aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch')
-rw-r--r--target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch304
1 files changed, 0 insertions, 304 deletions
diff --git a/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch b/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch
deleted file mode 100644
index c247db474a..0000000000
--- a/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-From 6f7a129e59721f6d97a0f06f7078d06f19ade69e Mon Sep 17 00:00:00 2001
-From: Yutang Jiang <yutang.jiang@nxp.com>
-Date: Thu, 21 Jul 2016 19:37:42 +0800
-Subject: [PATCH 70/70] Revert "arm64: use fixmap region for permanent FDT
- mapping"
-
-Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
----
- Documentation/arm64/booting.txt | 10 +++----
- arch/arm64/include/asm/boot.h | 14 ----------
- arch/arm64/include/asm/fixmap.h | 15 -----------
- arch/arm64/include/asm/mmu.h | 1 -
- arch/arm64/kernel/head.S | 39 ++++++++++++++++++++++++++-
- arch/arm64/kernel/setup.c | 29 +++++++++++++-------
- arch/arm64/mm/init.c | 1 +
- arch/arm64/mm/mmu.c | 57 ---------------------------------------
- 8 files changed, 62 insertions(+), 104 deletions(-)
- delete mode 100644 arch/arm64/include/asm/boot.h
-
---- a/Documentation/arm64/booting.txt
-+++ b/Documentation/arm64/booting.txt
-@@ -45,13 +45,11 @@ sees fit.)
-
- Requirement: MANDATORY
-
--The device tree blob (dtb) must be placed on an 8-byte boundary and must
--not exceed 2 megabytes in size. Since the dtb will be mapped cacheable
--using blocks of up to 2 megabytes in size, it must not be placed within
--any 2M region which must be mapped with any specific attributes.
-+The device tree blob (dtb) must be placed on an 8-byte boundary within
-+the first 512 megabytes from the start of the kernel image and must not
-+cross a 2-megabyte boundary. This is to allow the kernel to map the
-+blob using a single section mapping in the initial page tables.
-
--NOTE: versions prior to v4.2 also require that the DTB be placed within
--the 512 MB region starting at text_offset bytes below the kernel Image.
-
- 3. Decompress the kernel image
- ------------------------------
---- a/arch/arm64/include/asm/boot.h
-+++ /dev/null
-@@ -1,14 +0,0 @@
--
--#ifndef __ASM_BOOT_H
--#define __ASM_BOOT_H
--
--#include <asm/sizes.h>
--
--/*
-- * arm64 requires the DTB to be 8 byte aligned and
-- * not exceed 2MB in size.
-- */
--#define MIN_FDT_ALIGN 8
--#define MAX_FDT_SIZE SZ_2M
--
--#endif
---- a/arch/arm64/include/asm/fixmap.h
-+++ b/arch/arm64/include/asm/fixmap.h
-@@ -18,7 +18,6 @@
- #ifndef __ASSEMBLY__
- #include <linux/kernel.h>
- #include <linux/sizes.h>
--#include <asm/boot.h>
- #include <asm/page.h>
-
- /*
-@@ -34,20 +33,6 @@
- */
- enum fixed_addresses {
- FIX_HOLE,
--
-- /*
-- * Reserve a virtual window for the FDT that is 2 MB larger than the
-- * maximum supported size, and put it at the top of the fixmap region.
-- * The additional space ensures that any FDT that does not exceed
-- * MAX_FDT_SIZE can be mapped regardless of whether it crosses any
-- * 2 MB alignment boundaries.
-- *
-- * Keep this at the top so it remains 2 MB aligned.
-- */
--#define FIX_FDT_SIZE (MAX_FDT_SIZE + SZ_2M)
-- FIX_FDT_END,
-- FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
--
- FIX_EARLYCON_MEM_BASE,
- FIX_TEXT_POKE0,
- __end_of_permanent_fixed_addresses,
---- a/arch/arm64/include/asm/mmu.h
-+++ b/arch/arm64/include/asm/mmu.h
-@@ -34,6 +34,5 @@ extern void init_mem_pgprot(void);
- extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
- unsigned long virt, phys_addr_t size,
- pgprot_t prot);
--extern void *fixmap_remap_fdt(phys_addr_t dt_phys);
-
- #endif
---- a/arch/arm64/kernel/head.S
-+++ b/arch/arm64/kernel/head.S
-@@ -212,6 +212,8 @@ ENTRY(stext)
- bl el2_setup // Drop to EL1, w20=cpu_boot_mode
- adrp x24, __PHYS_OFFSET
- bl set_cpu_boot_mode_flag
-+
-+ bl __vet_fdt
- bl __create_page_tables // x25=TTBR0, x26=TTBR1
- /*
- * The following calls CPU setup code, see arch/arm64/mm/proc.S for
-@@ -243,6 +245,24 @@ preserve_boot_args:
- ENDPROC(preserve_boot_args)
-
- /*
-+ * Determine validity of the x21 FDT pointer.
-+ * The dtb must be 8-byte aligned and live in the first 512M of memory.
-+ */
-+__vet_fdt:
-+ tst x21, #0x7
-+ b.ne 1f
-+ cmp x21, x24
-+ b.lt 1f
-+ mov x0, #(1 << 29)
-+ add x0, x0, x24
-+ cmp x21, x0
-+ b.ge 1f
-+ ret
-+1:
-+ mov x21, #0
-+ ret
-+ENDPROC(__vet_fdt)
-+/*
- * Macro to create a table entry to the next page.
- *
- * tbl: page table address
-@@ -306,7 +326,8 @@ ENDPROC(preserve_boot_args)
- * required to get the kernel running. The following sections are required:
- * - identity mapping to enable the MMU (low address, TTBR0)
- * - first few MB of the kernel linear mapping to jump to once the MMU has
-- * been enabled
-+ * been enabled, including the FDT blob (TTBR1)
-+ * - pgd entry for fixed mappings (TTBR1)
- */
- __create_page_tables:
- adrp x25, idmap_pg_dir
-@@ -396,6 +417,22 @@ __create_page_tables:
- create_block_map x0, x7, x3, x5, x6
-
- /*
-+ * Map the FDT blob (maximum 2MB; must be within 512MB of
-+ * PHYS_OFFSET).
-+ */
-+ mov x3, x21 // FDT phys address
-+ and x3, x3, #~((1 << 21) - 1) // 2MB aligned
-+ mov x6, #PAGE_OFFSET
-+ sub x5, x3, x24 // subtract PHYS_OFFSET
-+ tst x5, #~((1 << 29) - 1) // within 512MB?
-+ csel x21, xzr, x21, ne // zero the FDT pointer
-+ b.ne 1f
-+ add x5, x5, x6 // __va(FDT blob)
-+ add x6, x5, #1 << 21 // 2MB for the FDT blob
-+ sub x6, x6, #1 // inclusive range
-+ create_block_map x0, x7, x3, x5, x6
-+1:
-+ /*
- * Since the page tables have been populated with non-cacheable
- * accesses (MMU disabled), invalidate the idmap and swapper page
- * tables again to remove any speculatively loaded cache lines.
---- a/arch/arm64/kernel/setup.c
-+++ b/arch/arm64/kernel/setup.c
-@@ -87,6 +87,18 @@ static struct resource mem_res[] = {
- #define kernel_code mem_res[0]
- #define kernel_data mem_res[1]
-
-+void __init early_print(const char *str, ...)
-+{
-+ char buf[256];
-+ va_list ap;
-+
-+ va_start(ap, str);
-+ vsnprintf(buf, sizeof(buf), str, ap);
-+ va_end(ap);
-+
-+ printk("%s", buf);
-+}
-+
- /*
- * The recorded values of x0 .. x3 upon kernel entry.
- */
-@@ -180,14 +192,12 @@ static void __init smp_build_mpidr_hash(
-
- static void __init setup_machine_fdt(phys_addr_t dt_phys)
- {
-- void *dt_virt = fixmap_remap_fdt(dt_phys);
--
-- if (!dt_virt || !early_init_dt_scan(dt_virt)) {
-- pr_crit("\n"
-- "Error: invalid device tree blob at physical address %pa (virtual address 0x%p)\n"
-- "The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"
-- "\nPlease check your bootloader.",
-- &dt_phys, dt_virt);
-+ if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) {
-+ early_print("\n"
-+ "Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
-+ "The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
-+ "\nPlease check your bootloader.\n",
-+ dt_phys, phys_to_virt(dt_phys));
-
- while (true)
- cpu_relax();
-@@ -294,6 +304,7 @@ void __init setup_arch(char **cmdline_p)
- pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
-
- sprintf(init_utsname()->machine, ELF_PLATFORM);
-+ setup_machine_fdt(__fdt_pointer);
- init_mm.start_code = (unsigned long) _text;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
-@@ -304,8 +315,6 @@ void __init setup_arch(char **cmdline_p)
- early_fixmap_init();
- early_ioremap_init();
-
-- setup_machine_fdt(__fdt_pointer);
--
- parse_early_param();
-
- /*
---- a/arch/arm64/mm/init.c
-+++ b/arch/arm64/mm/init.c
-@@ -171,6 +171,7 @@ void __init arm64_memblock_init(void)
- memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
- #endif
-
-+ early_init_fdt_reserve_self();
- early_init_fdt_scan_reserved_mem();
-
- /* 4GB maximum for 32-bit only capable devices */
---- a/arch/arm64/mm/mmu.c
-+++ b/arch/arm64/mm/mmu.c
-@@ -21,7 +21,6 @@
- #include <linux/kernel.h>
- #include <linux/errno.h>
- #include <linux/init.h>
--#include <linux/libfdt.h>
- #include <linux/mman.h>
- #include <linux/nodemask.h>
- #include <linux/memblock.h>
-@@ -641,59 +640,3 @@ void __set_fixmap(enum fixed_addresses i
- flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
- }
- }
--
--void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
--{
-- const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
-- pgprot_t prot = PAGE_KERNEL_RO;
-- int size, offset;
-- void *dt_virt;
--
-- /*
-- * Check whether the physical FDT address is set and meets the minimum
-- * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
-- * at least 8 bytes so that we can always access the magic and size
-- * fields of the FDT header after mapping the first chunk, double check
-- * here if that is indeed the case.
-- */
-- BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
-- if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
-- return NULL;
--
-- /*
-- * Make sure that the FDT region can be mapped without the need to
-- * allocate additional translation table pages, so that it is safe
-- * to call create_mapping() this early.
-- *
-- * On 64k pages, the FDT will be mapped using PTEs, so we need to
-- * be in the same PMD as the rest of the fixmap.
-- * On 4k pages, we'll use section mappings for the FDT so we only
-- * have to be in the same PUD.
-- */
-- BUILD_BUG_ON(dt_virt_base % SZ_2M);
--
-- BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT !=
-- __fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT);
--
-- offset = dt_phys % SWAPPER_BLOCK_SIZE;
-- dt_virt = (void *)dt_virt_base + offset;
--
-- /* map the first chunk so we can read the size from the header */
-- create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
-- SWAPPER_BLOCK_SIZE, prot);
--
-- if (fdt_magic(dt_virt) != FDT_MAGIC)
-- return NULL;
--
-- size = fdt_totalsize(dt_virt);
-- if (size > MAX_FDT_SIZE)
-- return NULL;
--
-- if (offset + size > SWAPPER_BLOCK_SIZE)
-- create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
-- round_up(offset + size, SWAPPER_BLOCK_SIZE), prot);
--
-- memblock_reserve(dt_phys, size);
--
-- return dt_virt;
--}