diff options
Diffstat (limited to 'target/linux/orion')
6 files changed, 946 insertions, 0 deletions
diff --git a/target/linux/orion/config-4.9 b/target/linux/orion/config-4.9 new file mode 100644 index 0000000000..56ae5ee98a --- /dev/null +++ b/target/linux/orion/config-4.9 @@ -0,0 +1,246 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_ARCH_MULTI_V4 is not set +# CONFIG_ARCH_MULTI_V4T is not set +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_ORION5X_DT is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_PATCH_PHYS_VIRT=y +# CONFIG_ARM_THUMB is not set +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 earlyprintk" +CONFIG_CMDLINE_FORCE=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_FEROCEON=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FEROCEON=y +CONFIG_CPU_FEROCEON_OLD_ID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_TLB_FEROCEON=y +CONFIG_CPU_USE_DOMAINS=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_LL_UART_8250=y +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0xf1012000 +CONFIG_DEBUG_UART_VIRT=0xfe012000 +# CONFIG_DEBUG_USER is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ENGINE_RAID=y +CONFIG_DMA_OF=y +CONFIG_DNOTIFY=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_MVEBU=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +# CONFIG_HAVE_ARCH_BITREVERSE is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MV64XXX=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_LEDS_GPIO=y +CONFIG_LIBFDT=y +# CONFIG_MACH_D2NET_DT is not set +# CONFIG_MACH_DB88F5281 is not set +# CONFIG_MACH_DNS323 is not set +# CONFIG_MACH_DT2 is not set +# CONFIG_MACH_KUROBOX_PRO is not set +# CONFIG_MACH_LINKSTATION_LSCHL is not set +# CONFIG_MACH_LINKSTATION_LS_HGL is not set +# CONFIG_MACH_LINKSTATION_MINI is not set +# CONFIG_MACH_LINKSTATION_PRO is not set +# CONFIG_MACH_MSS2_DT is not set +# CONFIG_MACH_MV2120 is not set +# CONFIG_MACH_NET2BIG is not set +# CONFIG_MACH_RD88F5181L_FXO is not set +# CONFIG_MACH_RD88F5181L_GE is not set +# CONFIG_MACH_RD88F5182 is not set +# CONFIG_MACH_RD88F5182_DT is not set +# CONFIG_MACH_RD88F6183AP_GE is not set +CONFIG_MACH_TERASTATION_PRO2=y +# CONFIG_MACH_TS209 is not set +# CONFIG_MACH_TS409 is not set +# CONFIG_MACH_TS78XX is not set +CONFIG_MACH_WN802T=y +CONFIG_MACH_WNR854T=y +CONFIG_MACH_WRT350N_V2=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MMC=y +CONFIG_MMC_MVSDIO=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MV643XX_ETH=y +CONFIG_MVEBU_MBUS=y +CONFIG_MVMDIO=y +# CONFIG_MVNETA is not set +CONFIG_MV_XOR=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_KUSER_HELPERS=y +CONFIG_NEED_PER_CPU_KM=y +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NO_BOOTMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_ORION_WATCHDOG=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +# CONFIG_PCI_DOMAINS_GENERIC is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PLAT_ORION=y +CONFIG_PLAT_ORION_LEGACY=y +CONFIG_RATIONAL=y +# CONFIG_RCU_EXPERT is not set +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RTC_CLASS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_SCHED_INFO is not set +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +CONFIG_SRAM=y +CONFIG_SRCU=y +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFP is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch b/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch new file mode 100644 index 0000000000..764f992288 --- /dev/null +++ b/target/linux/orion/patches-4.9/000-arm_openwrt_machtypes.patch @@ -0,0 +1,8 @@ +--- a/arch/arm/tools/mach-types ++++ b/arch/arm/tools/mach-types +@@ -1006,3 +1006,5 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572 + eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573 + domotab MACH_DOMOTAB DOMOTAB 4574 + pfla03 MACH_PFLA03 PFLA03 4575 ++dt2 MACH_DT2 DT2 1514 ++wn802t MACH_WN802T WN802T 3306 diff --git a/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch b/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch new file mode 100644 index 0000000000..89c2c9420b --- /dev/null +++ b/target/linux/orion/patches-4.9/100-wrt350nv2_openwrt_partition_map.patch @@ -0,0 +1,32 @@ +--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c ++++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c +@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n + { + .name = "kernel", + .offset = 0x00000000, +- .size = 0x00760000, ++ .size = 0x00140000, // change to kernel mtd size here (1/3) + }, { + .name = "rootfs", +- .offset = 0x001a0000, +- .size = 0x005c0000, ++ .offset = 0x00140000, // change to kernel mtd size here (2/3) ++ .size = 0x00610000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size> + }, { + .name = "lang", + .offset = 0x00760000, +@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n + .name = "u-boot", + .offset = 0x007c0000, + .size = 0x00040000, ++ }, { ++ .name = "eRcOmM_do_not_touch", ++ .offset = 0x00750000, ++ .size = 0x00010000, // erasesize ++ }, { ++ .name = "image", // for sysupgrade ++ .offset = 0x00000000, ++ .size = 0x00750000, + }, + }; + diff --git a/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch b/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch new file mode 100644 index 0000000000..881cfb773e --- /dev/null +++ b/target/linux/orion/patches-4.9/101-wnr854t_partition_map.patch @@ -0,0 +1,25 @@ +--- a/arch/arm/mach-orion5x/wnr854t-setup.c ++++ b/arch/arm/mach-orion5x/wnr854t-setup.c +@@ -57,15 +57,19 @@ static struct mtd_partition wnr854t_nor_ + { + .name = "kernel", + .offset = 0x00000000, +- .size = 0x00100000, ++ .size = 0x00140000, + }, { + .name = "rootfs", +- .offset = 0x00100000, +- .size = 0x00660000, ++ .offset = 0x00140000, ++ .size = 0x00620000, + }, { + .name = "uboot", + .offset = 0x00760000, + .size = 0x00040000, ++ }, { ++ .name = "image", // for sysupgrade ++ .offset = 0x00000000, ++ .size = 0x00760000, + }, + }; + diff --git a/target/linux/orion/patches-4.9/200-dt2_board_support.patch b/target/linux/orion/patches-4.9/200-dt2_board_support.patch new file mode 100644 index 0000000000..5528069cd5 --- /dev/null +++ b/target/linux/orion/patches-4.9/200-dt2_board_support.patch @@ -0,0 +1,562 @@ +--- a/arch/arm/mach-orion5x/Kconfig ++++ b/arch/arm/mach-orion5x/Kconfig +@@ -48,6 +48,13 @@ config MACH_RD88F5182_DT + Say 'Y' here if you want your kernel to support the Marvell + Orion-NAS (88F5182) RD2, Flattened Device Tree. + ++config MACH_DT2 ++ bool "Freecom DataTank Gateway" ++ select I2C_BOARDINFO ++ help ++ Say 'Y' here if you want your kernel to support the ++ Freecom DataTank Gateway ++ + config MACH_KUROBOX_PRO + bool "KuroBox Pro" + select I2C_BOARDINFO if I2C +--- a/arch/arm/mach-orion5x/Makefile ++++ b/arch/arm/mach-orion5x/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_MACH_TS78XX) += ts78xx-setu + obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o + obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o + obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o ++obj-$(CONFIG_MACH_DT2) += dt2-setup.o + obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o + obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o + obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o +--- /dev/null ++++ b/arch/arm/mach-orion5x/dt2-common.h +@@ -0,0 +1,82 @@ ++#ifndef __INC_DT2_COMMON_H ++#define __INC_DT2_COMMON_H ++ ++#define ATAG_MV_UBOOT 0x41000403 ++ ++struct tag_mv_uboot { ++ u32 uboot_version; ++ u32 tclk; ++ u32 sysclk; ++ u32 isUsbHost; ++ u32 overEthAddr; ++ u8 dt2_eeprom[256]; ++}; ++ ++#define DT2_EEPROM_ADDR 0x50 ++#define DT2_EEPROM_OFFSET 0 ++#define DT2_EEPROM_LENGTH 256 ++ ++#define DT2_SERIAL_NUMBER_DEFAULT "run on default\0" ++#define DT2_REVISION_DEFAULT_INIT 0xFF ++#define DT2_CONFIG_FLAGS_DEFAULT 0x00 ++ ++#define _PACKED_ __attribute__((packed)) ++ ++struct DT2_EEPROM_SD_CONFIG { ++ unsigned int ram_1; ++ unsigned int ram_2; ++ unsigned int ram_3; ++ unsigned int ram_4; ++ unsigned char ram_5; ++ unsigned char ram_6; ++ unsigned short ram_7; ++ unsigned int magic_id; ++ } _PACKED_; // 24 Bytes in total ++ ++struct DT2_EEPROM_FC_CONFIG { ++ unsigned char rtc_sts_mask; ++ unsigned char rtc_sts_init; ++ unsigned char rtc_int_mask; ++ unsigned char rtc_int_init; ++ unsigned char rtc_atrim_init; ++ unsigned char rtc_dtrim_init; ++ unsigned char dummy1; ++ unsigned char dummy2; ++ unsigned char dt2_config_flags; /* 0x80 to load rtc_values to RTC */ ++ unsigned char dt2_revision; /* upper nibble is HW, lower nibble is FW */ ++ unsigned char dt2_serial_number[16]; /* Serial number of DT-2 */ ++ } _PACKED_; // 26 Bytes in total ++ ++#define CFG_LOAD_RTC_VALUES 0x80 ++ ++struct DT2_EEPROM_GW_CONFIG { ++ unsigned int dummy1; ++ unsigned int dummy2; ++ unsigned int dummy3; ++ unsigned char dummy4; ++ unsigned char tos_video_val1; ++ unsigned char tos_video_val2; ++ unsigned char tos_voip_val; ++ unsigned char qos_igmp_cfg; ++ unsigned char num_of_ifs; ++ unsigned short vlan_ports_if[3]; ++ unsigned char mac_addr[3][6]; ++ } _PACKED_; // 42 Bytes in total ++ ++#define _SIZE_OF_ALL_STRUCTS_ (sizeof(struct DT2_EEPROM_SD_CONFIG) + sizeof(struct DT2_EEPROM_FC_CONFIG) + sizeof(struct DT2_EEPROM_GW_CONFIG)) ++ ++// MV = EEPROM - SD - FC - GW - CRC ++struct DT2_EEPROM_MV_CONFIG { ++ unsigned int reg_addr[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)]; ++ unsigned int reg_data[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)]; ++ } _PACKED_; ++ ++struct DT2_EEPROM_STRUCT { ++ struct DT2_EEPROM_MV_CONFIG mv; ++ struct DT2_EEPROM_SD_CONFIG sd; ++ struct DT2_EEPROM_FC_CONFIG fc; ++ struct DT2_EEPROM_GW_CONFIG gw; ++ unsigned int crc; ++ } _PACKED_; ++ ++#endif +--- /dev/null ++++ b/arch/arm/mach-orion5x/dt2-setup.c +@@ -0,0 +1,448 @@ ++/* ++ * arch/arm/mach-orion5x/dt2-setup.c ++ * ++ * Freecom DataTank Gateway Setup ++ * ++ * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv> ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/pci.h> ++#include <linux/irq.h> ++#include <linux/mtd/physmap.h> ++#include <linux/mv643xx_eth.h> ++#include <linux/ethtool.h> ++#include <linux/if_ether.h> ++#include <net/dsa.h> ++#include <linux/ata_platform.h> ++#include <linux/i2c.h> ++#include <linux/reboot.h> ++#include <linux/interrupt.h> ++#include <asm/mach-types.h> ++#include <asm/gpio.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/pci.h> ++#include "orion5x.h" ++#include "common.h" ++#include "mpp.h" ++ ++/***************************************************************************** ++ * DT2 local ++ ****************************************************************************/ ++#include <asm/setup.h> ++#include "dt2-common.h" ++ ++u32 mvUbootVer = 0; ++u32 mvTclk = 166666667; ++u32 mvSysclk = 200000000; ++u32 mvIsUsbHost = 1; ++u32 overEthAddr = 0; ++u32 gBoardId = -1; ++struct DT2_EEPROM_STRUCT dt2_eeprom; ++ ++/***************************************************************************** ++ * DT2 Info ++ ****************************************************************************/ ++/* ++ * PCI ++ */ ++ ++#define DT2_PCI_SLOT0_OFFS 7 ++#define DT2_PCI_SLOT0_IRQ_A_PIN 3 ++#define DT2_PCI_SLOT0_IRQ_B_PIN 2 ++ ++#define DT2_PIN_GPIO_SYNC 25 ++#define DT2_PIN_GPIO_POWER 24 ++#define DT2_PIN_GPIO_UNPLUG1 23 ++#define DT2_PIN_GPIO_UNPLUG2 22 ++#define DT2_PIN_GPIO_RESET 4 ++ ++#define DT2_NOR_BOOT_BASE 0xf4000000 ++#define DT2_NOR_BOOT_SIZE SZ_512K ++ ++#define DT2_LEDS_BASE 0xfa000000 ++#define DT2_LEDS_SIZE SZ_1K ++ ++/***************************************************************************** ++ * 512K NOR Flash on Device bus Boot CS ++ ****************************************************************************/ ++ ++static struct mtd_partition dt2_partitions[] = { ++ { ++ .name = "u-boot", ++ .size = 0x00080000, ++ .offset = 0, ++ }, ++}; ++ ++static struct physmap_flash_data dt2_nor_flash_data = { ++ .width = 1, /* 8 bit bus width */ ++ .parts = dt2_partitions, ++ .nr_parts = ARRAY_SIZE(dt2_partitions) ++}; ++ ++static struct resource dt2_nor_flash_resource = { ++ .flags = IORESOURCE_MEM, ++ .start = DT2_NOR_BOOT_BASE, ++ .end = DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1, ++}; ++ ++static struct platform_device dt2_nor_flash = { ++ .name = "physmap-flash", ++ .id = 0, ++ .dev = { ++ .platform_data = &dt2_nor_flash_data, ++ }, ++ .resource = &dt2_nor_flash_resource, ++ .num_resources = 1, ++}; ++ ++/***************************************************************************** ++ * PCI ++ ****************************************************************************/ ++ ++void __init dt2_pci_preinit(void) ++{ ++ int pin, irq; ++ ++ /* ++ * Configure PCI GPIO IRQ pins ++ */ ++ pin = DT2_PCI_SLOT0_IRQ_A_PIN; ++ if (gpio_request(pin, "PCI IntA") == 0) { ++ if (gpio_direction_input(pin) == 0) { ++ irq = gpio_to_irq(pin); ++ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ++ printk (KERN_INFO "PCI IntA IRQ: %d\n", irq); ++ } else { ++ printk(KERN_ERR "dt2_pci_preinit failed to " ++ "irq_set_irq_type pin %d\n", pin); ++ gpio_free(pin); ++ } ++ } else { ++ printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin); ++ } ++ ++ pin = DT2_PCI_SLOT0_IRQ_B_PIN; ++ if (gpio_request(pin, "PCI IntB") == 0) { ++ if (gpio_direction_input(pin) == 0) { ++ irq = gpio_to_irq(pin); ++ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); ++ printk (KERN_INFO "PCI IntB IRQ: %d\n", irq); ++ } else { ++ printk(KERN_ERR "dt2_pci_preinit failed to " ++ "irq_set_irq_type pin %d\n", pin); ++ gpio_free(pin); ++ } ++ } else { ++ printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin); ++ } ++} ++ ++static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ int irq; ++ ++ /* ++ * Check for devices with hard-wired IRQs. ++ */ ++ irq = orion5x_pci_map_irq(dev, slot, pin); ++ if (irq != -1){ ++ printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq); ++ return irq; ++ } ++ ++ /* ++ * PCI IRQs are connected via GPIOs ++ */ ++ switch (slot - DT2_PCI_SLOT0_OFFS) { ++ case 0: ++ if (pin == 1){ ++ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN); ++ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq); ++ } ++ else { ++ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN); ++ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq); ++ } ++ default: ++ irq = -1; ++ printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq); ++ } ++ ++ return irq; ++} ++ ++static struct hw_pci dt2_pci __initdata = { ++ .nr_controllers = 2, ++ .preinit = dt2_pci_preinit, ++ .setup = orion5x_pci_sys_setup, ++ .scan = orion5x_pci_sys_scan_bus, ++ .map_irq = dt2_pci_map_irq, ++}; ++ ++static int __init dt2_pci_init(void) ++{ ++ if (machine_is_dt2()) ++ pci_common_init(&dt2_pci); ++ ++ return 0; ++} ++ ++subsys_initcall(dt2_pci_init); ++ ++/***************************************************************************** ++ * Ethernet ++ ****************************************************************************/ ++ ++static struct mv643xx_eth_platform_data dt2_eth_data = { ++ .phy_addr = MV643XX_ETH_PHY_NONE, ++ .speed = SPEED_1000, ++ .duplex = DUPLEX_FULL, ++}; ++ ++static struct dsa_chip_data dt2_switch_chip_data = { ++ .port_names[0] = "wan", ++ .port_names[1] = "lan1", ++ .port_names[2] = "lan2", ++ .port_names[3] = "cpu", ++ .port_names[4] = "lan3", ++ .port_names[5] = "lan4", ++}; ++ ++static struct dsa_platform_data dt2_switch_plat_data = { ++ .nr_chips = 1, ++ .chip = &dt2_switch_chip_data, ++}; ++ ++/***************************************************************************** ++ * RTC ISL1208 on I2C bus ++ ****************************************************************************/ ++static struct i2c_board_info __initdata dt2_i2c_rtc = { ++ I2C_BOARD_INFO("isl1208", 0x6F), ++}; ++ ++/***************************************************************************** ++ * Sata ++ ****************************************************************************/ ++static struct mv_sata_platform_data dt2_sata_data = { ++ .n_ports = 2, ++}; ++ ++/***************************************************************************** ++ * General Setup ++ ****************************************************************************/ ++static unsigned int dt2_mpp_modes[] __initdata = { ++ MPP0_GPIO, // RTC interrupt ++ MPP1_GPIO, // 88e6131 interrupt ++ MPP2_GPIO, // PCI_intB ++ MPP3_GPIO, // PCI_intA ++ MPP4_GPIO, // reset button switch ++ MPP5_GPIO, ++ MPP6_GPIO, ++ MPP7_GPIO, ++ MPP8_GPIO, ++ MPP9_GIGE, /* GE_RXERR */ ++ MPP10_GPIO, // usb ++ MPP11_GPIO, // usb ++ MPP12_GIGE, // GE_TXD[4] ++ MPP13_GIGE, // GE_TXD[5] ++ MPP14_GIGE, // GE_TXD[6] ++ MPP15_GIGE, // GE_TXD[7] ++ MPP16_GIGE, // GE_RXD[4] ++ MPP17_GIGE, // GE_RXD[5] ++ MPP18_GIGE, // GE_RXD[6] ++ MPP19_GIGE, // GE_RXD[7] ++ 0, ++}; ++ ++/***************************************************************************** ++ * LEDS ++ ****************************************************************************/ ++static struct platform_device dt2_leds = { ++ .name = "dt2-led", ++ .id = -1, ++}; ++ ++/**************************************************************************** ++ * GPIO key ++ ****************************************************************************/ ++static irqreturn_t dt2_reset_handler(int irq, void *dev_id) ++{ ++ /* This is the paper-clip reset which does an emergency reboot. */ ++ printk(KERN_INFO "Restarting system.\n"); ++ machine_restart(NULL); ++ ++ /* This should never be reached. */ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t dt2_power_handler(int irq, void *dev_id) ++{ ++ printk(KERN_INFO "Shutting down system.\n"); ++ machine_power_off(); ++ return IRQ_HANDLED; ++} ++ ++static void __init dt2_init(void) ++{ ++ /* ++ * Setup basic Orion functions. Need to be called early. ++ */ ++ orion5x_init(); ++ ++ orion5x_mpp_conf(dt2_mpp_modes); ++ ++ /* ++ * Configure peripherals. ++ */ ++ ++ orion5x_uart0_init(); ++ orion5x_ehci0_init(); ++ orion5x_ehci1_init(); ++ orion5x_i2c_init(); ++ orion5x_sata_init(&dt2_sata_data); ++ orion5x_xor_init(); ++ ++ printk(KERN_INFO "U-Boot parameters:\n"); ++ printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId); ++ ++ printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number); ++ printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision); ++ printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n", ++ dt2_eeprom.gw.mac_addr[0]); ++ printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n", ++ dt2_eeprom.gw.mac_addr[1]); ++ ++ orion5x_eth_init(&dt2_eth_data); ++ memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6); ++ orion5x_eth_switch_init(&dt2_switch_plat_data); ++ ++ i2c_register_board_info(0, &dt2_i2c_rtc, 1); ++ ++ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, ++ ORION_MBUS_DEVBUS_BOOT_ATTR, ++ DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE); ++ ++ platform_device_register(&dt2_nor_flash); ++ ++ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), ++ ORION_MBUS_DEVBUS_ATTR(0), ++ DT2_LEDS_BASE, DT2_LEDS_SIZE); ++ platform_device_register(&dt2_leds); ++ ++ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler, ++ IRQF_TRIGGER_LOW, ++ "DT2: Reset button", NULL) < 0) { ++ ++ printk("DT2: Reset Button IRQ %d not available\n", ++ gpio_to_irq(DT2_PIN_GPIO_RESET)); ++ } ++ ++ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler, ++ IRQF_TRIGGER_LOW, ++ "DT2: Power button", NULL) < 0) { ++ ++ printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n", ++ gpio_to_irq(DT2_PIN_GPIO_POWER)); ++ } ++} ++ ++static int __init parse_tag_dt2_uboot(const struct tag *t) ++{ ++ struct tag_mv_uboot *mv_uboot; ++ ++ // Get pointer to our block ++ mv_uboot = (struct tag_mv_uboot*)&t->u; ++ mvTclk = mv_uboot->tclk; ++ mvSysclk = mv_uboot->sysclk; ++ mvUbootVer = mv_uboot->uboot_version; ++ mvIsUsbHost = mv_uboot->isUsbHost; ++ ++ // Some clock fixups ++ if(mvTclk == 166000000) mvTclk = 166666667; ++ else if(mvTclk == 133000000) mvTclk = 133333333; ++ else if(mvSysclk == 166000000) mvSysclk = 166666667; ++ ++ gBoardId = (mvUbootVer & 0xff); ++ ++ //DT2 specific data ++ memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT)); ++ ++ return 0; ++} ++__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot); ++ ++/* ++ * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to ++ * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit" ++ * at the end. It is important to flash OpenWrt image from original Freecom firmware. ++ * ++ * Vanilla kernel should use "tag_fixup_mem32" function. ++ */ ++static void __init openwrt_fixup(struct tag *t, char **from) ++{ ++ char *p = NULL; ++ static char openwrt_init_tag[] __initdata = " init=/etc/preinit"; ++ ++ for (; t->hdr.size; t = tag_next(t)){ ++ /* Locate the Freecom cmdline */ ++ if (t->hdr.tag == ATAG_CMDLINE) { ++ p = t->u.cmdline.cmdline; ++ printk("%s(%d): Found cmdline '%s' at 0x%0lx\n", ++ __FUNCTION__, __LINE__, p, (unsigned long)p); ++ } ++ /* ++ * Many orion-based systems have buggy bootloader implementations. ++ * This is a common fixup for bogus memory tags. ++ */ ++ if (t->hdr.tag == ATAG_MEM && ++ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || ++ t->u.mem.start & ~PAGE_MASK)) { ++ printk(KERN_WARNING ++ "Clearing invalid memory bank %dKB@0x%08x\n", ++ t->u.mem.size / 1024, t->u.mem.start); ++ t->hdr.tag = 0; ++ } ++ } ++ ++ printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t); ++ ++ /* Overwrite the end of the table with a new cmdline tag. */ ++ t->hdr.tag = ATAG_CMDLINE; ++ t->hdr.size = ++ (sizeof (struct tag_header) + ++ strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2; ++ ++ strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE); ++ strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag, ++ COMMAND_LINE_SIZE - strlen(p)); ++ ++ printk("%s(%d): New cmdline '%s' at 0x%0lx\n", ++ __FUNCTION__, __LINE__, ++ t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline); ++ ++ t = tag_next(t); ++ ++ printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t); ++ ++ t->hdr.tag = ATAG_NONE; ++ t->hdr.size = 0; ++} ++ ++/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */ ++MACHINE_START(DT2, "Freecom DataTank Gateway") ++ /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */ ++ .atag_offset = 0x100, ++ .init_machine = dt2_init, ++ .map_io = orion5x_map_io, ++ .init_irq = orion5x_init_irq, ++ .init_time = orion5x_timer_init, ++ .fixup = openwrt_fixup, //tag_fixup_mem32, ++MACHINE_END diff --git a/target/linux/orion/patches-4.9/210-wn802t_support.patch b/target/linux/orion/patches-4.9/210-wn802t_support.patch new file mode 100644 index 0000000000..a274beedc3 --- /dev/null +++ b/target/linux/orion/patches-4.9/210-wn802t_support.patch @@ -0,0 +1,73 @@ +--- a/arch/arm/mach-orion5x/Kconfig ++++ b/arch/arm/mach-orion5x/Kconfig +@@ -159,10 +159,13 @@ config MACH_MSS2_DT + Maxtor Shared Storage II platform. + + config MACH_WNR854T +- bool "Netgear WNR854T" ++ bool "Netgear WNR854T / WN802T" + help + Say 'Y' here if you want your kernel to support the +- Netgear WNR854T platform. ++ Netgear WNR854T or WN802T platform. ++ ++config MACH_WN802T ++ def_bool MACH_WNR854T + + config MACH_RD88F5181L_GE + bool "Marvell Orion-VoIP GE Reference Design" +--- a/arch/arm/mach-orion5x/wnr854t-setup.c ++++ b/arch/arm/mach-orion5x/wnr854t-setup.c +@@ -115,6 +115,15 @@ static struct dsa_platform_data __initda + .chip = &wnr854t_switch_chip_data, + }; + ++static struct dsa_chip_data wn802t_switch_chip_data = { ++ .port_names[2] = "wan", ++ .port_names[3] = "cpu", ++}; ++ ++static struct dsa_platform_data wn802t_switch_plat_data = { ++ .nr_chips = 1, ++ .chip = &wn802t_switch_chip_data, ++}; + static void __init wnr854t_init(void) + { + /* +@@ -128,7 +137,10 @@ static void __init wnr854t_init(void) + * Configure peripherals. + */ + orion5x_eth_init(&wnr854t_eth_data); +- orion5x_eth_switch_init(&wnr854t_switch_plat_data); ++ if (machine_is_wn802t()) ++ orion5x_eth_switch_init(&wn802t_switch_plat_data); ++ else ++ orion5x_eth_switch_init(&wnr854t_switch_plat_data); + orion5x_uart0_init(); + + mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, +@@ -168,7 +180,7 @@ static struct hw_pci wnr854t_pci __initd + + static int __init wnr854t_pci_init(void) + { +- if (machine_is_wnr854t()) ++ if (machine_is_wnr854t() || machine_is_wn802t()) + pci_common_init(&wnr854t_pci); + + return 0; +@@ -187,3 +199,15 @@ MACHINE_START(WNR854T, "Netgear WNR854T" + .fixup = tag_fixup_mem32, + .restart = orion5x_restart, + MACHINE_END ++ ++MACHINE_START(WN802T, "Netgear WN802T") ++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ ++ .atag_offset = 0x100, ++ .init_machine = wnr854t_init, ++ .map_io = orion5x_map_io, ++ .init_early = orion5x_init_early, ++ .init_irq = orion5x_init_irq, ++ .init_time = orion5x_timer_init, ++ .fixup = tag_fixup_mem32, ++ .restart = orion5x_restart, ++MACHINE_END |