aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch')
-rw-r--r--target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch540
1 files changed, 0 insertions, 540 deletions
diff --git a/target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch b/target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch
deleted file mode 100644
index c075c4b02a..0000000000
--- a/target/linux/mvebu/patches-4.9/471-add-ClearFog-Base-device-tree-files.patch
+++ /dev/null
@@ -1,540 +0,0 @@
-From b4ac5820bdc98ee24a2f73b8bd7fdf7f82db3a46 Mon Sep 17 00:00:00 2001
-From: Marko Ratkaj <marko.ratkaj@sartura.hr>
-Date: Fri, 7 Apr 2017 11:02:30 +0200
-Subject: [PATCH 2/2] add ClearFog Base device tree files
-
-Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 161 ++++++++++++
- arch/arm/boot/dts/armada-388-clearfog.dtsi | 282 +++++++++++++++++++++
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++
- 4 files changed, 506 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-388-clearfog-base.dts
- create mode 100644 arch/arm/boot/dts/armada-388-clearfog.dtsi
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -925,6 +925,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-linksys-shelby.dtb \
- armada-388-clearfog.dtb \
- armada-388-clearfog-pro.dtb \
-+ armada-388-clearfog-base.dtb \
- armada-388-db.dtb \
- armada-388-gp.dtb \
- armada-388-rd.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -0,0 +1,161 @@
-+/*
-+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
-+
-+/ {
-+ model = "SolidRun Clearfog Base A1";
-+ compatible = "solidrun,clearfog-base-a1",
-+ "solidrun,clearfog-a1", "marvell,armada388",
-+ "marvell,armada385", "marvell,armada380";
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-0 = <&rear_button_pins>;
-+ pinctrl-names = "default";
-+
-+ button_0 {
-+ /* The rear SW3 button */
-+ label = "Rear Button";
-+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-+ linux,can-disable;
-+ linux,code = <BTN_0>;
-+ };
-+ };
-+};
-+
-+&eth1 {
-+ phy = <&phy1>;
-+};
-+
-+&gpio0 {
-+ phy1_reset {
-+ gpio-hog;
-+ gpios = <19 GPIO_ACTIVE_LOW>;
-+ output-low;
-+ line-name = "phy1-reset";
-+ };
-+};
-+
-+&mdio {
-+ pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
-+ phy1: ethernet-phy@1 {
-+ /*
-+ * Annoyingly, the marvell phy driver configures the LED
-+ * register, rather than preserving reset-loaded setting.
-+ * We undo that rubbish here.
-+ */
-+ marvell,reg-init = <3 16 0 0x101e>;
-+ reg = <1>;
-+ };
-+};
-+
-+&pinctrl {
-+ /* phy1 reset */
-+ clearfog_phy_pins: clearfog-phy-pins {
-+ marvell,pins = "mpp19";
-+ marvell,function = "gpio";
-+ };
-+ rear_button_pins: rear-button-pins {
-+ marvell,pins = "mpp44";
-+ marvell,function = "gpio";
-+ };
-+};
-+
-+/*
-+MPP
-+18: pu gpio pca9655 int
-+19: gpio phy reset
-+20: pu gpio sd0 detect
-+21: sd0:cmd
-+22: pd gpio mikro int
-+23:
-+
-+24: ua1:rxd mikro rx
-+25: ua1:txd mikro tx
-+26: pu i2c1:sck
-+27: pu i2c1:sda
-+28: sd0:clk
-+29: pd gpio mikro rst
-+30:
-+31:
-+
-+32:
-+33:
-+34:
-+35:
-+36:
-+37: sd0:d3
-+38: sd0:d0
-+39: sd0:d1
-+
-+40: sd0:d2
-+41:
-+42:
-+43: spi1:cs2 mikro cs
-+44: gpio rear button sw3
-+45: ref:clk_out0 phy#0 clock
-+46: ref:clk_out1 phy#1 clock
-+47:
-+
-+48: gpio J18 spare gpio
-+49: gpio U10 I2C_IRQ(GNSS)
-+50: gpio board id?
-+51:
-+52:
-+53:
-+54: gpio mikro pwm
-+55:
-+
-+56: pu spi1:mosi mikro mosi
-+57: pd spi1:sck mikro sck
-+58: spi1:miso mikro miso
-+59:
-+*/
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
-@@ -0,0 +1,282 @@
-+/*
-+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "armada-388.dtsi"
-+#include "armada-38x-solidrun-microsom.dtsi"
-+
-+/ {
-+ aliases {
-+ /* So that mvebu u-boot can update the MAC addresses */
-+ ethernet1 = &eth0;
-+ ethernet2 = &eth1;
-+ ethernet3 = &eth2;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ soc {
-+ internal-regs {
-+ sata@a8000 {
-+ /* pinctrl? */
-+ status = "okay";
-+ };
-+
-+ sata@e0000 {
-+ /* pinctrl? */
-+ status = "okay";
-+ };
-+
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-+ no-1-8-v;
-+ pinctrl-0 = <&microsom_sdhci_pins
-+ &clearfog_sdhci_cd_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ vmmc = <&reg_3p3v>;
-+ wp-inverted;
-+ };
-+
-+ usb@58000 {
-+ /* CON3, nearest power. */
-+ status = "okay";
-+ };
-+
-+ usb3@f8000 {
-+ /* CON7 */
-+ status = "okay";
-+ };
-+ };
-+
-+ pcie-controller {
-+ status = "okay";
-+ /*
-+ * The two PCIe units are accessible through
-+ * the mini-PCIe connectors on the board.
-+ */
-+ pcie@2,0 {
-+ /* Port 1, Lane 0. CON3, nearest power. */
-+ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+ };
-+ };
-+ };
-+
-+ sfp: sfp {
-+ compatible = "sff,sfp";
-+ i2c-bus = <&i2c1>;
-+ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-+ moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-+ sfp,ethernet = <&eth2>;
-+ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-+ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&eth1 {
-+ /* ethernet@30000 */
-+ bm,pool-long = <2>;
-+ bm,pool-short = <1>;
-+ buffer-manager = <&bm>;
-+ phy-mode = "sgmii";
-+ status = "okay";
-+};
-+
-+&eth2 {
-+ /* ethernet@34000 */
-+ bm,pool-long = <3>;
-+ bm,pool-short = <1>;
-+ buffer-manager = <&bm>;
-+ managed = "in-band-status";
-+ phy-mode = "sgmii";
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ clock-frequency = <400000>;
-+ pinctrl-0 = <&i2c0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ /*
-+ * PCA9655 GPIO expander, up to 1MHz clock.
-+ * 0-CON3 CLKREQ#
-+ * 1-CON3 PERST#
-+ * 2-
-+ * 3-CON3 W_DISABLE
-+ * 4-
-+ * 5-USB3 overcurrent
-+ * 6-USB3 power
-+ * 7-
-+ * 8-JP4 P1
-+ * 9-JP4 P4
-+ * 10-JP4 P5
-+ * 11-m.2 DEVSLP
-+ * 12-SFP_LOS
-+ * 13-SFP_TX_FAULT
-+ * 14-SFP_TX_DISABLE
-+ * 15-SFP_MOD_DEF0
-+ */
-+ expander0: gpio-expander@20 {
-+ /*
-+ * This is how it should be:
-+ * compatible = "onnn,pca9655", "nxp,pca9555";
-+ * but you can't do this because of the way I2C works.
-+ */
-+ compatible = "nxp,pca9555";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ reg = <0x20>;
-+
-+ pcie1_0_clkreq {
-+ gpio-hog;
-+ gpios = <0 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "pcie1.0-clkreq";
-+ };
-+ pcie1_0_w_disable {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_LOW>;
-+ output-low;
-+ line-name = "pcie1.0-w-disable";
-+ };
-+ usb3_ilimit {
-+ gpio-hog;
-+ gpios = <5 GPIO_ACTIVE_LOW>;
-+ input;
-+ line-name = "usb3-current-limit";
-+ };
-+ usb3_power {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "usb3-power";
-+ };
-+ m2_devslp {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "m.2 devslp";
-+ };
-+ };
-+
-+ /* The MCP3021 supports standard and fast modes */
-+ mikrobus_adc: mcp3021@4c {
-+ compatible = "microchip,mcp3021";
-+ reg = <0x4c>;
-+ };
-+};
-+
-+&i2c1 {
-+ /*
-+ * Routed to SFP, mikrobus, and PCIe.
-+ * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
-+ * address pins tied low, which takes addresses 0x50 and 0x51.
-+ * Mikrobus doesn't specify beyond an I2C bus being present.
-+ * PCIe uses ARP to assign addresses, or 0x63-0x64.
-+ */
-+ clock-frequency = <100000>;
-+ pinctrl-0 = <&clearfog_i2c1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ clearfog_i2c1_pins: i2c1-pins {
-+ /* SFP, PCIe, mSATA, mikrobus */
-+ marvell,pins = "mpp26", "mpp27";
-+ marvell,function = "i2c1";
-+ };
-+ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
-+ marvell,pins = "mpp20";
-+ marvell,function = "gpio";
-+ };
-+ mikro_pins: mikro-pins {
-+ /* int: mpp22 rst: mpp29 */
-+ marvell,pins = "mpp22", "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ mikro_spi_pins: mikro-spi-pins {
-+ marvell,pins = "mpp43";
-+ marvell,function = "spi1";
-+ };
-+ mikro_uart_pins: mikro-uart-pins {
-+ marvell,pins = "mpp24", "mpp25";
-+ marvell,function = "ua1";
-+ };
-+};
-+
-+&spi1 {
-+ /*
-+ * Add SPI CS pins for clearfog:
-+ * CS0: W25Q32 (not populated on uSOM)
-+ * CS1: PIC microcontroller (Pro models)
-+ * CS2: mikrobus
-+ */
-+ pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ /* mikrobus uart */
-+ pinctrl-0 = <&mikro_uart_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+ soc {
-+ internal-regs {
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ pinctrl-0 = <&microsom_sdhci_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ wp-inverted;
-+ };
-+ };
-+ };
-+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 08:38:30 +0000