diff options
Diffstat (limited to 'target/linux')
11 files changed, 234 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 8f9a1e6eb8..39a54cb796 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -46,6 +46,7 @@ get_status_led() { db120) status_led="db120:green:status" ;; + dhp-1565-a1|\ dir-505-a1 |\ dir-600-a1 |\ dir-615-e1 |\ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 7255970622..2678e5510a 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -98,6 +98,10 @@ rb-2011uias-2hnd) ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02" ;; +dhp-1565-a1) + ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20" + ;; + dir-505-a1) ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 5fde7b2b46..1b0bea0ef8 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -260,6 +260,7 @@ mynet-n750) [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac" ;; +dhp-1565-a1 |\ dir-835-a1 |\ wndr3700v4 | \ wndr4300) diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration index 0df94a01c0..1cef8b9937 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration @@ -46,6 +46,7 @@ migrate_leds() board=$(ar71xx_board_name) case "$board" in +dhp-1565-a1|\ dir-825-c1|\ dir-835-a1) migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 0f22618522..30163fb21b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -305,6 +305,9 @@ ar71xx_board_detect() { *"DB120 reference board") name="db120" ;; + *"DHP-1565 rev. A1") + name="dhp-1565-a1" + ;; *"DIR-505 rev. A1") name="dir-505-a1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 0ad49a36a4..1db72d8c4a 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -167,6 +167,7 @@ platform_check_image() { ap81 | \ ap83 | \ ap132 | \ + dhp-1565-a1 |\ dir-505-a1 | \ dir-600-a1 | \ dir-615-c1 | \ diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 30ee592b22..02628ab17e 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DHP_1565_A1=y CONFIG_ATH79_MACH_DIR_505_A1=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c new file mode 100644 index 0000000000..ae477642c0 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c @@ -0,0 +1,170 @@ +/* + * D-Link DHP-1565 rev. A1 board support + * + * Copyright (C) 2014 Jacek Kikiewicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DHP1565A1_GPIO_LED_BLUE_USB 11 +#define DHP1565A1_GPIO_LED_AMBER_POWER 14 +#define DHP1565A1_GPIO_LED_BLUE_POWER 22 +#define DHP1565A1_GPIO_LED_BLUE_WPS 15 +#define DHP1565A1_GPIO_LED_AMBER_PLANET 19 +#define DHP1565A1_GPIO_LED_BLUE_PLANET 18 +#define DHP1565A1_GPIO_LED_WLAN_2G 13 + +#define DHP1565A1_GPIO_WAN_LED_ENABLE 20 + +#define DHP1565A1_GPIO_BTN_RESET 17 +#define DHP1565A1_GPIO_BTN_WPS 16 + +#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 * DHP1565A1_KEYS_POLL_INTERVAL) + +#define DHP1565A1_MAC0_OFFSET 0xFFA0 +#define DHP1565A1_MAC1_OFFSET 0xFFB4 +#define DHP1565A1_WMAC0_OFFSET 0x5 +#define DHP1565A1_WMAC_CALDATA_OFFSET 0x1000 +#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led dhp1565a1_leds_gpio[] __initdata = { + { + .name = "d-link:amber:power", + .gpio = DHP1565A1_GPIO_LED_AMBER_POWER, + .active_low = 1, + }, + { + .name = "d-link:green:power", + .gpio = DHP1565A1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, + { + .name = "d-link:amber:planet", + .gpio = DHP1565A1_GPIO_LED_AMBER_PLANET, + .active_low = 1, + }, + { + .name = "d-link:green:planet", + .gpio = DHP1565A1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = { + { + .desc = "Soft reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DHP1565A1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DHP1565A1_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data dhp1565a1_ar8327_data = { + .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info dhp1565a1_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dhp1565a1_ar8327_data, + }, +}; + +static void __init dhp1565a1_generic_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; + u8 wmac0[ETH_ALEN]; + + ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0); + ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1); + + ath79_register_m25p80(NULL); + + ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dhp1565a1_gpio_keys), + dhp1565a1_gpio_keys); + + ath79_init_mac(wmac0, mac0, 0); + ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(dhp1565a1_mdio0_info, + ARRAY_SIZE(dhp1565a1_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + ath79_register_usb(); +} + +static void __init dhp1565a1_setup(void) +{ + ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio), + dhp1565a1_leds_gpio); + + dhp1565a1_generic_setup(); +} + +MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1", + "D-Link DHP-1565 rev. A1", + dhp1565a1_setup); diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk index eb721c3503..5079af1ff5 100644 --- a/target/linux/ar71xx/generic/profiles/d-link.mk +++ b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -5,6 +5,17 @@ # See /LICENSE for more information. # +define Profile/DHP1565A1 + NAME:=D-Link DHP-1565 rev. A1 + PACKAGES:=kmod-usb-core kmod-usb2 +endef + +define Profile/DHP1565A1/Description + Package set optimized for the D-Link DHP-1565 rev. A1. +endef + +$(eval $(call Profile,DHP1565A1)) + define Profile/DIR505A1 NAME:=D-Link DIR-505 rev. A1 PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 749f11f8e6..af7646c758 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1132,6 +1132,7 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) $(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) +$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) $(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) $(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch new file mode 100644 index 0000000000..6ca0595022 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -39,6 +39,7 @@ + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ + ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -283,6 +283,17 @@ + select ATH79_DEV_USB + select MYLOADER + ++config ATH79_MACH_DHP_1565_A1 ++ bool "D-Link DHP-1565 rev. A1 board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_DIR_505_A1 + bool "D-Link DIR-505-A1 support" + select SOC_AR933X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -54,6 +54,7 @@ + obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o + obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o |