diff options
Diffstat (limited to 'target/linux/ramips')
72 files changed, 241 insertions, 1002 deletions
diff --git a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch index 2e6fd6e0c7..dab8e8d2b8 100644 --- a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch +++ b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch @@ -36,7 +36,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#endif --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -0,0 +1,39 @@ +@@ -0,0 +1,42 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -52,6 +52,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#ifndef _MT7621_REGS_H_ +#define _MT7621_REGS_H_ + ++#define MT7621_PALMBUS_BASE 0x1C000000 ++#define MT7621_PALMBUS_SIZE 0x03FFFFFF ++ +#define MT7621_SYSC_BASE 0x1E000000 + +#define SYSC_REG_CHIP_NAME0 0x00 @@ -76,26 +79,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) + +#endif ---- a/arch/mips/kernel/mips-cm.c -+++ b/arch/mips/kernel/mips-cm.c -@@ -232,7 +232,7 @@ int mips_cm_probe(void) - write_gcr_base(base_reg); - - /* disable CM regions */ -- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); -+/* write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); -@@ -240,7 +240,7 @@ int mips_cm_probe(void) - write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); -- -+*/ - /* probe for an L2-only sync region */ - mips_cm_probe_l2sync(); - --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -51,6 +51,7 @@ SECTIONS @@ -120,7 +103,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> choice prompt "Ralink SoC selection" default SOC_RT305X -@@ -34,6 +39,14 @@ choice +@@ -34,6 +39,16 @@ choice config SOC_MT7620 bool "MT7620/8" @@ -131,11 +114,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_MIPS_CPS + select MIPS_GIC ++ select COMMON_CLK ++ select CLKSRC_MIPS_GIC + select HW_HAS_PCI endchoice choice -@@ -65,6 +78,10 @@ choice +@@ -65,6 +80,10 @@ choice depends on SOC_MT7620 select BUILTIN_DTB @@ -148,19 +133,23 @@ Signed-off-by: John Crispin <blogic@openwrt.org> endif --- a/arch/mips/ralink/Makefile +++ b/arch/mips/ralink/Makefile -@@ -6,16 +6,20 @@ +@@ -6,16 +6,24 @@ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> # Copyright (C) 2013 John Crispin <blogic@openwrt.org> -obj-y := prom.o of.o reset.o clk.o irq.o timer.o -+obj-y := prom.o of.o reset.o clk.o timer.o ++obj-y := prom.o of.o reset.o ++ ++ifndef CONFIG_MIPS_GIC ++ obj-y += clk.o timer.o ++endif obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o +obj-$(CONFIG_IRQ_INTC) += irq.o -+obj-$(CONFIG_MIPS_GIC) += irq-gic.o ++obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o + obj-$(CONFIG_SOC_RT288X) += rt288x.o obj-$(CONFIG_SOC_RT305X) += rt305x.o @@ -188,13 +177,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + +#include <linux/of.h> +#include <linux/irqchip.h> -+ +#include <linux/irqchip/mips-gic.h> + -+unsigned int get_c0_compare_int(void) ++int get_c0_perfcount_int(void) +{ -+ return gic_get_c0_compare_int(); ++ return gic_get_c0_perfcount_int(); +} ++EXPORT_SYMBOL_GPL(get_c0_perfcount_int); + +void __init +arch_init_irq(void) @@ -204,7 +193,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + --- /dev/null +++ b/arch/mips/ralink/mt7621.c -@@ -0,0 +1,213 @@ +@@ -0,0 +1,223 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -359,11 +348,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + } + break; + } -+ cpu_clk = 880000000; -+ ralink_clk_add("cpu", cpu_clk); -+ ralink_clk_add("1e000b00.spi", 50000000); -+ ralink_clk_add("1e000c00.uartlite", 50000000); -+ ralink_clk_add("1e000d00.uart", 50000000); +} + +void __init ralink_of_remap(void) @@ -411,6 +395,21 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + mips_cm_probe(); + mips_cpc_probe(); + ++ if (mips_cm_numiocu()) { ++ /* mips_cm_probe() wipes out bootloader ++ config for CM regions and we have to configure them ++ again. This SoC cannot talk to pamlbus devices ++ witout proper iocu region set up. ++ ++ FIXME: it would be better to do this with values ++ from DT, but we need this very early because ++ without this we cannot talk to pretty much anything ++ including serial. ++ */ ++ write_gcr_reg0_base(MT7621_PALMBUS_BASE); ++ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | CM_GCR_REGn_MASK_CMTGT_IOCU0); ++ } ++ + if (!register_cps_smp_ops()) + return; + if (!register_cmp_smp_ops()) @@ -418,3 +417,21 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + if (!register_vsmp_smp_ops()) + return; +} +--- /dev/null ++++ b/arch/mips/ralink/timer-gic.c +@@ -0,0 +1,15 @@ ++#include <linux/init.h> ++ ++#include <linux/of.h> ++#include <linux/clk-provider.h> ++#include <linux/clocksource.h> ++ ++#include "common.h" ++ ++void __init plat_time_init(void) ++{ ++ ralink_of_remap(); ++ ++ of_clk_init(NULL); ++ clocksource_of_init(); ++} diff --git a/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch index b605c5efda..d4c1506cf7 100644 --- a/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch +++ b/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch @@ -12,7 +12,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -43,6 +43,7 @@ +@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1 obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o obj-$(CONFIG_LANTIQ) += fixup-lantiq.o obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o @@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o --- /dev/null +++ b/arch/mips/pci/pci-mt7621.c -@@ -0,0 +1,813 @@ +@@ -0,0 +1,832 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION @@ -71,6 +71,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#include <linux/version.h> +#include <asm/pci.h> +#include <asm/io.h> ++#include <asm/mips-cm.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/delay.h> @@ -578,6 +579,23 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#endif +} + ++void setup_cm_memory_region(struct resource *mem_resource) ++{ ++ resource_size_t mask; ++ if (mips_cm_numiocu()) { ++ /* FIXME: hardware doesn't accept mask values with 1s after ++ 0s (e.g. 0xffef), so it would be great to warn if that's ++ about to happen */ ++ mask = ~(mem_resource->end - mem_resource->start); ++ ++ write_gcr_reg1_base(mem_resource->start); ++ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); ++ printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n", ++ read_gcr_reg1_base(), ++ read_gcr_reg1_mask()); ++ } ++} ++ +static int mt7621_pci_probe(struct platform_device *pdev) +{ + unsigned long val = 0; @@ -805,6 +823,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + } + + pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node); ++ setup_cm_memory_region(mt7621_controller.mem_resource); + register_pci_controller(&mt7621_controller); + return 0; + diff --git a/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch index fe918e6fd3..248357a8a9 100644 --- a/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch +++ b/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch @@ -9,8 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) -diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig -index d078e61..c2778f2 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -1,11 +1,16 @@ @@ -59,7 +57,7 @@ index d078e61..c2778f2 100644 static int mips_next_event(unsigned long delta, struct clock_event_device *evt) { -@@ -208,18 +228,21 @@ +@@ -208,18 +228,21 @@ int r4k_clockevent_init(void) cd->rating = 300; cd->irq = irq; cd->cpumask = cpumask_of(cpu); @@ -82,7 +80,3 @@ index d078e61..c2778f2 100644 return 0; } --- -1.7.10.4 - - diff --git a/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch index afdc65a3c8..f953aee9ff 100644 --- a/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch +++ b/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) -diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c -index a8e70a9..b36888c 100644 --- a/arch/mips/ralink/cevt-rt3352.c +++ b/arch/mips/ralink/cevt-rt3352.c @@ -29,6 +29,10 @@ @@ -53,7 +51,7 @@ index a8e70a9..b36888c 100644 static int systick_next_event(unsigned long delta, struct clock_event_device *evt) { -@@ -99,6 +120,9 @@ static int systick_shutdown(struct clock_event_device *evt) +@@ -99,6 +120,9 @@ static int systick_shutdown(struct clock sdev->irq_requested = 0; iowrite32(0, systick.membase + SYSTICK_CONFIG); @@ -63,7 +61,7 @@ index a8e70a9..b36888c 100644 return 0; } -@@ -114,15 +138,29 @@ static int systick_set_oneshot(struct clock_event_device *evt) +@@ -114,15 +138,29 @@ static int systick_set_oneshot(struct cl iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); @@ -93,6 +91,3 @@ index a8e70a9..b36888c 100644 systick_irqaction.name = np->name; systick.dev.name = np->name; clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch index 6b09c0e894..3a05a30a86 100644 --- a/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch +++ b/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch @@ -8,8 +8,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/of.c | 2 ++ 1 file changed, 2 insertions(+) -diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c -index 0d30dcd..da85bbf 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -76,6 +76,8 @@ void __init plat_mem_setup(void) @@ -21,6 +19,3 @@ index 0d30dcd..da85bbf 100644 of_scan_flat_dt(early_init_dt_find_memory, NULL); if (memory_dtb) of_scan_flat_dt(early_init_dt_scan_memory, NULL); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch index 6fa90f245e..7788926dd8 100644 --- a/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch +++ b/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch @@ -15,8 +15,6 @@ Subject: [PATCH 08/53] MIPS: ralink: mt7620: fix usb issue during frequency arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 2ea5ff6..33a7e42 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -40,6 +40,12 @@ @@ -52,6 +50,3 @@ index 2ea5ff6..33a7e42 100644 } void __init ralink_of_remap(void) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch index 2f03f1d496..2164d357f0 100644 --- a/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch +++ b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 4 files changed, 399 insertions(+) create mode 100644 arch/mips/pci/pci-mt7620.c -diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h -index 1976fb8..72e64fa 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -19,6 +19,7 @@ enum mt762x_soc_type { @@ -24,11 +22,9 @@ index 1976fb8..72e64fa 100644 #define MT7620_SYSC_BASE 0x10000000 -diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile -index 04e61c3..ccbdc90 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o +@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1 obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o obj-$(CONFIG_LANTIQ) += fixup-lantiq.o obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o @@ -36,9 +32,6 @@ index 04e61c3..ccbdc90 100644 obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o -diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c -new file mode 100644 -index 0000000..780e4e9 --- /dev/null +++ b/arch/mips/pci/pci-mt7620.c @@ -0,0 +1,396 @@ @@ -438,8 +431,6 @@ index 0000000..780e4e9 +} + +arch_initcall(mt7620_pci_init); -diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig -index c2778f2..2aa5e42 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -43,6 +43,7 @@ choice @@ -450,6 +441,3 @@ index c2778f2..2aa5e42 100644 config SOC_MT7621 bool "MT7621" --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch b/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch index e2a7d821ef..11dad7a8c0 100644 --- a/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch +++ b/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/rt3883.c | 1 + 3 files changed, 3 insertions(+) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 33a7e42..0ba49a1 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -427,6 +427,7 @@ void __init ralink_clk_init(void) @@ -24,8 +22,6 @@ index 33a7e42..0ba49a1 100644 ralink_clk_add("10000c00.uartlite", periph_rate); ralink_clk_add("10180000.wmac", xtal_rate); -diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c -index c40776a..eeb747a 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -202,6 +202,7 @@ void __init ralink_clk_init(void) @@ -36,8 +32,6 @@ index c40776a..eeb747a 100644 ralink_clk_add("10000100.timer", wdt_rate); ralink_clk_add("10000120.watchdog", wdt_rate); ralink_clk_add("10000500.uart", uart_rate); -diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c -index 86a535c..26827bc 100644 --- a/arch/mips/ralink/rt3883.c +++ b/arch/mips/ralink/rt3883.c @@ -109,6 +109,7 @@ void __init ralink_clk_init(void) @@ -48,6 +42,3 @@ index 86a535c..26827bc 100644 ralink_clk_add("10000c00.uartlite", 40000000); ralink_clk_add("10100000.ethernet", sys_rate); ralink_clk_add("10180000.wmac", 40000000); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch b/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch index bee7ce3b28..81cf233a1e 100644 --- a/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch +++ b/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/rt305x.c | 12 +++++------- 5 files changed, 29 insertions(+), 31 deletions(-) -diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h -index 72e64fa..0ef882b 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -13,14 +13,6 @@ @@ -31,8 +29,6 @@ index 72e64fa..0ef882b 100644 #define MT7620_SYSC_BASE 0x10000000 #define SYSC_REG_CHIP_NAME0 0x00 -diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h -index bd93014..8fcbd0f 100644 --- a/arch/mips/include/asm/mach-ralink/ralink_regs.h +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h @@ -13,6 +13,20 @@ @@ -56,8 +52,6 @@ index bd93014..8fcbd0f 100644 extern __iomem void *rt_sysc_membase; extern __iomem void *rt_memc_membase; -diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h -index 96f731b..2eea793 100644 --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h @@ -13,25 +13,16 @@ @@ -110,8 +104,6 @@ index 96f731b..2eea793 100644 } #define RT305X_SYSC_BASE 0x10000000 -diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c -index 09419f6..d0978d5 100644 --- a/arch/mips/ralink/prom.c +++ b/arch/mips/ralink/prom.c @@ -15,10 +15,13 @@ @@ -129,8 +121,6 @@ index 09419f6..d0978d5 100644 const char *get_system_type(void) { -diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c -index eeb747a..51f33a5 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -21,8 +21,6 @@ @@ -142,7 +132,7 @@ index eeb747a..51f33a5 100644 static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; static struct rt2880_pmx_func uartf_func[] = { -@@ -236,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -236,24 +234,24 @@ void prom_soc_init(struct ralink_soc_inf icache_sets = (read_c0_config1() >> 22) & 7; if (icache_sets == 1) { @@ -172,6 +162,3 @@ index eeb747a..51f33a5 100644 name = "RT5350"; soc_info->compatible = "ralink,rt5350-soc"; } else { --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch b/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch index 58983f0c2f..133e4eaea0 100644 --- a/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch +++ b/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/cevt-rt3352.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c -index b36888c..cecf44f 100644 --- a/arch/mips/ralink/cevt-rt3352.c +++ b/arch/mips/ralink/cevt-rt3352.c -@@ -69,7 +69,7 @@ static int systick_next_event(unsigned long delta, +@@ -69,7 +69,7 @@ static int systick_next_event(unsigned l sdev = container_of(evt, struct systick_device, dev); count = ioread32(sdev->membase + SYSTICK_COUNT); count = (count + delta) % SYSTICK_FREQ; @@ -21,6 +19,3 @@ index b36888c..cecf44f 100644 return 0; } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch index cb51fe69e6..12abdee344 100644 --- a/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch +++ b/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c -index 4795151..75bde36 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c -@@ -681,7 +681,6 @@ static void __init arch_mem_init(char **cmdline_p) +@@ -681,7 +681,6 @@ static void __init arch_mem_init(char ** crashk_res.end - crashk_res.start + 1, BOOTMEM_DEFAULT); #endif @@ -28,6 +26,3 @@ index 4795151..75bde36 100644 } unsigned long kernelsp[NR_CPUS]; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch b/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch index d6410505c7..50b3dc8318 100644 --- a/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch +++ b/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/cevt-rt3352.c | 85 ++++++++++++++++++++++++++-------------- 1 file changed, 56 insertions(+), 29 deletions(-) -diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c -index cecf44f..424635c 100644 --- a/arch/mips/ralink/cevt-rt3352.c +++ b/arch/mips/ralink/cevt-rt3352.c -@@ -52,7 +52,7 @@ static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) +@@ -52,7 +52,7 @@ static inline void mt7620_freq_scaling(s sdev->freq_scale = status; @@ -21,7 +19,7 @@ index cecf44f..424635c 100644 (status) ? ("enable") : ("disable")); if (status) rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG); -@@ -60,18 +60,33 @@ static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) +@@ -60,18 +60,33 @@ static inline void mt7620_freq_scaling(s rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG); } @@ -60,7 +58,7 @@ index cecf44f..424635c 100644 } static void systick_event_handler(struct clock_event_device *dev) -@@ -81,20 +96,25 @@ static void systick_event_handler(struct clock_event_device *dev) +@@ -81,20 +96,25 @@ static void systick_event_handler(struct static irqreturn_t systick_interrupt(int irq, void *dev_id) { @@ -68,12 +66,12 @@ index cecf44f..424635c 100644 + int ret = 0; + struct clock_event_device *cdev; + struct systick_device *sdev; -+ + +- dev->event_handler(dev); + if (read_c0_cause() & STATUSF_IP7) { + cdev = (struct clock_event_device *) dev_id; + sdev = container_of(cdev, struct systick_device, dev); - -- dev->event_handler(dev); ++ + /* Clear Count/Compare Interrupt */ + write_compare(sdev, read_compare(sdev)); + cdev->event_handler(cdev); @@ -94,7 +92,7 @@ index cecf44f..424635c 100644 .features = CLOCK_EVT_FEAT_ONESHOT, .set_next_event = systick_next_event, .set_state_shutdown = systick_shutdown, -@@ -116,9 +136,9 @@ static int systick_shutdown(struct clock_event_device *evt) +@@ -116,9 +136,9 @@ static int systick_shutdown(struct clock sdev = container_of(evt, struct systick_device, dev); if (sdev->irq_requested) @@ -106,7 +104,7 @@ index cecf44f..424635c 100644 if (systick_freq_scaling) systick_freq_scaling(sdev, 0); -@@ -145,38 +165,45 @@ static int systick_set_oneshot(struct clock_event_device *evt) +@@ -145,38 +165,45 @@ static int systick_set_oneshot(struct cl } static const struct of_device_id systick_match[] = { @@ -165,6 +163,3 @@ index cecf44f..424635c 100644 pr_info("%s: running - mult: %d, shift: %d\n", np->name, systick.dev.mult, systick.dev.shift); } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch index ea04175482..6f5a6f4b94 100644 --- a/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch +++ b/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch @@ -9,8 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig -index 2aa5e42..84cf692 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -13,9 +13,9 @@ config CLKEVT_RT3352 @@ -25,6 +23,3 @@ index 2aa5e42..84cf692 100644 config IRQ_INTC bool --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch b/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch index 57cc092ef9..d25f909f89 100644 --- a/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch +++ b/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/mt7620.c | 3 --- 1 file changed, 3 deletions(-) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 0ba49a1..794a7c7 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -526,9 +526,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -526,9 +526,6 @@ void prom_soc_init(struct ralink_soc_inf mt762x_soc = MT762X_SOC_MT7620N; name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; @@ -22,6 +20,3 @@ index 0ba49a1..794a7c7 100644 } } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { mt762x_soc = MT762X_SOC_MT7628AN; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch b/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch index 636edad8c8..a9122e1b6f 100644 --- a/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch +++ b/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/reset.c | 1 - 1 file changed, 1 deletion(-) -diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c -index 55c7ec5..ee26d45 100644 --- a/arch/mips/ralink/reset.c +++ b/arch/mips/ralink/reset.c -@@ -98,7 +98,6 @@ static int __init mips_reboot_setup(void) +@@ -98,7 +98,6 @@ static int __init mips_reboot_setup(void { _machine_restart = ralink_restart; _machine_halt = ralink_halt; @@ -20,6 +18,3 @@ index 55c7ec5..ee26d45 100644 return 0; } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch b/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch index dbd3db0106..8f572c9c1a 100644 --- a/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch +++ b/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch @@ -8,8 +8,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/reset.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) -diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c -index ee26d45..ee117c4 100644 --- a/arch/mips/ralink/reset.c +++ b/arch/mips/ralink/reset.c @@ -11,6 +11,7 @@ @@ -45,6 +43,3 @@ index ee26d45..ee117c4 100644 local_irq_disable(); rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL); unreachable(); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch b/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch index 9e7e3e30d9..d2da23a4ca 100644 --- a/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch +++ b/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch @@ -9,9 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 1 file changed, 65 insertions(+) create mode 100644 arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h -diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h -new file mode 100644 -index 0000000..15db1b3 --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h @@ -0,0 +1,65 @@ @@ -80,6 +77,3 @@ index 0000000..15db1b3 +#define cpu_has_userlocal 1 + +#endif /* _MT7621_CPU_FEATURE_OVERRIDES_H */ --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch b/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch index 0b5cb04cfb..713dcfabad 100644 --- a/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch +++ b/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/mt7620.c | 76 +++++++++++++++++++++++++++++---------------- 1 file changed, 50 insertions(+), 26 deletions(-) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 794a7c7..41b4a3e 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -104,28 +104,28 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = { +@@ -104,28 +104,28 @@ static struct rt2880_pmx_group mt7620a_p }; static struct rt2880_pmx_func pwm1_grp_mt7628[] = { @@ -47,7 +45,7 @@ index 794a7c7..41b4a3e 100644 FUNC("pwm", 2, 45, 2), FUNC("gpio", 1, 45, 2), FUNC("uart", 0, 45, 2), -@@ -168,7 +168,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = { +@@ -168,7 +168,7 @@ static struct rt2880_pmx_func spi_cs1_gr FUNC("-", 3, 6, 1), FUNC("refclk", 2, 6, 1), FUNC("gpio", 1, 6, 1), @@ -56,7 +54,7 @@ index 794a7c7..41b4a3e 100644 }; static struct rt2880_pmx_func spis_grp_mt7628[] = { -@@ -185,28 +185,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = { +@@ -185,28 +185,44 @@ static struct rt2880_pmx_func gpio_grp_m FUNC("gpio", 0, 11, 1), }; @@ -119,7 +117,7 @@ index 794a7c7..41b4a3e 100644 1, MT7628_GPIO_MODE_PWM0), GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2), -@@ -230,6 +246,10 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = { +@@ -230,6 +246,10 @@ static struct rt2880_pmx_group mt7628an_ 1, MT7628_GPIO_MODE_SPIS), GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO), @@ -130,7 +128,7 @@ index 794a7c7..41b4a3e 100644 { 0 } }; -@@ -542,7 +562,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -542,7 +562,11 @@ void prom_soc_init(struct ralink_soc_inf (rev & CHIP_REV_ECO_MASK)); cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); @@ -143,6 +141,3 @@ index 794a7c7..41b4a3e 100644 soc_info->mem_base = MT7620_DRAM_BASE; if (mt762x_soc == MT762X_SOC_MT7628AN) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch b/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch index 5aae36088f..f54acb8d36 100644 --- a/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch +++ b/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch @@ -10,8 +10,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/mt7620.c | 21 ++++++++++++++++----- 3 files changed, 18 insertions(+), 5 deletions(-) -diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h -index 0ef882b..455d406 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -17,6 +17,7 @@ @@ -22,8 +20,6 @@ index 0ef882b..455d406 100644 #define SYSC_REG_CHIP_REV 0x0c #define SYSC_REG_SYSTEM_CONFIG0 0x10 #define SYSC_REG_SYSTEM_CONFIG1 0x14 -diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h -index 8fcbd0f..69fbcec 100644 --- a/arch/mips/include/asm/mach-ralink/ralink_regs.h +++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h @@ -24,6 +24,7 @@ enum ralink_soc_type { @@ -34,8 +30,6 @@ index 8fcbd0f..69fbcec 100644 }; extern enum ralink_soc_type ralink_soc; -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 41b4a3e..6975ed8 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -46,6 +46,9 @@ enum mt762x_soc_type mt762x_soc; @@ -67,7 +61,7 @@ index 41b4a3e..6975ed8 100644 /* * When the CPU goes into sleep mode, the BUS clock will be too low for * USB to function properly -@@ -548,8 +552,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -548,8 +552,15 @@ void prom_soc_init(struct ralink_soc_inf soc_info->compatible = "ralink,mt7620n-soc"; } } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { @@ -85,7 +79,7 @@ index 41b4a3e..6975ed8 100644 soc_info->compatible = "ralink,mt7628an-soc"; } else { panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); -@@ -582,7 +593,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -582,7 +593,7 @@ void prom_soc_init(struct ralink_soc_inf pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); @@ -94,6 +88,3 @@ index 41b4a3e..6975ed8 100644 rt2880_pinmux_data = mt7628an_pinmux_data; else rt2880_pinmux_data = mt7620a_pinmux_data; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch b/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch index 97f8de3e42..967b83e391 100644 --- a/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch +++ b/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/mt7620.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index 6975ed8..da734e2 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -567,7 +567,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -567,7 +567,7 @@ void prom_soc_init(struct ralink_soc_inf } snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, @@ -21,6 +19,3 @@ index 6975ed8..da734e2 100644 name, (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, (rev & CHIP_REV_ECO_MASK)); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch b/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch index 3e5d04a259..5d7f045445 100644 --- a/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch +++ b/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch @@ -8,8 +8,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/mt7620.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) -diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c -index da734e2..db99e9c 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -37,9 +37,6 @@ @@ -40,7 +38,7 @@ index da734e2..db99e9c 100644 /* * When the CPU goes into sleep mode, the BUS clock will be too low for * USB to function properly -@@ -543,11 +540,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -543,11 +540,11 @@ void prom_soc_init(struct ralink_soc_inf if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { if (bga) { @@ -54,7 +52,7 @@ index da734e2..db99e9c 100644 name = "MT7620N"; soc_info->compatible = "ralink,mt7620n-soc"; } -@@ -555,10 +552,10 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -555,10 +552,10 @@ void prom_soc_init(struct ralink_soc_inf u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG); if (efuse & EFUSE_MT7688) { @@ -67,7 +65,7 @@ index da734e2..db99e9c 100644 name = "MT7628AN"; } soc_info->compatible = "ralink,mt7628an-soc"; -@@ -580,7 +577,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -580,7 +577,7 @@ void prom_soc_init(struct ralink_soc_inf dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; soc_info->mem_base = MT7620_DRAM_BASE; @@ -76,7 +74,7 @@ index da734e2..db99e9c 100644 mt7628_dram_init(soc_info); else mt7620_dram_init(soc_info); -@@ -593,7 +590,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info) +@@ -593,7 +590,7 @@ void prom_soc_init(struct ralink_soc_inf pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); @@ -85,6 +83,3 @@ index da734e2..db99e9c 100644 rt2880_pinmux_data = mt7628an_pinmux_data; else rt2880_pinmux_data = mt7620a_pinmux_data; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch index e15aabd669..71daf28274 100644 --- a/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch +++ b/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> include/linux/gpio/consumer.h | 8 +++++ 4 files changed, 91 insertions(+), 1 deletion(-) -diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c -index fa6e3c8..c3f34c0 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -23,6 +23,8 @@ @@ -24,7 +22,7 @@ index fa6e3c8..c3f34c0 100644 #include "gpiolib.h" -@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip *chip) +@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip gpiochip_remove_pin_ranges(chip); of_node_put(chip->of_node); } @@ -94,8 +92,6 @@ index fa6e3c8..c3f34c0 100644 + return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); +} +device_initcall(of_gpio_export_init); -diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c -index b57ed8e..0df781d 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -544,7 +544,7 @@ static struct class gpio_class = { @@ -107,7 +103,7 @@ index b57ed8e..0df781d 100644 { struct gpio_chip *chip; struct gpiod_data *data; -@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) +@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc, offset = gpio_chip_hwgpio(desc); if (chip->names && chip->names[offset]) ioname = chip->names[offset]; @@ -129,11 +125,9 @@ index b57ed8e..0df781d 100644 EXPORT_SYMBOL_GPL(gpiod_export); static int match_export(struct device *dev, const void *desc) -diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h -index 40ec143..dcb07ab 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h -@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change) +@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g return gpiod_export(gpio_to_desc(gpio), direction_may_change); } @@ -146,11 +140,9 @@ index 40ec143..dcb07ab 100644 static inline int gpio_export_link(struct device *dev, const char *name, unsigned gpio) { -diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h -index 14cac67..8097374 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h -@@ -426,6 +426,7 @@ static inline struct gpio_desc *devm_get_gpiod_from_child( +@@ -426,6 +426,7 @@ static inline struct gpio_desc *devm_get #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) @@ -158,7 +150,7 @@ index 14cac67..8097374 100644 int gpiod_export(struct gpio_desc *desc, bool direction_may_change); int gpiod_export_link(struct device *dev, const char *name, struct gpio_desc *desc); -@@ -433,6 +434,13 @@ void gpiod_unexport(struct gpio_desc *desc); +@@ -433,6 +434,13 @@ void gpiod_unexport(struct gpio_desc *de #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ @@ -172,6 +164,3 @@ index 14cac67..8097374 100644 static inline int gpiod_export(struct gpio_desc *desc, bool direction_may_change) { --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch index 76a2ea13f4..b8c4f2c09a 100644 --- a/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch +++ b/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 4 files changed, 482 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-rt2880.c -diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig -index e3aa5b0..0098bff 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -557,6 +557,8 @@ config RALINK @@ -25,8 +23,6 @@ index e3aa5b0..0098bff 100644 config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" -diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig -index 84dd2ed..d016935 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -103,6 +103,11 @@ config PINCTRL_LPC18XX @@ -41,8 +37,6 @@ index 84dd2ed..d016935 100644 config PINCTRL_FALCON bool depends on SOC_FALCON -diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile -index cad077c..0c86632 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_MESON) += meson/ @@ -53,9 +47,6 @@ index cad077c..0c86632 100644 obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o -diff --git a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c -new file mode 100644 -index 0000000..fe0af77 --- /dev/null +++ b/drivers/pinctrl/pinctrl-rt2880.c @@ -0,0 +1,474 @@ @@ -533,6 +524,3 @@ index 0000000..fe0af77 +} + +core_initcall_sync(rt2880_pinmux_init); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch index f6b60e90af..7d5f98f647 100644 --- a/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch +++ b/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch @@ -14,9 +14,6 @@ Cc: linux-gpio@vger.kernel.org 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt -diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -new file mode 100644 -index 0000000..b4acf02 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt @@ -0,0 +1,40 @@ @@ -60,6 +57,3 @@ index 0000000..b4acf02 + 30 34 ]; + + }; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch index 6bc9d1f7ea..8534da3439 100644 --- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch +++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 181 insertions(+) create mode 100644 drivers/phy/phy-ralink-usb.c -diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig -index 47da573..96ef184 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -331,6 +331,11 @@ config PHY_XGENE @@ -27,18 +25,13 @@ index 47da573..96ef184 100644 config PHY_STIH407_USB tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" depends on RESET_CONTROLLER -diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile -index a5b18c1..8dbf6cc 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile -@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom- obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o -diff --git a/drivers/phy/phy-ralink-usb.c b/drivers/phy/phy-ralink-usb.c -new file mode 100644 -index 0000000..6c74954 --- /dev/null +++ b/drivers/phy/phy-ralink-usb.c @@ -0,0 +1,175 @@ @@ -217,6 +210,3 @@ index 0000000..6c74954 +MODULE_DESCRIPTION("Ralink USB phy driver"); +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_LICENSE("GPL v2"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch index b57fe9c545..5e07d12ba0 100644 --- a/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch +++ b/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/usb/host/ohci-platform.c | 1 + 2 files changed, 2 insertions(+) -diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c -index 5c3c085..fe78568 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c -@@ -379,6 +379,7 @@ static int ehci_platform_resume(struct device *dev) +@@ -381,6 +381,7 @@ static int ehci_platform_resume(struct d static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, { .compatible = "wm,prizm-ehci", }, @@ -23,11 +21,9 @@ index 5c3c085..fe78568 100644 { .compatible = "generic-ehci", }, { .compatible = "cavium,octeon-6335-ehci", }, {} -diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c -index c2669f18..5cf794a 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c -@@ -344,6 +344,7 @@ static int ohci_platform_resume(struct device *dev) +@@ -344,6 +344,7 @@ static int ohci_platform_resume(struct d #endif /* CONFIG_PM_SLEEP */ static const struct of_device_id ohci_platform_ids[] = { @@ -35,6 +31,3 @@ index c2669f18..5cf794a 100644 { .compatible = "generic-ohci", }, { .compatible = "cavium,octeon-6335-ohci", }, { } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch index ae004446bd..1a805da572 100644 --- a/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch +++ b/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/media/usb/uvc/uvcvideo.h | 5 +- 4 files changed, 165 insertions(+), 1 deletion(-) -diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c -index 4b5b3e8..6808bcc 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c -@@ -2536,6 +2536,18 @@ static struct usb_device_id uvc_ids[] = { +@@ -2536,6 +2536,18 @@ static struct usb_device_id uvc_ids[] = .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_FORCE_Y8 }, @@ -34,11 +32,9 @@ index 4b5b3e8..6808bcc 100644 /* Generic USB Video Class */ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, {} -diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c -index f552ab9..7132ad4 100644 --- a/drivers/media/usb/uvc/uvc_status.c +++ b/drivers/media/usb/uvc/uvc_status.c -@@ -139,6 +139,7 @@ static void uvc_status_complete(struct urb *urb) +@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u switch (dev->status[0] & 0x0f) { case UVC_STATUS_TYPE_CONTROL: uvc_event_control(dev, dev->status, len); @@ -46,7 +42,7 @@ index f552ab9..7132ad4 100644 break; case UVC_STATUS_TYPE_STREAMING: -@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *dev) +@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d } pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); @@ -54,8 +50,6 @@ index f552ab9..7132ad4 100644 /* For high-speed interrupt endpoints, the bInterval value is used as * an exponent of two. Some developers forgot about it. -diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c -index f839654..b30aab6 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -21,6 +21,11 @@ @@ -70,7 +64,7 @@ index f839654..b30aab6 100644 #include <media/v4l2-common.h> -@@ -1089,9 +1094,149 @@ static void uvc_video_decode_data(struct uvc_streaming *stream, +@@ -1089,9 +1094,149 @@ static void uvc_video_decode_data(struct } } @@ -220,7 +214,7 @@ index f839654..b30aab6 100644 /* Mark the buffer as done if the EOF marker is set. */ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); -@@ -1504,6 +1649,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream, +@@ -1504,6 +1649,8 @@ static int uvc_init_video_isoc(struct uv if (npackets == 0) return -ENOMEM; @@ -229,8 +223,6 @@ index f839654..b30aab6 100644 size = npackets * psize; for (i = 0; i < UVC_URBS; ++i) { -diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h -index 816dd1a..d0aa324 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -152,7 +152,9 @@ @@ -252,6 +244,3 @@ index 816dd1a..d0aa324 100644 }; enum uvc_handle_state { --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch b/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch index ca6821e738..2927895498 100644 --- a/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch +++ b/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch @@ -8,8 +8,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/usb/dwc2/hcd.c | 3 +++ 1 file changed, 3 insertions(+) -diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c -index f845c41..767c93a 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -47,6 +47,7 @@ @@ -20,7 +18,7 @@ index f845c41..767c93a 100644 #include <linux/usb/hcd.h> #include <linux/usb/ch11.h> -@@ -2841,6 +2842,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq) +@@ -2841,6 +2842,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso retval = -ENOMEM; @@ -29,6 +27,3 @@ index f845c41..767c93a 100644 hcfg = readl(hsotg->regs + HCFG); dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch index 8f28f86556..07c2eac015 100644 --- a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch +++ b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch @@ -43,7 +43,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c -@@ -214,8 +214,13 @@ +@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *de goto disable_pci; } @@ -59,7 +59,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* EHCI, OHCI */ --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -1287,7 +1287,7 @@ +@@ -1287,7 +1287,7 @@ static void hub_quiesce(struct usb_hub * if (type != HUB_SUSPEND) { /* Disconnect all the children */ for (i = 0; i < hdev->maxchild; ++i) { @@ -70,7 +70,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> } --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c -@@ -480,8 +480,10 @@ +@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct u struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_port *peer; @@ -87,7 +87,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> } --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig -@@ -41,6 +41,13 @@ +@@ -41,6 +41,13 @@ config USB_XHCI_PLATFORM If unsure, say N. @@ -101,7 +101,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> config USB_XHCI_MVEBU tristate "xHCI support for Marvell Armada 375/38x" select USB_XHCI_PLATFORM -@@ -590,7 +597,7 @@ +@@ -590,7 +597,7 @@ endif # USB_OHCI_HCD config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" @@ -112,7 +112,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> accessing the USB hardware in the PC (which is also called the USB --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile -@@ -14,7 +14,12 @@ +@@ -14,7 +14,12 @@ xhci-hcd-y := xhci.o xhci-mem.o xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o xhci-hcd-y += xhci-trace.o @@ -125,7 +125,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ifneq ($(CONFIG_USB_XHCI_MVEBU), ) xhci-plat-hcd-y += xhci-mvebu.o endif -@@ -24,11 +29,10 @@ +@@ -24,11 +29,10 @@ endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -3834,7 +3834,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c -@@ -67,6 +67,9 @@ +@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) { @@ -3844,7 +3844,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (seg->trbs) { dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); seg->trbs = NULL; -@@ -1471,9 +1474,17 @@ +@@ -1471,9 +1474,17 @@ int xhci_endpoint_init(struct xhci_hcd * max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; } @@ -5080,7 +5080,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#endif --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c -@@ -43,6 +43,13 @@ +@@ -43,6 +43,13 @@ static void xhci_plat_quirks(struct devi * dev struct in order to setup MSI */ xhci->quirks |= XHCI_PLAT; @@ -5094,7 +5094,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> } /* called during probe() after chip reset completes */ -@@ -89,7 +96,11 @@ +@@ -89,7 +96,11 @@ static int xhci_plat_probe(struct platfo driver = &xhci_plat_hc_driver; @@ -5108,7 +5108,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -254,16 +254,20 @@ +@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhc static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, unsigned int num_trbs) { @@ -5129,7 +5129,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> return 1; } -@@ -2869,6 +2873,7 @@ +@@ -2869,6 +2873,7 @@ static int prepare_ring(struct xhci_hcd next = ring->enqueue; while (last_trb(xhci, ring, ring->enq_seg, next)) { @@ -5137,7 +5137,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* If we're not dealing with 0.95 hardware or isoc rings * on AMD 0.96 host, clear the chain bit. */ -@@ -2878,6 +2883,9 @@ +@@ -2878,6 +2883,9 @@ static int prepare_ring(struct xhci_hcd next->link.control &= cpu_to_le32(~TRB_CHAIN); else next->link.control |= cpu_to_le32(TRB_CHAIN); @@ -5147,7 +5147,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> wmb(); next->link.control ^= cpu_to_le32(TRB_CYCLE); -@@ -3008,6 +3016,9 @@ +@@ -3008,6 +3016,9 @@ static void giveback_first_trb(struct xh start_trb->field[3] |= cpu_to_le32(start_cycle); else start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); @@ -5157,7 +5157,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); } -@@ -3063,6 +3074,29 @@ +@@ -3063,6 +3074,29 @@ static u32 xhci_td_remainder(unsigned in return (remainder >> 10) << 17; } @@ -5187,7 +5187,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* * For xHCI 1.0 host controllers, TD size is the number of max packet sized * packets remaining in the TD (*not* including this TRB). -@@ -3220,6 +3254,7 @@ +@@ -3220,6 +3254,7 @@ static int queue_bulk_sg_tx(struct xhci_ } /* Set the TRB length, TD size, and interrupter fields. */ @@ -5195,7 +5195,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (xhci->hci_version < 0x100) { remainder = xhci_td_remainder( urb->transfer_buffer_length - -@@ -3229,6 +3264,12 @@ +@@ -3229,6 +3264,12 @@ static int queue_bulk_sg_tx(struct xhci_ trb_buff_len, total_packet_count, urb, num_trbs - 1); } @@ -5208,7 +5208,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); -@@ -3293,6 +3334,9 @@ +@@ -3293,6 +3334,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd * int running_total, trb_buff_len, ret; unsigned int total_packet_count; u64 addr; @@ -5218,7 +5218,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (urb->num_sgs) return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); -@@ -3317,6 +3361,25 @@ +@@ -3317,6 +3361,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd * num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } @@ -5244,7 +5244,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, -@@ -3393,6 +3456,7 @@ +@@ -3393,6 +3456,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * field |= TRB_ISP; /* Set the TRB length, TD size, and interrupter fields. */ @@ -5252,7 +5252,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (xhci->hci_version < 0x100) { remainder = xhci_td_remainder( urb->transfer_buffer_length - -@@ -3402,6 +3466,10 @@ +@@ -3402,6 +3466,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd * trb_buff_len, total_packet_count, urb, num_trbs - 1); } @@ -5263,7 +5263,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); -@@ -3491,7 +3559,11 @@ +@@ -3491,7 +3559,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ @@ -5275,7 +5275,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) field |= TRB_TX_TYPE(TRB_DATA_IN); -@@ -3515,7 +3587,12 @@ +@@ -3515,7 +3587,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field = TRB_TYPE(TRB_DATA); length_field = TRB_LEN(urb->transfer_buffer_length) | @@ -5288,7 +5288,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> TRB_INTR_TARGET(0); if (urb->transfer_buffer_length > 0) { if (setup->bRequestType & USB_DIR_IN) -@@ -3731,6 +3808,9 @@ +@@ -3731,6 +3808,9 @@ static int xhci_queue_isoc_tx(struct xhc bool more_trbs_coming; struct xhci_virt_ep *xep; @@ -5298,7 +5298,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xep = &xhci->devs[slot_id]->eps[ep_index]; ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; -@@ -3744,6 +3824,21 @@ +@@ -3744,6 +3824,21 @@ static int xhci_queue_isoc_tx(struct xhc start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; @@ -5320,7 +5320,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> urb_priv = urb->hcpriv; /* Queue the first TRB, even if it's zero-length */ for (i = 0; i < num_tds; i++) { -@@ -3828,9 +3923,13 @@ +@@ -3828,9 +3923,13 @@ static int xhci_queue_isoc_tx(struct xhc } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; @@ -5334,7 +5334,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* Set BEI bit except for the last td */ if (i < num_tds - 1) field |= TRB_BEI; -@@ -3845,6 +3944,7 @@ +@@ -3845,6 +3944,7 @@ static int xhci_queue_isoc_tx(struct xhc trb_buff_len = td_remain_len; /* Set the TRB length, TD size, & interrupter fields. */ @@ -5342,7 +5342,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (xhci->hci_version < 0x100) { remainder = xhci_td_remainder( td_len - running_total); -@@ -3854,6 +3954,10 @@ +@@ -3854,6 +3954,10 @@ static int xhci_queue_isoc_tx(struct xhc total_packet_count, urb, (trbs_per_td - j - 1)); } @@ -5372,7 +5372,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" -@@ -46,6 +56,18 @@ +@@ -46,6 +56,18 @@ static unsigned int quirks; module_param(quirks, uint, S_IRUGO); MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); @@ -5391,7 +5391,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * xhci_handshake - spin reading hc until handshake completes or fails -@@ -198,7 +220,7 @@ +@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci) return ret; } @@ -5400,7 +5400,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> static int xhci_free_msi(struct xhci_hcd *xhci) { int i; -@@ -448,6 +470,11 @@ +@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns "Attempting compliance mode recovery"); hcd = xhci->shared_hcd; @@ -5412,7 +5412,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (hcd->state == HC_STATE_SUSPENDED) usb_hcd_resume_root_hub(hcd); -@@ -495,6 +522,9 @@ +@@ -495,6 +522,9 @@ static bool xhci_compliance_mode_recover { const char *dmi_product_name, *dmi_sys_vendor; @@ -5422,7 +5422,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); if (!dmi_product_name || !dmi_sys_vendor) -@@ -540,6 +570,10 @@ +@@ -540,6 +570,10 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xHCI doesn't need link TRB QUIRK"); } @@ -5433,7 +5433,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init"); -@@ -624,7 +658,11 @@ +@@ -624,7 +658,11 @@ int xhci_run(struct usb_hcd *hcd) "// Set the interrupt modulation register"); temp = readl(&xhci->ir_set->irq_control); temp &= ~ER_IRQ_INTERVAL_MASK; @@ -5445,7 +5445,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> writel(temp, &xhci->ir_set->irq_control); /* Set the HCD state before we enable the irqs */ -@@ -649,6 +687,9 @@ +@@ -649,6 +687,9 @@ int xhci_run(struct usb_hcd *hcd) xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); } @@ -5455,7 +5455,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); return 0; -@@ -1639,6 +1680,14 @@ +@@ -1639,6 +1680,14 @@ int xhci_drop_endpoint(struct usb_hcd *h u32 drop_flag; u32 new_add_flags, new_drop_flags; int ret; @@ -5470,7 +5470,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); if (ret <= 0) -@@ -1688,6 +1737,40 @@ +@@ -1688,6 +1737,40 @@ int xhci_drop_endpoint(struct usb_hcd *h xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); @@ -5511,7 +5511,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", (unsigned int) ep->desc.bEndpointAddress, udev->slot_id, -@@ -1720,6 +1803,19 @@ +@@ -1720,6 +1803,19 @@ int xhci_add_endpoint(struct usb_hcd *hc u32 new_add_flags, new_drop_flags; struct xhci_virt_device *virt_dev; int ret = 0; @@ -5531,7 +5531,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); if (ret <= 0) { -@@ -1783,6 +1879,56 @@ +@@ -1783,6 +1879,56 @@ int xhci_add_endpoint(struct usb_hcd *hc return -ENOMEM; } @@ -5588,7 +5588,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); -@@ -4446,8 +4592,14 @@ +@@ -4446,8 +4592,14 @@ static u16 xhci_call_host_update_timeout u16 *timeout) { if (state == USB3_LPM_U1) @@ -5603,7 +5603,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> return xhci_calculate_u2_timeout(xhci, udev, desc); return USB3_LPM_DISABLED; -@@ -4839,7 +4991,9 @@ +@@ -4839,7 +4991,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, hcd->self.no_sg_constraint = 1; /* XHCI controllers don't stop the ep queue on short packets :| */ @@ -5613,7 +5613,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (usb_hcd_is_primary_hcd(hcd)) { xhci = hcd_to_xhci(hcd); -@@ -4900,6 +5054,10 @@ +@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, return retval; xhci_dbg(xhci, "Reset complete\n"); @@ -5624,7 +5624,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && -@@ -5005,8 +5163,57 @@ +@@ -5005,8 +5163,57 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_LICENSE("GPL"); @@ -5706,7 +5706,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* xHCI PCI Configuration Registers */ #define XHCI_SBRN_OFFSET (0x60) -@@ -1597,8 +1612,12 @@ +@@ -1597,8 +1612,12 @@ struct xhci_hcd { /* Compliance Mode Recovery Data */ struct timer_list comp_mode_recovery_timer; u32 port_status_u0; @@ -5719,7 +5719,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> }; /* Platform specific overrides to generic XHCI hc_driver ops */ -@@ -1763,6 +1782,26 @@ +@@ -1763,6 +1782,26 @@ void xhci_urb_free_priv(struct urb_priv void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); diff --git a/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch b/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch index f163e3cbc6..2b1722e177 100644 --- a/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch +++ b/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch @@ -9,11 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> include/linux/phy.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-) -diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c -index adb48ab..7eb83bd 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c -@@ -843,7 +843,8 @@ void phy_state_machine(struct work_struct *work) +@@ -887,7 +887,8 @@ void phy_state_machine(struct work_struc /* If the link is down, give up on negotiation for now */ if (!phydev->link) { phydev->state = PHY_NOLINK; @@ -23,7 +21,7 @@ index adb48ab..7eb83bd 100644 phydev->adjust_link(phydev->attached_dev); break; } -@@ -923,7 +924,8 @@ void phy_state_machine(struct work_struct *work) +@@ -967,7 +968,8 @@ void phy_state_machine(struct work_struc netif_carrier_on(phydev->attached_dev); } else { phydev->state = PHY_NOLINK; @@ -33,7 +31,7 @@ index adb48ab..7eb83bd 100644 } phydev->adjust_link(phydev->attached_dev); -@@ -935,7 +937,8 @@ void phy_state_machine(struct work_struct *work) +@@ -979,7 +981,8 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; @@ -43,8 +41,6 @@ index adb48ab..7eb83bd 100644 phydev->adjust_link(phydev->attached_dev); do_suspend = true; } -diff --git a/include/linux/phy.h b/include/linux/phy.h -index 4a4e3a0..a260bdc 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -375,6 +375,7 @@ struct phy_device { @@ -55,6 +51,3 @@ index 4a4e3a0..a260bdc 100644 enum phy_state state; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch index 69b2f60986..44a3ed6af7 100644 --- a/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch +++ b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/net/ethernet/Makefile | 1 + 3 files changed, 3 insertions(+) -diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c -index 51f33a5..d7c4ba4 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -199,6 +199,7 @@ void __init ralink_clk_init(void) @@ -24,6 +22,3 @@ index 51f33a5..d7c4ba4 100644 ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000b40.spi", sys_rate); ralink_clk_add("10000100.timer", wdt_rate); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch index 635f60475a..b6189fe096 100644 --- a/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch +++ b/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch @@ -7,11 +7,9 @@ Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c -index c3624eb..60d960a 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -2290,7 +2290,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) +@@ -2291,7 +2291,7 @@ static int __xipram do_erase_chip(struct chip->erase_suspended = 0; } @@ -20,7 +18,7 @@ index c3624eb..60d960a 100644 break; if (time_after(jiffies, timeo)) { -@@ -2379,7 +2379,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, +@@ -2380,7 +2380,7 @@ static int __xipram do_erase_oneblock(st chip->erase_suspended = 0; } @@ -29,6 +27,3 @@ index c3624eb..60d960a 100644 xip_enable(map, chip, adr); break; } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch index 7c1ea22a6b..8f274bca15 100644 --- a/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch +++ b/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch @@ -7,8 +7,6 @@ Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) -diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c -index 60d960a..a663e3b 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -40,7 +40,7 @@ @@ -30,7 +28,7 @@ index 60d960a..a663e3b 100644 static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); static void cfi_amdstd_sync (struct mtd_info *); -@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd) +@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m } #endif @@ -38,7 +36,7 @@ index 60d960a..a663e3b 100644 static void fixup_use_write_buffers(struct mtd_info *mtd) { struct map_info *map = mtd->priv; -@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) +@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru mtd->_write = cfi_amdstd_write_buffers; } } @@ -46,7 +44,7 @@ index 60d960a..a663e3b 100644 /* Atmel chips don't use the same PRI format as AMD chips */ static void fixup_convert_atmel_pri(struct mtd_info *mtd) -@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, +@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct /* * FIXME: interleaved mode not tested, and probably not supported! */ @@ -54,7 +52,7 @@ index 60d960a..a663e3b 100644 static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, unsigned long adr, const u_char *buf, int len) -@@ -1916,7 +1921,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, +@@ -1917,7 +1922,6 @@ static int __xipram do_write_buffer(stru return ret; } @@ -62,7 +60,7 @@ index 60d960a..a663e3b 100644 static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { -@@ -1991,6 +1995,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, +@@ -1992,6 +1996,7 @@ static int cfi_amdstd_write_buffers(stru return 0; } @@ -70,6 +68,3 @@ index 60d960a..a663e3b 100644 /* * Wait for the flash chip to become ready to write data --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch index a381e21419..0bf9043168 100644 --- a/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch +++ b/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch @@ -13,8 +13,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/mtd/maps/ralink_nand.c create mode 100644 drivers/mtd/maps/ralink_nand.h -diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig -index 7c95a65..c2739db 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -399,4 +399,8 @@ config MTD_LATCH_ADDR @@ -26,8 +24,6 @@ index 7c95a65..c2739db 100644 + depends on RALINK && SOC_MT7620 + endmenu -diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile -index 141c91a..94d2aa0 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o @@ -36,9 +32,6 @@ index 141c91a..94d2aa0 100644 obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o +obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o + -diff --git a/drivers/mtd/maps/ralink_nand.c b/drivers/mtd/maps/ralink_nand.c -new file mode 100644 -index 0000000..64f9119 --- /dev/null +++ b/drivers/mtd/maps/ralink_nand.c @@ -0,0 +1,2136 @@ @@ -2178,9 +2171,6 @@ index 0000000..64f9119 + + +MODULE_LICENSE("GPL"); -diff --git a/drivers/mtd/maps/ralink_nand.h b/drivers/mtd/maps/ralink_nand.h -new file mode 100644 -index 0000000..a408ae9 --- /dev/null +++ b/drivers/mtd/maps/ralink_nand.h @@ -0,0 +1,232 @@ @@ -2416,6 +2406,3 @@ index 0000000..a408ae9 + + +#endif --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch index b84e666ed7..a16be7356d 100644 --- a/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch +++ b/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch @@ -29,8 +29,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/mtd/nand/nand_device_list.h create mode 100644 drivers/mtd/nand/partition.h -diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig -index 3324281..76cfc97 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -535,4 +535,10 @@ config MTD_NAND_HISI504 @@ -44,20 +42,15 @@ index 3324281..76cfc97 100644 + select MTD_NAND_ECC + endif # MTD_NAND -diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile -index 075a027..ec349e3 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile -@@ -54,5 +54,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ +@@ -54,5 +54,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ +obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o nand-objs := nand_base.o nand_bbt.o nand_timings.o -diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c -new file mode 100644 -index 0000000..0462871 --- /dev/null +++ b/drivers/mtd/nand/bmt.c @@ -0,0 +1,750 @@ @@ -811,9 +804,6 @@ index 0000000..0462871 +MODULE_AUTHOR("MediaTek"); +MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver"); +#endif -diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h -new file mode 100644 -index 0000000..2d30ea9 --- /dev/null +++ b/drivers/mtd/nand/bmt.h @@ -0,0 +1,80 @@ @@ -897,9 +887,6 @@ index 0000000..2d30ea9 +unsigned short get_mapping_block_index(int index); + +#endif // #ifndef __BMT_H__ -diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c -new file mode 100644 -index 0000000..9fb5235 --- /dev/null +++ b/drivers/mtd/nand/dev-nand.c @@ -0,0 +1,63 @@ @@ -966,9 +953,6 @@ index 0000000..9fb5235 + return retval; +} +arch_initcall(mtk_nand_register); -diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h -new file mode 100644 -index 0000000..a7b9647 --- /dev/null +++ b/drivers/mtd/nand/mt6575_typedefs.h @@ -0,0 +1,340 @@ @@ -1312,9 +1296,6 @@ index 0000000..a7b9647 + +#endif // _MT6575_TYPEDEFS_H + -diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c -new file mode 100644 -index 0000000..00e150c --- /dev/null +++ b/drivers/mtd/nand/mtk_nand.c @@ -0,0 +1,2304 @@ @@ -3622,9 +3603,6 @@ index 0000000..00e150c +module_init(mtk_nand_init); +module_exit(mtk_nand_exit); +MODULE_LICENSE("GPL"); -diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h -new file mode 100644 -index 0000000..6db88c4 --- /dev/null +++ b/drivers/mtd/nand/mtk_nand.h @@ -0,0 +1,452 @@ @@ -4080,11 +4058,9 @@ index 0000000..6db88c4 +extern u32 CFG_BLOCKSIZE; +#endif +#endif -diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c -index ceb68ca..04dbc69 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c -@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = { +@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_12 .length = 78} } }; @@ -4093,7 +4069,7 @@ index ceb68ca..04dbc69 100644 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); -@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_info *mtd, +@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_inf * * Release chip lock and wake up anyone waiting on the device. */ @@ -4102,7 +4078,7 @@ index ceb68ca..04dbc69 100644 { struct nand_chip *chip = mtd->priv; -@@ -820,7 +820,7 @@ static void panic_nand_get_device(struct nand_chip *chip, +@@ -820,7 +820,7 @@ static void panic_nand_get_device(struct * * Get the device and lock it for exclusive access */ @@ -4111,11 +4087,9 @@ index ceb68ca..04dbc69 100644 nand_get_device(struct mtd_info *mtd, int new_state) { struct nand_chip *chip = mtd->priv; -diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c -index 63a1a36..d036b9a 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c -@@ -1374,4 +1374,23 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) +@@ -1374,4 +1374,23 @@ int nand_markbad_bbt(struct mtd_info *mt return ret; } @@ -4139,9 +4113,6 @@ index 63a1a36..d036b9a 100644 +} + EXPORT_SYMBOL(nand_scan_bbt); -diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h -new file mode 100644 -index 0000000..82e957d --- /dev/null +++ b/drivers/mtd/nand/nand_def.h @@ -0,0 +1,123 @@ @@ -4268,9 +4239,6 @@ index 0000000..82e957d +#include "mt6575_typedefs.h" + +#endif /* __NAND_DEF_H__ */ -diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h -new file mode 100644 -index 0000000..4c36b3a --- /dev/null +++ b/drivers/mtd/nand/nand_device_list.h @@ -0,0 +1,55 @@ @@ -4329,9 +4297,6 @@ index 0000000..4c36b3a + + +#endif -diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h -new file mode 100644 -index 0000000..034e1af --- /dev/null +++ b/drivers/mtd/nand/partition.h @@ -0,0 +1,115 @@ @@ -4450,6 +4415,3 @@ index 0000000..034e1af +//#endif +#undef RECONFIG_PARTITION_SIZE + --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch b/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch index 51fd8ee6a4..78d607e7f0 100644 --- a/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch +++ b/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> include/linux/mtd/nand.h | 4 ++++ 4 files changed, 44 insertions(+), 5 deletions(-) -diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c -index 00e150c..808e9c3 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -110,6 +110,10 @@ int part_num = NUM_PARTITIONS; @@ -26,7 +24,7 @@ index 00e150c..808e9c3 100644 static u8 local_oob_buf[NAND_MAX_OOBSIZE]; static u8 nand_badblock_offset = 0; -@@ -348,7 +352,7 @@ mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u3 +@@ -348,7 +352,7 @@ mtk_nand_check_bch_error(struct mtd_info if (0xF == u4ErrNum) { mtd->ecc_stats.failed++; bRet = false; @@ -35,7 +33,7 @@ index 00e150c..808e9c3 100644 } else { for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) { au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i); -@@ -1422,7 +1426,7 @@ mtk_nand_erase_hw(struct mtd_info *mtd, int page) +@@ -1422,7 +1426,7 @@ mtk_nand_erase_hw(struct mtd_info *mtd, { struct nand_chip *chip = (struct nand_chip *)mtd->priv; @@ -44,7 +42,7 @@ index 00e150c..808e9c3 100644 return chip->waitfunc(mtd, chip); } -@@ -2094,8 +2098,8 @@ mtk_nand_probe(struct platform_device *pdev) +@@ -2094,8 +2098,8 @@ mtk_nand_probe(struct platform_device *p nand_chip->write_page = mtk_nand_write_page; nand_chip->ecc.write_oob = mtk_nand_write_oob; nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device(). @@ -55,7 +53,7 @@ index 00e150c..808e9c3 100644 nand_chip->ecc.read_oob = mtk_nand_read_oob; nand_chip->block_bad = mtk_nand_block_bad; -@@ -2175,6 +2179,21 @@ mtk_nand_probe(struct platform_device *pdev) +@@ -2175,6 +2179,21 @@ mtk_nand_probe(struct platform_device *p nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1; nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1; nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1; @@ -87,7 +85,7 @@ index 00e150c..808e9c3 100644 kfree(host); nand_disable_clock(); return err; -@@ -2261,8 +2283,12 @@ mtk_nand_remove(struct platform_device *pdev) +@@ -2261,8 +2283,12 @@ mtk_nand_remove(struct platform_device * { struct mtk_nand_host *host = platform_get_drvdata(pdev); struct mtd_info *mtd = &host->mtd; @@ -100,11 +98,9 @@ index 00e150c..808e9c3 100644 kfree(host); nand_disable_clock(); -diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c -index 04dbc69..c5ed6fc 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c -@@ -1592,6 +1592,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, +@@ -1592,6 +1592,9 @@ static int nand_do_read_ops(struct mtd_i __func__, buf); read_retry: @@ -122,7 +118,7 @@ index 04dbc69..c5ed6fc 100644 if (ret < 0) { if (use_bufpoi) /* Invalidate page cache */ -@@ -2786,8 +2790,11 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, +@@ -2786,8 +2790,11 @@ int nand_erase_nand(struct mtd_info *mtd if (page <= chip->pagebuf && chip->pagebuf < (page + pages_per_block)) chip->pagebuf = -1; @@ -135,11 +131,9 @@ index 04dbc69..c5ed6fc 100644 /* * See if operation failed and additional status checks are -diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h -index 4c36b3a..267fd0c 100644 --- a/drivers/mtd/nand/nand_device_list.h +++ b/drivers/mtd/nand/nand_device_list.h -@@ -43,6 +43,8 @@ static const flashdev_info gen_FlashTable[]={ +@@ -43,6 +43,8 @@ static const flashdev_info gen_FlashTabl {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0}, {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0}, {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0}, @@ -148,8 +142,6 @@ index 4c36b3a..267fd0c 100644 {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0}, {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0}, {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0}, -diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h -index 272f429..b633b84 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -671,6 +671,10 @@ struct nand_chip { @@ -163,6 +155,3 @@ index 272f429..b633b84 100644 int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch index 100465f1fa..e2643e3f25 100644 --- a/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch +++ b/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch @@ -11,9 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt -diff --git a/Documentation/devicetree/bindings/spi/spi-rt2880.txt b/Documentation/devicetree/bindings/spi/spi-rt2880.txt -new file mode 100644 -index 0000000..068bc90 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt @@ -0,0 +1,28 @@ @@ -45,6 +42,3 @@ index 0000000..068bc90 + }; + }; + --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch index 92438ff424..596bd83e5b 100644 --- a/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ b/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -14,11 +14,9 @@ Acked-by: John Crispin <blogic@openwrt.org> 3 files changed, 537 insertions(+) create mode 100644 drivers/spi/spi-rt2880.c -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index 4887f31..7c592ce 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -457,6 +457,12 @@ config SPI_QUP +@@ -466,6 +466,12 @@ config SPI_QUP This driver can also be built as a module. If so, the module will be called spi_qup. @@ -31,11 +29,9 @@ index 4887f31..7c592ce 100644 config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" depends on ARCH_S3C24XX -diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile -index 6a7f6f9..3d690ef 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile -@@ -68,6 +68,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o +@@ -69,6 +69,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o obj-$(CONFIG_SPI_RSPI) += spi-rspi.o @@ -43,9 +39,6 @@ index 6a7f6f9..3d690ef 100644 obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o -diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c -new file mode 100644 -index 0000000..c286c94 --- /dev/null +++ b/drivers/spi/spi-rt2880.c @@ -0,0 +1,530 @@ @@ -579,6 +572,3 @@ index 0000000..c286c94 +MODULE_AUTHOR("Sergiy <piratfm@gmail.com>"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_LICENSE("GPL"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch index 716168f101..eab30ae1e1 100644 --- a/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch +++ b/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 487 insertions(+) create mode 100644 drivers/spi/spi-mt7621.c -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index 7c592ce..2f05c85 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -463,6 +463,12 @@ config SPI_RT2880 +@@ -472,6 +472,12 @@ config SPI_RT2880 help This selects a driver for the Ralink RT288x/RT305x SPI Controller. @@ -28,11 +26,9 @@ index 7c592ce..2f05c85 100644 config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" depends on ARCH_S3C24XX -diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile -index 3d690ef..5389710 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile -@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o +@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o @@ -40,9 +36,6 @@ index 3d690ef..5389710 100644 obj-$(CONFIG_SPI_MXS) += spi-mxs.o obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o -diff --git a/drivers/spi/spi-mt7621.c b/drivers/spi/spi-mt7621.c -new file mode 100644 -index 0000000..dedf4a1 --- /dev/null +++ b/drivers/spi/spi-mt7621.c @@ -0,0 +1,480 @@ @@ -526,6 +519,3 @@ index 0000000..dedf4a1 +MODULE_DESCRIPTION("MT7621 SPI driver"); +MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>"); +MODULE_LICENSE("GPL"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch index f600bd570e..30108fb6d9 100644 --- a/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch +++ b/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -13,9 +13,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt create mode 100644 drivers/i2c/busses/i2c-ralink.c -diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt -new file mode 100644 -index 0000000..8fa8ac3 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt @@ -0,0 +1,27 @@ @@ -46,8 +43,6 @@ index 0000000..8fa8ac3 + }; + }; +}; -diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig -index 08b8617..53d565b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -803,6 +803,10 @@ config I2C_RK3X @@ -61,8 +56,6 @@ index 08b8617..53d565b 100644 config HAVE_S3C2410_I2C bool help -diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile -index 6df3b30..2edd32c 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o @@ -73,9 +66,6 @@ index 6df3b30..2edd32c 100644 obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o -diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c -new file mode 100644 -index 0000000..debfb18 --- /dev/null +++ b/drivers/i2c/busses/i2c-ralink.c @@ -0,0 +1,327 @@ @@ -406,6 +396,3 @@ index 0000000..debfb18 +MODULE_DESCRIPTION("Ralink I2c host driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:Ralink-I2C"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch b/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch index 17ff8d2bb2..dc961fab34 100644 --- a/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch +++ b/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 308 insertions(+) create mode 100644 drivers/i2c/busses/i2c-mt7621.c -diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig -index 53d565b..073bfe3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -807,6 +807,10 @@ config I2C_RALINK @@ -26,8 +24,6 @@ index 53d565b..073bfe3 100644 config HAVE_S3C2410_I2C bool help -diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile -index 2edd32c..764e16e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o @@ -38,9 +34,6 @@ index 2edd32c..764e16e 100644 obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o -diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c -new file mode 100644 -index 0000000..646ca40 --- /dev/null +++ b/drivers/i2c/busses/i2c-mt7621.c @@ -0,0 +1,303 @@ @@ -347,6 +340,3 @@ index 0000000..646ca40 +MODULE_DESCRIPTION("MT7621 I2c host driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:MT7621-I2C"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch index dac572f336..079ce4a3f9 100644 --- a/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -23,18 +23,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h create mode 100644 drivers/mmc/host/mtk-mmc/sd.c -diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig -index 8a1e349..47833d1 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -793,3 +793,5 @@ config MMC_MTK +@@ -818,3 +818,5 @@ config MMC_MTK If you have a machine with a integrated SD/MMC card reader, say Y or M here. This is needed if support for any SD/SDIO/MMC devices is required. If unsure, say N. + +source "drivers/mmc/host/mtk-mmc/Kconfig" -diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile -index 4f3452a..69dd05f 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -2,6 +2,7 @@ @@ -45,9 +41,6 @@ index 4f3452a..69dd05f 100644 obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o obj-$(CONFIG_MMC_PXA) += pxamci.o -diff --git a/drivers/mmc/host/mtk-mmc/Kconfig b/drivers/mmc/host/mtk-mmc/Kconfig -new file mode 100644 -index 0000000..a58b0f3 --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/Kconfig @@ -0,0 +1,16 @@ @@ -67,9 +60,6 @@ index 0000000..a58b0f3 + bool "eMMC 8-bit support" + depends on MTK_MMC && RALINK_MT7628 + -diff --git a/drivers/mmc/host/mtk-mmc/Makefile b/drivers/mmc/host/mtk-mmc/Makefile -new file mode 100644 -index 0000000..caead0b --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/Makefile @@ -0,0 +1,42 @@ @@ -115,9 +105,6 @@ index 0000000..caead0b + +clean: + @rm -f *.o modules.order .*.cmd -diff --git a/drivers/mmc/host/mtk-mmc/board.h b/drivers/mmc/host/mtk-mmc/board.h -new file mode 100644 -index 0000000..33bfc7b --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/board.h @@ -0,0 +1,137 @@ @@ -258,9 +245,6 @@ index 0000000..33bfc7b + +#endif /* __ARCH_ARM_MACH_BOARD_H */ + -diff --git a/drivers/mmc/host/mtk-mmc/dbg.c b/drivers/mmc/host/mtk-mmc/dbg.c -new file mode 100644 -index 0000000..4dc115b --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/dbg.c @@ -0,0 +1,347 @@ @@ -611,9 +595,6 @@ index 0000000..4dc115b +} +EXPORT_SYMBOL_GPL(msdc_debug_proc_init); +#endif -diff --git a/drivers/mmc/host/mtk-mmc/dbg.h b/drivers/mmc/host/mtk-mmc/dbg.h -new file mode 100644 -index 0000000..e58c431 --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/dbg.h @@ -0,0 +1,156 @@ @@ -773,9 +754,6 @@ index 0000000..e58c431 +void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks); + +#endif -diff --git a/drivers/mmc/host/mtk-mmc/mt6575_sd.h b/drivers/mmc/host/mtk-mmc/mt6575_sd.h -new file mode 100644 -index 0000000..e90c4f1 --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/mt6575_sd.h @@ -0,0 +1,1001 @@ @@ -1780,9 +1758,6 @@ index 0000000..e90c4f1 + +#endif + -diff --git a/drivers/mmc/host/mtk-mmc/sd.c b/drivers/mmc/host/mtk-mmc/sd.c -new file mode 100644 -index 0000000..d240b46 --- /dev/null +++ b/drivers/mmc/host/mtk-mmc/sd.c @@ -0,0 +1,3060 @@ @@ -4846,6 +4821,3 @@ index 0000000..d240b46 +MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>"); + +EXPORT_SYMBOL(msdc_6575_host); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch index 55a6b0a3d4..3362d4b5fc 100644 --- a/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch +++ b/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch @@ -12,8 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 4 files changed, 585 insertions(+) create mode 100644 drivers/dma/ralink-gdma.c -diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig -index b458475..2d5ae4a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -40,6 +40,12 @@ config ASYNC_TX_ENABLE_CHANNEL_SWITCH @@ -29,20 +27,15 @@ index b458475..2d5ae4a 100644 config DMA_ENGINE bool -diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile -index 7711a71..b33c434 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile -@@ -65,5 +65,6 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o +@@ -65,5 +65,6 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma- obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_XGENE_DMA) += xgene-dma.o obj-$(CONFIG_ZX_DMA) += zx296702_dma.o +obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o obj-y += xilinx/ -diff --git a/drivers/dma/ralink-gdma.c b/drivers/dma/ralink-gdma.c -new file mode 100644 -index 0000000..2c3cace --- /dev/null +++ b/drivers/dma/ralink-gdma.c @@ -0,0 +1,577 @@ @@ -623,11 +616,9 @@ index 0000000..2c3cace +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("GDMA4740 DMA driver"); +MODULE_LICENSE("GPLv2"); -diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h -index 7ea9184..d371bf1 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h -@@ -496,6 +496,7 @@ static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx, +@@ -496,6 +496,7 @@ static inline void dma_set_unmap(struct struct dmaengine_unmap_data * dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags); void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap); @@ -635,6 +626,3 @@ index 7ea9184..d371bf1 100644 #else static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx, struct dmaengine_unmap_data *unmap) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch index 004eb68101..e329c316d7 100644 --- a/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch +++ b/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch @@ -18,8 +18,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 sound/soc/ralink/mt7620-i2s.c create mode 100644 sound/soc/ralink/mt7620-wm8960.c -diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c -index da85bbf..371baa5 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -15,6 +15,7 @@ @@ -38,8 +36,6 @@ index da85bbf..371baa5 100644 __iomem void *rt_memc_membase; __iomem void *plat_of_remap_node(const char *node) -diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig -index 225bfda..76ce95c 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -53,6 +53,7 @@ source "sound/soc/mxs/Kconfig" @@ -50,8 +46,6 @@ index 225bfda..76ce95c 100644 source "sound/soc/samsung/Kconfig" source "sound/soc/sh/Kconfig" source "sound/soc/sirf/Kconfig" -diff --git a/sound/soc/Makefile b/sound/soc/Makefile -index 134aca1..e9d8e0e 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/ @@ -62,9 +56,6 @@ index 134aca1..e9d8e0e 100644 obj-$(CONFIG_SND_SOC) += samsung/ obj-$(CONFIG_SND_SOC) += sh/ obj-$(CONFIG_SND_SOC) += sirf/ -diff --git a/sound/soc/ralink/Kconfig b/sound/soc/ralink/Kconfig -new file mode 100644 -index 0000000..d462622 --- /dev/null +++ b/sound/soc/ralink/Kconfig @@ -0,0 +1,15 @@ @@ -83,9 +74,6 @@ index 0000000..d462622 + help + Say Y if you want to add support for ASoC audio on the Qi LB60 board + a.k.a Qi Ben NanoNote. -diff --git a/sound/soc/ralink/Makefile b/sound/soc/ralink/Makefile -new file mode 100644 -index 0000000..3d79980 --- /dev/null +++ b/sound/soc/ralink/Makefile @@ -0,0 +1,11 @@ @@ -100,9 +88,6 @@ index 0000000..3d79980 +snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o + +obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o -diff --git a/sound/soc/ralink/mt7620-i2s.c b/sound/soc/ralink/mt7620-i2s.c -new file mode 100644 -index 0000000..2ce9b21 --- /dev/null +++ b/sound/soc/ralink/mt7620-i2s.c @@ -0,0 +1,436 @@ @@ -542,9 +527,6 @@ index 0000000..2ce9b21 +MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mt7620-i2s"); -diff --git a/sound/soc/ralink/mt7620-wm8960.c b/sound/soc/ralink/mt7620-wm8960.c -new file mode 100644 -index 0000000..3389988 --- /dev/null +++ b/sound/soc/ralink/mt7620-wm8960.c @@ -0,0 +1,233 @@ @@ -781,6 +763,3 @@ index 0000000..3389988 +MODULE_DESCRIPTION("Freescale i.MX WM8962 ASoC machine driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:mt7620-wm8962"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch index 0d410bb28a..e1127dc2d4 100644 --- a/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch +++ b/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch @@ -11,11 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 193 insertions(+) create mode 100644 drivers/watchdog/mt7621_wdt.c -diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig -index 79e1aa1..0710aa1 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -1337,6 +1337,13 @@ config RALINK_WDT +@@ -1346,6 +1346,13 @@ config RALINK_WDT help Hardware driver for the Ralink SoC Watchdog Timer. @@ -29,11 +27,9 @@ index 79e1aa1..0710aa1 100644 # PARISC Architecture # POWERPC Architecture -diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile -index 0c616e3..4d3b4b1 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -68,6 +68,7 @@ obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o +@@ -68,6 +68,7 @@ obj-$(CONFIG_MESON_WATCHDOG) += meson_wd obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o @@ -41,9 +37,6 @@ index 0c616e3..4d3b4b1 100644 # AVR32 Architecture obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o -diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c -new file mode 100644 -index 0000000..ec2c897 --- /dev/null +++ b/drivers/watchdog/mt7621_wdt.c @@ -0,0 +1,185 @@ @@ -232,6 +225,3 @@ index 0000000..ec2c897 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch b/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch index 1048396231..c6fe92c158 100644 --- a/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch +++ b/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch @@ -41,8 +41,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 sound/soc/mtk/ralink_gdma.c create mode 100644 sound/soc/mtk/ralink_gdma.h -diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig -index 76ce95c..09aa2c7 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -64,6 +64,7 @@ source "sound/soc/txx9/Kconfig" @@ -53,8 +51,6 @@ index 76ce95c..09aa2c7 100644 # Supported codecs source "sound/soc/codecs/Kconfig" -diff --git a/sound/soc/Makefile b/sound/soc/Makefile -index e9d8e0e..a3c6b43 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -46,3 +46,4 @@ obj-$(CONFIG_SND_SOC) += txx9/ @@ -62,8 +58,6 @@ index e9d8e0e..a3c6b43 100644 obj-$(CONFIG_SND_SOC) += xtensa/ obj-$(CONFIG_SND_SOC) += zte/ +obj-$(CONFIG_SND_SOC) += mtk/ -diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig -index 0c9733e..276a4c5 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -816,7 +816,7 @@ config SND_SOC_WM8955 @@ -75,8 +69,6 @@ index 0c9733e..276a4c5 100644 config SND_SOC_WM8961 tristate -diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c -index dbd8840..3118f5c 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -27,6 +27,7 @@ @@ -87,7 +79,7 @@ index dbd8840..3118f5c 100644 /* R25 - Power 1 */ #define WM8960_VMID_MASK 0x180 -@@ -57,10 +58,10 @@ static int wm8960_set_pll(struct snd_soc_codec *codec, +@@ -57,10 +58,10 @@ static int wm8960_set_pll(struct snd_soc * using 2 wire for device control, so we cache them instead. */ static const struct reg_default wm8960_reg_defaults[] = { @@ -102,7 +94,7 @@ index dbd8840..3118f5c 100644 { 0x4, 0x0000 }, { 0x5, 0x0008 }, { 0x6, 0x0000 }, -@@ -92,8 +93,8 @@ static const struct reg_default wm8960_reg_defaults[] = { +@@ -92,8 +93,8 @@ static const struct reg_default wm8960_r { 0x25, 0x0050 }, { 0x26, 0x0000 }, { 0x27, 0x0000 }, @@ -129,7 +121,7 @@ index dbd8840..3118f5c 100644 /* enumerated controls */ static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted", -@@ -192,8 +201,8 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol, +@@ -192,8 +201,8 @@ static int wm8960_get_deemph(struct snd_ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); @@ -140,7 +132,7 @@ index dbd8840..3118f5c 100644 } static int wm8960_put_deemph(struct snd_kcontrol *kcontrol, -@@ -211,6 +220,71 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol, +@@ -211,6 +220,71 @@ static int wm8960_put_deemph(struct snd_ return wm8960_set_deemph(codec); } @@ -212,7 +204,7 @@ index dbd8840..3118f5c 100644 static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1); static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); -@@ -563,6 +637,7 @@ static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai, +@@ -563,6 +637,7 @@ static int wm8960_set_dai_fmt(struct snd /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); @@ -220,7 +212,7 @@ index dbd8840..3118f5c 100644 return 0; } -@@ -809,9 +884,10 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, +@@ -809,9 +884,10 @@ static int wm8960_set_bias_level_out3(st ret = wm8960_configure_clocking(codec); if (ret) return ret; @@ -232,7 +224,7 @@ index dbd8840..3118f5c 100644 break; case SND_SOC_BIAS_ON: -@@ -852,12 +928,16 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, +@@ -852,12 +928,16 @@ static int wm8960_set_bias_level_out3(st /* Disable anti-pop features */ snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN); } @@ -250,7 +242,7 @@ index dbd8840..3118f5c 100644 /* Enable anti-pop features */ snd_soc_write(codec, WM8960_APOP1, WM8960_POBCTRL | WM8960_SOFT_ST | -@@ -866,6 +946,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, +@@ -866,6 +946,7 @@ static int wm8960_set_bias_level_out3(st /* Disable VMID and VREF, let them discharge */ snd_soc_write(codec, WM8960_POWER1, 0); msleep(600); @@ -258,24 +250,24 @@ index dbd8840..3118f5c 100644 break; } -@@ -1101,10 +1182,15 @@ static int wm8960_set_pll(struct snd_soc_codec *codec, +@@ -1101,10 +1182,15 @@ static int wm8960_set_pll(struct snd_soc if (pll_div.k) { reg |= 0x20; - +#if 1 - snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff); - snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff); - snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff); -+#else + snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff); + snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff); + snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff); ++#else + snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff); + snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff); + snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff); +#endif } snd_soc_write(codec, WM8960_PLL1, reg); -@@ -1150,7 +1236,11 @@ static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, +@@ -1150,7 +1236,11 @@ static int wm8960_set_dai_clkdiv(struct snd_soc_write(codec, WM8960_PLL1, reg | div); break; case WM8960_DCLKDIV: @@ -287,7 +279,7 @@ index dbd8840..3118f5c 100644 snd_soc_write(codec, WM8960_CLOCK2, reg | div); break; case WM8960_TOCLKSEL: -@@ -1285,7 +1375,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, +@@ -1285,7 +1375,7 @@ static int wm8960_i2c_probe(struct i2c_c { struct wm8960_data *pdata = dev_get_platdata(&i2c->dev); struct wm8960_priv *wm8960; @@ -296,7 +288,7 @@ index dbd8840..3118f5c 100644 wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv), GFP_KERNEL); -@@ -1307,11 +1397,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c, +@@ -1307,11 +1397,7 @@ static int wm8960_i2c_probe(struct i2c_c else if (i2c->dev.of_node) wm8960_set_pdata_from_of(i2c, &wm8960->pdata); @@ -309,8 +301,6 @@ index dbd8840..3118f5c 100644 if (wm8960->pdata.shared_lrclk) { ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2, -diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h -index ab3220d..5205deb 100644 --- a/sound/soc/codecs/wm8960.h +++ b/sound/soc/codecs/wm8960.h @@ -111,4 +111,68 @@ @@ -382,9 +372,6 @@ index ab3220d..5205deb 100644 +#define RINV_RINVOL(x) ((x) & 0x3f) + #endif -diff --git a/sound/soc/mtk/Kconfig b/sound/soc/mtk/Kconfig -new file mode 100644 -index 0000000..26d2531 --- /dev/null +++ b/sound/soc/mtk/Kconfig @@ -0,0 +1,35 @@ @@ -423,9 +410,6 @@ index 0000000..26d2531 + tristate "MTK SoC I2S Support" + depends on SND_MT76XX_SOC + -diff --git a/sound/soc/mtk/Makefile b/sound/soc/mtk/Makefile -new file mode 100644 -index 0000000..00b3dff --- /dev/null +++ b/sound/soc/mtk/Makefile @@ -0,0 +1,39 @@ @@ -468,9 +452,6 @@ index 0000000..00b3dff + + + -diff --git a/sound/soc/mtk/i2c_wm8960.c b/sound/soc/mtk/i2c_wm8960.c -new file mode 100644 -index 0000000..70f16e1 --- /dev/null +++ b/sound/soc/mtk/i2c_wm8960.c @@ -0,0 +1,492 @@ @@ -966,9 +947,6 @@ index 0000000..70f16e1 +MODULE_DESCRIPTION("WM8960 I2C client driver"); +MODULE_LICENSE("GPL"); + -diff --git a/sound/soc/mtk/i2c_wm8960.h b/sound/soc/mtk/i2c_wm8960.h -new file mode 100644 -index 0000000..c769345 --- /dev/null +++ b/sound/soc/mtk/i2c_wm8960.h @@ -0,0 +1,288 @@ @@ -1260,9 +1238,6 @@ index 0000000..c769345 +void audiohw_bypass(void); + +#endif /* _WM875x_H */ -diff --git a/sound/soc/mtk/i2s_ctrl.c b/sound/soc/mtk/i2s_ctrl.c -new file mode 100644 -index 0000000..05034b0 --- /dev/null +++ b/sound/soc/mtk/i2s_ctrl.c @@ -0,0 +1,3524 @@ @@ -4790,9 +4765,6 @@ index 0000000..05034b0 +#else +module_param (i2sdrv_major, int, 0); +#endif -diff --git a/sound/soc/mtk/i2s_ctrl.h b/sound/soc/mtk/i2s_ctrl.h -new file mode 100644 -index 0000000..b762c9c --- /dev/null +++ b/sound/soc/mtk/i2s_ctrl.h @@ -0,0 +1,523 @@ @@ -5319,9 +5291,6 @@ index 0000000..b762c9c + +#endif /* __RALINK_I2S_H_ */ + -diff --git a/sound/soc/mtk/i2s_debug.c b/sound/soc/mtk/i2s_debug.c -new file mode 100644 -index 0000000..9f61b14 --- /dev/null +++ b/sound/soc/mtk/i2s_debug.c @@ -0,0 +1,698 @@ @@ -6023,9 +5992,6 @@ index 0000000..9f61b14 + + return 0; +} -diff --git a/sound/soc/mtk/mt76xx_i2s.c b/sound/soc/mtk/mt76xx_i2s.c -new file mode 100644 -index 0000000..7615b51 --- /dev/null +++ b/sound/soc/mtk/mt76xx_i2s.c @@ -0,0 +1,304 @@ @@ -6333,9 +6299,6 @@ index 0000000..7615b51 +MODULE_DESCRIPTION("Stretch MT76xx I2S Interface"); +MODULE_LICENSE("GPL"); +#endif -diff --git a/sound/soc/mtk/mt76xx_i2s.h b/sound/soc/mtk/mt76xx_i2s.h -new file mode 100644 -index 0000000..9ae0e50 --- /dev/null +++ b/sound/soc/mtk/mt76xx_i2s.h @@ -0,0 +1,18 @@ @@ -6357,9 +6320,6 @@ index 0000000..9ae0e50 + +#include "i2s_ctrl.h" +#endif /* MTK_I2S_H_ */ -diff --git a/sound/soc/mtk/mt76xx_machine.c b/sound/soc/mtk/mt76xx_machine.c -new file mode 100644 -index 0000000..00d2145 --- /dev/null +++ b/sound/soc/mtk/mt76xx_machine.c @@ -0,0 +1,317 @@ @@ -6680,9 +6640,6 @@ index 0000000..00d2145 +module_exit(mt76xx_machine_exit); +//EXPORT_SYMBOL_GPL(mt76xx_soc_platform); +MODULE_LICENSE("GPL"); -diff --git a/sound/soc/mtk/mt76xx_machine.h b/sound/soc/mtk/mt76xx_machine.h -new file mode 100644 -index 0000000..79532b5 --- /dev/null +++ b/sound/soc/mtk/mt76xx_machine.h @@ -0,0 +1,21 @@ @@ -6707,9 +6664,6 @@ index 0000000..79532b5 +#endif + +#endif /* MT76XX_MACHINE_H_ */ -diff --git a/sound/soc/mtk/mt76xx_pcm.c b/sound/soc/mtk/mt76xx_pcm.c -new file mode 100644 -index 0000000..1100ee0 --- /dev/null +++ b/sound/soc/mtk/mt76xx_pcm.c @@ -0,0 +1,499 @@ @@ -7212,9 +7166,6 @@ index 0000000..1100ee0 +MODULE_DESCRIPTION("MTK APSoC I2S DMA driver"); +MODULE_LICENSE("GPL"); + -diff --git a/sound/soc/mtk/ralink_gdma.c b/sound/soc/mtk/ralink_gdma.c -new file mode 100644 -index 0000000..b385f05 --- /dev/null +++ b/sound/soc/mtk/ralink_gdma.c @@ -0,0 +1,918 @@ @@ -8136,9 +8087,6 @@ index 0000000..b385f05 +MODULE_AUTHOR("Steven Liu <steven_liu@ralinktech.com.tw>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(MOD_VERSION); -diff --git a/sound/soc/mtk/ralink_gdma.h b/sound/soc/mtk/ralink_gdma.h -new file mode 100644 -index 0000000..95ce5f7 --- /dev/null +++ b/sound/soc/mtk/ralink_gdma.h @@ -0,0 +1,326 @@ @@ -8468,11 +8416,9 @@ index 0000000..95ce5f7 + + +#endif -diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c -index 6173d15..d9c52a7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c -@@ -1758,7 +1758,8 @@ static int soc_probe(struct platform_device *pdev) +@@ -1758,7 +1758,8 @@ static int soc_probe(struct platform_dev /* Bodge while we unpick instantiation */ card->dev = &pdev->dev; @@ -8482,6 +8428,3 @@ index 6173d15..d9c52a7 100644 } static int soc_cleanup_card_resources(struct snd_soc_card *card) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch index 361b8d718a..f6450367cf 100644 --- a/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch +++ b/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/tty/serial/serial_core.c | 3 +++ 1 file changed, 3 insertions(+) -diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c -index 603d2cc..4020e07 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c -@@ -359,6 +359,9 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, +@@ -359,6 +359,9 @@ uart_get_baud_rate(struct uart_port *por break; } @@ -22,6 +20,3 @@ index 603d2cc..4020e07 100644 for (try = 0; try < 2; try++) { baud = tty_termios_baud_rate(termios); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch index caaf84aab3..cb5d02494c 100644 --- a/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch +++ b/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 183 insertions(+) create mode 100644 drivers/pwm/pwm-mediatek.c -diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig -index 062630a..76974ea 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -230,6 +230,15 @@ config PWM_LPSS_PLATFORM @@ -31,11 +29,9 @@ index 062630a..76974ea 100644 config PWM_MXS tristate "Freescale MXS PWM support" depends on ARCH_MXS && OF -diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile -index a0e00c0..aa0bd2e 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o +@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o @@ -43,9 +39,6 @@ index a0e00c0..aa0bd2e 100644 obj-$(CONFIG_PWM_MXS) += pwm-mxs.o obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o -diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c -new file mode 100644 -index 0000000..f9d8ed4 --- /dev/null +++ b/drivers/pwm/pwm-mediatek.c @@ -0,0 +1,173 @@ @@ -222,6 +215,3 @@ index 0000000..f9d8ed4 +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_ALIAS("platform:mtk-pwm"); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch b/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch deleted file mode 100644 index ba462bf92e..0000000000 --- a/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch +++ /dev/null @@ -1,36 +0,0 @@ ---- a/arch/mips/include/asm/mach-ralink/mt7621.h -+++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -13,6 +13,9 @@ - #ifndef _MT7621_REGS_H_ - #define _MT7621_REGS_H_ - -+#define MT7621_PALMBUS_BASE 0x1C000000 -+#define MT7621_PALMBUS_SIZE 0x03FFFFFF -+ - #define MT7621_SYSC_BASE 0x1E000000 - - #define SYSC_REG_CHIP_NAME0 0x00 ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -204,6 +204,21 @@ void prom_soc_init(struct ralink_soc_inf - mips_cm_probe(); - mips_cpc_probe(); - -+ if (mips_cm_numiocu()) { -+ /* mips_cm_probe() wipes out bootloader -+ config for CM regions and we have to configure them -+ again. This SoC cannot talk to pamlbus devices -+ witout proper iocu region set up. -+ -+ FIXME: it would be better to do this with values -+ from DT, but we need this very early because -+ without this we cannot talk to pretty much anything -+ including serial. -+ */ -+ write_gcr_reg0_base(MT7621_PALMBUS_BASE); -+ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | CM_GCR_REGn_MASK_CMTGT_IOCU0); -+ } -+ - if (!register_cps_smp_ops()) - return; - if (!register_cmp_smp_ops()) diff --git a/target/linux/ramips/patches-4.3/0061-mt7621-set-up-pci-memory-region.patch b/target/linux/ramips/patches-4.3/0061-mt7621-set-up-pci-memory-region.patch deleted file mode 100644 index e6338a9478..0000000000 --- a/target/linux/ramips/patches-4.3/0061-mt7621-set-up-pci-memory-region.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/pci/pci-mt7621.c -+++ b/arch/mips/pci/pci-mt7621.c -@@ -46,6 +46,7 @@ - #include <linux/version.h> - #include <asm/pci.h> - #include <asm/io.h> -+#include <asm/mips-cm.h> - #include <linux/init.h> - #include <linux/module.h> - #include <linux/delay.h> -@@ -553,6 +554,23 @@ set_phy_for_ssc(void) - #endif - } - -+void setup_cm_memory_region(struct resource *mem_resource) -+{ -+ resource_size_t mask; -+ if (mips_cm_numiocu()) { -+ /* FIXME: hardware doesn't accept mask values with 1s after -+ 0s (e.g. 0xffef), so it would be great to warn if that's -+ about to happen */ -+ mask = ~(mem_resource->end - mem_resource->start); -+ -+ write_gcr_reg1_base(mem_resource->start); -+ write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); -+ printk("PCI coherence region base: 0x%08lx, mask/settings: 0x%08lx\n", -+ read_gcr_reg1_base(), -+ read_gcr_reg1_mask()); -+ } -+} -+ - static int mt7621_pci_probe(struct platform_device *pdev) - { - unsigned long val = 0; -@@ -780,6 +798,7 @@ pcie(2/1/0) link status pcie2_num pcie1_ - } - - pci_load_of_ranges(&mt7621_controller, pdev->dev.of_node); -+ setup_cm_memory_region(mt7621_controller.mem_resource); - register_pci_controller(&mt7621_controller); - return 0; - diff --git a/target/linux/ramips/patches-4.3/0062-remove-cm-memory-regions-cleanup-hack.patch b/target/linux/ramips/patches-4.3/0062-remove-cm-memory-regions-cleanup-hack.patch deleted file mode 100644 index 9013819492..0000000000 --- a/target/linux/ramips/patches-4.3/0062-remove-cm-memory-regions-cleanup-hack.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/kernel/mips-cm.c -+++ b/arch/mips/kernel/mips-cm.c -@@ -238,7 +238,7 @@ int mips_cm_probe(void) - write_gcr_base(base_reg); - - /* disable CM regions */ --/* write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); -+ write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); -@@ -246,7 +246,7 @@ int mips_cm_probe(void) - write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); --*/ -+ - /* probe for an L2-only sync region */ - mips_cm_probe_l2sync(); - diff --git a/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch index 81702c28e8..b57019631d 100644 --- a/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch +++ b/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c -@@ -819,9 +819,6 @@ static void split_uimage(struct mtd_info +@@ -792,9 +792,6 @@ static void split_uimage(struct mtd_info return; len = be32_to_cpu(hdr.size) + 0x40; diff --git a/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch index 50b88dbcd3..483c1619dd 100644 --- a/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch +++ b/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c -@@ -807,8 +807,11 @@ static void split_uimage(struct mtd_info +@@ -780,8 +780,11 @@ static void split_uimage(struct mtd_info { struct { __be32 magic; @@ -13,7 +13,7 @@ } hdr; size_t len; -@@ -818,7 +821,10 @@ static void split_uimage(struct mtd_info +@@ -791,7 +794,10 @@ static void split_uimage(struct mtd_info if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC)) return; diff --git a/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch b/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch index 9f76aa1f5b..5095d68df4 100644 --- a/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch +++ b/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch @@ -36,5 +36,5 @@ + if (chosen_dtb) + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); + diff --git a/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch b/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch index 46e4f5bbec..2c726f6732 100644 --- a/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch +++ b/target/linux/ramips/patches-4.3/0500-Documentation-DT-net-add-docs-for-ralink-mediatek-So.patch @@ -20,9 +20,6 @@ Cc: devicetree@vger.kernel.org create mode 100644 Documentation/devicetree/bindings/net/ralink,rt2880-net.txt create mode 100644 Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt -diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt -new file mode 100644 -index 0000000..fb47d8e --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt @@ -0,0 +1,26 @@ @@ -52,9 +49,6 @@ index 0000000..fb47d8e + interrupt-parent = <&intc>; + interrupts = <17>; +}; -diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt -new file mode 100644 -index 0000000..88b095d --- /dev/null +++ b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt @@ -0,0 +1,61 @@ @@ -119,9 +113,6 @@ index 0000000..88b095d + }; + +}; -diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt -new file mode 100644 -index 0000000..ed32e21 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt @@ -0,0 +1,32 @@ @@ -157,6 +148,3 @@ index 0000000..ed32e21 + interrupt-parent = <&intc>; + interrupts = <17>; +}; --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch b/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch index c012a8dc59..e94c1fab05 100644 --- a/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch +++ b/target/linux/ramips/patches-4.3/0501-net-next-mediatek-add-the-drivers-core-files.patch @@ -44,9 +44,6 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.c create mode 100644 drivers/net/ethernet/mediatek/mtk_eth_soc.h -diff --git a/drivers/net/ethernet/mediatek/ethtool.c b/drivers/net/ethernet/mediatek/ethtool.c -new file mode 100644 -index 0000000..697cd80 --- /dev/null +++ b/drivers/net/ethernet/mediatek/ethtool.c @@ -0,0 +1,235 @@ @@ -285,9 +282,6 @@ index 0000000..697cd80 + + netdev->ethtool_ops = &fe_ethtool_ops; +} -diff --git a/drivers/net/ethernet/mediatek/ethtool.h b/drivers/net/ethernet/mediatek/ethtool.h -new file mode 100644 -index 0000000..955b84f --- /dev/null +++ b/drivers/net/ethernet/mediatek/ethtool.h @@ -0,0 +1,22 @@ @@ -313,9 +307,6 @@ index 0000000..955b84f +void fe_set_ethtool_ops(struct net_device *netdev); + +#endif /* FE_ETHTOOL_H */ -diff --git a/drivers/net/ethernet/mediatek/mdio.c b/drivers/net/ethernet/mediatek/mdio.c -new file mode 100644 -index 0000000..169c937 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mdio.c @@ -0,0 +1,258 @@ @@ -577,9 +568,6 @@ index 0000000..169c937 + of_node_put(priv->mii_bus->dev.of_node); + kfree(priv->mii_bus); +} -diff --git a/drivers/net/ethernet/mediatek/mdio.h b/drivers/net/ethernet/mediatek/mdio.h -new file mode 100644 -index 0000000..b7d4a24 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mdio.h @@ -0,0 +1,27 @@ @@ -610,9 +598,6 @@ index 0000000..b7d4a24 +static inline void fe_mdio_cleanup(struct fe_priv *priv) {} +#endif +#endif -diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -new file mode 100644 -index 0000000..dae7147 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -0,0 +1,1607 @@ @@ -2223,9 +2208,6 @@ index 0000000..dae7147 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("Ethernet driver for Ralink SoC"); +MODULE_VERSION(MTK_FE_DRV_VERSION); -diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h -new file mode 100644 -index 0000000..ba5ba07 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -0,0 +1,522 @@ @@ -2751,6 +2733,3 @@ index 0000000..ba5ba07 +} + +#endif /* FE_ETH_H */ --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch b/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch index 064298af52..675888f980 100644 --- a/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch +++ b/target/linux/ramips/patches-4.3/0502-net-next-mediatek-add-switch-driver-for-rt3050.patch @@ -14,9 +14,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h -diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c -new file mode 100644 -index 0000000..f07f4a5 --- /dev/null +++ b/drivers/net/ethernet/mediatek/esw_rt3050.c @@ -0,0 +1,640 @@ @@ -660,9 +657,6 @@ index 0000000..f07f4a5 +{ + platform_driver_unregister(&esw_driver); +} -diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.h b/drivers/net/ethernet/mediatek/esw_rt3050.h -new file mode 100644 -index 0000000..455107a --- /dev/null +++ b/drivers/net/ethernet/mediatek/esw_rt3050.h @@ -0,0 +1,29 @@ @@ -695,6 +689,3 @@ index 0000000..455107a + +#endif +#endif --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch b/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch index a338f671c9..325321eb12 100644 --- a/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch +++ b/target/linux/ramips/patches-4.3/0503-net-next-mediatek-add-switch-driver-for-mt7620.patch @@ -14,9 +14,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.c create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7620.h -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.c b/drivers/net/ethernet/mediatek/gsw_mt7620.c -new file mode 100644 -index 0000000..a37ed1b --- /dev/null +++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c @@ -0,0 +1,255 @@ @@ -275,9 +272,6 @@ index 0000000..a37ed1b +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7620 SoC"); +MODULE_VERSION(MTK_FE_DRV_VERSION); -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.h b/drivers/net/ethernet/mediatek/gsw_mt7620.h -new file mode 100644 -index 0000000..0d6ee84 --- /dev/null +++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h @@ -0,0 +1,117 @@ @@ -398,6 +392,3 @@ index 0000000..0d6ee84 +u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg); + +#endif --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch b/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch index 5a3f75a02e..08d93f73ea 100644 --- a/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch +++ b/target/linux/ramips/patches-4.3/0504-net-next-mediatek-add-switch-driver-for-mt7621.patch @@ -12,9 +12,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 1 file changed, 284 insertions(+) create mode 100644 drivers/net/ethernet/mediatek/gsw_mt7621.c -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7621.c b/drivers/net/ethernet/mediatek/gsw_mt7621.c -new file mode 100644 -index 0000000..500841f --- /dev/null +++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c @@ -0,0 +1,284 @@ @@ -302,6 +299,3 @@ index 0000000..500841f +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7621 SoC"); +MODULE_VERSION(MTK_FE_DRV_VERSION); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch b/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch index 7597b2abe0..8ed00e38a6 100644 --- a/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch +++ b/target/linux/ramips/patches-4.3/0505-net-next-mediatek-add-support-for-rt2880.patch @@ -19,9 +19,6 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> create mode 100644 drivers/net/ethernet/mediatek/mdio_rt2880.h create mode 100644 drivers/net/ethernet/mediatek/soc_rt2880.c -diff --git a/drivers/net/ethernet/mediatek/mdio_rt2880.c b/drivers/net/ethernet/mediatek/mdio_rt2880.c -new file mode 100644 -index 0000000..eb9df6e --- /dev/null +++ b/drivers/net/ethernet/mediatek/mdio_rt2880.c @@ -0,0 +1,222 @@ @@ -247,9 +244,6 @@ index 0000000..eb9df6e + if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0]) + fe_connect_phy_node(priv, priv->phy->phy_node[0]); +} -diff --git a/drivers/net/ethernet/mediatek/mdio_rt2880.h b/drivers/net/ethernet/mediatek/mdio_rt2880.h -new file mode 100644 -index 0000000..6884894 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mdio_rt2880.h @@ -0,0 +1,23 @@ @@ -276,9 +270,6 @@ index 0000000..6884894 +void rt2880_port_init(struct fe_priv *priv, struct device_node *np); + +#endif -diff --git a/drivers/net/ethernet/mediatek/soc_rt2880.c b/drivers/net/ethernet/mediatek/soc_rt2880.c -new file mode 100644 -index 0000000..0792dab --- /dev/null +++ b/drivers/net/ethernet/mediatek/soc_rt2880.c @@ -0,0 +1,76 @@ @@ -358,6 +349,3 @@ index 0000000..0792dab +}; + +MODULE_DEVICE_TABLE(of, of_fe_match); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch index 8fd09d3694..a80c940ec6 100644 --- a/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch +++ b/target/linux/ramips/patches-4.3/0506-net-next-mediatek-add-support-for-rt3050.patch @@ -49,7 +49,7 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> /* HW limitations for this switch: * - No large frame support (PKT_MAX_LEN at most 1536) * - Can't have untagged vlan and tagged vlan on one port at the same time, -@@ -559,7 +543,7 @@ +@@ -559,7 +543,7 @@ static irqreturn_t esw_interrupt(int irq static int esw_probe(struct platform_device *pdev) { @@ -58,7 +58,7 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> struct device_node *np = pdev->dev.of_node; const __be32 *port_map, *reg_init; struct rt305x_esw *esw; -@@ -629,12 +613,9 @@ +@@ -629,12 +613,9 @@ static struct platform_driver esw_driver }, }; diff --git a/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch b/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch index 1b9815571f..53d35d0728 100644 --- a/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch +++ b/target/linux/ramips/patches-4.3/0507-net-next-mediatek-add-support-for-rt3883.patch @@ -14,9 +14,6 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> 1 file changed, 75 insertions(+) create mode 100644 drivers/net/ethernet/mediatek/soc_rt3883.c -diff --git a/drivers/net/ethernet/mediatek/soc_rt3883.c b/drivers/net/ethernet/mediatek/soc_rt3883.c -new file mode 100644 -index 0000000..7f34d4d --- /dev/null +++ b/drivers/net/ethernet/mediatek/soc_rt3883.c @@ -0,0 +1,75 @@ @@ -95,6 +92,3 @@ index 0000000..7f34d4d +}; + +MODULE_DEVICE_TABLE(of, of_fe_match); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch b/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch index 83e04244a4..4055026cb5 100644 --- a/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch +++ b/target/linux/ramips/patches-4.3/0508-net-next-mediatek-add-support-for-mt7620.patch @@ -21,9 +21,6 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> create mode 100644 drivers/net/ethernet/mediatek/mdio_mt7620.c create mode 100644 drivers/net/ethernet/mediatek/soc_mt7620.c -diff --git a/drivers/net/ethernet/mediatek/mdio_mt7620.c b/drivers/net/ethernet/mediatek/mdio_mt7620.c -new file mode 100644 -index 0000000..89c6c30 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c @@ -0,0 +1,156 @@ @@ -183,9 +180,6 @@ index 0000000..89c6c30 + priv->phy->speed[port], + (priv->phy->duplex[port] == DUPLEX_FULL)); +} -diff --git a/drivers/net/ethernet/mediatek/soc_mt7620.c b/drivers/net/ethernet/mediatek/soc_mt7620.c -new file mode 100644 -index 0000000..9ad6bc9 --- /dev/null +++ b/drivers/net/ethernet/mediatek/soc_mt7620.c @@ -0,0 +1,334 @@ @@ -523,6 +517,3 @@ index 0000000..9ad6bc9 +}; + +MODULE_DEVICE_TABLE(of, of_fe_match); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch b/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch index a59059d2e8..401453904c 100644 --- a/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch +++ b/target/linux/ramips/patches-4.3/0509-net-next-mediatek-add-support-for-mt7621.patch @@ -19,9 +19,6 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> 1 file changed, 186 insertions(+) create mode 100644 drivers/net/ethernet/mediatek/soc_mt7621.c -diff --git a/drivers/net/ethernet/mediatek/soc_mt7621.c b/drivers/net/ethernet/mediatek/soc_mt7621.c -new file mode 100644 -index 0000000..1609a3e --- /dev/null +++ b/drivers/net/ethernet/mediatek/soc_mt7621.c @@ -0,0 +1,186 @@ @@ -211,6 +208,3 @@ index 0000000..1609a3e +}; + +MODULE_DEVICE_TABLE(of, of_fe_match); --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch b/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch index ac07e8f35e..51427adcc5 100644 --- a/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch +++ b/target/linux/ramips/patches-4.3/0510-net-next-mediatek-add-Kconfig-and-Makefile.patch @@ -17,11 +17,9 @@ Signed-off-by: Michael Lee <igvtee@gmail.com> create mode 100644 drivers/net/ethernet/mediatek/Kconfig create mode 100644 drivers/net/ethernet/mediatek/Makefile -diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig -index 955d06b..5302f81 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig -@@ -105,6 +105,7 @@ config LANTIQ_ETOP +@@ -106,6 +106,7 @@ config LANTIQ_ETOP Support for the MII0 inside the Lantiq SoC source "drivers/net/ethernet/marvell/Kconfig" @@ -29,11 +27,9 @@ index 955d06b..5302f81 100644 source "drivers/net/ethernet/mellanox/Kconfig" source "drivers/net/ethernet/micrel/Kconfig" source "drivers/net/ethernet/microchip/Kconfig" -diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile -index 4a2ee98..ecc16c2 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_JME) += jme.o +@@ -46,6 +46,7 @@ obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ @@ -41,9 +37,6 @@ index 4a2ee98..ecc16c2 100644 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/ -diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig -new file mode 100644 -index 0000000..cf883c4 --- /dev/null +++ b/drivers/net/ethernet/mediatek/Kconfig @@ -0,0 +1,62 @@ @@ -109,9 +102,6 @@ index 0000000..cf883c4 + def_tristate NET_MEDIATEK_SOC + depends on NET_MEDIATEK_MT7621 +endif -diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile -new file mode 100644 -index 0000000..c4d2dfb --- /dev/null +++ b/drivers/net/ethernet/mediatek/Makefile @@ -0,0 +1,20 @@ @@ -135,6 +125,3 @@ index 0000000..c4d2dfb +obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o +obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o +obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch b/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch index 349662f6d3..4d5c2d8744 100644 --- a/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch +++ b/target/linux/ramips/patches-4.3/0511-net-mediatek-add-support-for-the-multiphy-carrier-pa.patch @@ -13,11 +13,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/net/ethernet/mediatek/mdio_mt7620.c | 12 ++++++++++++ 5 files changed, 16 insertions(+) -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.c b/drivers/net/ethernet/mediatek/gsw_mt7620.c -index a37ed1b..28122ac 100644 --- a/drivers/net/ethernet/mediatek/gsw_mt7620.c +++ b/drivers/net/ethernet/mediatek/gsw_mt7620.c -@@ -54,6 +54,7 @@ static irqreturn_t gsw_interrupt_mt7620(int irq, void *_priv) +@@ -54,6 +54,7 @@ static irqreturn_t gsw_interrupt_mt7620( priv->link[i] = link; } @@ -25,22 +23,18 @@ index a37ed1b..28122ac 100644 mtk_switch_w32(gsw, status, GSW_REG_ISR); return IRQ_HANDLED; -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7620.h b/drivers/net/ethernet/mediatek/gsw_mt7620.h -index 0d6ee84..dcef9a8 100644 --- a/drivers/net/ethernet/mediatek/gsw_mt7620.h +++ b/drivers/net/ethernet/mediatek/gsw_mt7620.h -@@ -113,5 +113,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *gsw, u32 reg); +@@ -113,5 +113,6 @@ u32 mt7530_mdio_r32(struct mt7620_gsw *g u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register, u32 write_data); u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg); +void mt7620_handle_carrier(struct fe_priv *priv); #endif -diff --git a/drivers/net/ethernet/mediatek/gsw_mt7621.c b/drivers/net/ethernet/mediatek/gsw_mt7621.c -index 500841f..dc349ef 100644 --- a/drivers/net/ethernet/mediatek/gsw_mt7621.c +++ b/drivers/net/ethernet/mediatek/gsw_mt7621.c -@@ -60,6 +60,7 @@ static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv) +@@ -60,6 +60,7 @@ static irqreturn_t gsw_interrupt_mt7621( } } @@ -48,11 +42,9 @@ index 500841f..dc349ef 100644 mt7530_mdio_w32(gsw, 0x700c, 0x1f); return IRQ_HANDLED; -diff --git a/drivers/net/ethernet/mediatek/mdio.c b/drivers/net/ethernet/mediatek/mdio.c -index 169c937..79a946e 100644 --- a/drivers/net/ethernet/mediatek/mdio.c +++ b/drivers/net/ethernet/mediatek/mdio.c -@@ -89,6 +89,7 @@ int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node) +@@ -89,6 +89,7 @@ int fe_connect_phy_node(struct fe_priv * phydev->supported &= PHY_GBIT_FEATURES; phydev->advertising = phydev->supported; @@ -60,11 +52,9 @@ index 169c937..79a946e 100644 dev_info(priv->device, "connected port %d to PHY at %s [uid=%08x, driver=%s]\n", -diff --git a/drivers/net/ethernet/mediatek/mdio_mt7620.c b/drivers/net/ethernet/mediatek/mdio_mt7620.c -index 89c6c30..db6db52 100644 --- a/drivers/net/ethernet/mediatek/mdio_mt7620.c +++ b/drivers/net/ethernet/mediatek/mdio_mt7620.c -@@ -137,6 +137,17 @@ int mt7620_has_carrier(struct fe_priv *priv) +@@ -137,6 +137,17 @@ int mt7620_has_carrier(struct fe_priv *p } @@ -82,12 +72,9 @@ index 89c6c30..db6db52 100644 void mt7620_print_link_state(struct fe_priv *priv, int port, int link, int speed, int duplex) { -@@ -153,4 +164,5 @@ void mt7620_mdio_link_adjust(struct fe_priv *priv, int port) +@@ -153,4 +164,5 @@ void mt7620_mdio_link_adjust(struct fe_p mt7620_print_link_state(priv, port, priv->link[port], priv->phy->speed[port], (priv->phy->duplex[port] == DUPLEX_FULL)); + mt7620_handle_carrier(priv); } --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch b/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch index 2f1557e873..5d0072fe1e 100644 --- a/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch +++ b/target/linux/ramips/patches-4.3/0512-net-mediatek-add-swconfig-driver-for-esw_rt3050.patch @@ -8,8 +8,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/net/ethernet/mediatek/esw_rt3050.c | 805 ++++++++++++++++++++++++++++ 1 file changed, 805 insertions(+) -diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c -index 670ae16..352d50a 100644 --- a/drivers/net/ethernet/mediatek/esw_rt3050.c +++ b/drivers/net/ethernet/mediatek/esw_rt3050.c @@ -17,6 +17,8 @@ @@ -167,7 +165,7 @@ index 670ae16..352d50a 100644 static unsigned esw_get_port_disable(struct rt305x_esw *esw) { unsigned reg; -@@ -261,6 +372,59 @@ static unsigned esw_get_port_disable(struct rt305x_esw *esw) +@@ -261,6 +372,59 @@ static unsigned esw_get_port_disable(str RT305X_ESW_POC0_DIS_PORT_M; } @@ -227,7 +225,7 @@ index 670ae16..352d50a 100644 static void esw_hw_init(struct rt305x_esw *esw) { int i; -@@ -519,6 +683,9 @@ static void esw_hw_init(struct rt305x_esw *esw) +@@ -519,6 +683,9 @@ static void esw_hw_init(struct rt305x_es for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) esw->ports[i].led = 0x05; @@ -237,7 +235,7 @@ index 670ae16..352d50a 100644 /* Only unmask the port change interrupt */ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR); } -@@ -541,11 +708,629 @@ static irqreturn_t esw_interrupt(int irq, void *_esw) +@@ -541,11 +708,629 @@ static irqreturn_t esw_interrupt(int irq return IRQ_HANDLED; } @@ -867,7 +865,7 @@ index 670ae16..352d50a 100644 struct rt305x_esw *esw; struct resource *irq; int ret; -@@ -568,6 +1353,21 @@ static int esw_probe(struct platform_device *pdev) +@@ -568,6 +1353,21 @@ static int esw_probe(struct platform_dev if (reg_init) esw->reg_led_polarity = be32_to_cpu(*reg_init); @@ -889,7 +887,7 @@ index 670ae16..352d50a 100644 platform_set_drvdata(pdev, esw); spin_lock_init(&esw->reg_rw_lock); -@@ -583,6 +1383,11 @@ static int esw_probe(struct platform_device *pdev) +@@ -583,6 +1383,11 @@ static int esw_probe(struct platform_dev } return ret; @@ -901,6 +899,3 @@ index 670ae16..352d50a 100644 } static int esw_remove(struct platform_device *pdev) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch b/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch index 87ad12808d..bbad8cc523 100644 --- a/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch +++ b/target/linux/ramips/patches-4.3/0513-net-mediatek-add-swconfig-driver-for-gsw_mt762x.patch @@ -15,11 +15,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/net/ethernet/mediatek/mt7530.c create mode 100644 drivers/net/ethernet/mediatek/mt7530.h -diff --git a/drivers/net/ethernet/mediatek/Makefile b/drivers/net/ethernet/mediatek/Makefile -index c4d2dfb..07ba4c2 100644 --- a/drivers/net/ethernet/mediatek/Makefile +++ b/drivers/net/ethernet/mediatek/Makefile -@@ -15,6 +15,6 @@ mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620) += soc_mt7620.o +@@ -15,6 +15,6 @@ mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7620 mtk-eth-soc-$(CONFIG_NET_MEDIATEK_MT7621) += soc_mt7621.o obj-$(CONFIG_NET_MEDIATEK_ESW_RT3050) += esw_rt3050.o @@ -28,9 +26,6 @@ index c4d2dfb..07ba4c2 100644 +obj-$(CONFIG_NET_MEDIATEK_GSW_MT7620) += gsw_mt7620.o mt7530.o +obj-$(CONFIG_NET_MEDIATEK_GSW_MT7621) += gsw_mt7621.o mt7530.o obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk-eth-soc.o -diff --git a/drivers/net/ethernet/mediatek/mt7530.c b/drivers/net/ethernet/mediatek/mt7530.c -new file mode 100644 -index 0000000..4d9980d --- /dev/null +++ b/drivers/net/ethernet/mediatek/mt7530.c @@ -0,0 +1,804 @@ @@ -838,9 +833,6 @@ index 0000000..4d9980d + + return 0; +} -diff --git a/drivers/net/ethernet/mediatek/mt7530.h b/drivers/net/ethernet/mediatek/mt7530.h -new file mode 100644 -index 0000000..1fc8c62 --- /dev/null +++ b/drivers/net/ethernet/mediatek/mt7530.h @@ -0,0 +1,20 @@ @@ -864,11 +856,9 @@ index 0000000..1fc8c62 +int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus, int vlan); + +#endif -diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -index dae7147..6299f87 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -1308,8 +1308,13 @@ static int __init fe_init(struct net_device *dev) +@@ -1308,8 +1308,13 @@ static int __init fe_init(struct net_dev } err = fe_hw_init(dev); @@ -884,8 +874,6 @@ index dae7147..6299f87 100644 err_phy_disconnect: if (priv->phy) -diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h -index ba5ba07..d5f8b87 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -383,6 +383,7 @@ struct fe_soc_data { @@ -896,11 +884,9 @@ index ba5ba07..d5f8b87 100644 void (*port_init)(struct fe_priv *priv, struct device_node *port); int (*has_carrier)(struct fe_priv *priv); int (*mdio_init)(struct fe_priv *priv); -diff --git a/drivers/net/ethernet/mediatek/soc_mt7620.c b/drivers/net/ethernet/mediatek/soc_mt7620.c -index 9ad6bc9..740dd90 100644 --- a/drivers/net/ethernet/mediatek/soc_mt7620.c +++ b/drivers/net/ethernet/mediatek/soc_mt7620.c -@@ -313,6 +313,7 @@ static struct fe_soc_data mt7620_data = { +@@ -313,6 +313,7 @@ static struct fe_soc_data mt7620_data = .fwd_config = mt7620_fwd_config, .tx_dma = mt7620_tx_dma, .switch_init = mtk_gsw_init, @@ -908,6 +894,3 @@ index 9ad6bc9..740dd90 100644 .port_init = mt7620_port_init, .reg_table = mt7620_reg_table, .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS, --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch b/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch index 0ea4592483..de44a9f286 100644 --- a/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch +++ b/target/linux/ramips/patches-4.3/0514-net-mediatek-fix_esw.patch @@ -8,7 +8,7 @@ #include <linux/switch.h> -@@ -1332,7 +1333,6 @@ +@@ -1332,7 +1333,6 @@ static int esw_probe(struct platform_dev const __be32 *port_map, *reg_init; struct switch_dev *swdev; struct rt305x_esw *esw; @@ -16,7 +16,7 @@ int ret; esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL); -@@ -1340,7 +1340,7 @@ +@@ -1340,7 +1340,7 @@ static int esw_probe(struct platform_dev return -ENOMEM; esw->dev = &pdev->dev; @@ -25,7 +25,7 @@ esw->base = devm_ioremap_resource(&pdev->dev, res); if (!esw->base) return -EADDRNOTAVAIL; -@@ -1365,7 +1365,7 @@ +@@ -1365,7 +1365,7 @@ static int esw_probe(struct platform_dev ret = register_switch(swdev, NULL); if (ret < 0) { dev_err(&pdev->dev, "register_switch failed\n"); @@ -34,7 +34,7 @@ } platform_set_drvdata(pdev, esw); -@@ -1383,11 +1383,6 @@ +@@ -1383,11 +1383,6 @@ static int esw_probe(struct platform_dev } return ret; diff --git a/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch b/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch index 0628364ec9..369afa97de 100644 --- a/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch +++ b/target/linux/ramips/patches-4.3/0601-net-mediatke-add-phy_ethtool_ioctl-support.patch @@ -8,11 +8,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) -diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -index 9999768..84b1a43 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -1342,6 +1342,9 @@ static int fe_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +@@ -1344,6 +1344,9 @@ static int fe_do_ioctl(struct net_device return -ENODEV; switch (cmd) { @@ -22,6 +20,3 @@ index 9999768..84b1a43 100644 case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0902-mt7621-use-gic-timer.patch b/target/linux/ramips/patches-4.3/0902-mt7621-use-gic-timer.patch deleted file mode 100644 index 1c6da106cb..0000000000 --- a/target/linux/ramips/patches-4.3/0902-mt7621-use-gic-timer.patch +++ /dev/null @@ -1,82 +0,0 @@ ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -52,6 +52,8 @@ - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_MIPS_CPS - select MIPS_GIC -+ select COMMON_CLK -+ select CLKSRC_MIPS_GIC - select HW_HAS_PCI - endchoice - ---- a/arch/mips/ralink/Makefile -+++ b/arch/mips/ralink/Makefile -@@ -6,14 +6,18 @@ - # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - # Copyright (C) 2013 John Crispin <blogic@openwrt.org> - --obj-y := prom.o of.o reset.o clk.o timer.o -+obj-y := prom.o of.o reset.o -+ -+ifndef CONFIG_MIPS_GIC -+ obj-y += clk.o timer.o -+endif - - obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o - - obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o - - obj-$(CONFIG_IRQ_INTC) += irq.o --obj-$(CONFIG_MIPS_GIC) += irq-gic.o -+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o - - obj-$(CONFIG_SOC_RT288X) += rt288x.o - obj-$(CONFIG_SOC_RT305X) += rt305x.o ---- a/arch/mips/ralink/irq-gic.c -+++ b/arch/mips/ralink/irq-gic.c -@@ -3,13 +3,6 @@ - #include <linux/of.h> - #include <linux/irqchip.h> - --#include <linux/irqchip/mips-gic.h> -- --unsigned int get_c0_compare_int(void) --{ -- return gic_get_c0_compare_int(); --} -- - void __init - arch_init_irq(void) - { ---- /dev/null -+++ b/arch/mips/ralink/timer-gic.c -@@ -0,0 +1,15 @@ -+#include <linux/init.h> -+ -+#include <linux/of.h> -+#include <linux/clk-provider.h> -+#include <linux/clocksource.h> -+ -+#include "common.h" -+ -+void __init plat_time_init(void) -+{ -+ ralink_of_remap(); -+ -+ of_clk_init(NULL); -+ clocksource_of_init(); -+} ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -152,11 +152,6 @@ - } - break; - } -- cpu_clk = 880000000; -- ralink_clk_add("cpu", cpu_clk); -- ralink_clk_add("1e000b00.spi", 50000000); -- ralink_clk_add("1e000c00.uartlite", 50000000); -- ralink_clk_add("1e000d00.uart", 50000000); - } - - void __init ralink_of_remap(void) diff --git a/target/linux/ramips/patches-4.3/0903-mt7621-fix-gic-perfcounter.patch b/target/linux/ramips/patches-4.3/0903-mt7621-fix-gic-perfcounter.patch deleted file mode 100644 index bb19511a11..0000000000 --- a/target/linux/ramips/patches-4.3/0903-mt7621-fix-gic-perfcounter.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/arch/mips/ralink/irq-gic.c -+++ b/arch/mips/ralink/irq-gic.c -@@ -2,6 +2,13 @@ - - #include <linux/of.h> - #include <linux/irqchip.h> -+#include <linux/irqchip/mips-gic.h> -+ -+int get_c0_perfcount_int(void) -+{ -+ return gic_get_c0_perfcount_int(); -+} -+EXPORT_SYMBOL_GPL(get_c0_perfcount_int); - - void __init - arch_init_irq(void) |