1 files changed, 0 insertions, 163 deletions
diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts
deleted file mode 100644
index 8a73de9a26..0000000000
--- a/target/linux/lantiq/dts/VG3503J.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
-	model = "BT OpenReach VDSL Modem";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-
-		led-dsl = &dsl;
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			ranges = <0 0 0x0 0x3ffffff>;
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x00000 0x20000>;
-					};
-
-					partition@20000 {
-						label = "firmware";
-						reg = <0x20000 0x7d0000>;
-					};
-
-					partition@7f0000 {
-						label = "uboot-env";
-						reg = <0x7f0000 0x10000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				mdio {
-					lantiq,groups = "mdio";
-					lantiq,function = "mdio";
-				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led0", "gphy0 led1",
-							"gphy0 led2", "gphy1 led0",
-							"gphy1 led1", "gphy1 led2";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-	};
-
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		reset {
-			label = "reset";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_red: power2 {
-			label = "vg3503j:red:power";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		};
-		dsl: dsl {
-			label = "vg3503j:green:dsl";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		power_green: power {
-			label = "vg3503j:green:power";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
-
-&eth0 {
-	interface@0 {
-		compatible = "lantiq,xrx200-pdi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		lantiq,switch;
-		ethernet@2 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <2>;
-			phy-mode = "mii";
-			phy-handle = <&phy11>;
-		};
-		ethernet@4 {
-			compatible = "lantiq,xrx200-pdi-port";
-			reg = <4>;
-			phy-mode = "mii";
-			phy-handle = <&phy13>;
-		};
-	};
-
-	mdio@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "lantiq,xrx200-mdio";
-		phy11: ethernet-phy@11 {
-			reg = <0x11>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led1h = <0x70>;
-			lantiq,led1l = <0x00>;
-			lantiq,led2h = <0x00>;
-			lantiq,led2l = <0x03>;
-		};
-		phy13: ethernet-phy@13 {
-			reg = <0x13>;
-			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led1h = <0x70>;
-			lantiq,led1l = <0x00>;
-			lantiq,led2h = <0x00>;
-			lantiq,led2l = <0x03>;
-		};
-	};
-};