diff options
Diffstat (limited to 'target/linux/xburst/patches-2.6.32/103-serial.patch')
| -rw-r--r-- | target/linux/xburst/patches-2.6.32/103-serial.patch | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/target/linux/xburst/patches-2.6.32/103-serial.patch b/target/linux/xburst/patches-2.6.32/103-serial.patch index 2401248a12..2810631f64 100644 --- a/target/linux/xburst/patches-2.6.32/103-serial.patch +++ b/target/linux/xburst/patches-2.6.32/103-serial.patch @@ -9,7 +9,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c -@@ -196,7 +196,7 @@ static const struct serial8250_config ua +@@ -199,7 +199,7 @@ static const struct serial8250_config ua [PORT_16550A] = { .name = "16550A", .fifo_size = 16, @@ -18,7 +18,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .flags = UART_CAP_FIFO, }, -@@ -403,6 +403,10 @@ static unsigned int mem_serial_in(struct +@@ -406,6 +406,10 @@ static unsigned int mem_serial_in(struct static void mem_serial_out(struct uart_port *p, int offset, int value) { offset = map_8250_out_reg(p, offset) << p->regshift; @@ -29,7 +29,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se writeb(value, p->membase + offset); } -@@ -2213,6 +2217,83 @@ static void serial8250_shutdown(struct u +@@ -2214,6 +2218,83 @@ static void serial8250_shutdown(struct u serial_unlink_irq_chain(up); } @@ -113,7 +113,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) { unsigned int quot; -@@ -2232,6 +2313,7 @@ static unsigned int serial8250_get_divis +@@ -2233,6 +2314,7 @@ static unsigned int serial8250_get_divis return quot; } @@ -121,7 +121,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se static void serial8250_set_termios(struct uart_port *port, struct ktermios *termios, -@@ -2241,6 +2323,9 @@ serial8250_set_termios(struct uart_port +@@ -2242,6 +2324,9 @@ serial8250_set_termios(struct uart_port unsigned char cval, fcr = 0; unsigned long flags; unsigned int baud, quot; @@ -131,7 +131,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se switch (termios->c_cflag & CSIZE) { case CS5: -@@ -2275,7 +2360,12 @@ serial8250_set_termios(struct uart_port +@@ -2276,7 +2361,12 @@ serial8250_set_termios(struct uart_port baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 0xffff, port->uartclk / 16); @@ -144,7 +144,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se /* * Oxford Semi 952 rev B workaround -@@ -2353,6 +2443,10 @@ serial8250_set_termios(struct uart_port +@@ -2354,6 +2444,10 @@ serial8250_set_termios(struct uart_port if (up->capabilities & UART_CAP_UUE) up->ier |= UART_IER_UUE | UART_IER_RTOIE; @@ -155,7 +155,7 @@ Subject: [PATCH] /opt/Projects/openwrt/target/linux/xburst/patches-2.6.31/103-se serial_out(up, UART_IER, up->ier); if (up->capabilities & UART_CAP_EFR) { -@@ -2387,7 +2481,15 @@ serial8250_set_termios(struct uart_port +@@ -2388,7 +2482,15 @@ serial8250_set_termios(struct uart_port serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ } |