diff options
Diffstat (limited to 'target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch')
-rw-r--r-- | target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch | 73 |
1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch b/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch deleted file mode 100644 index 885e3d7c5e..0000000000 --- a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 1a990fefb641398fb580a0ea0be99b0ff27cbb9b Mon Sep 17 00:00:00 2001 -From: Baruch Siach <baruch@tkos.co.il> -Date: Thu, 21 Jun 2018 20:40:23 +0300 -Subject: [PATCH] rtc: armada38x: reset after rtc power loss - -When the RTC block looses power it needs a reset sequence to make it -usable again. Otherwise, writes to the time register have no effect. - -This reset sequence combines information from the mvebu_rtc driver in -the Marvell provided U-Boot, and the SolidRun provided U-Boot repo. - -Tested on the Armada 388 based SolidRun Clearfog Base. - -Signed-off-by: Baruch Siach <baruch@tkos.co.il> -Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> -Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> ---- - drivers/rtc/rtc-armada38x.c | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/rtc/rtc-armada38x.c -+++ b/drivers/rtc/rtc-armada38x.c -@@ -30,6 +30,8 @@ - #define RTC_IRQ_FREQ_1HZ BIT(2) - #define RTC_CCR 0x18 - #define RTC_CCR_MODE BIT(15) -+#define RTC_CONF_TEST 0x1C -+#define RTC_NOMINAL_TIMING BIT(13) - - #define RTC_TIME 0xC - #define RTC_ALARM1 0x10 -@@ -75,6 +77,7 @@ struct armada38x_rtc { - void __iomem *regs_soc; - spinlock_t lock; - int irq; -+ bool initialized; - struct value_to_freq *val_to_freq; - struct armada38x_rtc_data *data; - }; -@@ -226,6 +229,23 @@ static int armada38x_rtc_read_time(struc - return 0; - } - -+static void armada38x_rtc_reset(struct armada38x_rtc *rtc) -+{ -+ u32 reg; -+ -+ reg = rtc->data->read_rtc_reg(rtc, RTC_CONF_TEST); -+ /* If bits [7:0] are non-zero, assume RTC was uninitialized */ -+ if (reg & 0xff) { -+ rtc_delayed_write(0, rtc, RTC_CONF_TEST); -+ msleep(500); /* Oscillator startup time */ -+ rtc_delayed_write(0, rtc, RTC_TIME); -+ rtc_delayed_write(SOC_RTC_ALARM1 | SOC_RTC_ALARM2, rtc, -+ RTC_STATUS); -+ rtc_delayed_write(RTC_NOMINAL_TIMING, rtc, RTC_CCR); -+ } -+ rtc->initialized = true; -+} -+ - static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) - { - struct armada38x_rtc *rtc = dev_get_drvdata(dev); -@@ -237,6 +257,9 @@ static int armada38x_rtc_set_time(struct - if (ret) - goto out; - -+ if (!rtc->initialized) -+ armada38x_rtc_reset(rtc); -+ - spin_lock_irqsave(&rtc->lock, flags); - rtc_delayed_write(time, rtc, RTC_TIME); - spin_unlock_irqrestore(&rtc->lock, flags); |