aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch')
-rw-r--r--target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch579
1 files changed, 0 insertions, 579 deletions
diff --git a/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch b/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch
deleted file mode 100644
index 1690415265..0000000000
--- a/target/linux/ipq40xx/patches-4.14/088-0012-i2c-qup-reorganization-of-driver-code-to-remove-poll.patch
+++ /dev/null
@@ -1,579 +0,0 @@
-From fbfab1ab065879370541caf0e514987368eb41b2 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Mon, 12 Mar 2018 18:45:01 +0530
-Subject: [PATCH 12/13] i2c: qup: reorganization of driver code to remove
- polling for qup v1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Following are the major issues in current driver code
-
-1. The current driver simply assumes the transfer completion
- whenever its gets any non-error interrupts and then simply do the
- polling of available/free bytes in FIFO.
-2. The block mode is not working properly since no handling in
- being done for OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ.
-
-Because of above, i2c v1 transfers of size greater than 32 are failing
-with following error message
-
- i2c_qup 78b6000.i2c: timeout for fifo out full
-
-To make block mode working properly and move to use the interrupts
-instead of polling, major code reorganization is required. Following
-are the major changes done in this patch
-
-1. Remove the polling of TX FIFO free space and RX FIFO available
- bytes and move to interrupts completely. QUP has QUP_MX_OUTPUT_DONE,
- QUP_MX_INPUT_DONE, OUT_BLOCK_WRITE_REQ and IN_BLOCK_READ_REQ
- interrupts to handle FIFO’s properly so check all these interrupts.
-2. During write, For FIFO mode, TX FIFO can be directly written
- without checking for FIFO space. For block mode, the QUP will generate
- OUT_BLOCK_WRITE_REQ interrupt whenever it has block size of available
- space.
-3. During read, both TX and RX FIFO will be used. TX will be used
- for writing tags and RX will be used for receiving the data. In QUP,
- TX and RX can operate in separate mode so configure modes accordingly.
-4. For read FIFO mode, wait for QUP_MX_INPUT_DONE interrupt which
- will be generated after all the bytes have been copied in RX FIFO. For
- read Block mode, QUP will generate IN_BLOCK_READ_REQ interrupts
- whenever it has block size of available data.
-
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
-Reviewed-by: Sricharan R <sricharan@codeaurora.org>
-Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
----
- drivers/i2c/busses/i2c-qup.c | 366 +++++++++++++++++++++--------------
- 1 file changed, 223 insertions(+), 143 deletions(-)
-
---- a/drivers/i2c/busses/i2c-qup.c
-+++ b/drivers/i2c/busses/i2c-qup.c
-@@ -64,8 +64,11 @@
- #define QUP_IN_SVC_FLAG BIT(9)
- #define QUP_MX_OUTPUT_DONE BIT(10)
- #define QUP_MX_INPUT_DONE BIT(11)
-+#define OUT_BLOCK_WRITE_REQ BIT(12)
-+#define IN_BLOCK_READ_REQ BIT(13)
-
- /* I2C mini core related values */
-+#define QUP_NO_INPUT BIT(7)
- #define QUP_CLOCK_AUTO_GATE BIT(13)
- #define I2C_MINI_CORE (2 << 8)
- #define I2C_N_VAL 15
-@@ -137,13 +140,36 @@
- #define DEFAULT_CLK_FREQ 100000
- #define DEFAULT_SRC_CLK 20000000
-
-+/*
-+ * count: no of blocks
-+ * pos: current block number
-+ * tx_tag_len: tx tag length for current block
-+ * rx_tag_len: rx tag length for current block
-+ * data_len: remaining data length for current message
-+ * total_tx_len: total tx length including tag bytes for current QUP transfer
-+ * total_rx_len: total rx length including tag bytes for current QUP transfer
-+ * tx_fifo_free: number of free bytes in current QUP block write.
-+ * fifo_available: number of available bytes in RX FIFO for current
-+ * QUP block read
-+ * rx_bytes_read: if all the bytes have been read from rx FIFO.
-+ * is_tx_blk_mode: whether tx uses block or FIFO mode in case of non BAM xfer.
-+ * is_rx_blk_mode: whether rx uses block or FIFO mode in case of non BAM xfer.
-+ * tags: contains tx tag bytes for current QUP transfer
-+ */
- struct qup_i2c_block {
-- int count;
-- int pos;
-- int tx_tag_len;
-- int rx_tag_len;
-- int data_len;
-- u8 tags[6];
-+ int count;
-+ int pos;
-+ int tx_tag_len;
-+ int rx_tag_len;
-+ int data_len;
-+ int total_tx_len;
-+ int total_rx_len;
-+ int tx_fifo_free;
-+ int fifo_available;
-+ bool rx_bytes_read;
-+ bool is_tx_blk_mode;
-+ bool is_rx_blk_mode;
-+ u8 tags[6];
- };
-
- struct qup_i2c_tag {
-@@ -186,6 +212,7 @@ struct qup_i2c_dev {
-
- /* To check if this is the last msg */
- bool is_last;
-+ bool is_qup_v1;
-
- /* To configure when bus is in run state */
- int config_run;
-@@ -202,11 +229,18 @@ struct qup_i2c_dev {
- struct qup_i2c_bam btx;
-
- struct completion xfer;
-+ /* function to write data in tx fifo */
-+ void (*write_tx_fifo)(struct qup_i2c_dev *qup);
-+ /* function to read data from rx fifo */
-+ void (*read_rx_fifo)(struct qup_i2c_dev *qup);
-+ /* function to write tags in tx fifo for i2c read transfer */
-+ void (*write_rx_tags)(struct qup_i2c_dev *qup);
- };
-
- static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
- {
- struct qup_i2c_dev *qup = dev;
-+ struct qup_i2c_block *blk = &qup->blk;
- u32 bus_err;
- u32 qup_err;
- u32 opflags;
-@@ -253,12 +287,48 @@ static irqreturn_t qup_i2c_interrupt(int
- goto done;
- }
-
-- if (opflags & QUP_IN_SVC_FLAG)
-- writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
-+ if (!qup->is_qup_v1)
-+ goto done;
-
-- if (opflags & QUP_OUT_SVC_FLAG)
-+ if (opflags & QUP_OUT_SVC_FLAG) {
- writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
-
-+ if (opflags & OUT_BLOCK_WRITE_REQ) {
-+ blk->tx_fifo_free += qup->out_blk_sz;
-+ if (qup->msg->flags & I2C_M_RD)
-+ qup->write_rx_tags(qup);
-+ else
-+ qup->write_tx_fifo(qup);
-+ }
-+ }
-+
-+ if (opflags & QUP_IN_SVC_FLAG) {
-+ writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
-+
-+ if (!blk->is_rx_blk_mode) {
-+ blk->fifo_available += qup->in_fifo_sz;
-+ qup->read_rx_fifo(qup);
-+ } else if (opflags & IN_BLOCK_READ_REQ) {
-+ blk->fifo_available += qup->in_blk_sz;
-+ qup->read_rx_fifo(qup);
-+ }
-+ }
-+
-+ if (qup->msg->flags & I2C_M_RD) {
-+ if (!blk->rx_bytes_read)
-+ return IRQ_HANDLED;
-+ } else {
-+ /*
-+ * Ideally, QUP_MAX_OUTPUT_DONE_FLAG should be checked
-+ * for FIFO mode also. But, QUP_MAX_OUTPUT_DONE_FLAG lags
-+ * behind QUP_OUTPUT_SERVICE_FLAG sometimes. The only reason
-+ * of interrupt for write message in FIFO mode is
-+ * QUP_MAX_OUTPUT_DONE_FLAG condition.
-+ */
-+ if (blk->is_tx_blk_mode && !(opflags & QUP_MX_OUTPUT_DONE))
-+ return IRQ_HANDLED;
-+ }
-+
- done:
- qup->qup_err = qup_err;
- qup->bus_err = bus_err;
-@@ -324,6 +394,28 @@ static int qup_i2c_change_state(struct q
- return 0;
- }
-
-+/* Check if I2C bus returns to IDLE state */
-+static int qup_i2c_bus_active(struct qup_i2c_dev *qup, int len)
-+{
-+ unsigned long timeout;
-+ u32 status;
-+ int ret = 0;
-+
-+ timeout = jiffies + len * 4;
-+ for (;;) {
-+ status = readl(qup->base + QUP_I2C_STATUS);
-+ if (!(status & I2C_STATUS_BUS_ACTIVE))
-+ break;
-+
-+ if (time_after(jiffies, timeout))
-+ ret = -ETIMEDOUT;
-+
-+ usleep_range(len, len * 2);
-+ }
-+
-+ return ret;
-+}
-+
- /**
- * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path
- * @qup: The qup_i2c_dev device
-@@ -394,23 +486,6 @@ static void qup_i2c_set_write_mode_v2(st
- }
- }
-
--static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
--{
-- /* Number of entries to shift out, including the start */
-- int total = msg->len + 1;
--
-- if (total < qup->out_fifo_sz) {
-- /* FIFO mode */
-- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
-- writel(total, qup->base + QUP_MX_WRITE_CNT);
-- } else {
-- /* BLOCK mode (transfer data on chunks) */
-- writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
-- qup->base + QUP_IO_MODE);
-- writel(total, qup->base + QUP_MX_OUTPUT_CNT);
-- }
--}
--
- static int check_for_fifo_space(struct qup_i2c_dev *qup)
- {
- int ret;
-@@ -443,28 +518,25 @@ out:
- return ret;
- }
-
--static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
-+static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup)
- {
-+ struct qup_i2c_block *blk = &qup->blk;
-+ struct i2c_msg *msg = qup->msg;
- u32 addr = msg->addr << 1;
- u32 qup_tag;
- int idx;
- u32 val;
-- int ret = 0;
-
- if (qup->pos == 0) {
- val = QUP_TAG_START | addr;
- idx = 1;
-+ blk->tx_fifo_free--;
- } else {
- val = 0;
- idx = 0;
- }
-
-- while (qup->pos < msg->len) {
-- /* Check that there's space in the FIFO for our pair */
-- ret = check_for_fifo_space(qup);
-- if (ret)
-- return ret;
--
-+ while (blk->tx_fifo_free && qup->pos < msg->len) {
- if (qup->pos == msg->len - 1)
- qup_tag = QUP_TAG_STOP;
- else
-@@ -481,11 +553,8 @@ static int qup_i2c_issue_write(struct qu
-
- qup->pos++;
- idx++;
-+ blk->tx_fifo_free--;
- }
--
-- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
--
-- return ret;
- }
-
- static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup,
-@@ -1006,64 +1075,6 @@ err:
- return ret;
- }
-
--static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
--{
-- int ret;
--
-- qup->msg = msg;
-- qup->pos = 0;
--
-- enable_irq(qup->irq);
--
-- qup_i2c_set_write_mode(qup, msg);
--
-- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
-- if (ret)
-- goto err;
--
-- writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
--
-- do {
-- ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
-- if (ret)
-- goto err;
--
-- ret = qup_i2c_issue_write(qup, msg);
-- if (ret)
-- goto err;
--
-- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
-- if (ret)
-- goto err;
--
-- ret = qup_i2c_wait_for_complete(qup, msg);
-- if (ret)
-- goto err;
-- } while (qup->pos < msg->len);
--
-- /* Wait for the outstanding data in the fifo to drain */
-- ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
--err:
-- disable_irq(qup->irq);
-- qup->msg = NULL;
--
-- return ret;
--}
--
--static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
--{
-- if (len < qup->in_fifo_sz) {
-- /* FIFO mode */
-- writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
-- writel(len, qup->base + QUP_MX_READ_CNT);
-- } else {
-- /* BLOCK mode (transfer data on chunks) */
-- writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
-- qup->base + QUP_IO_MODE);
-- writel(len, qup->base + QUP_MX_INPUT_CNT);
-- }
--}
--
- static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len)
- {
- int tx_len = qup->blk.tx_tag_len;
-@@ -1086,44 +1097,27 @@ static void qup_i2c_set_read_mode_v2(str
- }
- }
-
--static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
--{
-- u32 addr, len, val;
--
-- addr = i2c_8bit_addr_from_msg(msg);
--
-- /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
-- len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
--
-- val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
-- writel(val, qup->base + QUP_OUT_FIFO_BASE);
--}
--
--
--static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
-+static void qup_i2c_read_rx_fifo_v1(struct qup_i2c_dev *qup)
- {
-+ struct qup_i2c_block *blk = &qup->blk;
-+ struct i2c_msg *msg = qup->msg;
- u32 val = 0;
-- int idx;
-- int ret = 0;
-+ int idx = 0;
-
-- for (idx = 0; qup->pos < msg->len; idx++) {
-+ while (blk->fifo_available && qup->pos < msg->len) {
- if ((idx & 1) == 0) {
-- /* Check that FIFO have data */
-- ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
-- SET_BIT, 4 * ONE_BYTE);
-- if (ret)
-- return ret;
--
- /* Reading 2 words at time */
- val = readl(qup->base + QUP_IN_FIFO_BASE);
--
- msg->buf[qup->pos++] = val & 0xFF;
- } else {
- msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
- }
-+ idx++;
-+ blk->fifo_available--;
- }
-
-- return ret;
-+ if (qup->pos == msg->len)
-+ blk->rx_bytes_read = true;
- }
-
- static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
-@@ -1224,49 +1218,130 @@ err:
- return ret;
- }
-
--static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
-+static void qup_i2c_write_rx_tags_v1(struct qup_i2c_dev *qup)
- {
-- int ret;
-+ struct i2c_msg *msg = qup->msg;
-+ u32 addr, len, val;
-
-- qup->msg = msg;
-- qup->pos = 0;
-+ addr = i2c_8bit_addr_from_msg(msg);
-
-- enable_irq(qup->irq);
-- qup_i2c_set_read_mode(qup, msg->len);
-+ /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
-+ len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
-+
-+ val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
-+ writel(val, qup->base + QUP_OUT_FIFO_BASE);
-+}
-+
-+static void qup_i2c_conf_v1(struct qup_i2c_dev *qup)
-+{
-+ struct qup_i2c_block *blk = &qup->blk;
-+ u32 qup_config = I2C_MINI_CORE | I2C_N_VAL;
-+ u32 io_mode = QUP_REPACK_EN;
-+
-+ blk->is_tx_blk_mode =
-+ blk->total_tx_len > qup->out_fifo_sz ? true : false;
-+ blk->is_rx_blk_mode =
-+ blk->total_rx_len > qup->in_fifo_sz ? true : false;
-+
-+ if (blk->is_tx_blk_mode) {
-+ io_mode |= QUP_OUTPUT_BLK_MODE;
-+ writel(0, qup->base + QUP_MX_WRITE_CNT);
-+ writel(blk->total_tx_len, qup->base + QUP_MX_OUTPUT_CNT);
-+ } else {
-+ writel(0, qup->base + QUP_MX_OUTPUT_CNT);
-+ writel(blk->total_tx_len, qup->base + QUP_MX_WRITE_CNT);
-+ }
-+
-+ if (blk->total_rx_len) {
-+ if (blk->is_rx_blk_mode) {
-+ io_mode |= QUP_INPUT_BLK_MODE;
-+ writel(0, qup->base + QUP_MX_READ_CNT);
-+ writel(blk->total_rx_len, qup->base + QUP_MX_INPUT_CNT);
-+ } else {
-+ writel(0, qup->base + QUP_MX_INPUT_CNT);
-+ writel(blk->total_rx_len, qup->base + QUP_MX_READ_CNT);
-+ }
-+ } else {
-+ qup_config |= QUP_NO_INPUT;
-+ }
-+
-+ writel(qup_config, qup->base + QUP_CONFIG);
-+ writel(io_mode, qup->base + QUP_IO_MODE);
-+}
-
-+static void qup_i2c_clear_blk_v1(struct qup_i2c_block *blk)
-+{
-+ blk->tx_fifo_free = 0;
-+ blk->fifo_available = 0;
-+ blk->rx_bytes_read = false;
-+}
-+
-+static int qup_i2c_conf_xfer_v1(struct qup_i2c_dev *qup, bool is_rx)
-+{
-+ struct qup_i2c_block *blk = &qup->blk;
-+ int ret;
-+
-+ qup_i2c_clear_blk_v1(blk);
-+ qup_i2c_conf_v1(qup);
- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
- if (ret)
-- goto err;
-+ return ret;
-
- writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
-
- ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
- if (ret)
-- goto err;
-+ return ret;
-+
-+ reinit_completion(&qup->xfer);
-+ enable_irq(qup->irq);
-+ if (!blk->is_tx_blk_mode) {
-+ blk->tx_fifo_free = qup->out_fifo_sz;
-
-- qup_i2c_issue_read(qup, msg);
-+ if (is_rx)
-+ qup_i2c_write_rx_tags_v1(qup);
-+ else
-+ qup_i2c_write_tx_fifo_v1(qup);
-+ }
-
- ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
- if (ret)
- goto err;
-
-- do {
-- ret = qup_i2c_wait_for_complete(qup, msg);
-- if (ret)
-- goto err;
-+ ret = qup_i2c_wait_for_complete(qup, qup->msg);
-+ if (ret)
-+ goto err;
-
-- ret = qup_i2c_read_fifo(qup, msg);
-- if (ret)
-- goto err;
-- } while (qup->pos < msg->len);
-+ ret = qup_i2c_bus_active(qup, ONE_BYTE);
-
- err:
- disable_irq(qup->irq);
-- qup->msg = NULL;
--
- return ret;
- }
-
-+static int qup_i2c_write_one(struct qup_i2c_dev *qup)
-+{
-+ struct i2c_msg *msg = qup->msg;
-+ struct qup_i2c_block *blk = &qup->blk;
-+
-+ qup->pos = 0;
-+ blk->total_tx_len = msg->len + 1;
-+ blk->total_rx_len = 0;
-+
-+ return qup_i2c_conf_xfer_v1(qup, false);
-+}
-+
-+static int qup_i2c_read_one(struct qup_i2c_dev *qup)
-+{
-+ struct qup_i2c_block *blk = &qup->blk;
-+
-+ qup->pos = 0;
-+ blk->total_tx_len = 2;
-+ blk->total_rx_len = qup->msg->len;
-+
-+ return qup_i2c_conf_xfer_v1(qup, true);
-+}
-+
- static int qup_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg msgs[],
- int num)
-@@ -1305,10 +1380,11 @@ static int qup_i2c_xfer(struct i2c_adapt
- goto out;
- }
-
-+ qup->msg = &msgs[idx];
- if (msgs[idx].flags & I2C_M_RD)
-- ret = qup_i2c_read_one(qup, &msgs[idx]);
-+ ret = qup_i2c_read_one(qup);
- else
-- ret = qup_i2c_write_one(qup, &msgs[idx]);
-+ ret = qup_i2c_write_one(qup);
-
- if (ret)
- break;
-@@ -1487,6 +1563,10 @@ static int qup_i2c_probe(struct platform
- if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
- qup->adap.algo = &qup_i2c_algo;
- qup->adap.quirks = &qup_i2c_quirks;
-+ qup->is_qup_v1 = true;
-+ qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1;
-+ qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1;
-+ qup->write_rx_tags = qup_i2c_write_rx_tags_v1;
- } else {
- qup->adap.algo = &qup_i2c_algo_v2;
- ret = qup_i2c_req_dma(qup);
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-25 23:31:07 +0000