diff options
Diffstat (limited to 'target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch')
| -rw-r--r-- | target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch | 459 |
1 files changed, 0 insertions, 459 deletions
diff --git a/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch b/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch deleted file mode 100644 index db6144c397..0000000000 --- a/target/linux/oxnas/patches-4.14/0001-ARM-dts-rename-oxnas-dts-files.patch +++ /dev/null @@ -1,459 +0,0 @@ -From a9d2b105ccd23e07e3dd99d010a34bd5d1c95b42 Mon Sep 17 00:00:00 2001 -From: Daniel Golle <daniel@makrotopia.org> -Date: Sat, 13 Jan 2018 18:35:59 +0100 -Subject: [PATCH 1/3] ARM: dts: rename oxnas dts files - -Other platforms' device-tree files start with a platform prefix, such as -sun7i-a20-*.dts or at91-*.dts. -This naming scheme turns out to be handy when using multi-platform build -systems such as OpenWrt. -Prepend oxnas files with their platform prefix to comply with the naming -scheme already used for most other platforms. - -Signed-off-by: Daniel Golle <daniel@makrotopia.org> -Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- - arch/arm/boot/dts/Makefile | 4 ++-- - arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} | 0 - ...-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} | 0 - 3 files changed, 2 insertions(+), 2 deletions(-) - rename arch/arm/boot/dts/{wd-mbwe.dts => ox810se-wd-mbwe.dts} (100%) - rename arch/arm/boot/dts/{cloudengines-pogoplug-series-3.dts => ox820-cloudengines-pogoplug-series-3.dts} (100%) - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -685,8 +685,8 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \ - dtb-$(CONFIG_ARCH_PRIMA2) += \ - prima2-evb.dtb - dtb-$(CONFIG_ARCH_OXNAS) += \ -- wd-mbwe.dtb \ -- cloudengines-pogoplug-series-3.dtb -+ ox810se-wd-mbwe.dtb \ -+ ox820-cloudengines-pogoplug-series-3.dtb - dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8060-dragonboard.dtb \ - qcom-apq8064-arrow-sd-600eval.dtb \ ---- a/arch/arm/boot/dts/cloudengines-pogoplug-series-3.dts -+++ /dev/null -@@ -1,94 +0,0 @@ --/* -- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 -- * -- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> -- * -- * Licensed under GPLv2 or later -- */ -- --/dts-v1/; --#include "ox820.dtsi" -- --/ { -- model = "Cloud Engines PogoPlug Series 3"; -- -- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; -- -- chosen { -- bootargs = "earlyprintk"; -- stdout-path = "serial0:115200n8"; -- }; -- -- memory { -- /* 128Mbytes DDR */ -- reg = <0x60000000 0x8000000>; -- }; -- -- aliases { -- serial0 = &uart0; -- gpio0 = &gpio0; -- gpio1 = &gpio1; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- blue { -- label = "pogoplug:blue"; -- gpios = <&gpio0 2 0>; -- default-state = "keep"; -- }; -- -- orange { -- label = "pogoplug:orange"; -- gpios = <&gpio1 16 1>; -- default-state = "keep"; -- }; -- -- green { -- label = "pogoplug:green"; -- gpios = <&gpio1 17 1>; -- default-state = "keep"; -- }; -- }; --}; -- --&uart0 { -- status = "okay"; -- -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_uart0>; --}; -- --&nandc { -- status = "okay"; -- -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_nand>; -- -- nand@0 { -- reg = <0>; -- #address-cells = <1>; -- #size-cells = <1>; -- nand-ecc-mode = "soft"; -- nand-ecc-algo = "hamming"; -- -- partition@0 { -- label = "boot"; -- reg = <0x00000000 0x00e00000>; -- read-only; -- }; -- -- partition@e00000 { -- label = "ubi"; -- reg = <0x00e00000 0x07200000>; -- }; -- }; --}; -- --ða { -- status = "okay"; -- -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_etha_mdio>; --}; ---- /dev/null -+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts -@@ -0,0 +1,112 @@ -+/* -+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition -+ * -+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> -+ * -+ * Licensed under GPLv2 or later -+ */ -+ -+/dts-v1/; -+#include "ox810se.dtsi" -+ -+/ { -+ model = "Western Digital My Book World Edition"; -+ -+ compatible = "wd,mbwe", "oxsemi,ox810se"; -+ -+ chosen { -+ bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; -+ }; -+ -+ memory { -+ /* 128Mbytes DDR */ -+ reg = <0x48000000 0x8000000>; -+ }; -+ -+ aliases { -+ serial1 = &uart1; -+ gpio0 = &gpio0; -+ gpio1 = &gpio1; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <100>; -+ -+ power { -+ label = "power"; -+ gpios = <&gpio0 0 1>; -+ linux,code = <0x198>; -+ }; -+ -+ recovery { -+ label = "recovery"; -+ gpios = <&gpio0 4 1>; -+ linux,code = <0xab>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ a0 { -+ label = "activity0"; -+ gpios = <&gpio0 25 0>; -+ default-state = "keep"; -+ }; -+ -+ a1 { -+ label = "activity1"; -+ gpios = <&gpio0 26 0>; -+ default-state = "keep"; -+ }; -+ -+ a2 { -+ label = "activity2"; -+ gpios = <&gpio0 5 0>; -+ default-state = "keep"; -+ }; -+ -+ a3 { -+ label = "activity3"; -+ gpios = <&gpio0 6 0>; -+ default-state = "keep"; -+ }; -+ -+ a4 { -+ label = "activity4"; -+ gpios = <&gpio0 7 0>; -+ default-state = "keep"; -+ }; -+ -+ a5 { -+ label = "activity5"; -+ gpios = <&gpio1 2 0>; -+ default-state = "keep"; -+ }; -+ }; -+ -+ i2c-gpio { -+ compatible = "i2c-gpio"; -+ gpios = <&gpio0 3 0 /* sda */ -+ &gpio0 2 0 /* scl */ -+ >; -+ i2c-gpio,delay-us = <2>; /* ~100 kHz */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rtc0: rtc@48 { -+ compatible = "st,m41t00"; -+ reg = <0x68>; -+ }; -+ }; -+}; -+ -+&uart1 { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -0,0 +1,94 @@ -+/* -+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 -+ * -+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> -+ * -+ * Licensed under GPLv2 or later -+ */ -+ -+/dts-v1/; -+#include "ox820.dtsi" -+ -+/ { -+ model = "Cloud Engines PogoPlug Series 3"; -+ -+ compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; -+ -+ chosen { -+ bootargs = "earlyprintk"; -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory { -+ /* 128Mbytes DDR */ -+ reg = <0x60000000 0x8000000>; -+ }; -+ -+ aliases { -+ serial0 = &uart0; -+ gpio0 = &gpio0; -+ gpio1 = &gpio1; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ blue { -+ label = "pogoplug:blue"; -+ gpios = <&gpio0 2 0>; -+ default-state = "keep"; -+ }; -+ -+ orange { -+ label = "pogoplug:orange"; -+ gpios = <&gpio1 16 1>; -+ default-state = "keep"; -+ }; -+ -+ green { -+ label = "pogoplug:green"; -+ gpios = <&gpio1 17 1>; -+ default-state = "keep"; -+ }; -+ }; -+}; -+ -+&uart0 { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart0>; -+}; -+ -+&nandc { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_nand>; -+ -+ nand@0 { -+ reg = <0>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ nand-ecc-mode = "soft"; -+ nand-ecc-algo = "hamming"; -+ -+ partition@0 { -+ label = "boot"; -+ reg = <0x00000000 0x00e00000>; -+ read-only; -+ }; -+ -+ partition@e00000 { -+ label = "ubi"; -+ reg = <0x00e00000 0x07200000>; -+ }; -+ }; -+}; -+ -+ða { -+ status = "okay"; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_etha_mdio>; -+}; ---- a/arch/arm/boot/dts/wd-mbwe.dts -+++ /dev/null -@@ -1,112 +0,0 @@ --/* -- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition -- * -- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> -- * -- * Licensed under GPLv2 or later -- */ -- --/dts-v1/; --#include "ox810se.dtsi" -- --/ { -- model = "Western Digital My Book World Edition"; -- -- compatible = "wd,mbwe", "oxsemi,ox810se"; -- -- chosen { -- bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; -- }; -- -- memory { -- /* 128Mbytes DDR */ -- reg = <0x48000000 0x8000000>; -- }; -- -- aliases { -- serial1 = &uart1; -- gpio0 = &gpio0; -- gpio1 = &gpio1; -- }; -- -- gpio-keys-polled { -- compatible = "gpio-keys-polled"; -- #address-cells = <1>; -- #size-cells = <0>; -- poll-interval = <100>; -- -- power { -- label = "power"; -- gpios = <&gpio0 0 1>; -- linux,code = <0x198>; -- }; -- -- recovery { -- label = "recovery"; -- gpios = <&gpio0 4 1>; -- linux,code = <0xab>; -- }; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- a0 { -- label = "activity0"; -- gpios = <&gpio0 25 0>; -- default-state = "keep"; -- }; -- -- a1 { -- label = "activity1"; -- gpios = <&gpio0 26 0>; -- default-state = "keep"; -- }; -- -- a2 { -- label = "activity2"; -- gpios = <&gpio0 5 0>; -- default-state = "keep"; -- }; -- -- a3 { -- label = "activity3"; -- gpios = <&gpio0 6 0>; -- default-state = "keep"; -- }; -- -- a4 { -- label = "activity4"; -- gpios = <&gpio0 7 0>; -- default-state = "keep"; -- }; -- -- a5 { -- label = "activity5"; -- gpios = <&gpio1 2 0>; -- default-state = "keep"; -- }; -- }; -- -- i2c-gpio { -- compatible = "i2c-gpio"; -- gpios = <&gpio0 3 0 /* sda */ -- &gpio0 2 0 /* scl */ -- >; -- i2c-gpio,delay-us = <2>; /* ~100 kHz */ -- #address-cells = <1>; -- #size-cells = <0>; -- -- rtc0: rtc@48 { -- compatible = "st,m41t00"; -- reg = <0x68>; -- }; -- }; --}; -- --&uart1 { -- status = "okay"; -- -- pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_uart1>; --}; |