1 files changed, 0 insertions, 142 deletions
diff --git a/target/linux/ipq806x/patches-4.19/0034-0003-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.19/0034-0003-clk-qcom-Add-HFPLL-driver.patch
deleted file mode 100644
index 292eb66d67..0000000000
--- a/target/linux/ipq806x/patches-4.19/0034-0003-clk-qcom-Add-HFPLL-driver.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From cb546b797a0da4dbb1a0c76a2a357921887b6189 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Tue, 14 Aug 2018 17:42:22 +0530
-Subject: [PATCH 03/12] clk: qcom: Add HFPLL driver
-
-On some devices (MSM8974 for example), the HFPLLs are
-instantiated within the Krait processor subsystem as separate
-register regions. Add a driver for these PLLs so that we can
-provide HFPLL clocks for use by the system.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
-Tested-by: Craig Tatlor <ctatlor97@gmail.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/qcom/Kconfig  |  8 ++++
- drivers/clk/qcom/Makefile |  1 +
- drivers/clk/qcom/hfpll.c  | 96 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 105 insertions(+)
- create mode 100644 drivers/clk/qcom/hfpll.c
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -272,3 +272,11 @@ config SPMI_PMIC_CLKDIV
- 	  Technologies, Inc. SPMI PMIC. It configures the frequency of
- 	  clkdiv outputs of the PMIC. These clocks are typically wired
- 	  through alternate functions on GPIO pins.
-+
-+config QCOM_HFPLL
-+	tristate "High-Frequency PLL (HFPLL) Clock Controller"
-+	depends on COMMON_CLK_QCOM
-+	help
-+	  Support for the high-frequency PLLs present on Qualcomm devices.
-+	  Say Y if you want to support CPU frequency scaling on devices
-+	  such as MSM8974, APQ8084, etc.
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -44,3 +44,4 @@ obj-$(CONFIG_SDM_DISPCC_845) += dispcc-s
- obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
- obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
- obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
-+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
---- /dev/null
-+++ b/drivers/clk/qcom/hfpll.c
-@@ -0,0 +1,96 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/regmap.h>
-+
-+#include "clk-regmap.h"
-+#include "clk-hfpll.h"
-+
-+static const struct hfpll_data hdata = {
-+	.mode_reg = 0x00,
-+	.l_reg = 0x04,
-+	.m_reg = 0x08,
-+	.n_reg = 0x0c,
-+	.user_reg = 0x10,
-+	.config_reg = 0x14,
-+	.config_val = 0x430405d,
-+	.status_reg = 0x1c,
-+	.lock_bit = 16,
-+
-+	.user_val = 0x8,
-+	.user_vco_mask = 0x100000,
-+	.low_vco_max_rate = 1248000000,
-+	.min_rate = 537600000UL,
-+	.max_rate = 2900000000UL,
-+};
-+
-+static const struct of_device_id qcom_hfpll_match_table[] = {
-+	{ .compatible = "qcom,hfpll" },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
-+
-+static const struct regmap_config hfpll_regmap_config = {
-+	.reg_bits	= 32,
-+	.reg_stride	= 4,
-+	.val_bits	= 32,
-+	.max_register	= 0x30,
-+	.fast_io	= true,
-+};
-+
-+static int qcom_hfpll_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	struct device *dev = &pdev->dev;
-+	void __iomem *base;
-+	struct regmap *regmap;
-+	struct clk_hfpll *h;
-+	struct clk_init_data init = {
-+		.parent_names = (const char *[]){ "xo" },
-+		.num_parents = 1,
-+		.ops = &clk_ops_hfpll,
-+	};
-+
-+	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
-+	if (!h)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	base = devm_ioremap_resource(dev, res);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
-+
-+	regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
-+	if (IS_ERR(regmap))
-+		return PTR_ERR(regmap);
-+
-+	if (of_property_read_string_index(dev->of_node, "clock-output-names",
-+					  0, &init.name))
-+		return -ENODEV;
-+
-+	h->d = &hdata;
-+	h->clkr.hw.init = &init;
-+	spin_lock_init(&h->lock);
-+
-+	return devm_clk_register_regmap(&pdev->dev, &h->clkr);
-+}
-+
-+static struct platform_driver qcom_hfpll_driver = {
-+	.probe		= qcom_hfpll_probe,
-+	.driver		= {
-+		.name	= "qcom-hfpll",
-+		.of_match_table = qcom_hfpll_match_table,
-+	},
-+};
-+module_platform_driver(qcom_hfpll_driver);
-+
-+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-hfpll");