aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch')
-rw-r--r--target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch280
1 files changed, 0 insertions, 280 deletions
diff --git a/target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch b/target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch
deleted file mode 100644
index d005637576..0000000000
--- a/target/linux/mpc83xx/patches-3.14/203-mtd-add-rbppc_nand-driver.patch
+++ /dev/null
@@ -1,280 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -405,6 +405,13 @@ config MTD_NAND_PLATFORM
- devices. You will need to provide platform-specific functions
- via platform_data.
-
-+config MTD_NAND_RB_PPC
-+ tristate "MikroTik RB333/600 NAND support"
-+ depends on RB_PPC
-+ help
-+ This option enables support for the NAND device on MikroTik
-+ RouterBOARD 333/600 series boards.
-+
- config MTD_NAND_ORION
- tristate "NAND Flash support for Marvell Orion SoC"
- depends on PLAT_ORION
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB_PPC) += rbppc_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
---- /dev/null
-+++ b/drivers/mtd/nand/rbppc_nand.c
-@@ -0,0 +1,251 @@
-+/*
-+ * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
-+ * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
-+ * Copyright (C) Mikrotik 2007
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/of_address.h>
-+#include <asm/io.h>
-+
-+#define DRV_NAME "rbppc_nand"
-+#define DRV_VERSION "0.0.2"
-+
-+static struct mtd_info rmtd;
-+static struct nand_chip rnand;
-+
-+struct rbppc_nand_info {
-+ void *gpi;
-+ void *gpo;
-+ void *localbus;
-+
-+ unsigned gpio_rdy;
-+ unsigned gpio_nce;
-+ unsigned gpio_cle;
-+ unsigned gpio_ale;
-+ unsigned gpio_ctrls;
-+};
-+
-+/* We must use the OOB layout from yaffs 1 if we want this to be recognized
-+ * properly. Borrowed from the OpenWRT patches for the RB532.
-+ *
-+ * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
-+ * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
-+ */
-+static struct nand_ecclayout rbppc_nand_oob_16 = {
-+ .eccbytes = 6,
-+ .eccpos = { 8, 9, 10, 13, 14, 15 },
-+ .oobavail = 9,
-+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-+};
-+
-+static struct mtd_partition rbppc_nand_partition_info[] = {
-+ {
-+ name: "kernel",
-+ offset: 0,
-+ size: 4 * 1024 * 1024,
-+ },
-+ {
-+ name: "rootfs",
-+ offset: MTDPART_OFS_NXTBLK,
-+ size: MTDPART_SIZ_FULL,
-+ },
-+};
-+
-+static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ return in_be32(priv->gpi) & priv->gpio_rdy;
-+}
-+
-+static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
-+ struct nand_chip *chip = mtd->priv;
-+ struct rbppc_nand_info *priv = chip->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ unsigned val = in_be32(priv->gpo);
-+ if (!(val & priv->gpio_nce)) {
-+ /* make sure Local Bus has done NAND operations */
-+ readb(priv->localbus);
-+ }
-+
-+ if (ctrl & NAND_CLE) {
-+ val |= priv->gpio_cle;
-+ } else {
-+ val &= ~priv->gpio_cle;
-+ }
-+ if (ctrl & NAND_ALE) {
-+ val |= priv->gpio_ale;
-+ } else {
-+ val &= ~priv->gpio_ale;
-+ }
-+ if (!(ctrl & NAND_NCE)) {
-+ val |= priv->gpio_nce;
-+ } else {
-+ val &= ~priv->gpio_nce;
-+ }
-+ out_be32(priv->gpo, val);
-+
-+ /* make sure GPIO output has changed */
-+ val ^= in_be32(priv->gpo);
-+ if (val & priv->gpio_ctrls) {
-+ printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
-+ }
-+ }
-+
-+ if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
-+}
-+
-+static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ memcpy(buf, chip->IO_ADDR_R, len);
-+}
-+
-+static unsigned init_ok = 0;
-+
-+static int rbppc_nand_probe(struct platform_device *pdev)
-+{
-+ struct device_node *gpio;
-+ struct device_node *nnand;
-+ struct resource res;
-+ struct rbppc_nand_info *info;
-+ void *baddr;
-+ const unsigned *rdy, *nce, *cle, *ale;
-+
-+ printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
-+
-+ info = kmalloc(sizeof(*info), GFP_KERNEL);
-+
-+ rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
-+ nce = of_get_property(pdev->dev.of_node, "nce", NULL);
-+ cle = of_get_property(pdev->dev.of_node, "cle", NULL);
-+ ale = of_get_property(pdev->dev.of_node, "ale", NULL);
-+
-+ if (!rdy || !nce || !cle || !ale) {
-+ printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
-+ goto err;
-+ }
-+ if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
-+ printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
-+ goto err;
-+ }
-+
-+ gpio = of_find_node_by_phandle(rdy[0]);
-+ if (!gpio) {
-+ printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
-+ goto err;
-+ }
-+ if (of_address_to_resource(gpio, 0, &res)) {
-+ printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
-+ goto err;
-+ }
-+ info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (!of_address_to_resource(gpio, 1, &res)) {
-+ info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
-+ } else {
-+ info->gpi = info->gpo;
-+ }
-+ of_node_put(gpio);
-+
-+ info->gpio_rdy = 1 << (31 - rdy[1]);
-+ info->gpio_nce = 1 << (31 - nce[1]);
-+ info->gpio_cle = 1 << (31 - cle[1]);
-+ info->gpio_ale = 1 << (31 - ale[1]);
-+ info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
-+
-+ nnand = of_find_node_by_name(NULL, "nnand");
-+ if (!nnand) {
-+ printk("rbppc_nand_probe: No nNAND found\n");
-+ goto err;
-+ }
-+ if (of_address_to_resource(nnand, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property in nNAND found\n");
-+ goto err;
-+ }
-+ of_node_put(nnand);
-+ info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
-+ printk("rbppc_nand_probe: No reg property found\n");
-+ goto err;
-+ }
-+ baddr = ioremap_nocache(res.start, res.end - res.start + 1);
-+
-+ memset(&rnand, 0, sizeof(rnand));
-+ rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
-+ rnand.dev_ready = rbppc_nand_dev_ready;
-+ rnand.read_buf = rbppc_nand_read_buf;
-+ rnand.IO_ADDR_W = baddr;
-+ rnand.IO_ADDR_R = baddr;
-+ rnand.priv = info;
-+
-+ memset(&rmtd, 0, sizeof(rmtd));
-+ rnand.ecc.mode = NAND_ECC_SOFT;
-+ rnand.ecc.layout = &rbppc_nand_oob_16;
-+ rnand.chip_delay = 25;
-+ rmtd.priv = &rnand;
-+ rmtd.owner = THIS_MODULE;
-+
-+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
-+ printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
-+ return -ENXIO;
-+ }
-+
-+ mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
-+ init_ok = 1;
-+ return 0;
-+
-+err:
-+ kfree(info);
-+ return -1;
-+}
-+
-+static struct of_device_id rbppc_nand_ids[] = {
-+ { .name = "nand", },
-+ { },
-+};
-+
-+static struct platform_driver rbppc_nand_driver = {
-+ .probe = rbppc_nand_probe,
-+ .driver = {
-+ .name = "rbppc-nand",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rbppc_nand_ids,
-+ },
-+};
-+
-+static int __init rbppc_nand_init(void)
-+{
-+ return platform_driver_register(&rbppc_nand_driver);
-+}
-+
-+static void __exit rbppc_nand_exit(void)
-+{
-+ platform_driver_unregister(&rbppc_nand_driver);
-+}
-+
-+MODULE_AUTHOR("Mikrotikls SIA");
-+MODULE_AUTHOR("Noah Fontes");
-+MODULE_AUTHOR("Michael Guntsche");
-+MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
-+
-+module_init(rbppc_nand_init);
-+module_exit(rbppc_nand_exit);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 12:25:24 +0000