diff options
Diffstat (limited to 'target/linux/mvebu')
| -rw-r--r-- | target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch new file mode 100644 index 0000000000..a9a6634c23 --- /dev/null +++ b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch @@ -0,0 +1,98 @@ +From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jonas.gorski@gmail.com> +Date: Thu, 29 Sep 2016 11:44:39 +0200 +Subject: [PATCH] sfp: retry phy probe if unsuccessful + +Some phys seem to take longer than 50 ms to come out of reset, so retry +until we find a phy. + +Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> +--- + drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++------------- + 1 file changed, 25 insertions(+), 13 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -488,7 +488,7 @@ static void sfp_sm_phy_detach(struct sfp + sfp->mod_phy = NULL; + } + +-static void sfp_sm_probe_phy(struct sfp *sfp) ++static int sfp_sm_probe_phy(struct sfp *sfp) + { + struct phy_device *phy; + int err; +@@ -497,12 +497,12 @@ static void sfp_sm_probe_phy(struct sfp + + phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); + if (IS_ERR(phy)) { ++ if (PTR_ERR(phy) == -ENODEV) { ++ dev_dbg(sfp->dev, "no PHY detected\n"); ++ return -EAGAIN; ++ } + dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); +- return; +- } +- if (!phy) { +- dev_info(sfp->dev, "no PHY detected\n"); +- return; ++ return PTR_ERR(phy); + } + + err = sfp_add_phy(sfp->sfp_bus, phy); +@@ -510,11 +510,13 @@ static void sfp_sm_probe_phy(struct sfp + phy_device_remove(phy); + phy_device_free(phy); + dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); +- return; ++ return err; + } + + sfp->mod_phy = phy; + phy_start(phy); ++ ++ return 0; + } + + static void sfp_sm_link_up(struct sfp *sfp) +@@ -560,14 +562,9 @@ static void sfp_sm_fault(struct sfp *sfp + + static void sfp_sm_mod_init(struct sfp *sfp) + { +- sfp_module_tx_enable(sfp); ++ int ret = 0; + +- /* Wait t_init before indicating that the link is up, provided the +- * current state indicates no TX_FAULT. If TX_FAULT clears before +- * this time, that's fine too. +- */ +- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); +- sfp->sm_retries = 5; ++ sfp_module_tx_enable(sfp); + + /* Setting the serdes link mode is guesswork: there's no + * field in the EEPROM which indicates what mode should +@@ -581,7 +578,22 @@ static void sfp_sm_mod_init(struct sfp * + if (sfp->id.base.e1000_base_t || + sfp->id.base.e100_base_lx || + sfp->id.base.e100_base_fx) +- sfp_sm_probe_phy(sfp); ++ ret = sfp_sm_probe_phy(sfp); ++ ++ if (!ret) { ++ /* Wait t_init before indicating that the link is up, provided ++ * the current state indicates no TX_FAULT. If TX_FAULT clears ++ * this time, that's fine too. ++ */ ++ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); ++ sfp->sm_retries = 5; ++ return; ++ } ++ ++ if (ret == -EAGAIN) ++ sfp_sm_set_timer(sfp, T_PROBE_RETRY); ++ else ++ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); + } + + static int sfp_sm_mod_probe(struct sfp *sfp) |