diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch b/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch new file mode 100644 index 0000000000..4b2c9b5b6d --- /dev/null +++ b/target/linux/ipq806x/patches-4.0/703-stmmac-add-fixed-link-device-tree-support.patch @@ -0,0 +1,64 @@ +From 3a95f75867be562cb919ff23a738f70357188fbd Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari <mathieu@codeaurora.org> +Date: Fri, 8 May 2015 16:02:03 -0700 +Subject: [PATCH 3/8] stmmac: add fixed-link device-tree support + +In case DT is used, this change adds the ability to the stmmac driver to +detect a fixed-link PHY, instanciate it, and use it during +phy_connect(). + +Fixed link PHYs DT usage is described in: +Documentation/devicetree/bindings/net/fixed-link.txt + +Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> +--- + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- + drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 +++++++++++- + 2 files changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +@@ -856,7 +856,7 @@ static int stmmac_init_phy(struct net_de + * device as well. + * Note: phydev->phy_id is the result of reading the UID PHY registers. + */ +- if (phydev->phy_id == 0) { ++ if (!priv->plat->phy_node && phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +@@ -176,6 +176,14 @@ static int stmmac_probe_config_dt(struct + /* If we find a phy-handle property, use it as the PHY */ + plat->phy_node = of_parse_phandle(np, "phy-handle", 0); + ++ /* If phy-handle is not specified, check if we have a fixed-phy */ ++ if (!plat->phy_node && of_phy_is_fixed_link(np)) { ++ if ((of_phy_register_fixed_link(np) < 0)) ++ return -ENODEV; ++ ++ plat->phy_node = of_node_get(np); ++ } ++ + /* "snps,phy-addr" is not a standard property. Mark it as deprecated + * and warn of its use. Remove this when phy node support is added. + */ +@@ -238,7 +246,7 @@ static int stmmac_probe_config_dt(struct + GFP_KERNEL); + if (!dma_cfg) { + ret = -ENOMEM; +- goto err; ++ goto err2; + } + plat->dma_cfg = dma_cfg; + of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); +@@ -258,6 +266,8 @@ static int stmmac_probe_config_dt(struct + + return 0; + ++err2: ++ of_node_put(np); + err: + return ret; + } |