openwrt/upstream - upstream openwrt

diff options

Diffstat (limited to 'target/linux/xburst/files-2.6.32/sound/soc')

0 files changed, 0 insertions, 0 deletions

# # Copyright (C) 2006-2011 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk LOADADDR = 0x80010000 # RAM start + 16M KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary RAMSIZE = 0x01000000 # 64MB LOADER_MAKEOPTS= \ KDIR=$(KDIR) \ LOADADDR=$(LOADADDR) \ KERNEL_ENTRY=$(KERNEL_ENTRY) \ RAMSIZE=$(RAMSIZE) define trxalign/jffs2-128k -a 0x20000 endef define trxalign/jffs2-64k -a 0x10000 endef define trxalign/squashfs -a 1024 endef define Image/LimitName16 $(shell expr substr "$(1)" 1 16) endef define Image/Build/CFE # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \ --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \ --load-addr $(LOADADDR) --rsa-signature "$(5)" \ --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \ $(6) $(7) $(8) $(9) endef define Image/Build/CFEFIXUP # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \ --boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \ --load-addr $(LOADADDR) --rsa-signature "$(6)" \ --info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \ $(7) $(8) $(9) $(10) endef define Image/Build/CFEHW553 # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \ --load-addr $(LOADADDR) --tag-version 7 \ --block-size 0x20000 --image-offset $(4) endef define Image/Build/CFEAGPF # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \ --load-addr $(LOADADDR) --tag-version 8 \ --signature2 IMAGE --block-size 0x20000 \ --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1) endef define Image/Build/RG100A # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \ --load-addr $(LOADADDR) --block-size 0x20000 \ --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1) endef define Image/Build/RedBoot cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7 dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync endef define Image/Build/SPW303V # Generate the tagged image $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \ --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \ --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \ --load-addr $(LOADADDR) --rsa-signature "$(5)" \ $(6) $(7) $(8) $(9) # Fix up header $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp endef define Image/Build/CFEOLD $(TOPDIR)/scripts/brcmImage.pl -t -p \ -b $(2) -c $(3) \ -k $(KDIR)/vmlinux.lzma.cfe \ -r $(KDIR)/root.$(1) \ -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin endef define Build/Clean $(MAKE) -C lzma-loader clean endef define Image/Prepare # Standard LZMA kernel cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma # CFE is a LZMA nazi! It took me hours to find out the parameters! # Also I think lzma has a bug cause it generates different output depending on # if you use stdin / stdout or not. Use files instead of stdio here, cause # otherwise CFE will complain and not boot the image. $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp # Strip out the length, CFE doesn't like this dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1 dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc rm -f $(KDIR)/vmlinux.lzma.tmp # Build the LZMA loader rm -f $(KDIR)/loader.gz $(MAKE) -C lzma-loader \ BUILD_DIR="$(KDIR)" \ TARGET="$(KDIR)" \ clean install echo -ne "\\x00" >> $(KDIR)/loader.gz rm -f $(KDIR)/fs_mark touch $(KDIR)/fs_mark $(call prepare_generic_squashfs,$(KDIR)/fs_mark) endef define Image/Build dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync # Various routers $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic) $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5) $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION)) $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,) $(call Image/Build/CFE,$(1),96348R,6348,96348R-generic,,) $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5) $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,) $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,) $(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-gen) $(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-gen) # BT Voyager V210_BTR $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5) # BT Voyager V210_ROI, V210_WB $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5) # BT Voyager V2091_BTR $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5) # BT Voyager V2091_ROI, V2091_WB $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5) # BT Voyager V220V, V220V_MGCP_BTR $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5) # BT Voyager V2110, V2110_AA, V2110_ROI $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5) # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5) # RTA1025W_16 (numerous routers) $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5) # RTA1320_16M (numerous routers) $(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5) # Tecom GW6000 $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6000,6348,GW6000) # Tecom GW6200 $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99')) # Neufbox4 $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION)) # Comtrend 536, 5621 $(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621) # Davolink DV201AMR $(call Image/Build/CFEOLD,$(1),DV201AMR,6348) # USR 9108 $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108) # NetGear DG834GT, DG834PN $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN) # Belkin f5d7633 $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633) # D-Link DSL-2640B, rev B2 $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2) # D-Link DSL-2650U $(call Image/Build/CFE,$(1),96358VW2,6358,DSL2650U) # D-Link DSL-2740B/DSL-2741B, rev C2 $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2) # D-Link DSL-2740B/DSL-2741B, rev C3 $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3) # D-Link DVA-G3810BN/TL $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN) # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811) # TP-Link 8900GB $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02')) # Sagem F@ST2404 $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe) $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION)) # Inventel Livebox $(call Image/Build/RedBoot,livebox) # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0 $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe) $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W) # Pirelli A226G $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe) $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G) # Pirelli A226M $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe) $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M) # RG100A,DB120 etc. $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120) # Telsey CPVA642-type (e.g. CPA-ZNTE60T) $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0") # T-Com Speedport W 500V $(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V) #HW553 $(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553) # T-Com Speedport W 303V Typ B $(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V) endef $(eval $(call BuildImage))


context:
space:
mode: