+#define NANDC_INIT_BLANK REG_BIT_FIELD(0x144, 27, 1) -+#define NANDC_INIT_TIMEOUT REG_BIT_FIELD(0x144, 26, 1) -+#define NANDC_INIT_UNC_ERROR REG_BIT_FIELD(0x144, 25, 1) -+#define NANDC_INIT_CORR_ERROR REG_BIT_FIELD(0x144, 24, 1) -+#define NANDC_INIT_PARAM_RDY REG_BIT_FIELD(0x144, 23, 1) -+#define NANDC_INIT_AUTH_FAIL REG_BIT_FIELD(0x144, 22, 1) -+ -+#define NANDC_ONFI_STAT REG_BIT_FIELD(0x148, 0, 32) -+#define NANDC_ONFI_DEBUG REG_BIT_FIELD(0x148, 28, 4) -+#define NANDC_ONFI_PRESENT REG_BIT_FIELD(0x148, 27, 1) -+#define NANDC_ONFI_BADID_PG2 REG_BIT_FIELD(0x148, 5, 1) -+#define NANDC_ONFI_BADID_PG1 REG_BIT_FIELD(0x148, 4, 1) -+#define NANDC_ONFI_BADID_PG0 REG_BIT_FIELD(0x148, 3, 1) -+#define NANDC_ONFI_BADCRC_PG2 REG_BIT_FIELD(0x148, 2, 1) -+#define NANDC_ONFI_BADCRC_PG1 REG_BIT_FIELD(0x148, 1, 1) -+#define NANDC_ONFI_BADCRC_PG0 REG_BIT_FIELD(0x148, 0, 1) -+ -+#define NANDC_ONFI_DEBUG_DATA REG_BIT_FIELD(0x14c, 0, 32) -+ -+#define NANDC_SEMAPHORE REG_BIT_FIELD(0x150, 0, 8) -+ -+#define NANDC_DEVID_BYTE(b) REG_BIT_FIELD(0x194+((b)&0x4), \ -+ 24-(((b)&3)<<3), 8) -+ -+#define NANDC_LL_RDDATA REG_BIT_FIELD(0x19c, 0, 16) -+ -+#define NANDC_INT_N_REG(n) REG_BIT_FIELD(0xf00|((n)<<2), 0, 1) -+#define NANDC_INT_DIREC_READ_MISS REG_BIT_FIELD(0xf00, 0, 1) -+#define NANDC_INT_ERASE_DONE REG_BIT_FIELD(0xf04, 0, 1) -+#define NANDC_INT_CPYBK_DONE REG_BIT_FIELD(0xf08, 0, 1) -+#define NANDC_INT_PROGRAM_DONE REG_BIT_FIELD(0xf0c, 0, 1) -+#define NANDC_INT_CONTROLLER_RDY REG_BIT_FIELD(0xf10, 0, 1) -+#define NANDC_INT_RDBSY_RDY REG_BIT_FIELD(0xf14, 0, 1) -+#define NANDC_INT_ECC_UNCORRECTABLE REG_BIT_FIELD(0xf18, 0, 1) -+#define NANDC_INT_ECC_CORRECTABLE REG_BIT_FIELD(0xf1c, 0, 1) -+ -+/* -+ * Following registers are treated as contigous IO memory, offset is from -+ * <reg_base>, and the data is in big-endian byte order -+ */ -+#define NANDC_SPARE_AREA_READ_OFF 0x200 -+#define NANDC_SPARE_AREA_WRITE_OFF 0x280 -+#define NANDC_CACHE_OFF 0x400 -+#define NANDC_CACHE_SIZE (128*4) -+ -+struct bcmnand_areg_field { -+ unsigned int reg; -+ unsigned int pos; -+ unsigned int width; -+}; -+ -+/* -+ * Following are IDM (a.k.a. Slave Wrapper) registers are off <idm_base>: -+ */ -+#define IDMREG_BIT_FIELD(r, p, w) ((struct bcmnand_areg_field){(r), (p), (w)}) -+ -+#define NANDC_IDM_AXI_BIG_ENDIAN IDMREG_BIT_FIELD(0x408, 28, 1) -+#define NANDC_IDM_APB_LITTLE_ENDIAN IDMREG_BIT_FIELD(0x408, 24, 1) -+#define NANDC_IDM_TM IDMREG_BIT_FIELD(0x408, 16, 5) -+#define NANDC_IDM_IRQ_CORRECABLE_EN IDMREG_BIT_FIELD(0x408, 9, 1) -+#define NANDC_IDM_IRQ_UNCORRECABLE_EN IDMREG_BIT_FIELD(0x408, 8, 1) -+#define NANDC_IDM_IRQ_RDYBSY_RDY_EN IDMREG_BIT_FIELD(0x408, 7, 1) -+#define NANDC_IDM_IRQ_CONTROLLER_RDY_EN IDMREG_BIT_FIELD(0x408, 6, 1) -+#define NANDC_IDM_IRQ_PRPOGRAM_COMP_EN IDMREG_BIT_FIELD(0x408, 5, 1) -+#define NANDC_IDM_IRQ_COPYBK_COMP_EN IDMREG_BIT_FIELD(0x408, 4, 1) -+#define NANDC_IDM_IRQ_ERASE_COMP_EN IDMREG_BIT_FIELD(0x408, 3, 1) -+#define NANDC_IDM_IRQ_READ_MISS_EN IDMREG_BIT_FIELD(0x408, 2, 1) -+#define NANDC_IDM_IRQ_N_EN(n) IDMREG_BIT_FIELD(0x408, 2+(n), 1) -+ -+#define NANDC_IDM_CLOCK_EN IDMREG_BIT_FIELD(0x408, 0, 1) -+ -+#define NANDC_IDM_IO_ECC_CORR IDMREG_BIT_FIELD(0x500, 3, 1) -+#define NANDC_IDM_IO_ECC_UNCORR IDMREG_BIT_FIELD(0x500, 2, 1) -+#define NANDC_IDM_IO_RDYBSY IDMREG_BIT_FIELD(0x500, 1, 1) -+#define NANDC_IDM_IO_CTRL_RDY IDMREG_BIT_FIELD(0x500, 0, 1) -+ -+#define NANDC_IDM_RESET IDMREG_BIT_FIELD(0x800, 0, 1) -+ /* Remaining IDM registers do not seem to be useful, skipped */ -+ -+/* -+ * NAND Controller has its own command opcodes -+ * different from opcodes sent to the actual flash chip -+ */ -+#define NANDC_CMD_OPCODE_NULL 0 -+#define NANDC_CMD_OPCODE_PAGE_READ 1 -+#define NANDC_CMD_OPCODE_SPARE_READ 2 -+#define NANDC_CMD_OPCODE_STATUS_READ 3 -+#define NANDC_CMD_OPCODE_PAGE_PROG 4 -+#define NANDC_CMD_OPCODE_SPARE_PROG 5 -+#define NANDC_CMD_OPCODE_DEVID_READ 7 -+#define NANDC_CMD_OPCODE_BLOCK_ERASE 8 -+#define NANDC_CMD_OPCODE_FLASH_RESET 9 -+ -+/* -+ * NAND Controller hardware ECC data size -+ * -+ * The following table contains the number of bytes needed for -+ * each of the ECC levels, per "sector", which is either 512 or 1024 bytes. -+ * The actual layout is as follows: -+ * The entire spare area is equally divided into as many sections as there -+ * are sectors per page, and the ECC data is located at the end of each -+ * of these sections. -+ * For example, given a 2K per page and 64 bytes spare device, configured for -+ * sector size 1k and ECC level of 4, the spare area will be divided into 2 -+ * sections 32 bytes each, and the last 14 bytes of 32 in each section will -+ * be filled with ECC data. -+ * Note: the name of the algorythm and the number of error bits it can correct -+ * is of no consequence to this driver, therefore omitted. -+ */ -+struct bcmnand_ecc_size_s { -+ unsigned char sector_size_shift; -+ unsigned char ecc_level; -+ unsigned char ecc_bytes_per_sec; -+ unsigned char reserved; -+}; -+ -+static const struct bcmnand_ecc_size_s bcmnand_ecc_sizes[] = { -+ { 9, 0, 0 }, -+ { 10, 0, 0 }, -+ { 9, 1, 2 }, -+ { 10, 1, 4 }, -+ { 9, 2, 4 }, -+ { 10, 2, 7 }, -+ { 9, 3, 6 }, -+ { 10, 3, 11 }, -+ { 9, 4, 7 }, -+ { 10, 4, 14 }, -+ { 9, 5, 9 }, -+ { 10, 5, 18 }, -+ { 9, 6, 11 }, -+ { 10, 6, 21 }, -+ { 9, 7, 13 }, -+ { 10, 7, 25 }, -+ { 9, 8, 14 }, -+ { 10, 8, 28 }, -+ -+ { 9, 9, 16 }, -+ { 9, 10, 18 }, -+ { 9, 11, 20 }, -+ { 9, 12, 21 }, -+ -+ { 10, 9, 32 }, -+ { 10, 10, 35 }, -+ { 10, 11, 39 }, -+ { 10, 12, 42 }, -+}; -+ -+/* -+ * Populate the various fields that depend on how -+ * the hardware ECC data is located in the spare area -+ * -+ * For this controiller, it is easier to fill-in these -+ * structures at run time. -+ * -+ * The bad-block marker is assumed to occupy one byte -+ * at chip->badblockpos, which must be in the first -+ * sector of the spare area, namely it is either -+ * at offset 0 or 5. -+ * Some chips use both for manufacturer's bad block -+ * markers, but we ingore that issue here, and assume only -+ * one byte is used as bad-block marker always. -+ */ -+static int bcmnand_hw_ecc_layout(struct bcmnand_ctrl *ctrl) -+{ -+ struct nand_ecclayout *layout; -+ struct device *dev = &ctrl->core->dev; -+ unsigned int i, j, k; -+ unsigned int ecc_per_sec, oob_per_sec; -+ unsigned int bbm_pos = ctrl->nand.badblockpos; -+ -+ /* Caclculate spare area per sector size */ -+ oob_per_sec = ctrl->mtd.oobsize >> ctrl->sec_per_page_shift; -+ -+ /* Try to calculate the amount of ECC bytes per sector with a formula */ -+ if (ctrl->sector_size_shift == 9) -+ ecc_per_sec = ((ctrl->ecc_level * 14) + 7) >> 3; -+ else if (ctrl->sector_size_shift == 10) -+ ecc_per_sec = ((ctrl->ecc_level * 14) + 3) >> 2; -+ else -+ ecc_per_sec = oob_per_sec + 1; /* cause an error if not in table */ -+ -+ /* Now find out the answer according to the table */ -+ for (i = 0; i < ARRAY_SIZE(bcmnand_ecc_sizes); i++) { -+ if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level && -+ bcmnand_ecc_sizes[i].sector_size_shift == -+ ctrl->sector_size_shift) { -+ break; -+ } -+ } -+ -+ /* Table match overrides formula */ -+ if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level && -+ bcmnand_ecc_sizes[i].sector_size_shift == ctrl->sector_size_shift) -+ ecc_per_sec = bcmnand_ecc_sizes[i].ecc_bytes_per_sec; -+ -+ /* Return an error if calculated ECC leaves no room for OOB */ -+ if ((ctrl->sec_per_page_shift != 0 && ecc_per_sec >= oob_per_sec) || -+ (ctrl->sec_per_page_shift == 0 && ecc_per_sec >= (oob_per_sec - 1))) { -+ dev_err(dev, "ECC level %d too high, leaves no room for OOB data\n", -+ ctrl->ecc_level); -+ return -EINVAL; -+ } -+ -+ /* Fill in the needed fields */ -+ ctrl->nand.ecc.size = ctrl->mtd.writesize >> ctrl->sec_per_page_shift; -+ ctrl->nand.ecc.bytes = ecc_per_sec; -+ ctrl->nand.ecc.steps = 1 << ctrl->sec_per_page_shift; -+ ctrl->nand.ecc.total = ecc_per_sec << ctrl->sec_per_page_shift; -+ ctrl->nand.ecc.strength = ctrl->ecc_level; -+ -+ /* Build an ecc layout data structure */ -+ layout = &ctrl->ecclayout; -+ memset(layout, 0, sizeof(*layout)); -+ -+ /* Total number of bytes used by HW ECC */ -+ layout->eccbytes = ecc_per_sec << ctrl->sec_per_page_shift; -+ -+ /* Location for each of the HW ECC bytes */ -+ for (i = j = 0, k = 1; -+ i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes; -+ i++, j++) { -+ /* switch sector # */ -+ if (j == ecc_per_sec) { -+ j = 0; -+ k++; -+ } -+ /* save position of each HW-generated ECC byte */ -+ layout->eccpos[i] = (oob_per_sec * k) - ecc_per_sec + j; -+ -+ /* Check that HW ECC does not overlap bad-block marker */ -+ if (bbm_pos == layout->eccpos[i]) { -+ dev_err(dev, "ECC level %d too high, HW ECC collides with bad-block marker position\n", -+ ctrl->ecc_level); -+ return -EINVAL; -+ } -+ } -+ -+ /* Location of all user-available OOB byte-ranges */ -+ for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++) { -+ struct nand_oobfree *oobfree = &layout->oobfree[i]; -+ -+ if (i >= (1 << ctrl->sec_per_page_shift)) -+ break; -+ oobfree->offset = oob_per_sec * i; -+ oobfree->length = oob_per_sec - ecc_per_sec; -+ -+ /* Bad-block marker must be in the first sector spare area */ -+ if (WARN_ON(bbm_pos >= (oobfree->offset + oobfree->length))) -+ return -EINVAL; -+ -+ if (i != 0) -+ continue; -+ -+ /* Remove bad-block marker from available byte range */ -+ if (bbm_pos == oobfree->offset) { -+ oobfree->offset += 1; -+ oobfree->length -= 1; -+ } else if (bbm_pos == (oobfree->offset + oobfree->length - 1)) { -+ oobfree->length -= 1; -+ } else { -+ layout->oobfree[i + 1].offset = bbm_pos + 1; -+ layout->oobfree[i + 1].length = -+ oobfree->length - bbm_pos - 1; -+ oobfree->length = bbm_pos; -+ i++; -+ } -+ } -+ -+ layout->oobavail = ((oob_per_sec - ecc_per_sec) -+ << ctrl->sec_per_page_shift) - 1; -+ -+ ctrl->mtd.oobavail = layout->oobavail; -+ ctrl->nand.ecc.layout = layout; -+ -+ /* Output layout for debugging */ -+ dev_dbg(dev, "Spare area=%d eccbytes %d, ecc bytes located at:\n", -+ ctrl->mtd.oobsize, layout->eccbytes); -+ for (i = j = 0; -+ i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes; i++) -+ pr_debug(" %d", layout->eccpos[i]); -+ pr_debug("\n"); -+ -+ dev_dbg(dev, "Available %d bytes at (off,len):\n", layout->oobavail); -+ for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++) -+ pr_debug("(%d,%d) ", layout->oobfree[i].offset, -+ layout->oobfree[i].length); -+ pr_debug("\n"); -+ -+ return 0; -+} -+ -+/* -+ * Register bit-field manipulation routines -+ */ -+ -+static inline unsigned int bcmnand_reg_read(struct bcmnand_ctrl *ctrl, -+ struct bcmnand_reg_field rbf) -+{ -+ u32 val; -+ -+ val = bcma_read32(ctrl->core, rbf.reg); -+ val >>= rbf.pos; -+ val &= (1 << rbf.width) - 1; -+ -+ return val; -+} -+ -+static inline void bcmnand_reg_write(struct bcmnand_ctrl *ctrl, -+ struct bcmnand_reg_field rbf, -+ unsigned newval) -+{ -+ u32 val, msk; -+ -+ msk = (1 << rbf.width) - 1; -+ msk <<= rbf.pos; -+ newval <<= rbf.pos; -+ newval &= msk; -+ -+ val = bcma_read32(ctrl->core, rbf.reg); -+ val &= ~msk; -+ val |= newval; -+ bcma_write32(ctrl->core, rbf.reg, val); -+} -+ -+static inline unsigned int bcmnand_reg_aread(struct bcmnand_ctrl *ctrl, -+ struct bcmnand_areg_field rbf) -+{ -+ u32 val; -+ -+ val = bcma_aread32(ctrl->core, rbf.reg); -+ val >>= rbf.pos; -+ val &= (1 << rbf.width) - 1; -+ -+ return val; -+} -+ -+static inline void bcmnand_reg_awrite(struct bcmnand_ctrl *ctrl, -+ struct bcmnand_areg_field rbf, -+ unsigned int newval) -+{ -+ u32 val, msk; -+ -+ msk = (1 << rbf.width) - 1; -+ msk <<= rbf.pos; -+ newval <<= rbf.pos; -+ newval &= msk; -+ -+ val = bcma_aread32(ctrl->core, rbf.reg); -+ val &= ~msk; -+ val |= newval; -+ bcma_awrite32(ctrl->core, rbf.reg, val); -+} -+ -+/* -+ * NAND Interface - dev_ready -+ * -+ * Return 1 iff device is ready, 0 otherwise -+ */ -+static int bcmnand_dev_ready(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ -+ return bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY); -+} -+ -+/* -+ * Interrupt service routines -+ */ -+static irqreturn_t bcmnand_isr(int irq, void *dev_id) -+{ -+ struct bcmnand_ctrl *ctrl = dev_id; -+ int irq_off; -+ -+ irq_off = irq - ctrl->core->irq; -+ WARN_ON(irq_off < 0 || irq_off >= NANDC_IRQ_NUM); -+ -+ if (!bcmnand_reg_read(ctrl, NANDC_INT_N_REG(irq_off))) -+ return IRQ_NONE; -+ -+ /* Acknowledge interrupt */ -+ bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1); -+ -+ /* Wake up task */ -+ complete(&ctrl->op_completion); -+ -+ return IRQ_HANDLED; -+} -+ -+static int bcmnand_wait_interrupt(struct bcmnand_ctrl *ctrl, -+ unsigned int irq_off, -+ unsigned int timeout_usec) -+{ -+ long timeout_jiffies; -+ int ret = 0; -+ -+ reinit_completion(&ctrl->op_completion); -+ -+ /* Acknowledge interrupt */ -+ bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1); -+ -+ /* Enable IRQ to wait on */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 1); -+ -+ timeout_jiffies = 1 + usecs_to_jiffies(timeout_usec); -+ -+ if (irq_off != NANDC_IRQ_CONTROLLER_RDY || -+ 0 == bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY)) { -+ -+ timeout_jiffies = wait_for_completion_timeout( -+ &ctrl->op_completion, timeout_jiffies); -+ -+ if (timeout_jiffies < 0) -+ ret = timeout_jiffies; -+ if (timeout_jiffies == 0) -+ ret = -ETIME; -+ } -+ -+ /* Disable IRQ, we're done waiting */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0); -+ -+ if (bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY)) -+ ret = 0; -+ -+ return ret; -+} -+ -+/* -+ * wait for command completion -+ */ -+static int bcmnand_wait_cmd(struct bcmnand_ctrl *ctrl, unsigned int timeout_usec) -+{ -+ unsigned int retries; -+ -+ if (bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY)) -+ return 0; -+ -+ /* If the timeout is long, wait for interrupt */ -+ if (timeout_usec >= jiffies_to_usecs(1) >> 4) -+ return bcmnand_wait_interrupt( -+ ctrl, NANDC_IRQ_CONTROLLER_RDY, timeout_usec); -+ -+ /* Wait for completion of the prior command */ -+ retries = (timeout_usec >> 3) + 1; -+ -+ while (retries-- && -+ 0 == bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY)) { -+ cpu_relax(); -+ udelay(6); -+ } -+ -+ if (retries == 0) -+ return -ETIME; -+ -+ return 0; -+} -+ -+ -+/* -+ * NAND Interface - waitfunc -+ */ -+static int bcmnand_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) -+{ -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ unsigned int to; -+ int ret; -+ -+ /* figure out timeout based on what command is on */ -+ switch (ctrl->last_cmd) { -+ default: -+ case NAND_CMD_ERASE1: -+ case NAND_CMD_ERASE2: -+ to = 1 << 16; -+ break; -+ case NAND_CMD_STATUS: -+ case NAND_CMD_RESET: -+ to = 256; -+ break; -+ case NAND_CMD_READID: -+ to = 1024; -+ break; -+ case NAND_CMD_READ1: -+ case NAND_CMD_READ0: -+ to = 2048; -+ break; -+ case NAND_CMD_PAGEPROG: -+ to = 4096; -+ break; -+ case NAND_CMD_READOOB: -+ to = 512; -+ break; -+ } -+ -+ /* deliver deferred error code if any */ -+ ret = ctrl->cmd_ret; -+ if (ret < 0) -+ ctrl->cmd_ret = 0; -+ else -+ ret = bcmnand_wait_cmd(ctrl, to); -+ -+ /* Timeout */ -+ if (ret < 0) -+ return NAND_STATUS_FAIL; -+ -+ ret = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS); -+ -+ return ret; -+} -+ -+/* -+ * NAND Interface - read_oob -+ */ -+static int bcmnand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, -+ int page) -+{ -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ unsigned int n = ctrl->chip_num; -+ void __iomem *ctrl_spare; -+ unsigned int spare_per_sec, sector; -+ u64 nand_addr; -+ -+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF; -+ -+ /* Set the page address for the following commands */ -+ nand_addr = ((u64)page << chip->page_shift); -+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32); -+ -+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift; -+ -+ /* Disable ECC validation for spare area reads */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), 0); -+ -+ /* Loop all sectors in page */ -+ for (sector = 0; sector < (1<<ctrl->sec_per_page_shift); sector++) { -+ unsigned int col; -+ -+ col = (sector << ctrl->sector_size_shift); -+ -+ /* Issue command to read partial page */ -+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col); -+ -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_SPARE_READ); -+ -+ /* Wait for the command to complete */ -+ if (bcmnand_wait_cmd(ctrl, (sector == 0) ? 10000 : 100)) -+ return -EIO; -+ -+ if (!bcmnand_reg_read(ctrl, NANDC_INT_STAT_SPARE_VALID)) -+ return -EIO; -+ -+ /* Set controller to Little Endian mode for copying */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1); -+ -+ memcpy(chip->oob_poi + sector * spare_per_sec, -+ ctrl_spare, spare_per_sec); -+ -+ /* Return to Big Endian mode for commands etc */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0); -+ } -+ -+ return 0; -+} -+ -+/* -+ * NAND Interface - write_oob -+ */ -+static int bcmnand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, -+ int page) -+{ -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ unsigned int n = ctrl->chip_num; -+ void __iomem *ctrl_spare; -+ unsigned int spare_per_sec, sector, num_sec; -+ u64 nand_addr; -+ int to, status = 0; -+ -+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF; -+ -+ /* Disable ECC generation for spare area writes */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), 0); -+ -+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift; -+ -+ /* Set the page address for the following commands */ -+ nand_addr = ((u64)page << chip->page_shift); -+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32); -+ -+ /* Must allow partial programming to change spare area only */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 1); -+ -+ num_sec = 1 << ctrl->sec_per_page_shift; -+ /* Loop all sectors in page */ -+ for (sector = 0; sector < num_sec; sector++) { -+ unsigned int col; -+ -+ /* Spare area accessed by the data sector offset */ -+ col = (sector << ctrl->sector_size_shift); -+ -+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col); -+ -+ /* Set controller to Little Endian mode for copying */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1); -+ -+ memcpy(ctrl_spare, chip->oob_poi + sector * spare_per_sec, -+ spare_per_sec); -+ -+ /* Return to Big Endian mode for commands etc */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0); -+ -+ /* Push spare bytes into internal buffer, last goes to flash */ -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_SPARE_PROG); -+ -+ if (sector == (num_sec - 1)) -+ to = 1 << 16; -+ else -+ to = 1 << 10; -+ -+ if (bcmnand_wait_cmd(ctrl, to)) -+ return -EIO; -+ } -+ -+ /* Restore partial programming inhibition */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 0); -+ -+ status = bcmnand_waitfunc(mtd, chip); -+ return status & NAND_STATUS_FAIL ? -EIO : 0; -+} -+ -+/* -+ * verify that a buffer is all erased -+ */ -+static bool bcmnand_buf_erased(const void *buf, unsigned int len) -+{ -+ unsigned int i; -+ const u32 *p = buf; -+ -+ for (i = 0; i < (len >> 2); i++) { -+ if (p[i] != 0xffffffff) -+ return false; -+ } -+ return true; -+} -+ -+/* -+ * read a page, with or without ECC checking -+ */ -+static int bcmnand_read_page_do(struct mtd_info *mtd, struct nand_chip *chip, -+ uint8_t *buf, int page, bool ecc) -+{ -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ unsigned int n = ctrl->chip_num; -+ void __iomem *ctrl_cache; -+ void __iomem *ctrl_spare; -+ unsigned int data_bytes; -+ unsigned int spare_per_sec; -+ unsigned int sector, to = 1 << 16; -+ u32 err_soft_reg, err_hard_reg; -+ unsigned int hard_err_count = 0; -+ int ret; -+ u64 nand_addr; -+ -+ ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF; -+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF; -+ -+ /* Reset ECC error stats */ -+ err_hard_reg = bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT); -+ err_soft_reg = bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT); -+ -+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift; -+ -+ /* Set the page address for the following commands */ -+ nand_addr = ((u64)page << chip->page_shift); -+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32); -+ -+ /* Enable ECC validation for ecc page reads */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), ecc); -+ -+ /* Loop all sectors in page */ -+ for (sector = 0; sector < (1 << ctrl->sec_per_page_shift); sector++) { -+ data_bytes = 0; -+ -+ /* Copy partial sectors sized by cache reg */ -+ while (data_bytes < (1<<ctrl->sector_size_shift)) { -+ unsigned int col; -+ -+ col = data_bytes + (sector << ctrl->sector_size_shift); -+ -+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, -+ nand_addr + col); -+ -+ /* Issue command to read partial page */ -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_PAGE_READ); -+ -+ /* Wait for the command to complete */ -+ ret = bcmnand_wait_cmd(ctrl, to); -+ if (ret < 0) -+ return ret; -+ -+ /* Set controller to Little Endian mode for copying */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1); -+ -+ if (data_bytes == 0) { -+ memcpy(chip->oob_poi + sector * spare_per_sec, -+ ctrl_spare, spare_per_sec); -+ } -+ -+ memcpy(buf + col, ctrl_cache, NANDC_CACHE_SIZE); -+ data_bytes += NANDC_CACHE_SIZE; -+ -+ /* Return to Big Endian mode for commands etc */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0); -+ -+ /* Next iterations should go fast */ -+ to = 1 << 10; -+ -+ /* capture hard errors for each partial */ -+ if (err_hard_reg != bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT)) { -+ int era = bcmnand_reg_read(ctrl, NANDC_INT_STAT_ERASED); -+ -+ if (!era && -+ !bcmnand_buf_erased(buf + col, NANDC_CACHE_SIZE)) -+ hard_err_count++; -+ -+ err_hard_reg = bcmnand_reg_read(ctrl, -+ NANDC_UNCORR_ERR_COUNT); -+ } -+ } -+ } -+ -+ if (!ecc) -+ return 0; -+ -+ /* Report hard ECC errors */ -+ if (hard_err_count) -+ mtd->ecc_stats.failed++; -+ -+ /* Get ECC soft error stats */ -+ mtd->ecc_stats.corrected += err_soft_reg - -+ bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT); -+ -+ return 0; -+} -+ -+/* -+ * NAND Interface - read_page_ecc -+ */ -+static int bcmnand_read_page_ecc(struct mtd_info *mtd, struct nand_chip *chip, -+ uint8_t *buf, int oob_required, int page) -+{ -+ return bcmnand_read_page_do(mtd, chip, buf, page, true); -+} -+ -+/* -+ * NAND Interface - read_page_raw -+ */ -+static int bcmnand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, -+ uint8_t *buf, int oob_required, int page) -+{ -+ return bcmnand_read_page_do(mtd, chip, buf, page, true); -+} -+ -+/* -+ * do page write, with or without ECC generation enabled -+ */ -+static int bcmnand_write_page_do(struct mtd_info *mtd, struct nand_chip *chip, -+ const uint8_t *buf, bool ecc) -+{ -+ struct bcmnand_ctrl *ctrl = chip->priv; -+ unsigned int n = ctrl->chip_num; -+ void __iomem *ctrl_cache; -+ void __iomem *ctrl_spare; -+ unsigned int spare_per_sec, sector, num_sec; -+ unsigned int data_bytes, spare_bytes; -+ int i, to; -+ uint8_t *tmp_poi; -+ u32 nand_addr; -+ -+ ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF; -+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF; -+ -+ /* Get start-of-page address */ -+ nand_addr = bcmnand_reg_read(ctrl, NANDC_CMD_ADDRESS); -+ -+ tmp_poi = kmalloc(mtd->oobsize, GFP_KERNEL); -+ if (!tmp_poi) -+ return -ENOMEM; -+ -+ /* Retreive pre-existing OOB values */ -+ memcpy(tmp_poi, chip->oob_poi, mtd->oobsize); -+ ctrl->cmd_ret = bcmnand_read_oob(mtd, chip, -+ nand_addr >> chip->page_shift); -+ if (ctrl->cmd_ret < 0) { -+ kfree(tmp_poi); -+ return ctrl->cmd_ret; -+ } -+ -+ /* Apply new OOB data bytes just like they would end up on the chip */ -+ for (i = 0; i < mtd->oobsize; i++) -+ chip->oob_poi[i] &= tmp_poi[i]; -+ kfree(tmp_poi); -+ -+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift; -+ -+ /* Enable ECC generation for ecc page write, if requested */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), ecc); -+ -+ spare_bytes = 0; -+ num_sec = 1 << ctrl->sec_per_page_shift; -+ -+ /* Loop all sectors in page */ -+ for (sector = 0; sector < num_sec; sector++) { -+ data_bytes = 0; -+ -+ /* Copy partial sectors sized by cache reg */ -+ while (data_bytes < (1<<ctrl->sector_size_shift)) { -+ unsigned int col; -+ -+ col = data_bytes + -+ (sector << ctrl->sector_size_shift); -+ -+ /* Set address of 512-byte sub-page */ -+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, -+ nand_addr + col); -+ -+ /* Set controller to Little Endian mode for copying */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, -+ 1); -+ -+ /* Set spare area is written at each sector start */ -+ if (data_bytes == 0) { -+ memcpy(ctrl_spare, -+ chip->oob_poi + spare_bytes, -+ spare_per_sec); -+ spare_bytes += spare_per_sec; -+ } -+ -+ /* Copy sub-page data */ -+ memcpy(ctrl_cache, buf + col, NANDC_CACHE_SIZE); -+ data_bytes += NANDC_CACHE_SIZE; -+ -+ /* Return to Big Endian mode for commands etc */ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0); -+ -+ /* Push data into internal cache */ -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_PAGE_PROG); -+ -+ /* Wait for the command to complete */ -+ if (sector == (num_sec - 1)) -+ to = 1 << 16; -+ else -+ to = 1 << 10; -+ ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to); -+ if (ctrl->cmd_ret < 0) -+ return ctrl->cmd_ret; -+ } -+ } -+ return 0; -+} -+ -+/* -+ * NAND Interface = write_page_ecc -+ */ -+static int bcmnand_write_page_ecc(struct mtd_info *mtd, struct nand_chip *chip, -+ const uint8_t *buf, int oob_required) -+{ -+ return bcmnand_write_page_do(mtd, chip, buf, true); -+} -+ -+/* -+ * NAND Interface = write_page_raw -+ */ -+static int bcmnand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, -+ const uint8_t *buf, int oob_required) -+{ -+ return bcmnand_write_page_do(mtd, chip, buf, false); -+} -+ -+/* -+ * MTD Interface - read_byte -+ * -+ * This function emulates simple controllers behavior -+ * for just a few relevant commands -+ */ -+static uint8_t bcmnand_read_byte(struct mtd_info *mtd) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct bcmnand_ctrl *ctrl = nand->priv; -+ struct device *dev = &ctrl->core->dev; -+ uint8_t b = ~0; -+ -+ switch (ctrl->last_cmd) { -+ case NAND_CMD_READID: -+ if (ctrl->id_byte_index < 8) { -+ b = bcmnand_reg_read(ctrl, NANDC_DEVID_BYTE( -+ ctrl->id_byte_index)); -+ ctrl->id_byte_index++; -+ } -+ break; -+ case NAND_CMD_READOOB: -+ if (ctrl->oob_index < mtd->oobsize) -+ b = nand->oob_poi[ctrl->oob_index++]; -+ break; -+ case NAND_CMD_STATUS: -+ b = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS); -+ break; -+ default: -+ dev_err(dev, "got unkown command: 0x%x in read_byte\n", -+ ctrl->last_cmd); -+ } -+ return b; -+} -+ -+/* -+ * MTD Interface - read_word -+ * -+ * Can not be tested without x16 chip, but the SoC does not support x16 i/f. -+ */ -+static u16 bcmnand_read_word(struct mtd_info *mtd) -+{ -+ u16 w = ~0; -+ -+ w = bcmnand_read_byte(mtd); -+ barrier(); -+ w |= bcmnand_read_byte(mtd) << 8; -+ -+ return w; -+} -+ -+/* -+ * MTD Interface - select a chip from an array -+ */ -+static void bcmnand_select_chip(struct mtd_info *mtd, int chip) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct bcmnand_ctrl *ctrl = nand->priv; -+ -+ ctrl->chip_num = chip; -+ bcmnand_reg_write(ctrl, NANDC_CMD_CS_SEL, chip); -+} -+ -+/* -+ * NAND Interface - emulate low-level NAND commands -+ * -+ * Only a few low-level commands are really needed by generic NAND, -+ * and they do not call for CMD_LL operations the controller can support. -+ */ -+static void bcmnand_cmdfunc(struct mtd_info *mtd, unsigned int command, -+ int column, int page_addr) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct bcmnand_ctrl *ctrl = nand->priv; -+ struct device *dev = &ctrl->core->dev; -+ u64 nand_addr; -+ unsigned int to = 1; -+ -+ ctrl->last_cmd = command; -+ -+ /* Set address for some commands */ -+ switch (command) { -+ case NAND_CMD_ERASE1: -+ column = 0; -+ /*FALLTHROUGH*/ -+ case NAND_CMD_SEQIN: -+ case NAND_CMD_READ0: -+ case NAND_CMD_READ1: -+ WARN_ON(column >= mtd->writesize); -+ nand_addr = (u64) column | -+ ((u64)page_addr << nand->page_shift); -+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32); -+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr); -+ break; -+ case NAND_CMD_ERASE2: -+ case NAND_CMD_RESET: -+ case NAND_CMD_READID: -+ case NAND_CMD_READOOB: -+ case NAND_CMD_PAGEPROG: -+ default: -+ /* Do nothing, address not used */ -+ break; -+ } -+ -+ /* Issue appropriate command to controller */ -+ switch (command) { -+ case NAND_CMD_SEQIN: -+ /* Only need to load command address, done */ -+ return; -+ -+ case NAND_CMD_RESET: -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_FLASH_RESET); -+ to = 1 << 8; -+ break; -+ -+ case NAND_CMD_READID: -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_DEVID_READ); -+ ctrl->id_byte_index = 0; -+ to = 1 << 8; -+ break; -+ -+ case NAND_CMD_READ0: -+ case NAND_CMD_READ1: -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_PAGE_READ); -+ to = 1 << 15; -+ break; -+ case NAND_CMD_STATUS: -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_STATUS_READ); -+ to = 1 << 8; -+ break; -+ case NAND_CMD_ERASE1: -+ return; -+ -+ case NAND_CMD_ERASE2: -+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE, -+ NANDC_CMD_OPCODE_BLOCK_ERASE); -+ to = 1 << 18; -+ break; -+ -+ case NAND_CMD_PAGEPROG: -+ /* Cmd already set from write_page */ -+ return; -+ -+ case NAND_CMD_READOOB: -+ /* Emulate simple interface */ -+ bcmnand_read_oob(mtd, nand, page_addr); -+ ctrl->oob_index = 0; -+ return; -+ -+ default: -+ dev_err(dev, "got unkown command: 0x%x in cmdfunc\n", -+ ctrl->last_cmd); -+ } -+ -+ /* Wait for command to complete */ -+ ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to); -+ -+} -+ -+static int bcmnand_scan(struct mtd_info *mtd) -+{ -+ struct nand_chip *nand = mtd->priv; -+ struct bcmnand_ctrl *ctrl = nand->priv; -+ struct device *dev = &ctrl->core->dev; -+ bool sector_1k = false; -+ unsigned int chip_num = 0; -+ int ecc_level = 0; -+ int ret; -+ -+ ret = nand_scan_ident(mtd, NANDC_MAX_CHIPS, NULL); -+ if (ret) -+ return ret; -+ -+ /* Get configuration from first chip */ -+ sector_1k = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_SECTOR_1K(0)); -+ ecc_level = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(0)); -+ mtd->writesize_shift = nand->page_shift; -+ -+ ctrl->ecc_level = ecc_level; -+ ctrl->sector_size_shift = sector_1k ? 10 : 9; -+ -+ /* Configure spare area, tweak as needed */ -+ do { -+ ctrl->sec_per_page_shift = -+ mtd->writesize_shift - ctrl->sector_size_shift; -+ -+ /* will return -EINVAL if OOB space exhausted */ -+ ret = bcmnand_hw_ecc_layout(ctrl); -+ -+ /* First try to bump sector size to 1k, then decrease level */ -+ if (ret && nand->page_shift > 9 && ctrl->sector_size_shift < 10) -+ ctrl->sector_size_shift = 10; -+ else if (ret) -+ ctrl->ecc_level--; -+ -+ } while (ret && ctrl->ecc_level > 0); -+ -+ if (WARN_ON(ctrl->ecc_level == 0)) -+ return -ENOENT; -+ -+ if ((ctrl->sector_size_shift > 9) != (sector_1k == 1)) { -+ dev_info(dev, "sector size adjusted to 1k\n"); -+ sector_1k = 1; -+ } -+ -+ if (ecc_level != ctrl->ecc_level) { -+ dev_info(dev, "ECC level adjusted from %u to %u\n", -+ ecc_level, ctrl->ecc_level); -+ ecc_level = ctrl->ecc_level; -+ } -+ -+ /* handle the hardware chip config registers */ -+ for (chip_num = 0; chip_num < nand->numchips; chip_num++) { -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_SECTOR_1K(chip_num), -+ sector_1k); -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip_num), -+ ecc_level); -+ -+ /* Large pages: no partial page programming */ -+ if (mtd->writesize > 512) { -+ bcmnand_reg_write(ctrl, -+ NANDC_ACC_CTRL_PGM_RDIN(chip_num), 0); -+ bcmnand_reg_write(ctrl, -+ NANDC_ACC_CTRL_PGM_PARTIAL(chip_num), 0); -+ } -+ -+ /* Do not raise ECC error when reading erased pages */ -+ /* This bit has only partial effect, driver needs to help */ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ERA_ECC_ERR(chip_num), -+ 0); -+ -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PG_HIT(chip_num), 0); -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PREFETCH(chip_num), 0); -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_MODE(chip_num), 0); -+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_LASTPG(chip_num), -+ 0); -+ -+ /* TBD: consolidate or at least verify the s/w and h/w geometries agree */ -+ } -+ -+ /* Allow writing on device */ -+ if (!(nand->options & NAND_ROM)) -+ bcmnand_reg_write(ctrl, NANDC_CS_NAND_WP, 0); -+ -+ dev_dbg(dev, "layout.oobavail=%d\n", nand->ecc.layout->oobavail); -+ -+ ret = nand_scan_tail(mtd); -+ -+ if (nand->badblockbits == 0) -+ nand->badblockbits = 8; -+ if (WARN_ON((1 << nand->page_shift) != mtd->writesize)) -+ return -EIO; -+ -+ /* Spit out some key chip parameters as detected by nand_base */ -+ dev_dbg(dev, "erasesize=%d writesize=%d oobsize=%d page_shift=%d badblockpos=%d badblockbits=%d\n", -+ mtd->erasesize, mtd->writesize, mtd->oobsize, -+ nand->page_shift, nand->badblockpos, nand->badblockbits); -+ -+ return ret; -+} -+ -+/* -+ * main intiailization function -+ */ -+static int bcmnand_ctrl_init(struct bcmnand_ctrl *ctrl) -+{ -+ unsigned int chip; -+ struct nand_chip *nand; -+ struct mtd_info *mtd; -+ struct device *dev = &ctrl->core->dev; -+ int ret; -+ -+ /* Software variables init */ -+ nand = &ctrl->nand; -+ mtd = &ctrl->mtd; -+ -+ init_completion(&ctrl->op_completion); -+ -+ mtd->priv = nand; -+ mtd->owner = THIS_MODULE; -+ mtd->name = KBUILD_MODNAME; -+ -+ nand->priv = ctrl; -+ -+ nand->chip_delay = 5; /* not used */ -+ nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)~0L; -+ -+ if (bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_WIDTH(0))) -+ nand->options |= NAND_BUSWIDTH_16; -+ nand->options |= NAND_SKIP_BBTSCAN; /* Dont need BBTs */ -+ -+ nand->options |= NAND_NO_SUBPAGE_WRITE; /* Subpages unsupported */ -+ -+ nand->dev_ready = bcmnand_dev_ready; -+ nand->read_byte = bcmnand_read_byte; -+ nand->read_word = bcmnand_read_word; -+ nand->select_chip = bcmnand_select_chip; -+ nand->cmdfunc = bcmnand_cmdfunc; -+ nand->waitfunc = bcmnand_waitfunc; -+ -+ nand->ecc.mode = NAND_ECC_HW; -+ nand->ecc.read_page_raw = bcmnand_read_page_raw; -+ nand->ecc.write_page_raw = bcmnand_write_page_raw; -+ nand->ecc.read_page = bcmnand_read_page_ecc; -+ nand->ecc.write_page = bcmnand_write_page_ecc; -+ nand->ecc.read_oob = bcmnand_read_oob; -+ nand->ecc.write_oob = bcmnand_write_oob; -+ -+ /* Set AUTO_CNFIG bit - try to auto-detect chips */ -+ bcmnand_reg_write(ctrl, NANDC_CS_AUTO_CONFIG, 1); -+ -+ usleep_range(1000, 1500); -+ -+ /* Print out current chip config */ -+ for (chip = 0; chip < NANDC_MAX_CHIPS; chip++) { -+ dev_dbg(dev, "chip[%d]: size=%#x block=%#x page=%#x ecc_level=%#x\n", -+ chip, -+ bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_SIZE(chip)), -+ bcmnand_reg_read(ctrl, NANDC_CONFIG_BLK_SIZE(chip)), -+ bcmnand_reg_read(ctrl, NANDC_CONFIG_PAGE_SIZE(chip)), -+ bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip))); -+ } -+ -+ dev_dbg(dev, "Nand controller is reads=%d\n", -+ bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY)); -+ -+ ret = bcmnand_scan(mtd); -+ if (ret) { -+ dev_err(dev, "scanning the nand flash chip failed with %i\n", -+ ret); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int bcmnand_idm_init(struct bcmnand_ctrl *ctrl) -+{ -+ int irq_off; -+ unsigned int retries = 0x1000; -+ struct device *dev = &ctrl->core->dev; -+ -+ if (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) -+ dev_info(dev, "stuck in reset\n"); -+ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 1); -+ if (!bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) { -+ dev_err(dev, "reset of failed\n"); -+ return -EIO; -+ } -+ -+ while (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) { -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 0); -+ cpu_relax(); -+ usleep_range(100, 150); -+ if (!(retries--)) { -+ dev_err(dev, "did not came back from reset\n"); -+ return -ETIMEDOUT; -+ } -+ } -+ -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_CLOCK_EN, 1); -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0); -+ udelay(10); -+ -+ dev_info(dev, "NAND Controller rev %d.%02d\n", -+ bcmnand_reg_read(ctrl, NANDC_REV_MAJOR), -+ bcmnand_reg_read(ctrl, NANDC_REV_MINOR)); -+ -+ usleep_range(250, 350); -+ -+ /* Disable all IRQs */ -+ for (irq_off = 0; irq_off < NANDC_IRQ_NUM; irq_off++) -+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0); -+ -+ return 0; -+} -+ -+static const char * const part_probes[] = { "ofpart", "bcm47xxpart", NULL }; -+ -+/* -+ * Top-level init function -+ */ -+static int bcmnand_probe(struct bcma_device *core) -+{ -+ struct mtd_part_parser_data parser_data; -+ struct device *dev = &core->dev; -+ struct bcmnand_ctrl *ctrl; -+ int res, i, irq; -+ -+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); -+ if (!ctrl) -+ return -ENOMEM; -+ -+ bcma_set_drvdata(core, ctrl); -+ -+ ctrl->mtd.dev.parent = &core->dev; -+ ctrl->core = core; -+ -+ /* Acquire all interrupt lines */ -+ for (i = 0; i < NANDC_IRQ_NUM; i++) { -+ irq = bcma_core_irq(core, i); -+ if (!irq) { -+ dev_err(dev, "IRQ idx %i not available\n", i); -+ return -ENOENT; -+ } -+ res = devm_request_irq(dev, irq, bcmnand_isr, 0, -+ KBUILD_MODNAME, ctrl); -+ if (res < 0) { -+ dev_err(dev, "problem requesting irq: %i (idx: %i)\n", -+ irq, i); -+ return res; -+ } -+ } -+ -+ res = bcmnand_idm_init(ctrl); -+ if (res) -+ return res; -+ -+ res = bcmnand_ctrl_init(ctrl); -+ if (res) -+ return res; -+ -+ parser_data.of_node = dev->of_node; -+ res = mtd_device_parse_register(&ctrl->mtd, part_probes, &parser_data, NULL, 0); -+ if (res) { -+ dev_err(dev, "Failed to register MTD device: %d\n", res); -+ return res; -+ } -+ return 0; -+} -+ -+static void bcmnand_remove(struct bcma_device *core) -+{ -+ struct bcmnand_ctrl *ctrl = bcma_get_drvdata(core); -+ -+ mtd_device_unregister(&ctrl->mtd); -+} -+ -+static const struct bcma_device_id bcmnand_bcma_tbl[] = { -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_NAND, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORETABLE_END -+}; -+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); -+ -+static struct bcma_driver bcmnand_bcma_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = bcmnand_bcma_tbl, -+ .probe = bcmnand_probe, -+ .remove = bcmnand_remove, -+}; -+ -+static int __init bcmnand_init(void) -+{ -+ return bcma_driver_register(&bcmnand_bcma_driver); -+} -+ -+static void __exit bcmnand_exit(void) -+{ -+ bcma_driver_unregister(&bcmnand_bcma_driver); -+} -+ -+module_init(bcmnand_init) -+module_exit(bcmnand_exit) -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Hauke Mehrtens"); -+MODULE_DESCRIPTION("Northstar on-chip NAND Flash Controller driver"); diff --git a/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch deleted file mode 100644 index 08d4790e2f..0000000000 --- a/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Thu, 16 Oct 2014 20:52:16 +0200 -Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/ubi/attach.c | 5 +++++ - drivers/mtd/ubi/io.c | 4 ++++ - drivers/mtd/ubi/ubi.h | 1 + - 3 files changed, 10 insertions(+) - ---- a/drivers/mtd/ubi/attach.c -+++ b/drivers/mtd/ubi/attach.c -@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi - static struct ubi_ec_hdr *ech; - static struct ubi_vid_hdr *vidh; - -+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */ -+bool erase_all_next; -+ - /** - * add_to_list - add physical eraseblock to a list. - * @ai: attaching information -@@ -1418,6 +1421,8 @@ int ubi_attach(struct ubi_device *ubi, i - if (!ai) - return -ENOMEM; - -+ erase_all_next = false; -+ - #ifdef CONFIG_MTD_UBI_FASTMAP - /* On small flash devices we disable fastmap in any case. */ - if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) { ---- a/drivers/mtd/ubi/io.c -+++ b/drivers/mtd/ubi/io.c -@@ -753,6 +753,10 @@ int ubi_io_read_ec_hdr(struct ubi_device - } - - magic = be32_to_cpu(ec_hdr->magic); -+ if (magic == 0xdeadc0de) -+ erase_all_next = true; -+ if (erase_all_next) -+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF; - if (magic != UBI_EC_HDR_MAGIC) { - if (mtd_is_eccerr(read_err)) - return UBI_IO_BAD_HDR_EBADMSG; ---- a/drivers/mtd/ubi/ubi.h -+++ b/drivers/mtd/ubi/ubi.h -@@ -743,6 +743,7 @@ extern struct mutex ubi_devices_mutex; - extern struct blocking_notifier_head ubi_notifiers; - - /* attach.c */ -+extern bool erase_all_next; - int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum, - int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips); - struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai, diff --git a/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch b/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch deleted file mode 100644 index 6be75bb806..0000000000 --- a/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch +++ /dev/null @@ -1,63 +0,0 @@ -From f5d5afc0b1402aae0f6a2350e43241603dbaff1e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 13 May 2015 10:46:47 +0200 -Subject: [PATCH] bgmac: add support for the 3rd bus core (device) -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far we were supporting up to 2 cores but recent devices (e.g. Netgear -R8000) may use 3rd as well. Lower ones (1st, 2nd) are usually used for -some offloading then. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/net/ethernet/broadcom/bgmac.c | 28 +++++++++++++++++++++++----- - 1 file changed, 23 insertions(+), 5 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -1561,11 +1561,20 @@ static int bgmac_probe(struct bcma_devic - struct net_device *net_dev; - struct bgmac *bgmac; - struct ssb_sprom *sprom = &core->bus->sprom; -- u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; -+ u8 *mac; - int err; - -- /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ -- if (core->core_unit > 1) { -+ switch (core->core_unit) { -+ case 0: -+ mac = sprom->et0mac; -+ break; -+ case 1: -+ mac = sprom->et1mac; -+ break; -+ case 2: -+ mac = sprom->et2mac; -+ break; -+ default: - pr_err("Unsupported core_unit %d\n", core->core_unit); - return -ENOTSUPP; - } -@@ -1600,8 +1609,17 @@ static int bgmac_probe(struct bcma_devic - } - bgmac->cmn = core->bus->drv_gmac_cmn.core; - -- bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : -- sprom->et0phyaddr; -+ switch (core->core_unit) { -+ case 0: -+ bgmac->phyaddr = sprom->et0phyaddr; -+ break; -+ case 1: -+ bgmac->phyaddr = sprom->et1phyaddr; -+ break; -+ case 2: -+ bgmac->phyaddr = sprom->et2phyaddr; -+ break; -+ } - bgmac->phyaddr &= BGMAC_PHY_MASK; - if (bgmac->phyaddr == BGMAC_PHY_MASK) { - bgmac_err(bgmac, "No PHY found\n"); diff --git a/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch deleted file mode 100644 index 6015c4aaca..0000000000 --- a/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Wed, 13 May 2015 14:13:28 +0200 -Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/net/phy/b53/b53_common.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/phy/b53/b53_common.c -+++ b/drivers/net/phy/b53/b53_common.c -@@ -25,6 +25,7 @@ - #include <linux/module.h> - #include <linux/switch.h> - #include <linux/platform_data/b53.h> -+#include <linux/of.h> - - #include "b53_regs.h" - #include "b53_priv.h" -@@ -1313,6 +1314,11 @@ static int b53_switch_init(struct b53_de - sw_dev->cpu_port = 5; - } - -+ if (of_machine_is_compatible("asus,rt-ac87u")) -+ sw_dev->cpu_port = 7; -+ else if (of_machine_is_compatible("netgear,r8000")) -+ sw_dev->cpu_port = 8; -+ - /* cpu port is always last */ - sw_dev->ports = sw_dev->cpu_port + 1; - dev->enabled_ports |= BIT(sw_dev->cpu_port); diff --git a/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch b/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch deleted file mode 100644 index 9f2cd396ae..0000000000 --- a/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 666bdfc027cde41a171862dc698987a378c8b66a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Mon, 9 Feb 2015 18:00:42 +0100 -Subject: [PATCH RFC] bcma: use two different initcalls if built-in -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is needed as we can't initialize bus during fs_initcall. -Initialization requires SPROM which depends on NVRAM which depends on -mtd. Since mtd, spi, nand, spi-nor use standard module_init, we have to -do the same in bcma. -Without this we'll try to initialize SPROM without having a ready SPROM -proviver registered using bcma_arch_register_fallback_sprom. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- -While this patch seems to work and I can compile bcma as built-in and -module, I'm not too proud of it. I don't really like these #if(n)def -tricks and I'm afraid bcma_modinit may be called even if -bcma_modinit_early failed. - -Do you see any better idea of solving this? ---- - drivers/bcma/main.c | 16 ++++++++++++++-- - 1 file changed, 14 insertions(+), 2 deletions(-) - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -637,13 +637,25 @@ static int bcma_device_uevent(struct dev - core->id.rev, core->id.class); - } - -+/* Bus has to be registered early, before any bcma driver */ -+static int __init bcma_modinit_early(void) -+{ -+ return bus_register(&bcma_bus_type); -+} -+#ifndef MODULE -+fs_initcall(bcma_modinit_early); -+#endif -+ -+/* Initialization has to be done later with SPI/mtd/NAND/SPROM available */ - static int __init bcma_modinit(void) - { - int err; - -- err = bus_register(&bcma_bus_type); -+#ifdef MODULE -+ err = bcma_modinit_early(); - if (err) - return err; -+#endif - - err = bcma_host_soc_register_driver(); - if (err) { -@@ -660,7 +672,7 @@ static int __init bcma_modinit(void) - - return err; - } --fs_initcall(bcma_modinit); -+module_init(bcma_modinit); - - static void __exit bcma_modexit(void) - { diff --git a/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch b/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch deleted file mode 100644 index d331ae6573..0000000000 --- a/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 5b4fed9fc917cc2bfc5297eeab03aeba5d340618 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 16 Jun 2015 12:33:46 +0200 -Subject: [PATCH] USB: bcma: make helper creating platform dev more generic -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Having "bool ohci" argument bounded us to two cases only and didn't -allow re-using this code for XHCI. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/usb/host/bcma-hcd.c | 24 +++++++++++++----------- - 1 file changed, 13 insertions(+), 11 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -249,7 +249,10 @@ static const struct usb_ehci_pdata ehci_ - static const struct usb_ohci_pdata ohci_pdata = { - }; - --static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) -+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, -+ const char *name, u32 addr, -+ const void *data, -+ size_t size) - { - struct platform_device *hci_dev; - struct resource hci_res[2]; -@@ -264,8 +267,7 @@ static struct platform_device *bcma_hcd_ - hci_res[1].start = dev->irq; - hci_res[1].flags = IORESOURCE_IRQ; - -- hci_dev = platform_device_alloc(ohci ? "ohci-platform" : -- "ehci-platform" , 0); -+ hci_dev = platform_device_alloc(name, 0); - if (!hci_dev) - return ERR_PTR(-ENOMEM); - -@@ -276,12 +278,8 @@ static struct platform_device *bcma_hcd_ - ARRAY_SIZE(hci_res)); - if (ret) - goto err_alloc; -- if (ohci) -- ret = platform_device_add_data(hci_dev, &ohci_pdata, -- sizeof(ohci_pdata)); -- else -- ret = platform_device_add_data(hci_dev, &ehci_pdata, -- sizeof(ehci_pdata)); -+ if (data) -+ ret = platform_device_add_data(hci_dev, data, size); - if (ret) - goto err_alloc; - ret = platform_device_add(hci_dev); -@@ -334,11 +332,15 @@ static int bcma_hcd_probe(struct bcma_de - && chipinfo->rev == 0) - ohci_addr = 0x18009000; - -- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); -+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform", -+ ohci_addr, &ohci_pdata, -+ sizeof(ohci_pdata)); - if (IS_ERR(usb_dev->ohci_dev)) - return PTR_ERR(usb_dev->ohci_dev); - -- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); -+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform", -+ dev->addr, &ehci_pdata, -+ sizeof(ehci_pdata)); - if (IS_ERR(usb_dev->ehci_dev)) { - err = PTR_ERR(usb_dev->ehci_dev); - goto err_unregister_ohci_dev; diff --git a/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch b/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch deleted file mode 100644 index 758b0ac1eb..0000000000 --- a/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch +++ /dev/null @@ -1,102 +0,0 @@ -From 4aed231f49954114d5ae23e97789e9aa540a0b70 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 16 Jun 2015 12:52:07 +0200 -Subject: [PATCH] USB: bcma: use separated function for USB 2.0 initialization -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This will allow adding USB 3.0 (XHCI) support cleanly. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/usb/host/bcma-hcd.c | 51 +++++++++++++++++++++++++++++++-------------- - 1 file changed, 35 insertions(+), 16 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -34,6 +34,7 @@ MODULE_DESCRIPTION("Common USB driver fo - MODULE_LICENSE("GPL"); - - struct bcma_hcd_device { -+ struct bcma_device *core; - struct platform_device *ehci_dev; - struct platform_device *ohci_dev; - }; -@@ -293,27 +294,16 @@ err_alloc: - return ERR_PTR(ret); - } - --static int bcma_hcd_probe(struct bcma_device *dev) -+static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev) - { -- int err; -+ struct bcma_device *dev = usb_dev->core; -+ struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo; - u32 ohci_addr; -- struct bcma_hcd_device *usb_dev; -- struct bcma_chipinfo *chipinfo; -- -- chipinfo = &dev->bus->chipinfo; -- -- /* TODO: Probably need checks here; is the core connected? */ -+ int err; - - if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32))) - return -EOPNOTSUPP; - -- usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device), -- GFP_KERNEL); -- if (!usb_dev) -- return -ENOMEM; -- -- bcma_hci_platform_power_gpio(dev, true); -- - switch (dev->id.id) { - case BCMA_CORE_NS_USB20: - bcma_hcd_init_chip_arm(dev); -@@ -346,7 +336,6 @@ static int bcma_hcd_probe(struct bcma_de - goto err_unregister_ohci_dev; - } - -- bcma_set_drvdata(dev, usb_dev); - return 0; - - err_unregister_ohci_dev: -@@ -354,6 +343,36 @@ err_unregister_ohci_dev: - return err; - } - -+static int bcma_hcd_probe(struct bcma_device *dev) -+{ -+ int err; -+ struct bcma_hcd_device *usb_dev; -+ -+ /* TODO: Probably need checks here; is the core connected? */ -+ -+ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device), -+ GFP_KERNEL); -+ if (!usb_dev) -+ return -ENOMEM; -+ usb_dev->core = dev; -+ -+ bcma_hci_platform_power_gpio(dev, true); -+ -+ switch (dev->id.id) { -+ case BCMA_CORE_USB20_HOST: -+ case BCMA_CORE_NS_USB20: -+ err = bcma_hcd_usb20_init(usb_dev); -+ if (err) -+ return err; -+ break; -+ default: -+ return -ENODEV; -+ } -+ -+ bcma_set_drvdata(dev, usb_dev); -+ return 0; -+} -+ - static void bcma_hcd_remove(struct bcma_device *dev) - { - struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); diff --git a/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch b/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch deleted file mode 100644 index 30313e8a28..0000000000 --- a/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch +++ /dev/null @@ -1,274 +0,0 @@ -From 12c6932caa6b1fce44d0f0c68ec77d4c00ac0be7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Tue, 16 Jun 2015 17:14:26 +0200 -Subject: [PATCH] USB: bcma: add USB 3.0 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/usb/host/bcma-hcd.c | 219 ++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 219 insertions(+) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -37,6 +37,7 @@ struct bcma_hcd_device { - struct bcma_device *core; - struct platform_device *ehci_dev; - struct platform_device *ohci_dev; -+ struct platform_device *xhci_dev; - }; - - /* Wait for bitmask in a register to get set or cleared. -@@ -343,6 +344,215 @@ err_unregister_ohci_dev: - return err; - } - -+static bool bcma_wait_reg(struct bcma_bus *bus, void __iomem *addr, u32 mask, -+ u32 value, int timeout) -+{ -+ unsigned long deadline = jiffies + timeout; -+ u32 val; -+ -+ do { -+ val = readl(addr); -+ if ((val & mask) == value) -+ return true; -+ cpu_relax(); -+ udelay(10); -+ } while (!time_after_eq(jiffies, deadline)); -+ -+ pr_err("Timeout waiting for register %p\n", addr); -+ -+ return false; -+} -+ -+static void bcma_hcd_usb30_phy_init(struct bcma_hcd_device *bcma_hcd) -+{ -+ struct bcma_device *core = bcma_hcd->core; -+ struct bcma_bus *bus = core->bus; -+ struct bcma_chipinfo *chipinfo = &bus->chipinfo; -+ struct bcma_drv_cc_b *ccb = &bus->drv_cc_b; -+ struct bcma_device *arm_core; -+ void __iomem *dmu = NULL; -+ u32 cru_straps_ctrl; -+ -+ if (chipinfo->id != BCMA_CHIP_ID_BCM4707 && -+ chipinfo->id != BCMA_CHIP_ID_BCM53018) -+ return; -+ -+ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9); -+ if (!arm_core) -+ return; -+ -+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000); -+ if (!dmu) -+ goto out; -+ -+ /* Check strapping of PCIE/USB3 SEL */ -+ cru_straps_ctrl = ioread32(dmu + 0x2a0); -+ if ((cru_straps_ctrl & 0x10) == 0) -+ goto out; -+ -+ /* Perform USB3 system soft reset */ -+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); -+ -+ /* Enable MDIO. Setting MDCDIV as 26 */ -+ iowrite32(0x0000009a, ccb->mii + 0x000); -+ udelay(2); -+ -+ switch (chipinfo->id) { -+ case BCMA_CHIP_ID_BCM4707: -+ if (chipinfo->rev == 4) { -+ /* For NS-B0, USB3 PLL Block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8000, ccb->mii + 0x004); -+ -+ /* Clear ana_pllSeqStart */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58061000, ccb->mii + 0x004); -+ -+ /* CMOS Divider ratio to 25 */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582a6400, ccb->mii + 0x004); -+ -+ /* Asserting PLL Reset */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582ec000, ccb->mii + 0x004); -+ -+ /* Deaaserting PLL Reset */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582e8000, ccb->mii + 0x004); -+ -+ /* Deasserting USB3 system reset */ -+ bcma_awrite32(core, BCMA_RESET_CTL, 0); -+ -+ /* Set ana_pllSeqStart */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58069000, ccb->mii + 0x004); -+ -+ /* RXPMD block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8020, ccb->mii + 0x004); -+ -+ /* CDR int loop locking BW to 1 */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58120049, ccb->mii + 0x004); -+ -+ /* CDR int loop acquisition BW to 1 */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580e0049, ccb->mii + 0x004); -+ -+ /* CDR prop loop BW to 1 */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580a005c, ccb->mii + 0x004); -+ -+ /* Waiting MII Mgt interface idle */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ } else { -+ /* PLL30 block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8000, ccb->mii + 0x004); -+ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582a6400, ccb->mii + 0x004); -+ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e80e0, ccb->mii + 0x004); -+ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580a009c, ccb->mii + 0x004); -+ -+ /* Enable SSC */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8040, ccb->mii + 0x004); -+ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580a21d3, ccb->mii + 0x004); -+ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58061003, ccb->mii + 0x004); -+ -+ /* Waiting MII Mgt interface idle */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ -+ /* Deasserting USB3 system reset */ -+ bcma_awrite32(core, BCMA_RESET_CTL, 0); -+ } -+ break; -+ case BCMA_CHIP_ID_BCM53018: -+ /* USB3 PLL Block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8000, ccb->mii + 0x004); -+ -+ /* Assert Ana_Pllseq start */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58061000, ccb->mii + 0x004); -+ -+ /* Assert CML Divider ratio to 26 */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582a6400, ccb->mii + 0x004); -+ -+ /* Asserting PLL Reset */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582ec000, ccb->mii + 0x004); -+ -+ /* Deaaserting PLL Reset */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x582e8000, ccb->mii + 0x004); -+ -+ /* Waiting MII Mgt interface idle */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ -+ /* Deasserting USB3 system reset */ -+ bcma_awrite32(core, BCMA_RESET_CTL, 0); -+ -+ /* PLL frequency monitor enable */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58069000, ccb->mii + 0x004); -+ -+ /* PIPE Block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8060, ccb->mii + 0x004); -+ -+ /* CMPMAX & CMPMINTH setting */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580af30d, ccb->mii + 0x004); -+ -+ /* DEGLITCH MIN & MAX setting */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x580e6302, ccb->mii + 0x004); -+ -+ /* TXPMD block */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x587e8040, ccb->mii + 0x004); -+ -+ /* Enabling SSC */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ iowrite32(0x58061003, ccb->mii + 0x004); -+ -+ /* Waiting MII Mgt interface idle */ -+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000); -+ -+ break; -+ } -+out: -+ if (dmu) -+ iounmap(dmu); -+} -+ -+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd) -+{ -+ struct bcma_device *core = bcma_hcd->core; -+ -+ bcma_core_enable(core, 0); -+ -+ bcma_hcd_usb30_phy_init(bcma_hcd); -+ -+ bcma_hcd->xhci_dev = bcma_hcd_create_pdev(core, "xhci-hcd", core->addr, -+ NULL, 0); -+ if (IS_ERR(bcma_hcd->ohci_dev)) -+ return PTR_ERR(bcma_hcd->ohci_dev); -+ -+ return 0; -+} -+ - static int bcma_hcd_probe(struct bcma_device *dev) - { - int err; -@@ -365,6 +575,11 @@ static int bcma_hcd_probe(struct bcma_de - if (err) - return err; - break; -+ case BCMA_CORE_NS_USB30: -+ err = bcma_hcd_usb30_init(usb_dev); -+ if (err) -+ return err; -+ break; - default: - return -ENODEV; - } -@@ -378,11 +593,14 @@ static void bcma_hcd_remove(struct bcma_ - struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); - struct platform_device *ohci_dev = usb_dev->ohci_dev; - struct platform_device *ehci_dev = usb_dev->ehci_dev; -+ struct platform_device *xhci_dev = usb_dev->xhci_dev; - - if (ohci_dev) - platform_device_unregister(ohci_dev); - if (ehci_dev) - platform_device_unregister(ehci_dev); -+ if (xhci_dev) -+ platform_device_unregister(xhci_dev); - - bcma_core_disable(dev, 0); - } -@@ -419,6 +637,7 @@ static int bcma_hcd_resume(struct bcma_d - static const struct bcma_device_id bcma_hcd_table[] = { - BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), - BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS), -+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS), - BCMA_CORETABLE_END - }; - MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); diff --git a/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch b/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch deleted file mode 100644 index 9ba3bdeece..0000000000 --- a/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch +++ /dev/null @@ -1,45 +0,0 @@ -From bdc3b01d94b22f8b5f9621a1c37336e78f4f1bce Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 21 Jun 2015 12:09:57 +0200 -Subject: [PATCH] USB: bcma: fix setting VCC GPIO value -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It wasn't working (on most of devices?) without setting GPIO direction -and wasn't respecting ACTIVE_LOW flag. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/usb/host/bcma-hcd.c | 13 +++++++++---- - 1 file changed, 9 insertions(+), 4 deletions(-) - ---- a/drivers/usb/host/bcma-hcd.c -+++ b/drivers/usb/host/bcma-hcd.c -@@ -230,17 +230,22 @@ static void bcma_hcd_init_chip_arm(struc - - static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val) - { -+ enum of_gpio_flags of_flags; - int gpio; - -- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0); -+ gpio = of_get_named_gpio_flags(dev->dev.of_node, "vcc-gpio", 0, &of_flags); - if (!gpio_is_valid(gpio)) - return; - - if (val) { -- gpio_request(gpio, "bcma-hcd-gpio"); -- gpio_set_value(gpio, 1); -+ unsigned long flags = 0; -+ bool active_low = !!(of_flags & OF_GPIO_ACTIVE_LOW); -+ -+ flags |= active_low ? GPIOF_ACTIVE_LOW : 0; -+ flags |= active_low ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH; -+ gpio_request_one(gpio, flags, "bcma-hcd-gpio"); - } else { -- gpio_set_value(gpio, 0); -+ gpiod_set_value(gpio_to_desc(gpio), 0); - gpio_free(gpio); - } - } diff --git a/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch b/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch deleted file mode 100644 index d459520d3f..0000000000 --- a/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 9cc14ca0aae53c16d10ffea49848ac61a5015562 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 21 Jun 2015 11:10:49 +0200 -Subject: [PATCH] xhci: add Broadcom specific fake doorbell -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This fixes problem with controller seeing devices only in some small -percentage of cold boots. - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/usb/host/xhci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 62 insertions(+) - ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -122,6 +122,64 @@ int xhci_halt(struct xhci_hcd *xhci) - return ret; - } - -+#ifdef CONFIG_ARCH_BCM_5301X -+int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id) -+{ -+ unsigned int temp1, ret; -+ -+ /* alloc a virt device for slot */ -+ if (!xhci_alloc_virt_device(xhci, slot_id, 0, GFP_NOIO)) { -+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); -+ return 1; -+ } -+ -+ /* ring fake doorbell for slot_id ep 0 */ -+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0); -+ mdelay(1); -+ -+ /* read the status register to check if HSE is set or not? */ -+ temp1 = readl(&xhci->op_regs->status); -+ xhci_dbg(xhci, "op reg status = %x\n",temp1); -+ -+ /* clear HSE if set */ -+ if(temp1 & STS_FATAL) { -+ xhci_dbg(xhci, "HSE problem detected\n"); -+ temp1 &= ~(0x1fff); -+ temp1 |= STS_FATAL; -+ xhci_dbg(xhci, "temp1=%x\n",temp1); -+ writel(temp1, &xhci->op_regs->status); -+ mdelay(1); -+ temp1 = readl(&xhci->op_regs->status); -+ xhci_dbg(xhci, "After clear op reg status=%x\n", temp1); -+ } -+ -+ /* Free virt device */ -+ xhci_free_virt_device(xhci, slot_id); -+ -+ /* Run the controller if needed */ -+ temp1 = readl(&xhci->op_regs->command); -+ if (temp1 & CMD_RUN) -+ return 0; -+ temp1 |= (CMD_RUN); -+ -+ writel(temp1, &xhci->op_regs->command); -+ /* -+ * Wait for the HCHalted Status bit to be 0 to indicate the host is running. -+ */ -+ ret = xhci_handshake(xhci, &xhci->op_regs->status, -+ STS_HALT, 0, XHCI_MAX_HALT_USEC); -+ -+ if (ret == -ETIMEDOUT) { -+ xhci_err(xhci, "Host took too long to start, " -+ "waited %u microseconds.\n", -+ XHCI_MAX_HALT_USEC); -+ return 1; -+ } -+ -+ return 0; -+} -+#endif /* CONFIG_ARCH_BCM_5301X */ -+ - /* - * Set the run bit and wait for the host to be running. - */ -@@ -146,6 +204,10 @@ static int xhci_start(struct xhci_hcd *x - xhci_err(xhci, "Host took too long to start, " - "waited %u microseconds.\n", - XHCI_MAX_HALT_USEC); -+#ifdef CONFIG_ARCH_BCM_5301X -+ xhci_fake_doorbell(xhci, 1); -+#endif /* CONFIG_ARCH_BCM_5301X */ -+ - if (!ret) - xhci->xhc_state &= ~XHCI_STATE_HALTED; - return ret; diff --git a/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch b/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch deleted file mode 100644 index c1dfa92013..0000000000 --- a/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 21500872c1dba33848ddcf6bea97d58772675d36 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 17 May 2015 14:00:52 +0200 -Subject: [PATCH] mtd: bcm47xxpart: workaround for Asus RT-AC87U "asus" - partition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -14,6 +14,7 @@ - #include <linux/slab.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -+#include <linux/of.h> - - #include <uapi/linux/magic.h> - -@@ -135,6 +136,17 @@ static int bcm47xxpart_parse(struct mtd_ - break; - } - -+ /* -+ * Ugly workaround for Asus RT-AC87U and its "asus" partition. -+ * It uses JFFS2 which we don't (want to) detect. We should -+ * probably use DT to define partitions but we need a working -+ * TRX firmware splitter first. -+ */ -+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) { -+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE); -+ continue; -+ } -+ - /* Read beginning of the block */ - if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, - &bytes_read, (uint8_t *)buf) < 0) { |