diff options
Diffstat (limited to 'target/linux/lantiq')
46 files changed, 0 insertions, 18378 deletions
diff --git a/target/linux/lantiq/config-4.4 b/target/linux/lantiq/config-4.4 deleted file mode 100644 index c8d1b0ef5f..0000000000 --- a/target/linux/lantiq/config-4.4 +++ /dev/null @@ -1,204 +0,0 @@ -CONFIG_ARCH_BINFMT_ELF_STATE=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -# CONFIG_ARCH_HAS_SG_CHAIN is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -# CONFIG_DT_EASY50712 is not set -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_MM_LANTIQ=y -CONFIG_GPIO_STP_XWAY=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MACH_CLKDEV=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_LANTIQ=y -CONFIG_LANTIQ_DT_NONE=y -CONFIG_LANTIQ_ETOP=y -CONFIG_LANTIQ_WDT=y -# CONFIG_LANTIQ_XRX200 is not set -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIPS=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_LANTIQ=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_BRNIMAGE_FW=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_NO_IOPORT_MAP is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_PCI=y -# CONFIG_PCIE_LANTIQ is not set -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LANTIQ=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_LANTIQ=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_XWAY=y -CONFIG_PSB6970_PHY=y -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_RESET_CONTROLLER=y -CONFIG_RTL8366RB_PHY=y -CONFIG_RTL8366_SMI=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SENSORS_LTQ_CPUTEMP is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_LANTIQ=y -# CONFIG_SOC_AMAZON_SE is not set -# CONFIG_SOC_FALCON is not set -CONFIG_SOC_TYPE_XWAY=y -CONFIG_SOC_XWAY=y -CONFIG_SPI=y -CONFIG_SPI_LANTIQ=y -CONFIG_SPI_MASTER=y -CONFIG_SRCU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_USE_OF=y -# CONFIG_XRX200_PHY_FW is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch deleted file mode 100644 index f417b3ef0f..0000000000 --- a/target/linux/lantiq/patches-4.4/0001-MIPS-lantiq-add-pcie-driver.patch +++ /dev/null @@ -1,5521 +0,0 @@ -From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:12:28 +0200 -Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/lantiq/Kconfig | 10 + - arch/mips/lantiq/xway/sysctrl.c | 2 + - arch/mips/pci/Makefile | 2 + - arch/mips/pci/fixup-lantiq-pcie.c | 82 +++ - arch/mips/pci/fixup-lantiq.c | 5 +- - arch/mips/pci/ifxmips_pci_common.h | 57 ++ - arch/mips/pci/ifxmips_pcie.c | 1099 ++++++++++++++++++++++++++++++ - arch/mips/pci/ifxmips_pcie.h | 135 ++++ - arch/mips/pci/ifxmips_pcie_ar10.h | 290 ++++++++ - arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++++ - arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++++ - arch/mips/pci/ifxmips_pcie_pm.c | 176 +++++ - arch/mips/pci/ifxmips_pcie_pm.h | 36 + - arch/mips/pci/ifxmips_pcie_reg.h | 1001 +++++++++++++++++++++++++++ - arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++++ - arch/mips/pci/pci.c | 25 + - arch/mips/pci/pcie-lantiq.h | 1305 ++++++++++++++++++++++++++++++++++++ - drivers/pci/pcie/aer/Kconfig | 2 +- - include/linux/pci.h | 2 + - include/linux/pci_ids.h | 6 + - 20 files changed, 5374 insertions(+), 2 deletions(-) - create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c - create mode 100644 arch/mips/pci/ifxmips_pci_common.h - create mode 100644 arch/mips/pci/ifxmips_pcie.c - create mode 100644 arch/mips/pci/ifxmips_pcie.h - create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h - create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c - create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c - create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c - create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h - create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h - create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h - create mode 100644 arch/mips/pci/pcie-lantiq.h - ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -17,6 +17,7 @@ config SOC_XWAY - bool "XWAY" - select SOC_TYPE_XWAY - select HW_HAS_PCI -+ select ARCH_SUPPORTS_MSI - - config SOC_FALCON - bool "FALCON" -@@ -37,6 +38,15 @@ config PCI_LANTIQ - bool "PCI Support" - depends on SOC_XWAY && PCI - -+config PCIE_LANTIQ -+ bool "PCIE Support" -+ depends on SOC_XWAY && PCI -+ -+config PCIE_LANTIQ_MSI -+ bool -+ depends on PCIE_LANTIQ && PCI_MSI -+ default y -+ - config XRX200_PHY_FW - bool "XRX200 PHY firmware loader" - depends on SOC_XWAY ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -45,6 +45,8 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o - obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o - obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o - obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o -+obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o -+obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o - obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o - obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o - obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o ---- /dev/null -+++ b/arch/mips/pci/fixup-lantiq-pcie.c -@@ -0,0 +1,74 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_fixup_pcie.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \file ifxmips_fixup_pcie.c -+ \ingroup IFX_PCIE -+ \brief PCIe Fixup functions source file -+*/ -+#include <linux/pci.h> -+#include <linux/pci_regs.h> -+#include <linux/pci_ids.h> -+ -+#include <lantiq_soc.h> -+ -+#include "pcie-lantiq.h" -+ -+static void -+ifx_pcie_fixup_resource(struct pci_dev *dev) -+{ -+ u32 reg; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); -+ -+ printk("%s: fixup host controller %s (%04x:%04x)\n", -+ __func__, pci_name(dev), dev->vendor, dev->device); -+ -+ /* Setup COMMAND register */ -+ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | -+ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; -+ pci_write_config_word(dev, PCI_COMMAND, reg); -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); -+ -+static void -+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); -+ -+ if (dev->devfn == PCI_DEVFN(0, 0) && -+ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { -+ -+ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); -+ -+ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); -+ } -+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); -+ mdelay(10); -+} -+ -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, -+ ifx_pcie_rc_class_early_fixup); -+ -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, -+ ifx_pcie_rc_class_early_fixup); ---- a/arch/mips/pci/fixup-lantiq.c -+++ b/arch/mips/pci/fixup-lantiq.c -@@ -8,12 +8,18 @@ - - #include <linux/of_irq.h> - #include <linux/of_pci.h> -+#include "ifxmips_pci_common.h" - - int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL; - int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL; - - int pcibios_plat_dev_init(struct pci_dev *dev) - { -+#ifdef CONFIG_PCIE_LANTIQ -+ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) -+ ifx_pcie_bios_plat_dev_init(dev); -+#endif -+ - if (ltq_pci_plat_arch_init) - return ltq_pci_plat_arch_init(dev); - -@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev - - int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { -+#ifdef CONFIG_PCIE_LANTIQ -+ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) -+ return ifx_pcie_bios_map_irq(dev, slot, pin); -+#endif -+ - return of_irq_parse_and_map_pci(dev, slot, pin); - } ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pci_common.h -@@ -0,0 +1,57 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pci_common.h -+** PROJECT : IFX UEIP -+** MODULES : PCI subsystem -+** -+** DATE : 30 June 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 30 June,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+ -+#ifndef IFXMIPS_PCI_COMMON_H -+#define IFXMIPS_PCI_COMMON_H -+#include <linux/version.h> -+/*! -+ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration -+ \brief PCI/PCIe common parts -+*/ -+ -+/*! -+ \defgroup IFX_PCI_COM_OS OS APIs -+ \ingroup IFX_PCI_COM -+ \brief PCI/PCIe bus driver OS interface functions -+*/ -+/*! -+ \file ifxmips_pci_common.h -+ \ingroup IFX_PCI_COM -+ \brief PCI/PCIe bus driver common OS header file -+*/ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) -+#define IFX_PCI_CONST -+#else -+#define IFX_PCI_CONST const -+#endif -+#ifdef CONFIG_IFX_PCI -+extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); -+extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev); -+#endif /* COFNIG_IFX_PCI */ -+ -+#ifdef CONFIG_PCIE_LANTIQ -+extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); -+extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev); -+#endif -+ -+#endif /* IFXMIPS_PCI_COMMON_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie.c -@@ -0,0 +1,1092 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2009 Lei Chuanhua <chuanhua.lei@infineon.com> -+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/mm.h> -+#include <asm/paccess.h> -+#include <linux/pci.h> -+#include <linux/pci_regs.h> -+#include <linux/module.h> -+ -+#include "ifxmips_pcie.h" -+#include "ifxmips_pcie_reg.h" -+ -+/* Enable 32bit io due to its mem mapped io nature */ -+#define IFX_PCIE_ERROR_INT -+#define IFX_PCIE_IO_32BIT -+ -+#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) -+#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) -+#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) -+#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) -+#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) -+#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) -+#define SM(_v, _f) (((_v) << _f##_S) & (_f)) -+#define IFX_REG_SET_BIT(_f, _r) \ -+ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) -+ -+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 -+ -+static DEFINE_SPINLOCK(ifx_pcie_lock); -+ -+u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); -+ -+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { -+ { -+ .ir_irq = { -+ .irq = IFX_PCIE_IR, -+ .name = "ifx_pcie_rc0", -+ }, -+ -+ .legacy_irq = { -+ { -+ .irq_bit = PCIE_IRN_INTA, -+ .irq = IFX_PCIE_INTA, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTB, -+ .irq = IFX_PCIE_INTB, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTC, -+ .irq = IFX_PCIE_INTC, -+ }, -+ { -+ .irq_bit = PCIE_IRN_INTD, -+ .irq = IFX_PCIE_INTD, -+ }, -+ }, -+ }, -+ -+}; -+ -+void ifx_pcie_debug(const char *fmt, ...) -+{ -+ static char buf[256] = {0}; /* XXX */ -+ va_list ap; -+ -+ va_start(ap, fmt); -+ vsnprintf(buf, sizeof(buf), fmt, ap); -+ va_end(ap); -+ -+ printk("%s", buf); -+} -+ -+ -+static inline int pcie_ltssm_enable(int pcie_port) -+{ -+ int i; -+ -+ /* Enable LTSSM */ -+ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); -+ -+ /* Wait for the link to come up */ -+ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { -+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) -+ return 0; -+ udelay(10); -+ } -+ -+ printk("%s link timeout!!!!!\n", __func__); -+ return -1; -+} -+ -+static inline void pcie_status_register_clear(int pcie_port) -+{ -+ IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); -+ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_RSTS(pcie_port)); -+ IFX_REG_W32(0, PCIE_UES_R(pcie_port)); -+ IFX_REG_W32(0, PCIE_UEMR(pcie_port)); -+ IFX_REG_W32(0, PCIE_UESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_CESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_CEMR(pcie_port)); -+ IFX_REG_W32(0, PCIE_RESR(pcie_port)); -+ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); -+ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); -+ IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); -+ IFX_REG_W32(0, PCIE_QSR(pcie_port)); -+ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); -+} -+ -+static inline int ifx_pcie_link_up(int pcie_port) -+{ -+ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; -+} -+ -+ -+static inline void pcie_mem_io_setup(int pcie_port) -+{ -+ u32 reg; -+ /* -+ * BAR[0:1] readonly register -+ * RC contains only minimal BARs for packets mapped to this device -+ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that -+ * reside on the downstream side fo the bridge. -+ */ -+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) -+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); -+ -+ IFX_REG_W32(reg, PCIE_MBML(pcie_port)); -+ -+ -+#ifdef IFX_PCIE_PREFETCH_MEM_64BIT -+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR) -+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT) -+ | PCIE_PMBL_64BIT_ADDR; -+ IFX_REG_W32(reg, PCIE_PMBL(pcie_port)); -+ -+ /* Must configure upper 32bit */ -+ IFX_REG_W32(0, PCIE_PMBU32(pcie_port)); -+ IFX_REG_W32(0, PCIE_PMLU32(pcie_port)); -+#else -+ /* PCIe_PBML, same as MBML */ -+ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); -+#endif -+ -+ /* IO Address Range */ -+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) -+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); -+#ifdef IFX_PCIE_IO_32BIT -+ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; -+#endif /* IFX_PCIE_IO_32BIT */ -+ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); -+ -+#ifdef IFX_PCIE_IO_32BIT -+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) -+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); -+ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); -+ -+#endif /* IFX_PCIE_IO_32BIT */ -+} -+ -+static inline void -+pcie_device_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Device capability register, set up Maximum payload size */ -+ reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); -+ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; -+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); -+ -+ /* Only available for EP */ -+ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); -+ IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); -+ -+ /* Device control and status register */ -+ /* Set Maximum Read Request size for the device as a Requestor */ -+ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); -+ -+ /* -+ * Request size can be larger than the MPS used, but the completions returned -+ * for the read will be bounded by the MPS size. -+ * In our system, Max request size depends on AHB burst size. It is 64 bytes. -+ * but we set it as 128 as minimum one. -+ */ -+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) -+ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); -+ -+ /* Enable relaxed ordering, no snoop, and all kinds of errors */ -+ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; -+ -+ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); -+} -+ -+static inline void -+pcie_link_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* -+ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM -+ * L0s is reported during link training via TS1 order set by N_FTS -+ */ -+ reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); -+ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; -+ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); -+ IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); -+ -+ /* Link control and status register */ -+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); -+ -+ /* Link Enable, ASPM enabled */ -+ reg &= ~PCIE_LCTLSTS_LINK_DISABLE; -+ -+#ifdef CONFIG_PCIEASPM -+ /* -+ * We use the same physical reference clock that the platform provides on the connector -+ * It paved the way for ASPM to calculate the new exit Latency -+ */ -+ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; -+ reg |= PCIE_LCTLSTS_COM_CLK_CFG; -+ /* -+ * We should disable ASPM by default except that we have dedicated power management support -+ * Enable ASPM will cause the system hangup/instability, performance degration -+ */ -+ reg |= PCIE_LCTLSTS_ASPM_ENABLE; -+#else -+ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; -+#endif /* CONFIG_PCIEASPM */ -+ -+ /* -+ * The maximum size of any completion with data packet is bounded by the MPS setting -+ * in device control register -+ */ -+ -+ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ -+ reg &= ~ PCIE_LCTLSTS_RCB128; -+ -+ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); -+} -+ -+static inline void pcie_error_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* -+ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone -+ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE -+ */ -+ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); -+ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; -+ -+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); -+ -+ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */ -+ reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); -+ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; -+ IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); -+ -+ /* Uncorrectable Error Severity Register, ALL errors are FATAL */ -+ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); -+ -+ /* Correctable Error Mask Register, unmask <enable> all bits */ -+ reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); -+ reg &= ~PCIE_CORRECTABLE_ERR; -+ IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); -+ -+ /* Advanced Error Capabilities and Control Registr */ -+ reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); -+ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; -+ IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); -+ -+ /* Root Error Command Register, Report all types of errors */ -+ reg = IFX_REG_R32(PCIE_RECR(pcie_port)); -+ reg |= PCIE_RECR_ERR_REPORT_EN; -+ IFX_REG_W32(reg, PCIE_RECR(pcie_port)); -+ -+ /* Clear the Root status register */ -+ reg = IFX_REG_R32(PCIE_RESR(pcie_port)); -+ IFX_REG_W32(reg, PCIE_RESR(pcie_port)); -+} -+ -+static inline void pcie_port_logic_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ -+ reg = IFX_REG_R32(PCIE_AFR(pcie_port)); -+ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); -+ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) -+ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); -+ /* L0s and L1 entry latency */ -+ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); -+ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) -+ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); -+ IFX_REG_W32(reg, PCIE_AFR(pcie_port)); -+ -+ -+ /* Port Link Control Register */ -+ reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); -+ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ -+ IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); -+ -+ /* Lane Skew Register */ -+ reg = IFX_REG_R32(PCIE_LSR(pcie_port)); -+ /* Enable ACK/NACK and FC */ -+ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); -+ IFX_REG_W32(reg, PCIE_LSR(pcie_port)); -+ -+ /* Symbol Timer Register and Filter Mask Register 1 */ -+ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); -+ -+ /* Default SKP interval is very accurate already, 5us */ -+ /* Enable IO/CFG transaction */ -+ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; -+ /* Disable FC WDT */ -+ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; -+ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); -+ -+ /* Filter Masker Register 2 */ -+ reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); -+ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; -+ IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); -+ -+ /* VC0 Completion Receive Queue Control Register */ -+ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); -+ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; -+ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); -+ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); -+} -+ -+static inline void pcie_rc_cfg_reg_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Disable LTSSM */ -+ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */ -+ -+ pcie_mem_io_setup(pcie_port); -+ -+ /* XXX, MSI stuff should only apply to EP */ -+ /* MSI Capability: Only enable 32-bit addresses */ -+ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); -+ reg &= ~PCIE_MCAPR_ADDR64_CAP; -+ -+ reg |= PCIE_MCAPR_MSI_ENABLE; -+ -+ /* Disable multiple message */ -+ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); -+ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); -+ -+ -+ /* Enable PME, Soft reset enabled */ -+ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); -+ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; -+ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); -+ -+ /* setup the bus */ -+ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); -+ IFX_REG_W32(reg, PCIE_BNR(pcie_port)); -+ -+ -+ pcie_device_setup(pcie_port); -+ pcie_link_setup(pcie_port); -+ pcie_error_setup(pcie_port); -+ -+ /* Root control and capabilities register */ -+ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); -+ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; -+ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); -+ -+ /* Port VC Capability Register 2 */ -+ reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); -+ reg &= ~PCIE_PVC2_VC_ARB_WRR; -+ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; -+ IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); -+ -+ /* VC0 Resource Capability Register */ -+ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); -+ reg &= ~PCIE_VC0_RC_REJECT_SNOOP; -+ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); -+ -+ pcie_port_logic_setup(pcie_port); -+} -+ -+static int ifx_pcie_wait_phy_link_up(int pcie_port) -+{ -+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */ -+ int i; -+ -+ /* Wait for PHY link is up */ -+ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { -+ if (ifx_pcie_link_up(pcie_port)) { -+ break; -+ } -+ udelay(100); -+ } -+ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { -+ printk(KERN_ERR "%s timeout\n", __func__); -+ return -1; -+ } -+ -+ /* Check data link up or not */ -+ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { -+ printk(KERN_ERR "%s DLL link is still down\n", __func__); -+ return -1; -+ } -+ -+ /* Check Data link active or not */ -+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { -+ printk(KERN_ERR "%s DLL is not active\n", __func__); -+ return -1; -+ } -+ return 0; -+} -+ -+static inline int pcie_app_loigc_setup(int pcie_port) -+{ -+ /* supress ahb bus errrors */ -+ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); -+ -+ /* Pull PCIe EP out of reset */ -+ pcie_device_rst_deassert(pcie_port); -+ -+ /* Start LTSSM training between RC and EP */ -+ pcie_ltssm_enable(pcie_port); -+ -+ /* Check PHY status after enabling LTSSM */ -+ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) -+ return -1; -+ -+ return 0; -+} -+ -+/* -+ * The numbers below are directly from the PCIe spec table 3-4/5. -+ */ -+static inline void pcie_replay_time_update(int pcie_port) -+{ -+ u32 reg; -+ int nlw; -+ int rtl; -+ -+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); -+ -+ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); -+ switch (nlw) { -+ case PCIE_MAX_LENGTH_WIDTH_X1: -+ rtl = 1677; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X2: -+ rtl = 867; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X4: -+ rtl = 462; -+ break; -+ case PCIE_MAX_LENGTH_WIDTH_X8: -+ rtl = 258; -+ break; -+ default: -+ rtl = 1677; -+ break; -+ } -+ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); -+ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; -+ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); -+ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); -+} -+ -+/* -+ * Table 359 Enhanced Configuration Address Mapping1) -+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 -+ * Memory Address PCI Express Configuration Space -+ * A[(20+n-1):20] Bus Number 1 < n < 8 -+ * A[19:15] Device Number -+ * A[14:12] Function Number -+ * A[11:8] Extended Register Number -+ * A[7:2] Register Number -+ * A[1:0] Along with size of the access, used to generate Byte Enables -+ * For VR9, only the address bits [22:0] are mapped to the configuration space: -+ * . Address bits [22:20] select the target bus (1-of-8)1) -+ * . Address bits [19:15] select the target device (1-of-32) on the bus -+ * . Address bits [14:12] select the target function (1-of-8) within the device. -+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space -+ * . Address bits [1:0] define the start byte location within the selected dword. -+ */ -+static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where) -+{ -+ u32 addr; -+ u8 bus; -+ -+ if (!bus_num) { -+ /* type 0 */ -+ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); -+ } else { -+ bus = bus_num; -+ /* type 1, only support 8 buses */ -+ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | -+ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); -+ } -+ return addr; -+} -+ -+static int pcie_valid_config(int pcie_port, int bus, int dev) -+{ -+ /* RC itself */ -+ if ((bus == 0) && (dev == 0)) { -+ return 1; -+ } -+ -+ /* No physical link */ -+ if (!ifx_pcie_link_up(pcie_port)) { -+ return 0; -+ } -+ -+ /* Bus zero only has RC itself -+ * XXX, check if EP will be integrated -+ */ -+ if ((bus == 0) && (dev != 0)) { -+ return 0; -+ } -+ -+ /* Maximum 8 buses supported for VRX */ -+ if (bus > 9) { -+ return 0; -+ } -+ -+ /* -+ * PCIe is PtP link, one bus only supports only one device -+ * except bus zero and PCIe switch which is virtual bus device -+ * The following two conditions really depends on the system design -+ * and attached the device. -+ * XXX, how about more new switch -+ */ -+ if ((bus == 1) && (dev != 0)) { -+ return 0; -+ } -+ -+ if ((bus >= 3) && (dev != 0)) { -+ return 0; -+ } -+ return 1; -+} -+ -+static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg) -+{ -+ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val) -+{ -+ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg) -+{ -+ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val) -+{ -+ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); -+} -+ -+u32 ifx_pcie_bus_enum_read_hack(int where, u32 value) -+{ -+ u32 tvalue = value; -+ -+ if (where == PCI_PRIMARY_BUS) { -+ u8 primary, secondary, subordinate; -+ -+ primary = tvalue & 0xFF; -+ secondary = (tvalue >> 8) & 0xFF; -+ subordinate = (tvalue >> 16) & 0xFF; -+ primary += pcibios_1st_host_bus_nr(); -+ secondary += pcibios_1st_host_bus_nr(); -+ subordinate += pcibios_1st_host_bus_nr(); -+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); -+ } -+ return tvalue; -+} -+ -+u32 ifx_pcie_bus_enum_write_hack(int where, u32 value) -+{ -+ u32 tvalue = value; -+ -+ if (where == PCI_PRIMARY_BUS) { -+ u8 primary, secondary, subordinate; -+ -+ primary = tvalue & 0xFF; -+ secondary = (tvalue >> 8) & 0xFF; -+ subordinate = (tvalue >> 16) & 0xFF; -+ if (primary > 0 && primary != 0xFF) { -+ primary -= pcibios_1st_host_bus_nr(); -+ } -+ -+ if (secondary > 0 && secondary != 0xFF) { -+ secondary -= pcibios_1st_host_bus_nr(); -+ } -+ if (subordinate > 0 && subordinate != 0xFF) { -+ subordinate -= pcibios_1st_host_bus_nr(); -+ } -+ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); -+ } -+ else if (where == PCI_SUBORDINATE_BUS) { -+ u8 subordinate = tvalue & 0xFF; -+ -+ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; -+ tvalue = subordinate; -+ } -+ return tvalue; -+} -+ -+static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, -+ int where, int size, u32 *value) -+{ -+ u32 data = 0; -+ int bus_number = bus->number; -+ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; -+ int ret = PCIBIOS_SUCCESSFUL; -+ struct ifx_pci_controller *ctrl = bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ if (unlikely(size != 1 && size != 2 && size != 4)){ -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ -+ /* Make sure the address is aligned to natural boundary */ -+ if (unlikely(((size - 1) & where))) { -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ -+ /* -+ * If we are second controller, we have to cheat OS so that it assume -+ * its bus number starts from 0 in host controller -+ */ -+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); -+ -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * busses on root 0. -+ */ -+ if (bus->parent == NULL) { -+ bus_number = 0; -+ } -+ -+ /* -+ * PCIe only has a single device connected to it. It is -+ * always device ID 0. Don't bother doing reads for other -+ * device IDs on the first segment. -+ */ -+ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { -+ ret = PCIBIOS_FUNC_NOT_SUPPORTED; -+ goto out; -+ } -+ -+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { -+ *value = 0xffffffff; -+ ret = PCIBIOS_DEVICE_NOT_FOUND; -+ goto out; -+ } -+ -+ PCIE_IRQ_LOCK(ifx_pcie_lock); -+ if (bus_number == 0) { /* RC itself */ -+ u32 t; -+ -+ t = (where & ~3); -+ data = ifx_pcie_rc_cfg_rd(pcie_port, t); -+ } else { -+ u32 addr = pcie_bus_addr(bus_number, devfn, where); -+ -+ data = ifx_pcie_cfg_rd(pcie_port, addr); -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = le32_to_cpu(data); -+ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ } -+ /* To get a correct PCI topology, we have to restore the bus number to OS */ -+ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); -+ -+ PCIE_IRQ_UNLOCK(ifx_pcie_lock); -+ -+ *value = (data >> (8 * (where & 3))) & mask[size & 7]; -+out: -+ return ret; -+} -+ -+static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value) -+{ -+ u32 shift; -+ u32 tdata = data; -+ -+ switch (size) { -+ case 1: -+ shift = (where & 0x3) << 3; -+ tdata &= ~(0xffU << shift); -+ tdata |= ((value & 0xffU) << shift); -+ break; -+ case 2: -+ shift = (where & 3) << 3; -+ tdata &= ~(0xffffU << shift); -+ tdata |= ((value & 0xffffU) << shift); -+ break; -+ case 4: -+ tdata = value; -+ break; -+ } -+ return tdata; -+} -+ -+static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn, -+ int where, int size, u32 value) -+{ -+ int bus_number = bus->number; -+ int ret = PCIBIOS_SUCCESSFUL; -+ struct ifx_pci_controller *ctrl = bus->sysdata; -+ int pcie_port = ctrl->port; -+ u32 tvalue = value; -+ u32 data; -+ -+ /* Make sure the address is aligned to natural boundary */ -+ if (unlikely(((size - 1) & where))) { -+ ret = PCIBIOS_BAD_REGISTER_NUMBER; -+ goto out; -+ } -+ /* -+ * If we are second controller, we have to cheat OS so that it assume -+ * its bus number starts from 0 in host controller -+ */ -+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); -+ -+ /* -+ * We need to force the bus number to be zero on the root -+ * bus. Linux numbers the 2nd root bus to start after all -+ * busses on root 0. -+ */ -+ if (bus->parent == NULL) { -+ bus_number = 0; -+ } -+ -+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { -+ ret = PCIBIOS_DEVICE_NOT_FOUND; -+ goto out; -+ } -+ -+ /* XXX, some PCIe device may need some delay */ -+ PCIE_IRQ_LOCK(ifx_pcie_lock); -+ -+ /* -+ * To configure the correct bus topology using native way, we have to cheat Os so that -+ * it can configure the PCIe hardware correctly. -+ */ -+ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); -+ -+ if (bus_number == 0) { /* RC itself */ -+ u32 t; -+ -+ t = (where & ~3); -+ data = ifx_pcie_rc_cfg_rd(pcie_port, t); -+ -+ data = ifx_pcie_size_to_value(where, size, data, tvalue); -+ -+ ifx_pcie_rc_cfg_wr(pcie_port, t, data); -+ } else { -+ u32 addr = pcie_bus_addr(bus_number, devfn, where); -+ -+ data = ifx_pcie_cfg_rd(pcie_port, addr); -+#ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = le32_to_cpu(data); -+#endif -+ -+ data = ifx_pcie_size_to_value(where, size, data, tvalue); -+#ifdef CONFIG_IFX_PCIE_HW_SWAP -+ data = cpu_to_le32(data); -+#endif -+ ifx_pcie_cfg_wr(pcie_port, addr, data); -+ } -+ PCIE_IRQ_UNLOCK(ifx_pcie_lock); -+out: -+ return ret; -+} -+ -+static struct resource ifx_pcie_io_resource = { -+ .name = "PCIe0 I/O space", -+ .start = PCIE_IO_PHY_BASE, -+ .end = PCIE_IO_PHY_END, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct resource ifx_pcie_mem_resource = { -+ .name = "PCIe0 Memory space", -+ .start = PCIE_MEM_PHY_BASE, -+ .end = PCIE_MEM_PHY_END, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct pci_ops ifx_pcie_ops = { -+ .read = ifx_pcie_read_config, -+ .write = ifx_pcie_write_config, -+}; -+ -+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { -+ { -+ .pcic = { -+ .pci_ops = &ifx_pcie_ops, -+ .mem_resource = &ifx_pcie_mem_resource, -+ .io_resource = &ifx_pcie_io_resource, -+ }, -+ .port = IFX_PCIE_PORT0, -+ }, -+}; -+ -+#ifdef IFX_PCIE_ERROR_INT -+ -+static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id) -+{ -+ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; -+ int pcie_port = ctrl->port; -+ u32 reg; -+ -+ pr_debug("PCIe RC error intr %d\n", irq); -+ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); -+ reg &= PCIE_RC_CORE_COMBINED_INT; -+ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); -+ -+ return IRQ_HANDLED; -+} -+ -+static int -+pcie_rc_core_int_init(int pcie_port) -+{ -+ int ret; -+ -+ /* Enable core interrupt */ -+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); -+ -+ /* Clear it first */ -+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); -+ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0, -+ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); -+ if (ret) -+ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); -+ -+ return ret; -+} -+#endif -+ -+int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ u32 irq_bit = 0; -+ int irq = 0; -+ struct ifx_pci_controller *ctrl = dev->bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); -+ -+ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { -+ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); -+ return -1; -+ } -+ -+ /* Pin index so minus one */ -+ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; -+ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; -+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); -+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); -+ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); -+ return irq; -+} -+ -+int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) -+{ -+ u16 config; -+#ifdef IFX_PCIE_ERROR_INT -+ u32 dconfig; -+ int pos; -+#endif -+ -+ /* Enable reporting System errors and parity errors on all devices */ -+ /* Enable parity checking and error reporting */ -+ pci_read_config_word(dev, PCI_COMMAND, &config); -+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | -+ PCI_COMMAND_FAST_BACK*/; -+ pci_write_config_word(dev, PCI_COMMAND, config); -+ -+ if (dev->subordinate) { -+ /* Set latency timers on sub bridges */ -+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ -+ /* More bridge error detection */ -+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); -+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; -+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); -+ } -+#ifdef IFX_PCIE_ERROR_INT -+ /* Enable the PCIe normal error reporting */ -+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP); -+ if (pos) { -+ -+ /* Disable system error generation in response to error messages */ -+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); -+ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); -+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); -+ -+ /* Clear PCIE Capability's Device Status */ -+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); -+ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); -+ -+ /* Update Device Control */ -+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); -+ /* Correctable Error Reporting */ -+ config |= PCI_EXP_DEVCTL_CERE; -+ /* Non-Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_NFERE; -+ /* Fatal Error Reporting */ -+ config |= PCI_EXP_DEVCTL_FERE; -+ /* Unsupported Request */ -+ config |= PCI_EXP_DEVCTL_URRE; -+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); -+ } -+ -+ /* Find the Advanced Error Reporting capability */ -+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); -+ if (pos) { -+ /* Clear Uncorrectable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); -+ /* Enable reporting of all uncorrectable errors */ -+ /* Uncorrectable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); -+ /* -+ * Leave severity at HW default. This only controls if -+ * errors are reported as uncorrectable or -+ * correctable, not if the error is reported. -+ */ -+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ -+ /* Clear Correctable Error Status */ -+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); -+ /* Enable reporting of all correctable errors */ -+ /* Correctable Error Mask - turned on bits disable errors */ -+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); -+ /* Advanced Error Capabilities */ -+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); -+ /* ECRC Generation Enable */ -+ if (dconfig & PCI_ERR_CAP_ECRC_GENC) { -+ dconfig |= PCI_ERR_CAP_ECRC_GENE; -+ } -+ /* ECRC Check Enable */ -+ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) { -+ dconfig |= PCI_ERR_CAP_ECRC_CHKE; -+ } -+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); -+ -+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ -+ /* Enable Root Port's interrupt in response to error messages */ -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, -+ PCI_ERR_ROOT_CMD_COR_EN | -+ PCI_ERR_ROOT_CMD_NONFATAL_EN | -+ PCI_ERR_ROOT_CMD_FATAL_EN); -+ /* Clear the Root status register */ -+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); -+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); -+ } -+#endif /* IFX_PCIE_ERROR_INT */ -+ /* WAR, only 128 MRRS is supported, force all EPs to support this value */ -+ pcie_set_readrq(dev, 128); -+ return 0; -+} -+ -+static int -+pcie_rc_initialize(int pcie_port) -+{ -+ int i; -+#define IFX_PCIE_PHY_LOOP_CNT 5 -+ -+ pcie_rcu_endian_setup(pcie_port); -+ -+ pcie_ep_gpio_rst_init(pcie_port); -+ -+ /* -+ * XXX, PCIe elastic buffer bug will cause not to be detected. One more -+ * reset PCIe PHY will solve this issue -+ */ -+ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { -+ /* Disable PCIe PHY Analog part for sanity check */ -+ pcie_phy_pmu_disable(pcie_port); -+ -+ pcie_phy_rst_assert(pcie_port); -+ pcie_phy_rst_deassert(pcie_port); -+ -+ /* Make sure PHY PLL is stable */ -+ udelay(20); -+ -+ /* PCIe Core reset enabled, low active, sw programmed */ -+ pcie_core_rst_assert(pcie_port); -+ -+ /* Put PCIe EP in reset status */ -+ pcie_device_rst_assert(pcie_port); -+ -+ /* PCI PHY & Core reset disabled, high active, sw programmed */ -+ pcie_core_rst_deassert(pcie_port); -+ -+ /* Already in a quiet state, program PLL, enable PHY, check ready bit */ -+ pcie_phy_clock_mode_setup(pcie_port); -+ -+ /* Enable PCIe PHY and Clock */ -+ pcie_core_pmu_setup(pcie_port); -+ -+ /* Clear status registers */ -+ pcie_status_register_clear(pcie_port); -+ -+#ifdef CONFIG_PCI_MSI -+ pcie_msi_init(pcie_port); -+#endif /* CONFIG_PCI_MSI */ -+ pcie_rc_cfg_reg_setup(pcie_port); -+ -+ /* Once link is up, break out */ -+ if (pcie_app_loigc_setup(pcie_port) == 0) -+ break; -+ } -+ if (i >= IFX_PCIE_PHY_LOOP_CNT) { -+ printk(KERN_ERR "%s link up failed!!!!!\n", __func__); -+ return -EIO; -+ } -+ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ -+ pcie_replay_time_update(pcie_port); -+ return 0; -+} -+ -+static int __init ifx_pcie_bios_init(void) -+{ -+ void __iomem *io_map_base; -+ int pcie_port; -+ int startup_port; -+ -+ /* Enable AHB Master/ Slave */ -+ pcie_ahb_pmu_setup(); -+ -+ startup_port = IFX_PCIE_PORT0; -+ -+ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ -+ if (pcie_rc_initialize(pcie_port) == 0) { -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", -+ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port)); -+ /* Otherwise, warning will pop up */ -+ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); -+ if (io_map_base == NULL) { -+ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__); -+ return -ENOMEM; -+ } -+ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; -+ -+ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); -+ /* XXX, clear error status */ -+ -+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", -+ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, -+ &ifx_pcie_controller[pcie_port].pcic.io_resource); -+ -+ #ifdef IFX_PCIE_ERROR_INT -+ pcie_rc_core_int_init(pcie_port); -+ #endif /* IFX_PCIE_ERROR_INT */ -+ } -+ } -+ -+ return 0; -+} -+arch_initcall(ifx_pcie_bios_init); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); -+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module"); -+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver"); -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie.h -@@ -0,0 +1,135 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie.h -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+#ifndef IFXMIPS_PCIE_H -+#define IFXMIPS_PCIE_H -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+#include "ifxmips_pci_common.h" -+#include "ifxmips_pcie_reg.h" -+ -+/*! -+ \defgroup IFX_PCIE PCI Express bus driver module -+ \brief PCI Express IP module support VRX200 -+*/ -+ -+/*! -+ \defgroup IFX_PCIE_OS OS APIs -+ \ingroup IFX_PCIE -+ \brief PCIe bus driver OS interface functions -+*/ -+ -+/*! -+ \file ifxmips_pcie.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe module common header file -+*/ -+#define PCIE_IRQ_LOCK(lock) do { \ -+ unsigned long flags; \ -+ spin_lock_irqsave(&(lock), flags); -+#define PCIE_IRQ_UNLOCK(lock) \ -+ spin_unlock_irqrestore(&(lock), flags); \ -+} while (0) -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -+#define IRQF_SHARED SA_SHIRQ -+#endif -+ -+#define PCIE_MSG_MSI 0x00000001 -+#define PCIE_MSG_ISR 0x00000002 -+#define PCIE_MSG_FIXUP 0x00000004 -+#define PCIE_MSG_READ_CFG 0x00000008 -+#define PCIE_MSG_WRITE_CFG 0x00000010 -+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) -+#define PCIE_MSG_REG 0x00000020 -+#define PCIE_MSG_INIT 0x00000040 -+#define PCIE_MSG_ERR 0x00000080 -+#define PCIE_MSG_PHY 0x00000100 -+#define PCIE_MSG_ANY 0x000001ff -+ -+#define IFX_PCIE_PORT0 0 -+#define IFX_PCIE_PORT1 1 -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+#define IFX_PCIE_CORE_NR 2 -+#else -+#define IFX_PCIE_CORE_NR 1 -+#endif -+ -+#define IFX_PCIE_ERROR_INT -+ -+//#define IFX_PCIE_DBG -+ -+#if defined(IFX_PCIE_DBG) -+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ -+ ifx_pcie_debug((_fmt), ##args); \ -+} while (0) -+ -+#define INLINE -+#else -+#define IFX_PCIE_PRINT(_m, _fmt, args...) \ -+ do {} while(0) -+#define INLINE inline -+#endif -+ -+struct ifx_pci_controller { -+ struct pci_controller pcic; -+ -+ /* RC specific, per host bus information */ -+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ -+}; -+ -+typedef struct ifx_pcie_ir_irq { -+ const unsigned int irq; -+ const char name[16]; -+}ifx_pcie_ir_irq_t; -+ -+typedef struct ifx_pcie_legacy_irq{ -+ const u32 irq_bit; -+ const int irq; -+}ifx_pcie_legacy_irq_t; -+ -+typedef struct ifx_pcie_irq { -+ ifx_pcie_ir_irq_t ir_irq; -+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; -+}ifx_pcie_irq_t; -+ -+extern u32 g_pcie_debug_flag; -+extern void ifx_pcie_debug(const char *fmt, ...); -+extern void pcie_phy_clock_mode_setup(int pcie_port); -+extern void pcie_msi_pic_init(int pcie_port); -+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); -+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); -+ -+#define CONFIG_VR9 -+ -+#ifdef CONFIG_VR9 -+#include "ifxmips_pcie_vr9.h" -+#elif defined (CONFIG_AR10) -+#include "ifxmips_pcie_ar10.h" -+#else -+#error "PCIE: platform not defined" -+#endif /* CONFIG_VR9 */ -+ -+#endif /* IFXMIPS_PCIE_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_ar10.h -@@ -0,0 +1,290 @@ -+/**************************************************************************** -+ Copyright (c) 2010 -+ Lantiq Deutschland GmbH -+ Am Campeon 3; 85579 Neubiberg, Germany -+ -+ For licensing information, see the file 'LICENSE' in the root folder of -+ this software module. -+ -+ *****************************************************************************/ -+/*! -+ \file ifxmips_pcie_ar10.h -+ \ingroup IFX_PCIE -+ \brief PCIe RC driver ar10 specific file -+*/ -+ -+#ifndef IFXMIPS_PCIE_AR10_H -+#define IFXMIPS_PCIE_AR10_H -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif /* AUTOCONF_INCLUDED */ -+#include <linux/types.h> -+#include <linux/delay.h> -+ -+/* Project header file */ -+#include <asm/ifx/ifx_types.h> -+#include <asm/ifx/ifx_pmu.h> -+#include <asm/ifx/ifx_gpio.h> -+#include <asm/ifx/ifx_ebu_led.h> -+ -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+ ifx_ebu_led_enable(); -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 1); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 1); -+ } -+} -+ -+static inline void pcie_ahb_pmu_setup(void) -+{ -+ /* XXX, moved to CGU to control AHBM */ -+} -+ -+static inline void pcie_rcu_endian_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ /* Inbound, big endian */ -+ reg |= IFX_RCU_BE_AHB4S; -+ if (pcie_port == 0) { -+ reg |= IFX_RCU_BE_PCIE0M; -+ -+ #ifdef CONFIG_IFX_PCIE_HW_SWAP -+ /* Outbound, software swap needed */ -+ reg |= IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE0S; -+ #else -+ /* Outbound little endian */ -+ reg &= ~IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE0S; -+ #endif -+ } -+ else { -+ reg |= IFX_RCU_BE_PCIE1M; -+ #ifdef CONFIG_IFX_PCIE1_HW_SWAP -+ /* Outbound, software swap needed */ -+ reg |= IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE1S; -+ #else -+ /* Outbound little endian */ -+ reg &= ~IFX_RCU_BE_AHB3M; -+ reg &= ~IFX_RCU_BE_PCIE1S; -+ #endif -+ } -+ -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); -+} -+ -+static inline void pcie_phy_pmu_enable(int pcie_port) -+{ -+ if (pcie_port == 0) { /* XXX, should use macro*/ -+ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_phy_pmu_disable(int pcie_port) -+{ -+ if (pcie_port == 0) { /* XXX, should use macro*/ -+ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+ } -+ else { -+ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+ } -+} -+ -+static inline void pcie_pdi_big_endian(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ if (pcie_port == 0) { -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_BE_PCIE0_PDI; -+ } -+ else { -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_BE_PCIE1_PDI; -+ } -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+} -+ -+static inline void pcie_pdi_pmu_enable(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ /* Enable PDI to access PCIe PHY register */ -+ PDI0_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PDI1_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_core_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ -+ /* Reset Core, bit 22 */ -+ if (pcie_port == 0) { -+ reg |= 0x00400000; -+ } -+ else { -+ reg |= 0x08000000; /* Bit 27 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_core_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg &= ~0x00400000; /* bit 22 */ -+ } -+ else { -+ reg &= ~0x08000000; /* Bit 27 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg |= 0x00001000; /* Bit 12 */ -+ } -+ else { -+ reg |= 0x00002000; /* Bit 13 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ if (pcie_port == 0) { -+ reg &= ~0x00001000; /* Bit 12 */ -+ } -+ else { -+ reg &= ~0x00002000; /* Bit 13 */ -+ } -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 0); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 0); -+ } -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ if (pcie_port == 0) { -+ ifx_ebu_led_set_data(11, 1); -+ } -+ else { -+ ifx_ebu_led_set_data(12, 1); -+ } -+ ifx_ebu_led_disable(); -+} -+ -+static inline void pcie_core_pmu_setup(int pcie_port) -+{ -+ if (pcie_port == 0) { -+ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline void pcie_msi_init(int pcie_port) -+{ -+ pcie_msi_pic_init(pcie_port); -+ if (pcie_port == 0) { -+ MSI0_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+ else { -+ MSI1_PMU_SETUP(IFX_PMU_ENABLE); -+ } -+} -+ -+static inline u32 -+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) -+{ -+ u32 tbus_number = bus_number; -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tbus_number -= pcibios_1st_host_bus_nr(); -+ } -+ } -+#endif /* CONFIG_IFX_PCI */ -+ return tbus_number; -+} -+ -+static inline u32 -+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) -+{ -+ struct pci_dev *pdev; -+ u32 tvalue = value; -+ -+ /* Sanity check */ -+ pdev = pci_get_slot(bus, devfn); -+ if (pdev == NULL) { -+ return tvalue; -+ } -+ -+ /* Only care about PCI bridge */ -+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { -+ return tvalue; -+ } -+ -+ if (read) { /* Read hack */ -+ #ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); -+ } -+ } -+ #endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+ } -+ else { /* Write hack */ -+ #ifdef CONFIG_IFX_PCIE_2ND_CORE -+ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); -+ } -+ } -+ #endif -+ } -+ return tvalue; -+} -+ -+#endif /* IFXMIPS_PCIE_AR10_H */ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_msi.c -@@ -0,0 +1,392 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_msi.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCI MSI sub module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe MSI Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Date $Author $Comment -+** 02 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \defgroup IFX_PCIE_MSI MSI OS APIs -+ \ingroup IFX_PCIE -+ \brief PCIe bus driver OS interface functions -+*/ -+ -+/*! -+ \file ifxmips_pcie_msi.c -+ \ingroup IFX_PCIE -+ \brief PCIe MSI OS interface file -+*/ -+ -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif /* AUTOCONF_INCLUDED */ -+#include <linux/init.h> -+#include <linux/sched.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/kernel_stat.h> -+#include <linux/pci.h> -+#include <linux/msi.h> -+#include <linux/module.h> -+#include <asm/bootinfo.h> -+#include <asm/irq.h> -+#include <asm/traps.h> -+ -+#include <asm/ifx/ifx_types.h> -+#include <asm/ifx/ifx_regs.h> -+#include <asm/ifx/common_routines.h> -+#include <asm/ifx/irq.h> -+ -+#include "ifxmips_pcie_reg.h" -+#include "ifxmips_pcie.h" -+ -+#define IFX_MSI_IRQ_NUM 16 -+ -+enum { -+ IFX_PCIE_MSI_IDX0 = 0, -+ IFX_PCIE_MSI_IDX1, -+ IFX_PCIE_MSI_IDX2, -+ IFX_PCIE_MSI_IDX3, -+}; -+ -+typedef struct ifx_msi_irq_idx { -+ const int irq; -+ const int idx; -+}ifx_msi_irq_idx_t; -+ -+struct ifx_msi_pic { -+ volatile u32 pic_table[IFX_MSI_IRQ_NUM]; -+ volatile u32 pic_endian; /* 0x40 */ -+}; -+typedef struct ifx_msi_pic *ifx_msi_pic_t; -+ -+typedef struct ifx_msi_irq { -+ const volatile ifx_msi_pic_t msi_pic_p; -+ const u32 msi_phy_base; -+ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; -+ /* -+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is -+ * in use. -+ */ -+ u16 msi_free_irq_bitmask; -+ -+ /* -+ * Each bit in msi_multiple_irq_bitmask tells that the device using -+ * this bit in msi_free_irq_bitmask is also using the next bit. This -+ * is used so we can disable all of the MSI interrupts when a device -+ * uses multiple. -+ */ -+ u16 msi_multiple_irq_bitmask; -+}ifx_msi_irq_t; -+ -+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { -+ { -+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, -+ .msi_phy_base = PCIE_MSI_PHY_BASE, -+ .msi_irq_idx = { -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ }, -+ .msi_free_irq_bitmask = 0, -+ .msi_multiple_irq_bitmask= 0, -+ }, -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ { -+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, -+ .msi_phy_base = PCIE1_MSI_PHY_BASE, -+ .msi_irq_idx = { -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, -+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, -+ }, -+ .msi_free_irq_bitmask = 0, -+ .msi_multiple_irq_bitmask= 0, -+ -+ }, -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+}; -+ -+/* -+ * This lock controls updates to msi_free_irq_bitmask, -+ * msi_multiple_irq_bitmask and pic register settting -+ */ -+static DEFINE_SPINLOCK(ifx_pcie_msi_lock); -+ -+void pcie_msi_pic_init(int pcie_port) -+{ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; -+ spin_unlock(&ifx_pcie_msi_lock); -+} -+ -+/** -+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) -+ * \brief Called when a driver request MSI interrupts instead of the -+ * legacy INT A-D. This routine will allocate multiple interrupts -+ * for MSI devices that support them. A device can override this by -+ * programming the MSI control bits [6:4] before calling -+ * pci_enable_msi(). -+ * -+ * \param[in] pdev Device requesting MSI interrupts -+ * \param[in] desc MSI descriptor -+ * -+ * \return -EINVAL Invalid pcie root port or invalid msi bit -+ * \return 0 OK -+ * \ingroup IFX_PCIE_MSI -+ */ -+int -+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) -+{ -+ int irq, pos; -+ u16 control; -+ int irq_idx; -+ int irq_step; -+ int configured_private_bits; -+ int request_private_bits; -+ struct msi_msg msg; -+ u16 search_mask; -+ struct ifx_pci_controller *ctrl = pdev->bus->sysdata; -+ int pcie_port = ctrl->port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); -+ -+ /* XXX, skip RC MSI itself */ -+ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); -+ return -EINVAL; -+ } -+ -+ /* -+ * Read the MSI config to figure out how many IRQs this device -+ * wants. Most devices only want 1, which will give -+ * configured_private_bits and request_private_bits equal 0. -+ */ -+ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); -+ -+ /* -+ * If the number of private bits has been configured then use -+ * that value instead of the requested number. This gives the -+ * driver the chance to override the number of interrupts -+ * before calling pci_enable_msi(). -+ */ -+ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; -+ if (configured_private_bits == 0) { -+ /* Nothing is configured, so use the hardware requested size */ -+ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; -+ } -+ else { -+ /* -+ * Use the number of configured bits, assuming the -+ * driver wanted to override the hardware request -+ * value. -+ */ -+ request_private_bits = configured_private_bits; -+ } -+ -+ /* -+ * The PCI 2.3 spec mandates that there are at most 32 -+ * interrupts. If this device asks for more, only give it one. -+ */ -+ if (request_private_bits > 5) { -+ request_private_bits = 0; -+ } -+again: -+ /* -+ * The IRQs have to be aligned on a power of two based on the -+ * number being requested. -+ */ -+ irq_step = (1 << request_private_bits); -+ -+ /* Mask with one bit for each IRQ */ -+ search_mask = (1 << irq_step) - 1; -+ -+ /* -+ * We're going to search msi_free_irq_bitmask_lock for zero -+ * bits. This represents an MSI interrupt number that isn't in -+ * use. -+ */ -+ spin_lock(&ifx_pcie_msi_lock); -+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { -+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { -+ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; -+ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; -+ break; -+ } -+ } -+ spin_unlock(&ifx_pcie_msi_lock); -+ -+ /* Make sure the search for available interrupts didn't fail */ -+ if (pos >= IFX_MSI_IRQ_NUM) { -+ if (request_private_bits) { -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " -+ "interrupts, trying just one", __func__, 1 << request_private_bits); -+ request_private_bits = 0; -+ goto again; -+ } -+ else { -+ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); -+ return -EINVAL; -+ } -+ } -+ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; -+ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); -+ -+ /* -+ * Initialize MSI. This has to match the memory-write endianess from the device -+ * Address bits [23:12] -+ */ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | -+ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | -+ SM((1 << pos), IFX_MSI_PIC_MSG_DATA); -+ -+ /* Enable this entry */ -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; -+ spin_unlock(&ifx_pcie_msi_lock); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", -+ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); -+ -+ /* Update the number of IRQs the device has available to it */ -+ control &= ~PCI_MSI_FLAGS_QSIZE; -+ control |= (request_private_bits << 4); -+ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); -+ -+ set_irq_msi(irq, desc); -+ msg.address_hi = 0x0; -+ msg.address_lo = msi_irqs[pcie_port].msi_phy_base; -+ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); -+ -+ write_msi_msg(irq, &msg); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); -+ return 0; -+} -+ -+static int -+pcie_msi_irq_to_port(unsigned int irq, int *port) -+{ -+ int ret = 0; -+ -+ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || -+ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { -+ *port = IFX_PCIE_PORT0; -+ } -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || -+ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { -+ *port = IFX_PCIE_PORT1; -+ } -+#endif /* CONFIG_IFX_PCIE_2ND_CORE */ -+ else { -+ printk(KERN_ERR "%s: Attempted to teardown illegal " -+ "MSI interrupt (%d)\n", __func__, irq); -+ ret = -EINVAL; -+ } -+ return ret; -+} -+ -+/** -+ * \fn void arch_teardown_msi_irq(unsigned int irq) -+ * \brief Called when a device no longer needs its MSI interrupts. All -+ * MSI interrupts for the device are freed. -+ * -+ * \param irq The devices first irq number. There may be multple in sequence. -+ * \return none -+ * \ingroup IFX_PCIE_MSI -+ */ -+void -+arch_teardown_msi_irq(unsigned int irq) -+{ -+ int pos; -+ int number_irqs; -+ u16 bitmask; -+ int pcie_port; -+ -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); -+ -+ BUG_ON(irq > INT_NUM_IM4_IRL31); -+ -+ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { -+ return; -+ } -+ -+ /* Shift the mask to the correct bit location, not always correct -+ * Probally, the first match will be chosen. -+ */ -+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { -+ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) -+ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { -+ break; -+ } -+ } -+ if (pos >= IFX_MSI_IRQ_NUM) { -+ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); -+ return; -+ } -+ spin_lock(&ifx_pcie_msi_lock); -+ /* Disable this entry */ -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; -+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); -+ spin_unlock(&ifx_pcie_msi_lock); -+ /* -+ * Count the number of IRQs we need to free by looking at the -+ * msi_multiple_irq_bitmask. Each bit set means that the next -+ * IRQ is also owned by this device. -+ */ -+ number_irqs = 0; -+ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && -+ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { -+ number_irqs++; -+ } -+ number_irqs++; -+ -+ /* Mask with one bit for each IRQ */ -+ bitmask = (1 << number_irqs) - 1; -+ -+ bitmask <<= pos; -+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { -+ printk(KERN_ERR "%s: Attempted to teardown MSI " -+ "interrupt (%d) not in use\n", __func__, irq); -+ return; -+ } -+ /* Checks are done, update the in use bitmask */ -+ spin_lock(&ifx_pcie_msi_lock); -+ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; -+ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); -+ spin_unlock(&ifx_pcie_msi_lock); -+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); -+} -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); -+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); -+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_phy.c -@@ -0,0 +1,478 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_phy.c -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe PHY sub module -+** -+** DATE : 14 May 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 14 May,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+/*! -+ \file ifxmips_pcie_phy.c -+ \ingroup IFX_PCIE -+ \brief PCIe PHY PLL register programming source file -+*/ -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <asm/paccess.h> -+#include <linux/delay.h> -+ -+#include "ifxmips_pcie_reg.h" -+#include "ifxmips_pcie.h" -+ -+/* PCIe PDI only supports 16 bit operation */ -+ -+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ -+ ((*(volatile u16 *) (__addr)) = (__data)) -+ -+#define IFX_PCIE_PHY_REG_READ16(__addr) \ -+ (*(volatile u16 *) (__addr)) -+ -+#define IFX_PCIE_PHY_REG16(__addr) \ -+ (*(volatile u16 *) (__addr)) -+ -+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ -+ u16 read_data; \ -+ u16 write_data; \ -+ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ -+ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ -+ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ -+} while (0) -+ -+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ -+ -+//#define IFX_PCI_PHY_REG_DUMP -+ -+#ifdef IFX_PCI_PHY_REG_DUMP -+static void -+pcie_phy_reg_dump(int pcie_port) -+{ -+ printk("PLL REGFILE\n"); -+ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port))); -+ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port))); -+ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port))); -+ -+ printk("TX1 REGFILE\n"); -+ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port))); -+ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port))); -+ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port))); -+ -+ printk("TX2 REGFILE\n"); -+ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port))); -+ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port))); -+ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port))); -+ -+ printk("RX1 REGFILE\n"); -+ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port))); -+ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port))); -+ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port))); -+ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port))); -+ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port))); -+} -+#endif /* IFX_PCI_PHY_REG_DUMP */ -+ -+static void -+pcie_phy_comm_setup(int pcie_port) -+{ -+ /* PLL Setting */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); -+ -+ /* increase the bias reference voltage */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); -+ -+ /* Endcnt */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); -+ -+ /* force */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); -+ -+ /* ctrl_lim */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); -+ -+ /* ctrl */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); -+ -+ /* RTERM*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); -+ -+ /* Improved 100MHz clock output */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); -+ -+ /* Reduced CDR BW to avoid glitches */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); -+} -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+static void -+pcie_phy_36mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE -+static void -+pcie_phy_36mhz_ssc_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ -+ /* PLL Setting */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); -+ -+ /* Increase the bias reference voltage */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); -+ -+ /* Endcnt */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); -+ -+ /* Force */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); -+ -+ /* Predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); -+ -+ /* ctrl_lim */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); -+ -+ /* ctrl */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); -+ -+ /* predrv_ser_en */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); -+ -+ /* RTERM*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); -+ -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); -+ -+ /* improved 100MHz clock output */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); -+ -+ /* reduced CDR BW to avoid glitches */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE -+static void -+pcie_phy_25mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); -+ -+ /* en_ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ -+ -+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE -+static void -+pcie_phy_100mhz_mode_setup(int pcie_port) -+{ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+ /* en_ext_mmd_div_ratio */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); -+ -+ /* ext_mmd_div_ratio*/ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); -+ -+ /* pll_ensdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); -+ -+ /* en_const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); -+ -+ /* mmd */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); -+ -+ /* lf_mode */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); -+ -+ /* const_sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); -+ -+ /* const sdm */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); -+ -+ /* pllmod */ -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); -+ -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); -+} -+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ -+ -+static int -+pcie_phy_wait_startup_ready(int pcie_port) -+{ -+ int i; -+ -+ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { -+ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { -+ break; -+ } -+ udelay(10); -+ } -+ if (i >= IFX_PCIE_PLL_TIMEOUT) { -+ printk(KERN_ERR "%s PLL Link timeout\n", __func__); -+ return -1; -+ } -+ return 0; -+} -+ -+static void -+pcie_phy_load_enable(int pcie_port, int slice) -+{ -+ /* Set the load_en of tx/rx slice to '1' */ -+ switch (slice) { -+ case 1: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); -+ break; -+ case 2: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); -+ break; -+ case 3: -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); -+ break; -+ } -+} -+ -+static void -+pcie_phy_load_disable(int pcie_port, int slice) -+{ -+ /* set the load_en of tx/rx slice to '0' */ -+ switch (slice) { -+ case 1: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); -+ break; -+ case 2: -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); -+ break; -+ case 3: -+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); -+ break; -+ } -+} -+ -+static void -+pcie_phy_load_war(int pcie_port) -+{ -+ int slice; -+ -+ for (slice = 1; slice < 4; slice++) { -+ pcie_phy_load_enable(pcie_port, slice); -+ udelay(1); -+ pcie_phy_load_disable(pcie_port, slice); -+ } -+} -+ -+static void -+pcie_phy_tx2_modulation(int pcie_port) -+{ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); -+ mdelay(1); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); -+} -+ -+static void -+pcie_phy_tx1_modulation(int pcie_port) -+{ -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); -+ mdelay(1); -+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); -+} -+ -+static void -+pcie_phy_tx_modulation_war(int pcie_port) -+{ -+ int i; -+ -+#define PCIE_PHY_MODULATION_NUM 5 -+ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { -+ pcie_phy_tx2_modulation(pcie_port); -+ pcie_phy_tx1_modulation(pcie_port); -+ } -+#undef PCIE_PHY_MODULATION_NUM -+} -+ -+void -+pcie_phy_clock_mode_setup(int pcie_port) -+{ -+ pcie_pdi_big_endian(pcie_port); -+ -+ /* Enable PDI to access PCIe PHY register */ -+ pcie_pdi_pmu_enable(pcie_port); -+ -+ /* Configure PLL and PHY clock */ -+ pcie_phy_comm_setup(pcie_port); -+ -+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+ pcie_phy_36mhz_mode_setup(pcie_port); -+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) -+ pcie_phy_36mhz_ssc_mode_setup(pcie_port); -+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) -+ pcie_phy_25mhz_mode_setup(pcie_port); -+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) -+ pcie_phy_100mhz_mode_setup(pcie_port); -+#else -+ #error "PCIE PHY Clock Mode must be chosen first!!!!" -+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ -+ -+ /* Enable PCIe PHY and make PLL setting take effect */ -+ pcie_phy_pmu_enable(pcie_port); -+ -+ /* Check if we are in startup_ready status */ -+ pcie_phy_wait_startup_ready(pcie_port); -+ -+ pcie_phy_load_war(pcie_port); -+ -+ /* Apply TX modulation workarounds */ -+ pcie_phy_tx_modulation_war(pcie_port); -+ -+#ifdef IFX_PCI_PHY_REG_DUMP -+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); -+ pcie_phy_reg_dump(pcie_port); -+#endif -+} -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_pm.c -@@ -0,0 +1,176 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_pm.c -+** PROJECT : IFX UEIP -+** MODULES : PCIE Root Complex Driver -+** -+** DATE : 21 Dec 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIE Root Complex Driver Power Managment -+** COPYRIGHT : Copyright (c) 2009 -+** Lantiq Deutschland GmbH -+** Am Campeon 3, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 21 Dec,2009 Lei Chuanhua First UEIP release -+*******************************************************************************/ -+/*! -+ \defgroup IFX_PCIE_PM Power Management functions -+ \ingroup IFX_PCIE -+ \brief IFX PCIE Root Complex Driver power management functions -+*/ -+ -+/*! -+ \file ifxmips_pcie_pm.c -+ \ingroup IFX_PCIE -+ \brief source file for PCIE Root Complex Driver Power Management -+*/ -+ -+#ifndef EXPORT_SYMTAB -+#define EXPORT_SYMTAB -+#endif -+#ifndef AUTOCONF_INCLUDED -+#include <linux/config.h> -+#endif /* AUTOCONF_INCLUDED */ -+#include <linux/version.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <asm/system.h> -+ -+/* Project header */ -+#include <asm/ifx/ifx_types.h> -+#include <asm/ifx/ifx_regs.h> -+#include <asm/ifx/common_routines.h> -+#include <asm/ifx/ifx_pmcu.h> -+#include "ifxmips_pcie_pm.h" -+ -+/** -+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) -+ * \brief the callback function to request pmcu state in the power management hardware-dependent module -+ * -+ * \param pmcuState This parameter is a PMCU state. -+ * -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) -+{ -+ switch(pmcuState) -+ { -+ case IFX_PMCU_STATE_D0: -+ return IFX_PMCU_RETURN_SUCCESS; -+ case IFX_PMCU_STATE_D1: // Not Applicable -+ return IFX_PMCU_RETURN_DENIED; -+ case IFX_PMCU_STATE_D2: // Not Applicable -+ return IFX_PMCU_RETURN_DENIED; -+ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating -+ return IFX_PMCU_RETURN_SUCCESS; -+ default: -+ return IFX_PMCU_RETURN_DENIED; -+ } -+} -+ -+/** -+ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) -+ * \brief the callback function to get pmcu state in the power management hardware-dependent module -+ -+ * \param pmcuState Pointer to return power state. -+ * -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule -+ * -+ * \param pmcuModule Module -+ * \param newState New state -+ * \param oldState Old state -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule -+ * -+ * \param pmcuModule Module -+ * \param newState New state -+ * \param oldState Old state -+ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully -+ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. -+ * \ingroup IFX_PCIE_PM -+ */ -+static IFX_PMCU_RETURN_t -+ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) -+{ -+ return IFX_PMCU_RETURN_SUCCESS; -+} -+ -+/** -+ * \fn static void ifx_pcie_pmcu_init(void) -+ * \brief Register with central PMCU module -+ * \return none -+ * \ingroup IFX_PCIE_PM -+ */ -+void -+ifx_pcie_pmcu_init(void) -+{ -+ IFX_PMCU_REGISTER_t pmcuRegister; -+ -+ /* XXX, hook driver context */ -+ -+ /* State function register */ -+ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t)); -+ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; -+ pmcuRegister.pmcuModuleNr = 0; -+ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change; -+ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get; -+ pmcuRegister.pre = ifx_pcie_pmcu_prechange; -+ pmcuRegister.post= ifx_pcie_pmcu_postchange; -+ ifx_pmcu_register(&pmcuRegister); -+} -+ -+/** -+ * \fn static void ifx_pcie_pmcu_exit(void) -+ * \brief Unregister with central PMCU module -+ * -+ * \return none -+ * \ingroup IFX_PCIE_PM -+ */ -+void -+ifx_pcie_pmcu_exit(void) -+{ -+ IFX_PMCU_REGISTER_t pmcuUnRegister; -+ -+ /* XXX, hook driver context */ -+ -+ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; -+ pmcuUnRegister.pmcuModuleNr = 0; -+ ifx_pmcu_unregister(&pmcuUnRegister); -+} -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_pm.h -@@ -0,0 +1,36 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_pm.h -+** PROJECT : IFX UEIP -+** MODULES : PCIe Root Complex Driver -+** -+** DATE : 21 Dec 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver Power Managment -+** COPYRIGHT : Copyright (c) 2009 -+** Lantiq Deutschland GmbH -+** Am Campeon 3, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 21 Dec,2009 Lei Chuanhua First UEIP release -+*******************************************************************************/ -+/*! -+ \file ifxmips_pcie_pm.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe Root Complex Driver Power Management -+*/ -+ -+#ifndef IFXMIPS_PCIE_PM_H -+#define IFXMIPS_PCIE_PM_H -+ -+void ifx_pcie_pmcu_init(void); -+void ifx_pcie_pmcu_exit(void); -+ -+#endif /* IFXMIPS_PCIE_PM_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_reg.h -@@ -0,0 +1,1001 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_reg.h -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+#ifndef IFXMIPS_PCIE_REG_H -+#define IFXMIPS_PCIE_REG_H -+/*! -+ \file ifxmips_pcie_reg.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe module register definition -+*/ -+/* PCIe Address Mapping Base */ -+#define PCIE_CFG_PHY_BASE 0x1D000000UL -+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) -+#define PCIE_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE_MEM_PHY_BASE 0x1C000000UL -+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) -+#define PCIE_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) -+ -+#define PCIE_IO_PHY_BASE 0x1D800000UL -+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) -+#define PCIE_IO_SIZE (1 * 1024 * 1024) -+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) -+ -+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) -+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) -+#define PCIE_MSI_PHY_BASE 0x1F600000UL -+ -+#define PCIE_PDI_PHY_BASE 0x1F106800UL -+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) -+#define PCIE_PDI_SIZE 0x400 -+ -+#define PCIE1_CFG_PHY_BASE 0x19000000UL -+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) -+#define PCIE1_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE1_MEM_PHY_BASE 0x18000000UL -+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) -+#define PCIE1_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) -+ -+#define PCIE1_IO_PHY_BASE 0x19800000UL -+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) -+#define PCIE1_IO_SIZE (1 * 1024 * 1024) -+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) -+ -+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) -+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) -+#define PCIE1_MSI_PHY_BASE 0x1F400000UL -+ -+#define PCIE1_PDI_PHY_BASE 0x1F700400UL -+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) -+#define PCIE1_PDI_SIZE 0x400 -+ -+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) -+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) -+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) -+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) -+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) -+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) -+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) -+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) -+ -+/* PCIe Application Logic Register */ -+/* RC Core Control Register */ -+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) -+/* This should be enabled after initializing configuratin registers -+ * Also should check link status retraining bit -+ */ -+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ -+ -+/* RC Core Debug Register */ -+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) -+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 -+ -+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ -+#define PCIE_RC_DR_PM_DEV_STATE_S 9 -+ -+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ -+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ -+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ -+ -+/* Current Power State Definition */ -+enum { -+ PCIE_RC_DR_D0 = 0, -+ PCIE_RC_DR_D1, /* Not supported */ -+ PCIE_RC_DR_D2, /* Not supported */ -+ PCIE_RC_DR_D3, -+ PCIE_RC_DR_UN, -+}; -+ -+/* PHY Link Status Register */ -+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) -+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ -+ -+/* Electromechanical Control Register */ -+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) -+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ -+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ -+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ -+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ -+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ -+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ -+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ -+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ -+ -+/* Interrupt Status Register */ -+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) -+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ -+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ -+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ -+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ -+#define PCIE_IR_SR_AHB_LU_ERR_S 4 -+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ -+#define PCIE_IR_SR_INT_MSG_NUM_S 9 -+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 -+ -+/* Message Control Register */ -+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) -+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ -+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ -+ -+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) -+ -+/* Vendor-Defined Message Requester ID Register */ -+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) -+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF -+#define PCIE_VDM_RID_VDMRID_S 0 -+ -+/* ASPM Control Register */ -+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) -+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ -+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ -+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ -+ -+/* Vendor Message DW0 Register */ -+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) -+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ -+#define PCIE_VM_MSG_DW0_TYPE_S 0 -+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ -+#define PCIE_VM_MSG_DW0_FORMAT_S 5 -+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ -+#define PCIE_VM_MSG_DW0_TC_S 12 -+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ -+#define PCIE_VM_MSG_DW0_ATTR_S 18 -+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ -+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ -+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ -+#define PCIE_VM_MSG_DW0_LEN_S 22 -+ -+/* Format Definition */ -+enum { -+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ -+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ -+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ -+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ -+}; -+ -+/* Traffic Class Definition */ -+enum { -+ PCIE_VM_MSG_TC0 = 0, -+ PCIE_VM_MSG_TC1, -+ PCIE_VM_MSG_TC2, -+ PCIE_VM_MSG_TC3, -+ PCIE_VM_MSG_TC4, -+ PCIE_VM_MSG_TC5, -+ PCIE_VM_MSG_TC6, -+ PCIE_VM_MSG_TC7, -+}; -+ -+/* Attributes Definition */ -+enum { -+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ -+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ -+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ -+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ -+}; -+ -+/* Payload Size Definition */ -+#define PCIE_VM_MSG_LEN_MIN 0 -+#define PCIE_VM_MSG_LEN_MAX 1024 -+ -+/* Vendor Message DW1 Register */ -+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) -+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ -+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 -+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ -+#define PCIE_VM_MSG_DW1_CODE_S 16 -+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ -+#define PCIE_VM_MSG_DW1_TAG_S 24 -+ -+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) -+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) -+ -+/* Vendor Message Request Register */ -+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) -+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ -+ -+ -+/* AHB Slave Side Band Control Register */ -+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) -+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ -+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ -+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ -+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ -+#define PCIE_AHB_SSB_REQ_ATTR_S 3 -+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ -+#define PCIE_AHB_SSB_REQ_TC_S 5 -+ -+/* AHB Master SideBand Ctrl Register */ -+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) -+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ -+#define PCIE_AHB_MSB_RESP_ATTR_S 0 -+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ -+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ -+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ -+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 -+ -+/* AHB Control Register, fixed bus enumeration exception */ -+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) -+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 -+ -+/* Interrupt Enalbe Register */ -+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) -+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) -+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) -+ -+/* PCIe interrupt enable/control/capture register definition */ -+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ -+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ -+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ -+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ -+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ -+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ -+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ -+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ -+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ -+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ -+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ -+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ -+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ -+#define PCIE_IRN_INTA 0x00002000 /* INTA */ -+#define PCIE_IRN_INTB 0x00004000 /* INTB */ -+#define PCIE_IRN_INTC 0x00008000 /* INTC */ -+#define PCIE_IRN_INTD 0x00010000 /* INTD */ -+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ -+ -+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ -+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ -+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ -+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ -+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) -+/* PCIe RC Configuration Register */ -+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) -+ -+/* Bit definition from pci_reg.h */ -+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) -+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) -+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ -+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ -+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ -+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ -+ -+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ -+/* Bus Number Register bits */ -+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF -+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 -+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 -+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 -+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 -+#define PCIE_PNR_SUB_BUS_NUM_S 16 -+ -+/* IO Base/Limit Register bits */ -+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ -+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 -+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 -+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 -+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 -+ -+/* Non-prefetchable Memory Base/Limit Register bit */ -+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ -+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 -+#define PCIE_MBML_MEM_BASE_ADDR_S 4 -+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 -+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 -+ -+/* Prefetchable Memory Base/Limit Register bit */ -+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ -+#define PCIE_PMBL_64BIT_ADDR 0x00000001 -+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 -+#define PCIE_PMBL_UPPER_12BIT_S 4 -+#define PCIE_PMBL_E64MA 0x00010000 -+#define PCIE_PMBL_END_ADDR 0xFFF00000 -+#define PCIE_PMBL_END_ADDR_S 20 -+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ -+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ -+ -+/* I/O Base/Limit Upper 16 bits register */ -+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 -+ -+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) -+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) -+ -+/* Interrupt and Secondary Bridge Control Register */ -+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) -+ -+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF -+#define PCIE_INTRBCTRL_INT_LINE_S 0 -+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 -+#define PCIE_INTRBCTRL_INT_PIN_S 8 -+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ -+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ -+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ -+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ -+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ -+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ -+/* Others are read only */ -+enum { -+ PCIE_INTRBCTRL_INT_NON = 0, -+ PCIE_INTRBCTRL_INTA, -+ PCIE_INTRBCTRL_INTB, -+ PCIE_INTRBCTRL_INTC, -+ PCIE_INTRBCTRL_INTD, -+}; -+ -+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) -+ -+/* Power Management Control and Status Register */ -+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) -+ -+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ -+#define PCIE_PM_CSR_POWER_STATE_S 0 -+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ -+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ -+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ -+ -+/* MSI Capability Register for EP */ -+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) -+ -+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ -+#define PCIE_MCAPR_MSI_CAP_ID_S 0 -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 -+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 -+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ -+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 -+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ -+ -+/* MSI Message Address Register */ -+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) -+ -+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ -+ -+/* MSI Message Upper Address Register */ -+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) -+ -+/* MSI Message Data Register */ -+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) -+ -+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ -+#define PCIE_MD_DATA_S 0 -+ -+/* PCI Express Capability Register */ -+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) -+ -+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ -+#define PCIE_XCAP_ID_S 0 -+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_XCAP_NEXT_CAP_S 8 -+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ -+#define PCIE_XCAP_VER_S 16 -+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ -+#define PCIE_XCAP_DEV_PORT_TYPE_S 20 -+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ -+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ -+#define PCIE_XCAP_MSG_INT_NUM_S 25 -+ -+/* Device Capability Register */ -+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) -+ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 -+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ -+#define PCIE_DCAP_PHANTOM_FUNC_S 3 -+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ -+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ -+#define PCIE_DCAP_EP_L0S_LATENCY_S 6 -+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ -+#define PCIE_DCAP_EP_L1_LATENCY_S 9 -+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ -+ -+/* Maximum payload size supported */ -+enum { -+ PCIE_MAX_PAYLOAD_128 = 0, -+ PCIE_MAX_PAYLOAD_256, -+ PCIE_MAX_PAYLOAD_512, -+ PCIE_MAX_PAYLOAD_1024, -+ PCIE_MAX_PAYLOAD_2048, -+ PCIE_MAX_PAYLOAD_4096, -+}; -+ -+/* Device Control and Status Register */ -+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) -+ -+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ -+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ -+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ -+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 -+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ -+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ -+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ -+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 -+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ -+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ -+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ -+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ -+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ -+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ -+ -+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ -+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ -+ PCIE_DCTLSYS_UR_REQ_EN) -+ -+/* Link Capability Register */ -+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) -+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ -+#define PCIE_LCAP_MAX_LINK_SPEED_S 0 -+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ -+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 -+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ -+#define PCIE_LCAP_ASPM_LEVEL_S 10 -+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ -+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 -+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ -+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 -+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ -+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ -+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ -+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ -+#define PCIE_LCAP_PORT_NUM_S 24 -+ -+/* Maximum Length width definition */ -+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 -+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ -+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 -+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 -+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 -+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C -+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 -+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 -+ -+/* Active State Link PM definition */ -+enum { -+ PCIE_ASPM_RES0 = 0, -+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ -+ PCIE_ASPM_RES1, -+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ -+}; -+ -+/* L0s Exit Latency definition */ -+enum { -+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ -+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ -+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ -+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ -+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ -+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ -+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ -+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ -+}; -+ -+/* L1 Exit Latency definition */ -+enum { -+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ -+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ -+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ -+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ -+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ -+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ -+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ -+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ -+}; -+ -+/* Link Control and Status Register */ -+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) -+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ -+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 -+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ -+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ -+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ -+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ -+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ -+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ -+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ -+#define PCIE_LCTLSTS_LINK_SPEED_S 16 -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 -+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ -+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ -+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ -+ -+/* Slot Capabilities Register */ -+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) -+ -+/* Slot Capabilities */ -+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) -+ -+/* Root Control and Capability Register */ -+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) -+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ -+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ -+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ -+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ -+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ -+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) -+/* Root Status Register */ -+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) -+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ -+#define PCIE_RSTS_PME_REQ_ID_S 0 -+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ -+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ -+ -+/* PCI Express Enhanced Capability Header */ -+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) -+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ -+#define PCIE_ENHANCED_CAP_ID_S 0 -+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ -+#define PCIE_ENHANCED_CAP_VER_S 16 -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 -+ -+/* Uncorrectable Error Status Register */ -+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) -+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ -+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ -+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ -+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ -+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ -+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ -+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ -+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ -+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ -+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ -+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ -+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ -+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ -+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ -+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) -+ -+/* Uncorrectable Error Mask Register, Mask means no report */ -+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) -+ -+/* Uncorrectable Error Severity Register */ -+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) -+ -+/* Correctable Error Status Register */ -+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) -+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ -+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ -+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ -+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ -+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ -+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ -+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) -+ -+/* Correctable Error Mask Register */ -+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) -+ -+/* Advanced Error Capabilities and Control Register */ -+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) -+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ -+#define PCIE_AECCR_FIRST_ERR_PTR_S 0 -+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ -+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ -+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ -+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ -+ -+/* Header Log Register 1 */ -+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) -+ -+/* Header Log Register 2 */ -+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) -+ -+/* Header Log Register 3 */ -+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) -+ -+/* Header Log Register 4 */ -+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) -+ -+/* Root Error Command Register */ -+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) -+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ -+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ -+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ -+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) -+ -+/* Root Error Status Register */ -+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) -+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ -+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ -+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ -+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ -+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ -+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_RESR_AER_INT_MSG_NUM_S 27 -+ -+/* Error Source Indentification Register */ -+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 -+ -+/* VC Enhanced Capability Header */ -+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) -+ -+/* Port VC Capability Register */ -+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) -+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ -+#define PCIE_PVC1_EXT_VC_CNT_S 0 -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 -+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ -+#define PCIE_PVC1_REF_CLK_S 8 -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 -+ -+/* Extended Virtual Channel Count Defintion */ -+#define PCIE_EXT_VC_CNT_MIN 0 -+#define PCIE_EXT_VC_CNT_MAX 7 -+ -+/* Port Arbitration Table Entry Size Definition */ -+enum { -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, -+}; -+ -+/* Port VC Capability Register 2 */ -+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) -+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ -+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 -+ -+/* Port VC Control and Status Register */ -+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) -+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ -+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ -+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 -+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ -+ -+/* VC0 Resource Capability Register */ -+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) -+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ -+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ -+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ -+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) -+ -+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 -+ -+/* VC0 Resource Control Register */ -+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) -+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ -+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ -+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ -+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ -+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ -+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ -+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ -+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ -+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ -+ -+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 -+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ -+#define PCIE_VC0_RC0_VC_ID_S 24 -+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ -+ -+/* VC0 Resource Status Register */ -+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) -+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ -+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ -+ -+/* Ack Latency Timer and Replay Timer Register */ -+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 -+ -+/* Other Message Register */ -+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) -+ -+/* Port Force Link Register */ -+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) -+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ -+#define PCIE_PFLR_LINK_NUM_S 0 -+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ -+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ -+#define PCIE_PFLR_LINK_STATE_S 16 -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 -+ -+/* Ack Frequency Register */ -+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) -+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ -+#define PCIE_AFR_AF_S 0 -+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ -+#define PCIE_AFR_FTS_NUM_S 8 -+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ -+#define PCIE_AFR_COM_FTS_NUM_S 16 -+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ -+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 -+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ -+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 -+#define PCIE_AFR_FTS_NUM_DEFAULT 32 -+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 -+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 -+ -+/* Port Link Control Register */ -+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) -+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ -+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ -+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ -+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ -+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ -+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ -+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ -+#define PCIE_PLCR_LINK_MODE_S 16 -+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ -+ -+/* Lane Skew Register */ -+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) -+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ -+#define PCIE_LSR_LANE_SKEW_NUM_S 0 -+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ -+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ -+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ -+ -+/* Symbol Number Register */ -+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) -+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ -+#define PCIE_SNR_TS_S 0 -+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ -+#define PCIE_SNR_SKP_S 8 -+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ -+#define PCIE_SNR_REPLAY_TIMER_S 14 -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 -+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ -+#define PCIE_SNR_FC_TIMER_S 28 -+ -+/* Symbol Timer Register and Filter Mask Register 1 */ -+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) -+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ -+#define PCIE_STRFMR_SKP_INTERVAL_S 0 -+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ -+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ -+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ -+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ -+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ -+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ -+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ -+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ -+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ -+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ -+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ -+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ -+ -+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ -+ -+/* Filter Masker Register 2 */ -+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) -+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ -+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ -+ -+/* Debug Register 0 */ -+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) -+ -+/* Debug Register 1 */ -+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) -+ -+/* Transmit Posted FC Credit Status Register */ -+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Non-Posted FC Credit Status */ -+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Complete FC Credit Status Register */ -+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 -+ -+/* Queue Status Register */ -+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) -+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ -+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ -+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ -+ -+/* VC Transmit Arbitration Register 1 */ -+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) -+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ -+ -+/* VC Transmit Arbitration Register 2 */ -+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) -+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ -+ -+/* VC0 Posted Receive Queue Control Register */ -+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 -+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ -+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ -+ -+/* VC0 Non-Posted Receive Queue Control */ -+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 -+ -+/* VC0 Completion Receive Queue Control */ -+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 -+ -+/* Applicable to the above three registers */ -+enum { -+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, -+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, -+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, -+}; -+ -+/* VC0 Posted Buffer Depth Register */ -+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Non-Posted Buffer Depth Register */ -+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Completion Buffer Depth Register */ -+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 -+ -+/* PHY Status Register, all zeros in VR9 */ -+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) -+ -+/* PHY Control Register, all zeros in VR9 */ -+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) -+ -+/* -+ * PCIe PDI PHY register definition, suppose all the following -+ * stuff is confidential. -+ * XXX, detailed bit definition -+ */ -+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) -+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) -+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) -+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) -+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) -+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) -+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) -+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) -+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) -+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) -+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) -+ -+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) -+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) -+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) -+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) -+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) -+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) -+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) -+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) -+ -+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) -+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) -+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) -+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) -+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) -+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) -+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) -+ -+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) -+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) -+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) -+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) -+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) -+ -+/* Interrupt related stuff */ -+#define PCIE_LEGACY_DISABLE 0 -+#define PCIE_LEGACY_INTA 1 -+#define PCIE_LEGACY_INTB 2 -+#define PCIE_LEGACY_INTC 3 -+#define PCIE_LEGACY_INTD 4 -+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD -+ -+#endif /* IFXMIPS_PCIE_REG_H */ -+ ---- /dev/null -+++ b/arch/mips/pci/ifxmips_pcie_vr9.h -@@ -0,0 +1,269 @@ -+/**************************************************************************** -+ Copyright (c) 2010 -+ Lantiq Deutschland GmbH -+ Am Campeon 3; 85579 Neubiberg, Germany -+ -+ For licensing information, see the file 'LICENSE' in the root folder of -+ this software module. -+ -+ *****************************************************************************/ -+/*! -+ \file ifxmips_pcie_vr9.h -+ \ingroup IFX_PCIE -+ \brief PCIe RC driver vr9 specific file -+*/ -+ -+#ifndef IFXMIPS_PCIE_VR9_H -+#define IFXMIPS_PCIE_VR9_H -+ -+#include <linux/types.h> -+#include <linux/delay.h> -+ -+#include <linux/gpio.h> -+#include <lantiq_soc.h> -+ -+#define IFX_PCIE_GPIO_RESET 494 -+ -+#define IFX_REG_R32 ltq_r32 -+#define IFX_REG_W32 ltq_w32 -+#define CONFIG_IFX_PCIE_HW_SWAP -+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) -+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) -+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ -+ -+#define IFX_RCU (KSEG1 | 0x1F203000) -+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ -+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ -+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ -+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+ -+#define IFX_PMU1_MODULE_PCIE_PHY (0) -+#define IFX_PMU1_MODULE_PCIE_CTRL (1) -+#define IFX_PMU1_MODULE_PDI (4) -+#define IFX_PMU1_MODULE_MSI (5) -+ -+#define IFX_PMU_MODULE_PCIE_L0_CLK (31) -+ -+ -+#define IFX_GPIO (KSEG1 | 0x1E100B00) -+#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c)) -+#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080)) -+#define OD ((volatile u32*)(IFX_GPIO + 0x0084)) -+#define DIR ((volatile u32*)(IFX_GPIO + 0x0078)) -+#define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) -+ -+ -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+ -+ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); -+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -+ -+/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ -+} -+ -+static inline void pcie_ahb_pmu_setup(void) -+{ -+ /* Enable AHB bus master/slave */ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "ahb"); -+ clk_enable(clk); -+ -+ //AHBM_PMU_SETUP(IFX_PMU_ENABLE); -+ //AHBS_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_rcu_endian_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+#ifdef CONFIG_IFX_PCIE_HW_SWAP -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg |= IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#else -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg &= ~IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); -+} -+ -+static inline void pcie_phy_pmu_enable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "phy"); -+ clk_enable(clk); -+ -+ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_phy_pmu_disable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "phy"); -+ clk_disable(clk); -+ -+// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE); -+} -+ -+static inline void pcie_pdi_big_endian(int pcie_port) -+{ -+ u32 reg; -+ -+ /* SRAM2PDI endianness control. */ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_AHB_BE_PCIE_PDI; -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+} -+ -+static inline void pcie_pdi_pmu_enable(int pcie_port) -+{ -+ /* Enable PDI to access PCIe PHY register */ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "pdi"); -+ clk_enable(clk); -+ //PDI_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_core_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ -+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ -+ reg |= 0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_core_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ /* Reset PCIe PHY & Core, bit 22 */ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg |= 0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); -+// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); -+// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -+ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_core_pmu_setup(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("1d900000.pcie", "ctl"); -+ clk_enable(clk); -+ clk = clk_get_sys("1d900000.pcie", "bus"); -+ clk_enable(clk); -+ -+ /* PCIe Core controller enabled */ -+// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE); -+ -+ /* Enable PCIe L0 Clock */ -+// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline void pcie_msi_init(int pcie_port) -+{ -+ struct clk *clk; -+ pcie_msi_pic_init(pcie_port); -+ clk = clk_get_sys("ltq_pcie", "msi"); -+ clk_enable(clk); -+// MSI_PMU_SETUP(IFX_PMU_ENABLE); -+} -+ -+static inline u32 -+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) -+{ -+ u32 tbus_number = bus_number; -+ -+#ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tbus_number -= pcibios_1st_host_bus_nr(); -+ } -+#endif /* CONFIG_PCI_LANTIQ */ -+ return tbus_number; -+} -+ -+static inline u32 -+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) -+{ -+ struct pci_dev *pdev; -+ u32 tvalue = value; -+ -+ /* Sanity check */ -+ pdev = pci_get_slot(bus, devfn); -+ if (pdev == NULL) { -+ return tvalue; -+ } -+ -+ /* Only care about PCI bridge */ -+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { -+ return tvalue; -+ } -+ -+ if (read) { /* Read hack */ -+ #ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); -+ } -+ #endif /* CONFIG_PCI_LANTIQ */ -+ } -+ else { /* Write hack */ -+ #ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); -+ } -+ #endif -+ } -+ return tvalue; -+} -+ -+#endif /* IFXMIPS_PCIE_VR9_H */ -+ ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -256,6 +256,31 @@ static int __init pcibios_init(void) - - subsys_initcall(pcibios_init); - -+int pcibios_host_nr(void) -+{ -+ int count; -+ struct pci_controller *hose; -+ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) { -+ ; -+ } -+ return count; -+} -+EXPORT_SYMBOL(pcibios_host_nr); -+ -+int pcibios_1st_host_bus_nr(void) -+{ -+ int bus_nr = 0; -+ struct pci_controller *hose = hose_head; -+ -+ if (hose != NULL) { -+ if (hose->bus != NULL) { -+ bus_nr = hose->bus->number + 1; -+ } -+ } -+ return bus_nr; -+} -+EXPORT_SYMBOL(pcibios_1st_host_bus_nr); -+ - static int pcibios_enable_resources(struct pci_dev *dev, int mask) - { - u16 cmd, old_cmd; ---- /dev/null -+++ b/arch/mips/pci/pcie-lantiq.h -@@ -0,0 +1,1305 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifxmips_pcie_reg.h -+** PROJECT : IFX UEIP for VRX200 -+** MODULES : PCIe module -+** -+** DATE : 02 Mar 2009 -+** AUTHOR : Lei Chuanhua -+** DESCRIPTION : PCIe Root Complex Driver -+** COPYRIGHT : Copyright (c) 2009 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** HISTORY -+** $Version $Date $Author $Comment -+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version -+*******************************************************************************/ -+#ifndef IFXMIPS_PCIE_REG_H -+#define IFXMIPS_PCIE_REG_H -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/interrupt.h> -+/*! -+ \file ifxmips_pcie_reg.h -+ \ingroup IFX_PCIE -+ \brief header file for PCIe module register definition -+*/ -+/* PCIe Address Mapping Base */ -+#define PCIE_CFG_PHY_BASE 0x1D000000UL -+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) -+#define PCIE_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE_MEM_PHY_BASE 0x1C000000UL -+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) -+#define PCIE_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) -+ -+#define PCIE_IO_PHY_BASE 0x1D800000UL -+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) -+#define PCIE_IO_SIZE (1 * 1024 * 1024) -+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) -+ -+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) -+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) -+#define PCIE_MSI_PHY_BASE 0x1F600000UL -+ -+#define PCIE_PDI_PHY_BASE 0x1F106800UL -+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) -+#define PCIE_PDI_SIZE 0x400 -+ -+#define PCIE1_CFG_PHY_BASE 0x19000000UL -+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) -+#define PCIE1_CFG_SIZE (8 * 1024 * 1024) -+ -+#define PCIE1_MEM_PHY_BASE 0x18000000UL -+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) -+#define PCIE1_MEM_SIZE (16 * 1024 * 1024) -+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) -+ -+#define PCIE1_IO_PHY_BASE 0x19800000UL -+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) -+#define PCIE1_IO_SIZE (1 * 1024 * 1024) -+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) -+ -+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) -+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) -+#define PCIE1_MSI_PHY_BASE 0x1F400000UL -+ -+#define PCIE1_PDI_PHY_BASE 0x1F700400UL -+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) -+#define PCIE1_PDI_SIZE 0x400 -+ -+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) -+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) -+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) -+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) -+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) -+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) -+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) -+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) -+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) -+ -+/* PCIe Application Logic Register */ -+/* RC Core Control Register */ -+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) -+/* This should be enabled after initializing configuratin registers -+ * Also should check link status retraining bit -+ */ -+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ -+ -+/* RC Core Debug Register */ -+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) -+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ -+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ -+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 -+ -+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ -+#define PCIE_RC_DR_PM_DEV_STATE_S 9 -+ -+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ -+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ -+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ -+ -+/* Current Power State Definition */ -+enum { -+ PCIE_RC_DR_D0 = 0, -+ PCIE_RC_DR_D1, /* Not supported */ -+ PCIE_RC_DR_D2, /* Not supported */ -+ PCIE_RC_DR_D3, -+ PCIE_RC_DR_UN, -+}; -+ -+/* PHY Link Status Register */ -+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) -+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ -+ -+/* Electromechanical Control Register */ -+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) -+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ -+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ -+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ -+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ -+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ -+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ -+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ -+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ -+ -+/* Interrupt Status Register */ -+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) -+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ -+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ -+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ -+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ -+#define PCIE_IR_SR_AHB_LU_ERR_S 4 -+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ -+#define PCIE_IR_SR_INT_MSG_NUM_S 9 -+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 -+ -+/* Message Control Register */ -+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) -+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ -+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ -+ -+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) -+ -+/* Vendor-Defined Message Requester ID Register */ -+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) -+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF -+#define PCIE_VDM_RID_VDMRID_S 0 -+ -+/* ASPM Control Register */ -+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) -+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ -+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ -+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ -+ -+/* Vendor Message DW0 Register */ -+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) -+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ -+#define PCIE_VM_MSG_DW0_TYPE_S 0 -+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ -+#define PCIE_VM_MSG_DW0_FORMAT_S 5 -+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ -+#define PCIE_VM_MSG_DW0_TC_S 12 -+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ -+#define PCIE_VM_MSG_DW0_ATTR_S 18 -+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ -+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ -+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ -+#define PCIE_VM_MSG_DW0_LEN_S 22 -+ -+/* Format Definition */ -+enum { -+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ -+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ -+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ -+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ -+}; -+ -+/* Traffic Class Definition */ -+enum { -+ PCIE_VM_MSG_TC0 = 0, -+ PCIE_VM_MSG_TC1, -+ PCIE_VM_MSG_TC2, -+ PCIE_VM_MSG_TC3, -+ PCIE_VM_MSG_TC4, -+ PCIE_VM_MSG_TC5, -+ PCIE_VM_MSG_TC6, -+ PCIE_VM_MSG_TC7, -+}; -+ -+/* Attributes Definition */ -+enum { -+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ -+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ -+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ -+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ -+}; -+ -+/* Payload Size Definition */ -+#define PCIE_VM_MSG_LEN_MIN 0 -+#define PCIE_VM_MSG_LEN_MAX 1024 -+ -+/* Vendor Message DW1 Register */ -+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) -+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ -+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 -+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ -+#define PCIE_VM_MSG_DW1_CODE_S 16 -+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ -+#define PCIE_VM_MSG_DW1_TAG_S 24 -+ -+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) -+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) -+ -+/* Vendor Message Request Register */ -+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) -+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ -+ -+ -+/* AHB Slave Side Band Control Register */ -+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) -+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ -+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ -+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ -+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ -+#define PCIE_AHB_SSB_REQ_ATTR_S 3 -+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ -+#define PCIE_AHB_SSB_REQ_TC_S 5 -+ -+/* AHB Master SideBand Ctrl Register */ -+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) -+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ -+#define PCIE_AHB_MSB_RESP_ATTR_S 0 -+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ -+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ -+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ -+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ -+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 -+ -+/* AHB Control Register, fixed bus enumeration exception */ -+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) -+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 -+ -+/* Interrupt Enalbe Register */ -+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) -+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) -+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) -+ -+/* PCIe interrupt enable/control/capture register definition */ -+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ -+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ -+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ -+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ -+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ -+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ -+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ -+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ -+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ -+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ -+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ -+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ -+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ -+#define PCIE_IRN_INTA 0x00002000 /* INTA */ -+#define PCIE_IRN_INTB 0x00004000 /* INTB */ -+#define PCIE_IRN_INTC 0x00008000 /* INTC */ -+#define PCIE_IRN_INTD 0x00010000 /* INTD */ -+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ -+ -+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ -+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ -+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ -+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ -+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) -+/* PCIe RC Configuration Register */ -+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) -+ -+/* Bit definition from pci_reg.h */ -+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) -+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) -+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ -+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ -+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ -+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ -+ -+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ -+/* Bus Number Register bits */ -+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF -+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 -+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 -+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 -+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 -+#define PCIE_PNR_SUB_BUS_NUM_S 16 -+ -+/* IO Base/Limit Register bits */ -+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ -+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 -+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 -+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 -+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 -+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 -+ -+/* Non-prefetchable Memory Base/Limit Register bit */ -+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ -+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 -+#define PCIE_MBML_MEM_BASE_ADDR_S 4 -+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 -+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 -+ -+/* Prefetchable Memory Base/Limit Register bit */ -+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ -+#define PCIE_PMBL_64BIT_ADDR 0x00000001 -+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 -+#define PCIE_PMBL_UPPER_12BIT_S 4 -+#define PCIE_PMBL_E64MA 0x00010000 -+#define PCIE_PMBL_END_ADDR 0xFFF00000 -+#define PCIE_PMBL_END_ADDR_S 20 -+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ -+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ -+ -+/* I/O Base/Limit Upper 16 bits register */ -+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 -+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 -+ -+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) -+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) -+ -+/* Interrupt and Secondary Bridge Control Register */ -+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) -+ -+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF -+#define PCIE_INTRBCTRL_INT_LINE_S 0 -+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 -+#define PCIE_INTRBCTRL_INT_PIN_S 8 -+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ -+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ -+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ -+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ -+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ -+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ -+/* Others are read only */ -+enum { -+ PCIE_INTRBCTRL_INT_NON = 0, -+ PCIE_INTRBCTRL_INTA, -+ PCIE_INTRBCTRL_INTB, -+ PCIE_INTRBCTRL_INTC, -+ PCIE_INTRBCTRL_INTD, -+}; -+ -+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) -+ -+/* Power Management Control and Status Register */ -+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) -+ -+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ -+#define PCIE_PM_CSR_POWER_STATE_S 0 -+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ -+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ -+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ -+ -+/* MSI Capability Register for EP */ -+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) -+ -+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ -+#define PCIE_MCAPR_MSI_CAP_ID_S 0 -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 -+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ -+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 -+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ -+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 -+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ -+ -+/* MSI Message Address Register */ -+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) -+ -+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ -+ -+/* MSI Message Upper Address Register */ -+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) -+ -+/* MSI Message Data Register */ -+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) -+ -+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ -+#define PCIE_MD_DATA_S 0 -+ -+/* PCI Express Capability Register */ -+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) -+ -+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ -+#define PCIE_XCAP_ID_S 0 -+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ -+#define PCIE_XCAP_NEXT_CAP_S 8 -+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ -+#define PCIE_XCAP_VER_S 16 -+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ -+#define PCIE_XCAP_DEV_PORT_TYPE_S 20 -+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ -+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ -+#define PCIE_XCAP_MSG_INT_NUM_S 25 -+ -+/* Device Capability Register */ -+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) -+ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ -+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 -+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ -+#define PCIE_DCAP_PHANTOM_FUNC_S 3 -+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ -+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ -+#define PCIE_DCAP_EP_L0S_LATENCY_S 6 -+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ -+#define PCIE_DCAP_EP_L1_LATENCY_S 9 -+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ -+ -+/* Maximum payload size supported */ -+enum { -+ PCIE_MAX_PAYLOAD_128 = 0, -+ PCIE_MAX_PAYLOAD_256, -+ PCIE_MAX_PAYLOAD_512, -+ PCIE_MAX_PAYLOAD_1024, -+ PCIE_MAX_PAYLOAD_2048, -+ PCIE_MAX_PAYLOAD_4096, -+}; -+ -+/* Device Control and Status Register */ -+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) -+ -+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ -+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ -+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ -+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ -+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 -+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ -+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ -+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ -+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ -+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 -+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ -+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ -+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ -+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ -+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ -+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ -+ -+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ -+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ -+ PCIE_DCTLSYS_UR_REQ_EN) -+ -+/* Link Capability Register */ -+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) -+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ -+#define PCIE_LCAP_MAX_LINK_SPEED_S 0 -+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ -+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 -+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ -+#define PCIE_LCAP_ASPM_LEVEL_S 10 -+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ -+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 -+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ -+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 -+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ -+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ -+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ -+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ -+#define PCIE_LCAP_PORT_NUM_S 24 -+ -+/* Maximum Length width definition */ -+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 -+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ -+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 -+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 -+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 -+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C -+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 -+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 -+ -+/* Active State Link PM definition */ -+enum { -+ PCIE_ASPM_RES0 = 0, -+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ -+ PCIE_ASPM_RES1, -+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ -+}; -+ -+/* L0s Exit Latency definition */ -+enum { -+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ -+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ -+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ -+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ -+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ -+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ -+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ -+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ -+}; -+ -+/* L1 Exit Latency definition */ -+enum { -+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ -+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ -+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ -+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ -+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ -+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ -+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ -+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ -+}; -+ -+/* Link Control and Status Register */ -+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) -+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ -+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 -+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ -+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ -+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ -+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ -+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ -+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ -+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ -+#define PCIE_LCTLSTS_LINK_SPEED_S 16 -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ -+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 -+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ -+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ -+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ -+ -+/* Slot Capabilities Register */ -+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) -+ -+/* Slot Capabilities */ -+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) -+ -+/* Root Control and Capability Register */ -+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) -+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ -+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ -+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ -+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ -+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ -+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) -+/* Root Status Register */ -+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) -+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ -+#define PCIE_RSTS_PME_REQ_ID_S 0 -+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ -+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ -+ -+/* PCI Express Enhanced Capability Header */ -+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) -+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ -+#define PCIE_ENHANCED_CAP_ID_S 0 -+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ -+#define PCIE_ENHANCED_CAP_VER_S 16 -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ -+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 -+ -+/* Uncorrectable Error Status Register */ -+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) -+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ -+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ -+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ -+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ -+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ -+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ -+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ -+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ -+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ -+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ -+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ -+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ -+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ -+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ -+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) -+ -+/* Uncorrectable Error Mask Register, Mask means no report */ -+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) -+ -+/* Uncorrectable Error Severity Register */ -+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) -+ -+/* Correctable Error Status Register */ -+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) -+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ -+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ -+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ -+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ -+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ -+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ -+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) -+ -+/* Correctable Error Mask Register */ -+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) -+ -+/* Advanced Error Capabilities and Control Register */ -+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) -+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ -+#define PCIE_AECCR_FIRST_ERR_PTR_S 0 -+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ -+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ -+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ -+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ -+ -+/* Header Log Register 1 */ -+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) -+ -+/* Header Log Register 2 */ -+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) -+ -+/* Header Log Register 3 */ -+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) -+ -+/* Header Log Register 4 */ -+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) -+ -+/* Root Error Command Register */ -+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) -+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ -+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ -+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ -+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ -+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) -+ -+/* Root Error Status Register */ -+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) -+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ -+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ -+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ -+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ -+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ -+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ -+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ -+#define PCIE_RESR_AER_INT_MSG_NUM_S 27 -+ -+/* Error Source Indentification Register */ -+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF -+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 -+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 -+ -+/* VC Enhanced Capability Header */ -+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) -+ -+/* Port VC Capability Register */ -+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) -+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ -+#define PCIE_PVC1_EXT_VC_CNT_S 0 -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ -+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 -+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ -+#define PCIE_PVC1_REF_CLK_S 8 -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ -+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 -+ -+/* Extended Virtual Channel Count Defintion */ -+#define PCIE_EXT_VC_CNT_MIN 0 -+#define PCIE_EXT_VC_CNT_MAX 7 -+ -+/* Port Arbitration Table Entry Size Definition */ -+enum { -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, -+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, -+}; -+ -+/* Port VC Capability Register 2 */ -+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) -+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ -+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ -+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 -+ -+/* Port VC Control and Status Register */ -+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) -+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ -+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ -+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 -+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ -+ -+/* VC0 Resource Capability Register */ -+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) -+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ -+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ -+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ -+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ -+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) -+ -+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ -+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ -+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 -+ -+/* VC0 Resource Control Register */ -+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) -+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ -+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ -+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ -+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ -+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ -+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ -+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ -+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ -+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ -+ -+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ -+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 -+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ -+#define PCIE_VC0_RC0_VC_ID_S 24 -+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ -+ -+/* VC0 Resource Status Register */ -+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) -+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ -+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ -+ -+/* Ack Latency Timer and Replay Timer Register */ -+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ -+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ -+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 -+ -+/* Other Message Register */ -+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) -+ -+/* Port Force Link Register */ -+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) -+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ -+#define PCIE_PFLR_LINK_NUM_S 0 -+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ -+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ -+#define PCIE_PFLR_LINK_STATE_S 16 -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ -+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 -+ -+/* Ack Frequency Register */ -+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) -+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ -+#define PCIE_AFR_AF_S 0 -+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ -+#define PCIE_AFR_FTS_NUM_S 8 -+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ -+#define PCIE_AFR_COM_FTS_NUM_S 16 -+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ -+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 -+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ -+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 -+#define PCIE_AFR_FTS_NUM_DEFAULT 32 -+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 -+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 -+ -+/* Port Link Control Register */ -+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) -+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ -+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ -+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ -+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ -+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ -+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ -+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ -+#define PCIE_PLCR_LINK_MODE_S 16 -+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ -+ -+/* Lane Skew Register */ -+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) -+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ -+#define PCIE_LSR_LANE_SKEW_NUM_S 0 -+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ -+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ -+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ -+ -+/* Symbol Number Register */ -+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) -+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ -+#define PCIE_SNR_TS_S 0 -+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ -+#define PCIE_SNR_SKP_S 8 -+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ -+#define PCIE_SNR_REPLAY_TIMER_S 14 -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ -+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 -+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ -+#define PCIE_SNR_FC_TIMER_S 28 -+ -+/* Symbol Timer Register and Filter Mask Register 1 */ -+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) -+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ -+#define PCIE_STRFMR_SKP_INTERVAL_S 0 -+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ -+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ -+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ -+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ -+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ -+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ -+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ -+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ -+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ -+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ -+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ -+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ -+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ -+ -+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ -+ -+/* Filter Masker Register 2 */ -+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) -+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ -+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ -+ -+/* Debug Register 0 */ -+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) -+ -+/* Debug Register 1 */ -+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) -+ -+/* Transmit Posted FC Credit Status Register */ -+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ -+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ -+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Non-Posted FC Credit Status */ -+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ -+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ -+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 -+ -+/* Transmit Complete FC Credit Status Register */ -+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ -+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ -+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 -+ -+/* Queue Status Register */ -+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) -+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ -+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ -+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ -+ -+/* VC Transmit Arbitration Register 1 */ -+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) -+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ -+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ -+ -+/* VC Transmit Arbitration Register 2 */ -+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) -+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ -+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ -+ -+/* VC0 Posted Receive Queue Control Register */ -+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ -+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ -+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ -+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 -+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ -+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ -+ -+/* VC0 Non-Posted Receive Queue Control */ -+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ -+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ -+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ -+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 -+ -+/* VC0 Completion Receive Queue Control */ -+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ -+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ -+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ -+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 -+ -+/* Applicable to the above three registers */ -+enum { -+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, -+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, -+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, -+}; -+ -+/* VC0 Posted Buffer Depth Register */ -+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ -+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ -+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Non-Posted Buffer Depth Register */ -+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ -+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ -+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 -+ -+/* VC0 Completion Buffer Depth Register */ -+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ -+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ -+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 -+ -+/* PHY Status Register, all zeros in VR9 */ -+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) -+ -+/* PHY Control Register, all zeros in VR9 */ -+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) -+ -+/* -+ * PCIe PDI PHY register definition, suppose all the following -+ * stuff is confidential. -+ * XXX, detailed bit definition -+ */ -+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) -+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) -+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) -+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) -+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) -+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) -+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) -+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) -+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) -+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) -+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) -+ -+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) -+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) -+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) -+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) -+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) -+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) -+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) -+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) -+ -+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) -+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) -+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) -+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) -+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) -+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) -+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) -+ -+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) -+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) -+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) -+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) -+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) -+ -+/* Interrupt related stuff */ -+#define PCIE_LEGACY_DISABLE 0 -+#define PCIE_LEGACY_INTA 1 -+#define PCIE_LEGACY_INTB 2 -+#define PCIE_LEGACY_INTC 3 -+#define PCIE_LEGACY_INTD 4 -+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD -+ -+#define PCIE_IRQ_LOCK(lock) do { \ -+ unsigned long flags; \ -+ spin_lock_irqsave(&(lock), flags); -+#define PCIE_IRQ_UNLOCK(lock) \ -+ spin_unlock_irqrestore(&(lock), flags); \ -+} while (0) -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -+#define IRQF_SHARED SA_SHIRQ -+#endif -+ -+#define PCIE_MSG_MSI 0x00000001 -+#define PCIE_MSG_ISR 0x00000002 -+#define PCIE_MSG_FIXUP 0x00000004 -+#define PCIE_MSG_READ_CFG 0x00000008 -+#define PCIE_MSG_WRITE_CFG 0x00000010 -+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) -+#define PCIE_MSG_REG 0x00000020 -+#define PCIE_MSG_INIT 0x00000040 -+#define PCIE_MSG_ERR 0x00000080 -+#define PCIE_MSG_PHY 0x00000100 -+#define PCIE_MSG_ANY 0x000001ff -+ -+#define IFX_PCIE_PORT0 0 -+#define IFX_PCIE_PORT1 1 -+ -+#ifdef CONFIG_IFX_PCIE_2ND_CORE -+#define IFX_PCIE_CORE_NR 2 -+#else -+#define IFX_PCIE_CORE_NR 1 -+#endif -+ -+//#define IFX_PCIE_ERROR_INT -+ -+//#define IFX_PCIE_DBG -+ -+#if defined(IFX_PCIE_DBG) -+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ -+ if (g_pcie_debug_flag & (_m)) { \ -+ ifx_pcie_debug((_fmt), ##args); \ -+ } \ -+} while (0) -+ -+#define INLINE -+#else -+#define IFX_PCIE_PRINT(_m, _fmt, args...) \ -+ do {} while(0) -+#define INLINE inline -+#endif -+ -+struct ifx_pci_controller { -+ struct pci_controller pcic; -+ -+ /* RC specific, per host bus information */ -+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ -+}; -+ -+typedef struct ifx_pcie_ir_irq { -+ const unsigned int irq; -+ const char name[16]; -+}ifx_pcie_ir_irq_t; -+ -+typedef struct ifx_pcie_legacy_irq{ -+ const u32 irq_bit; -+ const int irq; -+}ifx_pcie_legacy_irq_t; -+ -+typedef struct ifx_pcie_irq { -+ ifx_pcie_ir_irq_t ir_irq; -+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; -+}ifx_pcie_irq_t; -+ -+extern u32 g_pcie_debug_flag; -+extern void ifx_pcie_debug(const char *fmt, ...); -+extern void pcie_phy_clock_mode_setup(int pcie_port); -+extern void pcie_msi_pic_init(int pcie_port); -+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); -+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); -+ -+ -+#include <linux/types.h> -+#include <linux/delay.h> -+#include <linux/gpio.h> -+#include <linux/clk.h> -+ -+#include <lantiq_soc.h> -+ -+#define IFX_PCIE_GPIO_RESET 38 -+#define IFX_REG_R32 ltq_r32 -+#define IFX_REG_W32 ltq_w32 -+#define CONFIG_IFX_PCIE_HW_SWAP -+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) -+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) -+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ -+ -+#define IFX_RCU (KSEG1 | 0x1F203000) -+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ -+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ -+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ -+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE -+ -+#define IFX_PMU1_MODULE_PCIE_PHY (0) -+#define IFX_PMU1_MODULE_PCIE_CTRL (1) -+#define IFX_PMU1_MODULE_PDI (4) -+#define IFX_PMU1_MODULE_MSI (5) -+ -+#define IFX_PMU_MODULE_PCIE_L0_CLK (31) -+ -+ -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+} -+ -+static inline void pcie_ahb_pmu_setup(void) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("ltq_pcie", "ahb"); -+ clk_enable(clk); -+ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS); -+} -+ -+static inline void pcie_rcu_endian_setup(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+#ifdef CONFIG_IFX_PCIE_HW_SWAP -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg |= IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#else -+ reg |= IFX_RCU_AHB_BE_PCIE_M; -+ reg &= ~IFX_RCU_AHB_BE_PCIE_S; -+ reg &= ~IFX_RCU_AHB_BE_XBAR_M; -+#endif /* CONFIG_IFX_PCIE_HW_SWAP */ -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); -+} -+ -+static inline void pcie_phy_pmu_enable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("ltq_pcie", "phy"); -+ clk_enable(clk); -+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY); -+} -+ -+static inline void pcie_phy_pmu_disable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("ltq_pcie", "phy"); -+ clk_disable(clk); -+ //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY); -+} -+ -+static inline void pcie_pdi_big_endian(int pcie_port) -+{ -+ u32 reg; -+ -+ /* SRAM2PDI endianness control. */ -+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); -+ /* Config AHB->PCIe and PDI endianness */ -+ reg |= IFX_RCU_AHB_BE_PCIE_PDI; -+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); -+} -+ -+static inline void pcie_pdi_pmu_enable(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("ltq_pcie", "pdi"); -+ clk_enable(clk); -+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI); -+} -+ -+static inline void pcie_core_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ -+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ -+ reg |= 0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_core_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ /* Reset PCIe PHY & Core, bit 22 */ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00400000; -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_assert(int pcie_port) -+{ -+ u32 reg; -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg |= 0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_phy_rst_deassert(int pcie_port) -+{ -+ u32 reg; -+ -+ /* Make sure one micro-second delay */ -+ udelay(1); -+ -+ reg = IFX_REG_R32(IFX_RCU_RST_REQ); -+ reg &= ~0x00001000; /* Bit 12 */ -+ IFX_REG_W32(reg, IFX_RCU_RST_REQ); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); -+ // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -+// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -+} -+ -+static inline void pcie_core_pmu_setup(int pcie_port) -+{ -+ struct clk *clk; -+ clk = clk_get_sys("ltq_pcie", "ctl"); -+ clk_enable(clk); -+ clk = clk_get_sys("ltq_pcie", "bus"); -+ clk_enable(clk); -+ -+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL); -+ //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK); -+} -+ -+static inline void pcie_msi_init(int pcie_port) -+{ -+ struct clk *clk; -+ pcie_msi_pic_init(pcie_port); -+ clk = clk_get_sys("ltq_pcie", "msi"); -+ clk_enable(clk); -+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI); -+} -+ -+static inline u32 -+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) -+{ -+ u32 tbus_number = bus_number; -+ -+#ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tbus_number -= pcibios_1st_host_bus_nr(); -+ } -+#endif /* CONFIG_PCI_LANTIQ */ -+ return tbus_number; -+} -+ -+static inline u32 -+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) -+{ -+ struct pci_dev *pdev; -+ u32 tvalue = value; -+ -+ /* Sanity check */ -+ pdev = pci_get_slot(bus, devfn); -+ if (pdev == NULL) { -+ return tvalue; -+ } -+ -+ /* Only care about PCI bridge */ -+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { -+ return tvalue; -+ } -+ -+ if (read) { /* Read hack */ -+ #ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); -+ } -+ #endif /* CONFIG_PCI_LANTIQ */ -+ } -+ else { /* Write hack */ -+ #ifdef CONFIG_PCI_LANTIQ -+ if (pcibios_host_nr() > 1) { -+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); -+ } -+ #endif -+ } -+ return tvalue; -+} -+ -+#endif /* IFXMIPS_PCIE_VR9_H */ -+ ---- a/drivers/pci/pcie/aer/Kconfig -+++ b/drivers/pci/pcie/aer/Kconfig -@@ -19,6 +19,7 @@ config PCIEAER - config PCIE_ECRC - bool "PCI Express ECRC settings control" - depends on PCIEAER -+ default n - help - Used to override firmware/bios settings for PCI Express ECRC - (transaction layer end-to-end CRC checking). ---- a/include/linux/pci.h -+++ b/include/linux/pci.h -@@ -1212,6 +1212,8 @@ void pci_walk_bus(struct pci_bus *top, i - void *userdata); - int pci_cfg_space_size(struct pci_dev *dev); - unsigned char pci_bus_max_busnr(struct pci_bus *bus); -+int pcibios_host_nr(void); -+int pcibios_1st_host_bus_nr(void); - void pci_setup_bridge(struct pci_bus *bus); - resource_size_t pcibios_window_alignment(struct pci_bus *bus, - unsigned long type); ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1054,6 +1054,12 @@ - #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 - #define PCI_DEVICE_ID_SGI_IOC4 0x100a - -+#define PCI_VENDOR_ID_INFINEON 0x15D1 -+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F -+#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 -+#define PCI_VENDOR_ID_LANTIQ 0x1BEF -+#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 -+ - #define PCI_VENDOR_ID_WINBOND 0x10ad - #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 - #define PCI_DEVICE_ID_WINBOND_83C553 0x0565 diff --git a/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch deleted file mode 100644 index 53809d0a8f..0000000000 --- a/target/linux/lantiq/patches-4.4/0004-MIPS-lantiq-add-atm-hack.patch +++ /dev/null @@ -1,500 +0,0 @@ -From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Fri, 3 Aug 2012 10:27:25 +0200 -Subject: [PATCH 04/36] MIPS: lantiq: add atm hack - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++ - arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++ - arch/mips/lantiq/irq.c | 2 + - arch/mips/mm/cache.c | 2 + - include/uapi/linux/atm.h | 6 + - net/atm/common.c | 6 + - net/atm/proc.c | 2 +- - 7 files changed, 416 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h - create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h - ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h -@@ -0,0 +1,196 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifx_atm.h -+** PROJECT : UEIP -+** MODULES : ATM -+** -+** DATE : 17 Jun 2009 -+** AUTHOR : Xu Liang -+** DESCRIPTION : Global ATM driver header file -+** COPYRIGHT : Copyright (c) 2006 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 07 JUL 2009 Xu Liang Init Version -+*******************************************************************************/ -+ -+#ifndef IFX_ATM_H -+#define IFX_ATM_H -+ -+ -+ -+/*! -+ \defgroup IFX_ATM UEIP Project - ATM driver module -+ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9. -+ */ -+ -+/*! -+ \defgroup IFX_ATM_IOCTL IOCTL Commands -+ \ingroup IFX_ATM -+ \brief IOCTL Commands used by user application. -+ */ -+ -+/*! -+ \defgroup IFX_ATM_STRUCT Structures -+ \ingroup IFX_ATM -+ \brief Structures used by user application. -+ */ -+ -+/*! -+ \file ifx_atm.h -+ \ingroup IFX_ATM -+ \brief ATM driver header file -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_ATM_STRUCT -+ */ -+/*@{*/ -+ -+/* -+ * ATM MIB -+ */ -+ -+/*! -+ \struct atm_cell_ifEntry_t -+ \brief Structure used for Cell Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL". -+ */ -+typedef struct { -+ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */ -+ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */ -+ __u32 ifInErrors; /*!< counter of error ingress cells */ -+ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */ -+ __u32 ifOutErrors; /*!< counter of error egress cells */ -+} atm_cell_ifEntry_t; -+ -+/*! -+ \struct atm_aal5_ifEntry_t -+ \brief Structure used for AAL5 Frame Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5". -+ */ -+typedef struct { -+ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */ -+ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */ -+ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */ -+ __u32 ifInUcastPkts; /*!< counter of ingress packets */ -+ __u32 ifOutUcastPkts; /*!< counter of egress packets */ -+ __u32 ifInErrors; /*!< counter of error ingress packets */ -+ __u32 ifInDiscards; /*!< counter of dropped ingress packets */ -+ __u32 ifOutErros; /*!< counter of error egress packets */ -+ __u32 ifOutDiscards; /*!< counter of dropped egress packets */ -+} atm_aal5_ifEntry_t; -+ -+/*! -+ \struct atm_aal5_vcc_t -+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. -+ -+ This structure is a part of structure "atm_aal5_vcc_x_t". -+ */ -+typedef struct { -+ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */ -+ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet -+ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */ -+} atm_aal5_vcc_t; -+ -+/*! -+ \struct atm_aal5_vcc_x_t -+ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. -+ -+ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC". -+ */ -+typedef struct { -+ int vpi; /*!< VPI of the VCC to get MIB counters */ -+ int vci; /*!< VCI of the VCC to get MIB counters */ -+ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */ -+} atm_aal5_vcc_x_t; -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * IOCTL -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_ATM_IOCTL -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Command -+ */ -+/*! -+ \brief ATM IOCTL Magic Number -+ */ -+#define PPE_ATM_IOC_MAGIC 'o' -+/*! -+ \brief ATM IOCTL Command - Get Cell Level MIB Counters -+ -+ This command is obsolete. User can get cell level MIB from DSL API. -+ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters. -+ */ -+#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) -+/*! -+ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters -+ -+ Get AAL5 packet counters. -+ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters. -+ */ -+#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) -+/*! -+ \brief ATM IOCTL Command - Get Per PVC MIB Counters -+ -+ Get AAL5 packet counters for each PVC. -+ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters. -+ */ -+#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) -+/*! -+ \brief Total Number of ATM IOCTL Commands -+ */ -+#define PPE_ATM_IOC_MAXNR 3 -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * API -+ * #################################### -+ */ -+ -+#ifdef __KERNEL__ -+struct port_cell_info { -+ unsigned int port_num; -+ unsigned int tx_link_rate[2]; -+}; -+#endif -+ -+ -+ -+#endif // IFX_ATM_H -+ ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h -@@ -0,0 +1,203 @@ -+/****************************************************************************** -+** -+** FILE NAME : ifx_ptm.h -+** PROJECT : UEIP -+** MODULES : PTM -+** -+** DATE : 17 Jun 2009 -+** AUTHOR : Xu Liang -+** DESCRIPTION : Global PTM driver header file -+** COPYRIGHT : Copyright (c) 2006 -+** Infineon Technologies AG -+** Am Campeon 1-12, 85579 Neubiberg, Germany -+** -+** This program is free software; you can redistribute it and/or modify -+** it under the terms of the GNU General Public License as published by -+** the Free Software Foundation; either version 2 of the License, or -+** (at your option) any later version. -+** -+** HISTORY -+** $Date $Author $Comment -+** 07 JUL 2009 Xu Liang Init Version -+*******************************************************************************/ -+ -+#ifndef IFX_PTM_H -+#define IFX_PTM_H -+ -+ -+ -+/*! -+ \defgroup IFX_PTM UEIP Project - PTM driver module -+ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9. -+ */ -+ -+/*! -+ \defgroup IFX_PTM_IOCTL IOCTL Commands -+ \ingroup IFX_PTM -+ \brief IOCTL Commands used by user application. -+ */ -+ -+/*! -+ \defgroup IFX_PTM_STRUCT Structures -+ \ingroup IFX_PTM -+ \brief Structures used by user application. -+ */ -+ -+/*! -+ \file ifx_ptm.h -+ \ingroup IFX_PTM -+ \brief PTM driver header file -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+ -+ -+/* -+ * #################################### -+ * IOCTL -+ * #################################### -+ */ -+ -+/*! -+ \addtogroup IFX_PTM_IOCTL -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Command -+ */ -+/*! -+ \brief PTM IOCTL Command - Get codeword MIB counters. -+ -+ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters. -+ */ -+#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1 -+/*! -+ \brief PTM IOCTL Command - Get packet MIB counters. -+ -+ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters. -+ */ -+#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2 -+/*! -+ \brief PTM IOCTL Command - Get firmware configuration (CRC). -+ -+ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC). -+ */ -+#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3 -+/*! -+ \brief PTM IOCTL Command - Set firmware configuration (CRC). -+ -+ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC). -+ */ -+#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4 -+/*! -+ \brief PTM IOCTL Command - Program priority value to TX queue mapping. -+ -+ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping. -+ */ -+#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14 -+ -+/*@}*/ -+ -+ -+/*! -+ \addtogroup IFX_PTM_STRUCT -+ */ -+/*@{*/ -+ -+/* -+ * ioctl Data Type -+ */ -+ -+/*! -+ \typedef PTM_CW_IF_ENTRY_T -+ \brief Wrapping of structure "ptm_cw_ifEntry_t". -+ */ -+/*! -+ \struct ptm_cw_ifEntry_t -+ \brief Structure used for CodeWord level MIB counters. -+ */ -+typedef struct ptm_cw_ifEntry_t { -+ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */ -+ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */ -+ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */ -+ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */ -+ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */ -+} PTM_CW_IF_ENTRY_T; -+ -+/*! -+ \typedef PTM_FRAME_MIB_T -+ \brief Wrapping of structure "ptm_frame_mib_t". -+ */ -+/*! -+ \struct ptm_frame_mib_t -+ \brief Structure used for packet level MIB counters. -+ */ -+typedef struct ptm_frame_mib_t { -+ uint32_t RxCorrect; /*!< output, number of ingress packet */ -+ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */ -+ uint32_t RxDropped; /*!< output, number of dropped ingress packet */ -+ uint32_t TxSend; /*!< output, number of egress packet */ -+} PTM_FRAME_MIB_T; -+ -+/*! -+ \typedef IFX_PTM_CFG_T -+ \brief Wrapping of structure "ptm_cfg_t". -+ */ -+/*! -+ \struct ptm_cfg_t -+ \brief Structure used for ETH/TC CRC configuration. -+ */ -+typedef struct ptm_cfg_t { -+ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */ -+ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */ -+ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */ -+ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */ -+ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */ -+ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */ -+ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */ -+} IFX_PTM_CFG_T; -+ -+/*! -+ \typedef IFX_PTM_PRIO_Q_MAP_T -+ \brief Wrapping of structure "ppe_prio_q_map". -+ */ -+/*! -+ \struct ppe_prio_q_map -+ \brief Structure used for Priority Value to TX Queue mapping. -+ */ -+typedef struct ppe_prio_q_map { -+ int pkt_prio; -+ int qid; -+ int vpi; // ignored in eth interface -+ int vci; // ignored in eth interface -+} IFX_PTM_PRIO_Q_MAP_T; -+ -+/*@}*/ -+ -+ -+ -+/* -+ * #################################### -+ * API -+ * #################################### -+ */ -+ -+#ifdef __KERNEL__ -+struct port_cell_info { -+ unsigned int port_num; -+ unsigned int tx_link_rate[2]; -+}; -+#endif -+ -+ -+ -+#endif // IFX_PTM_H -+ ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -14,6 +14,7 @@ - #include <linux/of_platform.h> - #include <linux/of_address.h> - #include <linux/of_irq.h> -+#include <linux/module.h> - - #include <asm/bootinfo.h> - #include <asm/irq_cpu.h> -@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat - ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); - ltq_icu_w32(im, BIT(offset), isr); - } -+EXPORT_SYMBOL(ltq_mask_and_ack_irq); - - static void ltq_ack_irq(struct irq_data *d) - { ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_wback); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */ - ---- a/include/uapi/linux/atm.h -+++ b/include/uapi/linux/atm.h -@@ -130,8 +130,14 @@ - #define ATM_ABR 4 - #define ATM_ANYCLASS 5 /* compatible with everything */ - -+#define ATM_VBR_NRT ATM_VBR -+#define ATM_VBR_RT 6 -+#define ATM_UBR_PLUS 7 -+#define ATM_GFR 8 -+ - #define ATM_MAX_PCR -1 /* maximum available PCR */ - -+ - struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc - write_unlock_irq(&vcc_sklist_lock); - } - -+struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL; -+EXPORT_SYMBOL(ifx_atm_alloc_tx); -+ - static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size) - { - struct sk_buff *skb; - struct sock *sk = sk_atm(vcc); - -+ if (ifx_atm_alloc_tx != NULL) -+ return ifx_atm_alloc_tx(vcc, size); -+ - if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) { - pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n", - sk_wmem_alloc_get(sk), size, sk->sk_sndbuf); ---- a/net/atm/proc.c -+++ b/net/atm/proc.c -@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil - static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) - { - static const char *const class_name[] = { -- "off", "UBR", "CBR", "VBR", "ABR"}; -+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; - static const char *const aal_name[] = { - "---", "1", "2", "3/4", /* 0- 3 */ - "???", "5", "???", "???", /* 4- 7 */ diff --git a/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch deleted file mode 100644 index 335a1e2616..0000000000 --- a/target/linux/lantiq/patches-4.4/0008-MIPS-lantiq-backport-old-timer-code.patch +++ /dev/null @@ -1,1034 +0,0 @@ -From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:30:56 +0200 -Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++ - arch/mips/lantiq/xway/Makefile | 2 +- - arch/mips/lantiq/xway/timer.c | 845 ++++++++++++++++++++++ - 3 files changed, 1001 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h - create mode 100644 arch/mips/lantiq/xway/timer.c - ---- /dev/null -+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h -@@ -0,0 +1,155 @@ -+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ -+ -+ -+/****************************************************************************** -+ Copyright (c) 2002, Infineon Technologies. All rights reserved. -+ -+ No Warranty -+ Because the program is licensed free of charge, there is no warranty for -+ the program, to the extent permitted by applicable law. Except when -+ otherwise stated in writing the copyright holders and/or other parties -+ provide the program "as is" without warranty of any kind, either -+ expressed or implied, including, but not limited to, the implied -+ warranties of merchantability and fitness for a particular purpose. The -+ entire risk as to the quality and performance of the program is with -+ you. should the program prove defective, you assume the cost of all -+ necessary servicing, repair or correction. -+ -+ In no event unless required by applicable law or agreed to in writing -+ will any copyright holder, or any other party who may modify and/or -+ redistribute the program as permitted above, be liable to you for -+ damages, including any general, special, incidental or consequential -+ damages arising out of the use or inability to use the program -+ (including but not limited to loss of data or data being rendered -+ inaccurate or losses sustained by you or third parties or a failure of -+ the program to operate with any other programs), even if such holder or -+ other party has been advised of the possibility of such damages. -+******************************************************************************/ -+ -+ -+/* -+ * #################################### -+ * Definition -+ * #################################### -+ */ -+ -+/* -+ * Available Timer/Counter Index -+ */ -+#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) -+#define TIMER_ANY 0x00 -+#define TIMER1A TIMER(1, 0) -+#define TIMER1B TIMER(1, 1) -+#define TIMER2A TIMER(2, 0) -+#define TIMER2B TIMER(2, 1) -+#define TIMER3A TIMER(3, 0) -+#define TIMER3B TIMER(3, 1) -+ -+/* -+ * Flag of Timer/Counter -+ * These flags specify the way in which timer is configured. -+ */ -+/* Bit size of timer/counter. */ -+#define TIMER_FLAG_16BIT 0x0000 -+#define TIMER_FLAG_32BIT 0x0001 -+/* Switch between timer and counter. */ -+#define TIMER_FLAG_TIMER 0x0000 -+#define TIMER_FLAG_COUNTER 0x0002 -+/* Stop or continue when overflowing/underflowing. */ -+#define TIMER_FLAG_ONCE 0x0000 -+#define TIMER_FLAG_CYCLIC 0x0004 -+/* Count up or counter down. */ -+#define TIMER_FLAG_UP 0x0000 -+#define TIMER_FLAG_DOWN 0x0008 -+/* Count on specific level or edge. */ -+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 -+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 -+#define TIMER_FLAG_RISE_EDGE 0x0010 -+#define TIMER_FLAG_FALL_EDGE 0x0020 -+#define TIMER_FLAG_ANY_EDGE 0x0030 -+/* Signal is syncronous to module clock or not. */ -+#define TIMER_FLAG_UNSYNC 0x0000 -+#define TIMER_FLAG_SYNC 0x0080 -+/* Different interrupt handle type. */ -+#define TIMER_FLAG_NO_HANDLE 0x0000 -+#if defined(__KERNEL__) -+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 -+#endif // defined(__KERNEL__) -+#define TIMER_FLAG_SIGNAL 0x0300 -+/* Internal clock source or external clock source */ -+#define TIMER_FLAG_INT_SRC 0x0000 -+#define TIMER_FLAG_EXT_SRC 0x1000 -+ -+ -+/* -+ * ioctl Command -+ */ -+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ -+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ -+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ -+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ -+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ -+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ -+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ -+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ -+ -+/* -+ * Data Type Used to Call ioctl -+ */ -+struct gptu_ioctl_param { -+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field is ID of expected * -+ * timer/counter. If it's zero, a timer/counter would * -+ * be dynamically allocated and ID would be stored in * -+ * this field. * -+ * In command GPTU_GET_COUNT_VALUE, this field is * -+ * ignored. * -+ * In other command, this field is ID of timer/counter * -+ * allocated. */ -+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * -+ * GPTU_SET_COUNTER, this field contains flags to * -+ * specify how to configure timer/counter. * -+ * In command GPTU_START_TIMER, zero indicate start * -+ * and non-zero indicate resume timer/counter. * -+ * In other command, this field is ignored. */ -+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * -+ * init/reload value. * -+ * In command GPTU_SET_TIMER, this field contains * -+ * frequency (0.001Hz) of timer. * -+ * In command GPTU_GET_COUNT_VALUE, current count * -+ * value would be stored in this field. * -+ * In command GPTU_CALCULATE_DIVIDER, this field * -+ * contains frequency wanted, and after calculation, * -+ * divider would be stored in this field to overwrite * -+ * the frequency. * -+ * In other command, this field is ignored. */ -+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains process * -+ * ID to which signal would be sent. * -+ * In other command, this field is ignored. */ -+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * -+ * if signal is required, this field contains signal * -+ * number which would be sent. * -+ * In other command, this field is ignored. */ -+}; -+ -+/* -+ * #################################### -+ * Data Type -+ * #################################### -+ */ -+typedef void (*timer_callback)(unsigned long arg); -+ -+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); -+extern int lq_free_timer(unsigned int); -+extern int lq_start_timer(unsigned int, int); -+extern int lq_stop_timer(unsigned int); -+extern int lq_reset_counter_flags(u32 timer, u32 flags); -+extern int lq_get_count_value(unsigned int, unsigned long *); -+extern u32 lq_cal_divider(unsigned long); -+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); -+extern int lq_set_counter(unsigned int timer, unsigned int flag, -+ u32 reload, unsigned long arg1, unsigned long arg2); -+ -+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -1,4 +1,10 @@ --obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o -+obj-y := prom.o sysctrl.o clk.o reset.o dma.o dcdc.o -+ -+ifdef CONFIG_SOC_AMAZON_SE -+obj-y += gptu.o -+else -+obj-y += timer.o -+endif - - obj-y += vmmc.o - ---- /dev/null -+++ b/arch/mips/lantiq/xway/timer.c -@@ -0,0 +1,845 @@ -+#ifndef CONFIG_SOC_AMAZON_SE -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/fs.h> -+#include <linux/miscdevice.h> -+#include <linux/init.h> -+#include <linux/uaccess.h> -+#include <linux/unistd.h> -+#include <linux/errno.h> -+#include <linux/interrupt.h> -+#include <linux/sched.h> -+ -+#include <asm/irq.h> -+#include <asm/div64.h> -+#include "../clk.h" -+ -+#include <lantiq_soc.h> -+#include <lantiq_irq.h> -+#include <lantiq_timer.h> -+ -+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 -+ -+#ifdef TIMER1A -+#define FIRST_TIMER TIMER1A -+#else -+#define FIRST_TIMER 2 -+#endif -+ -+/* -+ * GPTC divider is set or not. -+ */ -+#define GPTU_CLC_RMC_IS_SET 0 -+ -+/* -+ * Timer Interrupt (IRQ) -+ */ -+/* Must be adjusted when ICU driver is available */ -+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) -+ -+/* -+ * Bits Operation -+ */ -+#define GET_BITS(x, msb, lsb) \ -+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) -+#define SET_BITS(x, msb, lsb, value) \ -+ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ -+ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) -+ -+/* -+ * GPTU Register Mapping -+ */ -+#define LQ_GPTU (KSEG1 + 0x1E100A00) -+#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) -+#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) -+#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ -+#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) -+#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) -+#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) -+ -+/* -+ * Clock Control Register -+ */ -+#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) -+#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) -+#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) -+#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) -+#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) -+#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) -+#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) -+ -+#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) -+#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) -+#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) -+ -+/* -+ * ID Register -+ */ -+#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) -+#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) -+#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) -+ -+/* -+ * Control Register of Timer/Counter nX -+ * n is the index of block (1 based index) -+ * X is either A or B -+ */ -+#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) -+#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) -+#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) -+#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) -+#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) -+#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ -+#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) -+#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) -+#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) -+#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) -+ -+#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) -+#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) -+#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) -+#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) -+#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) -+#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) -+#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) -+#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) -+ -+#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) -+#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) -+#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) -+ -+#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) -+ -+#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) -+#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) -+#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) -+#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) -+#define TIMER_FLAG_NONE_EDGE 0x0000 -+#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) -+#define TIMER_FLAG_REAL 0x0000 -+#define TIMER_FLAG_INVERT 0x0040 -+#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) -+#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) -+#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) -+#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 -+#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) -+#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) -+ -+struct timer_dev_timer { -+ unsigned int f_irq_on; -+ unsigned int irq; -+ unsigned int flag; -+ unsigned long arg1; -+ unsigned long arg2; -+}; -+ -+struct timer_dev { -+ struct mutex gptu_mutex; -+ unsigned int number_of_timers; -+ unsigned int occupation; -+ unsigned int f_gptu_on; -+ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; -+}; -+ -+ -+unsigned int ltq_get_fpi_bus_clock(int fpi) { -+ struct clk *clk = clk_get_fpi(); -+ return clk_get_rate(clk); -+} -+ -+ -+static long gptu_ioctl(struct file *, unsigned int, unsigned long); -+static int gptu_open(struct inode *, struct file *); -+static int gptu_release(struct inode *, struct file *); -+ -+static struct file_operations gptu_fops = { -+ .owner = THIS_MODULE, -+ .unlocked_ioctl = gptu_ioctl, -+ .open = gptu_open, -+ .release = gptu_release -+}; -+ -+static struct miscdevice gptu_miscdev = { -+ .minor = MISC_DYNAMIC_MINOR, -+ .name = "gptu", -+ .fops = &gptu_fops, -+}; -+ -+static struct timer_dev timer_dev; -+ -+static irqreturn_t timer_irq_handler(int irq, void *p) -+{ -+ unsigned int timer; -+ unsigned int flag; -+ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; -+ -+ timer = irq - TIMER_INTERRUPT; -+ if (timer < timer_dev.number_of_timers -+ && dev_timer == &timer_dev.timer[timer]) { -+ /* Clear interrupt. */ -+ ltq_w32(1 << timer, LQ_GPTU_IRNCR); -+ -+ /* Call user hanler or signal. */ -+ flag = dev_timer->flag; -+ if (!(timer & 0x01) -+ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ /* 16-bit timer or timer A of 32-bit timer */ -+ switch (TIMER_FLAG_MASK_HANDLE(flag)) { -+ case TIMER_FLAG_CALLBACK_IN_IRQ: -+ case TIMER_FLAG_CALLBACK_IN_HB: -+ if (dev_timer->arg1) -+ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); -+ break; -+ case TIMER_FLAG_SIGNAL: -+ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); -+ break; -+ } -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+static inline void lq_enable_gptu(void) -+{ -+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); -+ clk_enable(clk); -+ -+ //ltq_pmu_enable(PMU_GPT); -+ -+ /* Set divider as 1, disable write protection for SPEN, enable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x01) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(1) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(0); -+} -+ -+static inline void lq_disable_gptu(void) -+{ -+ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); -+ ltq_w32(0x00, LQ_GPTU_IRNEN); -+ ltq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ /* Set divider as 0, enable write protection for SPEN, disable module. */ -+ *LQ_GPTU_CLC = -+ GPTU_CLC_SMC_SET(0x00) | -+ GPTU_CLC_RMC_SET(0x00) | -+ GPTU_CLC_FSOE_SET(0) | -+ GPTU_CLC_SBWE_SET(0) | -+ GPTU_CLC_EDIS_SET(0) | -+ GPTU_CLC_SPEN_SET(0) | -+ GPTU_CLC_DISR_SET(1); -+ -+ clk_enable(clk); -+} -+ -+int lq_request_timer(unsigned int timer, unsigned int flag, -+ unsigned long value, unsigned long arg1, unsigned long arg2) -+{ -+ int ret = 0; -+ unsigned int con_reg, irnen_reg; -+ int n, X; -+ -+ if (timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", -+ timer, flag, value); -+ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) -+ value &= 0xFFFF; -+ else -+ timer &= ~0x01; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ /* -+ * Allocate timer. -+ */ -+ if (timer < FIRST_TIMER) { -+ unsigned int mask; -+ unsigned int shift; -+ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ -+ unsigned int offset = TIMER2A; -+ -+ /* -+ * Pick up a free timer. -+ */ -+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { -+ mask = 1 << offset; -+ shift = 1; -+ } else { -+ mask = 3 << offset; -+ shift = 2; -+ } -+ for (timer = offset; -+ timer < offset + timer_dev.number_of_timers; -+ timer += shift, mask <<= shift) -+ if (!(timer_dev.occupation & mask)) { -+ timer_dev.occupation |= mask; -+ break; -+ } -+ if (timer >= offset + timer_dev.number_of_timers) { -+ printk("failed![%d]\n", __LINE__); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } else -+ ret = timer; -+ } else { -+ register unsigned int mask; -+ -+ /* -+ * Check if the requested timer is free. -+ */ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if ((timer_dev.occupation & mask)) { -+ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", -+ __LINE__, mask, timer_dev.occupation); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EBUSY; -+ } else { -+ timer_dev.occupation |= mask; -+ ret = 0; -+ } -+ } -+ -+ /* -+ * Prepare control register value. -+ */ -+ switch (TIMER_FLAG_MASK_EDGE(flag)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : -+ GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= -+ TIMER_FLAG_MASK_SRC(flag) == -+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : -+ GPTU_CON_SRC_EG_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_SYNC(flag) == -+ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : -+ GPTU_CON_SYNC_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_INVERT(flag) == -+ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : -+ GPTU_CON_EXT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_STOP(flag) == -+ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= -+ TIMER_FLAG_MASK_TYPE(flag) == -+ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : -+ GPTU_CON_CNT_SET(1); -+ con_reg |= -+ TIMER_FLAG_MASK_DIR(flag) == -+ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ /* -+ * Fill up running data. -+ */ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flag; -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; -+ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; -+ -+ /* -+ * Enable GPTU module. -+ */ -+ if (!timer_dev.f_gptu_on) { -+ lq_enable_gptu(); -+ timer_dev.f_gptu_on = 1; -+ } -+ -+ /* -+ * Enable IRQ. -+ */ -+ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) -+ timer_dev.timer[timer - FIRST_TIMER].arg1 = -+ (unsigned long) find_task_by_vpid((int) arg1); -+ -+ irnen_reg = 1 << (timer - FIRST_TIMER); -+ -+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL -+ || (TIMER_FLAG_MASK_HANDLE(flag) == -+ TIMER_FLAG_CALLBACK_IN_IRQ -+ && timer_dev.timer[timer - FIRST_TIMER].arg1)) { -+ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; -+ } -+ } else -+ irnen_reg = 0; -+ -+ /* -+ * Write config register, reload value and enable interrupt. -+ */ -+ n = timer >> 1; -+ X = timer & 0x01; -+ *LQ_GPTU_CON(n, X) = con_reg; -+ *LQ_GPTU_RELOAD(n, X) = value; -+ /* printk("reload value = %d\n", (u32)value); */ -+ *LQ_GPTU_IRNEN |= irnen_reg; -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ printk("successful!\n"); -+ return ret; -+} -+EXPORT_SYMBOL(lq_request_timer); -+ -+int lq_free_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ if (GPTU_CON_EN(n, X)) -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); -+ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); -+ -+ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { -+ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); -+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; -+ } -+ -+ timer_dev.occupation &= ~mask; -+ if (!timer_dev.occupation && timer_dev.f_gptu_on) { -+ lq_disable_gptu(); -+ timer_dev.f_gptu_on = 0; -+ } -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_free_timer); -+ -+int lq_start_timer(unsigned int timer, int is_resume) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == -+ TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); -+ -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_start_timer); -+ -+int lq_stop_timer(unsigned int timer) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_stop_timer); -+ -+int lq_reset_counter_flags(u32 timer, u32 flags) -+{ -+ unsigned int oflag; -+ unsigned int mask, con_reg; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ oflag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ switch (TIMER_FLAG_MASK_EDGE(flags)) { -+ default: -+ case TIMER_FLAG_NONE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x00); -+ break; -+ case TIMER_FLAG_RISE_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x01); -+ break; -+ case TIMER_FLAG_FALL_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x02); -+ break; -+ case TIMER_FLAG_ANY_EDGE: -+ con_reg = GPTU_CON_EDGE_SET(0x03); -+ break; -+ } -+ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); -+ else -+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); -+ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); -+ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); -+ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); -+ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); -+ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); -+ -+ timer_dev.timer[timer - FIRST_TIMER].flag = flags; -+ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) -+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *LQ_GPTU_CON(n, X) = con_reg; -+ smp_wmb(); -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return 0; -+} -+EXPORT_SYMBOL(lq_reset_counter_flags); -+ -+int lq_get_count_value(unsigned int timer, unsigned long *value) -+{ -+ unsigned int flag; -+ unsigned int mask; -+ int n, X; -+ -+ if (!timer_dev.f_gptu_on) -+ return -EINVAL; -+ -+ if (timer < FIRST_TIMER -+ || timer >= FIRST_TIMER + timer_dev.number_of_timers) -+ return -EINVAL; -+ -+ mutex_lock(&timer_dev.gptu_mutex); -+ -+ flag = timer_dev.timer[timer - FIRST_TIMER].flag; -+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) -+ timer &= ~0x01; -+ -+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; -+ if (((timer_dev.occupation & mask) ^ mask)) { -+ mutex_unlock(&timer_dev.gptu_mutex); -+ return -EINVAL; -+ } -+ -+ n = timer >> 1; -+ X = timer & 0x01; -+ -+ *value = *LQ_GPTU_COUNT(n, X); -+ -+ -+ mutex_unlock(&timer_dev.gptu_mutex); -+ -+ return 0; -+} -+EXPORT_SYMBOL(lq_get_count_value); -+ -+u32 lq_cal_divider(unsigned long freq) -+{ -+ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); -+ u32 clock_divider = 1; -+ module_freq = fpi * 1000; -+ do_div(module_freq, clock_divider * freq); -+ return module_freq; -+} -+EXPORT_SYMBOL(lq_cal_divider); -+ -+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, -+ int is_ext_src, unsigned int handle_flag, unsigned long arg1, -+ unsigned long arg2) -+{ -+ unsigned long divider; -+ unsigned int flag; -+ -+ divider = lq_cal_divider(freq); -+ if (divider == 0) -+ return -EINVAL; -+ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) -+ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) -+ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) -+ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN -+ | TIMER_FLAG_MASK_HANDLE(handle_flag); -+ -+ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", -+ timer, freq, divider); -+ return lq_request_timer(timer, flag, divider, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_timer); -+ -+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, -+ unsigned long arg1, unsigned long arg2) -+{ -+ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); -+ return lq_request_timer(timer, flag, reload, arg1, arg2); -+} -+EXPORT_SYMBOL(lq_set_counter); -+ -+static long gptu_ioctl(struct file *file, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret; -+ struct gptu_ioctl_param param; -+ -+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ copy_from_user(¶m, (void *) arg, sizeof(param)); -+ -+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER -+ || GPTU_SET_COUNTER) && param.timer < 2) -+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) -+ && !access_ok(VERIFY_WRITE, arg, -+ sizeof(struct gptu_ioctl_param))) -+ return -EFAULT; -+ -+ switch (cmd) { -+ case GPTU_REQUEST_TIMER: -+ ret = lq_request_timer(param.timer, param.flag, param.value, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_FREE_TIMER: -+ ret = lq_free_timer(param.timer); -+ break; -+ case GPTU_START_TIMER: -+ ret = lq_start_timer(param.timer, param.flag); -+ break; -+ case GPTU_STOP_TIMER: -+ ret = lq_stop_timer(param.timer); -+ break; -+ case GPTU_GET_COUNT_VALUE: -+ ret = lq_get_count_value(param.timer, ¶m.value); -+ if (!ret) -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ break; -+ case GPTU_CALCULATE_DIVIDER: -+ param.value = lq_cal_divider(param.value); -+ if (param.value == 0) -+ ret = -EINVAL; -+ else { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ value, ¶m.value, -+ sizeof(param.value)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_TIMER: -+ ret = lq_set_timer(param.timer, param.value, -+ TIMER_FLAG_MASK_STOP(param.flag) != -+ TIMER_FLAG_ONCE ? 1 : 0, -+ TIMER_FLAG_MASK_SRC(param.flag) == -+ TIMER_FLAG_EXT_SRC ? 1 : 0, -+ TIMER_FLAG_MASK_HANDLE(param.flag) == -+ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : -+ TIMER_FLAG_NO_HANDLE, -+ (unsigned long) param.pid, -+ (unsigned long) param.sig); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ case GPTU_SET_COUNTER: -+ lq_set_counter(param.timer, param.flag, param.value, 0, 0); -+ if (ret > 0) { -+ copy_to_user(&((struct gptu_ioctl_param *) arg)-> -+ timer, &ret, sizeof(&ret)); -+ ret = 0; -+ } -+ break; -+ default: -+ ret = -ENOTTY; -+ } -+ -+ return ret; -+} -+ -+static int gptu_open(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+static int gptu_release(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+int __init lq_gptu_init(void) -+{ -+ int ret; -+ unsigned int i; -+ -+ ltq_w32(0, LQ_GPTU_IRNEN); -+ ltq_w32(0xfff, LQ_GPTU_IRNCR); -+ -+ memset(&timer_dev, 0, sizeof(timer_dev)); -+ mutex_init(&timer_dev.gptu_mutex); -+ -+ lq_enable_gptu(); -+ timer_dev.number_of_timers = GPTU_ID_CFG * 2; -+ lq_disable_gptu(); -+ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) -+ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; -+ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); -+ -+ ret = misc_register(&gptu_miscdev); -+ if (ret) { -+ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); -+ return ret; -+ } else { -+ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); -+ } -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); -+ if (ret) { -+ for (; i >= 0; i--) -+ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); -+ misc_deregister(&gptu_miscdev); -+ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); -+ return ret; -+ } else { -+ timer_dev.timer[i].irq = TIMER_INTERRUPT + i; -+ disable_irq(timer_dev.timer[i].irq); -+ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); -+ } -+ } -+ -+ return 0; -+} -+ -+void __exit lq_gptu_exit(void) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < timer_dev.number_of_timers; i++) { -+ if (timer_dev.timer[i].f_irq_on) -+ disable_irq(timer_dev.timer[i].irq); -+ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); -+ } -+ lq_disable_gptu(); -+ misc_deregister(&gptu_miscdev); -+} -+ -+module_init(lq_gptu_init); -+module_exit(lq_gptu_exit); -+ -+#endif diff --git a/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch deleted file mode 100644 index e03fe085be..0000000000 --- a/target/linux/lantiq/patches-4.4/0012-pinctrl-lantiq-fix-up-pinmux.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Fri, 9 Aug 2013 20:38:15 +0200 -Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux - -We found out how to set the gphy led pinmuxing. - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- - 1 file changed, 26 insertions(+), 2 deletions(-) - ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_de - .confops = &xway_pinconf_ops, - }; - --static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, -+static int mux_apply(struct ltq_pinmux_info *info, - int pin, int mux) - { -- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - int port = PORT(pin); - u32 alt1_reg = GPIO_ALT1(pin); - -@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct - return 0; - } - -+static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, -+ int pin, int mux) -+{ -+ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); -+ -+ return mux_apply(info, pin, mux); -+} -+ - static const struct ltq_cfg_param xway_cfg_params[] = { - {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, - {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, -@@ -682,6 +689,18 @@ static int xway_gpio_dir_out(struct gpio - return 0; - } - -+static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); -+ int i; -+ -+ for (i = 0; i < info->num_exin; i++) -+ if (info->exin[i] == offset) -+ return ltq_eiu_get_irq(i); -+ -+ return -1; -+} -+ - static struct gpio_chip xway_chip = { - .label = "gpio-xway", - .direction_input = xway_gpio_dir_in, -@@ -690,6 +709,7 @@ static struct gpio_chip xway_chip = { - .set = xway_gpio_set, - .request = gpiochip_generic_request, - .free = gpiochip_generic_free, -+ .to_irq = xway_gpio_to_irq, - .base = -1, - }; - diff --git a/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch deleted file mode 100644 index c6d3819c2f..0000000000 --- a/target/linux/lantiq/patches-4.4/0013-MTD-lantiq-xway-fix-invalid-operator.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Sun, 28 Jul 2013 18:03:54 +0200 -Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator - -xway_read_byte should use a logic or and not an add operator when working out -the nand address. - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru - int ret; - - spin_lock_irqsave(&ebu_lock, flags); -- ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA)); -+ ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); - spin_unlock_irqrestore(&ebu_lock, flags); - - return ret; diff --git a/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch deleted file mode 100644 index 6a7785b016..0000000000 --- a/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch +++ /dev/null @@ -1,44 +0,0 @@ -From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Sun, 28 Jul 2013 18:06:39 +0200 -Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be - persistent - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -54,6 +54,8 @@ - #define NAND_CON_CSMUX (1 << 1) - #define NAND_CON_NANDM 1 - -+static u32 xway_latchcmd; -+ - static void xway_reset_chip(struct nand_chip *chip) - { - unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; -@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf - unsigned long flags; - - if (ctrl & NAND_CTRL_CHANGE) { -- nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR); - if (ctrl & NAND_CLE) -- nandaddr |= NAND_WRITE_CMD; -- else -- nandaddr |= NAND_WRITE_ADDR; -- this->IO_ADDR_W = (void __iomem *) nandaddr; -+ xway_latchcmd = NAND_WRITE_CMD; -+ else if (ctrl & NAND_ALE) -+ xway_latchcmd = NAND_WRITE_ADDR; - } - - if (cmd != NAND_CMD_NONE) { - spin_lock_irqsave(&ebu_lock, flags); -- writeb(cmd, this->IO_ADDR_W); -+ writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd)); - while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) - ; - spin_unlock_irqrestore(&ebu_lock, flags); diff --git a/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch deleted file mode 100644 index 4bd166863b..0000000000 --- a/target/linux/lantiq/patches-4.4/0015-MTD-lantiq-xway-remove-endless-loop.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Sun, 28 Jul 2013 18:02:06 +0200 -Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop - -The reset loop logic could run into a endless loop. Lets fix it as requested. - ---> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -59,16 +59,22 @@ static u32 xway_latchcmd; - static void xway_reset_chip(struct nand_chip *chip) - { - unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; -+ unsigned long timeout; - unsigned long flags; - - nandaddr &= ~NAND_WRITE_ADDR; - nandaddr |= NAND_WRITE_CMD; - - /* finish with a reset */ -+ timeout = jiffies + msecs_to_jiffies(20); -+ - spin_lock_irqsave(&ebu_lock, flags); - writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr); -- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) -- ; -+ do { -+ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) -+ break; -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); - spin_unlock_irqrestore(&ebu_lock, flags); - } - diff --git a/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch deleted file mode 100644 index 072caf6696..0000000000 --- a/target/linux/lantiq/patches-4.4/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Sun, 28 Jul 2013 17:59:51 +0200 -Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf - to nand driver - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru - return ret; - } - -+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len) -+{ -+ struct nand_chip *this = mtd->priv; -+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; -+ unsigned long flags; -+ int i; -+ -+ spin_lock_irqsave(&ebu_lock, flags); -+ for (i = 0; i < len; i++) -+ buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); -+ spin_unlock_irqrestore(&ebu_lock, flags); -+} -+ -+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -+{ -+ struct nand_chip *this = mtd->priv; -+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; -+ unsigned long flags; -+ int i; -+ -+ spin_lock_irqsave(&ebu_lock, flags); -+ for (i = 0; i < len; i++) -+ ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA)); -+ spin_unlock_irqrestore(&ebu_lock, flags); -+} -+ - static int xway_nand_probe(struct platform_device *pdev) - { - struct nand_chip *this = platform_get_drvdata(pdev); -@@ -177,6 +203,8 @@ static struct platform_nand_data xway_na - .dev_ready = xway_dev_ready, - .select_chip = xway_select_chip, - .read_byte = xway_read_byte, -+ .read_buf = xway_read_buf, -+ .write_buf = xway_write_buf, - } - }; - diff --git a/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch deleted file mode 100644 index 737469aab5..0000000000 --- a/target/linux/lantiq/patches-4.4/0017-MTD-xway-fix-nand-locking.patch +++ /dev/null @@ -1,89 +0,0 @@ -From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:55:31 +0200 -Subject: [PATCH 17/36] MTD: xway: fix nand locking - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 15 +++------------ - 1 file changed, 3 insertions(+), 12 deletions(-) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -80,13 +80,16 @@ static void xway_reset_chip(struct nand_ - - static void xway_select_chip(struct mtd_info *mtd, int chip) - { -+ static unsigned long csflags; - - switch (chip) { - case -1: - ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); - ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); -+ spin_unlock_irqrestore(&ebu_lock, csflags); - break; - case 0: -+ spin_lock_irqsave(&ebu_lock, csflags); - ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); - ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); - break; -@@ -99,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf - { - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; -- unsigned long flags; - - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) -@@ -109,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf - } - - if (cmd != NAND_CMD_NONE) { -- spin_lock_irqsave(&ebu_lock, flags); - writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd)); - while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) - ; -- spin_unlock_irqrestore(&ebu_lock, flags); - } - } - -@@ -126,12 +126,9 @@ static unsigned char xway_read_byte(stru - { - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; -- unsigned long flags; - int ret; - -- spin_lock_irqsave(&ebu_lock, flags); - ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); -- spin_unlock_irqrestore(&ebu_lock, flags); - - return ret; - } -@@ -140,26 +137,20 @@ static void xway_read_buf(struct mtd_inf - { - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; -- unsigned long flags; - int i; - -- spin_lock_irqsave(&ebu_lock, flags); - for (i = 0; i < len; i++) - buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); -- spin_unlock_irqrestore(&ebu_lock, flags); - } - - static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len) - { - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; -- unsigned long flags; - int i; - -- spin_lock_irqsave(&ebu_lock, flags); - for (i = 0; i < len; i++) - ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA)); -- spin_unlock_irqrestore(&ebu_lock, flags); - } - - static int xway_nand_probe(struct platform_device *pdev) diff --git a/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch deleted file mode 100644 index 31682bc81a..0000000000 --- a/target/linux/lantiq/patches-4.4/0018-MTD-nand-lots-of-xrx200-fixes.patch +++ /dev/null @@ -1,125 +0,0 @@ -From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Tue, 9 Sep 2014 23:12:15 +0200 -Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 63 insertions(+) - ---- a/drivers/mtd/nand/xway_nand.c -+++ b/drivers/mtd/nand/xway_nand.c -@@ -54,8 +54,27 @@ - #define NAND_CON_CSMUX (1 << 1) - #define NAND_CON_NANDM 1 - -+#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr)) -+#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400) -+#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080) -+ - static u32 xway_latchcmd; - -+/* -+ * req_mask provides a mechanism to prevent interference between -+ * nand and pci (probably only relevant for the BT Home Hub 2B). -+ * Setting it causes the corresponding pci req pins to be masked -+ * during nand access, and also moves ebu locking from the read/write -+ * functions to the chip select function to ensure that the whole -+ * operation runs with interrupts disabled. -+ * In addition it switches on some extra waiting in xway_cmd_ctrl(). -+ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled, -+ * which in turn seems to be necessary for the nor chip to be recognised -+ * reliably, on a board (Home Hub 2B again) which has both nor and nand. -+ */ -+ -+static __be32 req_mask = 0; -+ - static void xway_reset_chip(struct nand_chip *chip) - { - unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; -@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_ - case -1: - ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); - ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); -+ -+ if (req_mask) { -+ /* Unmask all external PCI request */ -+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16); -+ } - spin_unlock_irqrestore(&ebu_lock, csflags); -+ - break; - case 0: - spin_lock_irqsave(&ebu_lock, csflags); -+ if (req_mask) { -+ /* Mask all external PCI request */ -+ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16); -+ } -+ - ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); - ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); -+ - break; - default: - BUG(); -@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; - -+ if (req_mask) { -+ if (cmd != NAND_CMD_STATUS) -+ ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */ -+ } -+ -+ - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) - xway_latchcmd = NAND_WRITE_CMD; -@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf - while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) - ; - } -+ -+ if (req_mask) { -+ /* -+ * program and erase have their own busy handlers -+ * status and sequential in needs no delay -+ */ -+ switch (cmd) { -+ case NAND_CMD_ERASE1: -+ case NAND_CMD_SEQIN: -+ case NAND_CMD_STATUS: -+ case NAND_CMD_READID: -+ return; -+ } -+ -+ /* wait until command is processed */ -+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0) -+ ; -+ } - } - - static int xway_dev_ready(struct mtd_info *mtd) -@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo - { - struct nand_chip *this = platform_get_drvdata(pdev); - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; -+ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node, -+ "req-mask", NULL); - const __be32 *cs = of_get_property(pdev->dev.of_node, - "lantiq,cs", NULL); - u32 cs_flag = 0; -@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo - if (cs && (*cs == 1)) - cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; - -+ /* -+ * Load the PCI req lines to mask from the device tree. If the -+ * property is not present, setting req_mask to 0 disables masking. -+ */ -+ req_mask = (req_mask_ptr ? *req_mask_ptr : 0); -+ - /* setup the EBU to run in NAND mode on our base addr */ - ltq_ebu_w32(CPHYSADDR(nandaddr) - | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1); diff --git a/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch deleted file mode 100644 index 3b38a95027..0000000000 --- a/target/linux/lantiq/patches-4.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch +++ /dev/null @@ -1,25 +0,0 @@ -From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:18:00 +0200 -Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/maps/lantiq-flash.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/maps/lantiq-flash.c -+++ b/drivers/mtd/maps/lantiq-flash.c -@@ -138,7 +138,11 @@ ltq_mtd_probe(struct platform_device *pd - if (!ltq_mtd->map) - return -ENOMEM; - -- ltq_mtd->map->phys = ltq_mtd->res->start; -+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) -+ ltq_mtd->map->phys = NO_XIP; -+ else -+ ltq_mtd->map->phys = ltq_mtd->res->start; -+ ltq_mtd->res->start; - ltq_mtd->map->size = resource_size(ltq_mtd->res); - ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); - if (IS_ERR(ltq_mtd->map->virt)) diff --git a/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch deleted file mode 100644 index 57ef32d445..0000000000 --- a/target/linux/lantiq/patches-4.4/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Wed, 10 Sep 2014 22:40:18 +0200 -Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF - -In accordance with the physmap flash we should honour the linux,mtd-name -property when deciding what name the mtd device has. - -Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/mtd/devices/m25p80.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/mtd/devices/m25p80.c -+++ b/drivers/mtd/devices/m25p80.c -@@ -19,6 +19,7 @@ - #include <linux/errno.h> - #include <linux/module.h> - #include <linux/device.h> -+#include <linux/of.h> - - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -@@ -204,6 +205,10 @@ static int m25p_probe(struct spi_device - enum read_mode mode = SPI_NOR_NORMAL; - char *flash_name = NULL; - int ret; -+ const char __maybe_unused *of_mtd_name = NULL; -+ -+ of_property_read_string(spi->dev.of_node, -+ "linux,mtd-name", &of_mtd_name); - - data = dev_get_platdata(&spi->dev); - -@@ -234,6 +239,8 @@ static int m25p_probe(struct spi_device - - if (data && data->name) - nor->mtd.name = data->name; -+ else if (of_mtd_name) -+ nor->mtd.name = of_mtd_name; - - /* For some (historical?) reason many platforms provide two different - * names in flash_platform_data: "name" and "type". Quite often name is diff --git a/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch deleted file mode 100644 index b69b2a900f..0000000000 --- a/target/linux/lantiq/patches-4.4/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch +++ /dev/null @@ -1,364 +0,0 @@ -From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 22 Oct 2012 09:26:24 +0200 -Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - firmware/Makefile | 4 + - firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++ - firmware/lantiq/README | 45 ++++++++ - 3 files changed, 335 insertions(+) - create mode 100644 firmware/lantiq/COPYING - create mode 100644 firmware/lantiq/README - ---- a/firmware/Makefile -+++ b/firmware/Makefile -@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P - fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw - fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw - fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin -+fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin - fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin - - fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) ---- /dev/null -+++ b/firmware/lantiq/COPYING -@@ -0,0 +1,286 @@ -+All firmware files are copyrighted by Lantiq Deutschland GmbH. -+The files have been extracted from header files found in Lantiq BSPs. -+If not stated otherwise all files are licensed under GPL. -+ -+======================================================================= -+ -+ GNU GENERAL PUBLIC LICENSE -+ Version 2, June 1991 -+ -+ Copyright (C) 1989, 1991 Free Software Foundation, Inc. -+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ Everyone is permitted to copy and distribute verbatim copies -+ of this license document, but changing it is not allowed. -+ -+ Preamble -+ -+ The licenses for most software are designed to take away your -+freedom to share and change it. By contrast, the GNU General Public -+License is intended to guarantee your freedom to share and change free -+software--to make sure the software is free for all its users. This -+General Public License applies to most of the Free Software -+Foundation's software and to any other program whose authors commit to -+using it. (Some other Free Software Foundation software is covered by -+the GNU Library General Public License instead.) You can apply it to -+your programs, too. -+ -+ When we speak of free software, we are referring to freedom, not -+price. Our General Public Licenses are designed to make sure that you -+have the freedom to distribute copies of free software (and charge for -+this service if you wish), that you receive source code or can get it -+if you want it, that you can change the software or use pieces of it -+in new free programs; and that you know you can do these things. -+ -+ To protect your rights, we need to make restrictions that forbid -+anyone to deny you these rights or to ask you to surrender the rights. -+These restrictions translate to certain responsibilities for you if you -+distribute copies of the software, or if you modify it. -+ -+ For example, if you distribute copies of such a program, whether -+gratis or for a fee, you must give the recipients all the rights that -+you have. You must make sure that they, too, receive or can get the -+source code. And you must show them these terms so they know their -+rights. -+ -+ We protect your rights with two steps: (1) copyright the software, and -+(2) offer you this license which gives you legal permission to copy, -+distribute and/or modify the software. -+ -+ Also, for each author's protection and ours, we want to make certain -+that everyone understands that there is no warranty for this free -+software. If the software is modified by someone else and passed on, we -+want its recipients to know that what they have is not the original, so -+that any problems introduced by others will not reflect on the original -+authors' reputations. -+ -+ Finally, any free program is threatened constantly by software -+patents. We wish to avoid the danger that redistributors of a free -+program will individually obtain patent licenses, in effect making the -+program proprietary. To prevent this, we have made it clear that any -+patent must be licensed for everyone's free use or not licensed at all. -+ -+ The precise terms and conditions for copying, distribution and -+modification follow. -+ -+ GNU GENERAL PUBLIC LICENSE -+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION -+ -+ 0. This License applies to any program or other work which contains -+a notice placed by the copyright holder saying it may be distributed -+under the terms of this General Public License. The "Program", below, -+refers to any such program or work, and a "work based on the Program" -+means either the Program or any derivative work under copyright law: -+that is to say, a work containing the Program or a portion of it, -+either verbatim or with modifications and/or translated into another -+language. (Hereinafter, translation is included without limitation in -+the term "modification".) Each licensee is addressed as "you". -+ -+Activities other than copying, distribution and modification are not -+covered by this License; they are outside its scope. The act of -+running the Program is not restricted, and the output from the Program -+is covered only if its contents constitute a work based on the -+Program (independent of having been made by running the Program). -+Whether that is true depends on what the Program does. -+ -+ 1. You may copy and distribute verbatim copies of the Program's -+source code as you receive it, in any medium, provided that you -+conspicuously and appropriately publish on each copy an appropriate -+copyright notice and disclaimer of warranty; keep intact all the -+notices that refer to this License and to the absence of any warranty; -+and give any other recipients of the Program a copy of this License -+along with the Program. -+ -+You may charge a fee for the physical act of transferring a copy, and -+you may at your option offer warranty protection in exchange for a fee. -+ -+ 2. You may modify your copy or copies of the Program or any portion -+of it, thus forming a work based on the Program, and copy and -+distribute such modifications or work under the terms of Section 1 -+above, provided that you also meet all of these conditions: -+ -+ a) You must cause the modified files to carry prominent notices -+ stating that you changed the files and the date of any change. -+ -+ b) You must cause any work that you distribute or publish, that in -+ whole or in part contains or is derived from the Program or any -+ part thereof, to be licensed as a whole at no charge to all third -+ parties under the terms of this License. -+ -+ c) If the modified program normally reads commands interactively -+ when run, you must cause it, when started running for such -+ interactive use in the most ordinary way, to print or display an -+ announcement including an appropriate copyright notice and a -+ notice that there is no warranty (or else, saying that you provide -+ a warranty) and that users may redistribute the program under -+ these conditions, and telling the user how to view a copy of this -+ License. (Exception: if the Program itself is interactive but -+ does not normally print such an announcement, your work based on -+ the Program is not required to print an announcement.) -+ -+These requirements apply to the modified work as a whole. If -+identifiable sections of that work are not derived from the Program, -+and can be reasonably considered independent and separate works in -+themselves, then this License, and its terms, do not apply to those -+sections when you distribute them as separate works. But when you -+distribute the same sections as part of a whole which is a work based -+on the Program, the distribution of the whole must be on the terms of -+this License, whose permissions for other licensees extend to the -+entire whole, and thus to each and every part regardless of who wrote it. -+ -+Thus, it is not the intent of this section to claim rights or contest -+your rights to work written entirely by you; rather, the intent is to -+exercise the right to control the distribution of derivative or -+collective works based on the Program. -+ -+In addition, mere aggregation of another work not based on the Program -+with the Program (or with a work based on the Program) on a volume of -+a storage or distribution medium does not bring the other work under -+the scope of this License. -+ -+ 3. You may copy and distribute the Program (or a work based on it, -+under Section 2) in object code or executable form under the terms of -+Sections 1 and 2 above provided that you also do one of the following: -+ -+ a) Accompany it with the complete corresponding machine-readable -+ source code, which must be distributed under the terms of Sections -+ 1 and 2 above on a medium customarily used for software interchange; or, -+ -+ b) Accompany it with a written offer, valid for at least three -+ years, to give any third party, for a charge no more than your -+ cost of physically performing source distribution, a complete -+ machine-readable copy of the corresponding source code, to be -+ distributed under the terms of Sections 1 and 2 above on a medium -+ customarily used for software interchange; or, -+ -+ c) Accompany it with the information you received as to the offer -+ to distribute corresponding source code. (This alternative is -+ allowed only for noncommercial distribution and only if you -+ received the program in object code or executable form with such -+ an offer, in accord with Subsection b above.) -+ -+The source code for a work means the preferred form of the work for -+making modifications to it. For an executable work, complete source -+code means all the source code for all modules it contains, plus any -+associated interface definition files, plus the scripts used to -+control compilation and installation of the executable. However, as a -+special exception, the source code distributed need not include -+anything that is normally distributed (in either source or binary -+form) with the major components (compiler, kernel, and so on) of the -+operating system on which the executable runs, unless that component -+itself accompanies the executable. -+ -+If distribution of executable or object code is made by offering -+access to copy from a designated place, then offering equivalent -+access to copy the source code from the same place counts as -+distribution of the source code, even though third parties are not -+compelled to copy the source along with the object code. -+ -+ 4. You may not copy, modify, sublicense, or distribute the Program -+except as expressly provided under this License. Any attempt -+otherwise to copy, modify, sublicense or distribute the Program is -+void, and will automatically terminate your rights under this License. -+However, parties who have received copies, or rights, from you under -+this License will not have their licenses terminated so long as such -+parties remain in full compliance. -+ -+ 5. You are not required to accept this License, since you have not -+signed it. However, nothing else grants you permission to modify or -+distribute the Program or its derivative works. These actions are -+prohibited by law if you do not accept this License. Therefore, by -+modifying or distributing the Program (or any work based on the -+Program), you indicate your acceptance of this License to do so, and -+all its terms and conditions for copying, distributing or modifying -+the Program or works based on it. -+ -+ 6. Each time you redistribute the Program (or any work based on the -+Program), the recipient automatically receives a license from the -+original licensor to copy, distribute or modify the Program subject to -+these terms and conditions. You may not impose any further -+restrictions on the recipients' exercise of the rights granted herein. -+You are not responsible for enforcing compliance by third parties to -+this License. -+ -+ 7. If, as a consequence of a court judgment or allegation of patent -+infringement or for any other reason (not limited to patent issues), -+conditions are imposed on you (whether by court order, agreement or -+otherwise) that contradict the conditions of this License, they do not -+excuse you from the conditions of this License. If you cannot -+distribute so as to satisfy simultaneously your obligations under this -+License and any other pertinent obligations, then as a consequence you -+may not distribute the Program at all. For example, if a patent -+license would not permit royalty-free redistribution of the Program by -+all those who receive copies directly or indirectly through you, then -+the only way you could satisfy both it and this License would be to -+refrain entirely from distribution of the Program. -+ -+If any portion of this section is held invalid or unenforceable under -+any particular circumstance, the balance of the section is intended to -+apply and the section as a whole is intended to apply in other -+circumstances. -+ -+It is not the purpose of this section to induce you to infringe any -+patents or other property right claims or to contest validity of any -+such claims; this section has the sole purpose of protecting the -+integrity of the free software distribution system, which is -+implemented by public license practices. Many people have made -+generous contributions to the wide range of software distributed -+through that system in reliance on consistent application of that -+system; it is up to the author/donor to decide if he or she is willing -+to distribute software through any other system and a licensee cannot -+impose that choice. -+ -+This section is intended to make thoroughly clear what is believed to -+be a consequence of the rest of this License. -+ -+ 8. If the distribution and/or use of the Program is restricted in -+certain countries either by patents or by copyrighted interfaces, the -+original copyright holder who places the Program under this License -+may add an explicit geographical distribution limitation excluding -+those countries, so that distribution is permitted only in or among -+countries not thus excluded. In such case, this License incorporates -+the limitation as if written in the body of this License. -+ -+ 9. The Free Software Foundation may publish revised and/or new versions -+of the General Public License from time to time. Such new versions will -+be similar in spirit to the present version, but may differ in detail to -+address new problems or concerns. -+ -+Each version is given a distinguishing version number. If the Program -+specifies a version number of this License which applies to it and "any -+later version", you have the option of following the terms and conditions -+either of that version or of any later version published by the Free -+Software Foundation. If the Program does not specify a version number of -+this License, you may choose any version ever published by the Free Software -+Foundation. -+ -+ 10. If you wish to incorporate parts of the Program into other free -+programs whose distribution conditions are different, write to the author -+to ask for permission. For software which is copyrighted by the Free -+Software Foundation, write to the Free Software Foundation; we sometimes -+make exceptions for this. Our decision will be guided by the two goals -+of preserving the free status of all derivatives of our free software and -+of promoting the sharing and reuse of software generally. -+ -+ NO WARRANTY -+ -+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -+REPAIR OR CORRECTION. -+ -+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -+POSSIBILITY OF SUCH DAMAGES. -+ -+ END OF TERMS AND CONDITIONS ---- /dev/null -+++ b/firmware/lantiq/README -@@ -0,0 +1,45 @@ -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+# (C) Copyright 2007 - 2012 -+# Lantiq Deutschland GmbH -+# -+# (C) Copyright 2012 -+# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> -+# -+ -+# -+# How to use -+# -+Configure kernel with: -+CONFIG_FW_LOADER=y -+CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR" -+CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES" -+ -+where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list -+of space separated files from list below. -+ -+# -+# Firmware files -+# -+ -+# GPHY core on Lantiq XWAY VR9 v1.1 -+lantiq/vr9_phy11g_a1x.bin -+lantiq/vr9_phy22f_a1x.bin -+ -+# GPHY core on Lantiq XWAY VR9 v1.2 -+lantiq/vr9_phy11g_a2x.bin -+lantiq/vr9_phy22f_a2x.bin diff --git a/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch deleted file mode 100644 index ccb0733f75..0000000000 --- a/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch +++ /dev/null @@ -1,3396 +0,0 @@ -From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 22 Oct 2012 12:22:23 +0200 -Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net - ---- - drivers/net/ethernet/Kconfig | 8 +- - drivers/net/ethernet/Makefile | 1 + - drivers/net/ethernet/lantiq_pce.h | 163 +++ - drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++ - drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++ - 5 files changed, 3297 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/ethernet/lantiq_pce.h - create mode 100644 drivers/net/ethernet/lantiq_xrx200.c - create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h - ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -103,7 +103,13 @@ config LANTIQ_ETOP - tristate "Lantiq SoC ETOP driver" - depends on SOC_TYPE_XWAY - ---help--- -- Support for the MII0 inside the Lantiq SoC -+ Support for the MII0 inside the Lantiq ADSL SoC -+ -+config LANTIQ_XRX200 -+ tristate "Lantiq SoC XRX200 driver" -+ depends on SOC_TYPE_XWAY -+ ---help--- -+ Support for the MII0 inside the Lantiq VDSL SoC - - source "drivers/net/ethernet/marvell/Kconfig" - source "drivers/net/ethernet/mellanox/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal - obj-$(CONFIG_JME) += jme.o - obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o -+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o - obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ - obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ - obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_pce.h -@@ -0,0 +1,163 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ * -+ * PCE microcode extracted from UGW5.2 switch api -+ */ -+ -+/* Switch API Micro Code V0.3 */ -+enum { -+ OUT_MAC0 = 0, -+ OUT_MAC1, -+ OUT_MAC2, -+ OUT_MAC3, -+ OUT_MAC4, -+ OUT_MAC5, -+ OUT_ETHTYP, -+ OUT_VTAG0, -+ OUT_VTAG1, -+ OUT_ITAG0, -+ OUT_ITAG1, /*10 */ -+ OUT_ITAG2, -+ OUT_ITAG3, -+ OUT_IP0, -+ OUT_IP1, -+ OUT_IP2, -+ OUT_IP3, -+ OUT_SIP0, -+ OUT_SIP1, -+ OUT_SIP2, -+ OUT_SIP3, /*20*/ -+ OUT_SIP4, -+ OUT_SIP5, -+ OUT_SIP6, -+ OUT_SIP7, -+ OUT_DIP0, -+ OUT_DIP1, -+ OUT_DIP2, -+ OUT_DIP3, -+ OUT_DIP4, -+ OUT_DIP5, /*30*/ -+ OUT_DIP6, -+ OUT_DIP7, -+ OUT_SESID, -+ OUT_PROT, -+ OUT_APP0, -+ OUT_APP1, -+ OUT_IGMP0, -+ OUT_IGMP1, -+ OUT_IPOFF, /*39*/ -+ OUT_NONE = 63 -+}; -+ -+/* parser's microcode length type */ -+#define INSTR 0 -+#define IPV6 1 -+#define LENACCU 2 -+ -+/* parser's microcode flag type */ -+enum { -+ FLAG_ITAG = 0, -+ FLAG_VLAN, -+ FLAG_SNAP, -+ FLAG_PPPOE, -+ FLAG_IPV6, -+ FLAG_IPV6FL, -+ FLAG_IPV4, -+ FLAG_IGMP, -+ FLAG_TU, -+ FLAG_HOP, -+ FLAG_NN1, /*10 */ -+ FLAG_NN2, -+ FLAG_END, -+ FLAG_NO, /*13*/ -+}; -+ -+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ -+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ -+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} -+struct pce_microcode { -+ unsigned short val[4]; -+/* unsigned short val_2; -+ unsigned short val_1; -+ unsigned short val_0;*/ -+} pce_microcode[] = { -+ /* value mask ns fields L type flags ipv4_len */ -+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), -+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), -+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), -+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+}; ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -0,0 +1,1853 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/switch.h> -+#include <linux/etherdevice.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/interrupt.h> -+#include <linux/clk.h> -+#include <linux/if_vlan.h> -+#include <asm/delay.h> -+ -+#include <linux/of_net.h> -+#include <linux/of_mdio.h> -+#include <linux/of_gpio.h> -+ -+#include <xway_dma.h> -+#include <lantiq_soc.h> -+ -+#include "lantiq_pce.h" -+#include "lantiq_xrx200_sw.h" -+ -+#define SW_POLLING -+#define SW_ROUTING -+ -+#ifdef SW_ROUTING -+#define XRX200_MAX_DEV 2 -+#else -+#define XRX200_MAX_DEV 1 -+#endif -+ -+#define XRX200_MAX_VLAN 64 -+#define XRX200_PCE_ACTVLAN_IDX 0x01 -+#define XRX200_PCE_VLANMAP_IDX 0x02 -+ -+#define XRX200_MAX_PORT 7 -+#define XRX200_MAX_DMA 8 -+ -+#define XRX200_HEADROOM 4 -+ -+#define XRX200_TX_TIMEOUT (10 * HZ) -+ -+/* port type */ -+#define XRX200_PORT_TYPE_PHY 1 -+#define XRX200_PORT_TYPE_MAC 2 -+ -+/* DMA */ -+#define XRX200_DMA_DATA_LEN 0x600 -+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 -+#define XRX200_DMA_RX 0 -+#define XRX200_DMA_TX 1 -+#define XRX200_DMA_TX_2 3 -+#define XRX200_DMA_IS_TX(x) (x%2) -+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x)) -+ -+/* fetch / store dma */ -+#define FDMA_PCTRL0 0x2A00 -+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) -+#define SDMA_PCTRL0 0x2F00 -+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) -+ -+/* buffer management */ -+#define BM_PCFG0 0x200 -+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) -+ -+/* MDIO */ -+#define MDIO_GLOB 0x0000 -+#define MDIO_CTRL 0x0020 -+#define MDIO_READ 0x0024 -+#define MDIO_WRITE 0x0028 -+#define MDIO_PHY0 0x0054 -+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) -+#define MDIO_CLK_CFG0 0x002C -+#define MDIO_CLK_CFG1 0x0030 -+ -+#define MDIO_GLOB_ENABLE 0x8000 -+#define MDIO_BUSY BIT(12) -+#define MDIO_RD BIT(11) -+#define MDIO_WR BIT(10) -+#define MDIO_MASK 0x1f -+#define MDIO_ADDRSHIFT 5 -+#define MDIO1_25MHZ 9 -+ -+#define MDIO_PHY_LINK_DOWN 0x4000 -+#define MDIO_PHY_LINK_UP 0x2000 -+ -+#define MDIO_PHY_SPEED_M10 0x0000 -+#define MDIO_PHY_SPEED_M100 0x0800 -+#define MDIO_PHY_SPEED_G1 0x1000 -+ -+#define MDIO_PHY_FDUP_EN 0x0200 -+#define MDIO_PHY_FDUP_DIS 0x0600 -+ -+#define MDIO_PHY_LINK_MASK 0x6000 -+#define MDIO_PHY_SPEED_MASK 0x1800 -+#define MDIO_PHY_FDUP_MASK 0x0600 -+#define MDIO_PHY_ADDR_MASK 0x001f -+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ -+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK -+ -+/* MII */ -+#define MII_CFG(p) (p * 8) -+ -+#define MII_CFG_EN BIT(14) -+ -+#define MII_CFG_MODE_MIIP 0x0 -+#define MII_CFG_MODE_MIIM 0x1 -+#define MII_CFG_MODE_RMIIP 0x2 -+#define MII_CFG_MODE_RMIIM 0x3 -+#define MII_CFG_MODE_RGMII 0x4 -+#define MII_CFG_MODE_MASK 0xf -+ -+#define MII_CFG_RATE_M2P5 0x00 -+#define MII_CFG_RATE_M25 0x10 -+#define MII_CFG_RATE_M125 0x20 -+#define MII_CFG_RATE_M50 0x30 -+#define MII_CFG_RATE_AUTO 0x40 -+#define MII_CFG_RATE_MASK 0x70 -+ -+/* cpu port mac */ -+#define PMAC_HD_CTL 0x0000 -+#define PMAC_RX_IPG 0x0024 -+#define PMAC_EWAN 0x002c -+ -+#define PMAC_IPG_MASK 0xf -+#define PMAC_HD_CTL_AS 0x0008 -+#define PMAC_HD_CTL_AC 0x0004 -+#define PMAC_HD_CTL_RC 0x0010 -+#define PMAC_HD_CTL_RXSH 0x0040 -+#define PMAC_HD_CTL_AST 0x0080 -+#define PMAC_HD_CTL_RST 0x0100 -+ -+/* PCE */ -+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) -+#define PCE_TBL_MASK 0x1120 -+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) -+#define PCE_TBL_ADDR 0x1138 -+#define PCE_TBL_CTRL 0x113c -+#define PCE_PMAP1 0x114c -+#define PCE_PMAP2 0x1150 -+#define PCE_PMAP3 0x1154 -+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) -+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) -+ -+#define PCE_TBL_BUSY BIT(15) -+#define PCE_TBL_CFG_ADDR_MASK 0x1f -+#define PCE_TBL_CFG_ADWR 0x20 -+#define PCE_TBL_CFG_ADWR_MASK 0x60 -+#define PCE_INGRESS BIT(11) -+ -+/* MAC */ -+#define MAC_FLEN_REG (0x2314) -+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) -+ -+/* buffer management */ -+#define BM_PCFG(p) (0x200 + (p * 8)) -+ -+/* special tag in TX path header */ -+#define SPID_SHIFT 24 -+#define DPID_SHIFT 16 -+#define DPID_ENABLE 1 -+#define SPID_CPU_PORT 2 -+#define PORT_MAP_SEL BIT(15) -+#define PORT_MAP_EN BIT(14) -+#define PORT_MAP_SHIFT 1 -+#define PORT_MAP_MASK 0x3f -+ -+#define SPPID_MASK 0x7 -+#define SPPID_SHIFT 4 -+ -+/* MII regs not yet in linux */ -+#define MDIO_DEVAD_NONE (-1) -+#define ADVERTIZE_MPD (1 << 10) -+ -+struct xrx200_port { -+ u8 num; -+ u8 phy_addr; -+ u16 flags; -+ phy_interface_t phy_if; -+ -+ int link; -+ int gpio; -+ enum of_gpio_flags gpio_flags; -+ -+ struct phy_device *phydev; -+ struct device_node *phy_node; -+}; -+ -+struct xrx200_chan { -+ int idx; -+ int refcount; -+ int tx_free; -+ -+ struct net_device dummy_dev; -+ struct net_device *devs[XRX200_MAX_DEV]; -+ -+ struct tasklet_struct tasklet; -+ struct napi_struct napi; -+ struct ltq_dma_channel dma; -+ struct sk_buff *skb[LTQ_DESC_NUM]; -+ -+ spinlock_t lock; -+}; -+ -+struct xrx200_hw { -+ struct clk *clk; -+ struct mii_bus *mii_bus; -+ -+ struct xrx200_chan chan[XRX200_MAX_DMA]; -+ u16 vlan_vid[XRX200_MAX_VLAN]; -+ u16 vlan_port_map[XRX200_MAX_VLAN]; -+ -+ struct net_device *devs[XRX200_MAX_DEV]; -+ int num_devs; -+ -+ int port_map[XRX200_MAX_PORT]; -+ unsigned short wan_map; -+ -+ struct switch_dev swdev; -+}; -+ -+struct xrx200_priv { -+ struct net_device_stats stats; -+ int id; -+ -+ struct xrx200_port port[XRX200_MAX_PORT]; -+ int num_port; -+ bool wan; -+ bool sw; -+ unsigned short port_map; -+ unsigned char mac[6]; -+ -+ struct xrx200_hw *hw; -+}; -+ -+static __iomem void *xrx200_switch_membase; -+static __iomem void *xrx200_mii_membase; -+static __iomem void *xrx200_mdio_membase; -+static __iomem void *xrx200_pmac_membase; -+ -+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) -+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) -+#define ltq_switch_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) -+ -+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) -+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) -+#define ltq_mdio_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) -+ -+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) -+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) -+#define ltq_mii_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) -+ -+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) -+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) -+#define ltq_pmac_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) -+ -+#define XRX200_GLOBAL_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_global_attr, \ -+ .get = xrx200_get_global_attr -+ -+#define XRX200_PORT_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_port_attr, \ -+ .get = xrx200_get_port_attr -+ -+static int xrx200sw_read_x(int reg, int x) -+{ -+ int value, mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ value = ltq_switch_r32(addr); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ value = (value >> xrx200sw_reg[reg].shift); -+ -+ return (value & mask); -+} -+ -+static int xrx200sw_read(int reg) -+{ -+ return xrx200sw_read_x(reg, 0); -+} -+ -+static void xrx200sw_write_x(int value, int reg, int x) -+{ -+ int mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ mask = (mask << xrx200sw_reg[reg].shift); -+ value = (value << xrx200sw_reg[reg].shift) & mask; -+ -+ ltq_switch_w32_mask(mask, value, addr); -+} -+ -+static void xrx200sw_write(int value, int reg) -+{ -+ xrx200sw_write_x(value, reg, 0); -+} -+ -+struct xrx200_pce_table_entry { -+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index -+ int table; // PCE_TBL_CTRL.ADDR = pData->table -+ unsigned short key[8]; -+ unsigned short val[5]; -+ unsigned short mask; -+ unsigned short type; -+ unsigned short valid; -+ unsigned short gmap; -+}; -+ -+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based read) -+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // read the keys -+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7); -+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6); -+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5); -+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4); -+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3); -+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2); -+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1); -+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4); -+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3); -+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2); -+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1); -+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0); -+ // read the type -+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP); -+ -+ return 0; -+} -+ -+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based write) -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ // read the keys -+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7); -+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6); -+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5); -+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4); -+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3); -+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2); -+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1); -+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4); -+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3); -+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2); -+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1); -+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0); -+ // read the type -+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP); -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ return 0; -+} -+ -+static void xrx200sw_fixup_pvids(void) -+{ -+ int index, p, portmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ struct xrx200_pce_table_entry tev; -+ -+ portmap = 0; -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ portmap |= BIT(p); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (index = XRX200_MAX_VLAN; index-- > 0;) -+ { -+ tev.index = index; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.valid == 0) -+ continue; -+ -+ tem.index = index; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ untagged = portmap & (tem.val[1] ^ tem.val[2]); -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (untagged & BIT(p)) -+ { -+ portmap &= ~BIT(p); -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (portmap & BIT(p)) -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+} -+ -+// swconfig interface -+static void xrx200_hw_init(struct xrx200_hw *hw); -+ -+// global -+static int xrx200sw_reset_switch(struct switch_dev *dev) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ xrx200_hw_init(hw); -+ -+ return 0; -+} -+ -+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ int p; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) { -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p); -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p); -+ } -+ -+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN); -+ return 0; -+} -+ -+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write(val->value.i, attr->id); -+ return 0; -+} -+ -+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+// vlan -+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i; -+ struct xrx200_pce_table_entry tev; -+ struct xrx200_pce_table_entry tem; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tev.index = i; -+ xrx200_pce_table_entry_read(&tev); -+ if (tev.key[0] == val->value.i && i != val->port_vlan) -+ return -EINVAL; -+ } -+ -+ hw->vlan_vid[val->port_vlan] = val->value.i; -+ -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ tev.key[0] = val->value.i; -+ tev.valid = val->value.i > 0; -+ xrx200_pce_table_entry_write(&tev); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ tem.val[0] = val->value.i; -+ xrx200_pce_table_entry_write(&tem); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry te; -+ -+ te.table = XRX200_PCE_ACTVLAN_IDX; -+ te.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&te); -+ val->value.i = te.key[0]; -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i, portmap, tagmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ -+ portmap = 0; -+ tagmap = 0; -+ for (i = 0; i < val->len; i++) -+ { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ portmap |= (1 << p->id); -+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) -+ tagmap |= (1 << p->id); -+ } -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ -+ untagged = portmap ^ tagmap; -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tem.index = i; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i)) -+ return -EINVAL; -+ } -+ -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ // auto-enable this vlan if not enabled already -+ if (tem.val[0] == 0) -+ { -+ struct switch_val v; -+ v.port_vlan = val->port_vlan; -+ v.value.i = val->port_vlan; -+ if(xrx200sw_set_vlan_vid(dev, NULL, &v)) -+ return -EINVAL; -+ -+ //read updated tem -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ } -+ -+ tem.val[1] = portmap; -+ tem.val[2] = tagmap; -+ xrx200_pce_table_entry_write(&tem); -+ -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2); -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3); -+ hw->vlan_port_map[val->port_vlan] = portmap; -+ -+ xrx200sw_fixup_pvids(); -+ -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ int i; -+ unsigned short ports, tags; -+ struct xrx200_pce_table_entry tem; -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ ports = tem.val[1]; -+ tags = tem.val[2]; -+ -+ for (i = 0; i < XRX200_MAX_PORT; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & (1 << i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if (tags & (1 << i)) -+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.key[0] == 0) -+ return -EINVAL; -+ -+ tev.valid = val->value.i; -+ xrx200_pce_table_entry_write(&tev); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ val->value.i = tev.valid; -+ -+ return 0; -+} -+ -+// port -+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port); -+ xrx200_pce_table_entry_read(&tev); -+ -+ *val = tev.key[0]; -+ return 0; -+} -+ -+static int xrx200sw_get_port_link(struct switch_dev *dev, -+ int port, -+ struct switch_port_link *link) -+{ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port); -+ if (!link->link) -+ return 0; -+ -+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port); -+ -+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010); -+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020); -+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port)); -+ -+ link->speed = SWITCH_PORT_SPEED_10; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_100; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_1000; -+ -+ return 0; -+} -+ -+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan); -+ return 0; -+} -+ -+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan); -+ return 0; -+} -+ -+// attributes -+static struct switch_attr xrx200sw_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .set = xrx200_set_vlan_mode_enable, -+ .get = xrx200_get_vlan_mode_enable, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .max = 1}, -+}; -+ -+static struct switch_attr xrx200sw_port[] = { -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR), -+ .name = "uvr", -+ .description = "Unknown VLAN Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR), -+ .name = "vsr", -+ .description = "VLAN Security Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR), -+ .name = "vinr", -+ .description = "VLAN Ingress Tag Rule", -+ .max = 2, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM), -+ .name = "tvm", -+ .description = "Transparent VLAN Mode", -+ .max = 1, -+ }, -+}; -+ -+static struct switch_attr xrx200sw_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = xrx200sw_set_vlan_vid, -+ .get = xrx200sw_get_vlan_vid, -+ .max = 4094, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable", -+ .description = "Enable VLAN", -+ .set = xrx200sw_set_vlan_enable, -+ .get = xrx200sw_get_vlan_enable, -+ .max = 1, -+ }, -+}; -+ -+static const struct switch_dev_ops xrx200sw_ops = { -+ .attr_global = { -+ .attr = xrx200sw_globals, -+ .n_attr = ARRAY_SIZE(xrx200sw_globals), -+ }, -+ .attr_port = { -+ .attr = xrx200sw_port, -+ .n_attr = ARRAY_SIZE(xrx200sw_port), -+ }, -+ .attr_vlan = { -+ .attr = xrx200sw_vlan, -+ .n_attr = ARRAY_SIZE(xrx200sw_vlan), -+ }, -+ .get_vlan_ports = xrx200sw_get_vlan_ports, -+ .set_vlan_ports = xrx200sw_set_vlan_ports, -+ .get_port_pvid = xrx200sw_get_port_pvid, -+ .reset_switch = xrx200sw_reset_switch, -+ .get_port_link = xrx200sw_get_port_link, -+// .get_port_stats = xrx200sw_get_port_stats, //TODO -+}; -+ -+static int xrx200sw_init(struct xrx200_hw *hw) -+{ -+ int netdev_num; -+ -+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++) -+ { -+ struct switch_dev *swdev; -+ struct net_device *dev = hw->devs[netdev_num]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ if (!priv->sw) -+ continue; -+ -+ swdev = &hw->swdev; -+ -+ swdev->name = "Lantiq XRX200 Switch"; -+ swdev->vlans = XRX200_MAX_VLAN; -+ swdev->ports = XRX200_MAX_PORT; -+ swdev->cpu_port = 6; -+ swdev->ops = &xrx200sw_ops; -+ -+ register_switch(swdev, dev); -+ return 0; // enough switches -+ } -+ return 0; -+} -+ -+static int xrx200_open(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_enable(&priv->hw->chan[i].napi); -+ ltq_dma_open(&priv->hw->chan[i].dma); -+ } -+ priv->hw->chan[i].refcount++; -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_start(priv->port[i].phydev); -+ netif_wake_queue(dev); -+ -+ return 0; -+} -+ -+static int xrx200_close(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ netif_stop_queue(dev); -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_stop(priv->port[i].phydev); -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ -+ priv->hw->chan[i].refcount--; -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_disable(&priv->hw->chan[i].napi); -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ } -+ -+ return 0; -+} -+ -+static int xrx200_alloc_skb(struct xrx200_chan *ch) -+{ -+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) -+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); -+ if (!ch->skb[ch->dma.desc]) -+ goto skip; -+ -+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); -+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, -+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, -+ DMA_FROM_DEVICE); -+ ch->dma.desc_base[ch->dma.desc].addr = -+ CPHYSADDR(ch->skb[ch->dma.desc]->data); -+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); -+ -+skip: -+ ch->dma.desc_base[ch->dma.desc].ctl = -+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | -+ XRX200_DMA_DATA_LEN; -+ -+ return 0; -+} -+ -+static void xrx200_hw_receive(struct xrx200_chan *ch, int id) -+{ -+ struct net_device *dev = ch->devs[id]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK); -+ int ret; -+ -+ ret = xrx200_alloc_skb(ch); -+ -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ -+ if (ret) { -+ netdev_err(dev, -+ "failed to allocate new rx buffer\n"); -+ return; -+ } -+ -+ skb_put(skb, len); -+#ifdef SW_ROUTING -+ skb_pull(skb, 8); -+#endif -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_receive_skb(skb); -+ priv->stats.rx_packets++; -+ priv->stats.rx_bytes+=len; -+} -+ -+static int xrx200_poll_rx(struct napi_struct *napi, int budget) -+{ -+ struct xrx200_chan *ch = container_of(napi, -+ struct xrx200_chan, napi); -+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); -+ int rx = 0; -+ int complete = 0; -+ -+ while ((rx < budget) && !complete) { -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+#ifdef SW_ROUTING -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ u8 *special_tag = (u8*)skb->data; -+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK; -+ xrx200_hw_receive(ch, priv->hw->port_map[port]); -+#else -+ xrx200_hw_receive(ch, 0); -+#endif -+ rx++; -+ } else { -+ complete = 1; -+ } -+ } -+ -+ if (complete || !rx) { -+ napi_complete(&ch->napi); -+ ltq_dma_enable_irq(&ch->dma); -+ } -+ -+ return rx; -+} -+ -+static void xrx200_tx_housekeeping(unsigned long ptr) -+{ -+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr; -+ int pkts = 0; -+ int i; -+ -+ spin_lock_bh(&ch->lock); -+ ltq_dma_ack_irq(&ch->dma); -+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ struct sk_buff *skb = ch->skb[ch->tx_free]; -+ -+ pkts++; -+ ch->skb[ch->tx_free] = NULL; -+ dev_kfree_skb(skb); -+ memset(&ch->dma.desc_base[ch->tx_free], 0, -+ sizeof(struct ltq_dma_desc)); -+ ch->tx_free++; -+ ch->tx_free %= LTQ_DESC_NUM; -+ } -+ ltq_dma_enable_irq(&ch->dma); -+ spin_unlock_bh(&ch->lock); -+ -+ if (!pkts) -+ return; -+ -+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) -+ netif_wake_queue(ch->devs[i]); -+} -+ -+static struct net_device_stats *xrx200_get_stats (struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ return &priv->stats; -+} -+ -+static void xrx200_tx_timeout(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); -+ -+ priv->stats.tx_errors++; -+ netif_wake_queue(dev); -+} -+ -+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct xrx200_chan *ch; -+ struct ltq_dma_desc *desc; -+ u32 byte_offset; -+ int ret = NETDEV_TX_OK; -+ int len; -+#ifdef SW_ROUTING -+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; -+#endif -+ if(priv->id) -+ ch = &priv->hw->chan[XRX200_DMA_TX_2]; -+ else -+ ch = &priv->hw->chan[XRX200_DMA_TX]; -+ -+ desc = &ch->dma.desc_base[ch->dma.desc]; -+ -+ skb->dev = dev; -+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; -+ -+#ifdef SW_ROUTING -+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) { -+ u16 port_map = priv->port_map; -+ -+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) { -+ u16 vid; -+ int i; -+ -+ port_map = 0; -+ if (!__vlan_get_tag(skb, &vid)) { -+ for (i = 0; i < XRX200_MAX_VLAN; i++) { -+ if (priv->hw->vlan_vid[i] != vid) -+ continue; -+ port_map = priv->hw->vlan_port_map[i]; -+ break; -+ } -+ } -+ } -+ -+ special_tag |= (port_map << PORT_MAP_SHIFT) | -+ PORT_MAP_SEL | PORT_MAP_EN; -+ } -+ if(priv->wan) -+ special_tag |= (1 << DPID_SHIFT); -+ if(skb_headroom(skb) < 4) { -+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); -+ dev_kfree_skb_any(skb); -+ skb = tmp; -+ } -+ skb_push(skb, 4); -+ memcpy(skb->data, &special_tag, sizeof(u32)); -+ len += 4; -+#endif -+ -+ /* dma needs to start on a 16 byte aligned address */ -+ byte_offset = CPHYSADDR(skb->data) % 16; -+ -+ spin_lock_bh(&ch->lock); -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -+ netdev_err(dev, "tx ring full\n"); -+ netif_stop_queue(dev); -+ ret = NETDEV_TX_BUSY; -+ goto out; -+ } -+ -+ ch->skb[ch->dma.desc] = skb; -+ -+ dev->trans_start = jiffies; -+ -+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, -+ DMA_TO_DEVICE)) - byte_offset; -+ wmb(); -+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | -+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ if (ch->dma.desc == ch->tx_free) -+ netif_stop_queue(dev); -+ -+ -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes+=len; -+ -+out: -+ spin_unlock_bh(&ch->lock); -+ -+ return ret; -+} -+ -+static irqreturn_t xrx200_dma_irq(int irq, void *priv) -+{ -+ struct xrx200_hw *hw = priv; -+ int chnr = irq - XRX200_DMA_IRQ; -+ struct xrx200_chan *ch = &hw->chan[chnr]; -+ -+ ltq_dma_disable_irq(&ch->dma); -+ ltq_dma_ack_irq(&ch->dma); -+ -+ if (chnr % 2) -+ tasklet_schedule(&ch->tasklet); -+ else -+ napi_schedule(&ch->napi); -+ -+ return IRQ_HANDLED; -+} -+ -+static int xrx200_dma_init(struct xrx200_hw *hw) -+{ -+ int i, err = 0; -+ -+ ltq_dma_init_port(DMA_PORT_ETOP); -+ -+ for (i = 0; i < 8 && !err; i++) { -+ int irq = XRX200_DMA_IRQ + i; -+ struct xrx200_chan *ch = &hw->chan[i]; -+ -+ spin_lock_init(&ch->lock); -+ -+ ch->idx = ch->dma.nr = i; -+ -+ if (i == XRX200_DMA_TX) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); -+ } else if (i == XRX200_DMA_TX_2) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw); -+ } else if (i == XRX200_DMA_RX) { -+ ltq_dma_alloc_rx(&ch->dma); -+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -+ ch->dma.desc++) -+ if (xrx200_alloc_skb(ch)) -+ err = -ENOMEM; -+ ch->dma.desc = 0; -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); -+ } else -+ continue; -+ -+ if (!err) -+ ch->dma.irq = irq; -+ else -+ pr_err("net-xrx200: failed to request irq %d\n", irq); -+ } -+ -+ return err; -+} -+ -+#ifdef SW_POLLING -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK; -+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; -+ u16 miirate = 0; -+ -+ switch (port->phydev->speed) { -+ case SPEED_1000: -+ phyaddr |= MDIO_PHY_SPEED_G1; -+ miirate = MII_CFG_RATE_M125; -+ break; -+ -+ case SPEED_100: -+ phyaddr |= MDIO_PHY_SPEED_M100; -+ switch (miimode) { -+ case MII_CFG_MODE_RMIIM: -+ case MII_CFG_MODE_RMIIP: -+ miirate = MII_CFG_RATE_M50; -+ break; -+ default: -+ miirate = MII_CFG_RATE_M25; -+ break; -+ } -+ break; -+ -+ default: -+ phyaddr |= MDIO_PHY_SPEED_M10; -+ miirate = MII_CFG_RATE_M2P5; -+ break; -+ } -+ -+ if (port->phydev->link) -+ phyaddr |= MDIO_PHY_LINK_UP; -+ else -+ phyaddr |= MDIO_PHY_LINK_DOWN; -+ -+ if (port->phydev->duplex == DUPLEX_FULL) -+ phyaddr |= MDIO_PHY_FDUP_EN; -+ else -+ phyaddr |= MDIO_PHY_FDUP_DIS; -+ -+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); -+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); -+ udelay(1); -+} -+#else -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ -+} -+#endif -+ -+static void xrx200_mdio_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ bool changed = false, link = false; -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].phydev->link) -+ link = true; -+ -+ if (priv->port[i].link != priv->port[i].phydev->link) { -+ changed = true; -+ xrx200_gmac_update(&priv->port[i]); -+ priv->port[i].link = priv->port[i].phydev->link; -+ netdev_info(dev, "port %d %s link\n", -+ priv->port[i].num, -+ (priv->port[i].link)?("got"):("lost")); -+ } -+ } -+ if (changed && !link) -+ netif_carrier_off(dev); -+} -+ -+static inline int xrx200_mdio_poll(struct mii_bus *bus) -+{ -+ unsigned cnt = 10000; -+ -+ while (likely(cnt--)) { -+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); -+ if ((ctrl & MDIO_BUSY) == 0) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return 1; -+ -+ ltq_mdio_w32(val, MDIO_WRITE); -+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ return 0; -+} -+ -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ return ltq_mdio_r32(MDIO_READ); -+} -+ -+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ unsigned val; -+ -+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr]; -+ -+ if (!phydev) { -+ netdev_err(dev, "no PHY found\n"); -+ return -ENODEV; -+ } -+ -+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link, -+ port->phy_if); -+ -+ if (IS_ERR(phydev)) { -+ netdev_err(dev, "Could not attach to PHY\n"); -+ return PTR_ERR(phydev); -+ } -+ -+ phydev->supported &= (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); -+ phydev->advertising = phydev->supported; -+ port->phydev = phydev; -+ phydev->no_auto_carrier_off = true; -+ -+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", -+ dev->name, phydev->drv->name, -+ dev_name(&phydev->dev), phydev->irq); -+ -+#ifdef SW_POLLING -+ phy_read_status(phydev); -+ -+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); -+ val |= ADVERTIZE_MPD; -+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); -+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); -+ -+ phy_start_aneg(phydev); -+#endif -+ return 0; -+} -+ -+static void xrx200_port_config(struct xrx200_priv *priv, -+ const struct xrx200_port *port) -+{ -+ u16 miimode = 0; -+ -+ switch (port->num) { -+ case 0: /* xMII0 */ -+ case 1: /* xMII1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* MII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ else -+ /* MII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_MIIP; -+ break; -+ case PHY_INTERFACE_MODE_RMII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* RMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RMIIM; -+ else -+ /* RMII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_RMIIP; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 2: /* internal GPHY0 */ -+ case 3: /* internal GPHY0 */ -+ case 4: /* internal GPHY1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ case PHY_INTERFACE_MODE_GMII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 5: /* internal GPHY1 or xMII2 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, -+ MII_CFG(port->num)); -+} -+ -+static int xrx200_init(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct sockaddr mac; -+ int err, i; -+ -+#ifndef SW_POLLING -+ unsigned int reg = 0; -+ -+ /* enable auto polling */ -+ for (i = 0; i < priv->num_port; i++) -+ reg |= BIT(priv->port[i].num); -+ ltq_mdio_w32(reg, MDIO_CLK_CFG0); -+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); -+#endif -+ -+ /* setup each port */ -+ for (i = 0; i < priv->num_port; i++) -+ xrx200_port_config(priv, &priv->port[i]); -+ -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ if (!is_valid_ether_addr(mac.sa_data)) { -+ pr_warn("net-xrx200: invalid MAC, using random\n"); -+ eth_random_addr(mac.sa_data); -+ dev->addr_assign_type |= NET_ADDR_RANDOM; -+ } -+ -+ err = eth_mac_addr(dev, &mac); -+ if (err) -+ goto err_netdev; -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (xrx200_mdio_probe(dev, &priv->port[i])) -+ pr_warn("xrx200-mdio: probing phy of port %d failed\n", -+ priv->port[i].num); -+ -+ return 0; -+ -+err_netdev: -+ unregister_netdev(dev); -+ free_netdev(dev); -+ return err; -+} -+ -+static void xrx200_pci_microcode(void) -+{ -+ int i; -+ -+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, -+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); -+ ltq_switch_w32(0, PCE_TBL_MASK); -+ -+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { -+ ltq_switch_w32(i, PCE_TBL_ADDR); -+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); -+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); -+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); -+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); -+ -+ // start the table access: -+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); -+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); -+ } -+ -+ /* tell the switch that the microcode is loaded */ -+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); -+} -+ -+static void xrx200_hw_init(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* enable clock gate */ -+ clk_enable(hw->clk); -+ -+ ltq_switch_w32(1, 0); -+ mdelay(100); -+ ltq_switch_w32(0, 0); -+ /* -+ * TODO: we should really disbale all phys/miis here and explicitly -+ * enable them in the device secific init function -+ */ -+ -+ /* disable port fetch/store dma */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32(0, FDMA_PCTRLx(i)); -+ ltq_switch_w32(0, SDMA_PCTRLx(i)); -+ } -+ -+ /* enable Switch */ -+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); -+ -+ /* load the pce microcode */ -+ xrx200_pci_microcode(); -+ -+ /* Default unknown Broadcat/Multicast/Unicast port maps */ -+ ltq_switch_w32(0x40, PCE_PMAP1); -+ ltq_switch_w32(0x40, PCE_PMAP2); -+ ltq_switch_w32(0x40, PCE_PMAP3); -+ -+ /* RMON Counter Enable for all physical ports */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFG(i)); -+ -+ /* disable auto polling */ -+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); -+ -+ /* enable port statistic counters */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFGx(i)); -+ -+ /* set IPG to 12 */ -+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); -+ -+#ifdef SW_ROUTING -+ /* enable status header, enable CRC */ -+ ltq_pmac_w32_mask(0, -+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#else -+ /* disable status header, enable CRC */ -+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, -+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#endif -+ -+ /* enable port fetch/store dma & VLAN Modification */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); -+ } -+ -+ /* enable special tag insertion on cpu port */ -+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); -+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); -+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); -+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0); -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ hw->vlan_vid[i] = i; -+} -+ -+static void xrx200_hw_cleanup(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* disable the switch */ -+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); -+ -+ /* free the channels and IRQs */ -+ for (i = 0; i < 2; i++) { -+ ltq_dma_free(&hw->chan[i].dma); -+ if (hw->chan[i].dma.irq) -+ free_irq(hw->chan[i].dma.irq, hw); -+ } -+ -+ /* free the allocated RX ring */ -+ for (i = 0; i < LTQ_DESC_NUM; i++) -+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); -+ -+ /* clear the mdio bus */ -+ mdiobus_unregister(hw->mii_bus); -+ mdiobus_free(hw->mii_bus); -+ -+ /* release the clock */ -+ clk_disable(hw->clk); -+ clk_put(hw->clk); -+} -+ -+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) -+{ -+ hw->mii_bus = mdiobus_alloc(); -+ if (!hw->mii_bus) -+ return -ENOMEM; -+ -+ hw->mii_bus->read = xrx200_mdio_rd; -+ hw->mii_bus->write = xrx200_mdio_wr; -+ hw->mii_bus->name = "lantiq,xrx200-mdio"; -+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); -+ -+ if (of_mdiobus_register(hw->mii_bus, np)) { -+ mdiobus_free(hw->mii_bus); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) -+{ -+ const __be32 *addr, *id = of_get_property(port, "reg", NULL); -+ struct xrx200_port *p = &priv->port[priv->num_port]; -+ -+ if (!id) -+ return; -+ -+ memset(p, 0, sizeof(struct xrx200_port)); -+ p->phy_node = of_parse_phandle(port, "phy-handle", 0); -+ addr = of_get_property(p->phy_node, "reg", NULL); -+ if (!addr) -+ return; -+ -+ p->num = *id; -+ p->phy_addr = *addr; -+ p->phy_if = of_get_phy_mode(port); -+ if (p->phy_addr > 0x10) -+ p->flags = XRX200_PORT_TYPE_MAC; -+ else -+ p->flags = XRX200_PORT_TYPE_PHY; -+ priv->num_port++; -+ -+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); -+ if (gpio_is_valid(p->gpio)) -+ if (!gpio_request(p->gpio, "phy-reset")) { -+ gpio_direction_output(p->gpio, -+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); -+ udelay(100); -+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ /* is this port a wan port ? */ -+ if (priv->wan) -+ priv->hw->wan_map |= BIT(p->num); -+ -+ priv->port_map |= BIT(p->num); -+ -+ /* store the port id in the hw struct so we can map ports -> devices */ -+ priv->hw->port_map[p->num] = priv->hw->num_devs; -+} -+ -+static const struct net_device_ops xrx200_netdev_ops = { -+ .ndo_init = xrx200_init, -+ .ndo_open = xrx200_open, -+ .ndo_stop = xrx200_close, -+ .ndo_start_xmit = xrx200_start_xmit, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_change_mtu = eth_change_mtu, -+ .ndo_get_stats = xrx200_get_stats, -+ .ndo_tx_timeout = xrx200_tx_timeout, -+}; -+ -+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface) -+{ -+ struct xrx200_priv *priv; -+ struct device_node *port; -+ const __be32 *wan; -+ const u8 *mac; -+ -+ /* alloc the network device */ -+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); -+ if (!hw->devs[hw->num_devs]) -+ return; -+ -+ /* setup the network device */ -+ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); -+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; -+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; -+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; -+ -+ /* setup our private data */ -+ priv = netdev_priv(hw->devs[hw->num_devs]); -+ priv->hw = hw; -+ priv->id = hw->num_devs; -+ -+ mac = of_get_mac_address(iface); -+ if (mac) -+ memcpy(priv->mac, mac, ETH_ALEN); -+ -+ /* is this the wan interface ? */ -+ wan = of_get_property(iface, "lantiq,wan", NULL); -+ if (wan && (*wan == 1)) -+ priv->wan = 1; -+ -+ /* should the switch be enabled on this interface ? */ -+ if (of_find_property(iface, "lantiq,switch", NULL)) -+ priv->sw = 1; -+ -+ /* load the ports that are part of the interface */ -+ for_each_child_of_node(iface, port) -+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) -+ xrx200_of_port(priv, port); -+ -+ /* register the actual device */ -+ if (!register_netdev(hw->devs[hw->num_devs])) -+ hw->num_devs++; -+} -+ -+static struct xrx200_hw xrx200_hw; -+ -+static int xrx200_probe(struct platform_device *pdev) -+{ -+ struct resource *res[4]; -+ struct device_node *mdio_np, *iface_np; -+ int i; -+ -+ /* load the memory ranges */ -+ for (i = 0; i < 4; i++) { -+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); -+ if (!res[i]) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENOENT; -+ } -+ } -+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]); -+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]); -+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]); -+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]); -+ if (!xrx200_switch_membase || !xrx200_mdio_membase || -+ !xrx200_mii_membase || !xrx200_pmac_membase) { -+ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); -+ return -ENOMEM; -+ } -+ -+ /* get the clock */ -+ xrx200_hw.clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(xrx200_hw.clk)) { -+ dev_err(&pdev->dev, "failed to get clock\n"); -+ return PTR_ERR(xrx200_hw.clk); -+ } -+ -+ /* bring up the dma engine and IP core */ -+ xrx200_dma_init(&xrx200_hw); -+ xrx200_hw_init(&xrx200_hw); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]); -+ -+ /* bring up the mdio bus */ -+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, -+ "lantiq,xrx200-mdio"); -+ if (mdio_np) -+ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) -+ dev_err(&pdev->dev, "mdio probe failed\n"); -+ -+ /* load the interfaces */ -+ for_each_child_of_node(pdev->dev.of_node, iface_np) -+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { -+ if (xrx200_hw.num_devs < XRX200_MAX_DEV) -+ xrx200_of_iface(&xrx200_hw, iface_np); -+ else -+ dev_err(&pdev->dev, -+ "only %d interfaces allowed\n", -+ XRX200_MAX_DEV); -+ } -+ -+ if (!xrx200_hw.num_devs) { -+ xrx200_hw_cleanup(&xrx200_hw); -+ dev_err(&pdev->dev, "failed to load interfaces\n"); -+ return -ENOENT; -+ } -+ -+ xrx200sw_init(&xrx200_hw); -+ -+ /* set wan port mask */ -+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); -+ -+ for (i = 0; i < xrx200_hw.num_devs; i++) { -+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i]; -+ } -+ -+ /* setup NAPI */ -+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); -+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, -+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); -+ -+ platform_set_drvdata(pdev, &xrx200_hw); -+ -+ return 0; -+} -+ -+static int xrx200_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct xrx200_priv *priv; -+ -+ if (!dev) -+ return 0; -+ -+ priv = netdev_priv(dev); -+ -+ /* free stack related instances */ -+ netif_stop_queue(dev); -+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); -+ -+ /* shut down hardware */ -+ xrx200_hw_cleanup(&xrx200_hw); -+ -+ /* remove the actual device */ -+ unregister_netdev(dev); -+ free_netdev(dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id xrx200_match[] = { -+ { .compatible = "lantiq,xrx200-net" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xrx200_match); -+ -+static struct platform_driver xrx200_driver = { -+ .probe = xrx200_probe, -+ .remove = xrx200_remove, -+ .driver = { -+ .name = "lantiq,xrx200-net", -+ .of_match_table = xrx200_match, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(xrx200_driver); -+ -+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h -@@ -0,0 +1,1328 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com> -+ * -+ * VR9 switch registers extracted from 310TUJ0 switch api -+ * WARNING mult values of 0x00 may not be correct -+ * -+ */ -+ -+enum { -+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */ -+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */ -+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */ -+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */ -+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */ -+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */ -+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */ -+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */ -+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */ -+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */ -+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */ -+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */ -+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */ -+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */ -+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */ -+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */ -+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */ -+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */ -+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */ -+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */ -+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */ -+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */ -+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */ -+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */ -+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */ -+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */ -+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */ -+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */ -+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */ -+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */ -+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */ -+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */ -+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */ -+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */ -+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */ -+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */ -+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */ -+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */ -+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */ -+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */ -+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */ -+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */ -+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */ -+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */ -+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */ -+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */ -+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */ -+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */ -+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */ -+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */ -+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */ -+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */ -+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */ -+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */ -+// XRX200_ETHSW_IER, /* Interrupt Enable Register */ -+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */ -+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */ -+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */ -+// XRX200_ETHSW_ISR, /* Interrupt Status Register */ -+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */ -+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */ -+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */ -+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */ -+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */ -+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */ -+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */ -+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */ -+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */ -+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */ -+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */ -+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */ -+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */ -+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */ -+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */ -+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */ -+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */ -+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */ -+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */ -+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */ -+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */ -+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */ -+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */ -+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */ -+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */ -+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */ -+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */ -+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */ -+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */ -+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */ -+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */ -+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */ -+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */ -+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */ -+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */ -+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */ -+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */ -+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */ -+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */ -+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */ -+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */ -+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_BM_RAM_ADDR, /* RAM Address Register */ -+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */ -+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */ -+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */ -+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */ -+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */ -+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */ -+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */ -+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */ -+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */ -+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */ -+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */ -+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */ -+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */ -+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */ -+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */ -+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */ -+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */ -+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */ -+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */ -+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */ -+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */ -+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */ -+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */ -+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */ -+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */ -+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */ -+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */ -+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */ -+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */ -+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */ -+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */ -+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */ -+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */ -+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */ -+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */ -+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */ -+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */ -+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */ -+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */ -+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */ -+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */ -+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */ -+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */ -+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */ -+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */ -+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */ -+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */ -+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */ -+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */ -+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */ -+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */ -+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */ -+// XRX200_BM_CISEL_PORT, /* Port Number */ -+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */ -+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */ -+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */ -+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */ -+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */ -+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */ -+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */ -+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */ -+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */ -+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */ -+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */ -+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */ -+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */ -+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */ -+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */ -+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */ -+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */ -+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */ -+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */ -+// XRX200_RS_CBS_CBS, /* Committed Burst Size */ -+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */ -+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */ -+// XRX200_RS_CIR_EXP_EXP, /* Exponent */ -+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */ -+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */ -+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */ -+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */ -+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */ -+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */ -+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */ -+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */ -+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */ -+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */ -+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */ -+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */ -+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */ -+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */ -+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */ -+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */ -+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */ -+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */ -+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */ -+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */ -+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */ -+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */ -+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */ -+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */ -+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */ -+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */ -+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */ -+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */ -+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */ -+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */ -+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */ -+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */ -+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */ -+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */ -+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */ -+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */ -+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */ -+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */ -+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */ -+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */ -+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */ -+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */ -+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */ -+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */ -+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */ -+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */ -+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */ -+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */ -+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */ -+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */ -+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */ -+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */ -+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */ -+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */ -+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */ -+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */ -+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */ -+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */ -+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */ -+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */ -+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */ -+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */ -+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */ -+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */ -+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */ -+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */ -+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */ -+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */ -+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */ -+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */ -+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */ -+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */ -+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */ -+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */ -+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */ -+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */ -+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */ -+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */ -+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */ -+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */ -+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */ -+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */ -+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */ -+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */ -+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */ -+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */ -+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */ -+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */ -+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */ -+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */ -+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */ -+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */ -+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */ -+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */ -+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */ -+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */ -+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */ -+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */ -+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */ -+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */ -+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */ -+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */ -+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */ -+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */ -+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */ -+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */ -+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */ -+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */ -+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */ -+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */ -+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */ -+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */ -+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */ -+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */ -+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */ -+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */ -+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */ -+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */ -+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_CTRL_PORT, /* WoL Enable */ -+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */ -+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */ -+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */ -+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */ -+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */ -+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */ -+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */ -+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */ -+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */ -+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */ -+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */ -+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */ -+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */ -+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */ -+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */ -+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */ -+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */ -+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */ -+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */ -+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */ -+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */ -+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */ -+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */ -+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */ -+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */ -+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */ -+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */ -+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */ -+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */ -+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */ -+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */ -+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */ -+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */ -+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */ -+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */ -+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */ -+// XRX200_MAC_TEST, /* MAC Test Register */ -+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */ -+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */ -+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */ -+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */ -+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */ -+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */ -+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */ -+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */ -+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */ -+// XRX200_MAC_FLEN, /* MAC Frame Length Register */ -+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */ -+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */ -+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */ -+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */ -+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */ -+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */ -+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */ -+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */ -+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */ -+// XRX200_MAC_PSTAT, /* MAC Port Status Register */ -+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */ -+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */ -+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */ -+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */ -+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */ -+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */ -+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */ -+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */ -+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */ -+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */ -+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */ -+// XRX200_MAC_PISR_PACT, /* PHY Active Status */ -+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */ -+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */ -+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */ -+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */ -+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */ -+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */ -+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */ -+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */ -+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */ -+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */ -+// XRX200_MAC_PIER_PACT, /* PHY Active Status */ -+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */ -+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */ -+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */ -+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */ -+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */ -+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */ -+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */ -+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */ -+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */ -+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */ -+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */ -+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */ -+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */ -+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */ -+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */ -+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */ -+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */ -+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */ -+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */ -+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */ -+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */ -+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */ -+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */ -+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */ -+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */ -+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */ -+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */ -+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */ -+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */ -+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */ -+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */ -+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */ -+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */ -+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */ -+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */ -+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */ -+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */ -+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */ -+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */ -+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */ -+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */ -+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */ -+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */ -+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */ -+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */ -+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */ -+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */ -+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */ -+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */ -+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */ -+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */ -+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */ -+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */ -+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */ -+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */ -+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */ -+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */ -+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */ -+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */ -+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */ -+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */ -+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */ -+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */ -+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */ -+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */ -+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */ -+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */ -+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */ -+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */ -+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */ -+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */ -+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */ -+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */ -+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */ -+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */ -+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */ -+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */ -+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */ -+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */ -+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */ -+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */ -+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */ -+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */ -+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */ -+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */ -+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */ -+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */ -+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */ -+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */ -+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */ -+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */ -+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */ -+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */ -+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */ -+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */ -+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */ -+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */ -+// XRX200_SDMA_IER_BFULL, /* Buffer Full */ -+// XRX200_SDMA_IER_FERR, /* Frame Error */ -+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */ -+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */ -+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */ -+// XRX200_SDMA_ISR_FERR, /* Frame Error */ -+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */ -+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */ -+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */ -+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */ -+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */ -+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */ -+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */ -+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */ -+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */ -+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */ -+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */ -+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */ -+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */ -+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */ -+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */ -+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */ -+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */ -+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */ -+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */ -+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */ -+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */ -+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */ -+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+}; -+ -+ -+struct xrx200sw_reg { -+ int offset; -+ int shift; -+ int size; -+ int mult; -+} xrx200sw_reg[] = { -+// offeset shift size mult -+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */ -+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */ -+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */ -+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */ -+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */ -+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */ -+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */ -+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */ -+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */ -+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */ -+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */ -+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */ -+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */ -+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */ -+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */ -+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */ -+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */ -+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */ -+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */ -+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */ -+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */ -+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */ -+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */ -+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */ -+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */ -+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */ -+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */ -+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */ -+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */ -+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */ -+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */ -+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */ -+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */ -+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */ -+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */ -+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */ -+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */ -+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */ -+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */ -+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */ -+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */ -+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */ -+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */ -+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */ -+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */ -+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */ -+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */ -+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */ -+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */ -+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */ -+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */ -+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */ -+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */ -+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */ -+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */ -+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */ -+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */ -+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */ -+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */ -+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */ -+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */ -+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */ -+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */ -+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */ -+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */ -+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */ -+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */ -+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */ -+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */ -+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */ -+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */ -+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */ -+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */ -+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */ -+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */ -+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */ -+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */ -+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */ -+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */ -+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */ -+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */ -+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */ -+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */ -+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */ -+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */ -+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */ -+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */ -+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */ -+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */ -+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */ -+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */ -+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */ -+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */ -+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */ -+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */ -+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */ -+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */ -+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */ -+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */ -+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */ -+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */ -+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */ -+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */ -+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */ -+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */ -+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */ -+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */ -+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */ -+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */ -+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */ -+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */ -+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */ -+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */ -+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */ -+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */ -+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */ -+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */ -+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */ -+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */ -+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */ -+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */ -+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */ -+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */ -+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */ -+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */ -+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */ -+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */ -+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */ -+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */ -+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */ -+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */ -+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */ -+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */ -+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */ -+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */ -+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */ -+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */ -+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */ -+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */ -+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */ -+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */ -+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */ -+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */ -+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */ -+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */ -+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */ -+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */ -+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */ -+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */ -+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */ -+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */ -+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */ -+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */ -+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */ -+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */ -+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */ -+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */ -+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */ -+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */ -+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */ -+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */ -+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */ -+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */ -+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */ -+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */ -+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */ -+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */ -+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */ -+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */ -+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */ -+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */ -+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */ -+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */ -+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */ -+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */ -+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */ -+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */ -+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */ -+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */ -+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */ -+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */ -+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */ -+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */ -+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */ -+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */ -+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */ -+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */ -+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */ -+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */ -+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */ -+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */ -+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */ -+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */ -+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */ -+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */ -+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */ -+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */ -+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */ -+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */ -+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */ -+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */ -+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */ -+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */ -+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */ -+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */ -+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */ -+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */ -+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */ -+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */ -+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */ -+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */ -+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */ -+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */ -+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */ -+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */ -+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */ -+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */ -+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */ -+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */ -+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */ -+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */ -+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */ -+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */ -+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */ -+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */ -+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */ -+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */ -+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */ -+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */ -+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */ -+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */ -+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */ -+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */ -+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */ -+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */ -+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */ -+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */ -+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */ -+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */ -+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */ -+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */ -+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */ -+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */ -+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */ -+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */ -+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */ -+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */ -+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */ -+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */ -+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */ -+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */ -+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */ -+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */ -+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */ -+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */ -+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */ -+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */ -+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */ -+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */ -+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */ -+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */ -+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */ -+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */ -+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */ -+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */ -+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */ -+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */ -+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */ -+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */ -+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */ -+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */ -+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */ -+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */ -+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */ -+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */ -+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */ -+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */ -+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */ -+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */ -+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */ -+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */ -+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */ -+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */ -+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */ -+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */ -+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */ -+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */ -+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */ -+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */ -+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */ -+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */ -+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */ -+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */ -+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */ -+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */ -+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */ -+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */ -+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */ -+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */ -+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */ -+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */ -+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */ -+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */ -+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */ -+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */ -+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */ -+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */ -+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */ -+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */ -+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */ -+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */ -+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */ -+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */ -+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */ -+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */ -+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */ -+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */ -+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */ -+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */ -+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */ -+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */ -+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */ -+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */ -+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */ -+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */ -+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */ -+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */ -+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */ -+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */ -+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */ -+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */ -+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */ -+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */ -+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */ -+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */ -+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */ -+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */ -+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */ -+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */ -+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */ -+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */ -+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */ -+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */ -+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */ -+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */ -+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */ -+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */ -+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */ -+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */ -+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */ -+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */ -+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */ -+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */ -+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */ -+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */ -+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */ -+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */ -+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */ -+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */ -+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */ -+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */ -+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */ -+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */ -+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */ -+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */ -+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */ -+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */ -+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */ -+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */ -+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */ -+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */ -+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */ -+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */ -+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */ -+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */ -+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */ -+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */ -+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */ -+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */ -+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */ -+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */ -+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */ -+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */ -+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */ -+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */ -+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */ -+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */ -+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */ -+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */ -+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */ -+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */ -+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */ -+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */ -+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */ -+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */ -+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */ -+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */ -+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */ -+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */ -+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */ -+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */ -+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */ -+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */ -+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */ -+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */ -+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */ -+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */ -+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */ -+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */ -+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */ -+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */ -+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */ -+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */ -+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */ -+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */ -+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */ -+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */ -+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */ -+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */ -+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */ -+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */ -+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */ -+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */ -+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */ -+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */ -+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */ -+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */ -+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */ -+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */ -+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */ -+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */ -+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */ -+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */ -+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */ -+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */ -+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */ -+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */ -+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */ -+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */ -+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */ -+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */ -+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */ -+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */ -+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */ -+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */ -+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */ -+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */ -+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */ -+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */ -+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */ -+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */ -+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */ -+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */ -+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */ -+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */ -+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */ -+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */ -+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */ -+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */ -+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */ -+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */ -+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */ -+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */ -+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */ -+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */ -+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */ -+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */ -+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */ -+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */ -+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */ -+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */ -+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */ -+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */ -+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */ -+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */ -+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */ -+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */ -+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */ -+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */ -+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */ -+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */ -+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */ -+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */ -+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */ -+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */ -+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */ -+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */ -+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */ -+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */ -+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */ -+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */ -+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */ -+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */ -+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */ -+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */ -+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */ -+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */ -+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */ -+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */ -+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */ -+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */ -+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */ -+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */ -+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */ -+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */ -+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */ -+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */ -+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */ -+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */ -+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */ -+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */ -+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */ -+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */ -+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */ -+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */ -+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */ -+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */ -+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */ -+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */ -+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */ -+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */ -+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */ -+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */ -+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */ -+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */ -+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */ -+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */ -+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */ -+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */ -+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */ -+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+}; -+ -+ diff --git a/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch deleted file mode 100644 index f52f6f544b..0000000000 --- a/target/linux/lantiq/patches-4.4/0026-NET-multi-phy-support.patch +++ /dev/null @@ -1,53 +0,0 @@ -From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Sun, 27 Jul 2014 09:38:50 +0100 -Subject: [PATCH 26/36] NET: multi phy support - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/net/phy/phy.c | 9 ++++++--- - include/linux/phy.h | 1 + - 2 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -893,7 +893,8 @@ void phy_state_machine(struct work_struc - /* If the link is down, give up on negotiation for now */ - if (!phydev->link) { - phydev->state = PHY_NOLINK; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - break; - } -@@ -985,7 +986,8 @@ void phy_state_machine(struct work_struc - netif_carrier_on(phydev->attached_dev); - } else { - phydev->state = PHY_NOLINK; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - } - - phydev->adjust_link(phydev->attached_dev); -@@ -997,7 +999,8 @@ void phy_state_machine(struct work_struc - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; -- netif_carrier_off(phydev->attached_dev); -+ if (!phydev->no_auto_carrier_off) -+ netif_carrier_off(phydev->attached_dev); - phydev->adjust_link(phydev->attached_dev); - do_suspend = true; - } ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -377,6 +377,7 @@ struct phy_device { - bool is_pseudo_fixed_link; - bool has_fixups; - bool suspended; -+ bool no_auto_carrier_off; - - enum phy_state state; - diff --git a/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch deleted file mode 100644 index 81eccf24bc..0000000000 --- a/target/linux/lantiq/patches-4.4/0028-NET-lantiq-various-etop-fixes.patch +++ /dev/null @@ -1,911 +0,0 @@ -From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Tue, 9 Sep 2014 22:45:34 +0200 -Subject: [PATCH 28/36] NET: lantiq: various etop fixes - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++----------- - 1 file changed, 389 insertions(+), 166 deletions(-) - ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -11,7 +11,7 @@ - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - * -- * Copyright (C) 2011 John Crispin <blogic@openwrt.org> -+ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org> - */ - - #include <linux/kernel.h> -@@ -30,11 +30,16 @@ - #include <linux/mm.h> - #include <linux/platform_device.h> - #include <linux/ethtool.h> -+#include <linux/if_vlan.h> - #include <linux/init.h> - #include <linux/delay.h> - #include <linux/io.h> - #include <linux/dma-mapping.h> - #include <linux/module.h> -+#include <linux/clk.h> -+#include <linux/of_net.h> -+#include <linux/of_irq.h> -+#include <linux/of_platform.h> - - #include <asm/checksum.h> - -@@ -42,7 +47,7 @@ - #include <xway_dma.h> - #include <lantiq_platform.h> - --#define LTQ_ETOP_MDIO 0x11804 -+#define LTQ_ETOP_MDIO_ACC 0x11804 - #define MDIO_REQUEST 0x80000000 - #define MDIO_READ 0x40000000 - #define MDIO_ADDR_MASK 0x1f -@@ -51,44 +56,91 @@ - #define MDIO_REG_OFFSET 0x10 - #define MDIO_VAL_MASK 0xffff - --#define PPE32_CGEN 0x800 --#define LQ_PPE32_ENET_MAC_CFG 0x1840 -+#define LTQ_ETOP_MDIO_CFG 0x11800 -+#define MDIO_CFG_MASK 0x6 -+ -+#define LTQ_ETOP_CFG 0x11808 -+#define LTQ_ETOP_IGPLEN 0x11820 -+#define LTQ_ETOP_MAC_CFG 0x11840 - - #define LTQ_ETOP_ENETS0 0x11850 - #define LTQ_ETOP_MAC_DA0 0x1186C - #define LTQ_ETOP_MAC_DA1 0x11870 --#define LTQ_ETOP_CFG 0x16020 --#define LTQ_ETOP_IGPLEN 0x16080 -+ -+#define MAC_CFG_MASK 0xfff -+#define MAC_CFG_CGEN (1 << 11) -+#define MAC_CFG_DUPLEX (1 << 2) -+#define MAC_CFG_SPEED (1 << 1) -+#define MAC_CFG_LINK (1 << 0) - - #define MAX_DMA_CHAN 0x8 - #define MAX_DMA_CRC_LEN 0x4 - #define MAX_DMA_DATA_LEN 0x600 - - #define ETOP_FTCU BIT(28) --#define ETOP_MII_MASK 0xf --#define ETOP_MII_NORMAL 0xd --#define ETOP_MII_REVERSE 0xe - #define ETOP_PLEN_UNDER 0x40 --#define ETOP_CGEN 0x800 -+#define ETOP_CFG_MII0 0x01 - --/* use 2 static channels for TX/RX */ --#define LTQ_ETOP_TX_CHANNEL 1 --#define LTQ_ETOP_RX_CHANNEL 6 --#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL) --#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL) -+#define ETOP_CFG_MASK 0xfff -+#define ETOP_CFG_FEN0 (1 << 8) -+#define ETOP_CFG_SEN0 (1 << 6) -+#define ETOP_CFG_OFF1 (1 << 3) -+#define ETOP_CFG_REMII0 (1 << 1) -+#define ETOP_CFG_OFF0 (1 << 0) -+ -+#define LTQ_GBIT_MDIO_CTL 0xCC -+#define LTQ_GBIT_MDIO_DATA 0xd0 -+#define LTQ_GBIT_GCTL0 0x68 -+#define LTQ_GBIT_PMAC_HD_CTL 0x8c -+#define LTQ_GBIT_P0_CTL 0x4 -+#define LTQ_GBIT_PMAC_RX_IPG 0xa8 -+#define LTQ_GBIT_RGMII_CTL 0x78 -+ -+#define PMAC_HD_CTL_AS (1 << 19) -+#define PMAC_HD_CTL_RXSH (1 << 22) -+ -+/* Switch Enable (0=disable, 1=enable) */ -+#define GCTL0_SE 0x80000000 -+/* Disable MDIO auto polling (0=disable, 1=enable) */ -+#define PX_CTL_DMDIO 0x00400000 -+ -+/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */ -+#define MDC_CLOCK_MASK 0xff000000 -+#define MDC_CLOCK_OFFSET 24 -+ -+/* register information for the gbit's MDIO bus */ -+#define MDIO_XR9_REQUEST 0x00008000 -+#define MDIO_XR9_READ 0x00000800 -+#define MDIO_XR9_WRITE 0x00000400 -+#define MDIO_XR9_REG_MASK 0x1f -+#define MDIO_XR9_ADDR_MASK 0x1f -+#define MDIO_XR9_RD_MASK 0xffff -+#define MDIO_XR9_REG_OFFSET 0 -+#define MDIO_XR9_ADDR_OFFSET 5 -+#define MDIO_XR9_WR_OFFSET 16 - -+#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \ -+ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0)) -+ -+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */ - #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x)) - #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y)) - #define ltq_etop_w32_mask(x, y, z) \ - ltq_w32_mask(x, y, ltq_etop_membase + (z)) - --#define DRV_VERSION "1.0" -+#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x)) -+#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y)) -+#define ltq_gbit_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, ltq_gbit_membase + (z)) -+ -+#define DRV_VERSION "1.2" - - static void __iomem *ltq_etop_membase; -+static void __iomem *ltq_gbit_membase; - - struct ltq_etop_chan { -- int idx; - int tx_free; -+ int irq; - struct net_device *netdev; - struct napi_struct napi; - struct ltq_dma_channel dma; -@@ -98,22 +150,35 @@ struct ltq_etop_chan { - struct ltq_etop_priv { - struct net_device *netdev; - struct platform_device *pdev; -- struct ltq_eth_data *pldata; - struct resource *res; - - struct mii_bus *mii_bus; - struct phy_device *phydev; - -- struct ltq_etop_chan ch[MAX_DMA_CHAN]; -- int tx_free[MAX_DMA_CHAN >> 1]; -+ struct ltq_etop_chan txch; -+ struct ltq_etop_chan rxch; -+ -+ int tx_irq; -+ int rx_irq; -+ -+ unsigned char mac[6]; -+ int mii_mode; - - spinlock_t lock; -+ -+ struct clk *clk_ppe; -+ struct clk *clk_switch; -+ struct clk *clk_ephy; -+ struct clk *clk_ephycgu; - }; - -+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, -+ int phy_reg, u16 phy_data); -+ - static int - ltq_etop_alloc_skb(struct ltq_etop_chan *ch) - { -- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN); -+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN); - if (!ch->skb[ch->dma.desc]) - return -ENOMEM; - ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, -@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan - spin_unlock_irqrestore(&priv->lock, flags); - - skb_put(skb, len); -+ skb->dev = ch->netdev; - skb->protocol = eth_type_trans(skb, ch->netdev); - netif_receive_skb(skb); -+ ch->netdev->stats.rx_packets++; -+ ch->netdev->stats.rx_bytes += len; - } - - static int -@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *nap - { - struct ltq_etop_chan *ch = container_of(napi, - struct ltq_etop_chan, napi); -+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev); - int rx = 0; - int complete = 0; -+ unsigned long flags; - - while ((rx < budget) && !complete) { - struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *nap - } - if (complete || !rx) { - napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->lock, flags); - ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->lock, flags); - } - return rx; - } -@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *nap - container_of(napi, struct ltq_etop_chan, napi); - struct ltq_etop_priv *priv = netdev_priv(ch->netdev); - struct netdev_queue *txq = -- netdev_get_tx_queue(ch->netdev, ch->idx >> 1); -+ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - while ((ch->dma.desc_base[ch->tx_free].ctl & - (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ ch->netdev->stats.tx_packets++; -+ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len; - dev_kfree_skb_any(ch->skb[ch->tx_free]); - ch->skb[ch->tx_free] = NULL; - memset(&ch->dma.desc_base[ch->tx_free], 0, -@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *nap - if (netif_tx_queue_stopped(txq)) - netif_tx_start_queue(txq); - napi_complete(&ch->napi); -+ spin_lock_irqsave(&priv->lock, flags); - ltq_dma_ack_irq(&ch->dma); -+ spin_unlock_irqrestore(&priv->lock, flags); - return 1; - } - -@@ -210,9 +286,10 @@ static irqreturn_t - ltq_etop_dma_irq(int irq, void *_priv) - { - struct ltq_etop_priv *priv = _priv; -- int ch = irq - LTQ_DMA_CH0_INT; -- -- napi_schedule(&priv->ch[ch].napi); -+ if (irq == priv->txch.dma.irq) -+ napi_schedule(&priv->txch.napi); -+ else -+ napi_schedule(&priv->rxch.napi); - return IRQ_HANDLED; - } - -@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device - ltq_dma_free(&ch->dma); - if (ch->dma.irq) - free_irq(ch->dma.irq, priv); -- if (IS_RX(ch->idx)) { -+ if (ch == &priv->txch) { - int desc; - for (desc = 0; desc < LTQ_DESC_NUM; desc++) - dev_kfree_skb_any(ch->skb[ch->dma.desc]); -@@ -235,65 +312,133 @@ static void - ltq_etop_hw_exit(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; - -- ltq_pmu_disable(PMU_PPE); -- for (i = 0; i < MAX_DMA_CHAN; i++) -- if (IS_TX(i) || IS_RX(i)) -- ltq_etop_free_channel(dev, &priv->ch[i]); -+ clk_disable(priv->clk_ppe); -+ -+ if (of_machine_is_compatible("lantiq,ar9")) -+ clk_disable(priv->clk_switch); -+ -+ if (of_machine_is_compatible("lantiq,ase")) { -+ clk_disable(priv->clk_ephy); -+ clk_disable(priv->clk_ephycgu); -+ } -+ -+ ltq_etop_free_channel(dev, &priv->txch); -+ ltq_etop_free_channel(dev, &priv->rxch); -+} -+ -+static void -+ltq_etop_gbit_init(struct net_device *dev) -+{ -+ struct ltq_etop_priv *priv = netdev_priv(dev); -+ -+ clk_enable(priv->clk_switch); -+ -+ /* enable gbit port0 on the SoC */ -+ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL); -+ -+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0); -+ /* disable MDIO auto polling mode */ -+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL); -+ /* set 1522 packet size */ -+ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0); -+ /* disable pmac & dmac headers */ -+ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0, -+ LTQ_GBIT_PMAC_HD_CTL); -+ /* Due to traffic halt when burst length 8, -+ replace default IPG value with 0x3B */ -+ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); -+ /* set mdc clock to 2.5 MHz */ -+ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET, -+ LTQ_GBIT_RGMII_CTL); - } - - static int - ltq_etop_hw_init(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; -+ int mii_mode = priv->mii_mode; - -- ltq_pmu_enable(PMU_PPE); -+ clk_enable(priv->clk_ppe); -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ ltq_etop_gbit_init(dev); -+ /* force the etops link to the gbit to MII */ -+ mii_mode = PHY_INTERFACE_MODE_MII; -+ } -+ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG); -+ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX | -+ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG); - -- switch (priv->pldata->mii_mode) { -+ switch (mii_mode) { - case PHY_INTERFACE_MODE_RMII: -- ltq_etop_w32_mask(ETOP_MII_MASK, -- ETOP_MII_REVERSE, LTQ_ETOP_CFG); -+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 | -+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); - break; - - case PHY_INTERFACE_MODE_MII: -- ltq_etop_w32_mask(ETOP_MII_MASK, -- ETOP_MII_NORMAL, LTQ_ETOP_CFG); -+ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 | -+ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); - break; - - default: -+ if (of_machine_is_compatible("lantiq,ase")) { -+ clk_enable(priv->clk_ephy); -+ /* disable external MII */ -+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG); -+ /* enable clock for internal PHY */ -+ clk_enable(priv->clk_ephycgu); -+ /* we need to write this magic to the internal phy to -+ make it work */ -+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020); -+ pr_info("Selected EPHY mode\n"); -+ break; -+ } - netdev_err(dev, "unknown mii mode %d\n", -- priv->pldata->mii_mode); -+ mii_mode); - return -ENOTSUPP; - } - -- /* enable crc generation */ -- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG); -+ return 0; -+} -+ -+static int -+ltq_etop_dma_init(struct net_device *dev) -+{ -+ struct ltq_etop_priv *priv = netdev_priv(dev); -+ int tx = priv->tx_irq - LTQ_DMA_ETOP; -+ int rx = priv->rx_irq - LTQ_DMA_ETOP; -+ int err; - - ltq_dma_init_port(DMA_PORT_ETOP); - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- int irq = LTQ_DMA_CH0_INT + i; -- struct ltq_etop_chan *ch = &priv->ch[i]; -- -- ch->idx = ch->dma.nr = i; -- -- if (IS_TX(i)) { -- ltq_dma_alloc_tx(&ch->dma); -- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv); -- } else if (IS_RX(i)) { -- ltq_dma_alloc_rx(&ch->dma); -- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -- ch->dma.desc++) -- if (ltq_etop_alloc_skb(ch)) -- return -ENOMEM; -- ch->dma.desc = 0; -- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv); -+ priv->txch.dma.nr = tx; -+ ltq_dma_alloc_tx(&priv->txch.dma); -+ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv); -+ if (err) { -+ netdev_err(dev, "failed to allocate tx irq\n"); -+ goto err_out; -+ } -+ priv->txch.dma.irq = priv->tx_irq; -+ -+ priv->rxch.dma.nr = rx; -+ ltq_dma_alloc_rx(&priv->rxch.dma); -+ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM; -+ priv->rxch.dma.desc++) { -+ if (ltq_etop_alloc_skb(&priv->rxch)) { -+ netdev_err(dev, "failed to allocate skbs\n"); -+ err = -ENOMEM; -+ goto err_out; - } -- ch->dma.irq = irq; - } -- return 0; -+ priv->rxch.dma.desc = 0; -+ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv); -+ if (err) -+ netdev_err(dev, "failed to allocate rx irq\n"); -+ else -+ priv->rxch.dma.irq = priv->rx_irq; -+err_out: -+ return err; - } - - static void -@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_ethtool_gset(priv->phydev, cmd); -+ if (priv->phydev) -+ return phy_ethtool_gset(priv->phydev, cmd); -+ else -+ return 0; - } - - static int -@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_ethtool_sset(priv->phydev, cmd); -+ if (priv->phydev) -+ return phy_ethtool_sset(priv->phydev, cmd); -+ else -+ return 0; - } - - static int -@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *d - { - struct ltq_etop_priv *priv = netdev_priv(dev); - -- return phy_start_aneg(priv->phydev); -+ if (priv->phydev) -+ return phy_start_aneg(priv->phydev); -+ else -+ return 0; - } - - static const struct ethtool_ops ltq_etop_ethtool_ops = { -@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop - }; - - static int -+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr, -+ int phy_reg, u16 phy_data) -+{ -+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE | -+ (phy_data << MDIO_XR9_WR_OFFSET) | -+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | -+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); -+ -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ return 0; -+} -+ -+static int -+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg) -+{ -+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ | -+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | -+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); -+ -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); -+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) -+ ; -+ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK; -+ return val; -+} -+ -+static int - ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) - { - u32 val = MDIO_REQUEST | -@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in - ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) | - phy_data; - -- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) -+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) - ; -- ltq_etop_w32(val, LTQ_ETOP_MDIO); -+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); - return 0; - } - -@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in - ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) | - ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET); - -- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) -+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) - ; -- ltq_etop_w32(val, LTQ_ETOP_MDIO); -- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) -+ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); -+ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) - ; -- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK; -+ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK; - return val; - } - -@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *d - { - struct ltq_etop_priv *priv = netdev_priv(dev); - struct phy_device *phydev = NULL; -- int phy_addr; -+ u32 phy_supported = (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_Autoneg -+ | SUPPORTED_MII -+ | SUPPORTED_TP); - -- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { -- if (priv->mii_bus->phy_map[phy_addr]) { -- phydev = priv->mii_bus->phy_map[phy_addr]; -- break; -- } -- } -+ if (of_machine_is_compatible("lantiq,ase")) -+ phydev = priv->mii_bus->phy_map[8]; -+ else -+ phydev = priv->mii_bus->phy_map[0]; - - if (!phydev) { - netdev_err(dev, "no PHY found\n"); -@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *d - } - - phydev = phy_connect(dev, dev_name(&phydev->dev), -- <q_etop_mdio_link, priv->pldata->mii_mode); -+ <q_etop_mdio_link, priv->mii_mode); - - if (IS_ERR(phydev)) { - netdev_err(dev, "Could not attach to PHY\n"); - return PTR_ERR(phydev); - } - -- phydev->supported &= (SUPPORTED_10baseT_Half -- | SUPPORTED_10baseT_Full -- | SUPPORTED_100baseT_Half -- | SUPPORTED_100baseT_Full -- | SUPPORTED_Autoneg -- | SUPPORTED_MII -- | SUPPORTED_TP); -+ if (of_machine_is_compatible("lantiq,ar9")) -+ phy_supported |= SUPPORTED_1000baseT_Half -+ | SUPPORTED_1000baseT_Full; - -+ phydev->supported &= phy_supported; - phydev->advertising = phydev->supported; - priv->phydev = phydev; - pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", -@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *de - } - - priv->mii_bus->priv = dev; -- priv->mii_bus->read = ltq_etop_mdio_rd; -- priv->mii_bus->write = ltq_etop_mdio_wr; -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ priv->mii_bus->read = ltq_etop_mdio_rd_xr9; -+ priv->mii_bus->write = ltq_etop_mdio_wr_xr9; -+ } else { -+ priv->mii_bus->read = ltq_etop_mdio_rd; -+ priv->mii_bus->write = ltq_etop_mdio_wr; -+ } - priv->mii_bus->name = "ltq_mii"; - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", - priv->pdev->name, priv->pdev->id); -@@ -480,17 +673,19 @@ static int - ltq_etop_open(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; -+ unsigned long flags; - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- struct ltq_etop_chan *ch = &priv->ch[i]; -+ napi_enable(&priv->txch.napi); -+ napi_enable(&priv->rxch.napi); -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ ltq_dma_open(&priv->txch.dma); -+ ltq_dma_open(&priv->rxch.dma); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ if (priv->phydev) -+ phy_start(priv->phydev); - -- if (!IS_TX(i) && (!IS_RX(i))) -- continue; -- ltq_dma_open(&ch->dma); -- napi_enable(&ch->napi); -- } -- phy_start(priv->phydev); - netif_tx_start_all_queues(dev); - return 0; - } -@@ -499,18 +694,19 @@ static int - ltq_etop_stop(struct net_device *dev) - { - struct ltq_etop_priv *priv = netdev_priv(dev); -- int i; -+ unsigned long flags; - - netif_tx_stop_all_queues(dev); -- phy_stop(priv->phydev); -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- struct ltq_etop_chan *ch = &priv->ch[i]; -- -- if (!IS_RX(i) && !IS_TX(i)) -- continue; -- napi_disable(&ch->napi); -- ltq_dma_close(&ch->dma); -- } -+ if (priv->phydev) -+ phy_stop(priv->phydev); -+ napi_disable(&priv->txch.napi); -+ napi_disable(&priv->rxch.napi); -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ ltq_dma_close(&priv->txch.dma); -+ ltq_dma_close(&priv->rxch.dma); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ - return 0; - } - -@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct - int queue = skb_get_queue_mapping(skb); - struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); - struct ltq_etop_priv *priv = netdev_priv(dev); -- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1]; -- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -- int len; -+ struct ltq_dma_desc *desc = -+ &priv->txch.dma.desc_base[priv->txch.dma.desc]; - unsigned long flags; - u32 byte_offset; -+ int len; - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - -- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -- dev_kfree_skb_any(skb); -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || -+ priv->txch.skb[priv->txch.dma.desc]) { - netdev_err(dev, "tx ring full\n"); - netif_tx_stop_queue(txq); - return NETDEV_TX_BUSY; -@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct - - /* dma needs to start on a 16 byte aligned address */ - byte_offset = CPHYSADDR(skb->data) % 16; -- ch->skb[ch->dma.desc] = skb; -+ priv->txch.skb[priv->txch.dma.desc] = skb; - - dev->trans_start = jiffies; - -@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct - wmb(); - desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | - LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -- ch->dma.desc++; -- ch->dma.desc %= LTQ_DESC_NUM; -+ priv->txch.dma.desc++; -+ priv->txch.dma.desc %= LTQ_DESC_NUM; - spin_unlock_irqrestore(&priv->lock, flags); - -- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) -+ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN) - netif_tx_stop_queue(txq); - - return NETDEV_TX_OK; -@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *d - struct ltq_etop_priv *priv = netdev_priv(dev); - unsigned long flags; - -+ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; -+ - spin_lock_irqsave(&priv->lock, flags); -- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, -+ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, - LTQ_ETOP_IGPLEN); - spin_unlock_irqrestore(&priv->lock, flags); - } -@@ -638,6 +836,9 @@ ltq_etop_init(struct net_device *dev) - if (err) - goto err_hw; - ltq_etop_change_mtu(dev, 1500); -+ err = ltq_etop_dma_init(dev); -+ if (err) -+ goto err_hw; - - memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); - if (!is_valid_ether_addr(mac.sa_data)) { -@@ -655,9 +856,10 @@ ltq_etop_init(struct net_device *dev) - dev->addr_assign_type = NET_ADDR_RANDOM; - - ltq_etop_set_multicast_list(dev); -- err = ltq_etop_mdio_init(dev); -- if (err) -- goto err_netdev; -+ if (!ltq_etop_mdio_init(dev)) -+ dev->ethtool_ops = <q_etop_ethtool_ops; -+ else -+ pr_warn("etop: mdio probe failed\n");; - return 0; - - err_netdev: -@@ -677,6 +879,9 @@ ltq_etop_tx_timeout(struct net_device *d - err = ltq_etop_hw_init(dev); - if (err) - goto err_hw; -+ err = ltq_etop_dma_init(dev); -+ if (err) -+ goto err_hw; - dev->trans_start = jiffies; - netif_wake_queue(dev); - return; -@@ -700,14 +905,19 @@ static const struct net_device_ops ltq_e - .ndo_tx_timeout = ltq_etop_tx_timeout, - }; - --static int __init --ltq_etop_probe(struct platform_device *pdev) -+static int ltq_etop_probe(struct platform_device *pdev) - { - struct net_device *dev; - struct ltq_etop_priv *priv; -- struct resource *res; -+ struct resource *res, *gbit_res, irqres[2]; -+ const u8 *mac; - int err; -- int i; -+ -+ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2); -+ if (err != 2) { -+ dev_err(&pdev->dev, "failed to get etop irqs\n"); -+ return -EINVAL; -+ } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { -@@ -733,30 +943,61 @@ ltq_etop_probe(struct platform_device *p - goto err_out; - } - -- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); -- if (!dev) { -- err = -ENOMEM; -- goto err_out; -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!gbit_res) { -+ dev_err(&pdev->dev, "failed to get gbit resource\n"); -+ err = -ENOENT; -+ goto err_out; -+ } -+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev, -+ gbit_res->start, resource_size(gbit_res)); -+ if (!ltq_gbit_membase) { -+ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n", -+ pdev->id); -+ err = -ENOMEM; -+ goto err_out; -+ } - } -+ -+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); - strcpy(dev->name, "eth%d"); - dev->netdev_ops = <q_eth_netdev_ops; -- dev->ethtool_ops = <q_etop_ethtool_ops; - priv = netdev_priv(dev); - priv->res = res; - priv->pdev = pdev; -- priv->pldata = dev_get_platdata(&pdev->dev); - priv->netdev = dev; -+ priv->tx_irq = irqres[0].start; -+ priv->rx_irq = irqres[1].start; -+ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); -+ -+ mac = of_get_mac_address(pdev->dev.of_node); -+ if (mac) -+ memcpy(priv->mac, mac, ETH_ALEN); -+ -+ priv->clk_ppe = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk_ppe)) -+ return PTR_ERR(priv->clk_ppe); -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ priv->clk_switch = clk_get(&pdev->dev, "switch"); -+ if (IS_ERR(priv->clk_switch)) -+ return PTR_ERR(priv->clk_switch); -+ } -+ if (of_machine_is_compatible("lantiq,ase")) { -+ priv->clk_ephy = clk_get(&pdev->dev, "ephy"); -+ if (IS_ERR(priv->clk_ephy)) -+ return PTR_ERR(priv->clk_ephy); -+ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu"); -+ if (IS_ERR(priv->clk_ephycgu)) -+ return PTR_ERR(priv->clk_ephycgu); -+ } -+ - spin_lock_init(&priv->lock); - -- for (i = 0; i < MAX_DMA_CHAN; i++) { -- if (IS_TX(i)) -- netif_napi_add(dev, &priv->ch[i].napi, -- ltq_etop_poll_tx, 8); -- else if (IS_RX(i)) -- netif_napi_add(dev, &priv->ch[i].napi, -- ltq_etop_poll_rx, 32); -- priv->ch[i].netdev = dev; -- } -+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); -+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); -+ priv->txch.netdev = dev; -+ priv->rxch.netdev = dev; - - err = register_netdev(dev); - if (err) -@@ -785,31 +1026,22 @@ ltq_etop_remove(struct platform_device * - return 0; - } - -+static const struct of_device_id ltq_etop_match[] = { -+ { .compatible = "lantiq,etop-xway" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_etop_match); -+ - static struct platform_driver ltq_mii_driver = { -+ .probe = ltq_etop_probe, - .remove = ltq_etop_remove, - .driver = { - .name = "ltq_etop", -+ .of_match_table = ltq_etop_match, - }, - }; - --int __init --init_ltq_etop(void) --{ -- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe); -- -- if (ret) -- pr_err("ltq_etop: Error registering platform driver!"); -- return ret; --} -- --static void __exit --exit_ltq_etop(void) --{ -- platform_driver_unregister(<q_mii_driver); --} -- --module_init(init_ltq_etop); --module_exit(exit_ltq_etop); -+module_platform_driver(ltq_mii_driver); - - MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); - MODULE_DESCRIPTION("Lantiq SoC ETOP"); diff --git a/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch deleted file mode 100644 index 1148ec4e26..0000000000 --- a/target/linux/lantiq/patches-4.4/0030-GPIO-add-named-gpio-exports.patch +++ /dev/null @@ -1,170 +0,0 @@ -From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Tue, 12 Aug 2014 20:49:27 +0200 -Subject: [PATCH 30/36] GPIO: add named gpio exports - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpiolib.c | 11 +++++-- - include/asm-generic/gpio.h | 5 +++ - include/linux/gpio/consumer.h | 8 +++++ - 4 files changed, 90 insertions(+), 2 deletions(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -23,6 +23,8 @@ - #include <linux/pinctrl/pinctrl.h> - #include <linux/slab.h> - #include <linux/gpio/machine.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> - - #include "gpiolib.h" - -@@ -450,3 +452,73 @@ void of_gpiochip_remove(struct gpio_chip - gpiochip_remove_pin_ranges(chip); - of_node_put(chip->of_node); - } -+ -+#ifdef CONFIG_GPIO_SYSFS -+ -+static struct of_device_id gpio_export_ids[] = { -+ { .compatible = "gpio-export" }, -+ { /* sentinel */ } -+}; -+ -+static int __init of_gpio_export_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *cnp; -+ u32 val; -+ int nb = 0; -+ -+ for_each_child_of_node(np, cnp) { -+ const char *name = NULL; -+ int gpio; -+ bool dmc; -+ int max_gpio = 1; -+ int i; -+ -+ of_property_read_string(cnp, "gpio-export,name", &name); -+ -+ if (!name) -+ max_gpio = of_gpio_count(cnp); -+ -+ for (i = 0; i < max_gpio; i++) { -+ unsigned flags = 0; -+ enum of_gpio_flags of_flags; -+ -+ gpio = of_get_gpio_flags(cnp, i, &of_flags); -+ -+ if (of_flags == OF_GPIO_ACTIVE_LOW) -+ flags |= GPIOF_ACTIVE_LOW; -+ -+ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) -+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; -+ else -+ flags |= GPIOF_IN; -+ -+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) -+ continue; -+ -+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); -+ gpio_export_with_name(gpio, dmc, name); -+ nb++; -+ } -+ } -+ -+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_export_driver = { -+ .driver = { -+ .name = "gpio-export", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(gpio_export_ids), -+ }, -+}; -+ -+static int __init of_gpio_export_init(void) -+{ -+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); -+} -+device_initcall(of_gpio_export_init); -+ -+#endif ---- a/include/asm-generic/gpio.h -+++ b/include/asm-generic/gpio.h -@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g - return gpiod_export(gpio_to_desc(gpio), direction_may_change); - } - -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); -+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) -+{ -+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); -+} -+ - static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) - { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get - - #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) - -+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); - int gpiod_export(struct gpio_desc *desc, bool direction_may_change); - int gpiod_export_link(struct device *dev, const char *name, - struct gpio_desc *desc); -@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de - - #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ - -+static inline int _gpiod_export(struct gpio_desc *desc, -+ bool direction_may_change, -+ const char *name) -+{ -+ return -ENOSYS; -+} -+ - static inline int gpiod_export(struct gpio_desc *desc, - bool direction_may_change) - { ---- a/drivers/gpio/gpiolib-sysfs.c -+++ b/drivers/gpio/gpiolib-sysfs.c -@@ -544,7 +544,7 @@ static struct class gpio_class = { - * - * Returns zero on success, else an error. - */ --int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) - { - struct gpio_chip *chip; - struct gpiod_data *data; -@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); - if (chip->names && chip->names[offset]) - ioname = chip->names[offset]; -+ if (name) -+ ioname = name; - - dev = device_create_with_groups(&gpio_class, chip->dev, - MKDEV(0, 0), data, gpio_groups, -@@ -625,6 +627,12 @@ err_unlock: - gpiod_dbg(desc, "%s: status %d\n", __func__, status); - return status; - } -+EXPORT_SYMBOL_GPL(__gpiod_export); -+ -+int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+{ -+ return __gpiod_export(desc, direction_may_change, NULL); -+} - EXPORT_SYMBOL_GPL(gpiod_export); - - static int match_export(struct device *dev, const void *desc) diff --git a/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch deleted file mode 100644 index ab2c0570eb..0000000000 --- a/target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ /dev/null @@ -1,1034 +0,0 @@ -From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 7 Aug 2014 18:26:42 +0200 -Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master - -This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs. - -Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - drivers/i2c/busses/Kconfig | 10 + - drivers/i2c/busses/Makefile | 1 + - drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++ - drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++ - 4 files changed, 992 insertions(+) - create mode 100644 drivers/i2c/busses/i2c-lantiq.c - create mode 100644 drivers/i2c/busses/i2c-lantiq.h - ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -639,6 +639,16 @@ config I2C_MESON - If you say yes to this option, support will be included for the - I2C interface on the Amlogic Meson family of SoCs. - -+config I2C_LANTIQ -+ tristate "Lantiq I2C interface" -+ depends on LANTIQ && SOC_FALCON -+ help -+ If you say yes to this option, support will be included for the -+ Lantiq I2C core. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-lantiq. -+ - config I2C_MPC - tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" - depends on PPC ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o - obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o - obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o - obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o -+obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o - obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o - obj-$(CONFIG_I2C_MESON) += i2c-meson.o - obj-$(CONFIG_I2C_MPC) += i2c-mpc.o ---- /dev/null -+++ b/drivers/i2c/busses/i2c-lantiq.c -@@ -0,0 +1,747 @@ -+ -+/* -+ * Lantiq I2C bus adapter -+ * -+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/slab.h> /* for kzalloc, kfree */ -+#include <linux/i2c.h> -+#include <linux/errno.h> -+#include <linux/completion.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+#include <linux/of_irq.h> -+ -+#include <lantiq_soc.h> -+#include "i2c-lantiq.h" -+ -+/* -+ * CURRENT ISSUES: -+ * - no high speed support -+ * - ten bit mode is not tested (no slave devices) -+ */ -+ -+/* access macros */ -+#define i2c_r32(reg) \ -+ __raw_readl(&(priv->membase)->reg) -+#define i2c_w32(val, reg) \ -+ __raw_writel(val, &(priv->membase)->reg) -+#define i2c_w32_mask(clear, set, reg) \ -+ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg) -+ -+#define DRV_NAME "i2c-lantiq" -+#define DRV_VERSION "1.00" -+ -+#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */ -+ -+#ifdef DEBUG -+#define LTQ_I2C_XFER_TIMEOUT (25*HZ) -+#else -+#define LTQ_I2C_XFER_TIMEOUT HZ -+#endif -+ -+#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ -+ I2C_IMSC_I2C_ERR_INT_EN) -+ -+#define LTQ_I2C_ARB_LOST (1 << 0) -+#define LTQ_I2C_NACK (1 << 1) -+#define LTQ_I2C_RX_UFL (1 << 2) -+#define LTQ_I2C_RX_OFL (1 << 3) -+#define LTQ_I2C_TX_UFL (1 << 4) -+#define LTQ_I2C_TX_OFL (1 << 5) -+ -+struct ltq_i2c { -+ struct mutex mutex; -+ -+ -+ /* active clock settings */ -+ unsigned int input_clock; /* clock input for i2c hardware block */ -+ unsigned int i2c_clock; /* approximated bus clock in kHz */ -+ -+ struct clk *clk_gate; -+ struct clk *clk_input; -+ -+ -+ /* resources (memory and interrupts) */ -+ int irq_lb; /* last burst irq */ -+ -+ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */ -+ -+ struct i2c_adapter adap; -+ struct device *dev; -+ -+ struct completion cmd_complete; -+ -+ -+ /* message transfer data */ -+ struct i2c_msg *current_msg; /* current message */ -+ int msgs_num; /* number of messages to handle */ -+ u8 *msg_buf; /* current buffer */ -+ u32 msg_buf_len; /* remaining length of current buffer */ -+ int msg_err; /* error status of the current transfer */ -+ -+ -+ /* master status codes */ -+ enum { -+ STATUS_IDLE, -+ STATUS_ADDR, /* address phase */ -+ STATUS_WRITE, -+ STATUS_READ, -+ STATUS_READ_END, -+ STATUS_STOP -+ } status; -+}; -+ -+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id); -+ -+static inline void enable_burst_irq(struct ltq_i2c *priv) -+{ -+ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); -+} -+static inline void disable_burst_irq(struct ltq_i2c *priv) -+{ -+ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); -+} -+ -+static void prepare_msg_send_addr(struct ltq_i2c *priv) -+{ -+ struct i2c_msg *msg = priv->current_msg; -+ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */ -+ u16 addr = msg->addr; -+ -+ /* new i2c_msg */ -+ priv->msg_buf = msg->buf; -+ priv->msg_buf_len = msg->len; -+ if (rd) -+ priv->status = STATUS_READ; -+ else -+ priv->status = STATUS_WRITE; -+ -+ /* send slave address */ -+ if (msg->flags & I2C_M_TEN) { -+ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); -+ i2c_w32(addr & 0xff, txd); -+ } else { -+ i2c_w32((addr & 0x7f) << 1 | rd, txd); -+ } -+} -+ -+static void ltq_i2c_set_tx_len(struct ltq_i2c *priv) -+{ -+ struct i2c_msg *msg = priv->current_msg; -+ int len = (msg->flags & I2C_M_TEN) ? 2 : 1; -+ -+ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T'); -+ -+ priv->status = STATUS_ADDR; -+ -+ if (!(msg->flags & I2C_M_RD)) -+ len += msg->len; -+ else -+ /* set maximum received packet size (before rx int!) */ -+ i2c_w32(msg->len, mrps_ctrl); -+ i2c_w32(len, tps_ctrl); -+ enable_burst_irq(priv); -+} -+ -+static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap) -+{ -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ unsigned int input_clock = clk_get_rate(priv->clk_input); -+ u32 dec, inc = 1; -+ -+ /* clock changed? */ -+ if (priv->input_clock == input_clock) -+ return 0; -+ -+ /* -+ * this formula is only an approximation, found by the recommended -+ * values in the "I2C Architecture Specification 1.7.1" -+ */ -+ dec = input_clock / (priv->i2c_clock * 2); -+ if (dec <= 6) -+ return -ENXIO; -+ -+ i2c_w32(0, fdiv_high_cfg); -+ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) | -+ (dec << I2C_FDIV_CFG_DEC_OFFSET), -+ fdiv_cfg); -+ -+ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n", -+ input_clock, priv->i2c_clock, dec); -+ -+ priv->input_clock = input_clock; -+ return 0; -+} -+ -+static int ltq_i2c_hw_init(struct i2c_adapter *adap) -+{ -+ int ret = 0; -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ -+ /* disable bus */ -+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); -+ -+#ifndef DEBUG -+ /* set normal operation clock divider */ -+ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); -+#else -+ /* for debugging a higher divider value! */ -+ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); -+#endif -+ -+ /* setup clock */ -+ ret = ltq_i2c_hw_set_clock(adap); -+ if (ret != 0) { -+ dev_warn(priv->dev, "invalid clock settings\n"); -+ return ret; -+ } -+ -+ /* configure fifo */ -+ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ -+ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ -+ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ -+ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ -+ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ -+ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ -+ fifo_cfg); -+ -+ /* configure address */ -+ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in -+ the fifo */ -+ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ -+ I2C_ADDR_CFG_MnS_EN | /* we are master device */ -+ 0, /* our slave address (not used!) */ -+ addr_cfg); -+ -+ /* enable bus */ -+ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); -+ -+ return 0; -+} -+ -+static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv) -+{ -+ unsigned long timeout; -+ -+ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT); -+ -+ do { -+ u32 stat = i2c_r32(bus_stat); -+ -+ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE) -+ return 0; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ -+ dev_err(priv->dev, "timeout waiting for bus ready\n"); -+ return -ETIMEDOUT; -+} -+ -+static void ltq_i2c_tx(struct ltq_i2c *priv, int last) -+{ -+ if (priv->msg_buf_len && priv->msg_buf) { -+ i2c_w32(*priv->msg_buf, txd); -+ -+ if (--priv->msg_buf_len) -+ priv->msg_buf++; -+ else -+ priv->msg_buf = NULL; -+ } else { -+ last = 1; -+ } -+ -+ if (last) -+ disable_burst_irq(priv); -+} -+ -+static void ltq_i2c_rx(struct ltq_i2c *priv, int last) -+{ -+ u32 fifo_stat, timeout; -+ if (priv->msg_buf_len && priv->msg_buf) { -+ timeout = 5000000; -+ do { -+ fifo_stat = i2c_r32(ffs_stat); -+ } while (!fifo_stat && --timeout); -+ if (!timeout) { -+ last = 1; -+ pr_debug("\nrx timeout\n"); -+ goto err; -+ } -+ while (fifo_stat) { -+ *priv->msg_buf = i2c_r32(rxd); -+ if (--priv->msg_buf_len) { -+ priv->msg_buf++; -+ } else { -+ priv->msg_buf = NULL; -+ last = 1; -+ break; -+ } -+ /* -+ * do not read more than burst size, otherwise no "last -+ * burst" is generated and the transaction is blocked! -+ */ -+ fifo_stat = 0; -+ } -+ } else { -+ last = 1; -+ } -+err: -+ if (last) { -+ disable_burst_irq(priv); -+ -+ if (priv->status == STATUS_READ_END) { -+ /* -+ * do the STATUS_STOP and complete() here, as sometimes -+ * the tx_end is already seen before this is finished -+ */ -+ priv->status = STATUS_STOP; -+ complete(&priv->cmd_complete); -+ } else { -+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); -+ priv->status = STATUS_READ_END; -+ } -+ } -+} -+ -+static void ltq_i2c_xfer_init(struct ltq_i2c *priv) -+{ -+ /* enable interrupts */ -+ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc); -+ -+ /* trigger transfer of first msg */ -+ ltq_i2c_set_tx_len(priv); -+} -+ -+static void dump_msgs(struct i2c_msg msgs[], int num, int rx) -+{ -+#if defined(DEBUG) -+ int i, j; -+ pr_debug("Messages %d %s\n", num, rx ? "out" : "in"); -+ for (i = 0; i < num; i++) { -+ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i, -+ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T', -+ msgs[i].len, msgs[i].addr); -+ if (!(msgs[i].flags & I2C_M_RD) || rx) { -+ for (j = 0; j < msgs[i].len; j++) -+ pr_debug("%02X ", msgs[i].buf[j]); -+ } -+ pr_debug("\n"); -+ } -+#endif -+} -+ -+static void ltq_i2c_release_bus(struct ltq_i2c *priv) -+{ -+ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) -+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); -+} -+ -+static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], -+ int num) -+{ -+ struct ltq_i2c *priv = i2c_get_adapdata(adap); -+ int ret; -+ -+ dev_dbg(priv->dev, "xfer %u messages\n", num); -+ dump_msgs(msgs, num, 0); -+ -+ mutex_lock(&priv->mutex); -+ -+ init_completion(&priv->cmd_complete); -+ priv->current_msg = msgs; -+ priv->msgs_num = num; -+ priv->msg_err = 0; -+ priv->status = STATUS_IDLE; -+ -+ /* wait for the bus to become ready */ -+ ret = ltq_i2c_wait_bus_not_busy(priv); -+ if (ret) -+ goto done; -+ -+ while (priv->msgs_num) { -+ /* start the transfers */ -+ ltq_i2c_xfer_init(priv); -+ -+ /* wait for transfers to complete */ -+ ret = wait_for_completion_interruptible_timeout( -+ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT); -+ if (ret == 0) { -+ dev_err(priv->dev, "controller timed out\n"); -+ ltq_i2c_hw_init(adap); -+ ret = -ETIMEDOUT; -+ goto done; -+ } else if (ret < 0) -+ goto done; -+ -+ if (priv->msg_err) { -+ if (priv->msg_err & LTQ_I2C_NACK) -+ ret = -ENXIO; -+ else -+ ret = -EREMOTEIO; -+ goto done; -+ } -+ if (--priv->msgs_num) -+ priv->current_msg++; -+ } -+ /* no error? */ -+ ret = num; -+ -+done: -+ ltq_i2c_release_bus(priv); -+ -+ mutex_unlock(&priv->mutex); -+ -+ if (ret >= 0) -+ dump_msgs(msgs, num, 1); -+ -+ pr_debug("XFER ret %d\n", ret); -+ return ret; -+} -+ -+static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id) -+{ -+ struct ltq_i2c *priv = dev_id; -+ struct i2c_msg *msg = priv->current_msg; -+ int last = (irq == priv->irq_lb); -+ -+ if (last) -+ pr_debug("LB "); -+ else -+ pr_debug("B "); -+ -+ if (msg->flags & I2C_M_RD) { -+ switch (priv->status) { -+ case STATUS_ADDR: -+ pr_debug("X"); -+ prepare_msg_send_addr(priv); -+ disable_burst_irq(priv); -+ break; -+ case STATUS_READ: -+ case STATUS_READ_END: -+ pr_debug("R"); -+ ltq_i2c_rx(priv, last); -+ break; -+ default: -+ disable_burst_irq(priv); -+ pr_warn("Status R %d\n", priv->status); -+ break; -+ } -+ } else { -+ switch (priv->status) { -+ case STATUS_ADDR: -+ pr_debug("x"); -+ prepare_msg_send_addr(priv); -+ break; -+ case STATUS_WRITE: -+ pr_debug("w"); -+ ltq_i2c_tx(priv, last); -+ break; -+ default: -+ disable_burst_irq(priv); -+ pr_warn("Status W %d\n", priv->status); -+ break; -+ } -+ } -+ -+ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); -+ return IRQ_HANDLED; -+} -+ -+static void ltq_i2c_isr_prot(struct ltq_i2c *priv) -+{ -+ u32 i_pro = i2c_r32(p_irqss); -+ -+ pr_debug("i2c-p"); -+ -+ /* not acknowledge */ -+ if (i_pro & I2C_P_IRQSS_NACK) { -+ priv->msg_err |= LTQ_I2C_NACK; -+ pr_debug(" nack"); -+ } -+ -+ /* arbitration lost */ -+ if (i_pro & I2C_P_IRQSS_AL) { -+ priv->msg_err |= LTQ_I2C_ARB_LOST; -+ pr_debug(" arb-lost"); -+ } -+ /* tx -> rx switch */ -+ if (i_pro & I2C_P_IRQSS_RX) -+ pr_debug(" rx"); -+ -+ /* tx end */ -+ if (i_pro & I2C_P_IRQSS_TX_END) -+ pr_debug(" txend"); -+ pr_debug("\n"); -+ -+ if (!priv->msg_err) { -+ /* tx -> rx switch */ -+ if (i_pro & I2C_P_IRQSS_RX) { -+ priv->status = STATUS_READ; -+ enable_burst_irq(priv); -+ } -+ if (i_pro & I2C_P_IRQSS_TX_END) { -+ if (priv->status == STATUS_READ) -+ priv->status = STATUS_READ_END; -+ else { -+ disable_burst_irq(priv); -+ priv->status = STATUS_STOP; -+ } -+ } -+ } -+ -+ i2c_w32(i_pro, p_irqsc); -+} -+ -+static irqreturn_t ltq_i2c_isr(int irq, void *dev_id) -+{ -+ u32 i_raw, i_err = 0; -+ struct ltq_i2c *priv = dev_id; -+ -+ i_raw = i2c_r32(mis); -+ pr_debug("i_raw 0x%08X\n", i_raw); -+ -+ /* error interrupt */ -+ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { -+ i_err = i2c_r32(err_irqss); -+ pr_debug("i_err 0x%08X bus_stat 0x%04X\n", -+ i_err, i2c_r32(bus_stat)); -+ -+ /* tx fifo overflow (8) */ -+ if (i_err & I2C_ERR_IRQSS_TXF_OFL) -+ priv->msg_err |= LTQ_I2C_TX_OFL; -+ -+ /* tx fifo underflow (4) */ -+ if (i_err & I2C_ERR_IRQSS_TXF_UFL) -+ priv->msg_err |= LTQ_I2C_TX_UFL; -+ -+ /* rx fifo overflow (2) */ -+ if (i_err & I2C_ERR_IRQSS_RXF_OFL) -+ priv->msg_err |= LTQ_I2C_RX_OFL; -+ -+ /* rx fifo underflow (1) */ -+ if (i_err & I2C_ERR_IRQSS_RXF_UFL) -+ priv->msg_err |= LTQ_I2C_RX_UFL; -+ -+ i2c_w32(i_err, err_irqsc); -+ } -+ -+ /* protocol interrupt */ -+ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) -+ ltq_i2c_isr_prot(priv); -+ -+ if ((priv->msg_err) || (priv->status == STATUS_STOP)) -+ complete(&priv->cmd_complete); -+ -+ return IRQ_HANDLED; -+} -+ -+static u32 ltq_i2c_functionality(struct i2c_adapter *adap) -+{ -+ return I2C_FUNC_I2C | -+ I2C_FUNC_10BIT_ADDR | -+ I2C_FUNC_SMBUS_EMUL; -+} -+ -+static struct i2c_algorithm ltq_i2c_algorithm = { -+ .master_xfer = ltq_i2c_xfer, -+ .functionality = ltq_i2c_functionality, -+}; -+ -+static int ltq_i2c_probe(struct platform_device *pdev) -+{ -+ struct device_node *node = pdev->dev.of_node; -+ struct ltq_i2c *priv; -+ struct i2c_adapter *adap; -+ struct resource *mmres, irqres[4]; -+ int ret = 0; -+ -+ dev_dbg(&pdev->dev, "probing\n"); -+ -+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ret = of_irq_to_resource_table(node, irqres, 4); -+ if (!mmres || (ret != 4)) { -+ dev_err(&pdev->dev, "no resources\n"); -+ return -ENODEV; -+ } -+ -+ /* allocate private data */ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) { -+ dev_err(&pdev->dev, "can't allocate private data\n"); -+ return -ENOMEM; -+ } -+ -+ adap = &priv->adap; -+ i2c_set_adapdata(adap, priv); -+ adap->owner = THIS_MODULE; -+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; -+ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); -+ adap->algo = <q_i2c_algorithm; -+ adap->dev.parent = &pdev->dev; -+ adap->dev.of_node = pdev->dev.of_node; -+ -+ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) { -+ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n"); -+ priv->i2c_clock = 100000; -+ } -+ -+ init_completion(&priv->cmd_complete); -+ mutex_init(&priv->mutex); -+ -+ priv->membase = devm_ioremap_resource(&pdev->dev, mmres); -+ if (IS_ERR(priv->membase)) -+ return PTR_ERR(priv->membase); -+ -+ priv->dev = &pdev->dev; -+ priv->irq_lb = irqres[0].start; -+ -+ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst, -+ 0x0, "i2c lb", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get last burst IRQ %d\n", -+ irqres[0].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst, -+ 0x0, "i2c b", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get burst IRQ %d\n", -+ irqres[1].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr, -+ 0x0, "i2c err", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get error IRQ %d\n", -+ irqres[2].start); -+ return -ENODEV; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr, -+ 0x0, "i2c p", priv); -+ if (ret) { -+ dev_err(&pdev->dev, "can't get protocol IRQ %d\n", -+ irqres[3].start); -+ return -ENODEV; -+ } -+ -+ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); -+ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start, -+ irqres[1].start, irqres[2].start, irqres[3].start); -+ -+ priv->clk_gate = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(priv->clk_gate)) { -+ dev_err(&pdev->dev, "failed to get i2c clk\n"); -+ return -ENOENT; -+ } -+ -+ /* this is a static clock, which has no refcounting */ -+ priv->clk_input = clk_get_fpi(); -+ if (IS_ERR(priv->clk_input)) { -+ dev_err(&pdev->dev, "failed to get fpi clk\n"); -+ return -ENOENT; -+ } -+ -+ clk_activate(priv->clk_gate); -+ -+ /* add our adapter to the i2c stack */ -+ ret = i2c_add_numbered_adapter(adap); -+ if (ret) { -+ dev_err(&pdev->dev, "can't register I2C adapter\n"); -+ goto out; -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ i2c_set_adapdata(adap, priv); -+ -+ /* print module version information */ -+ dev_dbg(&pdev->dev, "module id=%u revision=%u\n", -+ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, -+ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); -+ -+ /* initialize HW */ -+ ret = ltq_i2c_hw_init(adap); -+ if (ret) { -+ dev_err(&pdev->dev, "can't configure adapter\n"); -+ i2c_del_adapter(adap); -+ platform_set_drvdata(pdev, NULL); -+ goto out; -+ } else { -+ dev_info(&pdev->dev, "version %s\n", DRV_VERSION); -+ } -+ -+out: -+ /* if init failed, we need to deactivate the clock gate */ -+ if (ret) -+ clk_deactivate(priv->clk_gate); -+ -+ return ret; -+} -+ -+static int ltq_i2c_remove(struct platform_device *pdev) -+{ -+ struct ltq_i2c *priv = platform_get_drvdata(pdev); -+ -+ /* disable bus */ -+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); -+ -+ /* power down the core */ -+ clk_deactivate(priv->clk_gate); -+ -+ /* remove driver */ -+ i2c_del_adapter(&priv->adap); -+ kfree(priv); -+ -+ dev_dbg(&pdev->dev, "removed\n"); -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+static const struct of_device_id ltq_i2c_match[] = { -+ { .compatible = "lantiq,lantiq-i2c" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_i2c_match); -+ -+static struct platform_driver ltq_i2c_driver = { -+ .probe = ltq_i2c_probe, -+ .remove = ltq_i2c_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = ltq_i2c_match, -+ }, -+}; -+ -+module_platform_driver(ltq_i2c_driver); -+ -+MODULE_DESCRIPTION("Lantiq I2C bus adapter"); -+MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>"); -+MODULE_ALIAS("platform:" DRV_NAME); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VERSION); ---- /dev/null -+++ b/drivers/i2c/busses/i2c-lantiq.h -@@ -0,0 +1,234 @@ -+#ifndef I2C_LANTIQ_H -+#define I2C_LANTIQ_H -+ -+/* I2C register structure */ -+struct lantiq_reg_i2c { -+ /* I2C Kernel Clock Control Register */ -+ unsigned int clc; /* 0x00000000 */ -+ /* Reserved */ -+ unsigned int res_0; /* 0x00000004 */ -+ /* I2C Identification Register */ -+ unsigned int id; /* 0x00000008 */ -+ /* Reserved */ -+ unsigned int res_1; /* 0x0000000C */ -+ /* -+ * I2C RUN Control Register -+ * This register enables and disables the I2C peripheral. Before -+ * enabling, the I2C has to be configured properly. After enabling -+ * no configuration is possible -+ */ -+ unsigned int run_ctrl; /* 0x00000010 */ -+ /* -+ * I2C End Data Control Register -+ * This register is used to either turn around the data transmission -+ * direction or to address another slave without sending a stop -+ * condition. Also the software can stop the slave-transmitter by -+ * sending a not-accolade when working as master-receiver or even -+ * stop data transmission immediately when operating as -+ * master-transmitter. The writing to the bits of this control -+ * register is only effective when in MASTER RECEIVES BYTES, MASTER -+ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state -+ */ -+ unsigned int endd_ctrl; /* 0x00000014 */ -+ /* -+ * I2C Fractional Divider Configuration Register -+ * These register is used to program the fractional divider of the I2C -+ * bus. Before the peripheral is switched on by setting the RUN-bit the -+ * two (fixed) values for the two operating frequencies are programmed -+ * into these (configuration) registers. The Register FDIV_HIGH_CFG has -+ * the same layout as I2C_FDIV_CFG. -+ */ -+ unsigned int fdiv_cfg; /* 0x00000018 */ -+ /* -+ * I2C Fractional Divider (highspeed mode) Configuration Register -+ * These register is used to program the fractional divider of the I2C -+ * bus. Before the peripheral is switched on by setting the RUN-bit the -+ * two (fixed) values for the two operating frequencies are programmed -+ * into these (configuration) registers. The Register FDIV_CFG has the -+ * same layout as I2C_FDIV_CFG. -+ */ -+ unsigned int fdiv_high_cfg; /* 0x0000001C */ -+ /* I2C Address Configuration Register */ -+ unsigned int addr_cfg; /* 0x00000020 */ -+ /* I2C Bus Status Register -+ * This register gives a status information of the I2C. This additional -+ * information can be used by the software to start proper actions. -+ */ -+ unsigned int bus_stat; /* 0x00000024 */ -+ /* I2C FIFO Configuration Register */ -+ unsigned int fifo_cfg; /* 0x00000028 */ -+ /* I2C Maximum Received Packet Size Register */ -+ unsigned int mrps_ctrl; /* 0x0000002C */ -+ /* I2C Received Packet Size Status Register */ -+ unsigned int rps_stat; /* 0x00000030 */ -+ /* I2C Transmit Packet Size Register */ -+ unsigned int tps_ctrl; /* 0x00000034 */ -+ /* I2C Filled FIFO Stages Status Register */ -+ unsigned int ffs_stat; /* 0x00000038 */ -+ /* Reserved */ -+ unsigned int res_2; /* 0x0000003C */ -+ /* I2C Timing Configuration Register */ -+ unsigned int tim_cfg; /* 0x00000040 */ -+ /* Reserved */ -+ unsigned int res_3[7]; /* 0x00000044 */ -+ /* I2C Error Interrupt Request Source Mask Register */ -+ unsigned int err_irqsm; /* 0x00000060 */ -+ /* I2C Error Interrupt Request Source Status Register */ -+ unsigned int err_irqss; /* 0x00000064 */ -+ /* I2C Error Interrupt Request Source Clear Register */ -+ unsigned int err_irqsc; /* 0x00000068 */ -+ /* Reserved */ -+ unsigned int res_4; /* 0x0000006C */ -+ /* I2C Protocol Interrupt Request Source Mask Register */ -+ unsigned int p_irqsm; /* 0x00000070 */ -+ /* I2C Protocol Interrupt Request Source Status Register */ -+ unsigned int p_irqss; /* 0x00000074 */ -+ /* I2C Protocol Interrupt Request Source Clear Register */ -+ unsigned int p_irqsc; /* 0x00000078 */ -+ /* Reserved */ -+ unsigned int res_5; /* 0x0000007C */ -+ /* I2C Raw Interrupt Status Register */ -+ unsigned int ris; /* 0x00000080 */ -+ /* I2C Interrupt Mask Control Register */ -+ unsigned int imsc; /* 0x00000084 */ -+ /* I2C Masked Interrupt Status Register */ -+ unsigned int mis; /* 0x00000088 */ -+ /* I2C Interrupt Clear Register */ -+ unsigned int icr; /* 0x0000008C */ -+ /* I2C Interrupt Set Register */ -+ unsigned int isr; /* 0x00000090 */ -+ /* I2C DMA Enable Register */ -+ unsigned int dmae; /* 0x00000094 */ -+ /* Reserved */ -+ unsigned int res_6[8154]; /* 0x00000098 */ -+ /* I2C Transmit Data Register */ -+ unsigned int txd; /* 0x00008000 */ -+ /* Reserved */ -+ unsigned int res_7[4095]; /* 0x00008004 */ -+ /* I2C Receive Data Register */ -+ unsigned int rxd; /* 0x0000C000 */ -+ /* Reserved */ -+ unsigned int res_8[4095]; /* 0x0000C004 */ -+}; -+ -+/* -+ * Clock Divider for Normal Run Mode -+ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long -+ * as the new divider value RMC is not valid, the register returns 0x0000 00xx -+ * on reading. -+ */ -+#define I2C_CLC_RMC_MASK 0x0000FF00 -+/* field offset */ -+#define I2C_CLC_RMC_OFFSET 8 -+ -+/* Fields of "I2C Identification Register" */ -+/* Module ID */ -+#define I2C_ID_ID_MASK 0x0000FF00 -+/* field offset */ -+#define I2C_ID_ID_OFFSET 8 -+/* Revision */ -+#define I2C_ID_REV_MASK 0x000000FF -+/* field offset */ -+#define I2C_ID_REV_OFFSET 0 -+ -+/* Fields of "I2C Interrupt Mask Control Register" */ -+/* Enable */ -+#define I2C_IMSC_BREQ_INT_EN 0x00000008 -+/* Enable */ -+#define I2C_IMSC_LBREQ_INT_EN 0x00000004 -+ -+/* Fields of "I2C Fractional Divider Configuration Register" */ -+/* field offset */ -+#define I2C_FDIV_CFG_INC_OFFSET 16 -+ -+/* Fields of "I2C Interrupt Mask Control Register" */ -+/* Enable */ -+#define I2C_IMSC_I2C_P_INT_EN 0x00000020 -+/* Enable */ -+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 -+ -+/* Fields of "I2C Error Interrupt Request Source Status Register" */ -+/* TXF_OFL */ -+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 -+/* TXF_UFL */ -+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 -+/* RXF_OFL */ -+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 -+/* RXF_UFL */ -+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 -+ -+/* Fields of "I2C Raw Interrupt Status Register" */ -+/* Read: Interrupt occurred. */ -+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 -+/* Read: Interrupt occurred. */ -+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 -+ -+/* Fields of "I2C FIFO Configuration Register" */ -+/* TX FIFO Flow Control */ -+#define I2C_FIFO_CFG_TXFC 0x00020000 -+/* RX FIFO Flow Control */ -+#define I2C_FIFO_CFG_RXFC 0x00010000 -+/* Word aligned (character alignment of four characters) */ -+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 -+/* Word aligned (character alignment of four characters) */ -+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 -+/* 1 word */ -+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 -+ -+/* Fields of "I2C FIFO Configuration Register" */ -+/* 1 word */ -+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 -+/* Stop on Packet End Enable */ -+#define I2C_ADDR_CFG_SOPE_EN 0x00200000 -+/* Stop on Not Acknowledge Enable */ -+#define I2C_ADDR_CFG_SONA_EN 0x00100000 -+/* Enable */ -+#define I2C_ADDR_CFG_MnS_EN 0x00080000 -+ -+/* Fields of "I2C Interrupt Clear Register" */ -+/* Clear */ -+#define I2C_ICR_BREQ_INT_CLR 0x00000008 -+/* Clear */ -+#define I2C_ICR_LBREQ_INT_CLR 0x00000004 -+ -+/* Fields of "I2C Fractional Divider Configuration Register" */ -+/* field offset */ -+#define I2C_FDIV_CFG_DEC_OFFSET 0 -+ -+/* Fields of "I2C Bus Status Register" */ -+/* Bus Status */ -+#define I2C_BUS_STAT_BS_MASK 0x00000003 -+/* Read from I2C Bus. */ -+#define I2C_BUS_STAT_RNW_READ 0x00000004 -+/* I2C Bus is free. */ -+#define I2C_BUS_STAT_BS_FREE 0x00000000 -+/* -+ * The device is working as master and has claimed the control on the -+ * I2C-bus (busy master). -+ */ -+#define I2C_BUS_STAT_BS_BM 0x00000002 -+ -+/* Fields of "I2C RUN Control Register" */ -+/* Enable */ -+#define I2C_RUN_CTRL_RUN_EN 0x00000001 -+ -+/* Fields of "I2C End Data Control Register" */ -+/* -+ * Set End of Transmission -+ * Note:Do not write '1' to this bit when bus is free. This will cause an -+ * abort after the first byte when a new transfer is started. -+ */ -+#define I2C_ENDD_CTRL_SETEND 0x00000002 -+ -+/* Fields of "I2C Protocol Interrupt Request Source Status Register" */ -+/* NACK */ -+#define I2C_P_IRQSS_NACK 0x00000010 -+/* AL */ -+#define I2C_P_IRQSS_AL 0x00000008 -+/* RX */ -+#define I2C_P_IRQSS_RX 0x00000040 -+/* TX_END */ -+#define I2C_P_IRQSS_TX_END 0x00000020 -+ -+ -+#endif /* I2C_LANTIQ_H */ diff --git a/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch deleted file mode 100644 index 64060ebcec..0000000000 --- a/target/linux/lantiq/patches-4.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch +++ /dev/null @@ -1,219 +0,0 @@ -From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Wed, 10 Sep 2014 22:42:14 +0200 -Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 + - arch/mips/lantiq/xway/Makefile | 3 + - arch/mips/lantiq/xway/ath5k_eep.c | 136 +++++++++++++++++++++ - arch/mips/lantiq/xway/eth_mac.c | 25 ++++ - drivers/net/ethernet/lantiq_etop.c | 6 +- - 5 files changed, 172 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c - create mode 100644 arch/mips/lantiq/xway/eth_mac.c - ---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h -@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev, - extern void ltq_pmu_enable(unsigned int module); - extern void ltq_pmu_disable(unsigned int module); - -+/* allow the ethernet driver to load a flash mapped mac addr */ -+const u8* ltq_get_eth_mac(void); -+ - #endif /* CONFIG_SOC_TYPE_XWAY */ - #endif /* _LTQ_XWAY_H__ */ ---- a/arch/mips/lantiq/xway/Makefile -+++ b/arch/mips/lantiq/xway/Makefile -@@ -8,4 +8,7 @@ endif - - obj-y += vmmc.o - -+obj-y += eth_mac.o -+obj-$(CONFIG_PCI) += ath5k_eep.o -+ - obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o ---- /dev/null -+++ b/arch/mips/lantiq/xway/ath5k_eep.c -@@ -0,0 +1,136 @@ -+/* -+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org> -+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org> -+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com> -+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com> -+ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -+ * Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/etherdevice.h> -+#include <linux/ath5k_platform.h> -+#include <linux/pci.h> -+#include <linux/err.h> -+#include <linux/mtd/mtd.h> -+#include <lantiq_soc.h> -+ -+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); -+struct ath5k_platform_data ath5k_pdata; -+static u8 athxk_eeprom_mac[6]; -+ -+static int ath5k_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ dev->dev.platform_data = &ath5k_pdata; -+ return 0; -+} -+ -+static int ath5k_eep_load; -+int __init of_ath5k_eeprom_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node, *mtd_np = NULL; -+ int mac_offset; -+ u32 mac_inc = 0; -+ int i; -+ struct mtd_info *the_mtd; -+ size_t flash_readlen; -+ const __be32 *list; -+ const char *part; -+ phandle phandle; -+ -+ list = of_get_property(np, "ath,eep-flash", &i); -+ if (!list || (i != (2 * sizeof(*list)))) -+ return -ENODEV; -+ -+ phandle = be32_to_cpup(list++); -+ if (phandle) -+ mtd_np = of_find_node_by_phandle(phandle); -+ -+ if (!mtd_np) -+ return -ENODEV; -+ -+ part = of_get_property(mtd_np, "label", NULL); -+ if (!part) -+ part = mtd_np->name; -+ -+ the_mtd = get_mtd_device_nm(part); -+ if (IS_ERR(the_mtd)) -+ return -ENODEV; -+ -+ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, GFP_KERNEL); -+ -+ i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1, -+ &flash_readlen, (void *) ath5k_pdata.eeprom_data); -+ -+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { -+ size_t mac_readlen; -+ mtd_read(the_mtd, mac_offset, 6, &mac_readlen, -+ (void *) athxk_eeprom_mac); -+ } -+ put_mtd_device(the_mtd); -+ -+ if (((ATH5K_PLAT_EEP_MAX_WORDS<<1) != flash_readlen) || i) { -+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n"); -+ return -ENODEV; -+ } -+ -+ if (of_find_property(np, "ath,eep-swap", NULL)) -+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++) -+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]); -+ -+ if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac()) -+ ether_addr_copy(athxk_eeprom_mac, ltq_get_eth_mac()); -+ -+ if (!is_valid_ether_addr(athxk_eeprom_mac)) { -+ dev_warn(&pdev->dev, "using random mac\n"); -+ random_ether_addr(athxk_eeprom_mac); -+ } -+ -+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) -+ athxk_eeprom_mac[5] += mac_inc; -+ -+ ath5k_pdata.macaddr = athxk_eeprom_mac; -+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init; -+ -+ dev_info(&pdev->dev, "loaded ath5k eeprom\n"); -+ -+ return 0; -+} -+ -+static struct of_device_id ath5k_eeprom_ids[] = { -+ { .compatible = "ath5k,eeprom" }, -+ { } -+}; -+ -+static struct platform_driver ath5k_eeprom_driver = { -+ .driver = { -+ .name = "ath5k,eeprom", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(ath5k_eeprom_ids), -+ }, -+}; -+ -+static int __init of_ath5k_eeprom_init(void) -+{ -+ int ret = platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); -+ -+ if (ret) -+ ath5k_eep_load = 1; -+ -+ return ret; -+} -+ -+static int __init of_ath5k_eeprom_init_late(void) -+{ -+ if (!ath5k_eep_load) -+ return 0; -+ -+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); -+} -+late_initcall(of_ath5k_eeprom_init_late); -+subsys_initcall(of_ath5k_eeprom_init); ---- /dev/null -+++ b/arch/mips/lantiq/xway/eth_mac.c -@@ -0,0 +1,25 @@ -+/* -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/if_ether.h> -+ -+static u8 eth_mac[6]; -+static int eth_mac_set; -+ -+const u8* ltq_get_eth_mac(void) -+{ -+ return eth_mac; -+} -+ -+static int __init setup_ethaddr(char *str) -+{ -+ eth_mac_set = mac_pton(str, eth_mac); -+ return !eth_mac_set; -+} -+early_param("ethaddr", setup_ethaddr); ---- a/drivers/net/ethernet/lantiq_etop.c -+++ b/drivers/net/ethernet/lantiq_etop.c -@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev) - if (err) - goto err_hw; - -- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); -+ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN); -+ -+ if (priv->mac && !is_valid_ether_addr(mac.sa_data)) -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ - if (!is_valid_ether_addr(mac.sa_data)) { - pr_warn("etop: invalid MAC, using random\n"); - eth_random_addr(mac.sa_data); diff --git a/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch deleted file mode 100644 index 5f26784621..0000000000 --- a/target/linux/lantiq/patches-4.4/0040-USB-DWC2-enable-usb-power-gpio.patch +++ /dev/null @@ -1,35 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -42,6 +42,7 @@ - #include <linux/dma-mapping.h> - #include <linux/of_device.h> - #include <linux/mutex.h> -+#include <linux/of_gpio.h> - #include <linux/platform_device.h> - #include <linux/phy/phy.h> - #include <linux/platform_data/s3c-hsotg.h> -@@ -336,6 +337,7 @@ static int dwc2_driver_probe(struct plat - struct resource *res; - int retval; - int irq; -+ int gpio_count; - - match = of_match_device(dwc2_of_match_table, &dev->dev); - if (match && match->data) { -@@ -352,6 +354,16 @@ static int dwc2_driver_probe(struct plat - defparams.dma_desc_enable = 0; - } - -+ gpio_count = of_gpio_count(dev->dev.of_node); -+ while (gpio_count > 0) { -+ enum of_gpio_flags flags; -+ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags); -+ if (gpio_request(gpio, "usb")) -+ continue; -+ dev_info(&dev->dev, "requested GPIO %d\n", gpio); -+ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ - hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); - if (!hsotg) - return -ENOMEM; diff --git a/target/linux/lantiq/patches-4.4/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-4.4/0042-arch-mips-increase-io_space_limit.patch deleted file mode 100644 index 14b417e690..0000000000 --- a/target/linux/lantiq/patches-4.4/0042-arch-mips-increase-io_space_limit.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 9807eb80a1b3bad7a4a89aa6566497bb1cadd6ef Mon Sep 17 00:00:00 2001 -From: John Crispin <john@phrozen.org> -Date: Fri, 3 Jun 2016 13:12:20 +0200 -Subject: [PATCH] arch: mips: increase io_space_limit - -this value comes from x86 and breaks some pci devices - -Signed-off-by: John Crispin <john@phrozen.org> ---- - arch/mips/include/asm/io.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/include/asm/io.h -+++ b/arch/mips/include/asm/io.h -@@ -50,7 +50,7 @@ - - /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ - --#define IO_SPACE_LIMIT 0xffff -+#define IO_SPACE_LIMIT 0xffffffff - - /* - * On MIPS I/O ports are memory mapped, so we access them using normal diff --git a/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch b/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch deleted file mode 100644 index 0ac167d070..0000000000 --- a/target/linux/lantiq/patches-4.4/0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch +++ /dev/null @@ -1,1378 +0,0 @@ -From be14811c03cf20c793fd176a347625335110b0e6 Mon Sep 17 00:00:00 2001 -From: Martin Schiller <mschiller@tdt.de> -Date: Thu, 26 Nov 2015 11:00:07 +0100 -Subject: [PATCH] pinctrl/lantiq: introduce new dedicated devicetree bindings - -This patch introduces new dedicated "lantiq,<chip>-pinctrl" devicetree -bindings, where <chip> is one of "ase", "danube", "xrx100", "xrx200" or -"xrx300" and marks the "lantiq,pinctrl-xway", "lantiq,pinctrl-ase" and -"lantiq,pinctrl-xr9" bindings as DEPRECATED. - -Based on the newest Lantiq Hardware Description it turend out, that there are -some differences in the GPIO alternative functions of the Danube, xRX100 and -xRX200 families, which makes it impossible to use only one xway_mfp table. - -This patch also adds support for the xRX300 family. - -Signed-off-by: Martin Schiller <mschiller@tdt.de> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-lantiq.h | 8 + - drivers/pinctrl/pinctrl-xway.c | 1181 +++++++++++++++++++++++++++++++++----- - 2 files changed, 1059 insertions(+), 130 deletions(-) - ---- a/drivers/pinctrl/pinctrl-lantiq.h -+++ b/drivers/pinctrl/pinctrl-lantiq.h -@@ -162,6 +162,14 @@ enum ltq_pin { - GPIO53, - GPIO54, - GPIO55, -+ GPIO56, -+ GPIO57, -+ GPIO58, -+ GPIO59, -+ GPIO60, /* 60 */ -+ GPIO61, -+ GPIO62, -+ GPIO63, - - GPIO64, - GPIO65, ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -7,6 +7,7 @@ - * publishhed by the Free Software Foundation. - * - * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ * Copyright (C) 2015 Martin Schiller <mschiller@tdt.de> - */ - - #include <linux/err.h> -@@ -24,7 +25,7 @@ - - #include <lantiq_soc.h> - --/* we have 3 1/2 banks of 16 bit each */ -+/* we have up to 4 banks of 16 bit each */ - #define PINS 16 - #define PORT3 3 - #define PORT(x) (x / PINS) -@@ -35,7 +36,7 @@ - #define MUX_ALT1 0x2 - - /* -- * each bank has this offset apart from the 1/2 bank that is mixed into the -+ * each bank has this offset apart from the 4th bank that is mixed into the - * other 3 ranges - */ - #define REG_OFF 0x30 -@@ -51,7 +52,7 @@ - #define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) - #define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) - --/* the 1/2 port needs special offsets for some registers */ -+/* the 4th port needs special offsets for some registers */ - #define GPIO3_OD (GPIO_BASE(0) + 0x24) - #define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) - #define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) -@@ -80,17 +81,18 @@ - #define FUNC_MUX(f, m) \ - { .func = f, .mux = XWAY_MUX_##m, } - --#define XWAY_MAX_PIN 32 --#define XR9_MAX_PIN 56 -- - enum xway_mux { - XWAY_MUX_GPIO = 0, - XWAY_MUX_SPI, - XWAY_MUX_ASC, -+ XWAY_MUX_USIF, - XWAY_MUX_PCI, -+ XWAY_MUX_CBUS, - XWAY_MUX_CGU, - XWAY_MUX_EBU, -+ XWAY_MUX_EBU2, - XWAY_MUX_JTAG, -+ XWAY_MUX_MCD, - XWAY_MUX_EXIN, - XWAY_MUX_TDM, - XWAY_MUX_STP, -@@ -103,9 +105,15 @@ enum xway_mux { - XWAY_MUX_DFE, - XWAY_MUX_SDIO, - XWAY_MUX_GPHY, -+ XWAY_MUX_SSI, -+ XWAY_MUX_WIFI, - XWAY_MUX_NONE = 0xffff, - }; - -+/* --------- DEPRECATED: xr9 related code --------- */ -+/* ---------- use xrx100/xrx200 instead ---------- */ -+#define XR9_MAX_PIN 56 -+ - static const struct ltq_mfp_pin xway_mfp[] = { - /* pin f0 f1 f2 f3 */ - MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), -@@ -113,7 +121,7 @@ static const struct ltq_mfp_pin xway_mfp - MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), - MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), - MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), -- MFP_XWAY(GPIO5, GPIO, STP, NONE, GPHY), -+ MFP_XWAY(GPIO5, GPIO, STP, GPHY, NONE), - MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), - MFP_XWAY(GPIO7, GPIO, CGU, PCI, GPHY), - MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), -@@ -152,7 +160,7 @@ static const struct ltq_mfp_pin xway_mfp - MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), - MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), -- MFP_XWAY(GPIO44, GPIO, NONE, GPHY, SIN), -+ MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY), - MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN), - MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), - MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN), -@@ -166,42 +174,6 @@ static const struct ltq_mfp_pin xway_mfp - MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), - }; - --static const struct ltq_mfp_pin ase_mfp[] = { -- /* pin f0 f1 f2 f3 */ -- MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), -- MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), -- MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), -- MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), -- MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), -- MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), -- MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), -- MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), -- MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), -- MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), -- MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), -- MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), -- MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), -- MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), -- MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), -- MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), -- MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), -- MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), -- MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), -- MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), -- MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), -- MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), -- MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), -- MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), -- MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), -- MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), -- MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), -- MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), -- MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), -- MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), -- MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), -- MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), --}; -- - static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; - static const unsigned pins_asc0[] = {GPIO11, GPIO12}; - static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; -@@ -231,6 +203,8 @@ static const unsigned pins_nand_cle[] = - static const unsigned pins_nand_rdy[] = {GPIO48}; - static const unsigned pins_nand_rd[] = {GPIO49}; - -+static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; -+ - static const unsigned pins_exin0[] = {GPIO0}; - static const unsigned pins_exin1[] = {GPIO1}; - static const unsigned pins_exin2[] = {GPIO2}; -@@ -240,7 +214,7 @@ static const unsigned pins_exin5[] = {GP - - static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; - static const unsigned pins_spi_cs1[] = {GPIO15}; --static const unsigned pins_spi_cs2[] = {GPIO21}; -+static const unsigned pins_spi_cs2[] = {GPIO22}; - static const unsigned pins_spi_cs3[] = {GPIO13}; - static const unsigned pins_spi_cs4[] = {GPIO10}; - static const unsigned pins_spi_cs5[] = {GPIO9}; -@@ -264,25 +238,6 @@ static const unsigned pins_pci_req2[] = - static const unsigned pins_pci_req3[] = {GPIO3}; - static const unsigned pins_pci_req4[] = {GPIO37}; - --static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; --static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; --static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; --static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; --static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; -- --static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; --static const unsigned ase_pins_spi_cs1[] = {GPIO7}; --static const unsigned ase_pins_spi_cs2[] = {GPIO15}; --static const unsigned ase_pins_spi_cs3[] = {GPIO14}; -- --static const unsigned ase_pins_exin0[] = {GPIO6}; --static const unsigned ase_pins_exin1[] = {GPIO29}; --static const unsigned ase_pins_exin2[] = {GPIO0}; -- --static const unsigned ase_pins_gpt1[] = {GPIO5}; --static const unsigned ase_pins_gpt2[] = {GPIO4}; --static const unsigned ase_pins_gpt3[] = {GPIO25}; -- - static const struct ltq_pin_group xway_grps[] = { - GRP_MUX("exin0", EXIN, pins_exin0), - GRP_MUX("exin1", EXIN, pins_exin1), -@@ -338,24 +293,6 @@ static const struct ltq_pin_group xway_g - GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2), - }; - --static const struct ltq_pin_group ase_grps[] = { -- GRP_MUX("exin0", EXIN, ase_pins_exin0), -- GRP_MUX("exin1", EXIN, ase_pins_exin1), -- GRP_MUX("exin2", EXIN, ase_pins_exin2), -- GRP_MUX("jtag", JTAG, ase_pins_jtag), -- GRP_MUX("stp", STP, ase_pins_stp), -- GRP_MUX("asc", ASC, ase_pins_asc), -- GRP_MUX("gpt1", GPT, ase_pins_gpt1), -- GRP_MUX("gpt2", GPT, ase_pins_gpt2), -- GRP_MUX("gpt3", GPT, ase_pins_gpt3), -- GRP_MUX("ephy", EPHY, ase_pins_ephy), -- GRP_MUX("dfe", DFE, ase_pins_dfe), -- GRP_MUX("spi", SPI, ase_pins_spi), -- GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), -- GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), -- GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), --}; -- - static const char * const xway_pci_grps[] = {"gnt1", "gnt2", - "gnt3", "req1", - "req2", "req3"}; -@@ -395,30 +332,6 @@ static const char * const xrx_pci_grps[] - "req1", "req2", - "req3", "req4"}; - --/* ase */ --static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; --static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; --static const char * const ase_dfe_grps[] = {"dfe"}; --static const char * const ase_ephy_grps[] = {"ephy"}; --static const char * const ase_asc_grps[] = {"asc"}; --static const char * const ase_jtag_grps[] = {"jtag"}; --static const char * const ase_stp_grps[] = {"stp"}; --static const char * const ase_spi_grps[] = {"spi", "spi_cs1", -- "spi_cs2", "spi_cs3"}; -- --static const struct ltq_pmx_func danube_funcs[] = { -- {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, -- {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, -- {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, -- {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, -- {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, -- {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, -- {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, -- {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, -- {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, -- {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, --}; -- - static const struct ltq_pmx_func xrx_funcs[] = { - {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, - {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, -@@ -434,17 +347,991 @@ static const struct ltq_pmx_func xrx_fun - {"gphy", ARRAY_AND_SIZE(xrx_gphy_grps)}, - }; - -+/* --------- ase related code --------- */ -+#define ASE_MAX_PIN 32 -+ -+static const struct ltq_mfp_pin ase_mfp[] = { -+ /* pin f0 f1 f2 f3 */ -+ MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), -+ MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), -+ MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), -+ MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), -+ MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), -+ MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), -+ MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), -+ MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), -+ MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), -+ MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), -+ MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), -+ MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), -+ MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), -+ MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), -+ MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), -+ MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), -+ MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), -+ MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), -+ MFP_XWAY(GPIO21, GPIO, EBU, MII, EBU2), -+ MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), -+ MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), -+ MFP_XWAY(GPIO24, GPIO, EBU, EBU2, MDIO), -+ MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), -+ MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), -+ MFP_XWAY(GPIO27, GPIO, EBU, NONE, MDIO), -+ MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), -+ MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), -+ MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), -+}; -+ -+static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0}; -+ -+static const unsigned ase_pins_exin0[] = {GPIO6}; -+static const unsigned ase_pins_exin1[] = {GPIO29}; -+static const unsigned ase_pins_exin2[] = {GPIO0}; -+ -+static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; -+static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; -+static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; -+static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27}; -+static const unsigned ase_pins_ephy_led0[] = {GPIO2}; -+static const unsigned ase_pins_ephy_led1[] = {GPIO3}; -+static const unsigned ase_pins_ephy_led2[] = {GPIO4}; -+static const unsigned ase_pins_dfe_led0[] = {GPIO1}; -+static const unsigned ase_pins_dfe_led1[] = {GPIO2}; -+ -+static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */ -+static const unsigned ase_pins_spi_di[] = {GPIO8}; -+static const unsigned ase_pins_spi_do[] = {GPIO9}; -+static const unsigned ase_pins_spi_clk[] = {GPIO10}; -+static const unsigned ase_pins_spi_cs1[] = {GPIO7}; -+static const unsigned ase_pins_spi_cs2[] = {GPIO15}; -+static const unsigned ase_pins_spi_cs3[] = {GPIO14}; -+ -+static const unsigned ase_pins_gpt1[] = {GPIO5}; -+static const unsigned ase_pins_gpt2[] = {GPIO4}; -+static const unsigned ase_pins_gpt3[] = {GPIO25}; -+ -+static const unsigned ase_pins_clkout0[] = {GPIO23}; -+static const unsigned ase_pins_clkout1[] = {GPIO22}; -+static const unsigned ase_pins_clkout2[] = {GPIO14}; -+ -+static const struct ltq_pin_group ase_grps[] = { -+ GRP_MUX("exin0", EXIN, ase_pins_exin0), -+ GRP_MUX("exin1", EXIN, ase_pins_exin1), -+ GRP_MUX("exin2", EXIN, ase_pins_exin2), -+ GRP_MUX("jtag", JTAG, ase_pins_jtag), -+ GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */ -+ GRP_MUX("spi_di", SPI, ase_pins_spi_di), -+ GRP_MUX("spi_do", SPI, ase_pins_spi_do), -+ GRP_MUX("spi_clk", SPI, ase_pins_spi_clk), -+ GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), -+ GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), -+ GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), -+ GRP_MUX("asc", ASC, ase_pins_asc), -+ GRP_MUX("stp", STP, ase_pins_stp), -+ GRP_MUX("gpt1", GPT, ase_pins_gpt1), -+ GRP_MUX("gpt2", GPT, ase_pins_gpt2), -+ GRP_MUX("gpt3", GPT, ase_pins_gpt3), -+ GRP_MUX("clkout0", CGU, ase_pins_clkout0), -+ GRP_MUX("clkout1", CGU, ase_pins_clkout1), -+ GRP_MUX("clkout2", CGU, ase_pins_clkout2), -+ GRP_MUX("mdio", MDIO, ase_pins_mdio), -+ GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0), -+ GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1), -+ GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0), -+ GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1), -+ GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2), -+}; -+ -+static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; -+static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -+static const char * const ase_cgu_grps[] = {"clkout0", "clkout1", -+ "clkout2"}; -+static const char * const ase_mdio_grps[] = {"mdio"}; -+static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"}; -+static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1", -+ "ephy led2"}; -+static const char * const ase_asc_grps[] = {"asc"}; -+static const char * const ase_jtag_grps[] = {"jtag"}; -+static const char * const ase_stp_grps[] = {"stp"}; -+static const char * const ase_spi_grps[] = {"spi", /* DEPRECATED */ -+ "spi_di", "spi_do", -+ "spi_clk", "spi_cs1", -+ "spi_cs2", "spi_cs3"}; -+ - static const struct ltq_pmx_func ase_funcs[] = { - {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, - {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, -+ {"cgu", ARRAY_AND_SIZE(ase_cgu_grps)}, - {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, - {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, - {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, - {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, -+ {"mdio", ARRAY_AND_SIZE(ase_mdio_grps)}, - {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, - {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, - }; - -+/* --------- danube related code --------- */ -+#define DANUBE_MAX_PIN 32 -+ -+static const struct ltq_mfp_pin danube_mfp[] = { -+ /* pin f0 f1 f2 f3 */ -+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), -+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, MII), -+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII), -+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), -+ MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), -+ MFP_XWAY(GPIO5, GPIO, STP, MII, DFE), -+ MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), -+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, MII), -+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, MII), -+ MFP_XWAY(GPIO9, GPIO, ASC, SPI, MII), -+ MFP_XWAY(GPIO10, GPIO, ASC, SPI, MII), -+ MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), -+ MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), -+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, MII), -+ MFP_XWAY(GPIO14, GPIO, CGU, CBUS, MII), -+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, JTAG), -+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, JTAG), -+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, JTAG), -+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, JTAG), -+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, MII), -+ MFP_XWAY(GPIO20, GPIO, JTAG, SDIO, MII), -+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), -+ MFP_XWAY(GPIO22, GPIO, SPI, MCD, MII), -+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), -+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), -+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), -+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), -+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), -+ MFP_XWAY(GPIO28, GPIO, GPT, MII, SDIO), -+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, MII), -+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, MII), -+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, MII), -+}; -+ -+static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2}; -+ -+static const unsigned danube_pins_exin0[] = {GPIO0}; -+static const unsigned danube_pins_exin1[] = {GPIO1}; -+static const unsigned danube_pins_exin2[] = {GPIO2}; -+ -+static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20}; -+static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12}; -+static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; -+static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6}; -+static const unsigned danube_pins_nmi[] = {GPIO8}; -+ -+static const unsigned danube_pins_dfe_led0[] = {GPIO4}; -+static const unsigned danube_pins_dfe_led1[] = {GPIO5}; -+ -+static const unsigned danube_pins_ebu_a24[] = {GPIO13}; -+static const unsigned danube_pins_ebu_clk[] = {GPIO21}; -+static const unsigned danube_pins_ebu_cs1[] = {GPIO23}; -+static const unsigned danube_pins_ebu_a23[] = {GPIO24}; -+static const unsigned danube_pins_ebu_wait[] = {GPIO26}; -+static const unsigned danube_pins_ebu_a25[] = {GPIO31}; -+ -+static const unsigned danube_pins_nand_ale[] = {GPIO13}; -+static const unsigned danube_pins_nand_cs1[] = {GPIO23}; -+static const unsigned danube_pins_nand_cle[] = {GPIO24}; -+ -+static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */ -+static const unsigned danube_pins_spi_di[] = {GPIO16}; -+static const unsigned danube_pins_spi_do[] = {GPIO17}; -+static const unsigned danube_pins_spi_clk[] = {GPIO18}; -+static const unsigned danube_pins_spi_cs1[] = {GPIO15}; -+static const unsigned danube_pins_spi_cs2[] = {GPIO21}; -+static const unsigned danube_pins_spi_cs3[] = {GPIO13}; -+static const unsigned danube_pins_spi_cs4[] = {GPIO10}; -+static const unsigned danube_pins_spi_cs5[] = {GPIO9}; -+static const unsigned danube_pins_spi_cs6[] = {GPIO11}; -+ -+static const unsigned danube_pins_gpt1[] = {GPIO28}; -+static const unsigned danube_pins_gpt2[] = {GPIO21}; -+static const unsigned danube_pins_gpt3[] = {GPIO6}; -+ -+static const unsigned danube_pins_clkout0[] = {GPIO8}; -+static const unsigned danube_pins_clkout1[] = {GPIO7}; -+static const unsigned danube_pins_clkout2[] = {GPIO3}; -+static const unsigned danube_pins_clkout3[] = {GPIO2}; -+ -+static const unsigned danube_pins_pci_gnt1[] = {GPIO30}; -+static const unsigned danube_pins_pci_gnt2[] = {GPIO23}; -+static const unsigned danube_pins_pci_gnt3[] = {GPIO19}; -+static const unsigned danube_pins_pci_req1[] = {GPIO29}; -+static const unsigned danube_pins_pci_req2[] = {GPIO31}; -+static const unsigned danube_pins_pci_req3[] = {GPIO3}; -+ -+static const struct ltq_pin_group danube_grps[] = { -+ GRP_MUX("exin0", EXIN, danube_pins_exin0), -+ GRP_MUX("exin1", EXIN, danube_pins_exin1), -+ GRP_MUX("exin2", EXIN, danube_pins_exin2), -+ GRP_MUX("jtag", JTAG, danube_pins_jtag), -+ GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23), -+ GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24), -+ GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25), -+ GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk), -+ GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1), -+ GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait), -+ GRP_MUX("nand ale", EBU, danube_pins_nand_ale), -+ GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1), -+ GRP_MUX("nand cle", EBU, danube_pins_nand_cle), -+ GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */ -+ GRP_MUX("spi_di", SPI, danube_pins_spi_di), -+ GRP_MUX("spi_do", SPI, danube_pins_spi_do), -+ GRP_MUX("spi_clk", SPI, danube_pins_spi_clk), -+ GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1), -+ GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2), -+ GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3), -+ GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4), -+ GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5), -+ GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6), -+ GRP_MUX("asc0", ASC, danube_pins_asc0), -+ GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts), -+ GRP_MUX("stp", STP, danube_pins_stp), -+ GRP_MUX("nmi", NMI, danube_pins_nmi), -+ GRP_MUX("gpt1", GPT, danube_pins_gpt1), -+ GRP_MUX("gpt2", GPT, danube_pins_gpt2), -+ GRP_MUX("gpt3", GPT, danube_pins_gpt3), -+ GRP_MUX("clkout0", CGU, danube_pins_clkout0), -+ GRP_MUX("clkout1", CGU, danube_pins_clkout1), -+ GRP_MUX("clkout2", CGU, danube_pins_clkout2), -+ GRP_MUX("clkout3", CGU, danube_pins_clkout3), -+ GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1), -+ GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2), -+ GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3), -+ GRP_MUX("req1", PCI, danube_pins_pci_req1), -+ GRP_MUX("req2", PCI, danube_pins_pci_req2), -+ GRP_MUX("req3", PCI, danube_pins_pci_req3), -+ GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0), -+ GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1), -+}; -+ -+static const char * const danube_pci_grps[] = {"gnt1", "gnt2", -+ "gnt3", "req1", -+ "req2", "req3"}; -+static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */ -+ "spi_di", "spi_do", -+ "spi_clk", "spi_cs1", -+ "spi_cs2", "spi_cs3", -+ "spi_cs4", "spi_cs5", -+ "spi_cs6"}; -+static const char * const danube_cgu_grps[] = {"clkout0", "clkout1", -+ "clkout2", "clkout3"}; -+static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24", -+ "ebu a25", "ebu cs1", -+ "ebu wait", "ebu clk", -+ "nand ale", "nand cs1", -+ "nand cle"}; -+static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"}; -+static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"}; -+static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -+static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"}; -+static const char * const danube_jtag_grps[] = {"jtag"}; -+static const char * const danube_stp_grps[] = {"stp"}; -+static const char * const danube_nmi_grps[] = {"nmi"}; -+ -+static const struct ltq_pmx_func danube_funcs[] = { -+ {"spi", ARRAY_AND_SIZE(danube_spi_grps)}, -+ {"asc", ARRAY_AND_SIZE(danube_asc_grps)}, -+ {"cgu", ARRAY_AND_SIZE(danube_cgu_grps)}, -+ {"jtag", ARRAY_AND_SIZE(danube_jtag_grps)}, -+ {"exin", ARRAY_AND_SIZE(danube_exin_grps)}, -+ {"stp", ARRAY_AND_SIZE(danube_stp_grps)}, -+ {"gpt", ARRAY_AND_SIZE(danube_gpt_grps)}, -+ {"nmi", ARRAY_AND_SIZE(danube_nmi_grps)}, -+ {"pci", ARRAY_AND_SIZE(danube_pci_grps)}, -+ {"ebu", ARRAY_AND_SIZE(danube_ebu_grps)}, -+ {"dfe", ARRAY_AND_SIZE(danube_dfe_grps)}, -+}; -+ -+/* --------- xrx100 related code --------- */ -+#define XRX100_MAX_PIN 56 -+ -+static const struct ltq_mfp_pin xrx100_mfp[] = { -+ /* pin f0 f1 f2 f3 */ -+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), -+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), -+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), -+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), -+ MFP_XWAY(GPIO4, GPIO, STP, DFE, ASC), -+ MFP_XWAY(GPIO5, GPIO, STP, NONE, DFE), -+ MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), -+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, NONE), -+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), -+ MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), -+ MFP_XWAY(GPIO10, GPIO, ASC, SPI, EXIN), -+ MFP_XWAY(GPIO11, GPIO, ASC, CBUS, SPI), -+ MFP_XWAY(GPIO12, GPIO, ASC, CBUS, MCD), -+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), -+ MFP_XWAY(GPIO14, GPIO, CGU, NONE, NONE), -+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), -+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), -+ MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), -+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), -+ MFP_XWAY(GPIO22, GPIO, SPI, NONE, EBU), -+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), -+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), -+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, ASC), -+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), -+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, ASC), -+ MFP_XWAY(GPIO28, GPIO, GPT, NONE, SDIO), -+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, NONE), -+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), -+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), -+ MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), -+ MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), -+ MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), -+ MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), -+ MFP_XWAY(GPIO36, GPIO, SIN, SSI, NONE), -+ MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), -+ MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), -+ MFP_XWAY(GPIO39, GPIO, NONE, EXIN, NONE), -+ MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), -+ MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), -+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO44, GPIO, MII, SIN, NONE), -+ MFP_XWAY(GPIO45, GPIO, MII, NONE, SIN), -+ MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), -+ MFP_XWAY(GPIO47, GPIO, MII, NONE, SIN), -+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), -+ MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), -+}; -+ -+static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; -+ -+static const unsigned xrx100_pins_exin0[] = {GPIO0}; -+static const unsigned xrx100_pins_exin1[] = {GPIO1}; -+static const unsigned xrx100_pins_exin2[] = {GPIO2}; -+static const unsigned xrx100_pins_exin3[] = {GPIO39}; -+static const unsigned xrx100_pins_exin4[] = {GPIO10}; -+static const unsigned xrx100_pins_exin5[] = {GPIO9}; -+ -+static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12}; -+static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10}; -+static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6}; -+static const unsigned xrx100_pins_nmi[] = {GPIO8}; -+static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43}; -+ -+static const unsigned xrx100_pins_dfe_led0[] = {GPIO4}; -+static const unsigned xrx100_pins_dfe_led1[] = {GPIO5}; -+ -+static const unsigned xrx100_pins_ebu_a24[] = {GPIO13}; -+static const unsigned xrx100_pins_ebu_clk[] = {GPIO21}; -+static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23}; -+static const unsigned xrx100_pins_ebu_a23[] = {GPIO24}; -+static const unsigned xrx100_pins_ebu_wait[] = {GPIO26}; -+static const unsigned xrx100_pins_ebu_a25[] = {GPIO31}; -+ -+static const unsigned xrx100_pins_nand_ale[] = {GPIO13}; -+static const unsigned xrx100_pins_nand_cs1[] = {GPIO23}; -+static const unsigned xrx100_pins_nand_cle[] = {GPIO24}; -+static const unsigned xrx100_pins_nand_rdy[] = {GPIO48}; -+static const unsigned xrx100_pins_nand_rd[] = {GPIO49}; -+ -+static const unsigned xrx100_pins_spi_di[] = {GPIO16}; -+static const unsigned xrx100_pins_spi_do[] = {GPIO17}; -+static const unsigned xrx100_pins_spi_clk[] = {GPIO18}; -+static const unsigned xrx100_pins_spi_cs1[] = {GPIO15}; -+static const unsigned xrx100_pins_spi_cs2[] = {GPIO22}; -+static const unsigned xrx100_pins_spi_cs3[] = {GPIO13}; -+static const unsigned xrx100_pins_spi_cs4[] = {GPIO10}; -+static const unsigned xrx100_pins_spi_cs5[] = {GPIO9}; -+static const unsigned xrx100_pins_spi_cs6[] = {GPIO11}; -+ -+static const unsigned xrx100_pins_gpt1[] = {GPIO28}; -+static const unsigned xrx100_pins_gpt2[] = {GPIO21}; -+static const unsigned xrx100_pins_gpt3[] = {GPIO6}; -+ -+static const unsigned xrx100_pins_clkout0[] = {GPIO8}; -+static const unsigned xrx100_pins_clkout1[] = {GPIO7}; -+static const unsigned xrx100_pins_clkout2[] = {GPIO3}; -+static const unsigned xrx100_pins_clkout3[] = {GPIO2}; -+ -+static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30}; -+static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23}; -+static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19}; -+static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38}; -+static const unsigned xrx100_pins_pci_req1[] = {GPIO29}; -+static const unsigned xrx100_pins_pci_req2[] = {GPIO31}; -+static const unsigned xrx100_pins_pci_req3[] = {GPIO3}; -+static const unsigned xrx100_pins_pci_req4[] = {GPIO37}; -+ -+static const struct ltq_pin_group xrx100_grps[] = { -+ GRP_MUX("exin0", EXIN, xrx100_pins_exin0), -+ GRP_MUX("exin1", EXIN, xrx100_pins_exin1), -+ GRP_MUX("exin2", EXIN, xrx100_pins_exin2), -+ GRP_MUX("exin3", EXIN, xrx100_pins_exin3), -+ GRP_MUX("exin4", EXIN, xrx100_pins_exin4), -+ GRP_MUX("exin5", EXIN, xrx100_pins_exin5), -+ GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23), -+ GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24), -+ GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25), -+ GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk), -+ GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1), -+ GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait), -+ GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale), -+ GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1), -+ GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle), -+ GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy), -+ GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd), -+ GRP_MUX("spi_di", SPI, xrx100_pins_spi_di), -+ GRP_MUX("spi_do", SPI, xrx100_pins_spi_do), -+ GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk), -+ GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1), -+ GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2), -+ GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3), -+ GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4), -+ GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5), -+ GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6), -+ GRP_MUX("asc0", ASC, xrx100_pins_asc0), -+ GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts), -+ GRP_MUX("stp", STP, xrx100_pins_stp), -+ GRP_MUX("nmi", NMI, xrx100_pins_nmi), -+ GRP_MUX("gpt1", GPT, xrx100_pins_gpt1), -+ GRP_MUX("gpt2", GPT, xrx100_pins_gpt2), -+ GRP_MUX("gpt3", GPT, xrx100_pins_gpt3), -+ GRP_MUX("clkout0", CGU, xrx100_pins_clkout0), -+ GRP_MUX("clkout1", CGU, xrx100_pins_clkout1), -+ GRP_MUX("clkout2", CGU, xrx100_pins_clkout2), -+ GRP_MUX("clkout3", CGU, xrx100_pins_clkout3), -+ GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1), -+ GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2), -+ GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3), -+ GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4), -+ GRP_MUX("req1", PCI, xrx100_pins_pci_req1), -+ GRP_MUX("req2", PCI, xrx100_pins_pci_req2), -+ GRP_MUX("req3", PCI, xrx100_pins_pci_req3), -+ GRP_MUX("req4", PCI, xrx100_pins_pci_req4), -+ GRP_MUX("mdio", MDIO, xrx100_pins_mdio), -+ GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0), -+ GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1), -+}; -+ -+static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2", -+ "gnt3", "gnt4", -+ "req1", "req2", -+ "req3", "req4"}; -+static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do", -+ "spi_clk", "spi_cs1", -+ "spi_cs2", "spi_cs3", -+ "spi_cs4", "spi_cs5", -+ "spi_cs6"}; -+static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1", -+ "clkout2", "clkout3"}; -+static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24", -+ "ebu a25", "ebu cs1", -+ "ebu wait", "ebu clk", -+ "nand ale", "nand cs1", -+ "nand cle", "nand rdy", -+ "nand rd"}; -+static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2", -+ "exin3", "exin4", "exin5"}; -+static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -+static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"}; -+static const char * const xrx100_stp_grps[] = {"stp"}; -+static const char * const xrx100_nmi_grps[] = {"nmi"}; -+static const char * const xrx100_mdio_grps[] = {"mdio"}; -+static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"}; -+ -+static const struct ltq_pmx_func xrx100_funcs[] = { -+ {"spi", ARRAY_AND_SIZE(xrx100_spi_grps)}, -+ {"asc", ARRAY_AND_SIZE(xrx100_asc_grps)}, -+ {"cgu", ARRAY_AND_SIZE(xrx100_cgu_grps)}, -+ {"exin", ARRAY_AND_SIZE(xrx100_exin_grps)}, -+ {"stp", ARRAY_AND_SIZE(xrx100_stp_grps)}, -+ {"gpt", ARRAY_AND_SIZE(xrx100_gpt_grps)}, -+ {"nmi", ARRAY_AND_SIZE(xrx100_nmi_grps)}, -+ {"pci", ARRAY_AND_SIZE(xrx100_pci_grps)}, -+ {"ebu", ARRAY_AND_SIZE(xrx100_ebu_grps)}, -+ {"mdio", ARRAY_AND_SIZE(xrx100_mdio_grps)}, -+ {"dfe", ARRAY_AND_SIZE(xrx100_dfe_grps)}, -+}; -+ -+/* --------- xrx200 related code --------- */ -+#define XRX200_MAX_PIN 50 -+ -+static const struct ltq_mfp_pin xrx200_mfp[] = { -+ /* pin f0 f1 f2 f3 */ -+ MFP_XWAY(GPIO0, GPIO, EXIN, SDIO, TDM), -+ MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN), -+ MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY), -+ MFP_XWAY(GPIO3, GPIO, CGU, SDIO, PCI), -+ MFP_XWAY(GPIO4, GPIO, STP, DFE, USIF), -+ MFP_XWAY(GPIO5, GPIO, STP, GPHY, DFE), -+ MFP_XWAY(GPIO6, GPIO, STP, GPT, USIF), -+ MFP_XWAY(GPIO7, GPIO, CGU, CBUS, GPHY), -+ MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), -+ MFP_XWAY(GPIO9, GPIO, USIF, SPI, EXIN), -+ MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), -+ MFP_XWAY(GPIO11, GPIO, USIF, CBUS, SPI), -+ MFP_XWAY(GPIO12, GPIO, USIF, CBUS, MCD), -+ MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), -+ MFP_XWAY(GPIO14, GPIO, CGU, CBUS, USIF), -+ MFP_XWAY(GPIO15, GPIO, SPI, SDIO, MCD), -+ MFP_XWAY(GPIO16, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO17, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO18, GPIO, SPI, SDIO, NONE), -+ MFP_XWAY(GPIO19, GPIO, PCI, SDIO, CGU), -+ MFP_XWAY(GPIO20, GPIO, NONE, SDIO, EBU), -+ MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), -+ MFP_XWAY(GPIO22, GPIO, SPI, CGU, EBU), -+ MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), -+ MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), -+ MFP_XWAY(GPIO25, GPIO, TDM, SDIO, USIF), -+ MFP_XWAY(GPIO26, GPIO, EBU, TDM, SDIO), -+ MFP_XWAY(GPIO27, GPIO, TDM, SDIO, USIF), -+ MFP_XWAY(GPIO28, GPIO, GPT, PCI, SDIO), -+ MFP_XWAY(GPIO29, GPIO, PCI, CBUS, EXIN), -+ MFP_XWAY(GPIO30, GPIO, PCI, CBUS, NONE), -+ MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), -+ MFP_XWAY(GPIO32, GPIO, MII, NONE, EBU), -+ MFP_XWAY(GPIO33, GPIO, MII, NONE, EBU), -+ MFP_XWAY(GPIO34, GPIO, SIN, SSI, NONE), -+ MFP_XWAY(GPIO35, GPIO, SIN, SSI, NONE), -+ MFP_XWAY(GPIO36, GPIO, SIN, SSI, EXIN), -+ MFP_XWAY(GPIO37, GPIO, USIF, NONE, PCI), -+ MFP_XWAY(GPIO38, GPIO, PCI, USIF, NONE), -+ MFP_XWAY(GPIO39, GPIO, USIF, EXIN, NONE), -+ MFP_XWAY(GPIO40, GPIO, MII, TDM, NONE), -+ MFP_XWAY(GPIO41, GPIO, MII, TDM, NONE), -+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY), -+ MFP_XWAY(GPIO45, GPIO, MII, GPHY, SIN), -+ MFP_XWAY(GPIO46, GPIO, MII, NONE, EXIN), -+ MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN), -+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), -+}; -+ -+static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9}; -+ -+static const unsigned xrx200_pins_exin0[] = {GPIO0}; -+static const unsigned xrx200_pins_exin1[] = {GPIO1}; -+static const unsigned xrx200_pins_exin2[] = {GPIO2}; -+static const unsigned xrx200_pins_exin3[] = {GPIO39}; -+static const unsigned xrx200_pins_exin4[] = {GPIO10}; -+static const unsigned xrx200_pins_exin5[] = {GPIO9}; -+ -+static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11}; -+static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12}; -+static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9}; -+static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10}; -+static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4}; -+static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6}; -+static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25}; -+static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27}; -+ -+static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11}; -+static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12}; -+static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38}; -+static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37}; -+static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39}; -+static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14}; -+ -+static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6}; -+static const unsigned xrx200_pins_nmi[] = {GPIO8}; -+static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43}; -+ -+static const unsigned xrx200_pins_dfe_led0[] = {GPIO4}; -+static const unsigned xrx200_pins_dfe_led1[] = {GPIO5}; -+ -+static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5}; -+static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7}; -+static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2}; -+static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44}; -+static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45}; -+static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47}; -+ -+static const unsigned xrx200_pins_ebu_a24[] = {GPIO13}; -+static const unsigned xrx200_pins_ebu_clk[] = {GPIO21}; -+static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23}; -+static const unsigned xrx200_pins_ebu_a23[] = {GPIO24}; -+static const unsigned xrx200_pins_ebu_wait[] = {GPIO26}; -+static const unsigned xrx200_pins_ebu_a25[] = {GPIO31}; -+ -+static const unsigned xrx200_pins_nand_ale[] = {GPIO13}; -+static const unsigned xrx200_pins_nand_cs1[] = {GPIO23}; -+static const unsigned xrx200_pins_nand_cle[] = {GPIO24}; -+static const unsigned xrx200_pins_nand_rdy[] = {GPIO48}; -+static const unsigned xrx200_pins_nand_rd[] = {GPIO49}; -+ -+static const unsigned xrx200_pins_spi_di[] = {GPIO16}; -+static const unsigned xrx200_pins_spi_do[] = {GPIO17}; -+static const unsigned xrx200_pins_spi_clk[] = {GPIO18}; -+static const unsigned xrx200_pins_spi_cs1[] = {GPIO15}; -+static const unsigned xrx200_pins_spi_cs2[] = {GPIO22}; -+static const unsigned xrx200_pins_spi_cs3[] = {GPIO13}; -+static const unsigned xrx200_pins_spi_cs4[] = {GPIO10}; -+static const unsigned xrx200_pins_spi_cs5[] = {GPIO9}; -+static const unsigned xrx200_pins_spi_cs6[] = {GPIO11}; -+ -+static const unsigned xrx200_pins_gpt1[] = {GPIO28}; -+static const unsigned xrx200_pins_gpt2[] = {GPIO21}; -+static const unsigned xrx200_pins_gpt3[] = {GPIO6}; -+ -+static const unsigned xrx200_pins_clkout0[] = {GPIO8}; -+static const unsigned xrx200_pins_clkout1[] = {GPIO7}; -+static const unsigned xrx200_pins_clkout2[] = {GPIO3}; -+static const unsigned xrx200_pins_clkout3[] = {GPIO2}; -+ -+static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28}; -+static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23}; -+static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19}; -+static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38}; -+static const unsigned xrx200_pins_pci_req1[] = {GPIO29}; -+static const unsigned xrx200_pins_pci_req2[] = {GPIO31}; -+static const unsigned xrx200_pins_pci_req3[] = {GPIO3}; -+static const unsigned xrx200_pins_pci_req4[] = {GPIO37}; -+ -+static const struct ltq_pin_group xrx200_grps[] = { -+ GRP_MUX("exin0", EXIN, xrx200_pins_exin0), -+ GRP_MUX("exin1", EXIN, xrx200_pins_exin1), -+ GRP_MUX("exin2", EXIN, xrx200_pins_exin2), -+ GRP_MUX("exin3", EXIN, xrx200_pins_exin3), -+ GRP_MUX("exin4", EXIN, xrx200_pins_exin4), -+ GRP_MUX("exin5", EXIN, xrx200_pins_exin5), -+ GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23), -+ GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24), -+ GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25), -+ GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk), -+ GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1), -+ GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait), -+ GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale), -+ GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1), -+ GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle), -+ GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy), -+ GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd), -+ GRP_MUX("spi_di", SPI, xrx200_pins_spi_di), -+ GRP_MUX("spi_do", SPI, xrx200_pins_spi_do), -+ GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk), -+ GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1), -+ GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2), -+ GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3), -+ GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4), -+ GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5), -+ GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6), -+ GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx), -+ GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx), -+ GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts), -+ GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts), -+ GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr), -+ GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr), -+ GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd), -+ GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri), -+ GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di), -+ GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do), -+ GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk), -+ GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0), -+ GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1), -+ GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2), -+ GRP_MUX("stp", STP, xrx200_pins_stp), -+ GRP_MUX("nmi", NMI, xrx200_pins_nmi), -+ GRP_MUX("gpt1", GPT, xrx200_pins_gpt1), -+ GRP_MUX("gpt2", GPT, xrx200_pins_gpt2), -+ GRP_MUX("gpt3", GPT, xrx200_pins_gpt3), -+ GRP_MUX("clkout0", CGU, xrx200_pins_clkout0), -+ GRP_MUX("clkout1", CGU, xrx200_pins_clkout1), -+ GRP_MUX("clkout2", CGU, xrx200_pins_clkout2), -+ GRP_MUX("clkout3", CGU, xrx200_pins_clkout3), -+ GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1), -+ GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2), -+ GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3), -+ GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4), -+ GRP_MUX("req1", PCI, xrx200_pins_pci_req1), -+ GRP_MUX("req2", PCI, xrx200_pins_pci_req2), -+ GRP_MUX("req3", PCI, xrx200_pins_pci_req3), -+ GRP_MUX("req4", PCI, xrx200_pins_pci_req4), -+ GRP_MUX("mdio", MDIO, xrx200_pins_mdio), -+ GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0), -+ GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1), -+ GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0), -+ GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1), -+ GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2), -+ GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0), -+ GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1), -+ GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2), -+}; -+ -+static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2", -+ "gnt3", "gnt4", -+ "req1", "req2", -+ "req3", "req4"}; -+static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do", -+ "spi_clk", "spi_cs1", -+ "spi_cs2", "spi_cs3", -+ "spi_cs4", "spi_cs5", -+ "spi_cs6"}; -+static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1", -+ "clkout2", "clkout3"}; -+static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24", -+ "ebu a25", "ebu cs1", -+ "ebu wait", "ebu clk", -+ "nand ale", "nand cs1", -+ "nand cle", "nand rdy", -+ "nand rd"}; -+static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2", -+ "exin3", "exin4", "exin5"}; -+static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; -+static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx", -+ "usif uart_rts", "usif uart_cts", -+ "usif uart_dtr", "usif uart_dsr", -+ "usif uart_dcd", "usif uart_ri", -+ "usif spi_di", "usif spi_do", -+ "usif spi_clk", "usif spi_cs0", -+ "usif spi_cs1", "usif spi_cs2"}; -+static const char * const xrx200_stp_grps[] = {"stp"}; -+static const char * const xrx200_nmi_grps[] = {"nmi"}; -+static const char * const xrx200_mdio_grps[] = {"mdio"}; -+static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"}; -+static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1", -+ "gphy0 led2", "gphy1 led0", -+ "gphy1 led1", "gphy1 led2"}; -+ -+static const struct ltq_pmx_func xrx200_funcs[] = { -+ {"spi", ARRAY_AND_SIZE(xrx200_spi_grps)}, -+ {"usif", ARRAY_AND_SIZE(xrx200_usif_grps)}, -+ {"cgu", ARRAY_AND_SIZE(xrx200_cgu_grps)}, -+ {"exin", ARRAY_AND_SIZE(xrx200_exin_grps)}, -+ {"stp", ARRAY_AND_SIZE(xrx200_stp_grps)}, -+ {"gpt", ARRAY_AND_SIZE(xrx200_gpt_grps)}, -+ {"nmi", ARRAY_AND_SIZE(xrx200_nmi_grps)}, -+ {"pci", ARRAY_AND_SIZE(xrx200_pci_grps)}, -+ {"ebu", ARRAY_AND_SIZE(xrx200_ebu_grps)}, -+ {"mdio", ARRAY_AND_SIZE(xrx200_mdio_grps)}, -+ {"dfe", ARRAY_AND_SIZE(xrx200_dfe_grps)}, -+ {"gphy", ARRAY_AND_SIZE(xrx200_gphy_grps)}, -+}; -+ -+/* --------- xrx300 related code --------- */ -+#define XRX300_MAX_PIN 64 -+ -+static const struct ltq_mfp_pin xrx300_mfp[] = { -+ /* pin f0 f1 f2 f3 */ -+ MFP_XWAY(GPIO0, GPIO, EXIN, EPHY, NONE), -+ MFP_XWAY(GPIO1, GPIO, NONE, EXIN, NONE), -+ MFP_XWAY(GPIO2, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO3, GPIO, CGU, NONE, NONE), -+ MFP_XWAY(GPIO4, GPIO, STP, DFE, NONE), -+ MFP_XWAY(GPIO5, GPIO, STP, EPHY, DFE), -+ MFP_XWAY(GPIO6, GPIO, STP, NONE, NONE), -+ MFP_XWAY(GPIO7, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO8, GPIO, CGU, GPHY, EPHY), -+ MFP_XWAY(GPIO9, GPIO, WIFI, NONE, EXIN), -+ MFP_XWAY(GPIO10, GPIO, USIF, SPI, EXIN), -+ MFP_XWAY(GPIO11, GPIO, USIF, WIFI, SPI), -+ MFP_XWAY(GPIO12, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO13, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO14, GPIO, CGU, USIF, EPHY), -+ MFP_XWAY(GPIO15, GPIO, SPI, NONE, MCD), -+ MFP_XWAY(GPIO16, GPIO, SPI, EXIN, NONE), -+ MFP_XWAY(GPIO17, GPIO, SPI, NONE, NONE), -+ MFP_XWAY(GPIO18, GPIO, SPI, NONE, NONE), -+ MFP_XWAY(GPIO19, GPIO, USIF, NONE, EPHY), -+ MFP_XWAY(GPIO20, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO21, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO22, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO23, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO24, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO25, GPIO, TDM, NONE, NONE), -+ MFP_XWAY(GPIO26, GPIO, TDM, NONE, NONE), -+ MFP_XWAY(GPIO27, GPIO, TDM, NONE, NONE), -+ MFP_XWAY(GPIO28, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO29, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO30, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO31, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO32, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO33, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO34, GPIO, NONE, SSI, NONE), -+ MFP_XWAY(GPIO35, GPIO, NONE, SSI, NONE), -+ MFP_XWAY(GPIO36, GPIO, NONE, SSI, NONE), -+ MFP_XWAY(GPIO37, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO38, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO39, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO40, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO41, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), -+ MFP_XWAY(GPIO44, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO45, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO46, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO47, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO50, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO51, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO52, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO53, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO54, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO55, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO56, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO57, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO58, GPIO, EBU, TDM, NONE), -+ MFP_XWAY(GPIO59, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO60, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO61, GPIO, EBU, NONE, NONE), -+ MFP_XWAY(GPIO62, NONE, NONE, NONE, NONE), -+ MFP_XWAY(GPIO63, NONE, NONE, NONE, NONE), -+}; -+ -+static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9}; -+ -+static const unsigned xrx300_pins_exin0[] = {GPIO0}; -+static const unsigned xrx300_pins_exin1[] = {GPIO1}; -+static const unsigned xrx300_pins_exin2[] = {GPIO16}; -+/* EXIN3 is not available on xrX300 */ -+static const unsigned xrx300_pins_exin4[] = {GPIO10}; -+static const unsigned xrx300_pins_exin5[] = {GPIO9}; -+ -+static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11}; -+static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10}; -+ -+static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11}; -+static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10}; -+static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19}; -+static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14}; -+ -+static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6}; -+static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43}; -+ -+static const unsigned xrx300_pins_dfe_led0[] = {GPIO4}; -+static const unsigned xrx300_pins_dfe_led1[] = {GPIO5}; -+ -+static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5}; -+static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8}; -+static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14}; -+static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19}; -+ -+static const unsigned xrx300_pins_nand_ale[] = {GPIO13}; -+static const unsigned xrx300_pins_nand_cs1[] = {GPIO23}; -+static const unsigned xrx300_pins_nand_cle[] = {GPIO24}; -+static const unsigned xrx300_pins_nand_rdy[] = {GPIO48}; -+static const unsigned xrx300_pins_nand_rd[] = {GPIO49}; -+static const unsigned xrx300_pins_nand_d1[] = {GPIO50}; -+static const unsigned xrx300_pins_nand_d0[] = {GPIO51}; -+static const unsigned xrx300_pins_nand_d2[] = {GPIO52}; -+static const unsigned xrx300_pins_nand_d7[] = {GPIO53}; -+static const unsigned xrx300_pins_nand_d6[] = {GPIO54}; -+static const unsigned xrx300_pins_nand_d5[] = {GPIO55}; -+static const unsigned xrx300_pins_nand_d4[] = {GPIO56}; -+static const unsigned xrx300_pins_nand_d3[] = {GPIO57}; -+static const unsigned xrx300_pins_nand_cs0[] = {GPIO58}; -+static const unsigned xrx300_pins_nand_wr[] = {GPIO59}; -+static const unsigned xrx300_pins_nand_wp[] = {GPIO60}; -+static const unsigned xrx300_pins_nand_se[] = {GPIO61}; -+ -+static const unsigned xrx300_pins_spi_di[] = {GPIO16}; -+static const unsigned xrx300_pins_spi_do[] = {GPIO17}; -+static const unsigned xrx300_pins_spi_clk[] = {GPIO18}; -+static const unsigned xrx300_pins_spi_cs1[] = {GPIO15}; -+/* SPI_CS2 is not available on xrX300 */ -+/* SPI_CS3 is not available on xrX300 */ -+static const unsigned xrx300_pins_spi_cs4[] = {GPIO10}; -+/* SPI_CS5 is not available on xrX300 */ -+static const unsigned xrx300_pins_spi_cs6[] = {GPIO11}; -+ -+/* CLKOUT0 is not available on xrX300 */ -+/* CLKOUT1 is not available on xrX300 */ -+static const unsigned xrx300_pins_clkout2[] = {GPIO3}; -+ -+static const struct ltq_pin_group xrx300_grps[] = { -+ GRP_MUX("exin0", EXIN, xrx300_pins_exin0), -+ GRP_MUX("exin1", EXIN, xrx300_pins_exin1), -+ GRP_MUX("exin2", EXIN, xrx300_pins_exin2), -+ GRP_MUX("exin4", EXIN, xrx300_pins_exin4), -+ GRP_MUX("exin5", EXIN, xrx300_pins_exin5), -+ GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale), -+ GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1), -+ GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle), -+ GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy), -+ GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd), -+ GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1), -+ GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0), -+ GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2), -+ GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7), -+ GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6), -+ GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5), -+ GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4), -+ GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3), -+ GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0), -+ GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr), -+ GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp), -+ GRP_MUX("nand se", EBU, xrx300_pins_nand_se), -+ GRP_MUX("spi_di", SPI, xrx300_pins_spi_di), -+ GRP_MUX("spi_do", SPI, xrx300_pins_spi_do), -+ GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk), -+ GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1), -+ GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4), -+ GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6), -+ GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx), -+ GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx), -+ GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di), -+ GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do), -+ GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk), -+ GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0), -+ GRP_MUX("stp", STP, xrx300_pins_stp), -+ GRP_MUX("clkout2", CGU, xrx300_pins_clkout2), -+ GRP_MUX("mdio", MDIO, xrx300_pins_mdio), -+ GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0), -+ GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1), -+ GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0), -+ GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1), -+ GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0), -+ GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1), -+}; -+ -+static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do", -+ "spi_clk", "spi_cs1", -+ "spi_cs4", "spi_cs6"}; -+static const char * const xrx300_cgu_grps[] = {"clkout2"}; -+static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1", -+ "nand cle", "nand rdy", -+ "nand rd", "nand d1", -+ "nand d0", "nand d2", -+ "nand d7", "nand d6", -+ "nand d5", "nand d4", -+ "nand d3", "nand cs0", -+ "nand wr", "nand wp", -+ "nand se"}; -+static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2", -+ "exin4", "exin5"}; -+static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx", -+ "usif spi_di", "usif spi_do", -+ "usif spi_clk", "usif spi_cs0"}; -+static const char * const xrx300_stp_grps[] = {"stp"}; -+static const char * const xrx300_mdio_grps[] = {"mdio"}; -+static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"}; -+static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1", -+ "ephy1 led0", "ephy1 led1"}; -+ -+static const struct ltq_pmx_func xrx300_funcs[] = { -+ {"spi", ARRAY_AND_SIZE(xrx300_spi_grps)}, -+ {"usif", ARRAY_AND_SIZE(xrx300_usif_grps)}, -+ {"cgu", ARRAY_AND_SIZE(xrx300_cgu_grps)}, -+ {"exin", ARRAY_AND_SIZE(xrx300_exin_grps)}, -+ {"stp", ARRAY_AND_SIZE(xrx300_stp_grps)}, -+ {"ebu", ARRAY_AND_SIZE(xrx300_ebu_grps)}, -+ {"mdio", ARRAY_AND_SIZE(xrx300_mdio_grps)}, -+ {"dfe", ARRAY_AND_SIZE(xrx300_dfe_grps)}, -+ {"ephy", ARRAY_AND_SIZE(xrx300_gphy_grps)}, -+}; -+ - /* --------- pinconf related code --------- */ - static int xway_pinconf_get(struct pinctrl_dev *pctldev, - unsigned pin, -@@ -715,10 +1602,7 @@ static struct gpio_chip xway_chip = { - - - /* --------- register the pinctrl layer --------- */ --static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; --static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; -- --static struct pinctrl_xway_soc { -+struct pinctrl_xway_soc { - int pin_count; - const struct ltq_mfp_pin *mfp; - const struct ltq_pin_group *grps; -@@ -727,22 +1611,54 @@ static struct pinctrl_xway_soc { - unsigned int num_funcs; - const unsigned *exin; - unsigned int num_exin; --} soc_cfg[] = { -- /* legacy xway */ -- {XWAY_MAX_PIN, xway_mfp, -- xway_grps, ARRAY_SIZE(xway_grps), -- danube_funcs, ARRAY_SIZE(danube_funcs), -- xway_exin_pin_map, 3}, -- /* xway xr9 series */ -- {XR9_MAX_PIN, xway_mfp, -- xway_grps, ARRAY_SIZE(xway_grps), -- xrx_funcs, ARRAY_SIZE(xrx_funcs), -- xway_exin_pin_map, 6}, -- /* xway ase series */ -- {XWAY_MAX_PIN, ase_mfp, -- ase_grps, ARRAY_SIZE(ase_grps), -- ase_funcs, ARRAY_SIZE(ase_funcs), -- ase_exin_pins_map, 3}, -+}; -+ -+/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */ -+static struct pinctrl_xway_soc xr9_pinctrl = { -+ XR9_MAX_PIN, xway_mfp, -+ xway_grps, ARRAY_SIZE(xway_grps), -+ xrx_funcs, ARRAY_SIZE(xrx_funcs), -+ xway_exin_pin_map, 6 -+}; -+ -+/* XWAY AMAZON Family */ -+static struct pinctrl_xway_soc ase_pinctrl = { -+ ASE_MAX_PIN, ase_mfp, -+ ase_grps, ARRAY_SIZE(ase_grps), -+ ase_funcs, ARRAY_SIZE(ase_funcs), -+ ase_exin_pin_map, 3 -+}; -+ -+/* XWAY DANUBE Family */ -+static struct pinctrl_xway_soc danube_pinctrl = { -+ DANUBE_MAX_PIN, danube_mfp, -+ danube_grps, ARRAY_SIZE(danube_grps), -+ danube_funcs, ARRAY_SIZE(danube_funcs), -+ danube_exin_pin_map, 3 -+}; -+ -+/* XWAY xRX100 Family */ -+static struct pinctrl_xway_soc xrx100_pinctrl = { -+ XRX100_MAX_PIN, xrx100_mfp, -+ xrx100_grps, ARRAY_SIZE(xrx100_grps), -+ xrx100_funcs, ARRAY_SIZE(xrx100_funcs), -+ xrx100_exin_pin_map, 6 -+}; -+ -+/* XWAY xRX200 Family */ -+static struct pinctrl_xway_soc xrx200_pinctrl = { -+ XRX200_MAX_PIN, xrx200_mfp, -+ xrx200_grps, ARRAY_SIZE(xrx200_grps), -+ xrx200_funcs, ARRAY_SIZE(xrx200_funcs), -+ xrx200_exin_pin_map, 6 -+}; -+ -+/* XWAY xRX300 Family */ -+static struct pinctrl_xway_soc xrx300_pinctrl = { -+ XRX300_MAX_PIN, xrx300_mfp, -+ xrx300_grps, ARRAY_SIZE(xrx300_grps), -+ xrx300_funcs, ARRAY_SIZE(xrx300_funcs), -+ xrx300_exin_pin_map, 5 - }; - - static struct pinctrl_gpio_range xway_gpio_range = { -@@ -751,9 +1667,14 @@ static struct pinctrl_gpio_range xway_gp - }; - - static const struct of_device_id xway_match[] = { -- { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, -- { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, -- { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, -+ { .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/ -+ { .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/ -+ { .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/ -+ { .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl}, -+ { .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl}, -+ { .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl}, -+ { .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl}, -+ { .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl}, - {}, - }; - MODULE_DEVICE_TABLE(of, xway_match); -@@ -775,7 +1696,7 @@ static int pinmux_xway_probe(struct plat - if (match) - xway_soc = (const struct pinctrl_xway_soc *) match->data; - else -- xway_soc = &soc_cfg[0]; -+ xway_soc = &danube_pinctrl; - - /* find out how many pads we have */ - xway_chip.ngpio = xway_soc->pin_count; diff --git a/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch b/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch deleted file mode 100644 index a5f92ee58e..0000000000 --- a/target/linux/lantiq/patches-4.4/0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 57b588c950b7e04e0f22393ad439299ba4fda9c3 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Thu, 26 Nov 2015 11:00:09 +0100 -Subject: [PATCH] pinctrl/lantiq: Fix GPIO Setup of GPIO Port3 - -Some special handling of GPIO Port 3 is needed because of -some hardware thingofabob. - -Signed-off-by: John Crispin <blogic@openwrt.org> -Signed-off-by: Martin Schiller <mschiller@tdt.de> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-xway.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -1570,6 +1570,10 @@ static int xway_gpio_dir_out(struct gpio - { - struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); - -+ if (PORT(pin) == PORT3) -+ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); -+ else -+ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); - gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); - xway_gpio_set(chip, pin, val); - diff --git a/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch b/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch deleted file mode 100644 index 78b5cba7f9..0000000000 --- a/target/linux/lantiq/patches-4.4/0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch +++ /dev/null @@ -1,28 +0,0 @@ -From c9f294ff6584782d20b4a766901a9cff7398bb20 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 4 Jan 2016 22:27:57 +0100 -Subject: [PATCH] pinctrl: lantiq: 2 pins have the wrong mux list - -The latest vendor SDK contained this patch. - -Signed-off-by: John Crispin <blogic@openwrt.org> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-xway.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/pinctrl/pinctrl-xway.c -+++ b/drivers/pinctrl/pinctrl-xway.c -@@ -160,10 +160,10 @@ static const struct ltq_mfp_pin xway_mfp - MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), - MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), - MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), -- MFP_XWAY(GPIO44, GPIO, NONE, SIN, GPHY), -+ MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY), - MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN), - MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), -- MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN), -+ MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN), - MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), - MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), - MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), diff --git a/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch b/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch deleted file mode 100644 index 9efa63d35a..0000000000 --- a/target/linux/lantiq/patches-4.4/0047-irq-fixes.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -67,7 +67,7 @@ int gic_present; - #endif - - static int exin_avail; --static struct resource ltq_eiu_irq[MAX_EIU]; -+static u32 ltq_eiu_irq[MAX_EIU]; - static void __iomem *ltq_icu_membase[MAX_IM]; - static void __iomem *ltq_eiu_membase; - static struct irq_domain *ltq_domain; -@@ -76,7 +76,7 @@ static int ltq_perfcount_irq; - int ltq_eiu_get_irq(int exin) - { - if (exin < exin_avail) -- return ltq_eiu_irq[exin].start; -+ return ltq_eiu_irq[exin]; - return -1; - } - -@@ -128,7 +128,7 @@ static int ltq_eiu_settype(struct irq_da - int i; - - for (i = 0; i < MAX_EIU; i++) { -- if (d->hwirq == ltq_eiu_irq[i].start) { -+ if (d->hwirq == ltq_eiu_irq[i]) { - int val = 0; - int edge = 0; - -@@ -176,7 +176,7 @@ static unsigned int ltq_startup_eiu_irq( - - ltq_enable_irq(d); - for (i = 0; i < MAX_EIU; i++) { -- if (d->hwirq == ltq_eiu_irq[i].start) { -+ if (d->hwirq == ltq_eiu_irq[i]) { - /* by default we are low level triggered */ - ltq_eiu_settype(d, IRQF_TRIGGER_LOW); - /* clear all pending */ -@@ -198,7 +198,7 @@ static void ltq_shutdown_eiu_irq(struct - - ltq_disable_irq(d); - for (i = 0; i < MAX_EIU; i++) { -- if (d->hwirq == ltq_eiu_irq[i].start) { -+ if (d->hwirq == ltq_eiu_irq[i]) { - /* disable */ - ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~BIT(i), - LTQ_EIU_EXIN_INEN); -@@ -343,10 +343,10 @@ static int icu_map(struct irq_domain *d, - return 0; - - for (i = 0; i < exin_avail; i++) -- if (hw == ltq_eiu_irq[i].start) -+ if (hw == ltq_eiu_irq[i]) - chip = <q_eiu_type; - -- irq_set_chip_and_handler(hw, chip, handle_level_irq); -+ irq_set_chip_and_handler(irq, chip, handle_level_irq); - - return 0; - } -@@ -441,14 +441,14 @@ int __init icu_of_init(struct device_nod - eiu_node = of_find_compatible_node(NULL, NULL, "lantiq,eiu-xway"); - if (eiu_node && !of_address_to_resource(eiu_node, 0, &res)) { - /* find out how many external irq sources we have */ -- exin_avail = of_irq_count(eiu_node); -+ exin_avail = of_property_count_u32_elems(eiu_node, "lantiq,eiu-irqs"); - - if (exin_avail > MAX_EIU) - exin_avail = MAX_EIU; - -- ret = of_irq_to_resource_table(eiu_node, -+ ret = of_property_read_u32_array(eiu_node, "lantiq,eiu-irqs", - ltq_eiu_irq, exin_avail); -- if (ret != exin_avail) -+ if (ret) - panic("failed to load external irq resources"); - - if (!request_mem_region(res.start, resource_size(&res), diff --git a/target/linux/lantiq/patches-4.4/0047-mtd-plat-nand-pass-of-node.patch b/target/linux/lantiq/patches-4.4/0047-mtd-plat-nand-pass-of-node.patch deleted file mode 100644 index f7d22b36f7..0000000000 --- a/target/linux/lantiq/patches-4.4/0047-mtd-plat-nand-pass-of-node.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/mtd/nand/plat_nand.c -+++ b/drivers/mtd/nand/plat_nand.c -@@ -31,6 +31,7 @@ static int plat_nand_probe(struct platfo - { - struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev); - struct mtd_part_parser_data ppdata; -+ struct device_node *np = pdev->dev.of_node; - struct plat_nand_data *data; - struct resource *res; - const char **part_types; -@@ -58,6 +59,7 @@ static int plat_nand_probe(struct platfo - return PTR_ERR(data->io_base); - - data->chip.priv = &data; -+ data->chip.flash_node = np; - data->mtd.priv = &data->chip; - data->mtd.dev.parent = &pdev->dev; - -@@ -105,7 +107,7 @@ static int plat_nand_probe(struct platfo - - part_types = pdata->chip.part_probe_types; - -- ppdata.of_node = pdev->dev.of_node; -+ ppdata.of_node = np; - err = mtd_device_parse_register(&data->mtd, part_types, &ppdata, - pdata->chip.partitions, - pdata->chip.nr_partitions); diff --git a/target/linux/lantiq/patches-4.4/0047-poweroff.patch b/target/linux/lantiq/patches-4.4/0047-poweroff.patch deleted file mode 100644 index 54249bba52..0000000000 --- a/target/linux/lantiq/patches-4.4/0047-poweroff.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -301,12 +301,6 @@ static void ltq_machine_halt(void) - unreachable(); - } - --static void ltq_machine_power_off(void) --{ -- local_irq_disable(); -- unreachable(); --} -- - static void ltq_usb_init(void) - { - /* Power for USB cores 1 & 2 */ -@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void - - _machine_restart = ltq_machine_restart; - _machine_halt = ltq_machine_halt; -- pm_power_off = ltq_machine_power_off; - - return 0; - } diff --git a/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch b/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch deleted file mode 100644 index c0d7afc541..0000000000 --- a/target/linux/lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Felix Fietkau <nbd@nbd.name> -Date: Thu, 19 Jan 2017 12:14:44 +0100 -Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup - -With the IRQ stack changes integrated, the XRX200 devices started -emitting a constant stream of kernel messages like this: - -[ 565.415310] Spurious IRQ: CAUSE=0x1100c300 - -This appears to be caused by IP0 firing for some reason without being -handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and -calling do_IRQ for all MIPS CPU interrupts. - -Cc: john@phrozen.org -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau <nbd@nbd.name> ---- - ---- a/arch/mips/lantiq/irq.c -+++ b/arch/mips/lantiq/irq.c -@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void) - DEFINE_HWx_IRQDISPATCH(5) - #endif - -+static void ltq_hw_irq_handler(struct irq_desc *desc) -+{ -+ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2); -+} -+ - #ifdef CONFIG_MIPS_MT_SMP - void __init arch_init_ipiirq(int irq, struct irqaction *action) - { -@@ -315,23 +320,19 @@ static struct irqaction irq_call = { - asmlinkage void plat_irq_dispatch(void) - { - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; -- unsigned int i; -+ int irq; - -- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) { -- do_IRQ(MIPS_CPU_TIMER_IRQ); -- goto out; -- } else { -- for (i = 0; i < MAX_IM; i++) { -- if (pending & (CAUSEF_IP2 << i)) { -- ltq_hw_irqdispatch(i); -- goto out; -- } -- } -+ if (!pending) { -+ spurious_interrupt(); -+ return; - } -- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); - --out: -- return; -+ pending >>= CAUSEB_IP; -+ while (pending) { -+ irq = fls(pending) - 1; -+ do_IRQ(MIPS_CPU_IRQ_BASE + irq); -+ pending &= ~BIT(irq); -+ } - } - - static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d - .map = icu_map, - }; - --static struct irqaction cascade = { -- .handler = no_action, -- .name = "cascade", --}; -- - int __init icu_of_init(struct device_node *node, struct device_node *parent) - { - struct device_node *eiu_node; -@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod - mips_cpu_irq_init(); - - for (i = 0; i < MAX_IM; i++) -- setup_irq(i + 2, &cascade); -+ irq_set_chained_handler(i + 2, ltq_hw_irq_handler); - - if (cpu_has_vint) { - pr_info("Setting up vectored interrupts\n"); diff --git a/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch b/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch deleted file mode 100644 index 91d6ac92e7..0000000000 --- a/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 6c0c0951bbf8c2c216675fe277fba4c42aa0a2bf Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= <a.seppala@gmail.com> -Date: Sat, 27 Feb 2016 12:31:24 +0200 -Subject: [PATCH] usb: dwc2: Add support for Lantiq ARX and XRX SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. - -Acked-by: John Youn <johnyoun@synopsys.com> -Signed-off-by: Antti Seppälä <a.seppala@gmail.com> -Signed-off-by: Felipe Balbi <balbi@kernel.org> ---- - Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++ - drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++ - 2 files changed, 36 insertions(+) - ---- a/Documentation/devicetree/bindings/usb/dwc2.txt -+++ b/Documentation/devicetree/bindings/usb/dwc2.txt -@@ -7,6 +7,8 @@ Required properties: - - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; -+ - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; -+ - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - - snps,dwc2: A generic DWC2 USB controller with default parameters. - - reg : Should contain 1 register range (address and length) - - interrupts : Should contain 1 interrupt ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -116,6 +116,37 @@ static const struct dwc2_core_params par - .hibernation = -1, - }; - -+static const struct dwc2_core_params params_ltq = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 288, /* 288 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ -+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ -+ .max_transfer_size = 65535, -+ .max_packet_count = 511, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << -+ GAHBCFG_HBSTLEN_SHIFT, -+ .uframe_sched = -1, -+ .external_id_pin_ctl = -1, -+ .hibernation = -1, -+}; -+ - static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) - { - struct platform_device *pdev = to_platform_device(hsotg->dev); -@@ -310,6 +341,8 @@ static int dwc2_driver_remove(struct pla - static const struct of_device_id dwc2_of_match_table[] = { - { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, - { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, -+ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, -+ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, - { .compatible = "snps,dwc2", .data = NULL }, - { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, - {}, diff --git a/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch deleted file mode 100644 index d92e7b1dcf..0000000000 --- a/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch +++ /dev/null @@ -1,129 +0,0 @@ -From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Fri, 6 Jan 2017 17:55:24 +0100 -Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs - -The size of the internal RAM of the DesignWare USB controller changed -between the different Lantiq SoCs. We have the following sizes: - -Amazon + Danube: 8 KByte -Amazon SE + arx100: 2 KByte -xrx200 + xrx300: 2.5 KByte - -For Danube SoC we do not provide the params and let the driver decide -to use sane defaults, for the Amazon SE and arx100 we use small fifos -and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo. -The auto detection of max_transfer_size and max_packet_count should -work, so remove it. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++------- - 1 file changed, 39 insertions(+), 7 deletions(-) - ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -116,7 +116,37 @@ static const struct dwc2_core_params par - .hibernation = -1, - }; - --static const struct dwc2_core_params params_ltq = { -+static const struct dwc2_core_params params_danube = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = -1, -+ .host_nperio_tx_fifo_size = -1, -+ .host_perio_tx_fifo_size = -1, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = -1, -+ .uframe_sched = -1, -+ .external_id_pin_ctl = -1, -+ .hibernation = -1, -+}; -+ -+static const struct dwc2_core_params params_ase = { - .otg_cap = 2, /* non-HNP/non-SRP */ - .otg_ver = -1, - .dma_enable = -1, -@@ -127,8 +157,38 @@ static const struct dwc2_core_params par - .host_rx_fifo_size = 288, /* 288 DWORDs */ - .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ - .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ -- .max_transfer_size = 65535, -- .max_packet_count = 511, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = -1, -+ .uframe_sched = -1, -+ .external_id_pin_ctl = -1, -+ .hibernation = -1, -+}; -+ -+static const struct dwc2_core_params params_xrx200 = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 288, /* 288 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ -+ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */ -+ .max_transfer_size = -1, -+ .max_packet_count = -1, - .host_channels = -1, - .phy_type = -1, - .phy_utmi_width = -1, -@@ -140,8 +200,7 @@ static const struct dwc2_core_params par - .host_ls_low_power_phy_clk = -1, - .ts_dline = -1, - .reload_ctl = -1, -- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << -- GAHBCFG_HBSTLEN_SHIFT, -+ .ahbcfg = -1, - .uframe_sched = -1, - .external_id_pin_ctl = -1, - .hibernation = -1, -@@ -341,8 +400,11 @@ static int dwc2_driver_remove(struct pla - static const struct of_device_id dwc2_of_match_table[] = { - { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, - { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, -- { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, -- { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, -+ { .compatible = "lantiq,danube-usb", .data = ¶ms_danube }, -+ { .compatible = "lantiq,ase-usb", .data = ¶ms_ase }, -+ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ase }, -+ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_xrx200 }, -+ { .compatible = "lantiq,xrx300-usb", .data = ¶ms_xrx200 }, - { .compatible = "snps,dwc2", .data = NULL }, - { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, - {}, diff --git a/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch deleted file mode 100644 index acc23080f1..0000000000 --- a/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch +++ /dev/null @@ -1,202 +0,0 @@ -From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Fri, 6 Jan 2017 17:40:12 +0100 -Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization - -This adds code to initialize the USB controller and PHY also on Danube, -Amazon SE and AR10. This code is based on the Vendor driver from -different UGW versions and compared to the hardware documentation. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++---------- - arch/mips/lantiq/xway/sysctrl.c | 20 +++++++ - 2 files changed, 110 insertions(+), 30 deletions(-) - ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -72,6 +72,8 @@ - #define RCU_USBCFG_HDSEL_BIT BIT(11) - #define RCU_USBCFG_HOST_END_BIT BIT(10) - #define RCU_USBCFG_SLV_END_BIT BIT(9) -+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17) -+ - - /* USB reset bits */ - #define RCU_USBRESET 0x0010 -@@ -85,6 +87,8 @@ - - #define RCU_CFG1A 0x0038 - #define RCU_CFG1B 0x003C -+#define RCU_CFG1_TX_PEE BIT(0) -+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */ - - /* USB PMU devices */ - #define PMU_AHBM BIT(15) -@@ -306,38 +310,91 @@ static void ltq_usb_init(void) - /* Power for USB cores 1 & 2 */ - ltq_pmu_enable(PMU_AHBM); - ltq_pmu_enable(PMU_USB0); -- ltq_pmu_enable(PMU_USB1); - -- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); -- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) -+ ltq_pmu_enable(PMU_USB1); -+ -+ if (of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) { -+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE | -+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE | -+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B); -+ } - - /* Enable USB PHY power for cores 1 & 2 */ - ltq_pmu_enable(PMU_USB0_P); -- ltq_pmu_enable(PMU_USB1_P); -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) -+ ltq_pmu_enable(PMU_USB1_P); -+ -+ if (of_machine_is_compatible("lantiq,ase") || -+ of_machine_is_compatible("lantiq,danube")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB2CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) { -+ /* Configure cores to host mode */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -+ RCU_USB2CFG); -+ -+ /* Select DMA endianness (Host-endian: big-endian) */ -+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) -+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -+ } -+ -+ if (of_machine_is_compatible("lantiq,ar9")) { -+ /* Hard reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) -+ | USBRESET_BIT | BIT(28), RCU_USBRESET); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) -+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET); -+ } else { -+ /* Hard reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); -+ } - -- /* Configure cores to host mode */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, -- RCU_USB1CFG); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, -- RCU_USB2CFG); -- -- /* Select DMA endianness (Host-endian: big-endian) */ -- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) -- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); -- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) -- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); -- -- /* Hard reset USB state machines */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); -- udelay(50 * 1000); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); -- -- /* Soft reset USB state machines */ -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); -- udelay(50 * 1000); -- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); -+ if (of_machine_is_compatible("lantiq,vr9")) { -+ /* Soft reset USB state machines */ -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); -+ udelay(50 * 1000); -+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) -+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); -+ } - } - - static int __init mips_reboot_setup(void) -@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void - if (!ltq_rcu_membase) - panic("Failed to remap core memory"); - -- if (of_machine_is_compatible("lantiq,ar9") || -- of_machine_is_compatible("lantiq,vr9")) -+ if (of_machine_is_compatible("lantiq,danube") || -+ of_machine_is_compatible("lantiq,ase") || -+ of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9") || -+ of_machine_is_compatible("lantiq,ar10")) - ltq_usb_init(); - - if (of_machine_is_compatible("lantiq,vr9")) ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk) - pr_warn("deactivating PMU module failed!"); - } - -+static void usb_set_clock(void) -+{ -+ unsigned int val = ltq_cgu_r32(ifccr); -+ -+ if (of_machine_is_compatible("lantiq,ar10") || -+ of_machine_is_compatible("lantiq,grx390")) { -+ val &= ~0x03; /* XTAL divided by 3 */ -+ } else if (of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,vr9")) { -+ /* TODO: this depends on the XTAL frequency */ -+ val |= 0x03; /* XTAL divided by 3 */ -+ } else if (of_machine_is_compatible("lantiq,ase")) { -+ val |= 0x20; /* from XTAL */ -+ } else if (of_machine_is_compatible("lantiq,danube")) { -+ val |= 0x30; /* 12 MHz, generated from 36 MHz */ -+ } -+ ltq_cgu_w32(val, ifccr); -+} -+ - /* the pci enable helper */ - static int pci_enable(struct clk *clk) - { -@@ -608,4 +627,5 @@ void __init ltq_soc_init(void) - - if (of_machine_is_compatible("lantiq,vr9")) - xbar_fpi_burst_disable(); -+ usb_set_clock(); - } diff --git a/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch b/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch deleted file mode 100644 index 3dc60a7032..0000000000 --- a/target/linux/lantiq/patches-4.4/0100-spi-add-support-for-Lantiq-SPI-controller.patch +++ /dev/null @@ -1,1133 +0,0 @@ -From 0175fc559debc22fe8d17e9b8ffd1452e0a4667d Mon Sep 17 00:00:00 2001 -From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> -Date: Tue, 16 Dec 2014 15:40:32 +0100 -Subject: [PATCH 1/2] spi: add support for Lantiq SPI controller - -Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> ---- - drivers/spi/Kconfig | 7 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-lantiq.c | 1089 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 1097 insertions(+) - create mode 100644 drivers/spi/spi-lantiq.c - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -355,6 +355,13 @@ config SPI_MT65XX - say Y or M here.If you are not sure, say N. - SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. - -+config SPI_LANTIQ -+ tristate "Lantiq SPI controller" -+ depends on LANTIQ && (SOC_TYPE_XWAY || SOC_FALCON) -+ help -+ This driver supports the Lantiq SPI controller in master -+ mode. -+ - config SPI_OC_TINY - tristate "OpenCores tiny SPI" - depends on GPIOLIB || COMPILE_TEST ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_GPIO) += spi-gpio.o - obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o - obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o - obj-$(CONFIG_SPI_IMX) += spi-imx.o -+obj-$(CONFIG_SPI_LANTIQ) += spi-lantiq.o - obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o - obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o - obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o ---- /dev/null -+++ b/drivers/spi/spi-lantiq.c -@@ -0,0 +1,1091 @@ -+/* -+ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/of_device.h> -+#include <linux/io.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/sched.h> -+#include <linux/completion.h> -+#include <linux/spinlock.h> -+#include <linux/err.h> -+#include <linux/gpio.h> -+#include <linux/pm_runtime.h> -+#include <linux/spi/spi.h> -+ -+#include <lantiq_soc.h> -+ -+#define SPI_RX_IRQ_NAME "spi_rx" -+#define SPI_TX_IRQ_NAME "spi_tx" -+#define SPI_ERR_IRQ_NAME "spi_err" -+#define SPI_FRM_IRQ_NAME "spi_frm" -+ -+#define SPI_CLC 0x00 -+#define SPI_PISEL 0x04 -+#define SPI_ID 0x08 -+#define SPI_CON 0x10 -+#define SPI_STAT 0x14 -+#define SPI_WHBSTATE 0x18 -+#define SPI_TB 0x20 -+#define SPI_RB 0x24 -+#define SPI_RXFCON 0x30 -+#define SPI_TXFCON 0x34 -+#define SPI_FSTAT 0x38 -+#define SPI_BRT 0x40 -+#define SPI_BRSTAT 0x44 -+#define SPI_SFCON 0x60 -+#define SPI_SFSTAT 0x64 -+#define SPI_GPOCON 0x70 -+#define SPI_GPOSTAT 0x74 -+#define SPI_FPGO 0x78 -+#define SPI_RXREQ 0x80 -+#define SPI_RXCNT 0x84 -+#define SPI_DMACON 0xec -+#define SPI_IRNEN 0xf4 -+#define SPI_IRNICR 0xf8 -+#define SPI_IRNCR 0xfc -+ -+#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ -+#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) -+#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ -+#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) -+#define SPI_CLC_DISS BIT(1) /* Disable status bit */ -+#define SPI_CLC_DISR BIT(0) /* Disable request bit */ -+ -+#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ -+#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) -+#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ -+#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) -+#define SPI_ID_REV_M 0x1F /* Hardware revision number */ -+#define SPI_ID_CFG BIT(5) /* DMA interface support */ -+ -+#define SPI_CON_BM_S 16 /* Data width selection */ -+#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) -+#define SPI_CON_EM BIT(24) /* Echo mode */ -+#define SPI_CON_IDLE BIT(23) /* Idle bit value */ -+#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ -+#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ -+#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ -+#define SPI_CON_AEN BIT(10) /* Abort error enable */ -+#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ -+#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ -+#define SPI_CON_LB BIT(7) /* Loopback control */ -+#define SPI_CON_PO BIT(6) /* Clock polarity control */ -+#define SPI_CON_PH BIT(5) /* Clock phase control */ -+#define SPI_CON_HB BIT(4) /* Heading control */ -+#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ -+#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ -+ -+#define SPI_STAT_RXBV_S 28 -+#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) -+#define SPI_STAT_BSY BIT(13) /* Busy flag */ -+#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ -+#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ -+#define SPI_STAT_AE BIT(10) /* Abort error flag */ -+#define SPI_STAT_RE BIT(9) /* Receive error flag */ -+#define SPI_STAT_TE BIT(8) /* Transmit error flag */ -+#define SPI_STAT_ME BIT(7) /* Mode error flag */ -+#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ -+#define SPI_STAT_EN BIT(0) /* Enable bit */ -+ -+#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ -+#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ -+#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ -+#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ -+#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ -+#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ -+#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ -+#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ -+#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ -+#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ -+#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ -+#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ -+#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ -+#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ -+#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ -+#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ -+#define SPI_WHBSTATE_CLR_ERRORS 0x0F50 -+ -+#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) -+#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ -+#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ -+#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) -+#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ -+#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ -+ -+#define SPI_FSTAT_RXFFL_S 0 -+#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) -+#define SPI_FSTAT_TXFFL_S 8 -+#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) -+ -+#define SPI_GPOCON_ISCSBN_S 8 -+#define SPI_GPOCON_INVOUTN_S 0 -+ -+#define SPI_FGPO_SETOUTN_S 8 -+#define SPI_FGPO_CLROUTN_S 0 -+ -+#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ -+#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ -+ -+#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ -+#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ -+#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ -+#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ -+#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ -+#define SPI_IRNEN_ALL 0x1F -+ -+struct lantiq_spi_hwcfg { -+ unsigned int num_chipselect; -+ unsigned int irnen_r; -+ unsigned int irnen_t; -+}; -+ -+struct lantiq_spi { -+ struct spi_master *master; -+ struct device *dev; -+ void __iomem *regbase; -+ struct clk *spi_clk; -+ struct clk *fpi_clk; -+ const struct lantiq_spi_hwcfg *hwcfg; -+ -+ spinlock_t lock; -+ struct completion xfer_complete; -+ -+ const u8 *tx; -+ u8 *rx; -+ unsigned int tx_todo; -+ unsigned int rx_todo; -+ unsigned int bits_per_word; -+ unsigned int speed_hz; -+ int status; -+ unsigned long timeout; -+ unsigned int cs_delay; -+}; -+ -+struct lantiq_spi_cstate { -+ int cs_gpio; -+}; -+ -+static u32 lantiq_spi_readl(const struct lantiq_spi *spi, u32 reg) -+{ -+ return readl_be(spi->regbase + reg); -+} -+ -+static void lantiq_spi_writel(const struct lantiq_spi *spi, u32 val, u32 reg) -+{ -+ writel_be(val, spi->regbase + reg); -+} -+ -+static void lantiq_spi_maskl(const struct lantiq_spi *spi, u32 clr, u32 set, -+ u32 reg) -+{ -+ u32 val = readl_be(spi->regbase + reg); -+ val &= ~clr; -+ val |= set; -+ writel_be(val, spi->regbase + reg); -+} -+ -+static int supports_dma(const struct lantiq_spi *spi) -+{ -+ u32 id = lantiq_spi_readl(spi, SPI_ID); -+ return id & SPI_ID_CFG; -+} -+ -+static unsigned int tx_fifo_size(const struct lantiq_spi *spi) -+{ -+ u32 id = lantiq_spi_readl(spi, SPI_ID); -+ return (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; -+} -+ -+static unsigned int rx_fifo_size(const struct lantiq_spi *spi) -+{ -+ u32 id = lantiq_spi_readl(spi, SPI_ID); -+ return (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; -+} -+ -+static unsigned int tx_fifo_level(const struct lantiq_spi *spi) -+{ -+ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT); -+ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; -+} -+ -+static unsigned int rx_fifo_level(const struct lantiq_spi *spi) -+{ -+ u32 fstat = lantiq_spi_readl(spi, SPI_FSTAT); -+ return fstat & SPI_FSTAT_RXFFL_M; -+} -+ -+static unsigned int tx_fifo_free(const struct lantiq_spi *spi) -+{ -+ return tx_fifo_size(spi) - tx_fifo_level(spi); -+} -+ -+static void rx_fifo_reset(const struct lantiq_spi *spi) -+{ -+ u32 val = rx_fifo_size(spi) << SPI_RXFCON_RXFITL_S; -+ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; -+ lantiq_spi_writel(spi, val, SPI_RXFCON); -+} -+ -+static void tx_fifo_reset(const struct lantiq_spi *spi) -+{ -+ u32 val = 1 << SPI_TXFCON_TXFITL_S; -+ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; -+ lantiq_spi_writel(spi, val, SPI_TXFCON); -+} -+ -+static void rx_fifo_flush(const struct lantiq_spi *spi) -+{ -+ lantiq_spi_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); -+} -+ -+static void tx_fifo_flush(const struct lantiq_spi *spi) -+{ -+ lantiq_spi_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); -+} -+ -+static int hw_is_busy(const struct lantiq_spi *spi) -+{ -+ u32 stat = lantiq_spi_readl(spi, SPI_STAT); -+ return stat & SPI_STAT_BSY; -+} -+ -+static void hw_enter_config_mode(const struct lantiq_spi *spi) -+{ -+ lantiq_spi_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); -+} -+ -+static void hw_enter_active_mode(const struct lantiq_spi *spi) -+{ -+ lantiq_spi_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); -+} -+ -+static void hw_setup_speed_hz(const struct lantiq_spi *spi, -+ unsigned int max_speed_hz) -+{ -+ u32 spi_clk, brt; -+ -+ /* -+ * SPI module clock is derived from FPI bus clock dependent on -+ * divider value in CLC.RMS which is always set to 1. -+ * -+ * f_SPI -+ * baudrate = -------------- -+ * 2 * (BR + 1) -+ */ -+ spi_clk = clk_get_rate(spi->fpi_clk) / 2; -+ -+ if (max_speed_hz > spi_clk) -+ brt = 0; -+ else -+ brt = spi_clk / max_speed_hz - 1; -+ -+ if (brt > 0xFFFF) -+ brt = 0xFFFF; -+ -+ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", -+ spi_clk, max_speed_hz, brt); -+ -+ lantiq_spi_writel(spi, brt, SPI_BRT); -+} -+ -+static void hw_setup_bits_per_word(const struct lantiq_spi *spi, -+ unsigned int bits_per_word) -+{ -+ u32 bm; -+ -+ /* CON.BM value = bits_per_word - 1 */ -+ bm = (bits_per_word - 1) << SPI_CON_BM_S; -+ -+ lantiq_spi_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); -+} -+ -+static void hw_setup_clock_mode(const struct lantiq_spi *spi, -+ unsigned int mode) -+{ -+ u32 con_set = 0, con_clr = 0; -+ -+ /* -+ * SPI mode mapping in CON register: -+ * Mode CPOL CPHA CON.PO CON.PH -+ * 0 0 0 0 1 -+ * 1 0 1 0 0 -+ * 2 1 0 1 1 -+ * 3 1 1 1 0 -+ */ -+ if (mode & SPI_CPHA) -+ con_clr |= SPI_CON_PH; -+ else -+ con_set |= SPI_CON_PH; -+ -+ if (mode & SPI_CPOL) -+ con_set |= SPI_CON_PO | SPI_CON_IDLE; -+ else -+ con_clr |= SPI_CON_PO | SPI_CON_IDLE; -+ -+ /* Set heading control */ -+ if (mode & SPI_LSB_FIRST) -+ con_clr |= SPI_CON_HB; -+ else -+ con_set |= SPI_CON_HB; -+ -+ /* Set loopback mode */ -+ if (mode & SPI_LOOP) -+ con_set |= SPI_CON_LB; -+ else -+ con_clr |= SPI_CON_LB; -+ -+ lantiq_spi_maskl(spi, con_clr, con_set, SPI_CON); -+} -+ -+static void lantiq_spi_hw_init(const struct lantiq_spi *spi) -+{ -+ /* -+ * Set clock divider for run mode to 1 to -+ * run at same frequency as FPI bus -+ */ -+ lantiq_spi_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); -+ -+ /* Put controller into config mode */ -+ hw_enter_config_mode(spi); -+ -+ /* Disable all interrupts */ -+ lantiq_spi_writel(spi, 0, SPI_IRNEN); -+ -+ /* Clear error flags */ -+ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* Enable error checking, disable TX/RX */ -+ lantiq_spi_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | -+ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+ -+ /* Setup default SPI mode */ -+ hw_setup_bits_per_word(spi, spi->bits_per_word); -+ hw_setup_clock_mode(spi, SPI_MODE_0); -+ -+ /* Enable master mode and clear error flags */ -+ lantiq_spi_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, -+ SPI_WHBSTATE); -+ -+ /* Reset GPIO/CS registers */ -+ lantiq_spi_writel(spi, 0, SPI_GPOCON); -+ lantiq_spi_writel(spi, 0xFF00, SPI_FPGO); -+ -+ /* Enable and flush FIFOs */ -+ rx_fifo_reset(spi); -+ tx_fifo_reset(spi); -+} -+ -+static void hw_chipselect_set(struct lantiq_spi *spi, unsigned int cs) -+{ -+ u32 fgpo = (1 << (cs - 1 + SPI_FGPO_SETOUTN_S)); -+ lantiq_spi_writel(spi, fgpo, SPI_FPGO); -+} -+ -+static void hw_chipselect_clear(struct lantiq_spi *spi, unsigned int cs) -+{ -+ u32 fgpo = (1 << (cs - 1)); -+ lantiq_spi_writel(spi, fgpo, SPI_FPGO); -+} -+ -+static void hw_chipselect_init(struct lantiq_spi *spi, unsigned int cs, -+ unsigned int cs_high) -+{ -+ u32 gpocon; -+ -+ /* set GPO pin to CS mode */ -+ gpocon = 1 << ((cs - 1) + SPI_GPOCON_ISCSBN_S); -+ -+ /* invert GPO pin */ -+ if (cs_high) -+ gpocon |= 1 << (cs - 1); -+ -+ lantiq_spi_maskl(spi, 0, gpocon, SPI_GPOCON); -+} -+ -+static void chipselect_enable(struct spi_device *spidev) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); -+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); -+ -+ if (cstate->cs_gpio >= 0) -+ gpio_set_value(cstate->cs_gpio, spidev->mode & SPI_CS_HIGH); -+ else -+ hw_chipselect_clear(spi, spidev->chip_select); -+ -+ /* CS setup/recovery time */ -+ if (spi->cs_delay) -+ ndelay(spi->cs_delay); -+} -+ -+static void chipselect_disable(struct spi_device *spidev) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); -+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); -+ -+ /* CS hold time */ -+ if (spi->cs_delay) -+ ndelay(spi->cs_delay); -+ -+ if (cstate->cs_gpio >= 0) -+ gpio_set_value(cstate->cs_gpio, !(spidev->mode & SPI_CS_HIGH)); -+ else -+ hw_chipselect_set(spi, spidev->chip_select); -+ -+ /* CS setup/recovery time */ -+ if (spi->cs_delay) -+ ndelay(spi->cs_delay); -+} -+ -+static int lantiq_spi_setup(struct spi_device *spidev) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(spidev->master); -+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); -+ int err; -+ -+ if (!cstate) { -+ cstate = kzalloc(sizeof(*cstate), GFP_KERNEL); -+ if (!cstate) -+ return -ENOMEM; -+ -+ spi_set_ctldata(spidev, cstate); -+ cstate->cs_gpio = -ENOENT; -+ -+ if (spidev->cs_gpio >= 0) { -+ dev_dbg(spi->dev, "using chipselect %u on GPIO %d\n", -+ spidev->chip_select, spidev->cs_gpio); -+ -+ err = gpio_request(spidev->cs_gpio, dev_name(spi->dev)); -+ if (err) -+ return err; -+ -+ gpio_direction_output(spidev->cs_gpio, -+ !(spidev->mode & SPI_CS_HIGH)); -+ -+ cstate->cs_gpio = spidev->cs_gpio; -+ } else { -+ dev_dbg(spi->dev, "using internal chipselect %u\n", -+ spidev->chip_select); -+ -+ hw_chipselect_init(spi, spidev->chip_select, -+ spidev->mode & SPI_CS_HIGH); -+ hw_chipselect_set(spi, spidev->chip_select); -+ } -+ } -+ -+ return 0; -+} -+ -+static void lantiq_spi_cleanup(struct spi_device *spidev) -+{ -+ struct lantiq_spi_cstate *cstate = spi_get_ctldata(spidev); -+ -+ if (cstate->cs_gpio >= 0) -+ gpio_free(cstate->cs_gpio); -+ -+ kfree(cstate); -+ spi_set_ctldata(spidev, NULL); -+} -+ -+static void hw_setup_message(const struct lantiq_spi *spi, -+ struct spi_device *spidev) -+{ -+ const struct lantiq_spi_hwcfg *hwcfg = spi->hwcfg; -+ -+ hw_enter_config_mode(spi); -+ hw_setup_clock_mode(spi, spidev->mode); -+ hw_enter_active_mode(spi); -+ -+ /* Enable interrupts */ -+ lantiq_spi_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, -+ SPI_IRNEN); -+} -+ -+static void hw_setup_transfer(struct lantiq_spi *spi, struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ unsigned int speed_hz, bits_per_word; -+ u32 con; -+ -+ if (t->speed_hz) -+ speed_hz = t->speed_hz; -+ else -+ speed_hz = spidev->max_speed_hz; -+ -+ if (t->bits_per_word) -+ bits_per_word = t->bits_per_word; -+ else -+ bits_per_word = spidev->bits_per_word; -+ -+ if (bits_per_word != spi->bits_per_word || -+ speed_hz != spi->speed_hz) { -+ hw_enter_config_mode(spi); -+ hw_setup_speed_hz(spi, speed_hz); -+ hw_setup_bits_per_word(spi, bits_per_word); -+ hw_enter_active_mode(spi); -+ -+ spi->speed_hz = speed_hz; -+ spi->bits_per_word = bits_per_word; -+ } -+ -+ /* Configure transmitter and receiver */ -+ con = lantiq_spi_readl(spi, SPI_CON); -+ if (t->tx_buf) -+ con &= ~SPI_CON_TXOFF; -+ else -+ con |= SPI_CON_TXOFF; -+ -+ if (t->rx_buf) -+ con &= ~SPI_CON_RXOFF; -+ else -+ con |= SPI_CON_RXOFF; -+ -+ lantiq_spi_writel(spi, con, SPI_CON); -+} -+ -+static void hw_finish_message(const struct lantiq_spi *spi) -+{ -+ /* Disable interrupts */ -+ lantiq_spi_writel(spi, 0, SPI_IRNEN); -+ -+ /* Disable transmitter and receiver */ -+ lantiq_spi_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); -+} -+ -+static void tx_fifo_write(struct lantiq_spi *spi) -+{ -+ const u8 *tx8; -+ const u16 *tx16; -+ const u32 *tx32; -+ u32 data; -+ unsigned int tx_free = tx_fifo_free(spi); -+ -+ while (spi->tx_todo && tx_free) { -+ switch (spi->bits_per_word) { -+ case 8: -+ tx8 = spi->tx; -+ data = *tx8; -+ spi->tx_todo--; -+ spi->tx++; -+ break; -+ case 16: -+ tx16 = (u16 *) spi->tx; -+ data = *tx16; -+ spi->tx_todo -= 2; -+ spi->tx += 2; -+ break; -+ case 32: -+ tx32 = (u32 *) spi->tx; -+ data = *tx32; -+ spi->tx_todo -= 4; -+ spi->tx += 4; -+ break; -+ default: -+ BUG(); -+ } -+ -+ lantiq_spi_writel(spi, data, SPI_TB); -+ tx_free--; -+ } -+} -+ -+static void rx_fifo_read_full_duplex(struct lantiq_spi *spi) -+{ -+ u8 *rx8; -+ u16 *rx16; -+ u32 *rx32; -+ u32 data; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ while (rx_fill) { -+ data = lantiq_spi_readl(spi, SPI_RB); -+ -+ switch (spi->bits_per_word) { -+ case 8: -+ rx8 = spi->rx; -+ *rx8 = data; -+ spi->rx_todo--; -+ spi->rx++; -+ break; -+ case 16: -+ rx16 = (u16 *) spi->rx; -+ *rx16 = data; -+ spi->rx_todo -= 2; -+ spi->rx += 2; -+ break; -+ case 32: -+ rx32 = (u32 *) spi->rx; -+ *rx32 = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ break; -+ default: -+ BUG(); -+ } -+ -+ rx_fill--; -+ } -+} -+ -+static void rx_fifo_read_half_duplex(struct lantiq_spi *spi) -+{ -+ u32 data, *rx32; -+ u8 *rx8; -+ unsigned int rxbv, shift; -+ unsigned int rx_fill = rx_fifo_level(spi); -+ -+ /* -+ * In RX-only mode the bits per word value is ignored by HW. A value -+ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. -+ * If remaining RX bytes are less than 4, the FIFO must be read -+ * differently. The amount of received and valid bytes is indicated -+ * by STAT.RXBV register value. -+ */ -+ while (rx_fill) { -+ if (spi->rx_todo < 4) { -+ rxbv = (lantiq_spi_readl(spi, SPI_STAT) & -+ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; -+ data = lantiq_spi_readl(spi, SPI_RB); -+ -+ shift = (rxbv - 1) * 8; -+ rx8 = spi->rx; -+ -+ while (rxbv) { -+ *rx8++ = (data >> shift) & 0xFF; -+ rxbv--; -+ shift -= 8; -+ spi->rx_todo--; -+ spi->rx++; -+ } -+ } else { -+ data = lantiq_spi_readl(spi, SPI_RB); -+ rx32 = (u32 *) spi->rx; -+ -+ *rx32++ = data; -+ spi->rx_todo -= 4; -+ spi->rx += 4; -+ } -+ rx_fill--; -+ } -+} -+ -+static void rx_request(struct lantiq_spi *spi) -+{ -+ unsigned int rxreq, rxreq_max; -+ -+ /* -+ * To avoid receive overflows at high clocks it is better to request -+ * only the amount of bytes that fits into all FIFOs. This value -+ * depends on the FIFO size implemented in hardware. -+ */ -+ rxreq = spi->rx_todo; -+ rxreq_max = rx_fifo_size(spi) * 4; -+ if (rxreq > rxreq_max) -+ rxreq = rxreq_max; -+ -+ lantiq_spi_writel(spi, rxreq, SPI_RXREQ); -+} -+ -+static irqreturn_t lantiq_spi_xmit_interrupt(int irq, void *data) -+{ -+ struct lantiq_spi *spi = data; -+ -+ /* handle possible interrupts after device initialization */ -+ if (!spi->rx && !spi->tx) -+ return IRQ_HANDLED; -+ -+ if (spi->tx) { -+ if (spi->rx && spi->rx_todo) -+ rx_fifo_read_full_duplex(spi); -+ -+ if (spi->tx_todo) -+ tx_fifo_write(spi); -+ else -+ goto completed; -+ } else if (spi->rx) { -+ if (spi->rx_todo) { -+ rx_fifo_read_half_duplex(spi); -+ -+ if (spi->rx_todo) -+ rx_request(spi); -+ else -+ goto completed; -+ } else -+ goto completed; -+ } -+ -+ return IRQ_HANDLED; -+ -+completed: -+ spi->status = 0; -+ complete(&spi->xfer_complete); -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t lantiq_spi_err_interrupt(int irq, void *data) -+{ -+ struct lantiq_spi *spi = data; -+ u32 stat = lantiq_spi_readl(spi, SPI_STAT); -+ -+ if (stat & SPI_STAT_RUE) -+ dev_err(spi->dev, "receive underflow error\n"); -+ if (stat & SPI_STAT_TUE) -+ dev_err(spi->dev, "transmit underflow error\n"); -+ if (stat & SPI_STAT_RE) -+ dev_err(spi->dev, "receive overflow error\n"); -+ if (stat & SPI_STAT_TE) -+ dev_err(spi->dev, "transmit overflow error\n"); -+ if (stat & SPI_STAT_ME) -+ dev_err(spi->dev, "mode error\n"); -+ -+ /* Disable all interrupts */ -+ lantiq_spi_writel(spi, 0, SPI_IRNEN); -+ -+ /* Clear error flags */ -+ lantiq_spi_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); -+ -+ /* flush FIFOs */ -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+ -+ /* set bad status so it can be retried */ -+ spi->status = -EIO; -+ complete(&spi->xfer_complete); -+ -+ return IRQ_HANDLED; -+} -+ -+static int transfer_start(struct lantiq_spi *spi, struct spi_device *spidev, -+ struct spi_transfer *t) -+{ -+ unsigned long flags; -+ -+ spin_lock_irqsave(&spi->lock, flags); -+ -+ spi->tx = t->tx_buf; -+ spi->rx = t->rx_buf; -+ spi->status = -EINPROGRESS; -+ -+ if (t->tx_buf) { -+ spi->tx_todo = t->len; -+ -+ /* initially fill TX FIFO */ -+ tx_fifo_write(spi); -+ } -+ -+ if (spi->rx) { -+ spi->rx_todo = t->len; -+ -+ /* start shift clock in RX-only mode */ -+ if (!spi->tx) -+ rx_request(spi); -+ } -+ -+ spin_unlock_irqrestore(&spi->lock, flags); -+ -+ return 0; -+} -+ -+static int transfer_wait_finished(struct lantiq_spi *spi) -+{ -+ unsigned long timeout; -+ -+ /* wait for completion by interrupt */ -+ timeout = wait_for_completion_timeout(&spi->xfer_complete, -+ msecs_to_jiffies(spi->timeout)); -+ if (!timeout) -+ return -EIO; -+ -+ /* make sure that HW is idle */ -+ timeout = jiffies + msecs_to_jiffies(spi->timeout); -+ do { -+ if (!hw_is_busy(spi)) -+ return 0; -+ -+ cond_resched(); -+ } while (!time_after_eq(jiffies, timeout)); -+ -+ /* flush FIFOs on timeout */ -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+ -+ return -EIO; -+} -+ -+static int lantiq_spi_transfer_one_message(struct spi_master *master, -+ struct spi_message *msg) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(master); -+ struct spi_device *spidev = msg->spi; -+ struct spi_transfer *t; -+ int status; -+ unsigned int cs_change = 1; -+ -+ hw_setup_message(spi, spidev); -+ -+ list_for_each_entry(t, &msg->transfers, transfer_list) { -+ reinit_completion(&spi->xfer_complete); -+ -+ hw_setup_transfer(spi, spidev, t); -+ -+ if (cs_change) -+ chipselect_enable(spidev); -+ cs_change = t->cs_change; -+ -+ status = transfer_start(spi, spidev, t); -+ if (status) { -+ dev_err(spi->dev, "failed to start transfer\n"); -+ goto done; -+ } -+ -+ status = transfer_wait_finished(spi); -+ if (status) { -+ dev_err(spi->dev, "transfer timeout\n"); -+ goto done; -+ } -+ -+ status = spi->status; -+ if (status) { -+ dev_err(spi->dev, "transfer failed\n"); -+ goto done; -+ } -+ -+ msg->actual_length += t->len; -+ -+ if (t->delay_usecs) -+ udelay(t->delay_usecs); -+ -+ if (cs_change) -+ chipselect_disable(spidev); -+ } -+ -+done: -+ msg->status = status; -+ -+ if (!(status == 0 && cs_change)) -+ chipselect_disable(spidev); -+ -+ spi_finalize_current_message(master); -+ hw_finish_message(spi); -+ -+ return status; -+} -+ -+static int lantiq_spi_prepare_transfer(struct spi_master *master) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(master); -+ -+ pm_runtime_get_sync(spi->dev); -+ -+ return 0; -+} -+ -+static int lantiq_spi_unprepare_transfer(struct spi_master *master) -+{ -+ struct lantiq_spi *spi = spi_master_get_devdata(master); -+ -+ pm_runtime_put(spi->dev); -+ -+ return 0; -+} -+ -+static const struct lantiq_spi_hwcfg spi_xway = { -+ .num_chipselect = 3, -+ .irnen_r = SPI_IRNEN_R_XWAY, -+ .irnen_t = SPI_IRNEN_T_XWAY, -+}; -+ -+static const struct lantiq_spi_hwcfg spi_xrx = { -+ .num_chipselect = 6, -+ .irnen_r = SPI_IRNEN_R_XRX, -+ .irnen_t = SPI_IRNEN_T_XRX, -+}; -+ -+static const struct of_device_id lantiq_spi_match[] = { -+ { .compatible = "lantiq,spi-xway", .data = &spi_xway, }, /* DEPRECATED */ -+ { .compatible = "lantiq,ase-spi", .data = &spi_xway, }, -+ { .compatible = "lantiq,xrx100-spi", .data = &spi_xrx, }, -+ { .compatible = "lantiq,xrx200-spi", .data = &spi_xrx, }, -+ { .compatible = "lantiq,xrx330-spi", .data = &spi_xrx, }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, lantiq_spi_match); -+ -+static int lantiq_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct resource *res; -+ struct lantiq_spi *spi; -+ const struct lantiq_spi_hwcfg *hwcfg; -+ const struct of_device_id *match; -+ int err, rx_irq, tx_irq, err_irq; -+ -+ match = of_match_device(lantiq_spi_match, &pdev->dev); -+ if (!match) { -+ dev_err(&pdev->dev, "no device match\n"); -+ return -EINVAL; -+ } -+ hwcfg = match->data; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENXIO; -+ } -+ -+ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); -+ if (rx_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_RX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); -+ if (tx_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_TX_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); -+ if (err_irq < 0) { -+ dev_err(&pdev->dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); -+ return -ENXIO; -+ } -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct lantiq_spi)); -+ if (!master) -+ return -ENOMEM; -+ -+ spi = spi_master_get_devdata(master); -+ spi->master = master; -+ spi->dev = &pdev->dev; -+ spi->hwcfg = hwcfg; -+ platform_set_drvdata(pdev, spi); -+ -+ spi->regbase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(spi->regbase)) { -+ err = PTR_ERR(spi->regbase); -+ goto err_master_put; -+ } -+ -+ err = devm_request_irq(&pdev->dev, rx_irq, lantiq_spi_xmit_interrupt, 0, -+ SPI_RX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(&pdev->dev, tx_irq, lantiq_spi_xmit_interrupt, 0, -+ SPI_TX_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ err = devm_request_irq(&pdev->dev, err_irq, lantiq_spi_err_interrupt, 0, -+ SPI_ERR_IRQ_NAME, spi); -+ if (err) -+ goto err_master_put; -+ -+ spi->spi_clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(spi->spi_clk)) { -+ err = PTR_ERR(spi->spi_clk); -+ goto err_master_put; -+ } -+ clk_prepare_enable(spi->spi_clk); -+ -+ spi->fpi_clk = clk_get_fpi(); -+ if (IS_ERR(spi->fpi_clk)) { -+ err = PTR_ERR(spi->fpi_clk); -+ goto err_clk_disable; -+ } -+ -+ init_completion(&spi->xfer_complete); -+ spin_lock_init(&spi->lock); -+ spi->timeout = 2000; -+ spi->cs_delay = 100; -+ spi->bits_per_word = 8; -+ spi->speed_hz = 0; -+ -+ master->dev.of_node = pdev->dev.of_node; -+ master->bus_num = 0; -+ master->num_chipselect = hwcfg->num_chipselect; -+ master->setup = lantiq_spi_setup; -+ master->cleanup = lantiq_spi_cleanup; -+ master->prepare_transfer_hardware = lantiq_spi_prepare_transfer; -+ master->transfer_one_message = lantiq_spi_transfer_one_message; -+ master->unprepare_transfer_hardware = lantiq_spi_unprepare_transfer; -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | -+ SPI_LOOP; -+ -+ lantiq_spi_hw_init(spi); -+ -+ err = spi_register_master(master); -+ if (err) { -+ dev_err(&pdev->dev, "failed to register spi_master\n"); -+ goto err_clk_put; -+ } -+ -+ dev_info(&pdev->dev, -+ "Lantiq SPI controller (TXFS %u, RXFS %u, DMA %u)\n", -+ tx_fifo_size(spi), rx_fifo_size(spi), supports_dma(spi)); -+ -+ return 0; -+ -+err_clk_put: -+ clk_put(spi->fpi_clk); -+err_clk_disable: -+ clk_disable_unprepare(spi->spi_clk); -+ clk_put(spi->spi_clk); -+err_master_put: -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(master); -+ -+ return err; -+} -+ -+static int lantiq_spi_remove(struct platform_device *pdev) -+{ -+ struct lantiq_spi *spi = platform_get_drvdata(pdev); -+ struct spi_master *master = spi->master; -+ -+ spi_unregister_master(master); -+ -+ lantiq_spi_writel(spi, 0, SPI_IRNEN); -+ rx_fifo_flush(spi); -+ tx_fifo_flush(spi); -+ hw_enter_config_mode(spi); -+ -+ clk_disable_unprepare(spi->spi_clk); -+ clk_put(spi->spi_clk); -+ clk_put(spi->fpi_clk); -+ -+ platform_set_drvdata(pdev, NULL); -+ spi_master_put(master); -+ -+ return 0; -+} -+ -+static struct platform_driver lantiq_spi_driver = { -+ .probe = lantiq_spi_probe, -+ .remove = lantiq_spi_remove, -+ .driver = { -+ .name = "spi-lantiq", -+ .owner = THIS_MODULE, -+ .of_match_table = lantiq_spi_match, -+ }, -+}; -+module_platform_driver(lantiq_spi_driver); -+ -+MODULE_DESCRIPTION("Lantiq SPI controller driver"); -+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:spi-lantiq"); diff --git a/target/linux/lantiq/patches-4.4/0101-find_active_root.patch b/target/linux/lantiq/patches-4.4/0101-find_active_root.patch deleted file mode 100644 index 978def35e6..0000000000 --- a/target/linux/lantiq/patches-4.4/0101-find_active_root.patch +++ /dev/null @@ -1,93 +0,0 @@ ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,6 +25,38 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static uint8_t * brnboot_get_selected_root_part(struct mtd_info *master, -+ loff_t offset) -+{ -+ static uint8_t root_id; -+ int err, len; -+ -+ err = mtd_read(master, offset, 0x01, &len, &root_id); -+ -+ if (mtd_is_bitflip(err) || !err) -+ return &root_id; -+ -+ return NULL; -+} -+ -+static void brnboot_set_active_root_part(struct mtd_partition *pparts, -+ struct device_node **part_nodes, -+ int nr_parts, -+ uint8_t *root_id) -+{ -+ int i; -+ -+ for (i = 0; i < nr_parts; i++) { -+ int part_root_id; -+ -+ if (!of_property_read_u32(part_nodes[i], "brnboot,root-id", &part_root_id) -+ && part_root_id == *root_id) { -+ pparts[i].name = "firmware"; -+ break; -+ } -+ } -+} -+ - static int parse_ofpart_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -35,7 +67,8 @@ static int parse_ofpart_partitions(struc - struct device_node *pp; - int nr_parts, i, ret = 0; - bool dedicated = true; -- -+ uint8_t *proot_id = NULL; -+ struct device_node **part_nodes; - - if (!data) - return 0; -@@ -73,7 +106,9 @@ static int parse_ofpart_partitions(struc - return 0; - - *pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL); -- if (!*pparts) -+ part_nodes = kzalloc(nr_parts * sizeof(*part_nodes), GFP_KERNEL); -+ -+ if (!*pparts || !part_nodes) - return -ENOMEM; - - i = 0; -@@ -121,12 +156,22 @@ static int parse_ofpart_partitions(struc - if (of_get_property(pp, "lock", &len)) - (*pparts)[i].mask_flags |= MTD_POWERUP_LOCK; - -+ if (!proot_id && of_device_is_compatible(pp, "brnboot,root-selector")) -+ proot_id = brnboot_get_selected_root_part(master, (*pparts)[i].offset); -+ -+ part_nodes[i] = pp; -+ - i++; - } - - if (!nr_parts) - goto ofpart_none; - -+ if (proot_id) -+ brnboot_set_active_root_part(*pparts, part_nodes, nr_parts, proot_id); -+ -+ kfree(part_nodes); -+ - return nr_parts; - - ofpart_fail: -@@ -136,6 +181,7 @@ ofpart_fail: - ofpart_none: - of_node_put(pp); - kfree(*pparts); -+ kfree(part_nodes); - *pparts = NULL; - return ret; - } diff --git a/target/linux/lantiq/patches-4.4/0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch b/target/linux/lantiq/patches-4.4/0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch deleted file mode 100644 index 3c6fa238b2..0000000000 --- a/target/linux/lantiq/patches-4.4/0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch +++ /dev/null @@ -1,48 +0,0 @@ -From a32285ed4ba970b868b7fb49b716d776f4410ef6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 19 Mar 2016 16:52:46 +0100 -Subject: [PATCH] MIPS: lantiq: add support for device tree file from boot - loader - -This fetches the device tree file like it is specified in the MIPS UHI -interface if one was found. This is also used when the device tree file -was appended to the kernel image with cat. -This code is copied from arch/mips/bmips/setup.c. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/lantiq/prom.c | 13 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -65,6 +65,8 @@ static void __init prom_init_cmdline(voi - - void __init plat_mem_setup(void) - { -+ void *dtb; -+ - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; -@@ -72,11 +74,18 @@ void __init plat_mem_setup(void) - - set_io_port_base((unsigned long) KSEG1); - -+ if (fw_arg0 == -2) /* UHI interface */ -+ dtb = (void *)fw_arg1; -+ else if (__dtb_start != __dtb_end) -+ dtb = (void *)__dtb_start; -+ else -+ panic("no dtb found"); -+ - /* -- * Load the builtin devicetree. This causes the chosen node to be -+ * Load the devicetree. This causes the chosen node to be - * parsed resulting in our memory appearing - */ -- __dt_setup_arch(__dtb_start); -+ __dt_setup_arch(dtb); - } - - void __init device_tree_init(void) diff --git a/target/linux/lantiq/patches-4.4/0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch b/target/linux/lantiq/patches-4.4/0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch deleted file mode 100644 index 7a7dd970f1..0000000000 --- a/target/linux/lantiq/patches-4.4/0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 8cfe01de7d5c974165c1383fcc9e1dad6953341d Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Sat, 19 Mar 2016 17:06:00 +0100 -Subject: [PATCH 2/2] MIPS: lantiq: make it possible to build in no device tree - -Now it is possible to build in no device tree at all and depend on the -boot loader providing one or someone concatenating a device tree to the -end of the image. - -This was copied from arch/mips/bmips/Kconfig - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/lantiq/Kconfig | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -26,7 +26,17 @@ config SOC_FALCON - endchoice - - choice -- prompt "Devicetree" -+ prompt "Built-in device tree" -+ help -+ Legacy bootloaders do not pass a DTB pointer to the kernel, so -+ if a "wrapper" is not being used, the kernel will need to include -+ a device tree that matches the target board. -+ -+ The builtin DTB will only be used if the firmware does not supply -+ a valid DTB. -+ -+config LANTIQ_DT_NONE -+ bool "None" - - config DT_EASY50712 - bool "Easy50712" diff --git a/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch deleted file mode 100644 index 03d43c241f..0000000000 --- a/target/linux/lantiq/patches-4.4/0151-lantiq-ifxmips_pcie-use-of.patch +++ /dev/null @@ -1,166 +0,0 @@ ---- a/arch/mips/pci/ifxmips_pcie.c -+++ b/arch/mips/pci/ifxmips_pcie.c -@@ -18,6 +18,9 @@ - #include <linux/pci_regs.h> - #include <linux/module.h> - -+#include <linux/of_gpio.h> -+#include <linux/of_platform.h> -+ - #include "ifxmips_pcie.h" - #include "ifxmips_pcie_reg.h" - -@@ -40,6 +43,7 @@ - static DEFINE_SPINLOCK(ifx_pcie_lock); - - u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); -+static int pcie_reset_gpio; - - static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { - { -@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ... - printk("%s", buf); - } - -+static inline void pcie_ep_gpio_rst_init(int pcie_port) -+{ -+ gpio_direction_output(pcie_reset_gpio, 1); -+ gpio_set_value(pcie_reset_gpio, 1); -+} -+ -+static inline void pcie_device_rst_assert(int pcie_port) -+{ -+ gpio_set_value(pcie_reset_gpio, 0); -+} -+ -+static inline void pcie_device_rst_deassert(int pcie_port) -+{ -+ mdelay(100); -+ gpio_direction_output(pcie_reset_gpio, 1); -+} - - static inline int pcie_ltssm_enable(int pcie_port) - { -@@ -1045,8 +1065,9 @@ pcie_rc_initialize(int pcie_port) - return 0; - } - --static int __init ifx_pcie_bios_init(void) -+static int ifx_pcie_bios_probe(struct platform_device *pdev) - { -+ struct device_node *node = pdev->dev.of_node; - void __iomem *io_map_base; - int pcie_port; - int startup_port; -@@ -1055,7 +1076,17 @@ static int __init ifx_pcie_bios_init(voi - pcie_ahb_pmu_setup(); - - startup_port = IFX_PCIE_PORT0; -- -+ -+ pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); -+ if (gpio_is_valid(pcie_reset_gpio)) { -+ int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset"); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio); -+ return ret; -+ } -+ gpio_direction_output(pcie_reset_gpio, 1); -+ } -+ - for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ - if (pcie_rc_initialize(pcie_port) == 0) { - IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", -@@ -1067,6 +1098,7 @@ static int __init ifx_pcie_bios_init(voi - return -ENOMEM; - } - ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; -+ pci_load_of_ranges(&ifx_pcie_controller[pcie_port].pcic, node); - - register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); - /* XXX, clear error status */ -@@ -1083,6 +1115,30 @@ static int __init ifx_pcie_bios_init(voi - - return 0; - } -+ -+static const struct of_device_id ifxmips_pcie_match[] = { -+ { .compatible = "lantiq,pcie-xrx200" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ifxmips_pcie_match); -+ -+static struct platform_driver ltq_pci_driver = { -+ .probe = ifx_pcie_bios_probe, -+ .driver = { -+ .name = "pcie-xrx200", -+ .owner = THIS_MODULE, -+ .of_match_table = ifxmips_pcie_match, -+ }, -+}; -+ -+int __init ifx_pcie_bios_init(void) -+{ -+ int ret = platform_driver_register(<q_pci_driver); -+ if (ret) -+ pr_info("pcie-xrx200: Error registering platform driver!"); -+ return ret; -+} -+ - arch_initcall(ifx_pcie_bios_init); - - MODULE_LICENSE("GPL"); ---- a/arch/mips/pci/ifxmips_pcie_vr9.h -+++ b/arch/mips/pci/ifxmips_pcie_vr9.h -@@ -22,8 +22,6 @@ - #include <linux/gpio.h> - #include <lantiq_soc.h> - --#define IFX_PCIE_GPIO_RESET 494 -- - #define IFX_REG_R32 ltq_r32 - #define IFX_REG_W32 ltq_w32 - #define CONFIG_IFX_PCIE_HW_SWAP -@@ -53,21 +51,6 @@ - #define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) - - --static inline void pcie_ep_gpio_rst_init(int pcie_port) --{ -- -- gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); -- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); -- gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -- --/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -- ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -- ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -- ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -- ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); -- ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ --} -- - static inline void pcie_ahb_pmu_setup(void) - { - /* Enable AHB bus master/slave */ -@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert - IFX_REG_W32(reg, IFX_RCU_RST_REQ); - } - --static inline void pcie_device_rst_assert(int pcie_port) --{ -- gpio_set_value(IFX_PCIE_GPIO_RESET, 0); --// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); --} -- --static inline void pcie_device_rst_deassert(int pcie_port) --{ -- mdelay(100); -- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); --// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); -- //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); --} -- - static inline void pcie_core_pmu_setup(int pcie_port) - { - struct clk *clk; diff --git a/target/linux/lantiq/patches-4.4/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-4.4/0152-lantiq-VPE.patch deleted file mode 100644 index 95a190c348..0000000000 --- a/target/linux/lantiq/patches-4.4/0152-lantiq-VPE.patch +++ /dev/null @@ -1,180 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -2221,6 +2221,12 @@ config MIPS_VPE_LOADER - Includes a loader for loading an elf relocatable object - onto another VPE and running it. - -+config IFX_VPE_EXT -+ bool "IFX APRP Extensions" -+ depends on MIPS_VPE_LOADER -+ help -+ IFX included extensions in APRP -+ - config MIPS_VPE_LOADER_CMP - bool - default "y" ---- a/arch/mips/include/asm/vpe.h -+++ b/arch/mips/include/asm/vpe.h -@@ -127,4 +127,13 @@ void cleanup_tc(struct tc *tc); - - int __init vpe_module_init(void); - void __exit vpe_module_exit(void); -+ -+/* For the explanation of the APIs please refer the section "MT APRP Kernel -+ * Programming" in AR9 SW Architecture Specification -+ */ -+int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags); -+int32_t vpe1_sw_stop(uint32_t flags); -+uint32_t vpe1_get_load_addr(uint32_t flags); -+uint32_t vpe1_get_max_mem(uint32_t flags); -+ - #endif /* _ASM_VPE_H */ ---- a/arch/mips/kernel/vpe-mt.c -+++ b/arch/mips/kernel/vpe-mt.c -@@ -29,6 +29,7 @@ int vpe_run(struct vpe *v) - struct vpe_notifications *notifier; - unsigned int vpeflags; - struct tc *t; -+ unsigned long physical_memsize = 0L; - - /* check we are the Master VPE */ - local_irq_save(flags); -@@ -417,6 +418,8 @@ int __init vpe_module_init(void) - } - - v->ntcs = hw_tcs - aprp_cpu_index(); -+ write_tc_c0_tcbind((read_tc_c0_tcbind() & -+ ~TCBIND_CURVPE) | 1); - - /* add the tc to the list of this vpe's tc's. */ - list_add(&t->tc, &v->tc); -@@ -519,3 +522,47 @@ void __exit vpe_module_exit(void) - release_vpe(v); - } - } -+ -+#ifdef CONFIG_IFX_VPE_EXT -+int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags) -+{ -+ enum vpe_state state; -+ struct vpe *v = get_vpe(tclimit); -+ struct vpe_notifications *not; -+ -+ if (tcmask || flags) { -+ pr_warn("Currently tcmask and flags should be 0. Other values are not supported\n"); -+ return -1; -+ } -+ -+ state = xchg(&v->state, VPE_STATE_INUSE); -+ if (state != VPE_STATE_UNUSED) { -+ vpe_stop(v); -+ -+ list_for_each_entry(not, &v->notify, list) { -+ not->stop(tclimit); -+ } -+ } -+ -+ v->__start = (unsigned long)sw_start_addr; -+ -+ if (!vpe_run(v)) { -+ pr_debug("VPE loader: VPE1 running successfully\n"); -+ return 0; -+ } -+ return -1; -+} -+EXPORT_SYMBOL(vpe1_sw_start); -+ -+int32_t vpe1_sw_stop(uint32_t flags) -+{ -+ struct vpe *v = get_vpe(tclimit); -+ -+ if (!vpe_free(v)) { -+ pr_debug("RP Stopped\n"); -+ return 0; -+ } else -+ return -1; -+} -+EXPORT_SYMBOL(vpe1_sw_stop); -+#endif ---- a/arch/mips/kernel/vpe.c -+++ b/arch/mips/kernel/vpe.c -@@ -49,6 +49,41 @@ struct vpe_control vpecontrol = { - .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) - }; - -+#ifdef CONFIG_IFX_VPE_EXT -+unsigned int vpe1_load_addr; -+ -+static int __init load_address(char *str) -+{ -+ get_option(&str, &vpe1_load_addr); -+ return 1; -+} -+__setup("vpe1_load_addr=", load_address); -+ -+static unsigned int vpe1_mem; -+static int __init vpe1mem(char *str) -+{ -+ vpe1_mem = memparse(str, &str); -+ return 1; -+} -+__setup("vpe1_mem=", vpe1mem); -+ -+uint32_t vpe1_get_load_addr(uint32_t flags) -+{ -+ return vpe1_load_addr; -+} -+EXPORT_SYMBOL(vpe1_get_load_addr); -+ -+uint32_t vpe1_get_max_mem(uint32_t flags) -+{ -+ if (!vpe1_mem) -+ return P_SIZE; -+ else -+ return vpe1_mem; -+} -+EXPORT_SYMBOL(vpe1_get_max_mem); -+ -+#endif -+ - /* get the vpe associated with this minor */ - struct vpe *get_vpe(int minor) - { ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -31,10 +31,14 @@ EXPORT_SYMBOL_GPL(ebu_lock); - */ - static struct ltq_soc_info soc_info; - -+/* for Multithreading (APRP), vpe.c will use it */ -+unsigned long cp0_memsize; -+ - const char *get_system_type(void) - { - return soc_info.sys_type; - } -+EXPORT_SYMBOL(ltq_soc_type); - - int ltq_soc_type(void) - { ---- a/arch/mips/include/asm/mipsmtregs.h -+++ b/arch/mips/include/asm/mipsmtregs.h -@@ -31,6 +31,9 @@ - #define read_c0_vpeconf1() __read_32bit_c0_register($1, 3) - #define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val) - -+#define read_c0_vpeopt() __read_32bit_c0_register($1, 7) -+#define write_c0_vpeopt(val) __write_32bit_c0_register($1, 7, val) -+ - #define read_c0_tcstatus() __read_32bit_c0_register($2, 1) - #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) - -@@ -376,6 +379,8 @@ do { \ - #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) - #define read_vpe_c0_vpeconf1() mftc0(1, 3) - #define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val) -+#define read_vpe_c0_vpeopt() mftc0(1, 7) -+#define write_vpe_c0_vpeopt(val) mttc0(1, 7, val) - #define read_vpe_c0_count() mftc0(9, 0) - #define write_vpe_c0_count(val) mttc0(9, 0, val) - #define read_vpe_c0_status() mftc0(12, 0) diff --git a/target/linux/lantiq/patches-4.4/0154-lantiq-pci-bar11mask-fix.patch b/target/linux/lantiq/patches-4.4/0154-lantiq-pci-bar11mask-fix.patch deleted file mode 100644 index df2c45f088..0000000000 --- a/target/linux/lantiq/patches-4.4/0154-lantiq-pci-bar11mask-fix.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/pci/pci-lantiq.c -+++ b/arch/mips/pci/pci-lantiq.c -@@ -62,6 +62,8 @@ - #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) - #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) - -+extern u32 max_low_pfn; -+ - __iomem void *ltq_pci_mapped_cfg; - static __iomem void *ltq_pci_membase; - -@@ -87,8 +89,8 @@ static inline u32 ltq_calc_bar11mask(voi - u32 mem, bar11mask; - - /* BAR11MASK value depends on available memory on system. */ -- mem = get_num_physpages() * PAGE_SIZE; -- bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; -+ mem = max_low_pfn << PAGE_SHIFT; -+ bar11mask = ((-roundup_pow_of_two(mem)) & 0x0F000000) | 8; - - return bar11mask; - } diff --git a/target/linux/lantiq/patches-4.4/0155-lantiq-VPE-nosmp.patch b/target/linux/lantiq/patches-4.4/0155-lantiq-VPE-nosmp.patch deleted file mode 100644 index 898c2d4821..0000000000 --- a/target/linux/lantiq/patches-4.4/0155-lantiq-VPE-nosmp.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/kernel/vpe-mt.c -+++ b/arch/mips/kernel/vpe-mt.c -@@ -132,7 +132,10 @@ int vpe_run(struct vpe *v) - * kernels need to turn it on, even if that wasn't the pre-dvpe() state. - */ - #ifdef CONFIG_SMP -- evpe(vpeflags); -+ if (!setup_max_cpus) /* nosmp is set */ -+ evpe(EVPE_ENABLE); -+ else -+ evpe(vpeflags); - #else - evpe(EVPE_ENABLE); - #endif diff --git a/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch deleted file mode 100644 index 087d923f7d..0000000000 --- a/target/linux/lantiq/patches-4.4/0160-owrt-lantiq-multiple-flash.patch +++ /dev/null @@ -1,222 +0,0 @@ ---- a/drivers/mtd/maps/lantiq-flash.c -+++ b/drivers/mtd/maps/lantiq-flash.c -@@ -19,6 +19,7 @@ - #include <linux/mtd/cfi.h> - #include <linux/platform_device.h> - #include <linux/mtd/physmap.h> -+#include <linux/mtd/concat.h> - #include <linux/of.h> - - #include <lantiq_soc.h> -@@ -38,13 +39,16 @@ enum { - LTQ_NOR_NORMAL - }; - -+#define MAX_RESOURCES 4 -+ - struct ltq_mtd { -- struct resource *res; -- struct mtd_info *mtd; -- struct map_info *map; -+ struct mtd_info *mtd[MAX_RESOURCES]; -+ struct mtd_info *cmtd; -+ struct map_info map[MAX_RESOURCES]; - }; - - static const char ltq_map_name[] = "ltq_nor"; -+static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL }; - - static map_word - ltq_read16(struct map_info *map, unsigned long adr) -@@ -108,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign - } - - static int -+ltq_mtd_remove(struct platform_device *pdev) -+{ -+ struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); -+ int i; -+ -+ if (ltq_mtd == NULL) -+ return 0; -+ -+ if (ltq_mtd->cmtd) { -+ mtd_device_unregister(ltq_mtd->cmtd); -+ if (ltq_mtd->cmtd != ltq_mtd->mtd[0]) -+ mtd_concat_destroy(ltq_mtd->cmtd); -+ } -+ -+ for (i = 0; i < MAX_RESOURCES; i++) { -+ if (ltq_mtd->mtd[i] != NULL) -+ map_destroy(ltq_mtd->mtd[i]); -+ } -+ -+ kfree(ltq_mtd); -+ -+ return 0; -+} -+ -+static int - ltq_mtd_probe(struct platform_device *pdev) - { - struct mtd_part_parser_data ppdata; - struct ltq_mtd *ltq_mtd; - struct cfi_private *cfi; -- int err; -+ int err = 0; -+ int i; -+ int devices_found = 0; -+ -+ static const char *rom_probe_types[] = { -+ "cfi_probe", "jedec_probe", NULL -+ }; -+ const char **type; - - if (of_machine_is_compatible("lantiq,falcon") && - (ltq_boot_select() != BS_FLASH)) { -@@ -127,75 +163,90 @@ ltq_mtd_probe(struct platform_device *pd - - platform_set_drvdata(pdev, ltq_mtd); - -- ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- if (!ltq_mtd->res) { -- dev_err(&pdev->dev, "failed to get memory resource\n"); -- return -ENOENT; -+ for (i = 0; i < pdev->num_resources; i++) { -+ printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n", -+ (unsigned long long)resource_size(&pdev->resource[i]), -+ (unsigned long long)pdev->resource[i].start); -+ -+ if (!devm_request_mem_region(&pdev->dev, -+ pdev->resource[i].start, -+ resource_size(&pdev->resource[i]), -+ dev_name(&pdev->dev))) { -+ dev_err(&pdev->dev, "Could not reserve memory region\n"); -+ return -ENOMEM; -+ } -+ -+ ltq_mtd->map[i].name = ltq_map_name; -+ ltq_mtd->map[i].bankwidth = 2; -+ ltq_mtd->map[i].read = ltq_read16; -+ ltq_mtd->map[i].write = ltq_write16; -+ ltq_mtd->map[i].copy_from = ltq_copy_from; -+ ltq_mtd->map[i].copy_to = ltq_copy_to; -+ -+ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) -+ ltq_mtd->map[i].phys = NO_XIP; -+ else -+ ltq_mtd->map[i].phys = pdev->resource[i].start; -+ ltq_mtd->map[i].size = resource_size(&pdev->resource[i]); -+ ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start, -+ ltq_mtd->map[i].size); -+ if (IS_ERR(ltq_mtd->map[i].virt)) -+ return PTR_ERR(ltq_mtd->map[i].virt); -+ -+ if (ltq_mtd->map[i].virt == NULL) { -+ dev_err(&pdev->dev, "Failed to ioremap flash region\n"); -+ err = PTR_ERR(ltq_mtd->map[i].virt); -+ goto err_out; -+ } -+ -+ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING; -+ for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++) -+ ltq_mtd->mtd[i] = do_map_probe(*type, <q_mtd->map[i]); -+ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL; -+ -+ if (!ltq_mtd->mtd[i]) { -+ dev_err(&pdev->dev, "probing failed\n"); -+ return -ENXIO; -+ } else { -+ devices_found++; -+ } -+ -+ ltq_mtd->mtd[i]->owner = THIS_MODULE; -+ ltq_mtd->mtd[i]->dev.parent = &pdev->dev; -+ -+ cfi = ltq_mtd->map[i].fldrv_priv; -+ cfi->addr_unlock1 ^= 1; -+ cfi->addr_unlock2 ^= 1; - } - -- ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), -- GFP_KERNEL); -- if (!ltq_mtd->map) -- return -ENOMEM; -+ if (devices_found == 1) { -+ ltq_mtd->cmtd = ltq_mtd->mtd[0]; -+ } else if (devices_found > 1) { -+ /* -+ * We detected multiple devices. Concatenate them together. -+ */ -+ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev)); -+ if (ltq_mtd->cmtd == NULL) -+ err = -ENXIO; -+ } - -- if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) -- ltq_mtd->map->phys = NO_XIP; -- else -- ltq_mtd->map->phys = ltq_mtd->res->start; -- ltq_mtd->res->start; -- ltq_mtd->map->size = resource_size(ltq_mtd->res); -- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); -- if (IS_ERR(ltq_mtd->map->virt)) -- return PTR_ERR(ltq_mtd->map->virt); -- -- ltq_mtd->map->name = ltq_map_name; -- ltq_mtd->map->bankwidth = 2; -- ltq_mtd->map->read = ltq_read16; -- ltq_mtd->map->write = ltq_write16; -- ltq_mtd->map->copy_from = ltq_copy_from; -- ltq_mtd->map->copy_to = ltq_copy_to; -- -- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING; -- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map); -- ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL; -- -- if (!ltq_mtd->mtd) { -- dev_err(&pdev->dev, "probing failed\n"); -- return -ENXIO; -- } -- -- ltq_mtd->mtd->dev.parent = &pdev->dev; -- -- cfi = ltq_mtd->map->fldrv_priv; -- cfi->addr_unlock1 ^= 1; -- cfi->addr_unlock2 ^= 1; -+ ltq_mtd->cmtd->dev.parent = &pdev->dev; - - ppdata.of_node = pdev->dev.of_node; -- err = mtd_device_parse_register(ltq_mtd->mtd, NULL, &ppdata, NULL, 0); -+ err = mtd_device_parse_register(ltq_mtd->cmtd, ltq_probe_types, -+ &ppdata, NULL, 0); - if (err) { - dev_err(&pdev->dev, "failed to add partitions\n"); -- goto err_destroy; -+ goto err_out; - } - - return 0; - --err_destroy: -- map_destroy(ltq_mtd->mtd); -+err_out: -+ ltq_mtd_remove(pdev); - return err; - } - --static int --ltq_mtd_remove(struct platform_device *pdev) --{ -- struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); -- -- if (ltq_mtd && ltq_mtd->mtd) { -- mtd_device_unregister(ltq_mtd->mtd); -- map_destroy(ltq_mtd->mtd); -- } -- return 0; --} -- - static const struct of_device_id ltq_mtd_match[] = { - { .compatible = "lantiq,nor" }, - {}, diff --git a/target/linux/lantiq/patches-4.4/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch b/target/linux/lantiq/patches-4.4/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch deleted file mode 100644 index 234a2527fc..0000000000 --- a/target/linux/lantiq/patches-4.4/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 58078a30038b578c26c532545448fe3746648390 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Thu, 29 Dec 2016 21:02:57 +0100 -Subject: [PATCH] MIPS: lantiq: lock DMA register accesses for SMP - -The DMA controller channel and port configuration is changed by -selecting the port or channel in one register and then update the -configuration in other registers. This has to be done in an atomic -operation. Previously only the local interrupts were deactivated which -works for single CPU systems. If the system supports SMP a better -locking is needed, use spinlocks instead. -On more recent SoCs (at least xrx200 and later) there are two memory -regions to change the configuration, there we could use one area for -each CPU and do not have to synchronize between the CPUs and more. - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> ---- - arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++++++------------------ - 1 file changed, 20 insertions(+), 18 deletions(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -20,6 +20,7 @@ - #include <linux/io.h> - #include <linux/dma-mapping.h> - #include <linux/module.h> -+#include <linux/spinlock.h> - #include <linux/clk.h> - #include <linux/err.h> - -@@ -59,16 +60,17 @@ - ltq_dma_membase + (z)) - - static void __iomem *ltq_dma_membase; -+static DEFINE_SPINLOCK(ltq_dma_lock); - - void - ltq_dma_enable_irq(struct ltq_dma_channel *ch) - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_enable_irq); - -@@ -77,10 +79,10 @@ ltq_dma_disable_irq(struct ltq_dma_chann - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_disable_irq); - -@@ -89,10 +91,10 @@ ltq_dma_ack_irq(struct ltq_dma_channel * - { - unsigned long flags; - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_ack_irq); - -@@ -101,11 +103,11 @@ ltq_dma_open(struct ltq_dma_channel *ch) - { - unsigned long flag; - -- local_irq_save(flag); -+ spin_lock_irqsave(<q_dma_lock, flag); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); -- ltq_dma_enable_irq(ch); -- local_irq_restore(flag); -+ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); -+ spin_unlock_irqrestore(<q_dma_lock, flag); - } - EXPORT_SYMBOL_GPL(ltq_dma_open); - -@@ -114,11 +116,11 @@ ltq_dma_close(struct ltq_dma_channel *ch - { - unsigned long flag; - -- local_irq_save(flag); -+ spin_lock_irqsave(<q_dma_lock, flag); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); -- ltq_dma_disable_irq(ch); -- local_irq_restore(flag); -+ ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); -+ spin_unlock_irqrestore(<q_dma_lock, flag); - } - EXPORT_SYMBOL_GPL(ltq_dma_close); - -@@ -133,7 +135,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch - &ch->phys, GFP_ATOMIC); - memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(ch->nr, LTQ_DMA_CS); - ltq_dma_w32(ch->phys, LTQ_DMA_CDBA); - ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN); -@@ -142,7 +144,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch - ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL); - while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST) - ; -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - - void -@@ -152,11 +154,11 @@ ltq_dma_alloc_tx(struct ltq_dma_channel - - ltq_dma_alloc(ch); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); - ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx); - -@@ -167,11 +169,11 @@ ltq_dma_alloc_rx(struct ltq_dma_channel - - ltq_dma_alloc(ch); - -- local_irq_save(flags); -+ spin_lock_irqsave(<q_dma_lock, flags); - ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); - ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); - ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL); -- local_irq_restore(flags); -+ spin_unlock_irqrestore(<q_dma_lock, flags); - } - EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx); - diff --git a/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch deleted file mode 100644 index d153c521d3..0000000000 --- a/target/linux/lantiq/patches-4.4/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/mtd/chips/cfi_cmdset_0001.c -+++ b/drivers/mtd/chips/cfi_cmdset_0001.c -@@ -39,7 +39,7 @@ - /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */ - - // debugging, turns off buffer write mode if set to 1 --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - /* Intel chips */ - #define I82802AB 0x00ad diff --git a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch deleted file mode 100644 index e42aaf9c07..0000000000 --- a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void) - } - } - -+static void set_phy_clock_source(struct device_node *np_cgu) -+{ -+ u32 phy_clk_src, ifcc; -+ -+ if (!np_cgu) -+ return; -+ -+ if (of_property_read_u32(np_cgu, "lantiq,phy-clk-src", &phy_clk_src)) -+ return; -+ -+ ifcc = ltq_cgu_r32(ifccr) & ~(0x1c); -+ ltq_cgu_w32(ifcc | (phy_clk_src << 2), ifccr); -+} -+ - /* bring up all register ranges that we need for basic system control */ - void __init ltq_soc_init(void) - { -@@ -628,4 +642,6 @@ void __init ltq_soc_init(void) - if (of_machine_is_compatible("lantiq,vr9")) - xbar_fpi_burst_disable(); - usb_set_clock(); -+ -+ set_phy_clock_source(np_cgu); - } diff --git a/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch b/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch deleted file mode 100644 index 7256208061..0000000000 --- a/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch +++ /dev/null @@ -1,184 +0,0 @@ ---- a/drivers/hwmon/Makefile -+++ b/drivers/hwmon/Makefile -@@ -107,6 +107,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222 - obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o - obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o - obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o -+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o - obj-$(CONFIG_SENSORS_MAX1111) += max1111.o - obj-$(CONFIG_SENSORS_MAX16065) += max16065.o - obj-$(CONFIG_SENSORS_MAX1619) += max1619.o ---- a/drivers/hwmon/Kconfig -+++ b/drivers/hwmon/Kconfig -@@ -753,6 +753,14 @@ config SENSORS_LTC4261 - This driver can also be built as a module. If so, the module will - be called ltc4261. - -+config SENSORS_LTQ_CPUTEMP -+ bool "Lantiq CPU temperature sensor" -+ depends on LANTIQ -+ default n -+ help -+ If you say yes here you get support for the temperature -+ sensor inside your CPU. -+ - config SENSORS_MAX1111 - tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" - depends on SPI_MASTER ---- /dev/null -+++ b/drivers/hwmon/ltq-cputemp.c -@@ -0,0 +1,154 @@ -+/* Lantiq CPU Temperatur sensor driver for xrx200 -+ * -+ * Copyright (C) 2016 Florian Eckert <feckert@tdt.de> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version -+ * -+ * This program is distributed in the hope that it will be useful -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, see <http://www.gnu.org/licenses/> -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/of_device.h> -+#include <linux/hwmon.h> -+#include <linux/hwmon-sysfs.h> -+ -+#include <lantiq_soc.h> -+ -+/* gphy1 configuration register contains cpu temperature */ -+#define CGU_GPHY1_CR 0x0040 -+#define CGU_TEMP_PD BIT(19) -+ -+static void ltq_cputemp_enable(void) -+{ -+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); -+ -+ /* wait a short moment to let the SoC get the first temperatur value */ -+ mdelay(100); -+} -+ -+static void ltq_cputemp_disable(void) -+{ -+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR); -+} -+ -+static int ltq_cputemp_read(void) -+{ -+ int value; -+ -+ /* get the temperature including one decimal place */ -+ value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF; -+ value = (value << 2 ) + value; -+ -+ /* range -38 to +154 °C, register value zero is -38.0 °C */ -+ value -= 380; -+ -+ return value; -+} -+ -+static ssize_t show_cputemp(struct device *dev, -+ struct device_attribute *attr, char *buf) -+{ -+ int value; -+ -+ value = ltq_cputemp_read(); -+ /* scale temp to millidegree */ -+ value = value * 100; -+ -+ return sprintf(buf, "%d\n", value); -+} -+ -+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL); -+ -+static struct attribute *ltq_cputemp_attrs[] = { -+ &dev_attr_temp1_input.attr, -+ NULL -+}; -+ -+ATTRIBUTE_GROUPS(ltq_cputemp); -+ -+static int ltq_cputemp_probe(struct platform_device *pdev) -+{ -+ int value = 0; -+ int ret; -+ struct device *hwmon_dev; -+ -+ /* available on vr9 v1.2 SoCs only */ -+ if (ltq_soc_type() != SOC_TYPE_VR9_2) -+ return -ENODEV; -+ -+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, -+ "CPU0", -+ NULL, -+ ltq_cputemp_groups); -+ -+ if (IS_ERR(hwmon_dev)) { -+ dev_err(&pdev->dev, "Failed to register as hwmon device"); -+ ret = PTR_ERR(hwmon_dev); -+ goto error_hwmon; -+ } -+ -+ ltq_cputemp_enable(); -+ value = ltq_cputemp_read(); -+ dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10); -+ -+ return 0; -+ -+error_hwmon: -+ return ret; -+} -+ -+static int ltq_cputemp_release(struct platform_device *pdev) -+{ -+ hwmon_device_unregister(&pdev->dev); -+ ltq_cputemp_disable(); -+ return 0; -+} -+ -+const struct of_device_id ltq_cputemp_match[] = { -+ { .compatible = "lantiq,cputemp" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ltq_cputemp_match); -+ -+static struct platform_driver ltq_cputemp_driver = { -+ .probe = ltq_cputemp_probe, -+ .remove = ltq_cputemp_release, -+ .driver = { -+ .name = "ltq-cputemp", -+ .owner = THIS_MODULE, -+ .of_match_table = ltq_cputemp_match, -+ }, -+}; -+ -+int __init init_ltq_cputemp(void) -+{ -+ int ret; -+ -+ ret = platform_driver_register(<q_cputemp_driver); -+ return ret; -+} -+ -+void clean_ltq_cputemp(void) -+{ -+ platform_driver_unregister(<q_cputemp_driver); -+ return; -+} -+ -+module_init(init_ltq_cputemp); -+module_exit(clean_ltq_cputemp); -+ -+MODULE_AUTHOR("Florian Eckert <feckert@tdt.de>"); -+ -+MODULE_DESCRIPTION("Lantiq Temperature Sensor"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-4.4/122-MIPS-store-the-appended-dtb-address-in-a-variable.patch b/target/linux/lantiq/patches-4.4/122-MIPS-store-the-appended-dtb-address-in-a-variable.patch deleted file mode 100644 index b707a8db0a..0000000000 --- a/target/linux/lantiq/patches-4.4/122-MIPS-store-the-appended-dtb-address-in-a-variable.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 15f37e1588920e010f20b53f04af94e91b8ee714 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski <jogo@openwrt.org> -Date: Mon, 20 Jun 2016 11:27:37 +0200 -Subject: [PATCH] MIPS: store the appended dtb address in a variable - -Instead of rewriting the arguments to match the UHI spec, store the -address of a appended or UHI supplied dtb in fw_supplied_dtb. - -That way the original bootloader arugments are kept intact while still -making the use of an appended dtb invisible for mach code. - -Mach code can still find out if it is an appended dtb by comparing -fw_arg1 with fw_supplied_dtb. - -Signed-off-by: Jonas Gorski <jogo@openwrt.org> -Cc: Kevin Cernekee <cernekee@gmail.com> -Cc: Florian Fainelli <f.fainelli@gmail.com> -Cc: John Crispin <john@phrozen.org> -Cc: Paul Burton <paul.burton@imgtec.com> -Cc: James Hogan <james.hogan@imgtec.com> -Cc: Alban Bedel <albeu@free.fr> -Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> -Cc: Antony Pavlov <antonynpavlov@gmail.com> -Cc: linux-mips@linux-mips.org -Patchwork: https://patchwork.linux-mips.org/patch/13699/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - arch/mips/ath79/setup.c | 4 ++-- - arch/mips/bmips/setup.c | 4 ++-- - arch/mips/include/asm/bootinfo.h | 4 ++++ - arch/mips/kernel/head.S | 21 ++++++++++++++------- - arch/mips/kernel/setup.c | 4 ++++ - arch/mips/lantiq/prom.c | 4 ++-- - arch/mips/pic32/pic32mzda/init.c | 4 ++-- - 7 files changed, 30 insertions(+), 15 deletions(-) - ---- a/arch/mips/lantiq/prom.c -+++ b/arch/mips/lantiq/prom.c -@@ -78,8 +78,8 @@ void __init plat_mem_setup(void) - - set_io_port_base((unsigned long) KSEG1); - -- if (fw_arg0 == -2) /* UHI interface */ -- dtb = (void *)fw_arg1; -+ if (fw_passed_dtb) /* UHI interface */ -+ dtb = (void *)fw_passed_dtb; - else if (__dtb_start != __dtb_end) - dtb = (void *)__dtb_start; - else |