diff options
Diffstat (limited to 'target/linux/mvebu')
7 files changed, 909 insertions, 582 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts deleted file mode 100644 index c6e180eb3b..0000000000 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-388-clearfog.dts +++ /dev/null @@ -1,456 +0,0 @@ -/* - * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) - * - * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "armada-388.dtsi" -#include "armada-38x-solidrun-microsom.dtsi" - -/ { - model = "SolidRun Clearfog A1"; - compatible = "solidrun,clearfog-a1", "marvell,armada388", - "marvell,armada385", "marvell,armada380"; - - aliases { - /* So that mvebu u-boot can update the MAC addresses */ - ethernet1 = ð0; - ethernet2 = ð1; - ethernet3 = ð2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - soc { - internal-regs { - ethernet@30000 { - phy-mode = "sgmii"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - phy-mode = "sgmii"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - i2c@11000 { - /* Is there anything on this? */ - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - usb3_power { - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb3-power"; - }; - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - sfp_los { - /* SFP loss of signal */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-los"; - }; - sfp_tx_fault { - /* SFP laser fault */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-tx-fault"; - }; - sfp_tx_disable { - /* SFP transmit disable */ - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "sfp-tx-disable"; - }; - sfp_mod_def0 { - /* SFP module present */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_LOW>; - input; - line-name = "sfp-mod-def0"; - }; - }; - - /* The MCP3021 is 100kHz clock only */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* Also something at 0x64 */ - }; - - i2c@11100 { - /* - * Routed to SFP, mikrobus, and PCIe. - * SFP limits this to 100kHz, and requires - * an AT24C01A/02/04 with address pins tied - * low, which takes addresses 0x50 and 0x51. - * Mikrobus doesn't specify beyond an I2C - * bus being present. - * PCIe uses ARP to assign addresses, or - * 0x63-0x64. - */ - clock-frequency = <100000>; - pinctrl-0 = <&clearfog_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - mdio@72004 { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_i2c1_pins: i2c1-pins { - /* SFP, PCIe, mSATA, mikrobus */ - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - clearfog_sdhci_pins: clearfog-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - mikro_pins: mikro-pins { - /* int: mpp22 rst: mpp29 */ - marvell,pins = "mpp22", "mpp29"; - marvell,function = "gpio"; - }; - mikro_spi_pins: mikro-spi-pins { - marvell,pins = "mpp43"; - marvell,function = "spi1"; - }; - mikro_uart_pins: mikro-uart-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "ua1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - - sata@a8000 { - /* pinctrl? */ - status = "okay"; - }; - - sata@e0000 { - /* pinctrl? */ - status = "okay"; - }; - - sdhci@d8000 { - bus-width = <4>; - cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - no-1-8-v; - pinctrl-0 = <&clearfog_sdhci_pins - &clearfog_sdhci_cd_pins>; - pinctrl-names = "default"; - status = "okay"; - vmmc = <®_3p3v>; - wp-inverted; - }; - - serial@12100 { - /* mikrobus uart */ - pinctrl-0 = <&mikro_uart_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - spi@10680 { - /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; - }; - }; - - usb@58000 { - /* CON3, nearest power. */ - status = "okay"; - }; - - usb3@f0000 { - /* CON2, nearest CPU, USB2 only. */ - status = "okay"; - }; - - usb3@f8000 { - /* CON7 */ - status = "okay"; - }; - }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * the mini-PCIe connectors on the board. - */ - pcie@2,0 { - /* Port 1, Lane 0. CON3, nearest power. */ - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - pcie@3,0 { - /* Port 2, Lane 0. CON2, nearest CPU. */ - reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - }; - - dsa@0 { - compatible = "marvell,dsa"; - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; - pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <0>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4 0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "lan5"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&rear_button_pins>; - pinctrl-names = "default"; - - button_0 { - /* The rear SW3 button */ - label = "Rear Button"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - linux,can-disable; - linux,code = <BTN_0>; - }; - }; -}; diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi deleted file mode 100644 index 3f792a563c..0000000000 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Device Tree file for SolidRun Armada 38x Microsom - * - * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 - MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; - - internal-regs { - ethernet@70000 { - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - phy = <&phy_dedicated>; - phy-mode = "rgmii-id"; - status = "okay"; - }; - - mdio@72004 { - /* - * Add the phy clock here, so the phy can be - * accessed to read its IDs prior to binding - * with the driver. - */ - pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - microsom_phy_clk_pins: microsom-phy-clk-pins { - marvell,pins = "mpp45"; - marvell,function = "ref"; - }; - }; - - rtc@a3800 { - /* - * If the rtc doesn't work, run "date reset" - * twice in u-boot. - */ - status = "okay"; - }; - - serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - }; -}; diff --git a/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch new file mode 100644 index 0000000000..abf2a63425 --- /dev/null +++ b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch @@ -0,0 +1,611 @@ +From 4c945e8556ec7ea5b19d4f8721b212f468656e0d Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@arm.linux.org.uk> +Date: Sun, 6 Dec 2015 21:52:06 +0000 +Subject: [PATCH] ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file + +Add support for the SolidRun Armada 388 Clearfog A1 board. This board +has an Armada 388 microsom, dedicated gigabit ethernet, six switched +gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA +slot, and a MikroBUS connector to allow MikroBUS modules to be added. + +This DT file adds support for all board facilities with the exception +of full SFP support. + +Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> +Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> +Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/armada-388-clearfog.dts | 456 +++++++++++++++++++++ + .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 115 ++++++ + 3 files changed, 572 insertions(+) + create mode 100644 arch/arm/boot/dts/armada-388-clearfog.dts + create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -749,6 +749,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ + armada-385-linksys-caiman.dtb \ + armada-385-linksys-cobra.dtb \ + armada-385-linksys-shelby.dtb \ ++ armada-388-clearfog.dtb \ + armada-388-db.dtb \ + armada-388-gp.dtb \ + armada-388-rd.dtb +--- /dev/null ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -0,0 +1,456 @@ ++/* ++ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) ++ * ++ * Copyright (C) 2015 Russell King ++ * ++ * This board is in development; the contents of this file work with ++ * the A1 rev 2.0 of the board, which does not represent final ++ * production board. Things will change, don't expect this file to ++ * remain compatible info the future. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "armada-388.dtsi" ++#include "armada-38x-solidrun-microsom.dtsi" ++ ++/ { ++ model = "SolidRun Clearfog A1"; ++ compatible = "solidrun,clearfog-a1", "marvell,armada388", ++ "marvell,armada385", "marvell,armada380"; ++ ++ aliases { ++ /* So that mvebu u-boot can update the MAC addresses */ ++ ethernet1 = ð0; ++ ethernet2 = ð1; ++ ethernet3 = ð2; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ reg_3p3v: regulator-3p3v { ++ compatible = "regulator-fixed"; ++ regulator-name = "3P3V"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ soc { ++ internal-regs { ++ ethernet@30000 { ++ phy-mode = "sgmii"; ++ status = "okay"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ ethernet@34000 { ++ phy-mode = "sgmii"; ++ status = "okay"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ i2c@11000 { ++ /* Is there anything on this? */ ++ clock-frequency = <100000>; ++ pinctrl-0 = <&i2c0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ /* ++ * PCA9655 GPIO expander, up to 1MHz clock. ++ * 0-CON3 CLKREQ# ++ * 1-CON3 PERST# ++ * 2-CON2 PERST# ++ * 3-CON3 W_DISABLE ++ * 4-CON2 CLKREQ# ++ * 5-USB3 overcurrent ++ * 6-USB3 power ++ * 7-CON2 W_DISABLE ++ * 8-JP4 P1 ++ * 9-JP4 P4 ++ * 10-JP4 P5 ++ * 11-m.2 DEVSLP ++ * 12-SFP_LOS ++ * 13-SFP_TX_FAULT ++ * 14-SFP_TX_DISABLE ++ * 15-SFP_MOD_DEF0 ++ */ ++ expander0: gpio-expander@20 { ++ /* ++ * This is how it should be: ++ * compatible = "onnn,pca9655", ++ * "nxp,pca9555"; ++ * but you can't do this because of ++ * the way I2C works. ++ */ ++ compatible = "nxp,pca9555"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ reg = <0x20>; ++ ++ pcie1_0_clkreq { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_LOW>; ++ input; ++ line-name = "pcie1.0-clkreq"; ++ }; ++ pcie1_0_w_disable { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_LOW>; ++ output-low; ++ line-name = "pcie1.0-w-disable"; ++ }; ++ pcie2_0_clkreq { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_LOW>; ++ input; ++ line-name = "pcie2.0-clkreq"; ++ }; ++ pcie2_0_w_disable { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_LOW>; ++ output-low; ++ line-name = "pcie2.0-w-disable"; ++ }; ++ usb3_ilimit { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_LOW>; ++ input; ++ line-name = "usb3-current-limit"; ++ }; ++ usb3_power { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "usb3-power"; ++ }; ++ m2_devslp { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "m.2 devslp"; ++ }; ++ sfp_los { ++ /* SFP loss of signal */ ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "sfp-los"; ++ }; ++ sfp_tx_fault { ++ /* SFP laser fault */ ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "sfp-tx-fault"; ++ }; ++ sfp_tx_disable { ++ /* SFP transmit disable */ ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "sfp-tx-disable"; ++ }; ++ sfp_mod_def0 { ++ /* SFP module present */ ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_LOW>; ++ input; ++ line-name = "sfp-mod-def0"; ++ }; ++ }; ++ ++ /* The MCP3021 is 100kHz clock only */ ++ mikrobus_adc: mcp3021@4c { ++ compatible = "microchip,mcp3021"; ++ reg = <0x4c>; ++ }; ++ ++ /* Also something at 0x64 */ ++ }; ++ ++ i2c@11100 { ++ /* ++ * Routed to SFP, mikrobus, and PCIe. ++ * SFP limits this to 100kHz, and requires ++ * an AT24C01A/02/04 with address pins tied ++ * low, which takes addresses 0x50 and 0x51. ++ * Mikrobus doesn't specify beyond an I2C ++ * bus being present. ++ * PCIe uses ARP to assign addresses, or ++ * 0x63-0x64. ++ */ ++ clock-frequency = <100000>; ++ pinctrl-0 = <&clearfog_i2c1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ }; ++ ++ mdio@72004 { ++ pinctrl-0 = <&mdio_pins>; ++ pinctrl-names = "default"; ++ ++ phy_dedicated: ethernet-phy@0 { ++ /* ++ * Annoyingly, the marvell phy driver ++ * configures the LED register, rather ++ * than preserving reset-loaded setting. ++ * We undo that rubbish here. ++ */ ++ marvell,reg-init = <3 16 0 0x101e>; ++ reg = <0>; ++ }; ++ }; ++ ++ pinctrl@18000 { ++ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { ++ marvell,pins = "mpp46"; ++ marvell,function = "ref"; ++ }; ++ clearfog_dsa0_pins: clearfog-dsa0-pins { ++ marvell,pins = "mpp23", "mpp41"; ++ marvell,function = "gpio"; ++ }; ++ clearfog_i2c1_pins: i2c1-pins { ++ /* SFP, PCIe, mSATA, mikrobus */ ++ marvell,pins = "mpp26", "mpp27"; ++ marvell,function = "i2c1"; ++ }; ++ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { ++ marvell,pins = "mpp20"; ++ marvell,function = "gpio"; ++ }; ++ clearfog_sdhci_pins: clearfog-sdhci-pins { ++ marvell,pins = "mpp21", "mpp28", ++ "mpp37", "mpp38", ++ "mpp39", "mpp40"; ++ marvell,function = "sd0"; ++ }; ++ clearfog_spi1_cs_pins: spi1-cs-pins { ++ marvell,pins = "mpp55"; ++ marvell,function = "spi1"; ++ }; ++ mikro_pins: mikro-pins { ++ /* int: mpp22 rst: mpp29 */ ++ marvell,pins = "mpp22", "mpp29"; ++ marvell,function = "gpio"; ++ }; ++ mikro_spi_pins: mikro-spi-pins { ++ marvell,pins = "mpp43"; ++ marvell,function = "spi1"; ++ }; ++ mikro_uart_pins: mikro-uart-pins { ++ marvell,pins = "mpp24", "mpp25"; ++ marvell,function = "ua1"; ++ }; ++ rear_button_pins: rear-button-pins { ++ marvell,pins = "mpp34"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ ++ sata@a8000 { ++ /* pinctrl? */ ++ status = "okay"; ++ }; ++ ++ sata@e0000 { ++ /* pinctrl? */ ++ status = "okay"; ++ }; ++ ++ sdhci@d8000 { ++ bus-width = <4>; ++ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; ++ no-1-8-v; ++ pinctrl-0 = <&clearfog_sdhci_pins ++ &clearfog_sdhci_cd_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ vmmc = <®_3p3v>; ++ wp-inverted; ++ }; ++ ++ serial@12100 { ++ /* mikrobus uart */ ++ pinctrl-0 = <&mikro_uart_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ }; ++ ++ spi@10680 { ++ /* ++ * We don't seem to have the W25Q32 on the ++ * A1 Rev 2.0 boards, so disable SPI. ++ * CS0: W25Q32 (doesn't appear to be present) ++ * CS1: ++ * CS2: mikrobus ++ */ ++ pinctrl-0 = <&spi1_pins ++ &clearfog_spi1_cs_pins ++ &mikro_spi_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ spi-flash@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "w25q32", "jedec,spi-nor"; ++ reg = <0>; /* Chip select 0 */ ++ spi-max-frequency = <3000000>; ++ status = "disabled"; ++ }; ++ }; ++ ++ usb@58000 { ++ /* CON3, nearest power. */ ++ status = "okay"; ++ }; ++ ++ usb3@f0000 { ++ /* CON2, nearest CPU, USB2 only. */ ++ status = "okay"; ++ }; ++ ++ usb3@f8000 { ++ /* CON7 */ ++ status = "okay"; ++ }; ++ }; ++ ++ pcie-controller { ++ status = "okay"; ++ /* ++ * The two PCIe units are accessible through ++ * the mini-PCIe connectors on the board. ++ */ ++ pcie@2,0 { ++ /* Port 1, Lane 0. CON3, nearest power. */ ++ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; ++ status = "okay"; ++ }; ++ pcie@3,0 { ++ /* Port 2, Lane 0. CON2, nearest CPU. */ ++ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ dsa@0 { ++ compatible = "marvell,dsa"; ++ dsa,ethernet = <ð1>; ++ dsa,mii-bus = <&mdio>; ++ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; ++ pinctrl-names = "default"; ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ switch@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4 0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan5"; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "cpu"; ++ }; ++ ++ port@6 { ++ /* 88E1512 external phy */ ++ reg = <6>; ++ label = "lan6"; ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ pinctrl-0 = <&rear_button_pins>; ++ pinctrl-names = "default"; ++ ++ button_0 { ++ /* The rear SW3 button */ ++ label = "Rear Button"; ++ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; ++ linux,can-disable; ++ linux,code = <BTN_0>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +@@ -0,0 +1,115 @@ ++/* ++ * Device Tree file for SolidRun Armada 38x Microsom ++ * ++ * Copyright (C) 2015 Russell King ++ * ++ * This board is in development; the contents of this file work with ++ * the A1 rev 2.0 of the board, which does not represent final ++ * production board. Things will change, don't expect this file to ++ * remain compatible info the future. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/gpio/gpio.h> ++ ++/ { ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x10000000>; /* 256 MB */ ++ }; ++ ++ soc { ++ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 ++ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 ++ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 ++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; ++ ++ internal-regs { ++ ethernet@70000 { ++ pinctrl-0 = <&ge0_rgmii_pins>; ++ pinctrl-names = "default"; ++ phy = <&phy_dedicated>; ++ phy-mode = "rgmii-id"; ++ status = "okay"; ++ }; ++ ++ mdio@72004 { ++ /* ++ * Add the phy clock here, so the phy can be ++ * accessed to read its IDs prior to binding ++ * with the driver. ++ */ ++ pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>; ++ pinctrl-names = "default"; ++ ++ phy_dedicated: ethernet-phy@0 { ++ /* ++ * Annoyingly, the marvell phy driver ++ * configures the LED register, rather ++ * than preserving reset-loaded setting. ++ * We undo that rubbish here. ++ */ ++ marvell,reg-init = <3 16 0 0x101e>; ++ reg = <0>; ++ }; ++ }; ++ ++ pinctrl@18000 { ++ microsom_phy_clk_pins: microsom-phy-clk-pins { ++ marvell,pins = "mpp45"; ++ marvell,function = "ref"; ++ }; ++ }; ++ ++ rtc@a3800 { ++ /* ++ * If the rtc doesn't work, run "date reset" ++ * twice in u-boot. ++ */ ++ status = "okay"; ++ }; ++ ++ serial@12000 { ++ pinctrl-0 = <&uart0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch b/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch new file mode 100644 index 0000000000..705d503c68 --- /dev/null +++ b/target/linux/mvebu/patches-4.4/054-ARM-dts-armada-38x-enable-buffer-manager-support-on-.patch @@ -0,0 +1,256 @@ +From c49e99c2b25a412623412a461bb751239208b9b3 Mon Sep 17 00:00:00 2001 +From: Marcin Wojtas <mw@semihalf.com> +Date: Mon, 14 Mar 2016 09:38:58 +0100 +Subject: [PATCH] ARM: dts: armada-38x: enable buffer manager support on Armada + 38x boards + +Since mvneta driver supports using hardware buffer management (BM), in +order to use it, board files have to be adjusted accordingly. This commit +enables BM on: +* A385-DB-AP - each port has its own pool for long and common pool for +short packets, +* A388-ClearFog - same as above, +* A388-DB - to each port unique 'short' and 'long' pools are mapped, +* A388-GP - same as above. + +Moreover appropriate entry is added to 'soc' node ranges, as well as "okay" +status for 'bm' and 'bm-bppi' (internal SRAM) nodes. + +[gregory.clement@free-electrons.com: add suppport for the ClearFog board] + +Signed-off-by: Marcin Wojtas <mw@semihalf.com> +Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> +Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + arch/arm/boot/dts/armada-385-db-ap.dts | 20 +++++++++++++++++++- + arch/arm/boot/dts/armada-388-clearfog.dts | 6 ++++++ + arch/arm/boot/dts/armada-388-db.dts | 17 ++++++++++++++++- + arch/arm/boot/dts/armada-388-gp.dts | 17 ++++++++++++++++- + arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 15 ++++++++++++++- + 5 files changed, 71 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/armada-385-db-ap.dts ++++ b/arch/arm/boot/dts/armada-385-db-ap.dts +@@ -61,7 +61,8 @@ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 +- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; ++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 ++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + spi1: spi@10680 { +@@ -138,12 +139,18 @@ + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <1>; ++ bm,pool-short = <3>; + }; + + ethernet@34000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <2>; ++ bm,pool-short = <3>; + }; + + ethernet@70000 { +@@ -157,6 +164,13 @@ + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <0>; ++ bm,pool-short = <3>; ++ }; ++ ++ bm@c8000 { ++ status = "okay"; + }; + + nfc: flash@d0000 { +@@ -178,6 +192,10 @@ + }; + }; + ++ bm-bppi { ++ status = "okay"; ++ }; ++ + pcie-controller { + status = "okay"; + +--- a/arch/arm/boot/dts/armada-388-clearfog.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -78,6 +78,9 @@ + internal-regs { + ethernet@30000 { + phy-mode = "sgmii"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <2>; ++ bm,pool-short = <1>; + status = "okay"; + + fixed-link { +@@ -88,6 +91,9 @@ + + ethernet@34000 { + phy-mode = "sgmii"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <3>; ++ bm,pool-short = <1>; + status = "okay"; + + fixed-link { +--- a/arch/arm/boot/dts/armada-388-db.dts ++++ b/arch/arm/boot/dts/armada-388-db.dts +@@ -66,7 +66,8 @@ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 +- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; ++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 ++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + spi@10600 { +@@ -99,6 +100,9 @@ + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <2>; ++ bm,pool-short = <3>; + }; + + usb@58000 { +@@ -109,6 +113,9 @@ + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <0>; ++ bm,pool-short = <1>; + }; + + mdio@72004 { +@@ -129,6 +136,10 @@ + status = "okay"; + }; + ++ bm@c8000 { ++ status = "okay"; ++ }; ++ + flash@d0000 { + status = "okay"; + num-cs = <1>; +@@ -169,6 +180,10 @@ + }; + }; + ++ bm-bppi { ++ status = "okay"; ++ }; ++ + pcie-controller { + status = "okay"; + /* +--- a/arch/arm/boot/dts/armada-388-gp.dts ++++ b/arch/arm/boot/dts/armada-388-gp.dts +@@ -60,7 +60,8 @@ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 +- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; ++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 ++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + spi@10600 { +@@ -133,6 +134,9 @@ + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <2>; ++ bm,pool-short = <3>; + }; + + /* CON4 */ +@@ -152,6 +156,9 @@ + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <0>; ++ bm,pool-short = <1>; + }; + + +@@ -186,6 +193,10 @@ + }; + }; + ++ bm@c8000 { ++ status = "okay"; ++ }; ++ + sata@e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata2_pins>, <&sata3_pins>; +@@ -240,6 +251,10 @@ + }; + }; + ++ bm-bppi { ++ status = "okay"; ++ }; ++ + pcie-controller { + status = "okay"; + /* +--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi ++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +@@ -58,7 +58,8 @@ + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 +- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; ++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 ++ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + + internal-regs { + ethernet@70000 { +@@ -66,6 +67,9 @@ + pinctrl-names = "default"; + phy = <&phy_dedicated>; + phy-mode = "rgmii-id"; ++ buffer-manager = <&bm>; ++ bm,pool-long = <0>; ++ bm,pool-short = <1>; + status = "okay"; + }; + +@@ -110,6 +114,15 @@ + pinctrl-names = "default"; + status = "okay"; + }; ++ ++ bm@c8000 { ++ status = "okay"; ++ }; + }; ++ ++ bm-bppi { ++ status = "okay"; ++ }; ++ + }; + }; diff --git a/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch b/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch new file mode 100644 index 0000000000..823d514dfa --- /dev/null +++ b/target/linux/mvebu/patches-4.4/055-ARM-dts-armada-388-clearfog-remove-duplicate-mdio-en.patch @@ -0,0 +1,41 @@ +From d261861ab52623e34a25fe6ae76714456edda033 Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Sun, 10 Jul 2016 16:27:38 +0100 +Subject: [PATCH] ARM: dts: armada-388-clearfog: remove duplicate mdio entry + +The clearfog DTS should not be defining the on-board phy, this device +is located on the microsom. Remove the duplicated definition. + +Reported-by: Jon Nettleton <jon@solid-run.com> +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +Reviewed-by: Andrew Lunn <andrew@lunn.ch> +Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> +--- + arch/arm/boot/dts/armada-388-clearfog.dts | 16 ---------------- + 1 file changed, 16 deletions(-) + +--- a/arch/arm/boot/dts/armada-388-clearfog.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -239,22 +239,6 @@ + status = "okay"; + }; + +- mdio@72004 { +- pinctrl-0 = <&mdio_pins>; +- pinctrl-names = "default"; +- +- phy_dedicated: ethernet-phy@0 { +- /* +- * Annoyingly, the marvell phy driver +- * configures the LED register, rather +- * than preserving reset-loaded setting. +- * We undo that rubbish here. +- */ +- marvell,reg-init = <3 16 0 0x101e>; +- reg = <0>; +- }; +- }; +- + pinctrl@18000 { + clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { + marvell,pins = "mpp46"; diff --git a/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch index a06b51f2ab..d2aaeef4aa 100644 --- a/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch +++ b/target/linux/mvebu/patches-4.4/208-ARM-mvebu-385-ap-Add-partitions.patch @@ -10,7 +10,7 @@ Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -170,6 +170,21 @@ +@@ -184,6 +184,21 @@ marvell,nand-keep-config; marvell,nand-enable-arbiter; nand-on-flash-bbt; diff --git a/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch b/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch deleted file mode 100644 index 80a09465bd..0000000000 --- a/target/linux/mvebu/patches-4.4/209-solidrun_clearfog.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -749,6 +749,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-linksys-caiman.dtb \ - armada-385-linksys-cobra.dtb \ - armada-385-linksys-shelby.dtb \ -+ armada-388-clearfog.dtb \ - armada-388-db.dtb \ - armada-388-gp.dtb \ - armada-388-rd.dtb |