1 files changed, 0 insertions, 110 deletions
diff --git a/target/linux/lantiq/dts/EASY98000-base.dtsi b/target/linux/lantiq/dts/EASY98000-base.dtsi
deleted file mode 100644
index cfe1140ac1..0000000000
--- a/target/linux/lantiq/dts/EASY98000-base.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	compatible = "lantiq,easy98000", "lantiq,falcon";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	easy98000-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bootled_pins>;
-
-		LED_0 {
-			label = "easy98000:green:gpon";
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_1 {
-			label = "easy98000:red:gpon";
-			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_2 {
-			label = "easy98000:green:gpon_tx";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_3 {
-			label = "easy98000:green:gpon_rx";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_4 {
-			label = "easy98000:green:voice";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		LED_5 {
-			label = "easy98000:green:status";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-	};
-};
-
-&ebu_cs1 {
-	eth0: ethernet@0000000 {
-		compatible = "davicom,dm9000";
-		device_type = "network";
-		reg = <0x0000003 0x1>, <0x0000001 0x1>;
-		reg-names = "addr", "data";
-		interrupt-parent = <&gpio1>;
-		#interrupt-cells = <2>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-	};
-
-	cpld@3c00000 {
-		compatible = "lantiq,easy98000_addon";
-		reg = <0x3c00000 0x2>;
-	};
-
-	cpld@3c0000c {
-		compatible = "lantiq,easy98000_cpld_led";
-		reg = <0x3c0000c 0x2>,  <0x3c00012 0x2>;
-	};
-};
-
-/* // enable this for second uart:
-&serial1 {
-	status = "okay";
-};*/
-
-&spi {
-	status = "okay";
-
-	eeprom@1 {
-		compatible = "atmel,at25", "atmel,at25160n";
-		reg = <2>;
-		spi-max-frequency = <1000000>;
-		spi-cpha;
-		spi-cpol;
-
-		pagesize = <32>;
-		size = <2048>;
-		address-width = <16>;
-	};
-};
-
-&i2c {
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	/* eeprom-emulation by OMU */
-	eeprom@50 {
-		compatible = "at,24c02";
-		reg = <0x50>;
-	};
-	eeprom@51 {
-		compatible = "at,24c02";
-		reg = <0x51>;
-	};
-};
-