diff options
Diffstat (limited to 'target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch')
| -rw-r--r-- | target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch deleted file mode 100644 index d50f362fb0..0000000000 --- a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch +++ /dev/null @@ -1,141 +0,0 @@ -From a1c70ed831e4d5356618834202b0da3aa34e218e Mon Sep 17 00:00:00 2001 -From: Hans de Goede <hdegoede@redhat.com> -Date: Fri, 10 Jan 2014 23:23:06 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board - -This add support for the A10-OLinuXino-LIME: -https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME - -A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. - -Signed-off-by: Hans de Goede <hdegoede@redhat.com> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 111 +++++++++++++++++++++++++ - 2 files changed, 112 insertions(+) - create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-hackberry.dtb \ -+ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts -@@ -0,0 +1,111 @@ -+/* -+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun4i-a10.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+ -+/ { -+ model = "Olimex A10-OLinuXino-LIME"; -+ compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; -+ -+ soc@01c00000 { -+ emac: ethernet@01c0b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_pins_a>; -+ phy = <&phy1>; -+ status = "okay"; -+ }; -+ -+ mdio@01c0b080 { -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { -+ allwinner,pins = "PC3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_olinuxinolime: led_pins@0 { -+ allwinner,pins = "PH2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_olinuxinolime>; -+ -+ green { -+ label = "a10-olinuxino-lime:green:usr"; -+ gpios = <&pio 7 2 0>; -+ default-state = "on"; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; -+ gpio = <&pio 2 3 0>; -+ status = "okay"; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; -+}; |