1 files changed, 0 insertions, 49 deletions
diff --git a/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch
deleted file mode 100644
index 5030bbf3dd..0000000000
--- a/target/linux/lantiq/patches-4.14/0051-MIPS-lantiq-improve-USB-initialization.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 6 Jan 2017 17:40:12 +0100
-Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
-
-This adds code to initialize the USB controller and PHY also on Danube,
-Amazon SE and AR10. This code is based on the Vendor driver from
-different UGW versions and compared to the hardware documentation.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/lantiq/xway/sysctrl.c |  20 +++++++
- 2 files changed, 110 insertions(+), 30 deletions(-)
-
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk)
- 		pr_warn("deactivating PMU module failed!");
- }
- 
-+static void usb_set_clock(void)
-+{
-+	unsigned int val = ltq_cgu_r32(ifccr);
-+
-+	if (of_machine_is_compatible("lantiq,ar10") ||
-+	    of_machine_is_compatible("lantiq,grx390")) {
-+		val &= ~0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ar9") ||
-+		   of_machine_is_compatible("lantiq,vr9")) {
-+		/* TODO: this depends on the XTAL frequency */
-+		val |= 0x03; /* XTAL divided by 3 */
-+	} else if (of_machine_is_compatible("lantiq,ase")) {
-+		val |= 0x20; /* from XTAL */
-+	} else if (of_machine_is_compatible("lantiq,danube")) {
-+		val |= 0x30; /* 12 MHz, generated from 36 MHz */
-+	}
-+	ltq_cgu_w32(val, ifccr);
-+}
-+
- /* the pci enable helper */
- static int pci_enable(struct clk *clk)
- {
-@@ -569,4 +588,5 @@ void __init ltq_soc_init(void)
- 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
- 		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
- 	}
-+	usb_set_clock();
- }