1 files changed, 0 insertions, 137 deletions
diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
deleted file mode 100644
index cca65f2141..0000000000
--- a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -256,6 +256,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-goflexhome.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,124 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Seagate GoFlex Home";
-+	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	aliases {
-+		led-boot = &led_health;
-+		led-failsafe = &led_fault;
-+		led-running = &led_health;
-+		led-upgrade = &led_fault;
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_white: pmx-led-white {
-+				marvell,pins = "mpp40";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp46";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led-orange {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+		};
-+		serial@12000 {
-+			status = "ok";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+	};
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		led_health: health {
-+			label = "status:green:health";
-+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+		};
-+		led_fault: fault {
-+			label = "status:orange:fault";
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+		misc {
-+			label = "status:white:misc";
-+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "disk-activity";
-+		};
-+	};
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_usb_power_enable>;
-+		pinctrl-names = "default";
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&nand {
-+	chip-delay = <40>;
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0x100000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "ubi";
-+		reg = <0x100000 0x0ff00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};