1 files changed, 0 insertions, 146 deletions
diff --git a/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
deleted file mode 100644
index 102cd76b49..0000000000
--- a/target/linux/ipq806x/patches-4.4/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From e81de9d28bd0421c236df322872e64edf4ee1852 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Mon, 11 May 2015 16:32:09 -0700
-Subject: [PATCH 7/8] ARM: dts: qcom: add mdio nodes to ap148 & db149
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 40 ++++++++++++++++++++++++++-
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 46 ++++++++++++++++++++++++++++++++
- 2 files changed, 85 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -19,8 +19,9 @@
- 		};
- 	};
- 
--	alias {
-+	aliases {
- 		serial0 = &uart4;
-+		mdio-gpio0 = &mdio0;
- 	};
- 
- 	chosen {
-@@ -65,6 +66,15 @@
- 					bias-bus-hold;
- 				};
- 			};
-+
-+			mdio0_pins: mdio0_pins {
-+				mux {
-+					pins = "gpio0", "gpio1";
-+					function = "gpio";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
- 		};
- 
- 		gsbi@16300000 {
-@@ -160,6 +170,34 @@
- 
- 			linux,part-probe = "qcom-smem";
- 		};
-+
-+		mdio0: mdio {
-+			compatible = "virtual,mdio-gpio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+			pinctrl-0 = <&mdio0_pins>;
-+			pinctrl-names = "default";
-+
-+			phy0: ethernet-phy@0 {
-+				device_type = "ethernet-phy";
-+				reg = <0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x7600000   /* PAD0_MODE */
-+					0x00008 0x1000000   /* PAD5_MODE */
-+					0x0000c 0x80        /* PAD6_MODE */
-+					0x000e4 0x6a545     /* MAC_POWER_SEL */
-+					0x000e0 0xc74164de  /* SGMII_CTRL */
-+					0x0007c 0x4e        /* PORT0_STATUS */
-+					0x00094 0x4e        /* PORT6_STATUS */
-+					>;
-+			};
-+
-+			phy4: ethernet-phy@4 {
-+				device_type = "ethernet-phy";
-+				reg = <4>;
-+			};
-+		};
- 	};
- };
- 
---- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
-@@ -16,6 +16,7 @@
- 
- 	alias {
- 		serial0 = &uart2;
-+		mdio-gpio0 = &mdio0;
- 	};
- 
- 	chosen {
-@@ -38,6 +39,15 @@
- 					bias-none;
- 				};
- 			};
-+
-+			mdio0_pins: mdio0_pins {
-+				mux {
-+					pins = "gpio0", "gpio1";
-+					function = "gpio";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
- 		};
- 
- 		gsbi2: gsbi@12480000 {
-@@ -140,5 +150,44 @@
- 		pcie2: pci@1b900000 {
- 			status = "ok";
- 		};
-+
-+		mdio0: mdio {
-+			compatible = "virtual,mdio-gpio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+			pinctrl-0 = <&mdio0_pins>;
-+			pinctrl-names = "default";
-+
-+			phy0: ethernet-phy@0 {
-+				device_type = "ethernet-phy";
-+				reg = <0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x7600000   /* PAD0_MODE */
-+					0x00008 0x1000000   /* PAD5_MODE */
-+					0x0000c 0x80        /* PAD6_MODE */
-+					0x000e4 0x6a545     /* MAC_POWER_SEL */
-+					0x000e0 0xc74164de  /* SGMII_CTRL */
-+					0x0007c 0x4e        /* PORT0_STATUS */
-+					0x00094 0x4e        /* PORT6_STATUS */
-+				>;
-+			};
-+
-+			phy4: ethernet-phy@4 {
-+				device_type = "ethernet-phy";
-+				reg = <4>;
-+			};
-+
-+			phy6: ethernet-phy@6 {
-+				device_type = "ethernet-phy";
-+				reg = <6>;
-+			};
-+
-+			phy7: ethernet-phy@7 {
-+				device_type = "ethernet-phy";
-+				reg = <7>;
-+			};
-+		};
- 	};
- };